SYMBOL-WS5000-MIB

File: SYMBOL-WS5000-MIB.mib (729646 bytes)

Imported modules

RFC1213-MIB	SNMPv2-CONF	SNMPv2-SMI
SNMPv2-TC

Imported symbols

DisplayString	OBJECT-GROUP	MODULE-COMPLIANCE
NOTIFICATION-GROUP	enterprises	TimeTicks
IpAddress	Integer32	Unsigned32
Gauge32	Counter32	Counter64
OBJECT-TYPE	MODULE-IDENTITY	OBJECT-IDENTITY
NOTIFICATION-TYPE	TEXTUAL-CONVENTION

Defined Types

DoActionNow
INTEGER	doActionRightNow(1), idleState(2)

MultiPointer63
BITS	null(0), referToEntry001(1), referToEntry002(2), referToEntry003(3), referToEntry004(4), referToEntry005(5), referToEntry006(6), referToEntry007(7), referToEntry008(8), referToEntry009(9), referToEntry010(10), referToEntry011(11), referToEntry012(12), referToEntry013(13), referToEntry014(14), referToEntry015(15), referToEntry016(16), referToEntry017(17), referToEntry018(18), referToEntry019(19), referToEntry020(20), referToEntry021(21), referToEntry022(22), referToEntry023(23), referToEntry024(24), referToEntry025(25), referToEntry026(26), referToEntry027(27), referToEntry028(28), referToEntry029(29), referToEntry030(30), referToEntry031(31), referToEntry032(32), referToEntry033(33), referToEntry034(34), referToEntry035(35), referToEntry036(36), referToEntry037(37), referToEntry038(38), referToEntry039(39), referToEntry040(40), referToEntry041(41), referToEntry042(42), referToEntry043(43), referToEntry044(44), referToEntry045(45), referToEntry046(46), referToEntry047(47), referToEntry048(48), referToEntry049(49), referToEntry050(50), referToEntry051(51), referToEntry052(52), referToEntry053(53), referToEntry054(54), referToEntry055(55), referToEntry056(56), referToEntry057(57), referToEntry058(58), referToEntry059(59), referToEntry060(60), referToEntry061(61), referToEntry062(62), referToEntry063(63)

AbbrevRowStatus
INTEGER	createAndGo(4), destroy(6)

PartsPer10k
Unsigned32	0..10000

Password
OCTET STRING

HexPassword
OCTET STRING

RadioType
INTEGER	radio802dot11A(1), radio802dot11B(2), radio802dot11G(3), radio802dot11FH(4)

StaticRowEnable
INTEGER	enable(1), disable(2)

MultiPointer255
BITS	null(0), referToEntry001(1), referToEntry002(2), referToEntry003(3), referToEntry004(4), referToEntry005(5), referToEntry006(6), referToEntry007(7), referToEntry008(8), referToEntry009(9), referToEntry010(10), referToEntry011(11), referToEntry012(12), referToEntry013(13), referToEntry014(14), referToEntry015(15), referToEntry016(16), referToEntry017(17), referToEntry018(18), referToEntry019(19), referToEntry020(20), referToEntry021(21), referToEntry022(22), referToEntry023(23), referToEntry024(24), referToEntry025(25), referToEntry026(26), referToEntry027(27), referToEntry028(28), referToEntry029(29), referToEntry030(30), referToEntry031(31), referToEntry032(32), referToEntry033(33), referToEntry034(34), referToEntry035(35), referToEntry036(36), referToEntry037(37), referToEntry038(38), referToEntry039(39), referToEntry040(40), referToEntry041(41), referToEntry042(42), referToEntry043(43), referToEntry044(44), referToEntry045(45), referToEntry046(46), referToEntry047(47), referToEntry048(48), referToEntry049(49), referToEntry050(50), referToEntry051(51), referToEntry052(52), referToEntry053(53), referToEntry054(54), referToEntry055(55), referToEntry056(56), referToEntry057(57), referToEntry058(58), referToEntry059(59), referToEntry060(60), referToEntry061(61), referToEntry062(62), referToEntry063(63), referToEntry064(64), referToEntry065(65), referToEntry066(66), referToEntry067(67), referToEntry068(68), referToEntry069(69), referToEntry070(70), referToEntry071(71), referToEntry072(72), referToEntry073(73), referToEntry074(74), referToEntry075(75), referToEntry076(76), referToEntry077(77), referToEntry078(78), referToEntry079(79), referToEntry080(80), referToEntry081(81), referToEntry082(82), referToEntry083(83), referToEntry084(84), referToEntry085(85), referToEntry086(86), referToEntry087(87), referToEntry088(88), referToEntry089(89), referToEntry090(90), referToEntry091(91), referToEntry092(92), referToEntry093(93), referToEntry094(94), referToEntry095(95), referToEntry096(96), referToEntry097(97), referToEntry098(98), referToEntry099(99), referToEntry100(100), referToEntry101(101), referToEntry102(102), referToEntry103(103), referToEntry104(104), referToEntry105(105), referToEntry106(106), referToEntry107(107), referToEntry108(108), referToEntry109(109), referToEntry110(110), referToEntry111(111), referToEntry112(112), referToEntry113(113), referToEntry114(114), referToEntry115(115), referToEntry116(116), referToEntry117(117), referToEntry118(118), referToEntry119(119), referToEntry120(120), referToEntry121(121), referToEntry122(122), referToEntry123(123), referToEntry124(124), referToEntry125(125), referToEntry126(126), referToEntry127(127), referToEntry128(128), referToEntry129(129), referToEntry130(130), referToEntry131(131), referToEntry132(132), referToEntry133(133), referToEntry134(134), referToEntry135(135), referToEntry136(136), referToEntry137(137), referToEntry138(138), referToEntry139(139), referToEntry140(140), referToEntry141(141), referToEntry142(142), referToEntry143(143), referToEntry144(144), referToEntry145(145), referToEntry146(146), referToEntry147(147), referToEntry148(148), referToEntry149(149), referToEntry150(150), referToEntry151(151), referToEntry152(152), referToEntry153(153), referToEntry154(154), referToEntry155(155), referToEntry156(156), referToEntry157(157), referToEntry158(158), referToEntry159(159), referToEntry160(160), referToEntry161(161), referToEntry162(162), referToEntry163(163), referToEntry164(164), referToEntry165(165), referToEntry166(166), referToEntry167(167), referToEntry168(168), referToEntry169(169), referToEntry170(170), referToEntry171(171), referToEntry172(172), referToEntry173(173), referToEntry174(174), referToEntry175(175), referToEntry176(176), referToEntry177(177), referToEntry178(178), referToEntry179(179), referToEntry180(180), referToEntry181(181), referToEntry182(182), referToEntry183(183), referToEntry184(184), referToEntry185(185), referToEntry186(186), referToEntry187(187), referToEntry188(188), referToEntry189(189), referToEntry190(190), referToEntry191(191), referToEntry192(192), referToEntry193(193), referToEntry194(194), referToEntry195(195), referToEntry196(196), referToEntry197(197), referToEntry198(198), referToEntry199(199), referToEntry200(200), referToEntry201(201), referToEntry202(202), referToEntry203(203), referToEntry204(204), referToEntry205(205), referToEntry206(206), referToEntry207(207), referToEntry208(208), referToEntry209(209), referToEntry210(210), referToEntry211(211), referToEntry212(212), referToEntry213(213), referToEntry214(214), referToEntry215(215), referToEntry216(216), referToEntry217(217), referToEntry218(218), referToEntry219(219), referToEntry220(220), referToEntry221(221), referToEntry222(222), referToEntry223(223), referToEntry224(224), referToEntry225(225), referToEntry226(226), referToEntry227(227), referToEntry228(228), referToEntry229(229), referToEntry230(230), referToEntry231(231), referToEntry232(232), referToEntry233(233), referToEntry234(234), referToEntry235(235), referToEntry236(236), referToEntry237(237), referToEntry238(238), referToEntry239(239), referToEntry240(240), referToEntry241(241), referToEntry242(242), referToEntry243(243), referToEntry244(244), referToEntry245(245), referToEntry246(246), referToEntry247(247), referToEntry248(248), referToEntry249(249), referToEntry250(250), referToEntry251(251), referToEntry252(252), referToEntry253(253), referToEntry254(254), referToEntry255(255)

SinglePointer
INTEGER	0..255

TransmitRate
BITS	null(0), rate1Mb(1), rate2Mb(2), rate5pt5Mb(3), rate6Mb(4), rate9Mb(5), rate11Mb(6), rate12Mb(7), rate18Mb(8), rate22Mb(9), rate24Mb(10), rate36Mb(11), rate48Mb(12), rate54Mb(13)

DoActionShowProgress
INTEGER	doActionRightNow(1), idleState(2)

ScaleBy100
Unsigned32

SnmpOpers
softkill(0), hardkill(1), restart(2), updatecfg(3)
TEXTUAL-CONVENTION
	INTEGER	softkill(0), hardkill(1), restart(2), updatecfg(3)

TruthValue
Represents a boolean value.
TEXTUAL-CONVENTION
	INTEGER	true(1), false(2)

FHAlgorithm
IEEE(0), Hop Delta(1)
TEXTUAL-CONVENTION
	INTEGER	ieee(0), hopdelta(1)

SnmpAdminString
An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC1905]. Note that the size of an SnmpAdminString object is measured in octets, not characters.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..255)

APOnlineStatus
unavailable(0), active(1), inactive(2), alert(3), reset(4)
TEXTUAL-CONVENTION
	INTEGER	unavailable(0), active(1), inactive(2), alert(3), reset(4)

EncrType
The list of availabe encryption types which could be used for BroadCast/MultiCast/Unicast.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), open(1), wep40(2), wep104(4), keyguard(8), tkip(16), aesCcmp(32)

MCValueOffset
srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11)
TEXTUAL-CONVENTION
	INTEGER	srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11)

HsbState
Represents a Standby State.
TEXTUAL-CONVENTION
	INTEGER	startup(1), findStandby(2), waitingForConnectivity(3), connected(4), halted(5), monitoring(6), actingAsPrimary(7), tryingtoReconnect(8), reconnected(9), autoreverting(10)

MUDeviceType
Indicates the device type of the Mobile Unit.
TEXTUAL-CONVENTION
	INTEGER	data(0), voice(1), wirelessAP(2)

APStatus
Indicates the association status of the AccessPort.
TEXTUAL-CONVENTION
	INTEGER	away(0), associated(1)

MUSecurityStatus
The security status for this MU.
TEXTUAL-CONVENTION
	INTEGER	noEncryption(0), wepPerMUKey(1), wepSharedKey(2), tkipPerMUKey(3), tkipSharedKey(4)

CurrentRate
Indicates the current communication rate on the MU.
TEXTUAL-CONVENTION
	INTEGER	rt1Mbps(0), rt2Mbps(1), rt55Mbps(2), rt11Mbps(3)

SupportedRates
Indicates the current supported rates.
TEXTUAL-CONVENTION
	INTEGER	none(0), rt1Mbps(1), rt2Mbps(2), rt1and2Mbps(3), rt55Mbps(4), rt1and55Mbps(5), rt2and55Mbps(6), rt1and2and55Mbps(7), rt11Mbps(8), rt1and11Mbps(9), rt2and11Mbps(10), rt1and2and11Mbps(11), rt55and11Mbps(12), rt1and55and11Mbps(13), rt2and55and11Mbps(14), rt1and2and55and11Mbps(15)

PSPowerMode
Indicates the current power mode setting on this MU.
TEXTUAL-CONVENTION
	INTEGER	cam(0), psp(1)

AuthState
Used to inform whether the MU is authenticated or not.
TEXTUAL-CONVENTION
	INTEGER	notauthenticated(0), authenticated(1)

AuthMethod
The authentication method being used by the MU.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), open(1), preshared(2), eap8021x(4), kerberos(8)

StorageType
Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is permanent(4) can be changed but not deleted. A row which is readOnly(5) cannot be changed nor deleted. If the value of an object with this syntax is either permanent(4) or readOnly(5), it cannot be modified. Conversely, if the value is either other(1), volatile(2) or nonVolatile(3), it cannot be modified to be permanent(4) or readOnly(5). Every usage of this textual convention is required to specify the columnar objects which a permanent(4) row must at a minimum allow to be writable.
TEXTUAL-CONVENTION
	INTEGER	other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5)

RowStatus
The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of [2].) The status column has six defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - `notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except `notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: `notReady', `notInService' or `active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value `active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value `notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value `notReady'). NOTE WELL This textual convention may be used for a MIB table, irrespective of whether the values of that table's conceptual rows are able to be modified while it is active, or whether its conceptual rows must be taken out of service in order to be modified. That is, it is the responsibility of the DESCRIPTION clause of the status column to specify whether the status column must not be `active' in order for the value of some other column of the same conceptual row to be modified. If such a specification is made, affected columns may be changed by an SNMP set PDU if the RowStatus would not be equal to `active' either immediately before or after processing the PDU. In other words, if the PDU also contained a varbind that would change the RowStatus value, the column in question may be changed if the RowStatus was not equal to `active' as the PDU was received, or if the varbind sets the status to a value other than 'active'. Also note that whenever any elements of a row exist, the RowStatus column must also exist. To summarize the effect of having a conceptual row with a status column having a SYNTAX clause value of RowStatus, consider the following state diagram: STATE +--------------+-----------+-------------+------------- | A | B | C | D | |status col.|status column| |status column | is | is |status column ACTION |does not exist| notReady | notInService| is active --------------+--------------+-----------+-------------+------------- set status |noError ->D|inconsist- |inconsistent-|inconsistent- column to | or | entValue| Value| Value createAndGo |inconsistent- | | | | Value| | | --------------+--------------+-----------+-------------+------------- set status |noError see 1|inconsist- |inconsistent-|inconsistent- column to | or | entValue| Value| Value createAndWait |wrongValue | | | --------------+--------------+-----------+-------------+------------- set status |inconsistent- |inconsist- |noError |noError column to | Value| entValue| | active | | | | | | or | | | | | | | |see 2 ->D| ->D| ->D --------------+--------------+-----------+-------------+------------- set status |inconsistent- |inconsist- |noError |noError ->C column to | Value| entValue| | notInService | | | | | | or | | or | | | | | |see 3 ->C| ->C|wrongValue --------------+--------------+-----------+-------------+------------- set status |noError |noError |noError |noError column to | | | | destroy | ->A| ->A| ->A| ->A --------------+--------------+-----------+-------------+------------- set any other |see 4 |noError |noError |see 5 column to some| | | | value | | see 1| ->C| ->D --------------+--------------+-----------+-------------+------------- (1) goto B or C, depending on information available to the agent. (2) if other variable bindings included in the same PDU, provide values for all columns which are missing but required, then return noError and goto D. (3) if other variable bindings included in the same PDU, provide values for all columns which are missing but required, then return noError and goto C. (4) at the discretion of the agent, the return value may be either: inconsistentName: because the agent does not choose to create such an instance when the corresponding RowStatus instance does not exist, or inconsistentValue: if the supplied value is inconsistent with the state of some other MIB object's value, or noError: because the agent chooses to create the instance. If noError is returned, then the instance of the status column must also be created, and the new state is B or C, depending on the information available to the agent. If inconsistentName or inconsistentValue is returned, the row remains in state A. (5) depending on the MIB definition for the column/table, either noError or inconsistentValue may be returned. NOTE: Other processing of the set request may result in a response other than noError being returned, e.g., wrongValue, noCreation, etc. Conceptual Row Creation There are four potential interactions when creating a conceptual row: selecting an instance-identifier which is not in use; creating the conceptual row; initializing any objects for which the agent does not supply a default; and, making the conceptual row available for use by the managed device. Interaction 1: Selecting an Instance-Identifier The algorithm used to select an instance-identifier varies for each conceptual row. In some cases, the instance- identifier is semantically significant, e.g., the destination address of a route, and a management station selects the instance-identifier according to the semantics. In other cases, the instance-identifier is used solely to distinguish conceptual rows, and a management station without specific knowledge of the conceptual row might examine the instances present in order to determine an unused instance-identifier. (This approach may be used, but it is often highly sub-optimal; however, it is also a questionable practice for a naive management station to attempt conceptual row creation.) Alternately, the MIB module which defines the conceptual row might provide one or more objects which provide assistance in determining an unused instance-identifier. For example, if the conceptual row is indexed by an integer-value, then an object having an integer-valued SYNTAX clause might be defined for such a purpose, allowing a management station to issue a management protocol retrieval operation. In order to avoid unnecessary collisions between competing management stations, `adjacent' retrievals of this object should be different. Finally, the management station could select a pseudo-random number to use as the index. In the event that this index was already in use and an inconsistentValue was returned in response to the management protocol set operation, the management station should simply select a new pseudo-random number and retry the operation. A MIB designer should choose between the two latter algorithms based on the size of the table (and therefore the efficiency of each algorithm). For tables in which a large number of entries are expected, it is recommended that a MIB object be defined that returns an acceptable index for creation. For tables with small numbers of entries, it is recommended that the latter pseudo-random index mechanism be used. Interaction 2: Creating the Conceptual Row Once an unused instance-identifier has been selected, the management station determines if it wishes to create and activate the conceptual row in one transaction or in a negotiated set of interactions. Interaction 2a: Creating and Activating the Conceptual Row The management station must first determine the column requirements, i.e., it must determine those columns for which it must or must not provide values. Depending on the complexity of the table and the management station's knowledge of the agent's capabilities, this determination can be made locally by the management station. Alternately, the management station issues a management protocol get operation to examine all columns in the conceptual row that it wishes to create. In response, for each column, there are three possible outcomes: - a value is returned, indicating that some other management station has already created this conceptual row. We return to interaction 1. - the exception `noSuchInstance' is returned, indicating that the agent implements the object-type associated with this column, and that this column in at least one conceptual row would be accessible in the MIB view used by the retrieval were it to exist. For those columns to which the agent provides read-create access, the `noSuchInstance' exception tells the management station that it should supply a value for this column when the conceptual row is to be created. - the exception `noSuchObject' is returned, indicating that the agent does not implement the object-type associated with this column or that there is no conceptual row for which this column would be accessible in the MIB view used by the retrieval. As such, the management station can not issue any management protocol set operations to create an instance of this column. Once the column requirements have been determined, a management protocol set operation is accordingly issued. This operation also sets the new instance of the status column to `createAndGo'. When the agent processes the set operation, it verifies that it has sufficient information to make the conceptual row available for use by the managed device. The information available to the agent is provided by two sources: the management protocol set operation which creates the conceptual row, and, implementation-specific defaults supplied by the agent (note that an agent must provide implementation-specific defaults for at least those objects which it implements as read-only). If there is sufficient information available, then the conceptual row is created, a `noError' response is returned, the status column is set to `active', and no further interactions are necessary (i.e., interactions 3 and 4 are skipped). If there is insufficient information, then the conceptual row is not created, and the set operation fails with an error of `inconsistentValue'. On this error, the management station can issue a management protocol retrieval operation to determine if this was because it failed to specify a value for a required column, or, because the selected instance of the status column already existed. In the latter case, we return to interaction 1. In the former case, the management station can re-issue the set operation with the additional information, or begin interaction 2 again using `createAndWait' in order to negotiate creation of the conceptual row. NOTE WELL Regardless of the method used to determine the column requirements, it is possible that the management station might deem a column necessary when, in fact, the agent will not allow that particular columnar instance to be created or written. In this case, the management protocol set operation will fail with an error such as `noCreation' or `notWritable'. In this case, the management station decides whether it needs to be able to set a value for that particular columnar instance. If not, the management station re-issues the management protocol set operation, but without setting a value for that particular columnar instance; otherwise, the management station aborts the row creation algorithm. Interaction 2b: Negotiating the Creation of the Conceptual Row The management station issues a management protocol set operation which sets the desired instance of the status column to `createAndWait'. If the agent is unwilling to process a request of this sort, the set operation fails with an error of `wrongValue'. (As a consequence, such an agent must be prepared to accept a single management protocol set operation, i.e., interaction 2a above, containing all of the columns indicated by its column requirements.) Otherwise, the conceptual row is created, a `noError' response is returned, and the status column is immediately set to either `notInService' or `notReady', depending on whether it has sufficient information to make the conceptual row available for use by the managed device. If there is sufficient information available, then the status column is set to `notInService'; otherwise, if there is insufficient information, then the status column is set to `notReady'. Regardless, we proceed to interaction 3. Interaction 3: Initializing non-defaulted Objects The management station must now determine the column requirements. It issues a management protocol get operation to examine all columns in the created conceptual row. In the response, for each column, there are three possible outcomes: - a value is returned, indicating that the agent implements the object-type associated with this column and had sufficient information to provide a value. For those columns to which the agent provides read-create access (and for which the agent allows their values to be changed after their creation), a value return tells the management station that it may issue additional management protocol set operations, if it desires, in order to change the value associated with this column. - the exception `noSuchInstance' is returned, indicating that the agent implements the object-type associated with this column, and that this column in at least one conceptual row would be accessible in the MIB view used by the retrieval were it to exist. However, the agent does not have sufficient information to provide a value, and until a value is provided, the conceptual row may not be made available for use by the managed device. For those columns to which the agent provides read-create access, the `noSuchInstance' exception tells the management station that it must issue additional management protocol set operations, in order to provide a value associated with this column. - the exception `noSuchObject' is returned, indicating that the agent does not implement the object-type associated with this column or that there is no conceptual row for which this column would be accessible in the MIB view used by the retrieval. As such, the management station can not issue any management protocol set operations to create an instance of this column. If the value associated with the status column is `notReady', then the management station must first deal with all `noSuchInstance' columns, if any. Having done so, the value of the status column becomes `notInService', and we proceed to interaction 4. Interaction 4: Making the Conceptual Row Available Once the management station is satisfied with the values associated with the columns of the conceptual row, it issues a management protocol set operation to set the status column to `active'. If the agent has sufficient information to make the conceptual row available for use by the managed device, the management protocol set operation succeeds (a `noError' response is returned). Otherwise, the management protocol set operation fails with an error of `inconsistentValue'. NOTE WELL A conceptual row having a status column with value `notInService' or `notReady' is unavailable to the managed device. As such, it is possible for the managed device to create its own instances during the time between the management protocol set operation which sets the status column to `createAndWait' and the management protocol set operation which sets the status column to `active'. In this case, when the management protocol set operation is issued to set the status column to `active', the values held in the agent supersede those used by the managed device. If the management station is prevented from setting the status column to `active' (e.g., due to management station or network failure) the conceptual row will be left in the `notInService' or `notReady' state, consuming resources indefinitely. The agent must detect conceptual rows that have been in either state for an abnormally long period of time and remove them. It is the responsibility of the DESCRIPTION clause of the status column to indicate what an abnormally long period of time would be. This period of time should be long enough to allow for human response time (including `think time') between the creation of the conceptual row and the setting of the status to `active'. In the absense of such information in the DESCRIPTION clause, it is suggested that this period be approximately 5 minutes in length. This removal action applies not only to newly-created rows, but also to previously active rows which are set to, and left in, the notInService state for a prolonged period exceeding that which is considered normal for such a conceptual row. Conceptual Row Suspension When a conceptual row is `active', the management station may issue a management protocol set operation which sets the instance of the status column to `notInService'. If the agent is unwilling to do so, the set operation fails with an error of `wrongValue'. Otherwise, the conceptual row is taken out of service, and a `noError' response is returned. It is the responsibility of the DESCRIPTION clause of the status column to indicate under what circumstances the status column should be taken out of service (e.g., in order for the value of some other column of the same conceptual row to be modified). Conceptual Row Deletion For deletion of conceptual rows, a management protocol set operation is issued which sets the instance of the status column to `destroy'. This request may be made regardless of the current value of the status column (e.g., it is possible to delete conceptual rows which are either `notReady', `notInService' or `active'.) If the operation succeeds, then all instances associated with the conceptual row are immediately removed.
TEXTUAL-CONVENTION
	INTEGER	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)

TargetOptions
com2sec(0), trap2sink(1), trapsink(2), com2secAndtrap2sink(3), all(4)
TEXTUAL-CONVENTION
	INTEGER	0..4

CcPolicyEntry
SEQUENCE
	ccPolicyIndex	INTEGER
	ccPolicyName	DisplayString
	ccPolicyDesc	DisplayString
	ccPolicyCountry	DisplayString
	ccPolicyDefAdoptAPPolicy	DisplayString
	ccPolicyAPPolicyCount	INTEGER
	ccPolicyAPNameOfPolicy	DisplayString
	ccPolicyAddAPPolicy	DisplayString
	ccPolicyRmvAPPolicy	DisplayString
	ccPolicyExcludeInfo	DisplayString
	ccPolicyExcludeEdit	DisplayString
	ccPolicyExcludeRmv	DisplayString
	ccPolicyIncludeInfo	DisplayString
	ccPolicyIncludeEdit	DisplayString
	ccPolicyIncludeRmv	DisplayString
	ccPolicyEtherPolicy	DisplayString
	ccPolicyTrap	TruthValue
	ccPolicyDefChannel	INTEGER
	ccPolicyDefPower	INTEGER
	ccPolicyChannel11a	DisplayString
	ccPolicyPower11a	DisplayString
	ccPolicyChannel11b	DisplayString
	ccPolicyPower11b	DisplayString
	ccPolicyDSCoExistence	TruthValue
	ccPolicyDefAdoptAPPolicy11a	DisplayString
	ccPolicyDefAdoptAPPolicy11b	DisplayString
	ccPolicyDefAdoptAPPolicyFH	DisplayString
	ccPolicyDefAdoptAPPolicy11g	DisplayString
	ccPolicyChannel11g	DisplayString
	ccPolicyPower11g	DisplayString

CcCountryInfoEntry
SEQUENCE
	ccCCIndex	INTEGER
	ccCCode	DisplayString
	ccFullName	DisplayString
	cc11aChannels	DisplayString
	cc11bChannels	DisplayString
	ccFHTableNum	INTEGER
	ccFHChannels	DisplayString
	ccFHAlgorithm	FHAlgorithm
	ccFHContiguous	INTEGER
	ccFHHopSequence	DisplayString
	cc11gChannels	DisplayString

SlaveEntry
SEQUENCE
	hostName	DisplayString
	realM	DisplayString
	ipAddress	IpAddress
	domainName	DisplayString
	slaveIndex	INTEGER

KdcUserEntry
SEQUENCE
	kdcUserIndex	INTEGER
	kdcUserName	DisplayString
	kdcUserTlife	Integer32

KdcWLANEntry
SEQUENCE
	kdcWLANIndex	INTEGER
	kdcWLANName	DisplayString
	kdcWLANTlife	Integer32

RadiusAuthServerEntry
SEQUENCE
	radiusAuthServerIndex	Integer32
	radiusAuthServerAddress	DisplayString
	radiusAuthClientServerPortNumber	Integer32
	radiusAuthClientRoundTripTime	TimeTicks
	radiusAuthClientAccessRequests	Counter32
	radiusAuthClientAccessRetransmissions	INTEGER
	radiusAuthClientAccessAccepts	Counter32
	radiusAuthClientAccessRejects	Counter32
	radiusAuthClientAccessChallenges	Counter32
	radiusAuthClientMalformedAccessResponses	Counter32
	radiusAuthClientBadAuthenticators	Counter32
	radiusAuthClientPendingRequests	Gauge32
	radiusAuthClientTimeouts	INTEGER
	radiusAuthClientUnknownTypes	Counter32
	radiusAuthClientPacketsDropped	Counter32
	radiusAuthClientIdentifier	SnmpAdminString

CcEventEntry
SEQUENCE
	ccEventIndex	INTEGER
	ccEventDescr	DisplayString
	ccEventDefault	TruthValue
	ccEventSyslog	DisplayString
	ccEventSNMPTrap	TruthValue
	ccEventLocalLog	TruthValue

CcSyslogHostsEntry
SEQUENCE
	ccSyslogHostIndex	INTEGER
	ccSyslogHostName	DisplayString
	ccSyslogHostIPAddr	IpAddress
	ccSyslogHostDomain	DisplayString
	ccSyslogHostSetSeverity	DisplayString
	ccSyslogHostSeverityList	DisplayString

CcSystemHostsEntry
SEQUENCE
	ccSystemHostIndex	INTEGER
	ccSystemHostName	DisplayString
	ccSystemHostIPAddr	IpAddress
	ccSystemHostDomain	DisplayString

CcPolicyRCAddRemEntry
SEQUENCE
	ccPolicyRadioType	INTEGER
	ccPolicyRCAdd	DisplayString
	ccPolicyRCRem	DisplayString

CcPolicyRCEntry
SEQUENCE
	ccPolicyRcIndex	INTEGER
	ccPolicyRCChannelDescr	DisplayString

CcPolicyAPPolicyEntry
SEQUENCE
	ccPolicyAPPolicyIndex	INTEGER
	ccPolicyAPPolicyName	DisplayString

CcAPEntry
SEQUENCE
	ccRadioIndex	INTEGER
	ccRadioName	DisplayString
	ccRadioDesc	DisplayString
	ccRadioOnlineStatus	APOnlineStatus
	ccRadioMAC	DisplayString
	ccDeviceMAC	DisplayString
	ccDeviceLocation	DisplayString
	ccRadioType	DisplayString
	ccRadioChannel	DisplayString
	ccRadioPower	DisplayString
	ccRadioPolicy	DisplayString
	ccDeviceNic	INTEGER
	ccDeviceType	DisplayString
	ccRadioCCAmode	INTEGER
	ccRadioCCAthresh	INTEGER
	ccRadioDiversity	INTEGER
	ccDeviceVlanid	INTEGER
	ccDeviceVlanTagsSeen	DisplayString
	ccRadioUptime	DisplayString
	ccRadioTxpps	INTEGER
	ccRadioMUs	INTEGER
	ccRadioGatherStatistics	TruthValue
	ccRadioReset	TruthValue
	ccDeviceClearSeenVlanTags	TruthValue
	ccDeviceReset	TruthValue
	ccRadioAuto	TruthValue
	ccRadioMUPower	DisplayString
	ccRadioProtection	DisplayString
	ccRadioShortSlot	DisplayString
	ccRadioAntenna	DisplayString
	ccRadioCurrentChannel	DisplayString
	ccRadioAllChannels	DisplayString
	ccRadioPowerdBm	DisplayString
	ccRadioCurrentPower	DisplayString
	ccRadioAllPower	DisplayString
	ccRadioMUPowerdBm	DisplayString
	ccRadioAntCorrection	INTEGER
	ccRadioIndoor	DisplayString
	ccRadioDFS	DisplayString
	ccRadioTPC	DisplayString
	ccRadioRadarChannels	DisplayString
	ccDetectorAp	TruthValue
	ccRadioMaxMUs	INTEGER
	ccSimulateRadar	DoActionNow
	ccRadioUser802x	OCTET STRING

CcAPPolicyEntry
SEQUENCE
	ccAPPolicyIndex	INTEGER
	ccAPPolicyName	DisplayString
	ccAPPolicyDesc	DisplayString
	ccAPPolicyPreAmble	DisplayString
	ccAPPolicyBeaconInterval	INTEGER
	ccAPPolicyRTSThreshold	INTEGER
	ccAPPolicyDTIM	INTEGER
	ccAPPolicyBasicRates11a	DisplayString
	ccAPPolicySupportedRates11a	DisplayString
	ccAPPolicyBasicRates11b	DisplayString
	ccAPPolicySupportedRates11b	DisplayString
	ccAPPolicyBasicRatesFH	DisplayString
	ccAPPolicySupportedRatesFH	DisplayString
	ccAPPolicyBasicRates11g	DisplayString
	ccAPPolicySupportedRates11g	DisplayString
	ccAPPolicyNonSpectrumMgmt	DisplayString
	ccAPPolicyAddAllWlan	DisplayString
	ccAPPolicyRemAllWlan	DisplayString
	ccAPPolicyWMEEnable	DisplayString
	ccAPPolicyWMEProfile	DisplayString
	ccAPPolicyDTIM2	INTEGER
	ccAPPolicyDTIM3	INTEGER
	ccAPPolicyDTIM4	INTEGER

CcEPEntry
SEQUENCE
	ccEPIndex	INTEGER
	ccEPNic	INTEGER
	ccEPName	DisplayString
	ccEPDesc	DisplayString
	ccEPMacAddr	DisplayString
	ccEPEnable	DisplayString
	ccEPSpeed	INTEGER
	ccEPEnableDHCP	TruthValue
	ccEPIPAddr	IpAddress
	ccEPNetMask	IpAddress
	ccEPDnsCount	INTEGER
	ccEPDnsList	DisplayString
	ccEPPrimaryVid	INTEGER
	ccEPOnline	TruthValue
	ccEPDisplayName	DisplayString
	ccEPUptime	DisplayString
	ccEPTx	Counter32
	ccEPRx	Counter32
	ccEPDomain	DisplayString
	ccEPGateway	IpAddress
	ccEPCFGMode	DisplayString
	ccEPDuplex	DisplayString
	ccEPMode	DisplayString
	ccEPDhcpPriVlan	TruthValue
	ccEPDDNSStatus	TruthValue
	ccEPDDNSttl	Integer32
	ccEPDDNSUpdateAll	DisplayString
	ccEPDDNSMUserStatus	TruthValue
	ccEPDDNSDomainName	DisplayString

CcEPPEntry
SEQUENCE
	ccEPPIndex	INTEGER
	ccEPPName	DisplayString
	ccEPPAlias	DisplayString
	ccEPPDesc	DisplayString
	ccEPPRonnic	INTEGER
	ccEPPVlanCount	INTEGER
	ccEPPVlanList	DisplayString
	ccEPPCreateNewVlan	DisplayString
	ccEPPRemVlan	DisplayString
	ccEPPDropVlan	TruthValue

Ccdot11FHPhyEntry
SEQUENCE
	ccdot11FHIndex	Integer32
	ccdot11FHHopTime	Integer32
	ccdot11FHCurrentChannelNumber	Integer32
	ccdot11FHMaxDwellTime	Integer32
	ccdot11FHCurrentDwellTime	Integer32
	ccdot11FHCurrentSet	Integer32
	ccdot11FHCurrentPattern	Integer32
	ccdot11FHCurrentIndex	Integer32

CcAPPolicyAddRemWLANEntry
SEQUENCE
	ccAPPolicyDeviceType	INTEGER
	ccAPPolicyAddWLAN	DisplayString
	ccAPPolicyRemWLAN	DisplayString
	ccAPPolicySelectWLAN	DisplayString
	ccAPPolicyUnselectWLAN	DisplayString

CcAPPolicyWLANEntry
SEQUENCE
	ccAPPolicyWLANIndex	INTEGER
	ccAPPolicyWLAN	DisplayString
	ccAPPolicyWLANBW	DisplayString
	ccAPPolicyWLANNP	DisplayString
	ccAPPolicyWLANBSS	DisplayString

CcAPPolicyBSSEntry
SEQUENCE
	ccAPPolicyBSS	DisplayString
	ccAPPolicyPrimaryWLAN	DisplayString

CcFWLANEntry
SEQUENCE
	ccLANIndex	INTEGER
	ccLANName	OCTET STRING
	ccLANDesc	OCTET STRING
	ccLANNATCount	INTEGER
	ccLANAddNAT	OCTET STRING
	ccLANRemNAT	OCTET STRING
	ccLANEp	INTEGER
	ccLANNp	OCTET STRING
	ccLANPfAllow	DisplayString
	ccLANPfDeny	DisplayString

CcFWLANNATEntry
SEQUENCE
	ccLANNATIndex	OCTET STRING
	ccLANNATRemoteRealIP	IpAddress
	ccLANNATLocalNatIP	IpAddress

CcRouteEntry
SEQUENCE
	ccRouteIndex	INTEGER
	ccRouteDest	OCTET STRING
	ccRouteGateway	OCTET STRING
	ccRouteFlags	OCTET STRING
	ccRouteRefs	INTEGER
	ccRouteUse	INTEGER
	ccRouteInterface	OCTET STRING
	ccRouteGenMask	OCTET STRING

CcDhcp1IPRangeEntry
SEQUENCE
	ccDhcp1RangeIndex	INTEGER
	ccDhcp1RangeStartIP	OCTET STRING
	ccDhcp1RangeEndIP	OCTET STRING

CcDhcp1StaticIPEntry
SEQUENCE
	ccDhcp1StaticIPIndex	INTEGER
	ccDhcp1StaticIP	OCTET STRING
	ccDhcp1StaticMac	OCTET STRING
	ccDhcp1StaticHost	OCTET STRING

CcDhcp1OptionEntry
SEQUENCE
	ccDhcp1OptionIndex	INTEGER
	ccDhcp1OptionName	OCTET STRING
	ccDhcp1OptionCode	OCTET STRING
	ccDhcp1OptionType	OCTET STRING
	ccDhcp1OptionValue	OCTET STRING

CcDhcp1LeasesEntry
SEQUENCE
	ccDhcp1LeaseIndex	INTEGER
	ccDhcp1LeaseIP	OCTET STRING
	ccDhcp1LeaseMac	OCTET STRING
	ccDhcp1LeaseStartTime	OCTET STRING
	ccDhcp1LeaseEndTime	OCTET STRING

CcDhcp2IPRangeEntry
SEQUENCE
	ccDhcp2RangeIndex	INTEGER
	ccDhcp2RangeStartIP	OCTET STRING
	ccDhcp2RangeEndIP	OCTET STRING

CcDhcp2StaticIPEntry
SEQUENCE
	ccDhcp2StaticIPIndex	INTEGER
	ccDhcp2StaticIP	OCTET STRING
	ccDhcp2StaticMac	OCTET STRING
	ccDhcp2StaticHost	OCTET STRING

CcDhcp2OptionEntry
SEQUENCE
	ccDhcp2OptionIndex	INTEGER
	ccDhcp2OptionName	OCTET STRING
	ccDhcp2OptionCode	OCTET STRING
	ccDhcp2OptionType	OCTET STRING
	ccDhcp2OptionValue	OCTET STRING

CcDhcp2LeasesEntry
SEQUENCE
	ccDhcp2LeaseIndex	INTEGER
	ccDhcp2LeaseIP	OCTET STRING
	ccDhcp2LeaseMac	OCTET STRING
	ccDhcp2LeaseStartTime	OCTET STRING
	ccDhcp2LeaseEndTime	OCTET STRING

CcUserEntry
SEQUENCE
	ccUserID	DisplayString
	ccUserFullName	DisplayString
	ccUserPwd	DisplayString
	ccUserAdminRight	TruthValue
	ccUserProfileMgmtRight	TruthValue
	ccUserSysAdminRight	TruthValue
	ccUserSNMPAdminRight	TruthValue
	ccUserSecurityAdminRight	TruthValue
	ccUserIndex	INTEGER

CcWLANEntry
SEQUENCE
	ccWLANIndex	INTEGER
	ccWLANName	DisplayString
	ccESSID	DisplayString
	ccSecurity	DisplayString
	ccACLEnabled	TruthValue
	ccMaxMus	INTEGER
	ccKerberosAuthName	DisplayString
	ccKerberosAuthPass	DisplayString
	ccWLANACL	DisplayString
	ccWLANIsAuthenticated	TruthValue
	ccWLANMUTraffic	INTEGER
	ccWLANSecuredBeacon	TruthValue
	ccWLANCurrentMU	INTEGER
	ccWLANNetMask	IpAddress
	ccWLANDefaultRoute	IpAddress
	ccWLANBCMC11A	EncrType
	ccWLANBCMC11B	EncrType
	ccWLANBCMCFH	EncrType
	ccBroadcastEss	TruthValue
	ccWLANDesc	DisplayString
	ccWlanWMEEnable	DisplayString
	ccWlanWMEProfile	DisplayString

CcKnownCCEntry
SEQUENCE
	ccKnownCCIndex	INTEGER
	ccKnownCCName	DisplayString
	ccKnownCCMac	DisplayString

CcKnownAPEntry
SEQUENCE
	ccKnownAPIndex	INTEGER
	ccKnownAPMac	DisplayString
	ccKnownAPVer	INTEGER
	ccKnownAPIP	IpAddress
	ccKnownAPPriority	INTEGER
	ccKnownAPMus	INTEGER
	ccKnownAPType	INTEGER
	ccKnownAPAPVer	INTEGER
	ccKnownAPEssid	DisplayString

CcGraphEntry
SEQUENCE
	ccGraphIndex	INTEGER
	ccGraphName	DisplayString
	ccGraphWlanId	DisplayString

CcVLANEntry
SEQUENCE
	ccVLANIndex	INTEGER
	ccVLANName	DisplayString
	ccVLANDesc	DisplayString
	ccVLANVid	INTEGER
	ccVLANPriority	INTEGER
	ccVLANPorts	INTEGER
	ccVLANEtherPolicy	DisplayString
	ccVLANWlan	INTEGER
	ccVLANWlanList	DisplayString
	ccVLANAddWlan	DisplayString
	ccVLANRemWlan	DisplayString

CcSecurityEntry
SEQUENCE
	ccSecIndex	INTEGER
	ccSecName	DisplayString
	ccSecDesc	DisplayString
	ccSecBeaconEssid	TruthValue
	ccSecPreSharedAuthEnabled	TruthValue
	ccSecWEPEnabled	TruthValue
	ccSecWEPKeyBitSize	INTEGER
	ccSecWEPKey	DisplayString
	ccSecWEPKeyUse	INTEGER
	ccSecKerberosEnabled	TruthValue
	ccSecKerberosRealm	DisplayString
	ccSecKerberosServer1	DisplayString
	ccSecKerberosServer2	DisplayString
	ccSecKerberosServer3	DisplayString
	ccSecKerberosPort1	INTEGER
	ccSecKerberosPort2	INTEGER
	ccSecKerberosPort3	INTEGER
	ccSecRadiusServer1	DisplayString
	ccSecRadiusPort1	INTEGER
	ccSecRadiusSecret1	DisplayString
	ccSecRadiusServer2	DisplayString
	ccSecRadiusPort2	INTEGER
	ccSecRadiusSecret2	DisplayString
	ccSecRadiusHostname	DisplayString
	ccSecEapEnabled	TruthValue
	ccSecEapQuietPeriod	INTEGER
	ccSecEapTxPeriod	INTEGER
	ccSecEapReauth	TruthValue
	ccSecEapReauthPeriod	INTEGER
	ccSecEapReauthMaxRetries	INTEGER
	ccSecEapSupplTimeout	INTEGER
	ccSecEapMaxreqRetries	INTEGER
	ccSecGroupRekeyPeriod	INTEGER
	ccSecPreSharedKeyMaterial	DisplayString
	ccSecOpenEncryptEnabled	TruthValue
	ccSecKeyGuardEnabled	TruthValue
	ccSecTKIPEnabled	TruthValue
	ccSecBCMCEncrType	EncrType
	ccSecCheckValidity	DisplayString
	ccSecCCMPEnabled	TruthValue
	ccSecPreAuthentication	TruthValue
	ccSecPMKCaching	TruthValue
	ccSecVPNEnabled	TruthValue

CcACLEntry
SEQUENCE
	ccACLIndex	INTEGER
	ccACLName	DisplayString
	ccACLDefaultAction	DisplayString
	ccACLAction	DisplayString
	ccACLGetItemCount	INTEGER
	ccACLGetItem	DisplayString
	ccACLAddItem	DisplayString
	ccACLRemItem	DisplayString

CcNPEntry
SEQUENCE
	ccNPIndex	INTEGER
	ccNPName	DisplayString
	ccNPDesc	DisplayString
	ccNPInName	DisplayString
	ccNPOutName	DisplayString

CcPOEntry
SEQUENCE
	ccPOIndex	INTEGER
	ccPOName	DisplayString
	ccPODesc	DisplayString
	ccPOCgCount	INTEGER
	ccPOAddCg	DisplayString
	ccPORemCg	DisplayString
	ccPOType	INTEGER
	ccPOPacketModifier	DisplayString

CcCGEntry
SEQUENCE
	ccCGIndex	INTEGER
	ccCGName	DisplayString
	ccCGDesc	DisplayString
	ccCGCfCount	INTEGER
	ccCGAddCf	DisplayString
	ccCGRemCf	DisplayString

CcCFEntry
SEQUENCE
	ccCFIndex	INTEGER
	ccCFName	DisplayString
	ccCFDesc	DisplayString
	ccCFMcCount	INTEGER
	ccCFAddMc	MCValueOffset
	ccCFRemMc	MCValueOffset

CcPOCGEntry
SEQUENCE
	ccPOCGIndex	INTEGER
	ccPOCGName	DisplayString
	ccPOCGNewIP	DisplayString
	ccPOCGVlanPriority	DisplayString
	ccPOCGTos	DisplayString
	ccPOCGBw	INTEGER
	ccPOCGTxProfile	INTEGER
	ccPOCGPacketModifier	DisplayString

CcCGCFEntry
SEQUENCE
	ccCGCFIndex	INTEGER
	ccCGCFAction	DisplayString
	ccCGCFName	DisplayString

CcCFMcEntry
SEQUENCE
	ccCFMCIndex	INTEGER
	ccCFMCOffset	MCValueOffset
	ccCFMCValueCount	INTEGER
	ccCFAddMCValue	DisplayString
	ccCFRemMCValue	DisplayString

CcCFMcValEntry
SEQUENCE
	ccCFMcValIndex	INTEGER
	ccCFMCValue	DisplayString

CcMUInfoEntry
SEQUENCE
	ccMUInfoIndex	Integer32
	ccMUInfoType	MUDeviceType
	ccMUInfoMac	DisplayString
	ccMUInfoIP	DisplayString
	ccMUInfoWlan	DisplayString
	ccMUInfoEssid	DisplayString
	ccMUInfoAP	DisplayString
	ccMUInfoAPState	APStatus
	ccMUInfoSecState	MUSecurityStatus
	ccMUInfoCurRate	CurrentRate
	ccMUInfoSupRates	DisplayString
	ccMUInfoRssi	DisplayString
	ccMUInfoPsp	PSPowerMode
	ccMUInfoIntf	DisplayString
	ccMUInfoAsscUptime	DisplayString
	ccMUInfoTktExp	DisplayString
	ccMUInfoUserName	DisplayString
	ccMUInfoPktTx	DisplayString
	ccMUInfoPktRx	DisplayString
	ccMUInfoBytesTx	DisplayString
	ccMUInfoBytesRx	DisplayString
	ccMUInfoLastAct	DisplayString
	ccMUInfoVlan	DisplayString
	ccMUInfoAuthState	AuthState
	ccMUInfoAuthMethod	AuthMethod
	ccMUInfoEncrMethod	EncrType
	ccMUInfoBCMCEncrType	EncrType
	ccMUInfoRoamCount	Integer32

CcACLItemsEntry
SEQUENCE
	ccACLItemIndex	INTEGER
	ccACLItem	DisplayString

WvpnIpPoolsEntry
SEQUENCE
	wvpnIpPoolIndex	Integer32
	clientIpPoolName	DisplayString
	clientNetMask	IpAddress
	clientDhcpServerAddress	IpAddress
	clientDefaultGatewayAddress	IpAddress
	clientDnsAddress	IpAddress
	clientWinsAddress	IpAddress
	clientDomainName	DisplayString
	clientNetBiosNodeType	DisplayString
	clientDhcpLeaseTime	DisplayString
	reuseAddrTime	Integer32
	ipRangeCount	Integer32
	clientIpRanges	DisplayString

WvpnServerCertificateEntry
SEQUENCE
	wvpnCertIndex	Integer32
	userName	DisplayString
	serialNumber	DisplayString
	subject	DisplayString
	version	INTEGER
	issuer	DisplayString
	keyLength	INTEGER
	validFrom	DisplayString
	validTo	DisplayString
	certificate	DisplayString
	binary	DisplayString
	fingerPrint	DisplayString
	authFingerPrint	DisplayString

WvpnCaCertificateEntry
SEQUENCE
	wvpnCaCertIndex	INTEGER
	wvpnCaSerialNumber	DisplayString
	wvpnCaSubject	DisplayString
	wvpnCaVersion	INTEGER
	wvpnCaIssuer	DisplayString
	wvpnCaKeyLength	DisplayString
	wvpnCaValidFrom	DisplayString
	wvpnCaValidTo	DisplayString
	wvpnCaBinary	DisplayString
	wvpnCaFingerPrint	DisplayString
	wvpnCaAuthFingerPrint	DisplayString

WvpnDDNSAddressEntry
SEQUENCE
	wvpnDDNSAddressIndex	INTEGER
	wvpnDDNSipAddress	IpAddress

WvpnSessionEntry
SEQUENCE
	wvpnSessionIndex	Integer32
	wvpnSessionId	DisplayString
	wvpnVpnIp	DisplayString
	wvpnRealIp	DisplayString
	wvpnLoginTime	DisplayString
	wvpnRoamTime	DisplayString
	wvpnLastActive	DisplayString
	wvpnPoolName	DisplayString
	wvpnMacAddr	DisplayString

CcTargetAddrEntry
SEQUENCE
	ccTargetAddrName	Integer32
	ccTargetAddrSecName	DisplayString
	ccTargetAddrHost	DisplayString
	ccTargetAddrCommunity	DisplayString
	ccTargetAddrPort	Integer32
	ccTargetAddrStorageType	StorageType
	ccTargetAddrRowStatus	RowStatus
	ccTargetAddrOption	TargetOptions

CcHwSensorsEntry
SEQUENCE
	ccHwSensorsIndex	INTEGER
	ccHwSensorsType	INTEGER
	ccHwSensorsDescr	DisplayString
	ccHwSensorsCurrentReading	Integer32
	ccHwSensorsMinimum	Gauge32
	ccHwSensorsMaximum	Gauge32
	ccHwSensorsNotifyIfAbove	Integer32

CcRadiusClientAuthEntry
SEQUENCE
	ccRadiusClientAuthIndex	DisplayString
	ccRadiusClientAuthIpAddr	DisplayString
	ccRadiusClientAuthMask	DisplayString
	ccRadiusClientAuthSharedSecret	DisplayString
	ccRadiusClientAuthRowStatus	AbbrevRowStatus

CcRadiusProxyServerEntry
SEQUENCE
	ccRadiusProxyServerIndex	DisplayString
	ccRadiusProxyServerPrefixOrSuffix	DisplayString
	ccRadiusProxyServerIp	IpAddress
	ccRadiusProxyServerPort	Integer32
	ccRadiusProxyServerSharedSecret	DisplayString
	ccRadiusProxyServerRowStatus	AbbrevRowStatus

CcRadiusGroupsEntry
SEQUENCE
	ccRadiusGroup	DisplayString
	ccRadiusGroupRowStatus	AbbrevRowStatus

CcRadiusUsersEntry
SEQUENCE
	ccRadiusUsersId	DisplayString
	ccRadiusUsersPassword	Password
	ccRadiusUsersGroups	BITS
	ccRadiusUsersRowStatus	AbbrevRowStatus

CcRadiusAccessEntry
SEQUENCE
	ccRadiusAccessGroupId	DisplayString
	ccRadiusAccessWlanPtrs	BITS

CcRadiusTimeRestrictionEntry
SEQUENCE
	ccRadiusTimeRestrictionStart	DisplayString
	ccRadiusTimeRestrictionEnd	DisplayString
	ccRadiusTimeRestrictionDays	DisplayString

CcRapAuthEntry
SEQUENCE
	ccRapAuthIndex	Unsigned32
	ccRapAuthMacFilter	DisplayString
	ccRapAuthEssidFilter	DisplayString
	ccRapAuthRowExists	TruthValue

CcRapResultsApprovedEntry
SEQUENCE
	ccRapResultsApprovedIndex	Unsigned32
	ccRapResultsApprovedApMac	DisplayString
	ccRapResultsApprovedEssid	DisplayString
	ccRapResultsApprovedCopyToAuthTable	DoActionNow
	ccRapResultsApprovedFirstHeard	DisplayString
	ccRapResultsApprovedLastHeard	DisplayString
	ccRapResultsApprovedPortalPtr	MultiPointer255
	ccRapResultsApprovedHowFound	DisplayString
	ccRapResultsApprovedHowAuth	DisplayString
	ccRapResultsApprovedRowErase	DoActionNow

CcRapResultsRogueEntry
SEQUENCE
	ccRapResultsRogueIndex	Unsigned32
	ccRapResultsRogueApMac	DisplayString
	ccRapResultsRogueEssid	DisplayString
	ccRapResultsRogueCopyToAuthTable	DoActionNow
	ccRapResultsRogueFirstHeard	DisplayString
	ccRapResultsRogueLastHeard	DisplayString
	ccRapResultsRoguePortalPtr	MultiPointer255
	ccRapResultsRogueHowFound	DisplayString
	ccRapResultsRogueClosestPortalPtr	DisplayString
	ccRapResultsRogueClosestPortalRssi	Integer32

CcApEntry
SEQUENCE
	ccApIndex	Integer32
	ccApNicMac	DisplayString
	ccApModelNumber	DisplayString
	ccApSerialNumber	DisplayString
	ccApPcbRevision	DisplayString
	ccApBootLoaderRev	DisplayString
	ccApWispVersion	DisplayString
	ccApRuntimeFwVersion	DisplayString
	ccApNumPortals	Unsigned32
	ccApPointersToPortals	MultiPointer255

CcPortalEntry
SEQUENCE
	ccPortalIndex	INTEGER
	ccPortalPointerToAp	SinglePointer
	ccPortalPointersToWlans	MultiPointer63
	ccPortalName	DisplayString
	ccPortalLocation	DisplayString
	ccPortalOptions	BITS
	ccPortalMac	DisplayString
	ccPortalNumberofEss	Integer32
	ccPortalNumberOfBss	Integer32
	ccPortalAssociatedMus	Integer32
	ccPortalRadioType	RadioType
	ccPortalChannel	INTEGER
	ccPortalTxPowerLevel	Integer32
	ccPortalLastAdoption	TimeTicks
	ccPortalState	INTEGER
	ccPortalBackgroundNoiseNumSamples	Counter32
	ccPortalBackgroundNoiseBest	Integer32
	ccPortalBackgroundNoiseWorst	Integer32
	ccPortalBackgroundNoiseSum	Integer32
	ccPortalBackgroundNoiseSumSquares	Counter64

CcPortalSystemStatsEntry
SEQUENCE
	ccPortalSystemStatsBeaconTx	Integer32
	ccPortalSystemStatsBeaconsTxOctets	Unsigned32
	ccPortalSystemStatsProbeReqRx	Unsigned32
	ccPortalSystemStatsProbeReqRxOctets	Unsigned32
	ccPortalSystemStatsProbeRespRetriesNone	Unsigned32
	ccPortalSystemStatsProbeRespRetries1	Unsigned32
	ccPortalSystemStatsProbeRespRetries2	Unsigned32
	ccPortalSystemStatsProbeRespRetries3OrMore	Unsigned32
	ccPortalSystemStatsProbeRespRetriesFailed	Unsigned32
	ccPortalSystemStatsProbeRespTxOctets	Unsigned32

CcPortalStatsEntry
SEQUENCE
	ccPortalTxPktsUcast	Counter32
	ccPortalRxPktsUcast	Counter32
	ccPortalRxPktsNUcast	Counter32
	ccPortalTxOctetsUcast	Counter32
	ccPortalRxOctetsUcast	Counter32
	ccPortalRxOctetsNUcast	Counter32
	ccPortalRxUndecryptablePkts	Counter32
	ccPortalLastActivity	TimeTicks

CcPortalRxPktsEntry
SEQUENCE
	ccPortalRxPktsAt1Mb	Counter32
	ccPortalRxPktsAt2Mb	Counter32
	ccPortalRxPktsAt5pt5Mb	Counter32
	ccPortalRxPktsAt6Mb	Counter32
	ccPortalRxPktsAt9Mb	Counter32
	ccPortalRxPktsAt11Mb	Counter32
	ccPortalRxPktsAt12Mb	Counter32
	ccPortalRxPktsAt18Mb	Counter32
	ccPortalRxPktsAt22Mb	Counter32
	ccPortalRxPktsAt24Mb	Counter32
	ccPortalRxPktsAt36Mb	Counter32
	ccPortalRxPktsAt48Mb	Counter32
	ccPortalRxPktsAt54Mb	Counter32

CcPortalTxPktsEntry
SEQUENCE
	ccPortalTxPktsAt1Mb	Counter32
	ccPortalTxPktsAt2Mb	Counter32
	ccPortalTxPktsAt5pt5Mb	Counter32
	ccPortalTxPktsAt6Mb	Counter32
	ccPortalTxPktsAt9Mb	Counter32
	ccPortalTxPktsAt11Mb	Counter32
	ccPortalTxPktsAt12Mb	Counter32
	ccPortalTxPktsAt18Mb	Counter32
	ccPortalTxPktsAt22Mb	Counter32
	ccPortalTxPktsAt24Mb	Counter32
	ccPortalTxPktsAt36Mb	Counter32
	ccPortalTxPktsAt48Mb	Counter32
	ccPortalTxPktsAt54Mb	Counter32

CcPortalRxOctetsEntry
SEQUENCE
	ccPortalRxOctetsAt1Mb	Counter32
	ccPortalRxOctetsAt2Mb	Counter32
	ccPortalRxOctetsAt5pt5Mb	Counter32
	ccPortalRxOctetsAt6Mb	Counter32
	ccPortalRxOctetsAt9Mb	Counter32
	ccPortalRxOctetsAt11Mb	Counter32
	ccPortalRxOctetsAt12Mb	Counter32
	ccPortalRxOctetsAt18Mb	Counter32
	ccPortalRxOctetsAt22Mb	Counter32
	ccPortalRxOctetsAt24Mb	Counter32
	ccPortalRxOctetsAt36Mb	Counter32
	ccPortalRxOctetsAt48Mb	Counter32
	ccPortalRxOctetsAt54Mb	Counter32

CcPortalTxOctetsEntry
SEQUENCE
	ccPortalTxOctetsAt1Mb	Counter32
	ccPortalTxOctetsAt2Mb	Counter32
	ccPortalTxOctetsAt5pt5Mb	Counter32
	ccPortalTxOctetsAt6Mb	Counter32
	ccPortalTxOctetsAt9Mb	Counter32
	ccPortalTxOctetsAt11Mb	Counter32
	ccPortalTxOctetsAt12Mb	Counter32
	ccPortalTxOctetsAt18Mb	Counter32
	ccPortalTxOctetsAt22Mb	Counter32
	ccPortalTxOctetsAt24Mb	Counter32
	ccPortalTxOctetsAt36Mb	Counter32
	ccPortalTxOctetsAt48Mb	Counter32
	ccPortalTxOctetsAt54Mb	Counter32

CcPortalTxRetriesPktsEntry
SEQUENCE
	ccPortalTxRetriesPktsNone	Counter32
	ccPortalTxRetriesPkts01	Counter32
	ccPortalTxRetriesPkts02	Counter32
	ccPortalTxRetriesPkts03	Counter32
	ccPortalTxRetriesPkts04	Counter32
	ccPortalTxRetriesPkts05	Counter32
	ccPortalTxRetriesPkts06	Counter32
	ccPortalTxRetriesPkts07	Counter32
	ccPortalTxRetriesPkts08	Counter32
	ccPortalTxRetriesPkts09	Counter32
	ccPortalTxRetriesPkts10	Counter32
	ccPortalTxRetriesPkts11	Counter32
	ccPortalTxRetriesPkts12	Counter32
	ccPortalTxRetriesPkts13	Counter32
	ccPortalTxRetriesPkts14	Counter32
	ccPortalTxRetriesPkts15	Counter32
	ccPortalTxRetriesPktsFailed	Counter32

CcPortalTxRetriesOctetsEntry
SEQUENCE
	ccPortalTxRetriesOctetsNone	Counter32
	ccPortalTxRetriesOctets01	Counter32
	ccPortalTxRetriesOctets02	Counter32
	ccPortalTxRetriesOctets03	Counter32
	ccPortalTxRetriesOctets04	Counter32
	ccPortalTxRetriesOctets05	Counter32
	ccPortalTxRetriesOctets06	Counter32
	ccPortalTxRetriesOctets07	Counter32
	ccPortalTxRetriesOctets08	Counter32
	ccPortalTxRetriesOctets09	Counter32
	ccPortalTxRetriesOctets10	Counter32
	ccPortalTxRetriesOctets11	Counter32
	ccPortalTxRetriesOctets12	Counter32
	ccPortalTxRetriesOctets13	Counter32
	ccPortalTxRetriesOctets14	Counter32
	ccPortalTxRetriesOctets15	Counter32
	ccPortalTxRetriesOctetsFailed	Counter32

CcPortalSigStatsEntry
SEQUENCE
	ccPortalSigStatsNumPkts	Counter32
	ccPortalSigStatsSignalBest	Integer32
	ccPortalSigStatsSignalWorst	Integer32
	ccPortalSigStatsSignalSum	Integer32
	ccPortalSigStatsSignalSumSquares	Counter64
	ccPortalSigStatsSignalMostRecent	Integer32
	ccPortalSigStatsNoiseBest	Integer32
	ccPortalSigStatsNoiseWorst	Integer32
	ccPortalSigStatsNoiseSum	Integer32
	ccPortalSigStatsNoiseSumSquares	Counter64
	ccPortalSigStatsNoiseMostRecent	Integer32
	ccPortalSigStatsSnrBest	Integer32
	ccPortalSigStatsSnrWorst	Integer32
	ccPortalSigStatsSnrSum	Counter64
	ccPortalSigStatsSnrSumSquares	Counter64
	ccPortalSigStatsSnrMostRecent	Integer32

CcPortalSumStatsShortEntry
SEQUENCE
	ccPortalSumStatsShortTimestamp	TimeTicks
	ccPortalSumStatsShortNumPkts	Unsigned32
	ccPortalSumStatsShortPktsPerSec100	ScaleBy100
	ccPortalSumStatsShortPktsPerSecTx100	ScaleBy100
	ccPortalSumStatsShortPktsPerSecRx100	ScaleBy100
	ccPortalSumStatsShortThroughput	Unsigned32
	ccPortalSumStatsShortThroughputTx	Unsigned32
	ccPortalSumStatsShortThroughputRx	Unsigned32
	ccPortalSumStatsShortAvgBitSpeed	Unsigned32
	ccPortalSumStatsShortAvgMuSignal	Integer32
	ccPortalSumStatsShortAvgMuNoise	Integer32
	ccPortalSumStatsShortAvgMuSnr	Integer32
	ccPortalSumStatsShortPp10kNUcastPkts	PartsPer10k
	ccPortalSumStatsShortPp10kTxWithRetries	PartsPer10k
	ccPortalSumStatsShortPp10kTxMaxRetries	PartsPer10k
	ccPortalSumStatsShortTxAvgRetries100	ScaleBy100
	ccPortalSumStatsShortPp10kRxUndecrypt	PartsPer10k
	ccPortalSumStatsShortTotalMus	Unsigned32
	ccPortalSumStatsShortPp10kRfUtil	PartsPer10k
	ccPortalSumStatsShortPp10kDropped	PartsPer10k

CcPortalSumStatsLongEntry
SEQUENCE
	ccPortalSumStatsLongTimestamp	TimeTicks
	ccPortalSumStatsLongNumPkts	Unsigned32
	ccPortalSumStatsLongPktsPerSec100	ScaleBy100
	ccPortalSumStatsLongPktsPerSecTx100	ScaleBy100
	ccPortalSumStatsLongPktsPerSecRx100	ScaleBy100
	ccPortalSumStatsLongThroughput	Unsigned32
	ccPortalSumStatsLongThroughputTx	Unsigned32
	ccPortalSumStatsLongThroughputRx	Unsigned32
	ccPortalSumStatsLongAvgBitSpeed	Unsigned32
	ccPortalSumStatsLongAvgMuSignal	Integer32
	ccPortalSumStatsLongAvgMuNoise	Integer32
	ccPortalSumStatsLongAvgMuSnr	Integer32
	ccPortalSumStatsLongPp10kNUcastPkts	PartsPer10k
	ccPortalSumStatsLongPp10kTxWithRetries	PartsPer10k
	ccPortalSumStatsLongPp10kTxMaxRetries	PartsPer10k
	ccPortalSumStatsLongTxAvgRetries100	ScaleBy100
	ccPortalSumStatsLongPp10kRxUndecrypt	PartsPer10k
	ccPortalSumStatsLongTotalMus	Unsigned32
	ccPortalSumStatsLongPp10kRfUtil	PartsPer10k
	ccPortalSumStatsLongPp10kDropped	PartsPer10k

CcMuInfoEntry
SEQUENCE
	ccMuMac	DisplayString
	ccMuWlanIndex	Integer32
	ccMuWlanName	DisplayString
	ccMuIsDataReady	TruthValue
	ccMuPortalIndex	Integer32
	ccMuPortalMac	DisplayString
	ccMuSymbolRogueApEna	TruthValue
	ccMuIpAddr	IpAddress
	ccMuType	INTEGER
	ccMuRadioType	RadioType
	ccMuSupportedRates	BITS
	ccMuPowerMode	INTEGER
	ccMuAuthenticationMethod	INTEGER
	ccMuEncryptionMethod	INTEGER
	ccMuVlanId	Unsigned32

CcMuStatsEntry
SEQUENCE
	ccMuTxPktsUcast	Counter32
	ccMuRxPktsUcast	Counter32
	ccMuRxPktsNUcast	Counter32
	ccMuTxOctetsUcast	Counter32
	ccMuRxOctetsUcast	Counter32
	ccMuRxOctetsNUcast	Counter32
	ccMuRxUndecryptablePkts	Counter32
	ccMuRxRssiNumPkts	Counter32
	ccMuRxRssiSum	Integer32
	ccMuRxRssiSumSquares	Counter64
	ccMuRxRssiMostRecent	INTEGER
	ccMuLastActivity	TimeTicks

CcMuRxPktsEntry
SEQUENCE
	ccMuRxPktsAt1Mb	Counter32
	ccMuRxPktsAt2Mb	Counter32
	ccMuRxPktsAt5pt5Mb	Counter32
	ccMuRxPktsAt6Mb	Counter32
	ccMuRxPktsAt9Mb	Counter32
	ccMuRxPktsAt11Mb	Counter32
	ccMuRxPktsAt12Mb	Counter32
	ccMuRxPktsAt18Mb	Counter32
	ccMuRxPktsAt22Mb	Counter32
	ccMuRxPktsAt24Mb	Counter32
	ccMuRxPktsAt36Mb	Counter32
	ccMuRxPktsAt48Mb	Counter32
	ccMuRxPktsAt54Mb	Counter32

CcMuTxPktsEntry
SEQUENCE
	ccMuTxPktsAt1Mb	Counter32
	ccMuTxPktsAt2Mb	Counter32
	ccMuTxPktsAt5pt5Mb	Counter32
	ccMuTxPktsAt6Mb	Counter32
	ccMuTxPktsAt9Mb	Counter32
	ccMuTxPktsAt11Mb	Counter32
	ccMuTxPktsAt12Mb	Counter32
	ccMuTxPktsAt18Mb	Counter32
	ccMuTxPktsAt22Mb	Counter32
	ccMuTxPktsAt24Mb	Counter32
	ccMuTxPktsAt36Mb	Counter32
	ccMuTxPktsAt48Mb	Counter32
	ccMuTxPktsAt54Mb	Counter32

CcMuRxOctetsEntry
SEQUENCE
	ccMuRxOctetsAt1Mb	Counter32
	ccMuRxOctetsAt2Mb	Counter32
	ccMuRxOctetsAt5pt5Mb	Counter32
	ccMuRxOctetsAt6Mb	Counter32
	ccMuRxOctetsAt9Mb	Counter32
	ccMuRxOctetsAt11Mb	Counter32
	ccMuRxOctetsAt12Mb	Counter32
	ccMuRxOctetsAt18Mb	Counter32
	ccMuRxOctetsAt22Mb	Counter32
	ccMuRxOctetsAt24Mb	Counter32
	ccMuRxOctetsAt36Mb	Counter32
	ccMuRxOctetsAt48Mb	Counter32
	ccMuRxOctetsAt54Mb	Counter32

CcMuTxOctetsEntry
SEQUENCE
	ccMuTxOctetsAt1Mb	Counter32
	ccMuTxOctetsAt2Mb	Counter32
	ccMuTxOctetsAt5pt5Mb	Counter32
	ccMuTxOctetsAt6Mb	Counter32
	ccMuTxOctetsAt9Mb	Counter32
	ccMuTxOctetsAt11Mb	Counter32
	ccMuTxOctetsAt12Mb	Counter32
	ccMuTxOctetsAt18Mb	Counter32
	ccMuTxOctetsAt22Mb	Counter32
	ccMuTxOctetsAt24Mb	Counter32
	ccMuTxOctetsAt36Mb	Counter32
	ccMuTxOctetsAt48Mb	Counter32
	ccMuTxOctetsAt54Mb	Counter32

CcMuTxRetriesEntry
SEQUENCE
	ccMuTxRetriesNone	Counter32
	ccMuTxRetries01	Counter32
	ccMuTxRetries02	Counter32
	ccMuTxRetries03	Counter32
	ccMuTxRetries04	Counter32
	ccMuTxRetries05	Counter32
	ccMuTxRetries06	Counter32
	ccMuTxRetries07	Counter32
	ccMuTxRetries08	Counter32
	ccMuTxRetries09	Counter32
	ccMuTxRetries10	Counter32
	ccMuTxRetries11	Counter32
	ccMuTxRetries12	Counter32
	ccMuTxRetries13	Counter32
	ccMuTxRetries14	Counter32
	ccMuTxRetries15	Counter32
	ccMuTxRetriesFailed	Counter32
	ccMuTxRetriesTotal	Counter32
	ccMuTxRetriesMostRecent	INTEGER

CcMuTxRetriesOctetsEntry
SEQUENCE
	ccMuTxRetriesOctetsNone	Counter32
	ccMuTxRetriesOctets01	Counter32
	ccMuTxRetriesOctets02	Counter32
	ccMuTxRetriesOctets03	Counter32
	ccMuTxRetriesOctets04	Counter32
	ccMuTxRetriesOctets05	Counter32
	ccMuTxRetriesOctets06	Counter32
	ccMuTxRetriesOctets07	Counter32
	ccMuTxRetriesOctets08	Counter32
	ccMuTxRetriesOctets09	Counter32
	ccMuTxRetriesOctets10	Counter32
	ccMuTxRetriesOctets11	Counter32
	ccMuTxRetriesOctets12	Counter32
	ccMuTxRetriesOctets13	Counter32
	ccMuTxRetriesOctets14	Counter32
	ccMuTxRetriesOctets15	Counter32
	ccMuTxRetriesOctetsFailed	Counter32

CcMuSigStatsEntry
SEQUENCE
	ccMuSigStatsNumPkts	Counter32
	ccMuSigStatsSignalBest	Integer32
	ccMuSigStatsSignalWorst	Integer32
	ccMuSigStatsSignalSum	Integer32
	ccMuSigStatsSignalSumSquares	Counter64
	ccMuSigStatsSignalMostRecent	Integer32
	ccMuSigStatsNoiseBest	Integer32
	ccMuSigStatsNoiseWorst	Integer32
	ccMuSigStatsNoiseSum	Integer32
	ccMuSigStatsNoiseSumSquares	Counter64
	ccMuSigStatsNoiseMostRecent	Integer32
	ccMuSigStatsSnrBest	Integer32
	ccMuSigStatsSnrWorst	Integer32
	ccMuSigStatsSnrSum	Counter64
	ccMuSigStatsSnrSumSquares	Counter64
	ccMuSigStatsSnrMostRecent	Integer32

CcMuSumStatsShortEntry
SEQUENCE
	ccMuSumStatsShortTimestamp	TimeTicks
	ccMuSumStatsShortNumPkts	Unsigned32
	ccMuSumStatsShortPktsPerSec100	ScaleBy100
	ccMuSumStatsShortPktsPerSecTx100	ScaleBy100
	ccMuSumStatsShortPktsPerSecRx100	ScaleBy100
	ccMuSumStatsShortThroughput	Unsigned32
	ccMuSumStatsShortThroughputTx	Unsigned32
	ccMuSumStatsShortThroughputRx	Unsigned32
	ccMuSumStatsShortAvgBitSpeed	Unsigned32
	ccMuSumStatsShortAvgMuSignal	Integer32
	ccMuSumStatsShortAvgMuNoise	Integer32
	ccMuSumStatsShortAvgMuSnr	Integer32
	ccMuSumStatsShortPp10kNUcastPkts	PartsPer10k
	ccMuSumStatsShortPp10kTxWithRetries	PartsPer10k
	ccMuSumStatsShortPp10kDropped	PartsPer10k
	ccMuSumStatsShortTxAvgRetries100	ScaleBy100
	ccMuSumStatsShortPp10kRxUndecrypt	PartsPer10k

CcMuSumStatsLongEntry
SEQUENCE
	ccMuSumStatsLongTimestamp	TimeTicks
	ccMuSumStatsLongNumPkts	Unsigned32
	ccMuSumStatsLongPktsPerSec100	ScaleBy100
	ccMuSumStatsLongPktsPerSecTx100	ScaleBy100
	ccMuSumStatsLongPktsPerSecRx100	ScaleBy100
	ccMuSumStatsLongThroughput	Unsigned32
	ccMuSumStatsLongThroughputTx	Unsigned32
	ccMuSumStatsLongThroughputRx	Unsigned32
	ccMuSumStatsLongAvgBitSpeed	Unsigned32
	ccMuSumStatsLongAvgMuSignal	Integer32
	ccMuSumStatsLongAvgMuNoise	Integer32
	ccMuSumStatsLongAvgMuSnr	Integer32
	ccMuSumStatsLongPp10kNUcastPkts	PartsPer10k
	ccMuSumStatsLongPp10kTxWithRetries	PartsPer10k
	ccMuSumStatsLongPp10kDropped	PartsPer10k
	ccMuSumStatsLongTxAvgRetries100	ScaleBy100
	ccMuSumStatsLongPp10kRxUndecrypt	PartsPer10k

CcWMEprofileEntry
SEQUENCE
	ccWMEprofileIndex	Integer32
	ccWMEprofilename	DisplayString
	ccWMEprofileDesc	DisplayString
	ccWMEprofileAc1VoEcwmin	Integer32
	ccWMEprofileAc1VoEcwmax	Integer32
	ccWMEprofileAc1VoTxopLimit	Integer32
	ccWMEprofileAc1VoAgTxopLimit	Integer32
	ccWMEprofileAc1VoAifsn	Integer32
	ccWMEprofileAc2ViEcwmin	Integer32
	ccWMEprofileAc2ViEcwmax	Integer32
	ccWMEprofileAc2ViTxopLimit	Integer32
	ccWMEprofileAc2ViAgTxopLimit	Integer32
	ccWMEprofileAc2ViAifsn	Integer32
	ccWMEprofileAc3BeEcwmin	Integer32
	ccWMEprofileAc3BeEcwmax	Integer32
	ccWMEprofileAc3BeTxopLimit	Integer32
	ccWMEprofileAc3BeAgTxopLimit	Integer32
	ccWMEprofileAc3BeAifsn	Integer32
	ccWMEprofileAc4BkEcwmin	Integer32
	ccWMEprofileAc4BkEcwmax	Integer32
	ccWMEprofileAc4BkTxopLimit	Integer32
	ccWMEprofileAc4BkAgTxopLimit	Integer32
	ccWMEprofileAc4BkAifsn	Integer32
	ccWMEprofileQosParam	Integer32
	ccWMEprofileRowStatus	AbbrevRowStatus

CcPortalBeaconRptEntry
SEQUENCE
	ccPortalBeaconRptPortalIndex	INTEGER
	ccPortalBeaconRptNumBeaconsHeard	Integer32
	ccPortalBeaconRptBest	Integer32
	ccPortalBeaconRptWorst	Integer32
	ccPortalBeaconRptSum	Integer32
	ccPortalBeaconRptSumSquares	Integer32
	ccPortalBeaconRptMostRecent	Integer32
	ccPortalBeaconRptLastHeard	DisplayString
	ccPortalBeaconRpFinderMac	DisplayString
	ccPortalBeaconRpFoundMac	DisplayString

CcMuProbeRptEntry
SEQUENCE
	ccMuProbeRptSignalMostRecent	Integer32
	ccMuProbeRptLastHeard	DisplayString
	ccMuProbeRptFinderMac	DisplayString
	ccMuProbeRptFoundMac	DisplayString

CcApSensorEntry
SEQUENCE
	ccApSensorIndex	INTEGER
	ccApSensorMask	IpAddress
	ccApSensorGateWay	IpAddress
	ccApSensorPrimary	IpAddress
	ccApSensorSecondary	IpAddress
	ccApSensorDhcp	TruthValue
	ccApSensorIpaddress	IpAddress
	ccApSensorMac	DisplayString

Defined Values

ccModuleId		1.3.6.1.4.1.388.6.6.1000.1
Description.
MODULE-IDENTITY

symbol		1.3.6.1.4.1.388
OBJECT IDENTIFIER

symbolCC		1.3.6.1.4.1.388.6
OBJECT IDENTIFIER

ws5000		1.3.6.1.4.1.388.6.0
sysOID value for Wireless Switch 5000; (not the family of 5000s, but the actual older 5000 hardware with 128Mb DRAM, 128Mb DOM, 100Mb Ethernet ports). This sysOID value is also reported for Mantis devices.
Status: current	Access: read-write
OBJECT-IDENTITY

ws5100		1.3.6.1.4.1.388.6.0.1
sysOID value for Wireless Switch 5100; (the new hardware first shipping around 7/2004, first supported via software v1.3; upgraded to 256Mb DRAM, 256Mb DOM, 1000Mb Ethernet ports).
Status: current	Access: read-write
OBJECT-IDENTITY

symbolCCSystem		1.3.6.1.4.1.388.6.1
OBJECT IDENTIFIER

ccSysCfg		1.3.6.1.4.1.388.6.1.1
OBJECT IDENTIFIER

ccModuleName		1.3.6.1.4.1.388.6.1.1.1
The name of the Wireless Switch. Changing the switch name will require the KDC configuration to be recreated if it is currently configured. Note that the following characters cannot be part of the name string - . , ' , \ , &, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccModuleDesc		1.3.6.1.4.1.388.6.1.1.2
A description of the Wireless Switch module. Ex.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..255)

ccManufacture		1.3.6.1.4.1.388.6.1.1.3
The manufacturer of the Wireless Switch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ccCopyright		1.3.6.1.4.1.388.6.1.1.4
The Copyright information about the Wireless Switch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ccModuleVer		1.3.6.1.4.1.388.6.1.1.5
The software version for this model.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

ccMaxNumAP		1.3.6.1.4.1.388.6.1.1.6
The maximum number of Access Ports supported by the Wireless Switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..300

ccMaxNumMu		1.3.6.1.4.1.388.6.1.1.7
The maxium number of Mobile Unit supported by the Wireless Switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..1000

ccActivePolicy		1.3.6.1.4.1.388.6.1.1.8
The current Wireless Switch policy for this model.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

ccTaf		1.3.6.1.4.1.388.6.1.1.9
The object is for running TAF executable. Ex. 1. 'addgw $1 $2' addgw: Add a new gateway into the system routing table. $1: new gateway IP $2: IP family More usage: 2. ' ' 4. 'state ' Note:To add gateway to the local network give the value of as <0.0.0.0>. To add gateway to local network first disable dhcp on both NIC.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccSnmpOpers		1.3.6.1.4.1.388.6.1.1.10
This object should be one of the following value: 0 - Soft Kill == Save the current changes in the agent and terminate the agent. 1 - Hard Kill == Just terminate the agent without any saving. 2 - Restart Snmpd == Restart the agent with hardly killing the old one. 3 - Update Config == Update the configuration files for the Agent.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpOpers

ccUptime		1.3.6.1.4.1.388.6.1.1.11
The time since when the Wireless Switch has been up.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

ccFTP		1.3.6.1.4.1.388.6.1.1.12
The status of FTP in the Wireless Switch. True implies that FTP is on.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccTelnet		1.3.6.1.4.1.388.6.1.1.13
The status of Telnet in the Wireless Switch. True implies that Telnet is on.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccWeb		1.3.6.1.4.1.388.6.1.1.14
Returns 'http' or 'https' depending on whether SSL is being used by the web server or not.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(4..10)

ccSNMPFlag		1.3.6.1.4.1.388.6.1.1.15
A 'true' as input forces the Wireless Switch to re-read the SNMP Trap configuration. 'false' is not an acceptable input. This object is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTime		1.3.6.1.4.1.388.6.1.1.16
Set CC time and timezone. Here's the format: 'yyyy/mm/dd hh:mm:dd timezone daylight', where, yyyy = 4 digit of year mm = 2 digit of month [1-12] dd = 2 digit of date [1-31] hh = 2 digit of hour [0-23] mm = 2 digit of minute [0-59] ss = 2 digit of second [0-59]. daylight saving settings= 0 -> Disabled 1 -> USA 2 -> Australia 3 -> Eastern Europe 4 -> Central Europe 5 -> Western Europe timezone = Valid range is -12:00 to +13:00 [+/-](HH:MM) GMT offset, DST style and cities are defined below : (GMT offset)(daylight saving) (zones) (GMT -12:00) 0 Eniwetok, Kwajalein (GMT -11:00) 0 Midway Island, Samoa (GMT -10:00) 0 Hawaii (GMT -09:00) 0,1 Alaska (GMT -08:00) 0,1 Pacific Time (US & Canada); Tijuana (GMT -07:00) 0,1 Arizona, Mountain Time (US & Canada) (GMT -06:00) 0,1 Central America, Central Time (US & Canada), Mexico City, Saskatchewan (GMT -05:00) 0,1 Bogota, Lima, Quito, Eastern Time (US & Canada), Indiana (East) (GMT -04:00) 0,1 Atlantic Time (Canada), Caracas, La Paz, Santiago (GMT -03:30) 0,1 Newfoundland (GMT -03:00) 0,3,4,5 Brasilia, Buenos Aires, Georgetown, Greenland (GMT -02:00) 0,4 Mid-Atlantic (GMT -01:00) 0,3,4,5 Azores, Cape Verde Is (GMT 00:00) 0,3,4,5 Casablanca, Monrovia, Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London (GMT +01:00) 0,3,4,5 Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna, Belgrade, Bratislava, Budapest, Ljubljana, Prague, Brussels, Copenhagen, Madrid, Paris, Sarajevo, Skopje, Sofija, Vilnius, Warsaw, Zagreb, West Central Africa (GMT +02:00) 0,3,4,5 Athens, Istanbul, Minsk, Bucharest, Cairo, Harare, Pretoria, Helsinki, Riga, Tallinn, Jerusalem (GMT +03:00) 0,4,5 Baghdad, Kuwait, Riyadh, Moscow, St. Petersburg, Volgograd, Nairobi (GMT +03:30) 0 Tehran (GMT +04:00) 0,3,4,5 Abu Dhabi, Muscat, Baku, Tbilisi, Yerevan (GMT +04:30) 0 Kabul (GMT +05:00) 0,5 Ekaterinburg, Islamabad, Karachi, Tashkent (GMT +05:30) 0 Calcutta, Chennai, Mumbai, New Delhi (GMT +05:45) 0 Kathmandu (GMT +06:00) 0,4,5 Almaty, Novosibirsk, Astana, Dhaka, Sri Jayawardenepura (GMT +06:30) 0 Rangoon (GMT +07:00) 0,4,5 Bangkok, Hanoi, Jakarta, Krasnoyarsk (GMT +08:00) 0,2,5 Beijing, Chongqing, Hong Kong, Urumqi, Irkutsk, Ulaan Bataar, Kuala Lumpur, Singapore, Perth, Taipei (GMT +09:00) 0,5 Osaka, Sapporo, Tokyo, Seoul, Yakutsk (GMT +09:30) 0,2 Adelaide, Darwin (GMT +10:00) 0,2,5 Brisbane, Canberra, Melbourne, Sydney, Guam, Port Moresby, Hobart, Vladivostok (GMT +11:00) 0,4 Magadan, Solomon Is., New Caledonia (GMT +12:00) 0,2 Auckland, Wellington, Fiji, Kamchatka, Marshall Is. (GMT +13:00) 0 Nuku'alofa
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(21..30)

ccSNMPKdc		1.3.6.1.4.1.388.6.1.1.17
Regardless of the input value, always to disable Snmp KDC feature. After disabling the KDC feature, there is no data returned from the OID tree . The agent will return an error message: No value(s) returned for query.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccCliKdc		1.3.6.1.4.1.388.6.1.1.18
Regardless of the input value, always to disable CLI Kdc feature.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccPolicyAddObj		1.3.6.1.4.1.388.6.1.1.19
Add one Wireless Switch Policy for this Wireless Switch object. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPolicyRemObj		1.3.6.1.4.1.388.6.1.1.20
Remove one Wireless Switch Policy for this Wireless Switch object. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes. Note: You can only remove an UNACTIVE switch policy. Trying to remove a ACTIVE Switch Policy will get an eror like: SNMP Commit fail.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccLicenseCount		1.3.6.1.4.1.388.6.1.1.23
The number of licenses issued to the WS-5000 Wireless Switch. (the number of AP that the switch can adopt at the current state) Note: The number of AP that the system can adopt depends on the state of the Switch. When it is a StandBy and disabled, it will return 0. If it is StandBy and enabled, it will either return 0 (if not connected to a Primary), or the number of AP of its Primary.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccEmergencyPolicy		1.3.6.1.4.1.388.6.1.1.24
The policy which will become the emergency active policy for the switch. In order to undefine an emergency policy, leave the input blank while SETting this variable.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..200)

ccEmergencyMode		1.3.6.1.4.1.388.6.1.1.25
'true' activates the emergency mode. Which means that the switch will immediately start working under the emergency policy if 'true' is sent. 'false' will deactivate the emergency mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRunACS		1.3.6.1.4.1.388.6.1.1.26
Setting it to 'true' will run Automatic Channel Selection. 'false' is not an acceptable input. This object is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEnableSNMPTrap		1.3.6.1.4.1.388.6.1.1.27
Enable/Disable the trap functionality in the switch. 'true' enables it, 'false' disables it
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEnableWVPNSupport		1.3.6.1.4.1.388.6.1.1.28
Enable(1)/Disable(2) WVPN Support. This will reboot the switch and subsequent reboots will have WVPN enabled at startup. Enable(1)/Disable(2) WVPN Support. syntax <1> or <1> , or <2> Note: If no license file name is given then it takes up the default file name . In case of failure error code returned is: Error: 99. While enabling vpnsupport the system does not have a minimum 256MB Ram, need minimum 256MB ram to enable vpn support. Error: 98 While enabling vpnsupport the given License file is invalid use the system interface mac address to get the correct serial number and Obtain a license for that serial number. Error: 97 When user tries to disable vpnsuport and dhcp server is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

ccEnableRap		1.3.6.1.4.1.388.6.1.1.29
Enable the Rogue AP feature on the switch. To begin RogueAP detection, ccDetectorAP has to be enabled for an active AP.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccAPTxPPS		1.3.6.1.4.1.388.6.1.1.30
Display packets transmitted per sec by all APs adapted to WS.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100000

ccAPRxPPS		1.3.6.1.4.1.388.6.1.1.31
Display packets received per sec by all APs adopted to WS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100000

ccAvgTxRetry		1.3.6.1.4.1.388.6.1.1.32
Display transmit retry packets by all AP's adopted to WS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100000

ccAvgRSSI		1.3.6.1.4.1.388.6.1.1.33
Display avg Receive Signal Strength Indicator(RSSI) for the WS.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100000

ccAvgSNR		1.3.6.1.4.1.388.6.1.1.34
Display average Signal to Noise Ratio (SNR) for WS.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100000

ccConfigChangeLast		1.3.6.1.4.1.388.6.1.1.49
Description. Last Configuration Changed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccNTP		1.3.6.1.4.1.388.6.1.1.60
OBJECT IDENTIFIER

ccNtpPrefTimeServer		1.3.6.1.4.1.388.6.1.1.60.1
The IP Address for the preferred time server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccNtpFirstAltTimeServer		1.3.6.1.4.1.388.6.1.1.60.2
The IP Address for the first alternative time server. Note: If the other two Time Servers (prefer time server and the second time server) are invalid time server IP Addresses, this one should be a valid time server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccNtpSecondAltTimeServer		1.3.6.1.4.1.388.6.1.1.60.3
The IP Address for the second alternative time server. Note: If the other two Time Servers (prefer time server and the first time server) are invalid time server IP Addresses, this one should be a valid time server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccNtpGroupSetTimeServer		1.3.6.1.4.1.388.6.1.1.60.4
Instead of setting each object one by one, this entry can be used to set all the time servers at the same time. Input string format: Ex. timesrv_1: 156.234.82.99 timesrv_2: 144.22.121.1 timesrv_3: 221.32.11.33 So, input string becomes <156.234.82.99,144.22.121.1,221.32.11.33> Note: Out of the three IP Addresses, at least one of them must be a valid NTP server IP address. Otherwise, this SET doesn't work. Since this operation takes longer time than others, so please check the TIMEOUT setting in the manager program and make sure that the value should be at least 5 minutes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccNtpDelAll		1.3.6.1.4.1.388.6.1.1.60.5
Delete all NTP servers.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccPolicyTable		1.3.6.1.4.1.388.6.1.2
Wireless Switch Policy Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPolicyEntry

ccPolicyEntry		1.3.6.1.4.1.388.6.1.2.1
The entries of information about the Wireless Switch Policies.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPolicyEntry

ccPolicyIndex		1.3.6.1.4.1.388.6.1.2.1.1
The index of the policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccPolicyName		1.3.6.1.4.1.388.6.1.2.1.2
The name of the policy. The Maximum length of the Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, double quotes,',.,\,& and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPolicyDesc		1.3.6.1.4.1.388.6.1.2.1.3
The description of the policy. The Maximum length of the description can be 128 characters, please note that the following characters cannot be part of description double quotes,' and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccPolicyCountry		1.3.6.1.4.1.388.6.1.2.1.4
The Country Code chosed by this policy.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..2)

ccPolicyDefAdoptAPPolicy		1.3.6.1.4.1.388.6.1.2.1.5
The default AP policy for any adopted Access Port.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccPolicyAPPolicyCount		1.3.6.1.4.1.388.6.1.2.1.6
The number of Access Port policies used by the Wireless Switch policy.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccPolicyAPNameOfPolicy		1.3.6.1.4.1.388.6.1.2.1.7
A list of AP policies applied for this ccPolicy.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccPolicyAddAPPolicy		1.3.6.1.4.1.388.6.1.2.1.8
Add an AP policy to the Wireless Switch Policy. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes. This OID is write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPolicyRmvAPPolicy		1.3.6.1.4.1.388.6.1.2.1.9
Remove an AP policy from the Wireless Switch Policy. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes. This OID is write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPolicyExcludeInfo		1.3.6.1.4.1.388.6.1.2.1.10
Add new entries to be excluded from adoption by the WS5000 Wireless Switch, and view the current exclusion list. This table includs MAC-Start and MAC-End address,and the radio type. The returned string has the format: And the input string has to be in the same format. If there is no End-Mac(i.e. only one MAC address needs to be excluded), just specify the Start Mac, so that the format looks like: . RadioType should be one of 'A', 'B', 'G' or 'FH'. The maximum number of total entries in the list cannot be greater than 200.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..512)

ccPolicyExcludeEdit		1.3.6.1.4.1.388.6.1.2.1.11
Edit the existing Exclude Table. Note: the input string format must be in the following format: 1. 2. . RadioType should be one of 'A', 'B', 'G' or 'FH'. The maximum number of total entries in the list cannot be greater than 200. This OID is write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..512)

ccPolicyExcludeRmv		1.3.6.1.4.1.388.6.1.2.1.12
Remove an existing entry from the Exclude Table in the Adoption List. Note: the input string must be in the format: , where Start-MAC is the starting MAC address of a particular entry. RadioType should be one of 'A', 'B', 'G' or 'FH'. This OID is write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..512)

ccPolicyIncludeInfo		1.3.6.1.4.1.388.6.1.2.1.13
Add new entries to be included for adoption by the WS5000 Wireless Switch. This table includes MAC-Start and MAC-End address,the radio type, and the APPolicy with which the radio will be adopted, upon inclusion. The returned string has the format: And the input string has to be in the same format. If there is no End-Mac(i.e. only one MAC address needs to be included), just specify the start MAC: . RadioType should be one of 'A', 'B', 'G' or 'FH'. The maximum number of total entries in the list cannot be greater than 200.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..512)

ccPolicyIncludeEdit		1.3.6.1.4.1.388.6.1.2.1.14
Edit an existing entry in the Include list for adoption. The entered string should have either of the following format: 1. 2. RadioType should be one of 'A', 'B', 'G' or 'FH'. The maximum number of total entries in the list cannot be greater than 200. This OID is write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..225)

ccPolicyIncludeRmv		1.3.6.1.4.1.388.6.1.2.1.15
Remove an existing entry from the Include Table in the Adoption List. Note: the input string must be in the format: , where Start-MAC is the starting MAC address of a particular entry. RadioType should be one of 'A', 'B', 'G' or 'FH'. This OID is write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

ccPolicyEtherPolicy		1.3.6.1.4.1.388.6.1.2.1.16
The current active Ethernet policy for the Ethernet Port.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccPolicyTrap		1.3.6.1.4.1.388.6.1.2.1.17
The true(1) indicates: send a SNMP trap when deny an AP adoption. The false(2) indicates: not send a SNMP trap when deny an AP adoption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccPolicyDefChannel		1.3.6.1.4.1.388.6.1.2.1.18
The default Channel to be used.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	1..14

ccPolicyDefPower		1.3.6.1.4.1.388.6.1.2.1.19
The default power to be used (in mW). Valid values are :1,5,10,15,100.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

ccPolicyChannel11a		1.3.6.1.4.1.388.6.1.2.1.20
The Channel to be used for 11a radios. Valid values for this channel are: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161 You can also input 'auto-always' for allowing the switch to choose channels automatically. 'auto-once' can be input if you want the switch to choose a channel automatically, only once. Enter 'random' to select a random channel.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccPolicyPower11a		1.3.6.1.4.1.388.6.1.2.1.21
The power to be used (in dbM). Valid values are :4-20
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccPolicyChannel11b		1.3.6.1.4.1.388.6.1.2.1.22
The Channel to be used for 11b radios. Valid values range from 1,2,3... through 14. You can also input 'auto-always' for allowing the switch to choose channels automatically. 'auto-once' can be input if you want the switch to choose a channel automatically, only once. Enter 'random' to select a random channel.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccPolicyPower11b		1.3.6.1.4.1.388.6.1.2.1.23
The power to be used (in dBm). Valid values are :4-20
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccPolicyDSCoExistence		1.3.6.1.4.1.388.6.1.2.1.24
Enable(true)/disable(false) FH and DS coexistence. Set for country code US,Israel,Mexico,Sri Lanka,Japan returns an error and Get returns -1.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccPolicyDefAdoptAPPolicy11a		1.3.6.1.4.1.388.6.1.2.1.25
The default AP policy to be used for adopted 11a radios. To clear the existing policy, leave the input blank.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..200)

ccPolicyDefAdoptAPPolicy11b		1.3.6.1.4.1.388.6.1.2.1.26
The default AP policy to be used for adopted 11b radios. To clear the existing policy, leave the input blank.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..200)

ccPolicyDefAdoptAPPolicyFH		1.3.6.1.4.1.388.6.1.2.1.27
The default AP policy to be used for adopted FH radios. To clear the existing policy, leave the input blank.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..200)

ccPolicyDefAdoptAPPolicy11g		1.3.6.1.4.1.388.6.1.2.1.28
The default AP policy to be used for adopted 11g radios. To clear the existing policy, leave the input blank.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..200)

ccPolicyChannel11g		1.3.6.1.4.1.388.6.1.2.1.29
The default Channel to be used for 11g radios. Valid values are 1 to 14. You can also input 'auto-always' for allowing the switch to choose channels automatically. 'auto-once' can be input if you want the switch to choose a channel automatically, only once. Enter 'random' to select a random channel.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccPolicyPower11g		1.3.6.1.4.1.388.6.1.2.1.30
The power to be used (in dBm). Valid values are :4-20
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccCountryInfoTable		1.3.6.1.4.1.388.6.1.3
Country Information Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcCountryInfoEntry

ccCountryInfoEntry		1.3.6.1.4.1.388.6.1.3.1
An entry in this table indicates one country information.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcCountryInfoEntry

ccCCIndex		1.3.6.1.4.1.388.6.1.3.1.1
Index of the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccCCode		1.3.6.1.4.1.388.6.1.3.1.2
The Country Code for this country
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

ccFullName		1.3.6.1.4.1.388.6.1.3.1.3
The name of this country.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

cc11aChannels		1.3.6.1.4.1.388.6.1.3.1.6
The list of 11a channels applicable to this country.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..1000)

cc11bChannels		1.3.6.1.4.1.388.6.1.3.1.7
The list of 11b channels applicable to this country.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..1000)

ccFHTableNum		1.3.6.1.4.1.388.6.1.3.1.8
The hop sequence table number
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..20

ccFHChannels		1.3.6.1.4.1.388.6.1.3.1.9
List of all FH Channels
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

ccFHAlgorithm		1.3.6.1.4.1.388.6.1.3.1.10
The algorithm used for frequency hopping.
Status: current	Access: read-only
OBJECT-TYPE
	FHAlgorithm

ccFHContiguous		1.3.6.1.4.1.388.6.1.3.1.11
Number of total contiguous channels
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccFHHopSequence		1.3.6.1.4.1.388.6.1.3.1.12
The Hop Sequence used in the frequency hopping algorithm
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..1000)

cc11gChannels		1.3.6.1.4.1.388.6.1.3.1.13
The list of 11g channels applicable to this country.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..1000)

ccOnBoardKerberos		1.3.6.1.4.1.388.6.1.4
OBJECT IDENTIFIER

kerbCfgKDC		1.3.6.1.4.1.388.6.1.4.3
OBJECT IDENTIFIER

kdcType		1.3.6.1.4.1.388.6.1.4.3.1
Represent the current KDC type MASTER/SLAVE. return string format: or or Note: means that no KDC server has been configured yet, and you need to configurate one.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..6)

masterHost		1.3.6.1.4.1.388.6.1.4.3.7
The host name of a remote master KDC used by the on-board Slave-KDC. This object is valid when the onboard KDC is configured is Slave.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

masterIPAddress		1.3.6.1.4.1.388.6.1.4.3.8
The IP address of a remote master KDC used by the on-board Slave-KDC. only valid for creating a Slave-KDC.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

createMsKdc		1.3.6.1.4.1.388.6.1.4.3.9
Configure an on-board Master KDC. Input string format: Input string length limits: realm: 32 bytes interface integer The following characters are not allowed for realm: ` @ # $ & ( ) = | \ ; double-quote ' < > / sp and interface should be 1 or 2. Note: If the on-board KDC is already configured as master or slave then reconfiguring is not possible till the earlier configuration is deleted.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

delMsKdc		1.3.6.1.4.1.388.6.1.4.3.10
True will delete the Master KDC and false is an invalid input.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

createSlvKdc		1.3.6.1.4.1.388.6.1.4.3.11
Configure an on-board Slave KDC. Input string format: Input string length limits: realm: 32 characters hostname: 50 characters For realm, the following characters are not allowed: ` @ # $ & ( ) = | \ ; double-quote ' < > / sp And for hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or last character of the hostname. interface could be 1 or 2 (etherport no.) Note: If the on-board KDC is already configured as master or slave then reconfiguring is not possible till the earlier configuration is deleted.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..150)

delSlvKdc		1.3.6.1.4.1.388.6.1.4.3.12
True will delete the Slave KDC and false is an invalid input.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

kdcRealm		1.3.6.1.4.1.388.6.1.4.3.13
The REALM of the on-board KDC. The Maximum length of the KDC Realm can be 32 characters. Note that the following characters cannot be part of KDC Realm field - `@#$&()|\;'<>/ = and double quotes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

interfaceNumber		1.3.6.1.4.1.388.6.1.4.3.14
The Interface this KDC is to be configured on. Valid Interface values 'ethernet1' & 'ethernet2'.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

addkdcMu		1.3.6.1.4.1.388.6.1.4.3.15
Add a KDC user. This is Write-only. syntax
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

remkdcMu		1.3.6.1.4.1.388.6.1.4.3.16
Remove a KDC user This is Write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

kerbCfgSlave		1.3.6.1.4.1.388.6.1.4.4
OBJECT IDENTIFIER

addSlave		1.3.6.1.4.1.388.6.1.4.4.1
Add one slave kdc into the on-board Master KDC. Input string format: For hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or last character of the hostname. For domain, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

delSlave		1.3.6.1.4.1.388.6.1.4.4.2
Delete one slave kdc from the on-board Master KDC. Input string format: For hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or last character of the hostname. For domain, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

slaveCount		1.3.6.1.4.1.388.6.1.4.4.3
The index of the KDC-Slave for this on-board Kerberos.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

slaveTable		1.3.6.1.4.1.388.6.1.4.4.4
A table of remote Slave-KDC information. Then we assume that the current on-board KDC is a master KDC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlaveEntry

slaveEntry		1.3.6.1.4.1.388.6.1.4.4.4.1
The entries of information about the remote Slave-KDC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SlaveEntry

hostName		1.3.6.1.4.1.388.6.1.4.4.4.1.1
The host name of a remote slave KDC. The Maximum length of the KDC Host Name can be 50 characters. For hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or last character of the hostname.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

realM		1.3.6.1.4.1.388.6.1.4.4.4.1.2
The realm for the remote Slave-KDC. The Maximum length of the KDC Realm can be 32 characters. Note that the following characters cannot be part of KDC Realm field - `@#$&()|\;'<>/ = and double quotes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ipAddress		1.3.6.1.4.1.388.6.1.4.4.4.1.3
The IP address of the remote Slave-KDC.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

domainName		1.3.6.1.4.1.388.6.1.4.4.4.1.4
The domain name of a remote slave KDC. For domain, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..50)

slaveIndex		1.3.6.1.4.1.388.6.1.4.4.4.1.5
The index of the SlaveTable
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

syncDB		1.3.6.1.4.1.388.6.1.4.4.5
Synchronize the slave KDC database. Input string format: For hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or last character of the hostname. For domain, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

kerbCfgNTP		1.3.6.1.4.1.388.6.1.4.5
OBJECT IDENTIFIER

prefTimeServer		1.3.6.1.4.1.388.6.1.4.5.1
The IP address for the preferred time server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

firstAltTimeServer		1.3.6.1.4.1.388.6.1.4.5.2
The IP address for the first alternative time server. Note: If other two Time Server (prefer time server and the second time server ) are invalid time server ip address, this one should be a valid time server ip address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

secondAltTimeServer		1.3.6.1.4.1.388.6.1.4.5.3
The IP address for the second alternative time server. Note: If other two Time Server (prefer time server and the first time server ) are invalid time server ip address, this one should be a valid time server ip address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

groupSetTimeServer		1.3.6.1.4.1.388.6.1.4.5.4
Instead of setting each object one by one, this entry can be used to set all the time servers at the same time. Input string format: Ex. timesrv_1: 156.234.82.99 timesrv_2: 144.22.121.1 timesrv_3: 221.32.11.33 So, input string becomes <156.234.82.99,144.22.121.1,221.32.11.33> Note: Out of the three IP Addresses, at least one of them must be a valid NTP server IP address. Otherwise, this SET doesn't work. Since this operation takes longer time than others, so please check the TIMEOUT setting in the manager program and make sure that the value should be at least 5 minutes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..60)

delAll		1.3.6.1.4.1.388.6.1.4.5.5
Delete all of NTP servers.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

delTimeServer		1.3.6.1.4.1.388.6.1.4.5.6
Delete a Time Server.Enter either '1' or '2' or '3', to delete the preferred, first alternative server, and second alternative server respectively
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

kerbKDCUsers		1.3.6.1.4.1.388.6.1.4.6
OBJECT IDENTIFIER

kdcUserTable		1.3.6.1.4.1.388.6.1.4.6.1
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		KdcUserEntry

kdcUserEntry		1.3.6.1.4.1.388.6.1.4.6.1.1
The Users(MU's) in the KDC with ticketlife.
Status: current	Access: not-accessible
OBJECT-TYPE
	KdcUserEntry

kdcUserIndex		1.3.6.1.4.1.388.6.1.4.6.1.1.1
The Index of the kdcUserEntry table.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4096

kdcUserName		1.3.6.1.4.1.388.6.1.4.6.1.1.2
The list of Users(MU's) registered in the KDC. The Maximum length of the User Name can be 20 characters. Note that the following characters cannot be part of User Name field - ',@,#,$,&,\,<, ,> and double quotes. and double quotes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

kdcUserTlife		1.3.6.1.4.1.388.6.1.4.6.1.1.3
A Kerberos Ticket life time for this user. The range would be in (1 - 600).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

kdcWLANTable		1.3.6.1.4.1.388.6.1.4.6.2
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		KdcWLANEntry

kdcWLANEntry		1.3.6.1.4.1.388.6.1.4.6.2.1
The list of WLAN's registered in the KDC.
Status: current	Access: not-accessible
OBJECT-TYPE
	KdcWLANEntry

kdcWLANIndex		1.3.6.1.4.1.388.6.1.4.6.2.1.1
The index of the WLANs for this on-board Kerberos.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

kdcWLANName		1.3.6.1.4.1.388.6.1.4.6.2.1.2
The name of a WLAN's which has a registered account in the On-Board KDC.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

kdcWLANTlife		1.3.6.1.4.1.388.6.1.4.6.2.1.3
A Kerberos Ticket life time for this WLAN. The range would be in (0 - 600).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

radiusAuthentication		1.3.6.1.4.1.388.6.1.5
OBJECT IDENTIFIER

radiusAuthClientMIB		1.3.6.1.4.1.388.6.1.5.2
OBJECT IDENTIFIER

radiusAuthClientMIBObjects		1.3.6.1.4.1.388.6.1.5.2.1
OBJECT IDENTIFIER

radiusAuthClient		1.3.6.1.4.1.388.6.1.5.2.1.1
OBJECT IDENTIFIER

radiusAuthClientInvalidServerAddresses		1.3.6.1.4.1.388.6.1.5.2.1.1.1
The number of RADIUS Access-Response packets received from unknown addresses
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthServerTable		1.3.6.1.4.1.388.6.1.5.2.1.1.3
The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RadiusAuthServerEntry

radiusAuthServerEntry		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1
An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
Status: current	Access: not-accessible
OBJECT-TYPE
	RadiusAuthServerEntry

radiusAuthServerIndex		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.1
A number uniquely identifying each RADIUS Authentication server with which this client communicates. Note that Index 1 denotes the Primary RADIUS server, while 2 denotes the secondary RADIUS server.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

radiusAuthServerAddress		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.2
The IP address or the name of the RADIUS authentication server referred to in this table entry.The syntax for the input is :,.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

radiusAuthClientServerPortNumber		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.3
The UDP port the client is using to send requests to this server.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

radiusAuthClientRoundTripTime		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.4
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

radiusAuthClientAccessRequests		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.5
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientAccessRetransmissions		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.6
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

radiusAuthClientAccessAccepts		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.7
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientAccessRejects		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.8
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientAccessChallenges		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.9
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientMalformedAccessResponses		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.10
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included as malformed access responses.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientBadAuthenticators		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.11
The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientPendingRequests		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.12
The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Acess-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

radiusAuthClientTimeouts		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.13
The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..20

radiusAuthClientUnknownTypes		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.14
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientPacketsDropped		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.15
The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

radiusAuthClientIdentifier		1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.16
The NAS identifier of the RADIUS authentication client.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

radiusAuthClientMIBConformance		1.3.6.1.4.1.388.6.1.5.2.2
OBJECT IDENTIFIER

radiusAuthClientMIBCompliances		1.3.6.1.4.1.388.6.1.5.2.2.1
OBJECT IDENTIFIER

radiusAuthClientMIBCompliance		1.3.6.1.4.1.388.6.1.5.2.2.1.1
The compliance statement for authentication clients implementing the RADIUS Authentication Client MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

radiusAuthClientMIBGroups		1.3.6.1.4.1.388.6.1.5.2.2.2
OBJECT IDENTIFIER

radiusAuthClientMIBGroup		1.3.6.1.4.1.388.6.1.5.2.2.2.1
The basic collection of objects providing management of RADIUS Authentication Clients.
Status: current	Access: read-only
OBJECT-GROUP

ccEventsObjects		1.3.6.1.4.1.388.6.1.6
OBJECT IDENTIFIER

ccEventsAllLocalLog		1.3.6.1.4.1.388.6.1.6.1
Enable/Disable local logging for all Events. This variable is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEventsAllSNMPTrap		1.3.6.1.4.1.388.6.1.6.2
Enable/Disable SNMP Trap for all Events. This variable is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEventsAllSyslog		1.3.6.1.4.1.388.6.1.6.3
Enable/Disable Syslog for all Events. In order to SET the Syslog level for all Events to a particular severity level, enter the severity level as the input. The accepted severity levels are: 'emerg' for emergency level, 'alert' for alert level, 'crit' for critical level, 'err' for error level, 'warning' for warning level, 'notice' for notice level, 'info' for info level, 'debug' for debug level In order to disable Syslogging for all Events, enter 'disable' as the input (without the single quotes). This variable is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(3..10)

ccEventsAllDefault		1.3.6.1.4.1.388.6.1.6.4
Set all Events to their default state. Only 'true' is a valid input. This variable is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEventTable		1.3.6.1.4.1.388.6.1.6.5
A list of Syslog predefined events
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcEventEntry

ccEventEntry		1.3.6.1.4.1.388.6.1.6.5.1
An entry in the Events Table
Status: current	Access: not-accessible
OBJECT-TYPE
	CcEventEntry

ccEventIndex		1.3.6.1.4.1.388.6.1.6.5.1.1
Index of an specific event.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccEventDescr		1.3.6.1.4.1.388.6.1.6.5.1.2
Description of an specific event.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccEventDefault		1.3.6.1.4.1.388.6.1.6.5.1.3
Set the event to its default state. Only 'true' is an acceptable value. This variable is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEventSyslog		1.3.6.1.4.1.388.6.1.6.5.1.4
Enable/Disable Syslog for this Event. In order to SET the Syslog level for this Event to a particular severity level, enter the severity level as the input. The accepted severity levels are: 'emerg' for emergency level, 'alert' for alert level, 'crit' for critical level, 'err' for error level, 'warning' for warning level, 'notice' for notice level, 'info' for info level, 'debug' for debug level In order to disable Syslogging for this Event, enter 'disable' as the input (without the single quotes)
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccEventSNMPTrap		1.3.6.1.4.1.388.6.1.6.5.1.5
Current SNMP-Trap's status of an specific event. Setting it to 'true' activates the SNMP trap for this particular Event, while 'false' deactivates it
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEventLocalLog		1.3.6.1.4.1.388.6.1.6.5.1.6
Activate/Deactivate local logging. 'true' activates local logging. 'false' deactivates local logging for this particular Event.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSyslogObjects		1.3.6.1.4.1.388.6.1.6.6
OBJECT IDENTIFIER

ccSysLogStatus		1.3.6.1.4.1.388.6.1.6.6.1
To retrieve and set the current syslog settings within CC. Acceptable values are: True(1), False(2)
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSyslogHosts		1.3.6.1.4.1.388.6.1.6.6.2
OBJECT IDENTIFIER

ccSyslogAddHost		1.3.6.1.4.1.388.6.1.6.6.2.1
Add a new Syslog collector host. You also need to provide the IP address of the host, so the input format is : Only the following characters can be part of the hostname: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or the last character of the hostname.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSyslogRemHost		1.3.6.1.4.1.388.6.1.6.6.2.2
Remove an existing Syslog collector host.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccSyslogHostsTable		1.3.6.1.4.1.388.6.1.6.6.2.3
A list of Syslog Hosts
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcSyslogHostsEntry

ccSyslogHostsEntry		1.3.6.1.4.1.388.6.1.6.6.2.3.1
An entry in Syslog Hosts table
Status: current	Access: not-accessible
OBJECT-TYPE
	CcSyslogHostsEntry

ccSyslogHostIndex		1.3.6.1.4.1.388.6.1.6.6.2.3.1.1
Index of specific Syslog Host.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccSyslogHostName		1.3.6.1.4.1.388.6.1.6.6.2.3.1.2
DNS name of specific Syslog Host.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSyslogHostIPAddr		1.3.6.1.4.1.388.6.1.6.6.2.3.1.3
IP address of the Syslog Host
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccSyslogHostDomain		1.3.6.1.4.1.388.6.1.6.6.2.3.1.4
Domain Name of the Syslog Host. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name. If no Domain Name has been specified, then 'NA' is returned by the wireless switch.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSyslogHostSetSeverity		1.3.6.1.4.1.388.6.1.6.6.2.3.1.5
Set the severity level for which this particular host will receive syslog messages. The input format is: where SeverityLevel can be one of the following strings: 'emerg' for emergency level, 'alert' for alert level, 'crit' for critical level, 'err' for error level, 'warning' for warning level, 'notice' for notice level, 'info' for info level, 'debug' for debug level. 'all' as SeverityLevel configures the collector to receive syslog messages for all severity levels. 'on' is used to activate the host for receiving syslog messages. 'off' causes the host to stop receiving syslog messages for that particular severity level. This variable is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSyslogHostSeverityList		1.3.6.1.4.1.388.6.1.6.6.2.3.1.6
The list of all severity levels whose messages this host is configured to receive.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSystemHosts		1.3.6.1.4.1.388.6.1.7
OBJECT IDENTIFIER

ccSystemAddHost		1.3.6.1.4.1.388.6.1.7.1
Add a new System Host. You also need to provide the IP address of the host, so the input format is : Only the following characters can be part of the hostname: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_- Also, '_' and '-' cannot be the first or the last character of the hostname.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSystemRemHost		1.3.6.1.4.1.388.6.1.7.2
Remove an existing System Host.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSystemHostsTable		1.3.6.1.4.1.388.6.1.7.3
A list of Syslog Hosts
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcSystemHostsEntry

ccSystemHostsEntry		1.3.6.1.4.1.388.6.1.7.3.1
An entry in Syslog Hosts table
Status: current	Access: not-accessible
OBJECT-TYPE
	CcSystemHostsEntry

ccSystemHostIndex		1.3.6.1.4.1.388.6.1.7.3.1.1
Index of specific System Host.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccSystemHostName		1.3.6.1.4.1.388.6.1.7.3.1.2
DNS name of specific System Host.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccSystemHostIPAddr		1.3.6.1.4.1.388.6.1.7.3.1.3
IP address of the System Host
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccSystemHostDomain		1.3.6.1.4.1.388.6.1.7.3.1.4
Domain Name of the System Host. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name. If no Domain Name has been specified, then 'NA' is returned by the wireless switch.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccPolicyRCObjects		1.3.6.1.4.1.388.6.1.8
OBJECT IDENTIFIER

ccPolicyRCAddRemTable		1.3.6.1.4.1.388.6.1.8.1
A list of objects used to add/remove items from the Restricted channels list
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPolicyRCAddRemEntry

ccPolicyRCAddRemEntry		1.3.6.1.4.1.388.6.1.8.1.1
An entry in the table of RC Add Remove objects. The two indices are ccPolicyIndex and ccPolicyRadioType. ccPolicyIndex is taken from the ccPolicyTable, and specifies which CCPolicy's Restricted Channel table is being accessed. ccPolicyRadioType is used to specify the type of the radio (A or B) to which the Restricted Channel table belongs
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPolicyRCAddRemEntry

ccPolicyRadioType		1.3.6.1.4.1.388.6.1.8.1.1.1
ccPolicyRadioType is used as one of the indicies to specify the type of the radio (A or B) to which the Restricted Channel table belongs. A value of 1 for this index denotes an 11a radio and 2 denotes an 11b radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..10

ccPolicyRCAdd		1.3.6.1.4.1.388.6.1.8.1.1.2
Add an entry into the RC Table for this CCPolicy and radiotype. If you want to specify a reason for declaring a particular channel as a restricted channel, you can enter the data in this format: . The 'reason' is optional (i.e. you can enter only the channel number) but the channel reason/description if entered, should not be more than 40 characters.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..44)

ccPolicyRCRem		1.3.6.1.4.1.388.6.1.8.1.1.3
Remove an entry from the RC Table for this CCPolicy and radiotype. You just need to specify the channel number which you want to be removed from the table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..300)

ccPolicyRCTable		1.3.6.1.4.1.388.6.1.8.2
A list of restricted channels and their descriptions. (Per CCPolicy, per RadioType)
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPolicyRCEntry

ccPolicyRCEntry		1.3.6.1.4.1.388.6.1.8.2.1
An entry in the Restricted Channels table. The three indices are ccPolicyIndex,ccPolicyRadioType, and ccPolicyRcIndex. ccPolicyIndex is taken from the ccPolicyTable, and specifies which CCPolicy's Restricted Channel table is being accessed. ccPolicyRadioType is used to specify the type of the radio (A or B) to which the Restricted Channel table belongs (index is 1 for 11a, and 2 for 11b). ccPolicyRcIndex specifies one particular listing in the Restricted Channels Table
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPolicyRCEntry

ccPolicyRcIndex		1.3.6.1.4.1.388.6.1.8.2.1.1
The index of the restricted channel
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..300

ccPolicyRCChannelDescr		1.3.6.1.4.1.388.6.1.8.2.1.2
The channel number and description,at this particular index in the Restricted channel table. The returned string is in the format . Note that if no description has been entered for that particular channel, you will receive the reply as , i.e. nothing in the description field
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..44)

ccPolicyObject		1.3.6.1.4.1.388.6.1.9
OBJECT IDENTIFIER

ccPolicyAPPolicyTable		1.3.6.1.4.1.388.6.1.9.2
Table of APPolicies per Wireless Switch Policy
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPolicyAPPolicyEntry

ccPolicyAPPolicyEntry		1.3.6.1.4.1.388.6.1.9.2.1
The entries of APPolicies per Wireless Switch Policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPolicyAPPolicyEntry

ccPolicyAPPolicyIndex		1.3.6.1.4.1.388.6.1.9.2.1.1
The index of the AP policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccPolicyAPPolicyName		1.3.6.1.4.1.388.6.1.9.2.1.2
A list of AP policies applied for this Switch Policy.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

symbolCCInterfaces		1.3.6.1.4.1.388.6.2
OBJECT IDENTIFIER

ccAPPolicyAddObj		1.3.6.1.4.1.388.6.2.1
Add one AP Policy object into the AP Policy table. The Maximum length of the AP Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, double quotes,',.,\,& and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccAPPolicyRemObj		1.3.6.1.4.1.388.6.2.2
Remove one AP Policy object from the AP Policy table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccEPPAddObj		1.3.6.1.4.1.388.6.2.3
Add one Ethernet policy object into the EPP table. The Maximum length of the Ethernet Policy Name can be 50 characters,Note that the following characters cannot be part of Ethernet Policy Name field, double quotes,',.,\,& and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccEPPRemObj		1.3.6.1.4.1.388.6.2.4
Remove one Ethernet policy object from the EPP table. The Maximum length of the Ethernet Policy Name can be 50 characters,Note that the following characters cannot be part of Ethernet Policy Name field, double quotes,',.,\,& and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccAccessPortAddObj		1.3.6.1.4.1.388.6.2.5
Add an access port. The input string should have the following syntax: . dev_mac is the mac address of the Access Port's NIC. dev_type must be one of 'ap300''ap200','ap100', 'ap3020' 'ap4131' or 'ap4121'. For 'ap200' and ap300, radio1 will be considered to be of type 802.11a, and at least one such radio definitely needs to be specified. For 'ap100' 'ap4131' or 'ap4121', only provide the radio1_name value, since there can be only one radio on a 'ap100' 'ap4131' or 'ap4121' accessport, and that one radio definitely has the same MAC address as the device, and also, that one radio is always an 802.11b radio. Similarly, for a device of type 'ap3020', provide only radio1_name, since the FH radio will have the same MAC as that of the device. Note: The following characters cannot be part of radio1_name and radio2_name Name field - ',.,,&, # and double quotes, and the maximum characters allowed for each of these names are 50. few synatx examples are given below:- To add AP100 :,ap100,, Note:radio_mac is optional for Ap100 To add AP3020-3021: ,ap3020,, Note:radio mac is optioanl for AP3020 To add AP300: ,ap300,,,, Note:One can add only 'g' radio also. To add AP200: ,ap200,,,, Note:One can add only 'a' radio also To add AP4121:,ap4121,, Note:radio mac is optional for ap4121 To add AP4131:,ap4132,, Note:radio mac is optional for ap4131
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

ccAccessPortRemObj		1.3.6.1.4.1.388.6.2.6
Remove an AccessPort syntax : When a ap200/ap300 Access port is removed both the radio macs are removed.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccFWLanAddObj		1.3.6.1.4.1.388.6.2.7
Add a LAN to the system.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccFWLanRemObj		1.3.6.1.4.1.388.6.2.8
Remove the LAN from the system.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccAPTable		1.3.6.1.4.1.388.6.2.10
The Table of AccessPorts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcAPEntry

ccAPEntry		1.3.6.1.4.1.388.6.2.10.1
An AccessPort Configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcAPEntry

ccRadioIndex		1.3.6.1.4.1.388.6.2.10.1.28
The Index for the Access port.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..300

ccRadioName		1.3.6.1.4.1.388.6.2.10.1.29
The Name of the Access port. The Maximum length of the Radio Name can be 50 characters. Note that the following characters cannot be part of Radio Name field - ',.,\,&, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccRadioDesc		1.3.6.1.4.1.388.6.2.10.1.30
The description of the Access port. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccRadioOnlineStatus		1.3.6.1.4.1.388.6.2.10.1.31
Online status for this Access port. 0(zero) means 'unavailable' or non-existent. 1 means 'active',, i.e. functional 2 means 'inactive',existent but not functional. 3 means 'alert' indicating that some errors have occured with this accessport. For example, a time-out or a reset.
Status: current	Access: read-only
OBJECT-TYPE
	APOnlineStatus

ccRadioMAC		1.3.6.1.4.1.388.6.2.10.1.32
The MAC address of this radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccDeviceMAC		1.3.6.1.4.1.388.6.2.10.1.33
The MAC address of the device to which this radio belongs.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccDeviceLocation		1.3.6.1.4.1.388.6.2.10.1.34
The location of this device.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ccRadioType		1.3.6.1.4.1.388.6.2.10.1.35
The type of this radio. 'A' or 'B' denote 802.11a and 802.11b respectively. 'FH' denotes an FH radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadioChannel		1.3.6.1.4.1.388.6.2.10.1.36
The channel on which this radio is operating. Valid values for 11a are:34,36,38,40...64. Valid values for 11b are:1,2,3,...14. Also, 'auto-once' is a valid channel if you want switch to choose channel automaticlly. 'auto-always' and 'random' are also valid channels. Note that this property is not applicable to FH radios. So a GET returns the appropriate message, and a SET fails.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccRadioPower		1.3.6.1.4.1.388.6.2.10.1.37
The power on which this radio is operating. Valid values for both 11a and 11b are :1,5,15,30,Full.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

ccRadioPolicy		1.3.6.1.4.1.388.6.2.10.1.38
The policy governing this radio. To clear the existing policy, leave the input blank.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ccDeviceNic		1.3.6.1.4.1.388.6.2.10.1.39
The NIC number on which this device is connected to the WS5000 wireless Switch. Valid Values are 1 or 2
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..20

ccDeviceType		1.3.6.1.4.1.388.6.2.10.1.40
The type of the device. Expect either of 'AP200','AP100','AP300','AP4121','AP3020/3021' as the value.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadioCCAmode		1.3.6.1.4.1.388.6.2.10.1.41
The CCA Mode for the Access port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

ccRadioCCAthresh		1.3.6.1.4.1.388.6.2.10.1.42
The CCA threshold for the Access port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..31

ccRadioDiversity		1.3.6.1.4.1.388.6.2.10.1.43
The antenna setting for the Access Port. Valid values are 0,1 and 2. 0 indicates Full, 1 indicates primary, and 2 indicates secondary.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..10

ccDeviceVlanid		1.3.6.1.4.1.388.6.2.10.1.44
The VLAN id for the Access port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4095

ccDeviceVlanTagsSeen		1.3.6.1.4.1.388.6.2.10.1.45
The Vlan Tags seen by this device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccRadioUptime		1.3.6.1.4.1.388.6.2.10.1.46
The time for which this radio has been up.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadioTxpps		1.3.6.1.4.1.388.6.2.10.1.47
The number of packets transmitted per second between AP and MU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100000

ccRadioMUs		1.3.6.1.4.1.388.6.2.10.1.48
The number of MUs associated with this radio.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

ccRadioGatherStatistics		1.3.6.1.4.1.388.6.2.10.1.49
true(1)/false(2) to turn on/off the functionality of gathering AP statistic data.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRadioReset		1.3.6.1.4.1.388.6.2.10.1.50
A 'true' as input will reset the Radio. 'false' is not an acceptable input. Note that a Reset message can be sent out only if the radio is in 'active' state. This object is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccDeviceClearSeenVlanTags		1.3.6.1.4.1.388.6.2.10.1.51
true(1) will clear the seen Vlans
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

ccDeviceReset		1.3.6.1.4.1.388.6.2.10.1.52
A 'true' as input will reset the Device. 'false' is not an acceptable input. This object is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRadioAuto		1.3.6.1.4.1.388.6.2.10.1.53
'true' enables ACS-on-adoption for this particular radio.'false' disables it.
Status: deprecated	Access: read-only
OBJECT-TYPE
	TruthValue

ccRadioMUPower		1.3.6.1.4.1.388.6.2.10.1.54
The power value to be put in the beacon of this radio. Valid values are : 1,5,15,30,Full,default. Note that 'default' as input causes the beacon to have the same power level as this radio.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ccRadioProtection		1.3.6.1.4.1.388.6.2.10.1.55
Defines whether 'Protection' is On or Off.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..5)

ccRadioShortSlot		1.3.6.1.4.1.388.6.2.10.1.56
Defines whether Short Slot is On or Off.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..5)

ccRadioAntenna		1.3.6.1.4.1.388.6.2.10.1.57
Defines whether antenna type is internal, external or unknown.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

ccRadioCurrentChannel		1.3.6.1.4.1.388.6.2.10.1.58
Current channel.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccRadioAllChannels		1.3.6.1.4.1.388.6.2.10.1.59
A comma seperated list of all channels valid for this radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccRadioPowerdBm		1.3.6.1.4.1.388.6.2.10.1.60
The power on which the radio is configured to operate in dBm. Valid range depends on the country and radio configuration. It is as defined in the 'ccRadioAllPower' object.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccRadioCurrentPower		1.3.6.1.4.1.388.6.2.10.1.61
The power on which the radio is currently operating in dBm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

ccRadioAllPower		1.3.6.1.4.1.388.6.2.10.1.62
The valid power range for the radio in the format 'min_power-max_power'.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

ccRadioMUPowerdBm		1.3.6.1.4.1.388.6.2.10.1.63
Power level adjustment for MU. The valid range is -20 to 20 dB.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadioAntCorrection		1.3.6.1.4.1.388.6.2.10.1.64
Antenna correction factor. The valid range is -20 to 20dBi. Note:This OID is supported only for AP300 device with external antenna
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

ccRadioIndoor		1.3.6.1.4.1.388.6.2.10.1.65
Radio location indoor or outdoor. Valid values are 'in' or 'out'. Note:This OID is supported only for AP300 device with external antenna
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccRadioDFS		1.3.6.1.4.1.388.6.2.10.1.66
DFS status. Valid values are:off,on,active,channel scan. Supported only for 11a radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadioTPC		1.3.6.1.4.1.388.6.2.10.1.67
TPC status. Valid values are: off,on. Supported only for 11a radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadioRadarChannels		1.3.6.1.4.1.388.6.2.10.1.68
A comma seperated list of all channels with timestamps where radar was detected.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccDetectorAp		1.3.6.1.4.1.388.6.2.10.1.69
If this is enabled, the switch uses this AP to detect Rogue APs.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRadioMaxMUs		1.3.6.1.4.1.388.6.2.10.1.70
The number of maximum MUs for the Access port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..256

ccSimulateRadar		1.3.6.1.4.1.388.6.2.10.1.71
True(1) value will set simulateradar. Setting it true sets the Dwell time value. Note: A get over it always return idealState(2) and this OID is supported only for AP300 device type A set operation over other device type's will return Not writeable
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRadioUser802x		1.3.6.1.4.1.388.6.2.10.1.72
Set the 802.1x user name and password Syntax: , Note: This OID is supported only for AP300 device type The maximum length of user and password is 32 each.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

ccAPPolicyTable		1.3.6.1.4.1.388.6.2.11
APPolicy Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcAPPolicyEntry

ccAPPolicyEntry		1.3.6.1.4.1.388.6.2.11.1
An entry in this table indicates the interface policy information.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcAPPolicyEntry

ccAPPolicyIndex		1.3.6.1.4.1.388.6.2.11.1.1
The index of the AP policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccAPPolicyName		1.3.6.1.4.1.388.6.2.11.1.2
The name of the policy. The Maximum length of the Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, double quotes,',.,\,& and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccAPPolicyDesc		1.3.6.1.4.1.388.6.2.11.1.3
The description of the AP policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description double quotes,' and #
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccAPPolicyPreAmble		1.3.6.1.4.1.388.6.2.11.1.10
Long/Short preamble feature for the WLANs in this APPolicy.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(4..5)

ccAPPolicyBeaconInterval		1.3.6.1.4.1.388.6.2.11.1.11
The interval at which beacons are transmitted. Valid values are between 20 to 1000
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	20..1000

ccAPPolicyRTSThreshold		1.3.6.1.4.1.388.6.2.11.1.12
The RTS (Request To Send) threshold for this WLAN. This threshold means that any unicast data or management frames larger than this setting must be transmitted using the RTS/CTS (Clear to Send) handshake exchange. By default, the value is 2347, which has the effect of deactivating RTS/CTS clearing before transmission. Setting the object to 0 activates the RTS/CTS handshake before every transmission. The valid values are from 0 to 2437.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2347

ccAPPolicyDTIM		1.3.6.1.4.1.388.6.2.11.1.13
This setting, always a multiple of the beacon period, determines how often the beacon contains a delivery traffic indication message(DTIM). The DTIM tells power-save client devices that a packet is waiting for them. Valid values are from 1 to 20, both inclusive.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..20

ccAPPolicyBasicRates11a		1.3.6.1.4.1.388.6.2.11.1.14
The Basic Rate set for 11a radios which shall be governed by this policy. Valid values could be any combination of 6,9,12,18,24,36,48,54.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicySupportedRates11a		1.3.6.1.4.1.388.6.2.11.1.15
The Supported Rate set for 11a radios which shall be governed by this policy. Valid values could be any combination of 6,9,12,18,24,36,48,54
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicyBasicRates11b		1.3.6.1.4.1.388.6.2.11.1.16
The Basic Rate set for 11b radios which shall be governed by this policy. Valid values are any combination of 1,2,5.5,11
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicySupportedRates11b		1.3.6.1.4.1.388.6.2.11.1.17
The Supported Rate set for 11b radios which shall be governed by this policy. Valid values are any combination of 1,2,5.5,11
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicyBasicRatesFH		1.3.6.1.4.1.388.6.2.11.1.18
The Basic Rate set for FH radios which shall be governed by this policy. Valid values are any combination of 1 and 2
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicySupportedRatesFH		1.3.6.1.4.1.388.6.2.11.1.19
The Supported Rate set for FH radios which shall be governed by this policy. Valid values are any combination of 1 and 2, or blank
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicyBasicRates11g		1.3.6.1.4.1.388.6.2.11.1.20
The Basic Rate set for 11g radios that shall be governed by this policy. Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicySupportedRates11g		1.3.6.1.4.1.388.6.2.11.1.21
The Supported Rate set for 11g radios that shall be governed by this policy. Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54 or blank.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicyNonSpectrumMgmt		1.3.6.1.4.1.388.6.2.11.1.22
Allow non DFC/TPC MU to associate when spectrum management is required. Valid values:true,false.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicyAddAllWlan		1.3.6.1.4.1.388.6.2.11.1.23
Add a WLAN to a Access Port Policy, WLAN added should be a valid WLAN and should not have already been added to this policy. Upto 16 WLANs can be added to a AP Policy. A get on this object returns nothing. The WLAN added will be added to all the mappings. Use ccAPPolicyAddRemWLAN table for select/unselect a WLAN for mapping, and ccAPPolicyWLANTable for bandwith, bss etc.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccAPPolicyRemAllWlan		1.3.6.1.4.1.388.6.2.11.1.24
Removes a WLAN from a Access Port Policy. The WLAN to be removed should have already been added to this policy. Thw WLAN will be removed from all the mappings and the corresponding primary settings will be reset.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccAPPolicyWMEEnable		1.3.6.1.4.1.388.6.2.11.1.25
Description. Enable/Disable of WME for APPolicy
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccAPPolicyWMEProfile		1.3.6.1.4.1.388.6.2.11.1.26
Description. WME Profile of APpolicy.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccAPPolicyDTIM2		1.3.6.1.4.1.388.6.2.11.1.27
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..20

ccAPPolicyDTIM3		1.3.6.1.4.1.388.6.2.11.1.28
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..20

ccAPPolicyDTIM4		1.3.6.1.4.1.388.6.2.11.1.29
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..20

ccEPTable		1.3.6.1.4.1.388.6.2.12
EtherPorts entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcEPEntry

ccEPEntry		1.3.6.1.4.1.388.6.2.12.1
An ethernet port configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcEPEntry

ccEPIndex		1.3.6.1.4.1.388.6.2.12.1.1
The Index for the Ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccEPNic		1.3.6.1.4.1.388.6.2.12.1.2
This number indicates an index of NIC cards in the system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..10

ccEPName		1.3.6.1.4.1.388.6.2.12.1.3
The Name of this ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

ccEPDesc		1.3.6.1.4.1.388.6.2.12.1.4
The detailed description for the ethernet port. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccEPMacAddr		1.3.6.1.4.1.388.6.2.12.1.5
The Mac address for the Ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccEPEnable		1.3.6.1.4.1.388.6.2.12.1.6
Enable/Disable the ethernet port to be a 802.1q Trunk port. Syntax:For enabling <1,PrimaryVLanId> For disabling <0>.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccEPSpeed		1.3.6.1.4.1.388.6.2.12.1.7
The speed of the ethernet port, such as 10 means the 10 Mps or 100 means 100 Mps.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccEPEnableDHCP		1.3.6.1.4.1.388.6.2.12.1.8
Enable/Disable DHCP server for this Ethernet port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEPIPAddr		1.3.6.1.4.1.388.6.2.12.1.9
The IP address of Ethernet port.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccEPNetMask		1.3.6.1.4.1.388.6.2.12.1.10
The netmask address for the Ethernet port.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccEPDnsCount		1.3.6.1.4.1.388.6.2.12.1.13
The number of DNS used by the ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..999

ccEPDnsList		1.3.6.1.4.1.388.6.2.12.1.14
A list of DNS address for Ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..1042)

ccEPPrimaryVid		1.3.6.1.4.1.388.6.2.12.1.15
Primary VLANId for this etherport. Note: 0 or 4096 means non-trunked(no VLAN)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4095

ccEPOnline		1.3.6.1.4.1.388.6.2.12.1.16
false(2) means the online status of the ethernet port is NOT Active. true(1) means the ethernet port is Active.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccEPDisplayName		1.3.6.1.4.1.388.6.2.12.1.17
The user-friendly name of the Ethernet Port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccEPUptime		1.3.6.1.4.1.388.6.2.12.1.18
The time elapsed since the EtherPort has been up.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccEPTx		1.3.6.1.4.1.388.6.2.12.1.19
The number of output packets transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccEPRx		1.3.6.1.4.1.388.6.2.12.1.20
The number of input packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccEPDomain		1.3.6.1.4.1.388.6.2.12.1.21
The domain name on this Ethernet Port. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last character of the domain name. Note that changing the domain name will require the KDC configuration to be recreated if it is currently configured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccEPGateway		1.3.6.1.4.1.388.6.2.12.1.22
The gateway address being used by the Ethernet port. Note:To add a gateway use ccTaf OID.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccEPCFGMode		1.3.6.1.4.1.388.6.2.12.1.23
The configured mode of this Etherport. Valid inputs are : '10_half','10_full','100_half', '100_full','auto'.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(4..10)

ccEPDuplex		1.3.6.1.4.1.388.6.2.12.1.24
Negotiated mode - duplex
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(4..5)

ccEPMode		1.3.6.1.4.1.388.6.2.12.1.25
Negotiated mode - speed
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(4..5)

ccEPDhcpPriVlan		1.3.6.1.4.1.388.6.2.12.1.26
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEPDDNSStatus		1.3.6.1.4.1.388.6.2.12.1.27
Enable (1) / Disable (2) DDNS updates by DHCP Server
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEPDDNSttl		1.3.6.1.4.1.388.6.2.12.1.28
TTL for DDNS
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccEPDDNSUpdateAll		1.3.6.1.4.1.388.6.2.12.1.29
Update all DDNS entries
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccEPDDNSMUserStatus		1.3.6.1.4.1.388.6.2.12.1.30
Enable (1) / Disable (2) RFC 3004 Multiple User Class
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccEPDDNSDomainName		1.3.6.1.4.1.388.6.2.12.1.31
the domain to be updated by DDNS
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccEPPTable		1.3.6.1.4.1.388.6.2.13
A list of Ethernet port policy entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcEPPEntry

ccEPPEntry		1.3.6.1.4.1.388.6.2.13.1
An Ethernet port policy entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcEPPEntry

ccEPPIndex		1.3.6.1.4.1.388.6.2.13.1.1
The Index for the Ethernet policy.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..200

ccEPPName		1.3.6.1.4.1.388.6.2.13.1.2
Ethernet policy name for one record.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

ccEPPAlias		1.3.6.1.4.1.388.6.2.13.1.3
The Alias for this EtherPort Policy. The Maximum length of the EP Policy Name can be 50 characters. Note that the following characters cannot be part of EP Policy Name field - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccEPPDesc		1.3.6.1.4.1.388.6.2.13.1.4
A description about this ethernet policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccEPPRonnic		1.3.6.1.4.1.388.6.2.13.1.5
This object indicates a NIC port number through which the WS-5000 Wireless Switch will talk to the rest of network. That means, in case of NO VLAN, every incoming packet will go out at this NIC port number.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..200

ccEPPVlanCount		1.3.6.1.4.1.388.6.2.13.1.6
The number of VLANs attached to the Ethernet policy.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..500

ccEPPVlanList		1.3.6.1.4.1.388.6.2.13.1.7
Show a list of VLAN objects attatched to this ethernet policy. Display Format LAN1,LAN2,VLAN:Interface number
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

ccEPPCreateNewVlan		1.3.6.1.4.1.388.6.2.13.1.8
Create a new VLAN in this EtherPort Policy. The input has to be of the format: , where VlanID can be any integer from 1 through 4095, and NicNumber is the etherport on which this VLAN is set. The NicNumber can be either '1','2', or 'all'. 1 as the NicNumber stands for Ethernet1, 2 as the NicNumber stands for Ethernet2, and 'all' stands for both. Note that if the etherport on which this VLAN is to be set, is a non-trunked port, then the VLAN creation will fail. To trunk an etherport, SET the Primary VlanId of that etherport to any integer from 1 through 4095.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccEPPRemVlan		1.3.6.1.4.1.388.6.2.13.1.9
Remove one VLAN from this Etherport policy. Only the Vlan Id needs to be input for removal
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccEPPDropVlan		1.3.6.1.4.1.388.6.2.13.1.10
Drop all the VLANs for this Etherpolicy. A 'true' does the job
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccdot11FHPhyTable		1.3.6.1.4.1.388.6.2.14
The table for FH specific configuration parameters
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Ccdot11FHPhyEntry

ccdot11FHPhyEntry		1.3.6.1.4.1.388.6.2.14.1
An entry in the FH Phy Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Ccdot11FHPhyEntry

ccdot11FHIndex		1.3.6.1.4.1.388.6.2.14.1.1
The index of this FH radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

ccdot11FHHopTime		1.3.6.1.4.1.388.6.2.14.1.2
The time in microseconds for the PMD to change from channel 2 to channel 80.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccdot11FHCurrentChannelNumber		1.3.6.1.4.1.388.6.2.14.1.3
The current channel number of the frequency output by the RF synthesizer.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccdot11FHMaxDwellTime		1.3.6.1.4.1.388.6.2.14.1.4
The maximum time in TU that the transmitter is permitted to operate on a single channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccdot11FHCurrentDwellTime		1.3.6.1.4.1.388.6.2.14.1.5
The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. The valid range is from 25 to 1000 milliseconds (both inclusive). A value of 65535 returned by the switch indicates that there is no value set for this variable.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccdot11FHCurrentSet		1.3.6.1.4.1.388.6.2.14.1.6
The current set of patterns the PHY LME is using to determine the hopping sequence. A value of 255 returned by the switch indicates that there is no value set for this variable.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccdot11FHCurrentPattern		1.3.6.1.4.1.388.6.2.14.1.7
The current pattern the PHY LME is using to determine the hop sequence. A value of 255 returned by the switch indicates that there is no value set for this variable.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccdot11FHCurrentIndex		1.3.6.1.4.1.388.6.2.14.1.8
The current index value the PHY LME is using the determine the CurrentChannelNumber.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccAPPolicyObjects		1.3.6.1.4.1.388.6.2.16
OBJECT IDENTIFIER

ccAPPolicyAddRemWLANTable		1.3.6.1.4.1.388.6.2.16.2
A table for adding and removing WLANs
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcAPPolicyAddRemWLANEntry

ccAPPolicyAddRemWLANEntry		1.3.6.1.4.1.388.6.2.16.2.1
A table for adding and removing WLANs. Select/Unselect and WLAN for a mapping. The second index is the mapping. 1 as its value indicates addition/removal of a WLAN to/from an AP100 (4BSS-4ESS mapping). 2 as its value indicates addition/removal of a WLAN to/from an FH radio (1BSS-1ESS mapping). 3 as its value indicates addition/removal of a WLAN from an AP200-11a radio (1BSS-16ESS mapping). 4 as its value indicates addition/removal of a WLAN from an AP200-11b radio, AP300, AP4121 (4BSS-16ESS mapping).
Status: current	Access: not-accessible
OBJECT-TYPE
	CcAPPolicyAddRemWLANEntry

ccAPPolicyDeviceType		1.3.6.1.4.1.388.6.2.16.2.1.1
The type of mapping to/from which WLANs will be selected/unselected.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

ccAPPolicyAddWLAN		1.3.6.1.4.1.388.6.2.16.2.1.2
Add a WLAN to this particular APPolicy and device. The format for entering the input is , where the sum of all bandwidth for this AP policy and Device Type should be less than or equal to 100%. Also, the bandwidth for any WLAN cannot be less than 5%. Note: 1. Default AP Policy cannot be edited. 2. Always set Bandwidth as 100% if you are adding WLAN to an FH port. Setting the bandwidth to less than 100% for FH results in an error. This also means that at any given instant, no more than one WLANs can be added to an FH Port.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccAPPolicyRemWLAN		1.3.6.1.4.1.388.6.2.16.2.1.3
Remove a WLAN from this particular APPolicy and device. Note:Default AP Policy cannot be edited
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccAPPolicySelectWLAN		1.3.6.1.4.1.388.6.2.16.2.1.4
Select a WLAN for this mapping. The WLAN should already be added to this Access Port Policy for mapping. (4BSS-4ESS) :Four WLANs can be selected, if full unselect a existing WLAN before selecting a different one. (1BSS-1ESS) :One WLAN can be selected for this mapping, if already selected unselect a existing WLAN before selecting a different one. (1BSS-16ESS):Only one WLAN can be made primary so selected WLAN is set as primary. (4BSS-16ESS):One can Select upto maximum of four WLAN as primary.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..100)

ccAPPolicyUnselectWLAN		1.3.6.1.4.1.388.6.2.16.2.1.5
UnSelect a WLAN for this mapping. The WLAN should already have been selected for this mapping. WLAN can be unselected for (4BSS-4ESS) and (1BSS-1ESS) mapping only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..100)

ccAPPolicyWLANTable		1.3.6.1.4.1.388.6.2.16.3
A table for setting attributes of a wlan for a particular mapping for a Access Port Policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcAPPolicyWLANEntry

ccAPPolicyWLANEntry		1.3.6.1.4.1.388.6.2.16.3.1
This table allows Get/Set attributes of a WLAN for a mapping for a particular AP policy. First index is a AP Policy, Second index is the Mapping 1 indicates mapping to/from an AP100 (4BSS-4ESS mapping). 2 indicates mapping of a WLAN to/from an FH radio (1BSS-1ESS mapping). 3 indicates mapping of a WLAN from an AP200-11a radio (1BSS-16ESS mapping). 4 indicates mapping of a WLAN from an AP200-11b radio, AP300, AP4121 (4BSS-16ESS mapping). Third index is the WLAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcAPPolicyWLANEntry

ccAPPolicyWLANIndex		1.3.6.1.4.1.388.6.2.16.3.1.1
The index of this particular WLAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

ccAPPolicyWLAN		1.3.6.1.4.1.388.6.2.16.3.1.2
Name of this particular WLAN which belongs to this APPolicy and this devicetype.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccAPPolicyWLANBW		1.3.6.1.4.1.388.6.2.16.3.1.3
The bandwidth allocated to this particular WLAN, which belongs to this APPolicy and this devicetype. Bandwidth of an FH port is 100% by default, and any attempt to set the bandwidth of an FH port results in an error.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccAPPolicyWLANNP		1.3.6.1.4.1.388.6.2.16.3.1.4
The Network Policy which belongs to this particular WLAN, which belongs to this APPolicy. WLAN must already be configured for this AP Policy to set the Network Policy. SETting of Network Policy takes effect across all the devices, and not for a particular device. As an example, if you SET the Network Policy of a WLAN for the devicetype AP200, the policy will be applied to all the devices of that WLAN. Note that the GET continues to be per device. In order to remove the Network Policy, just leave the field blank while SETting (send an empty string)
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..200)

ccAPPolicyWLANBSS		1.3.6.1.4.1.388.6.2.16.3.1.5
The BSS of this particular WLAN, which belongs to this APPolicy and this devicetype. BSS ID for AP 100, FHSS, AP200a is set to 1 by default and cannot be modifed. BSS ID of AP200b can be set from 1 through 4.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

ccAPPolicyBSSTable		1.3.6.1.4.1.388.6.2.16.4
A table to GET/SET the primary wlan property of a particular bss and device type
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcAPPolicyBSSEntry

ccAPPolicyBSSEntry		1.3.6.1.4.1.388.6.2.16.4.1
This table will GET/SET the primary wlan property 'per APPolicy, per devicetype,per BSS. ccAPPolicyIndex and ccDeviceType are defined earlier. ccAPPolicyBSS is the current BSS whose primary WLAN is being GET/SET. 1 indicates mapping to/from an AP100 (4BSS-4ESS mapping). 2 indicates mapping of a WLAN to/from an FH radio (1BSS-1ESS mapping). 3 indicates mapping of a WLAN from an AP200-11a radio (1BSS-16ESS mapping). 4 indicates mapping of a WLAN from an AP200-11b radio, AP300, AP4121 (4BSS-16ESS mapping).
Status: current	Access: not-accessible
OBJECT-TYPE
	CcAPPolicyBSSEntry

ccAPPolicyBSS		1.3.6.1.4.1.388.6.2.16.4.1.1
The BSS for which the primary wlan property needs to be get/set
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..10)

ccAPPolicyPrimaryWLAN		1.3.6.1.4.1.388.6.2.16.4.1.2
The primary wlan property for this particular APPolicy, per device type and per BSS, the WLAN marked as primary should already be added as a wlan into this policy. Primary WLAN cannot be set for any device except for (1BSS-16ESS) and (4BSS-16ESS) mappings.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..100)

ccFWLANTable		1.3.6.1.4.1.388.6.2.17
A list of LAN descriptors. Note:This Feature is VPN dependent feature hence if vpnsupport is not enabled then the walk over this table will not return anything and the set operation over any OID under this table will return an error message- No creation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcFWLANEntry

ccFWLANEntry		1.3.6.1.4.1.388.6.2.17.1
A LAN descriptor.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcFWLANEntry

ccLANIndex		1.3.6.1.4.1.388.6.2.17.1.1
The Index for the LAN descriptor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

ccLANName		1.3.6.1.4.1.388.6.2.17.1.2
LAN name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccLANDesc		1.3.6.1.4.1.388.6.2.17.1.3
LAN description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

ccLANNATCount		1.3.6.1.4.1.388.6.2.17.1.4
The number of NAT entries attached to a LAN.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

ccLANAddNAT		1.3.6.1.4.1.388.6.2.17.1.5
Create a new NAT entry for this LAN. Syntax: OR The agent will execute the appropriate code depending on the number of input parameters. Valid input values for 'NumberOfEntries' are 0 to 250. The maximum number of NAT mappings allowed are 250. Possible reasons for Commit Fail:- 1.If number of entries are not in the range 0-250. 2.If number of NAT mappings are greater than 250. 3 If the NAT mappings are duplicate. Note:It takes approximately 10 secs to complete the set operation for 250 entries.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccLANRemNAT		1.3.6.1.4.1.388.6.2.17.1.6
Remove one NAT entry from this LAN. Syntax: OR The agent will execute the appropriate code depending on the number of input parameters.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccLANEp		1.3.6.1.4.1.388.6.2.17.1.7
LAN Ethernet Port. Enter an ethernet port number. Valid port numbers are 1 and 2 (for the two physical ethernet ports) as well as 3 (for a virtual VPN port connection). 0 as a port number removes Ethernet Port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

ccLANNp		1.3.6.1.4.1.388.6.2.17.1.8
Network policy associated with this LAN. Enter either the name of an existing network policy, or enter 'remove' to set the current value to blank.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

ccLANPfAllow		1.3.6.1.4.1.388.6.2.17.1.9
Port Filter for this LAN. Valid input values are https ,http ,ftp and telnet .The input values are case sensitive. Only one value can be set at a time.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccLANPfDeny		1.3.6.1.4.1.388.6.2.17.1.10
Port Filter for this LAN. Valid input values are https ,http ,ftp and telnet and web. Only one value can be given at a time.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccFWLANNATTable		1.3.6.1.4.1.388.6.2.18
A list of LAN NAT Entries. This is a dual-index table, NAT entries for all LANs are displayed. A single entry of 0.0.0.0 for a LAN means that LAN has no NAT entries. Note:This Feature is VPN dependent feature hence if vpnsupport is not enabled then the walk over this table will not return anything and the set operation over any OID under this table will return an error message- No creation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcFWLANNATEntry

ccFWLANNATEntry		1.3.6.1.4.1.388.6.2.18.1
A LAN descriptor.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcFWLANNATEntry

ccLANNATIndex		1.3.6.1.4.1.388.6.2.18.1.1
The Index for the NAT entry.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccLANNATRemoteRealIP		1.3.6.1.4.1.388.6.2.18.1.2
The Remote Real IP address in a NAT translation.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccLANNATLocalNatIP		1.3.6.1.4.1.388.6.2.18.1.3
The Local NAT IP address in a NAT translation.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccRouteTable		1.3.6.1.4.1.388.6.2.19
Display current network routing table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRouteEntry

ccRouteEntry		1.3.6.1.4.1.388.6.2.19.1
A Route entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRouteEntry

ccRouteIndex		1.3.6.1.4.1.388.6.2.19.1.1
The Index for the Route entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccRouteDest		1.3.6.1.4.1.388.6.2.19.1.2
The Destination for the Route entry.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccRouteGateway		1.3.6.1.4.1.388.6.2.19.1.3
The Gateway for the Route entry.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccRouteFlags		1.3.6.1.4.1.388.6.2.19.1.4
The Flags for the Route entry. These are standard 'netstat' flags, including (but not limited to): C - Generate new routes on use G - Destination requires forwarding by intermediary H - Host entry (net otherwise) L - Valid protocol to link address translation R - Host or net unreachable U - Route usable
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..10)

ccRouteRefs		1.3.6.1.4.1.388.6.2.19.1.5
The number of references to the Route entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccRouteUse		1.3.6.1.4.1.388.6.2.19.1.6
The Use count for the Route entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccRouteInterface		1.3.6.1.4.1.388.6.2.19.1.7
The Interface for the Route entry.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccRouteGenMask		1.3.6.1.4.1.388.6.2.19.1.8
The netmask for the Route entry
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ccRouteAddObj		1.3.6.1.4.1.388.6.2.20
Add route to the network routing table. Syntax:host or net netmask
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

ccRouteRemObj		1.3.6.1.4.1.388.6.2.21
Remove route from the network routing table. Syntax:host or net netmask
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

ccRouteFlush		1.3.6.1.4.1.388.6.2.22
Remove all routes from the network routing table. when set to True
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccDhcpSrvNIC1		1.3.6.1.4.1.388.6.2.23
OBJECT IDENTIFIER

ccDhcp1Srv		1.3.6.1.4.1.388.6.2.23.1
Enable(1)/Disable(2) DHCP Server on Ethernet 1. Note:DHCP Server can be enabled only on single interface at a time Note:This Feature is VPN dependent feature hence if vpnsupport is not enabled then the walk over ccDhcpSrvNIC1 will not return anything and the set operation over any OID under this table will return an error message- No creation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

ccDhcp1Subnet		1.3.6.1.4.1.388.6.2.23.2
The subnet on Ethernet port 1 that the DHCP Server serves IP address for.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccDhcp1Netmask		1.3.6.1.4.1.388.6.2.23.3
The netmask address for the Ethernet port 1 that the DHCP Server serves IP addresses for.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccDhcp1BcastIP		1.3.6.1.4.1.388.6.2.23.4
The broadcast IP address for the subnet the DHCP Server serves on Ethernet Port 1.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccDhcp1RouterIP		1.3.6.1.4.1.388.6.2.23.5
The default Router/Gateway IP address for the subnet the DHCP Server serves on Ethernet Port 1. To remove the router option set SNMP Set Value to 0.0.0.0 .
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccDhcp1PriDNSIP		1.3.6.1.4.1.388.6.2.23.6
The Primary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 1. To remove domain-name-servers option, set SNMP Set Value to 0.0.0.0 .
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccDhcp1SecDNSIP		1.3.6.1.4.1.388.6.2.23.7
The Secondary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 1. To remove Secondary DNS IP, set SNMP Set Value to 0.0.0.0 .
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccDhcp1DomainName		1.3.6.1.4.1.388.6.2.23.8
The Domain Name for the subnet the DHCP Server serves on Ethernet Port 1. To remove domain-name option, set SNMP Set Value to 0.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..100)

ccDhcp1DefLease		1.3.6.1.4.1.388.6.2.23.9
The Default lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 1. To set to default-lease-time option, set SNMP Set Value to 0 it automatically sets it to 21600(default value).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..31536000

ccDhcp1MaxLease		1.3.6.1.4.1.388.6.2.23.10
The Maximum lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 1. To set to default max-lease-time option, set SNMP Set Value to 0 it automatically sets it to 21600(default value).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..31536000

ccDhcp1IPRangeTable		1.3.6.1.4.1.388.6.2.23.11
A table of DHCP IP Ranges for Ethernet 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp1IPRangeEntry

ccDhcp1IPRangeEntry		1.3.6.1.4.1.388.6.2.23.11.1
A DHCP IP Range entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp1IPRangeEntry

ccDhcp1RangeIndex		1.3.6.1.4.1.388.6.2.23.11.1.1
An integer index for ccDhcp1IPRangeTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp1RangeStartIP		1.3.6.1.4.1.388.6.2.23.11.1.2
The DHCP IP Range Start IP Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1RangeEndIP		1.3.6.1.4.1.388.6.2.23.11.1.3
The DHCP IP Range End IP Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1AddIPRangeObj		1.3.6.1.4.1.388.6.2.23.12
Add a DHCP dynamically assignable IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip].
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1RemIPRangeObj		1.3.6.1.4.1.388.6.2.23.13
Remove a dynamically assignable DHCP IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip].
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1StaticIPTable		1.3.6.1.4.1.388.6.2.23.14
A table of DHCP Static Entries for Ethernet 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp1StaticIPEntry

ccDhcp1StaticIPEntry		1.3.6.1.4.1.388.6.2.23.14.1
A DHCP Static IP entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp1StaticIPEntry

ccDhcp1StaticIPIndex		1.3.6.1.4.1.388.6.2.23.14.1.1
An integer index for ccDhcp2StaticIPTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp1StaticIP		1.3.6.1.4.1.388.6.2.23.14.1.2
The DHCP Static Entry IP Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1StaticMac		1.3.6.1.4.1.388.6.2.23.14.1.3
The DHCP Static Entry MAC Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1StaticHost		1.3.6.1.4.1.388.6.2.23.14.1.4
The DHCP Static Entry host name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1AddStaticIPObj		1.3.6.1.4.1.388.6.2.23.15
Add a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address, mac_address, host_name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1RemStaticIPObj		1.3.6.1.4.1.388.6.2.23.16
Remove a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1OptionTable		1.3.6.1.4.1.388.6.2.23.17
A table of DHCP Options for Ethernet 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp1OptionEntry

ccDhcp1OptionEntry		1.3.6.1.4.1.388.6.2.23.17.1
A DHCP Option entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp1OptionEntry

ccDhcp1OptionIndex		1.3.6.1.4.1.388.6.2.23.17.1.1
An integer index for ccDhcp1OptionTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp1OptionName		1.3.6.1.4.1.388.6.2.23.17.1.2
The DHCP Option name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1OptionCode		1.3.6.1.4.1.388.6.2.23.17.1.3
The DHCP Option Code.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1OptionType		1.3.6.1.4.1.388.6.2.23.17.1.4
The DHCP Option type.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1OptionValue		1.3.6.1.4.1.388.6.2.23.17.1.5
The DHCP option value.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1AddOptionObj		1.3.6.1.4.1.388.6.2.23.18
Add a DHCP option. This is a write-only object. Data input syntax: option_name, option_code, value_type, value value_type = ip-address | text
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1RemOptionObj		1.3.6.1.4.1.388.6.2.23.19
Remove a DHCP option. This is a write-only object. Data input syntax: option_name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1LeasesTable		1.3.6.1.4.1.388.6.2.23.20
A table of DHCP Leases for Ethernet 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp1LeasesEntry

ccDhcp1LeasesEntry		1.3.6.1.4.1.388.6.2.23.20.1
A DHCP lease entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp1LeasesEntry

ccDhcp1LeaseIndex		1.3.6.1.4.1.388.6.2.23.20.1.1
An integer index for ccDhcpLeaseTable1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp1LeaseIP		1.3.6.1.4.1.388.6.2.23.20.1.2
The DHCP lease IP address assigned to MU.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1LeaseMac		1.3.6.1.4.1.388.6.2.23.20.1.3
The DHCP lease MAC address for MU.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1LeaseStartTime		1.3.6.1.4.1.388.6.2.23.20.1.4
The DHCP lease start time.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1LeaseEndTime		1.3.6.1.4.1.388.6.2.23.20.1.5
The DHCP lease expiration time.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp1RemLeaseObj		1.3.6.1.4.1.388.6.2.23.21
Remove a DHCP lease. This is a write-only object. Data input syntax: ip_address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp1RemStaticHost		1.3.6.1.4.1.388.6.2.23.22
Remove a DHCP statically assigned Host name. Data input syntax: Host name. A get operation on ccDhcp1RemStaticHost displays all the available StaticHost's.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccDhcpSrvNIC2		1.3.6.1.4.1.388.6.2.24
OBJECT IDENTIFIER

ccDhcp2Srv		1.3.6.1.4.1.388.6.2.24.1
Enable(1)/Disable(2) DHCP Server on Ethernet 2. Note:DHCP Server can be enabled only on single interface at a time. Note:This Feature is VPN dependent feature hence if vpnsupport is not enabled then the walk over ccDhcpSrvNIC2 will not return anything and the set operation over any OID under this table will return an error message- No creation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

ccDhcp2Subnet		1.3.6.1.4.1.388.6.2.24.2
The subnet on Ethernet port 2 that the DHCP Server serves IP address for.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccDhcp2Netmask		1.3.6.1.4.1.388.6.2.24.3
The netmask address for the Ethernet port 2 that the DHCP Server serves IP addresses for.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccDhcp2BcastIP		1.3.6.1.4.1.388.6.2.24.4
The broadcast IP address for the subnet the DHCP Server serves on Ethernet Port 2.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccDhcp2RouterIP		1.3.6.1.4.1.388.6.2.24.5
The default Router/Gateway IP address for the subnet the DHCP Server serves on Ethernet Port 2. To remove the router option set SNMP Set Value to 0.0.0.0 .
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccDhcp2PriDNSIP		1.3.6.1.4.1.388.6.2.24.6
The Primary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 2. To remove domain-name-servers option, set SNMP Set Value to 0.0.0.0 .
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccDhcp2SecDNSIP		1.3.6.1.4.1.388.6.2.24.7
The Secondary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 2. To remove Secondary DNS IP, set SNMP Set Value to 0.0.0.0 .
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccDhcp2DomainName		1.3.6.1.4.1.388.6.2.24.8
The Domain Name for the subnet the DHCP Server serves on Ethernet Port 2. To remove domain-name option, set SNMP Set Value to 0.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..100)

ccDhcp2DefLease		1.3.6.1.4.1.388.6.2.24.9
The Default lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 2. To set to default-lease-time option, set SNMP Set Value to 0 it automatically sets it to 21600(default value).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..31536000

ccDhcp2MaxLease		1.3.6.1.4.1.388.6.2.24.10
The Maximum lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 2. To set to max-lease-time option, set SNMP Set Value to 0 it automatically sets it to 21600(default value).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..31536000

ccDhcp2IPRangeTable		1.3.6.1.4.1.388.6.2.24.11
A table of DHCP IP Ranges for Ethernet 2.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp2IPRangeEntry

ccDhcp2IPRangeEntry		1.3.6.1.4.1.388.6.2.24.11.1
A DHCP IP Range entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp2IPRangeEntry

ccDhcp2RangeIndex		1.3.6.1.4.1.388.6.2.24.11.1.1
An integer index for ccDhcp1IPRangeTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp2RangeStartIP		1.3.6.1.4.1.388.6.2.24.11.1.2
The DHCP IP Range Start IP Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2RangeEndIP		1.3.6.1.4.1.388.6.2.24.11.1.3
The DHCP IP Range End IP Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2AddIPRangeObj		1.3.6.1.4.1.388.6.2.24.12
Add a DHCP dynamically assignable IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip].
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2RemIPRangeObj		1.3.6.1.4.1.388.6.2.24.13
Remove a dynamically assignable DHCP IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip].
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2StaticIPTable		1.3.6.1.4.1.388.6.2.24.14
A table of DHCP Static Entries for Ethernet 2.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp2StaticIPEntry

ccDhcp2StaticIPEntry		1.3.6.1.4.1.388.6.2.24.14.1
A DHCP Static IP entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp2StaticIPEntry

ccDhcp2StaticIPIndex		1.3.6.1.4.1.388.6.2.24.14.1.1
An integer index for ccDhcp2StaticIPTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp2StaticIP		1.3.6.1.4.1.388.6.2.24.14.1.2
The DHCP Static Entry IP Address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2StaticMac		1.3.6.1.4.1.388.6.2.24.14.1.3
The DHCP Static Entry MAC Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2StaticHost		1.3.6.1.4.1.388.6.2.24.14.1.4
The DHCP Static Entry host name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2AddStaticIPObj		1.3.6.1.4.1.388.6.2.24.15
Add a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address, mac_address, host_name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2RemStaticIPObj		1.3.6.1.4.1.388.6.2.24.16
Remove a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2OptionTable		1.3.6.1.4.1.388.6.2.24.17
A table of DHCP Options for Ethernet 2.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp2OptionEntry

ccDhcp2OptionEntry		1.3.6.1.4.1.388.6.2.24.17.1
A DHCP Option entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp2OptionEntry

ccDhcp2OptionIndex		1.3.6.1.4.1.388.6.2.24.17.1.1
An integer index for ccDhcp2OptionTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccDhcp2OptionName		1.3.6.1.4.1.388.6.2.24.17.1.2
The DHCP Option name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2OptionCode		1.3.6.1.4.1.388.6.2.24.17.1.3
The DHCP Option Code.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2OptionType		1.3.6.1.4.1.388.6.2.24.17.1.4
The DHCP Option type.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2OptionValue		1.3.6.1.4.1.388.6.2.24.17.1.5
The DHCP option value.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2AddOptionObj		1.3.6.1.4.1.388.6.2.24.18
Add a DHCP option. This is a write-only object. Data input syntax: option_name, option_code, value_type, value value_type = ip-address | text
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2RemOptionObj		1.3.6.1.4.1.388.6.2.24.19
Remove a DHCP option. This is a write-only object. Data input syntax: option_name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2LeasesTable		1.3.6.1.4.1.388.6.2.24.20
A table of DHCP Leases for Ethernet 2.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcDhcp2LeasesEntry

ccDhcp2LeasesEntry		1.3.6.1.4.1.388.6.2.24.20.1
A DHCP lease entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcDhcp2LeasesEntry

ccDhcp2LeaseIndex		1.3.6.1.4.1.388.6.2.24.20.1.1
An integer index for ccDhcp2LeaseTable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

ccDhcp2LeaseIP		1.3.6.1.4.1.388.6.2.24.20.1.2
The DHCP lease IP address assigned to MU.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2LeaseMac		1.3.6.1.4.1.388.6.2.24.20.1.3
The DHCP lease MAC address for MU.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2LeaseStartTime		1.3.6.1.4.1.388.6.2.24.20.1.4
The DHCP lease start time.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2LeaseEndTime		1.3.6.1.4.1.388.6.2.24.20.1.5
The DHCP lease expiration time.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

ccDhcp2RemLeaseObj		1.3.6.1.4.1.388.6.2.24.21
Remove a DHCP lease. This is a write-only object. Data input syntax: ip_address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..255)

ccDhcp2RemStaticHost		1.3.6.1.4.1.388.6.2.24.22
Remove a DHCP statically assigned Host name. Data input syntax: Host name. A get operation on ccDhcp2RemStaticHost displays all the available StaticHost's
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

symbolCCMgmt		1.3.6.1.4.1.388.6.3
OBJECT IDENTIFIER

ccWLANAddObj		1.3.6.1.4.1.388.6.3.1
Add one WLAN Object into the WLAN Table. The Maximum length of the WLAN Name can be 50 characters, Note that the following characters cannot be part of WLAN Name field, double quotes,',.,\,& and #.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccWLANRemObj		1.3.6.1.4.1.388.6.3.2
Remove one WLAN Object from the WLAN Table.The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccUserAddObj		1.3.6.1.4.1.388.6.3.3
Add a user to the User Table. The Maximum length of the User name can be 20 characters. Note that the following characters cannot be part of User Name field - ',&,#,\,space, and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccUserRemObj		1.3.6.1.4.1.388.6.3.4
Remove a user from the User Table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccGraphAddObj		1.3.6.1.4.1.388.6.3.5
Add a Graph object to the Graph table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccGraphRemObj		1.3.6.1.4.1.388.6.3.6
Remove a Graph object from the Graph table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecAddObj		1.3.6.1.4.1.388.6.3.11
Add a security object into the table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecRemObj		1.3.6.1.4.1.388.6.3.12
Remove a security object from the table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccACLAddObj		1.3.6.1.4.1.388.6.3.13
Add an ACL object into the table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccACLRemObj		1.3.6.1.4.1.388.6.3.14
Remove an ACL object from the table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccUserTable		1.3.6.1.4.1.388.6.3.21
User information table entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcUserEntry

ccUserEntry		1.3.6.1.4.1.388.6.3.21.1
User Information entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcUserEntry

ccUserID		1.3.6.1.4.1.388.6.3.21.1.1
The user name. Cannot change the user id, but can achieve the same goal through removing and recreating a new user with a different name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccUserFullName		1.3.6.1.4.1.388.6.3.21.1.2
The full name of the user. The Maximum length of the User name can be 20 characters. Note that the following characters cannot be part of User Name field - ',&,#,space and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

ccUserPwd		1.3.6.1.4.1.388.6.3.21.1.3
The user login password to access Wireless Switch services. The Maximum length of the Password is 20 characters. Note that the following characters cannot be part of the password field - ',&,#,\,space and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..20)

ccUserAdminRight		1.3.6.1.4.1.388.6.3.21.1.4
Setting this object to the value gives the user admin rights, takes away the admin rights from the user.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

ccUserProfileMgmtRight		1.3.6.1.4.1.388.6.3.21.1.5
Setting this object to the value gives the user Profile Management rights, takes away the Profile Management rights from the user.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccUserSysAdminRight		1.3.6.1.4.1.388.6.3.21.1.6
Setting this object to the value gives the user Sys-Admin rights, takes away the Sys-Admin rights from the user.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccUserSNMPAdminRight		1.3.6.1.4.1.388.6.3.21.1.7
Setting this object to the value gives the user SNMP- Admin rights, takes away the SNMP-Admin rights from the user.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccUserSecurityAdminRight		1.3.6.1.4.1.388.6.3.21.1.8
Setting this object to the value gives the user Security- Admin rights, takes away the Security-Admin rights from the user.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccUserIndex		1.3.6.1.4.1.388.6.3.21.1.10
The index of the user table.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

ccWLANTable		1.3.6.1.4.1.388.6.3.22
A list of WLAN Object entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcWLANEntry

ccWLANEntry		1.3.6.1.4.1.388.6.3.22.1
A WLAN Object entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcWLANEntry

ccWLANIndex		1.3.6.1.4.1.388.6.3.22.1.1
The index for this WLAN object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccWLANName		1.3.6.1.4.1.388.6.3.22.1.2
The WLAN object name. The Maximum length of the WLAN Name can be 50 characters. Note that the following characters cannot be part of WLAN Name field - ',.,\,&,# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccESSID		1.3.6.1.4.1.388.6.3.22.1.3
The ESSID for the interface.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecurity		1.3.6.1.4.1.388.6.3.22.1.4
A security Policy to be used by this WLAN. If your Network Manager/MIB Browser displays an error message, it is likely that the security policy being added is invalid. To find out what the problem could be with this particular security policy, query the OID 'ccSecCheckValidity' under ccSecurityTable, and make appropriate changes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccACLEnabled		1.3.6.1.4.1.388.6.3.22.1.5
Enable or Disable ACL feature.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccMaxMus		1.3.6.1.4.1.388.6.3.22.1.14
The maximum number of MUs supported by this WLAN.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4096

ccKerberosAuthName		1.3.6.1.4.1.388.6.3.22.1.15
The name used for authenticating to a Kerberos Server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccKerberosAuthPass		1.3.6.1.4.1.388.6.3.22.1.16
The password for authenticating to a Kerberos Server. The minimum length of a password to 6 characters.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..32)

ccWLANACL		1.3.6.1.4.1.388.6.3.22.1.17
The ACL used by this WLAN. For removing the ACL from this WLAN, just input an empty string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccWLANIsAuthenticated		1.3.6.1.4.1.388.6.3.22.1.18
Tells whether the WLAN is authenticated or not.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccWLANMUTraffic		1.3.6.1.4.1.388.6.3.22.1.19
Changes the results of an MU to MU commmunication. 0 indicates that MU to MU traffic is allowed, 1 indicates that it is not allowed and 2 indicates that all MU to MU traffic is dropped.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

ccWLANSecuredBeacon		1.3.6.1.4.1.388.6.3.22.1.20
'true' indicates that beacons need to be secured, while 'false' allows them to be unsecured.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccWLANCurrentMU		1.3.6.1.4.1.388.6.3.22.1.21
The current number of MUs on this WLAN
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4096

ccWLANNetMask		1.3.6.1.4.1.388.6.3.22.1.22
The Network Mask for the subnet.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccWLANDefaultRoute		1.3.6.1.4.1.388.6.3.22.1.23
The IP Address of the default route.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccWLANBCMC11A		1.3.6.1.4.1.388.6.3.22.1.24
WLAN broadcast/multicast encryption type on 802.11a radios.
Status: current	Access: read-only
OBJECT-TYPE
	EncrType

ccWLANBCMC11B		1.3.6.1.4.1.388.6.3.22.1.25
WLAN broadcast/multicast encryption type on 802.11b radios.
Status: current	Access: read-only
OBJECT-TYPE
	EncrType

ccWLANBCMCFH		1.3.6.1.4.1.388.6.3.22.1.26
WLAN broadcast/multicast encryption type on FH radios.
Status: current	Access: read-only
OBJECT-TYPE
	EncrType

ccBroadcastEss		1.3.6.1.4.1.388.6.3.22.1.27
Enable (true)/Disable (false) Broadcast ESS feature for the WLAN. Broadcast ESS feature implies that a probe request containing a zero length SSID will be allowed to associate to the particular SSID that is designated as the broadcast ESS.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccWLANDesc		1.3.6.1.4.1.388.6.3.22.1.28
The description of the WLAN. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccWlanWMEEnable		1.3.6.1.4.1.388.6.3.22.1.29
Description. Enable/Disable of WME for WLAN.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccWlanWMEProfile		1.3.6.1.4.1.388.6.3.22.1.30
Description. WME Profile for WLan
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccKnownCCTable		1.3.6.1.4.1.388.6.3.23
A table of Known Wireless Switch entries
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcKnownCCEntry

ccKnownCCEntry		1.3.6.1.4.1.388.6.3.23.1
The entries of information about the known Wireless Switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcKnownCCEntry

ccKnownCCIndex		1.3.6.1.4.1.388.6.3.23.1.1
An index of the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

ccKnownCCName		1.3.6.1.4.1.388.6.3.23.1.2
A known Wireless Switch name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccKnownCCMac		1.3.6.1.4.1.388.6.3.23.1.3
A known Wireless Switch mac address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..17)

ccKnownAPTable		1.3.6.1.4.1.388.6.3.24
A table of Known Access-Point entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcKnownAPEntry

ccKnownAPEntry		1.3.6.1.4.1.388.6.3.24.1
Entries of information about Known APs.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcKnownAPEntry

ccKnownAPIndex		1.3.6.1.4.1.388.6.3.24.1.1
A index of the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..20000

ccKnownAPMac		1.3.6.1.4.1.388.6.3.24.1.2
A known AP mac address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..17)

ccKnownAPVer		1.3.6.1.4.1.388.6.3.24.1.3
A known AP version.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccKnownAPIP		1.3.6.1.4.1.388.6.3.24.1.4
A known AP IP address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccKnownAPPriority		1.3.6.1.4.1.388.6.3.24.1.5
Priority for the known AP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..20

ccKnownAPMus		1.3.6.1.4.1.388.6.3.24.1.6
The number of MUs associated with the known AP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..1000

ccKnownAPType		1.3.6.1.4.1.388.6.3.24.1.7
The known AP type .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

ccKnownAPAPVer		1.3.6.1.4.1.388.6.3.24.1.8
The known AP version.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

ccKnownAPEssid		1.3.6.1.4.1.388.6.3.24.1.9
A known AP ESSID.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccGraphTable		1.3.6.1.4.1.388.6.3.25
A list of Graph entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcGraphEntry

ccGraphEntry		1.3.6.1.4.1.388.6.3.25.1
Graph Object entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcGraphEntry

ccGraphIndex		1.3.6.1.4.1.388.6.3.25.1.1
The index of the graph.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..200

ccGraphName		1.3.6.1.4.1.388.6.3.25.1.2
The name of the graph.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccGraphWlanId		1.3.6.1.4.1.388.6.3.25.1.7
A WLAN ID attached to this Graph.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

ccVLANTable		1.3.6.1.4.1.388.6.3.26
A list of VLAN Object entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcVLANEntry

ccVLANEntry		1.3.6.1.4.1.388.6.3.26.1
A VLAN Object entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcVLANEntry

ccVLANIndex		1.3.6.1.4.1.388.6.3.26.1.1
The index for this VLAN object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccVLANName		1.3.6.1.4.1.388.6.3.26.1.2
The Name of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ccVLANDesc		1.3.6.1.4.1.388.6.3.26.1.3
A description of the VLAN. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccVLANVid		1.3.6.1.4.1.388.6.3.26.1.4
An id for this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..10000

ccVLANPriority		1.3.6.1.4.1.388.6.3.26.1.5
The priority for this VLAN. The valid values for priority for VLAN is between 0-7.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..7

ccVLANPorts		1.3.6.1.4.1.388.6.3.26.1.6
The ports for this VLAN. 1 means etherport1, 2 means etherport2 and 0 means both etherports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

ccVLANEtherPolicy		1.3.6.1.4.1.388.6.3.26.1.7
The parent etherpolicy of this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccVLANWlan		1.3.6.1.4.1.388.6.3.26.1.8
The number of WLANs attached to this VLAN object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccVLANWlanList		1.3.6.1.4.1.388.6.3.26.1.9
A list of WLANs attatched to this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccVLANAddWlan		1.3.6.1.4.1.388.6.3.26.1.10
Add a WLAN object into this VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccVLANRemWlan		1.3.6.1.4.1.388.6.3.26.1.11
Remove a VLAN object from the VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecurityTable		1.3.6.1.4.1.388.6.3.28
A table of Security entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcSecurityEntry

ccSecurityEntry		1.3.6.1.4.1.388.6.3.28.1
A Security Object entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcSecurityEntry

ccSecIndex		1.3.6.1.4.1.388.6.3.28.1.1
The index for this security object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccSecName		1.3.6.1.4.1.388.6.3.28.1.2
The name of the security policy. The Maximum length of the Policy Name can be 50 characters. Note that the following characters cannot be part of Policy Name field - ',.,\,&,# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccSecDesc		1.3.6.1.4.1.388.6.3.28.1.3
The description of this security policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccSecBeaconEssid		1.3.6.1.4.1.388.6.3.28.1.4
Enable/Disable the beacon Essid for this security policy. The default is TRUE.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecPreSharedAuthEnabled		1.3.6.1.4.1.388.6.3.28.1.5
Enable(true)/Disable(false) pre-shared WEP keys and/or WPA-PSK. Note that enabling this automatically disables Open Encryption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecWEPEnabled		1.3.6.1.4.1.388.6.3.28.1.6
Enable(true)/Disable(false) WEP. Note that enabling this automatically disables Open Encryption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecWEPKeyBitSize		1.3.6.1.4.1.388.6.3.28.1.7
WEP Key size in bits - 40 or 104. Note that if you are planning to use Kerberos as the authentication mechanism, you cannot choose the WEP key size as 40 bits, because Kerberos authentication results in 104 bit keys. Also note that TKIP cannot be used along with 40 bit WEP encryption. If TKIP has to be used along with WEP, the WEP key size must be 104 bits. Further, if Keyguard has to be used along with WEP, then also the WEP key size must be 104 bits.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..104

ccSecWEPKey		1.3.6.1.4.1.388.6.3.28.1.8
This value is used to derive an encryption key which could be 40 bit or 128 bit in size. It will be needed if Shared Key is enabled and encryption type is WEP40 or WEP128. Here's how to enter the values: If you want to input the keys yourself, the format is <>, where number could be anyone of 0,1,2, or 3, depending on which key you want to input. If the WEP key bit size is 40, the valid keylength is 10 characters, and if the WEP key bit size is 104, the valid keylength is 26 characters. If you want the Switch to generate and set all the keys for you,the format is <<'switchgenerate',string>>. The string length should be between 4 and 32. 'switchgenerate' is a keyword here, and should be entered as such (without the single quote). As a further option, you could enter an ASCII string and the agent would convert the ASCII to a hex key. The format for entering this string is <<'agentgenerate',number,string>>. 'agentgenerate' is a keyword here. number is anyone of 0,1,2 or 3 depending on which WEP Key you want to set. The string length should be 5 characters if the hex key has to be 40 bit, and 13 characters if the hex key has to be 104 bit. Note that for all the three formats listed above, '<<' and '>>' are grammar delimiter and are not a part of the input.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(12..50)

ccSecWEPKeyUse		1.3.6.1.4.1.388.6.3.28.1.9
Value of 0 to 3. ex. 0 -- Currently use WEPKEY #1. 1 -- Currently use WEPKEY #2. 2 -- Currently use WEPKEY #3. 3 -- Currently use WEPKEY #4.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

ccSecKerberosEnabled		1.3.6.1.4.1.388.6.3.28.1.10
Enable(1)/Disable(2) Kerberos Authentication. Note that if you choose WEP as the encryption algorithm, you cannot choose the WEP key size to be 40 bits, since Kerberos authentication results in 104 bit WEP keys. Also note that TKIP as the encryption algorithm is currently not supported with Kerberos authentication. Enabling this automatically disables Open Encryption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecKerberosRealm		1.3.6.1.4.1.388.6.3.28.1.11
A Kerberos Realm Name. Needed if Kerberos enabled. ex. APFW.SYMBOL.COM. Note that the following characters are not allowed for realm: ` @ # $ & ( ) = | \ ; double-quote ' < > / sp
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccSecKerberosServer1		1.3.6.1.4.1.388.6.3.28.1.12
1st Kerberos server name or dotted-decimal IP address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccSecKerberosServer2		1.3.6.1.4.1.388.6.3.28.1.13
2nd Kerberos server name or dotted-decimal IP address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccSecKerberosServer3		1.3.6.1.4.1.388.6.3.28.1.14
3rd Kerberos server name or dotted-decimal IP address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccSecKerberosPort1		1.3.6.1.4.1.388.6.3.28.1.15
1st Kerberos Server port number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ccSecKerberosPort2		1.3.6.1.4.1.388.6.3.28.1.16
2nd Kerberos Server port number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ccSecKerberosPort3		1.3.6.1.4.1.388.6.3.28.1.17
3rd Kerberos Server port number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ccSecRadiusServer1		1.3.6.1.4.1.388.6.3.28.1.18
1st RADIUS Server Name/IP or dotted-decimal IP address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccSecRadiusPort1		1.3.6.1.4.1.388.6.3.28.1.19
1st RADIUS Server port number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ccSecRadiusSecret1		1.3.6.1.4.1.388.6.3.28.1.20
1st RADIUS server shared secret.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecRadiusServer2		1.3.6.1.4.1.388.6.3.28.1.21
2nd RADIUS Server Name/IP or dotted-decimal IP address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccSecRadiusPort2		1.3.6.1.4.1.388.6.3.28.1.22
2nd RADIUS Server port number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ccSecRadiusSecret2		1.3.6.1.4.1.388.6.3.28.1.23
2nd RADIUS server shared secret.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecRadiusHostname		1.3.6.1.4.1.388.6.3.28.1.24
Hostname to use with RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccSecEapEnabled		1.3.6.1.4.1.388.6.3.28.1.25
Enable(1)/Disable(2) EAP Authentication. Note that enabling this automatically disables Open Encryption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecEapQuietPeriod		1.3.6.1.4.1.388.6.3.28.1.26
EAP quiet period in seconds. Valid values lie between 1 and 99.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..99

ccSecEapTxPeriod		1.3.6.1.4.1.388.6.3.28.1.27
EAP transmit period in seconds. Valid values are from 1 to 99 seconds
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..99

ccSecEapReauth		1.3.6.1.4.1.388.6.3.28.1.28
Enable(1)/Disable(2) forced EAP Re-Authentication.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecEapReauthPeriod		1.3.6.1.4.1.388.6.3.28.1.29
EAP Reauthentication period in seconds. Valid values are any value between 30 and 65535.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	30..65535

ccSecEapReauthMaxRetries		1.3.6.1.4.1.388.6.3.28.1.30
Max retries for EAP re-authentication. Valid values are from 1 to 99.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..99

ccSecEapSupplTimeout		1.3.6.1.4.1.388.6.3.28.1.31
EAP supplicant timeout in seconds. Valid values are from 1 to 99 seconds.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..99

ccSecEapMaxreqRetries		1.3.6.1.4.1.388.6.3.28.1.32
Maximum retries for EAP requests. Valid values are from 1 to 10.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

ccSecGroupRekeyPeriod		1.3.6.1.4.1.388.6.3.28.1.33
Group key update period in seconds. Valid values are from 30 to 65535 seconds.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	30..65535

ccSecPreSharedKeyMaterial		1.3.6.1.4.1.388.6.3.28.1.34
Preshared Key data, either 8-63 ASCII characters or 64 hex characters.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

ccSecOpenEncryptEnabled		1.3.6.1.4.1.388.6.3.28.1.35
Enable(true)/Disable(false) open encryption. Note that enabling open encryption also enables open authentication.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecKeyGuardEnabled		1.3.6.1.4.1.388.6.3.28.1.36
Enable(true)/Disable(false) KeyGuard encryption. Note that Keyguard doesn't work along with WEP encryption, if the WEP Key size is 40 bits. The WEP key size must be 104 bits for Keyguard to work along with it. Also note that enabling this automatically disables Open Encryption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecTKIPEnabled		1.3.6.1.4.1.388.6.3.28.1.37
Enable(true)/Disable(false) TKIP encryption. Note that in the current implementation, TKIP cannot co-exist with Kerberos. Also note that TKIP cannot co-exist with WEP key encryption, if the WEP key size is 40 bits. The WEP key size must be 104 bits for it to work with TKIP. Note that enabling this automatically disables Open Encryption
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecBCMCEncrType		1.3.6.1.4.1.388.6.3.28.1.38
The encryption type of broadcast/multicast.
Status: deprecated	Access: read-only
OBJECT-TYPE
	EncrType

ccSecCheckValidity		1.3.6.1.4.1.388.6.3.28.1.39
This OID can be used to find out whether this security policy is valid or not. If it is valid, an OK is returned in the response. If not, you get a description as to what the error is. Please note that unless the security policy is valid, it cannot be used anywhere, i.e it cannot be applied to a WLAN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..1000)

ccSecCCMPEnabled		1.3.6.1.4.1.388.6.3.28.1.40
Enable(true)/Disable(false)AES CCMP encryption. This OID is read-only for Default security policy. For all other instances, it is read-write.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecPreAuthentication		1.3.6.1.4.1.388.6.3.28.1.41
Enable(true)/Disable(false)Pre-Authentication. This OID is read-only for 'Default' instance.(ie 'Default' Security policy)
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecPMKCaching		1.3.6.1.4.1.388.6.3.28.1.42
Enable(true)/Disable(false)Opportunistic PMK Caching. This OID is read-only for 'Default' instance.(ie 'Default' security policy)
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSecVPNEnabled		1.3.6.1.4.1.388.6.3.28.1.43
Enable(true)/Disable(false) VPN Authentication. This OID is read-only for 'Default' instance. (ie 'Default' security policy).This OID can be enabled for only one security policy(ie only one instance). Note: If you need to enable this oid for a particular security policy, make sure it is disabled for all other security policies.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccACLTable		1.3.6.1.4.1.388.6.3.29
A table for ACL entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcACLEntry

ccACLEntry		1.3.6.1.4.1.388.6.3.29.1
An ACL object entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcACLEntry

ccACLIndex		1.3.6.1.4.1.388.6.3.29.1.1
The index of this ACL object.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..1000

ccACLName		1.3.6.1.4.1.388.6.3.29.1.2
The name of the ACL. The Maximum length of the ACL Name can be 50 characters. Note that the following characters cannot be part of ACL Name field - ',.,\,&,# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccACLDefaultAction		1.3.6.1.4.1.388.6.3.29.1.3
The default action for this ACL. Is either 'allow' or 'deny'.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(4..5)

ccACLAction		1.3.6.1.4.1.388.6.3.29.1.4
SET only. Setting a new action for an already existing MAC address. Syntax is < allow/deny>,, or ,-,.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(22..100)

ccACLGetItemCount		1.3.6.1.4.1.388.6.3.29.1.5
The number of items in the ACL.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..1000

ccACLGetItem		1.3.6.1.4.1.388.6.3.29.1.6
Show the one item in the ACL list. Here's the format in which the reply is received: < MAC Addr,allow/deny >.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..1024)

ccACLAddItem		1.3.6.1.4.1.388.6.3.29.1.7
SET only. Adding a new rule into the list. Rules have to be added in the format Or . The former is to be used for configuring access for a single MAC address, while the latter configures a range of MAC addresses. Note: AddItem with 0 or 1.0 or x.0 is invalid index number. The index number has to be great than 0.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..1024)

ccACLRemItem		1.3.6.1.4.1.388.6.3.29.1.8
SET only. Removing a rule from the ACL. You need to give only the MAC address to remove the rule from the ACL. For rules which involve more than one MAC Addresses, just give the starting MAC Address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..1024)

ccNPolicyMgmt		1.3.6.1.4.1.388.6.3.30
OBJECT IDENTIFIER

ccNumNPRec		1.3.6.1.4.1.388.6.3.30.1
The total number of NP records in the NP table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccNumPORec		1.3.6.1.4.1.388.6.3.30.2
The total number of Policy Objects in the Policy table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccNumCGRec		1.3.6.1.4.1.388.6.3.30.3
The total number of Classification Groups in the CG table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccNumCFRec		1.3.6.1.4.1.388.6.3.30.4
The total number of Classifiers in the CF table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

ccCFAddObj		1.3.6.1.4.1.388.6.3.30.5
Add one new Classifier object into the table. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCFRemObj		1.3.6.1.4.1.388.6.3.30.6
Remove one Classifier object from the table. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCGAddObj		1.3.6.1.4.1.388.6.3.30.7
Add one Classification Group Object into the ccCGTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCGRemObj		1.3.6.1.4.1.388.6.3.30.8
Remove one Classification Group Object from the ccCGTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPOAddObj		1.3.6.1.4.1.388.6.3.30.9
Add one Policy Object into the ccPOTable. The 'type' of the Policy Object needs to be specified while adding. Here's the syntax: . Type is an integer to be chosen according to the list below: 1) 5 - Outbound AccessPort 2) 6 - Inbound AccessPort 3) 9 - Outbound NIC 4) 10 - Inbound NIC 5) 17 - Outbound Bluetooth 6) 18 - Inbound Bluetooth Only the first two are supported in the current version of the Wireless Switch. Attempts to set other types of Policy Objects will result in an error. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPORemObj		1.3.6.1.4.1.388.6.3.30.10
Remove one Policy Object from the ccPOTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccNPAddObj		1.3.6.1.4.1.388.6.3.30.11
Add one network policy object into the ccNPTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccNPRemObj		1.3.6.1.4.1.388.6.3.30.12
Remove one network policy object from the ccNPTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccNPTable		1.3.6.1.4.1.388.6.3.30.13
A list of Network Policy entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcNPEntry

ccNPEntry		1.3.6.1.4.1.388.6.3.30.13.1
A Network policy table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcNPEntry

ccNPIndex		1.3.6.1.4.1.388.6.3.30.13.1.1
A Network policy index.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccNPName		1.3.6.1.4.1.388.6.3.30.13.1.2
The network policy name. The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',.,\,&, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccNPDesc		1.3.6.1.4.1.388.6.3.30.13.1.3
The description of the network policy name. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of the input string- ',# and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccNPInName		1.3.6.1.4.1.388.6.3.30.13.1.4
The Input network policy name.The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',.,\,&, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccNPOutName		1.3.6.1.4.1.388.6.3.30.13.1.5
The Output network policy name.The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',.,\,&, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPOTable		1.3.6.1.4.1.388.6.3.30.14
A list of Policy Object entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPOEntry

ccPOEntry		1.3.6.1.4.1.388.6.3.30.14.1
A policy table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPOEntry

ccPOIndex		1.3.6.1.4.1.388.6.3.30.14.1.1
A Network policy index.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccPOName		1.3.6.1.4.1.388.6.3.30.14.1.2
The network policy name. The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',.,\,&, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPODesc		1.3.6.1.4.1.388.6.3.30.14.1.3
A description of the network policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of the input string- ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccPOCgCount		1.3.6.1.4.1.388.6.3.30.14.1.4
The count of CGs in the Policy object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccPOAddCg		1.3.6.1.4.1.388.6.3.30.14.1.11
Add a classification group to the policy.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPORemCg		1.3.6.1.4.1.388.6.3.30.14.1.12
Remove a classification group from the policy.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPOType		1.3.6.1.4.1.388.6.3.30.14.1.13
The type of the Policy Object. The returned value denotes one of the following: 1) 5 - Outbound AccessPort 2) 6 - Inbound AccessPort 3) 9 - Outbound NIC 4) 10 - Inbound NIC 5) 17 - Outbound Bluetooth 6) 18 - Inbound Bluetooth Only the first two are supported in the current version of the Wireless Switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..20

ccPOPacketModifier		1.3.6.1.4.1.388.6.3.30.14.1.14
Denotes which of 'TOS','Priority', and 'IP-Redirect' are being used for modifying the packets.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccCGTable		1.3.6.1.4.1.388.6.3.30.15
A table of Classification Group entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcCGEntry

ccCGEntry		1.3.6.1.4.1.388.6.3.30.15.1
A network classificaton group table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcCGEntry

ccCGIndex		1.3.6.1.4.1.388.6.3.30.15.1.1
The index for the traffic classification group entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccCGName		1.3.6.1.4.1.388.6.3.30.15.1.2
A Classification Group name. The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',.,\,&, # and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCGDesc		1.3.6.1.4.1.388.6.3.30.15.1.3
A description of the CG. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccCGCfCount		1.3.6.1.4.1.388.6.3.30.15.1.4
The number of Classifier included in the Classification Group.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccCGAddCf		1.3.6.1.4.1.388.6.3.30.15.1.7
Add a new classifier to the classification group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCGRemCf		1.3.6.1.4.1.388.6.3.30.15.1.8
Remove a classifier from the classification group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCFTable		1.3.6.1.4.1.388.6.3.30.16
A table of Classifier entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcCFEntry

ccCFEntry		1.3.6.1.4.1.388.6.3.30.16.1
A network traffic classifier table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcCFEntry

ccCFIndex		1.3.6.1.4.1.388.6.3.30.16.1.1
The index of Network Traffic classifier.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..100

ccCFName		1.3.6.1.4.1.388.6.3.30.16.1.2
The name of the classifier. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCFDesc		1.3.6.1.4.1.388.6.3.30.16.1.3
The description of a classifier entry. The maximum number of characters allowed is 128, and the following characters cannot be part of the input string - ',# and double quotes.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccCFMcCount		1.3.6.1.4.1.388.6.3.30.16.1.4
The number of Matching Criterion for the classifier.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccCFAddMc		1.3.6.1.4.1.388.6.3.30.16.1.10
Add one Matching Criteria to the Classifier. Choose from the following list of offsets: srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11) Note: This object is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	MCValueOffset

ccCFRemMc		1.3.6.1.4.1.388.6.3.30.16.1.11
Remove one Matching Criteria from the Classifier. Choose from the following list of offsets: srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11) Note: This object is SET-only.
Status: current	Access: read-write
OBJECT-TYPE
	MCValueOffset

ccPOObjects		1.3.6.1.4.1.388.6.3.30.17
OBJECT IDENTIFIER

ccPOCGTable		1.3.6.1.4.1.388.6.3.30.17.2
A list of per Policy Object, per Classificatin Group entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPOCGEntry

ccPOCGEntry		1.3.6.1.4.1.388.6.3.30.17.2.1
An entry of Policy Objects, per Classification Group.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPOCGEntry

ccPOCGIndex		1.3.6.1.4.1.388.6.3.30.17.2.1.1
The index of this Classification Group, per Policy Object
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

ccPOCGName		1.3.6.1.4.1.388.6.3.30.17.2.1.2
The classification group name which belong to the policy object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

ccPOCGNewIP		1.3.6.1.4.1.388.6.3.30.17.2.1.3
The new IP address used by the CG in the Policy Object for IP-Redirect. Valid only for Input Policy Objects. For disabling the use of IP-Redirect,use the string 'disable' as input for this OID.Any valid IP address as the input automatically enables its usage.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..15)

ccPOCGVlanPriority		1.3.6.1.4.1.388.6.3.30.17.2.1.4
The priority of the VLAN in the CG governed by the Policy Object. 0 to 7 only. Valid only for Input Policy Objects (Trying to SET for an Output Policy results in an error). For disabling the use of Vlan Priority, use the string 'disable'. Any value from 0 through 7 automatically enables its usage.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccPOCGTos		1.3.6.1.4.1.388.6.3.30.17.2.1.5
The Type of Service in the Policy Object. This is specific to the enterprise in which the Wireless Switch is deployed.The user has to input a bit pattern of six bits.Valid for both Input and Output Policies.For disabling the TOS, use 'disable' as the input for this OID. Any valid 6-bit sequence automatically enables its usage.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccPOCGBw		1.3.6.1.4.1.388.6.3.30.17.2.1.6
The Bandwidth in the CG of the Policy Object. Valid only for Output Policy (Trying to SET for an Input Policy results in an error). A '-1' in the reply implies that the policy being queried was an Input Policy.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

ccPOCGTxProfile		1.3.6.1.4.1.388.6.3.30.17.2.1.7
The TxProfile of the Policy Object. This controls how the AccessPort treats a packet. Valid only for an Output policy (Trying to SET for an Input Policy results in an error). Values are 0 & 2. 0 is Data 2 is Voice -1 in reply implies that the policy being queried was an Input Policy.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

ccPOCGPacketModifier		1.3.6.1.4.1.388.6.3.30.17.2.1.8
Denotes which of 'TOS','Priority', and 'IP-Redirect' are being used for modifying the packets.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccCGObjects		1.3.6.1.4.1.388.6.3.30.18
OBJECT IDENTIFIER

ccCGCFTable		1.3.6.1.4.1.388.6.3.30.18.2
A table of Classier Entries, per Classification Group.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcCGCFEntry

ccCGCFEntry		1.3.6.1.4.1.388.6.3.30.18.2.1
A Classifier entry, per Classification Group
Status: current	Access: not-accessible
OBJECT-TYPE
	CcCGCFEntry

ccCGCFIndex		1.3.6.1.4.1.388.6.3.30.18.2.1.1
The index of this classifier, per Classification Group
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

ccCGCFAction		1.3.6.1.4.1.388.6.3.30.18.2.1.2
Indicates the allow/deny action for this Classifier belonging to this Classification Group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(4..5)

ccCGCFName		1.3.6.1.4.1.388.6.3.30.18.2.1.3
The name of the classifier in this CG.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCFObjects		1.3.6.1.4.1.388.6.3.30.19
OBJECT IDENTIFIER

ccCFMcTable		1.3.6.1.4.1.388.6.3.30.19.2
A table of Matching Criteria per Classifier.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcCFMcEntry

ccCFMcEntry		1.3.6.1.4.1.388.6.3.30.19.2.1
A Matching Criteria table entry (per Classifier).
Status: current	Access: not-accessible
OBJECT-TYPE
	CcCFMcEntry

ccCFMCIndex		1.3.6.1.4.1.388.6.3.30.19.2.1.1
The index of this Matching Criteria
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

ccCFMCOffset		1.3.6.1.4.1.388.6.3.30.19.2.1.2
The offset of the Matching Criterion. The offsets are: srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11) A '-1' in the reply indicates no offset available.
Status: current	Access: read-only
OBJECT-TYPE
	MCValueOffset

ccCFMCValueCount		1.3.6.1.4.1.388.6.3.30.19.2.1.3
The number of values in this Matching Criterion.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ccCFAddMCValue		1.3.6.1.4.1.388.6.3.30.19.2.1.4
Add one value to the Matching Criteria. For Source and Destination IP, Use syntax : . . /. For Protocol, choose the number from the list: Protocol Number Keyword Protocol References ------- ------- -------- ---------- 0 HOPOPT IPv6 Hop-by-Hop Option [RFC1883] 1 ICMP Internet Control Message [RFC792] 2 IGMP Internet Group Management [RFC1112] 3 GGP Gateway-to-Gateway [RFC823] 4 IP IP in IP (encapsulation) [RFC2003] 5 ST Stream [RFC1190,RFC1819] 6 TCP Transmission Control [RFC793] 7 CBT CBT [Ballardie] 8 EGP Exterior Gateway Protocol [RFC888,DLM1] 9 IGP any private interior gateway [IANA] (used by Cisco for their IGRP) 10 BBN-RCC-MON BBN RCC Monitoring [SGC] 11 NVP-II Network Voice Protocol [RFC741,SC3] 12 PUP PUP [PUP,XEROX] 13 ARGUS ARGUS [RWS4] 14 EMCON EMCON [BN7] 15 XNET Cross Net Debugger [IEN158,JFH2] 16 CHAOS Chaos [NC3] 17 UDP User Datagram [RFC768,JBP] 18 MUX Multiplexing [IEN90,JBP] 19 DCN-MEAS DCN Measurement Subsystems [DLM1] 20 HMP Host Monitoring [RFC869,RH6] 21 PRM Packet Radio Measurement [ZSU] 22 XNS-IDP XEROX NS IDP [ETHERNET,XEROX] 23 TRUNK-1 Trunk-1 [BWB6] 24 TRUNK-2 Trunk-2 [BWB6] 25 LEAF-1 Leaf-1 [BWB6] 26 LEAF-2 Leaf-2 [BWB6] 27 RDP Reliable Data Protocol [RFC908,RH6] 28 IRTP Internet Reliable Transaction [RFC938,TXM] 29 ISO-TP4 ISO Transport Protocol Class 4 [RFC905,RC77] 30 NETBLT Bulk Data Transfer Protocol [RFC969,DDC1] 31 MFE-NSP MFE Network Services Protocol [MFENET,BCH2] 32 MERIT-INP MERIT Internodal Protocol [HWB] 33 SEP Sequential Exchange Protocol [JC120] 34 3PC Third Party Connect Protocol [SAF3] 35 IDPR Inter-Domain Policy Routing Protocol [MXS1] 36 XTP XTP [GXC] 37 DDP Datagram Delivery Protocol [WXC] 38 IDPR-CMTP IDPR Control Message Transport Proto [MXS1] 39 TP++ TP++ Transport Protocol [DXF] 40 IL IL Transport Protocol [Presotto] 41 IPv6 Ipv6 [Deering] 42 SDRP Source Demand Routing Protocol [DXE1] 43 IPv6-Route Routing Header for IPv6 [Deering] 44 IPv6-Frag Fragment Header for IPv6 [Deering] 45 IDRP Inter-Domain Routing Protocol [Sue Hares] 46 RSVP Reservation Protocol [Bob Braden] 47 GRE General Routing Encapsulation [Tony Li] 48 MHRP Mobile Host Routing Protocol[David Johnson] 49 BNA BNA [Gary Salamon] 50 ESP Encapsulating Security Payload [RFC1827] 51 AH Authentication Header [RFC1826] 52 I-NLSP Integrated Net Layer Security TUBA [GLENN] 53 SWIPE IP with Encryption [JI6] 54 NARP NBMA Address Resolution Protocol [RFC1735] 55 MOBILE IP Mobility [Perkins] 56 TLSP Transport Layer Security Protocol [Oberg] using Kryptonet key management 57 SKIP SKIP [Markson] 58 IPv6-ICMP ICMP for IPv6 [RFC1883] 59 IPv6-NoNxt No Next Header for IPv6 [RFC1883] 60 IPv6-Opts Destination Options for IPv6 [RFC1883] 61 any host internal protocol [IANA] 62 CFTP CFTP [CFTP,HCF2] 63 any local network [IANA] 64 SAT-EXPAK SATNET and Backroom EXPAK [SHB] 65 KRYPTOLAN Kryptolan [PXL1] 66 RVD MIT Remote Virtual Disk Protocol [MBG] 67 IPPC Internet Pluribus Packet Core [SHB] 68 any distributed file system [IANA] 69 SAT-MON SATNET Monitoring [SHB] 70 VISA VISA Protocol [GXT1] 71 IPCV Internet Packet Core Utility [SHB] 72 CPNX Computer Protocol Network Executive [DXM2] 73 CPHB Computer Protocol Heart Beat [DXM2] 74 WSN Wang Span Network [VXD] 75 PVP Packet Video Protocol [SC3] 76 BR-SAT-MON Backroom SATNET Monitoring [SHB] 77 SUN-ND SUN ND PROTOCOL-Temporary [WM3] 78 WB-MON WIDEBAND Monitoring [SHB] 79 WB-EXPAK WIDEBAND EXPAK [SHB] 80 ISO-IP ISO Internet Protocol [MTR] 81 VMTP VMTP [DRC3] 82 SECURE-VMTP SECURE-VMTP [DRC3] 83 VINES VINES [BXH] 84 TTP TTP [JXS] 85 NSFNET-IGP NSFNET-IGP [HWB] 86 DGP Dissimilar Gateway Protocol [DGP,ML109] 87 TCF TCF [GAL5] 88 EIGRP EIGRP [CISCO,GXS] 89 OSPFIGP OSPFIGP [RFC1583,JTM4] 90 Sprite-RPC Sprite RPC Protocol [SPRITE,BXW] 91 LARP Locus Address Resolution Protocol [BXH] 92 MTP Multicast Transport Protocol [SXA] 93 AX.25 AX.25 Frames [BK29] 94 IPIP IP-within-IP Encapsulation Protocol [JI6] 95 MICP Mobile Internetworking Control Pro. [JI6] 96 SCC-SP Semaphore Communications Sec. Pro. [HXH] 97 ETHERIP Ethernet-within-IP Encapsulation [RDH1] 98 ENCAP Encapsulation Header [RFC1241,RXB3] 99 any private encryption scheme [IANA] 100 GMTP GMTP [RXB5] 101 IFMP Ipsilon Flow Management Protocol [Hinden] 102 PNNI PNNI over IP [Callon] 103 PIM Protocol Independent Multicast [Farinacci] 104 ARIS ARIS [Feldman] 105 SCPS SCPS [Durst] 106 QNX QNX [Hunter] 107 A/N Active Networks [Braden] 108 IPComp IP Payload Compression Protocol [RFC2393] 109 SNP Sitara Networks Protocol [Sridhar] 110 Compaq-Peer Compaq Peer Protocol [Volpe] 111 IPX-in-IP IPX in IP [Lee] 112 VRRP Virtual Router Redundancy Protocol [Hinden] 113 PGM PGM Reliable Transport Protocol [Speakman] 114 any 0-hop protocol [IANA] 115 L2TP Layer Two Tunneling Protocol [Aboba] 116 DDX D-II Data Exchange (DDX) [Worley] 117 IATP Interactive Agent Transfer Protocol [Murphy] 118 STP Schedule Transfer Protocol [JMP] 119 SRP SpectraLink Radio Protocol [Hamilton] 120 UTI UTI [Lothberg] 121 SMP Simple Message Protocol [Ekblad] 122 SM SM [Crowcroft] 123 PTP Performance Transparency Protocol [Welzl] 124 ISIS over IPv4 [Przygienda] 125 FIRE [Partridge] 126 CRTP Combat Radio Transport Protocol [Sautter] 127 CRUDP Combat Radio User Datagram [Sautter] 128 SSCOPMCE [Waber] 129 IPLT [Hollbach] 130 SPS Secure Packet Shield [McIntosh] 131 PIPE Private IP Encapsulation within IP [Petri] 132 SCTP Stream Control Transmission Protocol [Stewart] 133 FC Fibre Channel [Rajagopal] 134 RSVP-E2E-IGNORE [RFC3175] 135-254 Unassigned [IANA] 255 Reserved [IANA] This is Write only
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccCFRemMCValue		1.3.6.1.4.1.388.6.3.30.19.2.1.5
Remove one value from the Matching Criteria. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes. This is Write-only.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..50)

ccCFMcValTable		1.3.6.1.4.1.388.6.3.30.19.3
A table of the values per Matching Criterion.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcCFMcValEntry

ccCFMcValEntry		1.3.6.1.4.1.388.6.3.30.19.3.1
An entry of Matching Criteria values (per Classifier, per Matching Criteria).
Status: current	Access: not-accessible
OBJECT-TYPE
	CcCFMcValEntry

ccCFMcValIndex		1.3.6.1.4.1.388.6.3.30.19.3.1.1
The index of this value in the Matching Criteria.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..200

ccCFMCValue		1.3.6.1.4.1.388.6.3.30.19.3.1.2
The value of the Matching Criterion. For Source and Destination IP, the returned value is of the format: /
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..1024)

ccHSBConfigure		1.3.6.1.4.1.388.6.3.31
OBJECT IDENTIFIER

ccHsbEnabled		1.3.6.1.4.1.388.6.3.31.1
Setting ccHsbEnabled to enables the Standby Management feature, Setting ccHsbEnabled to disables the Standby Management feature Mower: default value is FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccHsbMode		1.3.6.1.4.1.388.6.3.31.2
Standby Mode of the wireless switch, Primary or Standby
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccHsbMacAddress1		1.3.6.1.4.1.388.6.3.31.3
MAC address for establishing the heartbeat When the MAC address is set to 00:00:00:00:00:00 it sets the option to Auto discovery Enabled Note:Disable ccHsbEnabled first to set this OID
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccHsbMacAddress2		1.3.6.1.4.1.388.6.3.31.4
Second Mac address for establishing the heartbeat When the MAC address is set to 00:00:00:00:00:00 it sets the option to Auto discovery Enabled Note:Disable ccHsbEnabled first to set this OID
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccHsbHeartbeatEnabledOnInterface1		1.3.6.1.4.1.388.6.3.31.5
Setting to enables the heartbeat on interface 1, Setting to enables the heartbeat on interface 1 Mower: default value is TRUE. Note:Disable ccHsbEnabled first to set this OID
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccHsbHeartbeatEnabledOnInterface2		1.3.6.1.4.1.388.6.3.31.6
Setting to enables the heartbeat on interface 2, Setting to enables the heartbeat on interface 2 Mower: default value is FALSE. Note:Disable ccHsbEnabled first to set this OID
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccHsbConnectivityFlag		1.3.6.1.4.1.388.6.3.31.7
Tells the user if connectivity (heartbeat) between the Primary and Standby is established Mower: default value is FALSE.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccHsbFailoverState		1.3.6.1.4.1.388.6.3.31.8
This is the state of the Wireless switch. Here are the states 1: Startup 2: Find Standby 3: Waiting for Connectivity 4: Connected 5: Halted 6: Monitoring 7: Acting as Primary 8: Trying to Reconnect 9: Re-Connected 10: Auto-Reverting
Status: current	Access: read-only
OBJECT-TYPE
	HsbState

ccHsbFailoverReason		1.3.6.1.4.1.388.6.3.31.9
This parameter tells the reason for failover.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccHsbResetCode		1.3.6.1.4.1.388.6.3.31.10
This is a number set by the Wireless switch when it reboots.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ccHsbRevert		1.3.6.1.4.1.388.6.3.31.11
This is a Boolean variable. When the manager sets this variable to true the standby-active will revert to standby and disabled-primary will revert to primary. Reading this value results in a -1 being returned. Mower: default value is FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccHsbautorevert		1.3.6.1.4.1.388.6.3.31.12
State of the Auto Revert Function (Enabled/Disabled) Note:Disable ccHsbEnabled first to set this OID
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccHsbautorevertdelay		1.3.6.1.4.1.388.6.3.31.13
Number of Minutes to delay after re-connecting before autoreverting Note:Disable ccHsbEnabled first to set this OID
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..9999

ccMUInfoTable		1.3.6.1.4.1.388.6.3.32
A table for MU Information entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMUInfoEntry

ccMUInfoEntry		1.3.6.1.4.1.388.6.3.32.1
An MU information object entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMUInfoEntry

ccMUInfoIndex		1.3.6.1.4.1.388.6.3.32.1.1
The index of MU Information Table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

ccMUInfoType		1.3.6.1.4.1.388.6.3.32.1.2
Indicates the device type of this Mobile Unit. 0 = Data 1 = Voice 2 = Wireless AP.
Status: current	Access: read-only
OBJECT-TYPE
	MUDeviceType

ccMUInfoMac		1.3.6.1.4.1.388.6.3.32.1.3
MAC address for this MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

ccMUInfoIP		1.3.6.1.4.1.388.6.3.32.1.4
IP address for this MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

ccMUInfoWlan		1.3.6.1.4.1.388.6.3.32.1.5
WLAN name that the MU is on currently.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoEssid		1.3.6.1.4.1.388.6.3.32.1.6
ESSID currently selected by this MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoAP		1.3.6.1.4.1.388.6.3.32.1.7
Displays the AP name this MU is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMUInfoAPState		1.3.6.1.4.1.388.6.3.32.1.8
Indicates the association status of the AccessPort. Association Status: 0 = Away 1 = Associated
Status: current	Access: read-only
OBJECT-TYPE
	APStatus

ccMUInfoSecState		1.3.6.1.4.1.388.6.3.32.1.9
The security status for this MU. 0 = No Encryption 1 = WEP (per MU Key) 2 = WEP (Shared Key) 3 = TKIP (Per MU Key) 4 = TKIP (Shared Key)
Status: current	Access: read-only
OBJECT-TYPE
	MUSecurityStatus

ccMUInfoCurRate		1.3.6.1.4.1.388.6.3.32.1.10
Indicates the current communication rate on the MU. 0 = 1 Mbps 1 = 2 Mbps 2 = 5.5 Mbps 3 = 6 Mbps 4 = 9 Mbps 5 = 11 Mbps 6 = 12 Mbps 7 = 18 Mbps 8 = 22 Mbps 9 = 24 Mbps 10 = 36 Mbps 11 = 48 Mbps 12 = 54 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	CurrentRate

ccMUInfoSupRates		1.3.6.1.4.1.388.6.3.32.1.11
Indicates the current supported rates. This object meaning can be explained as the following: 1_Mbps(1) --- 1 Mbit supported. 2_Mbps(2) --- 2 Mbit supported. 1_2_Mbps(3) --- 1,2 Mbit supported. 5.5_Mbps(4) --- 5.5 Mbit supported. 1_5.5_Mbps(5) --- 1, 5.5 Mbit supported. 2_5.5_Mbps(6) --- 2, 5.5 Mbit supported. 1_2_5.5_Mbps(7) --- 1,2,5.5 Mbit supported. 11_Mbps(8) --- 11 Mbit supported. 1_11_Mbps(9) --- 1,11 Mbit supported. 2_11_Mbps(10) --- 2,11 Mbit supported. 1_2_11_Mbps(11) --- 1,2,11 Mbit supported. 5.5_11_Mbps(12) --- 5.5,11 Mbit supported. 1_5.5_11_Mbps(13) --- 1,5.5,11 Mbit supported. 2_5.5_11_Mbps(14) --- 2,5.5,11 Mbit supported. 1_2_5.5_11_Mbps(15) --- 1,2,5.5,11 Mbit supported.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

ccMUInfoRssi		1.3.6.1.4.1.388.6.3.32.1.12
Receive signal strength indicator (RSSI) of this MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

ccMUInfoPsp		1.3.6.1.4.1.388.6.3.32.1.13
Indicates the current power mode setting on this MU. In PSP mode the radio receiver is configured to conserve battery life. 0 = Continuous Access Mode (CAM) mode 1 = Power Save Polling Mode(PSP) mode
Status: current	Access: read-only
OBJECT-TYPE
	PSPowerMode

ccMUInfoIntf		1.3.6.1.4.1.388.6.3.32.1.14
The interface type displayed on the associated AP GUI. Like: 'RF'.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoAsscUptime		1.3.6.1.4.1.388.6.3.32.1.15
The number of seconds since the MU last associated. Value is zero if the MU is not associated and was aged-out.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoTktExp		1.3.6.1.4.1.388.6.3.32.1.16
The number of seconds before the security ticket expiration.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoUserName		1.3.6.1.4.1.388.6.3.32.1.17
User name this MU may have for loging processing, if available.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoPktTx		1.3.6.1.4.1.388.6.3.32.1.18
This is sum of all good packets sent from different transmit speed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoPktRx		1.3.6.1.4.1.388.6.3.32.1.19
This is sum of all good packets received from different transmit speed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoBytesTx		1.3.6.1.4.1.388.6.3.32.1.20
Number of bytes sent out.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoBytesRx		1.3.6.1.4.1.388.6.3.32.1.21
Number of bytes received.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoLastAct		1.3.6.1.4.1.388.6.3.32.1.22
Number of seconds since the last MU activity.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoVlan		1.3.6.1.4.1.388.6.3.32.1.23
Value of 0, if not in used. Otherwise it's the VLAN ID.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ccMUInfoAuthState		1.3.6.1.4.1.388.6.3.32.1.24
Informs whether the MU is authenticated or not
Status: current	Access: read-only
OBJECT-TYPE
	AuthState

ccMUInfoAuthMethod		1.3.6.1.4.1.388.6.3.32.1.25
The authentication method being used by the MU.
Status: current	Access: read-only
OBJECT-TYPE
	AuthMethod

ccMUInfoEncrMethod		1.3.6.1.4.1.388.6.3.32.1.26
The Unicast encryption type being used by the MU.
Status: current	Access: read-only
OBJECT-TYPE
	EncrType

ccMUInfoBCMCEncrType		1.3.6.1.4.1.388.6.3.32.1.27
The BroadCast encryption type being used by the MU.
Status: current	Access: read-only
OBJECT-TYPE
	EncrType

ccMUInfoRoamCount		1.3.6.1.4.1.388.6.3.32.1.28
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccACLObjects		1.3.6.1.4.1.388.6.3.33
OBJECT IDENTIFIER

ccACLItemsTable		1.3.6.1.4.1.388.6.3.33.2
A table for individual entries per ACL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcACLItemsEntry

ccACLItemsEntry		1.3.6.1.4.1.388.6.3.33.2.1
An ACL Item object entry. The instances in this table are the individual ACL entries within each ACL object
Status: current	Access: not-accessible
OBJECT-TYPE
	CcACLItemsEntry

ccACLItemIndex		1.3.6.1.4.1.388.6.3.33.2.1.1
The index of this specific entry per ACL
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4096

ccACLItem		1.3.6.1.4.1.388.6.3.33.2.1.2
The individual ACL entry. The format of the string returned is
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

ccWVPNConfigure		1.3.6.1.4.1.388.6.3.34
OBJECT IDENTIFIER

wvpnGeneralSettings		1.3.6.1.4.1.388.6.3.34.1
OBJECT IDENTIFIER

wvpnServerEnable		1.3.6.1.4.1.388.6.3.34.1.1
This is a Boolean variable. If set to true, the WVPN server will be enabled. This is a WRITE-ONLY value. To enable the WVPN server, use a MIB instance of 0 and write a dummy value of 1 to write to this variable. Use 'wvpnStatus' to query the current state. Note:If vpnsupport is not enabled then the walk over this table will not return anything and the set operation over any OID under ccWVPNConfigure will return an error message- No creation.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

wvpnServerDisable		1.3.6.1.4.1.388.6.3.34.1.2
This is a Boolean variable. If set to true, the WVPN server will be disabled. This is a WRITE-ONLY value. To disable the WVPN server, use a MIB instance of 0 and write a dummy value of 1 to write to this variable. Use 'wvpnStatus' to query the current state.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

wvpnServerRestart		1.3.6.1.4.1.388.6.3.34.1.3
This is a Boolean variable. If set to true, the WVPN server will be re-started. Setting to true is the only option allowed. This is a WRITE-ONLY value. To restart the WVPN server, use a MIB instance of 0 and write a dummy value of 1 to write to this variable. Use 'wvpnStatus' to query the current state.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

wvpnIpAddress		1.3.6.1.4.1.388.6.3.34.1.4
The IP address of the WVPN server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..120)

wvpnPort		1.3.6.1.4.1.388.6.3.34.1.5
The port number of the WVPN server. Default value is 9102.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1024..65535

wvpnUnusedTimeout		1.3.6.1.4.1.388.6.3.34.1.6
The timeout value (seconds) for any idle WVPN session.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

wvpnStatus		1.3.6.1.4.1.388.6.3.34.1.7
The current status of the WVPN server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

dosEnable		1.3.6.1.4.1.388.6.3.34.1.8
This is a Boolean variable to allow use of tiny reliable UDP.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dosPort		1.3.6.1.4.1.388.6.3.34.1.9
The reliable UDP port number. Default value is 9103.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1024..65535

clientKeepAlive		1.3.6.1.4.1.388.6.3.34.1.10
This parameter controls the keep alive functionality that sends echo requests each period when no data has passed through the session. If the WVPN server does not receive any answers on two, subsequently sent, echos, the client socket will be torn down. However, the actual session is still there and is controlled by the wvpnUnusedTimeout parameter. Output is in Hour:Minute:Second format. Valid input values are: 1 to 65535 (in seconds)
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

vpnLicenseMax		1.3.6.1.4.1.388.6.3.34.1.11
The maximum number of VPN sessions allowed with the current licensing.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

vpnLicenseInUse		1.3.6.1.4.1.388.6.3.34.1.12
The current number of VPN sessions actually in use.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

wvpnWtlsSettings		1.3.6.1.4.1.388.6.3.34.2
OBJECT IDENTIFIER

maxClientRsaKeySize		1.3.6.1.4.1.388.6.3.34.2.1
The maximum number of bits that the client certificate's public key is allowed to be. If the server receives a client certificate and this condition is not true, the client's socket will be closed. Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360. Note that the MAX value cannot be less than the MIN value which is defined by minClientRsaKeySize.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	512..15360

minClientRsaKeySize		1.3.6.1.4.1.388.6.3.34.2.2
The minimum number of bits that the client certificate's public key is allowed to be. If the server receives a client certificate and this condition is not true, the client's socket will be closed. Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360. Note that the MIN value cannot be greater than the MAX value which is defined by maxClientRsaKeySize.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	512..15360

maxRsaKeySize		1.3.6.1.4.1.388.6.3.34.2.3
The maximum number of bits that the server certificate's key is allowed to be. If a server certificate is used that does not fulfill this condition, the server is unusable. Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360. Note that the MAX value cannot be less than the MIN value which is defined by minRsaKeySize.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	512..15360

minRsaKeySize		1.3.6.1.4.1.388.6.3.34.2.4
The minimum number of bits that the server certificate's key is allowed to be. If a server certificate is used that does not fulfill this condition, the server is unusable. Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360. Note that the MIN value cannot be greater than the MAX value which is defined by maxRsaKeySize.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	512..15360

cipher		1.3.6.1.4.1.388.6.3.34.2.5
A cipher for encrypting messages sent over the VPN channel. Can be one of the following values: AES256, AES192, AES128, 3DES, DES56. Default value is AES128.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..10)

mac		1.3.6.1.4.1.388.6.3.34.2.6
A Message Authentication Code (MAC) algorithm for verifying integrity of the messages sent over the VPN. Can be one of the following values: MD5_128, MD5_80, MD5_40, SHA_512, SHA_384, SHA_256, SHA_160, SHA_80, SHA_40, NO_MAC. Default value is SHA_256.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..10)

requireClientCertificate		1.3.6.1.4.1.388.6.3.34.2.7
This is a Boolean variable. WVPN server will request client to present a certificate if the value is set to true.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

keyRefresh		1.3.6.1.4.1.388.6.3.34.2.8
WTLS key refresh rate. The parties will refresh the session key after each 2^N (2 to the Nth power) exchanged packets, where N is the key refresh rate value. If N is 0, the key is refreshed after each packet
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..31

wantedFipsMode		1.3.6.1.4.1.388.6.3.34.2.9
If set to true, only FIPS 140-2 compliant cryptographic algorithms are used to establish a VPN session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

securityMode		1.3.6.1.4.1.388.6.3.34.2.10
The current securityMode. Value can be customSecurity or defaultSecurity. Default security mode is defaultSecurity.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

serverNumber		1.3.6.1.4.1.388.6.3.34.2.11
A server number must be between 1 and 15. This number is only relevant if there is a cluster of servers.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

handshakeTimeout		1.3.6.1.4.1.388.6.3.34.2.12
The number of seconds that the WVPN server allows a client to perform the whole WTLS handshake. If it times out, the client socket will be closed. Default value is 90 seconds. The valid range of Hand shake timeout is 1 to 10000 (in seconds).
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

allowSessionResume		1.3.6.1.4.1.388.6.3.34.2.13
This is a Boolean variable. If set to true, the WVPN server allows a client to do a session resume (i.e., a secure abbreviated handshake). If set to false, then only full handshakes are allowed.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wvpnAuthServerSettings		1.3.6.1.4.1.388.6.3.34.3
OBJECT IDENTIFIER

useSimpleAuthentication		1.3.6.1.4.1.388.6.3.34.3.1
Specify whether Simple Authentication is used or not. Value could be true(1) or false(2).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

useRadiusAuthentication		1.3.6.1.4.1.388.6.3.34.3.2
This is a Boolean variable. If set to true, RADIUS Authentication will be enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

useLdapAuthentication		1.3.6.1.4.1.388.6.3.34.3.3
This is a Boolean variable. If set to true, LDAP Authentication will be enabled. This feature is not implemented.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

useLocalDatabaseAuthentication		1.3.6.1.4.1.388.6.3.34.3.4
This is a Boolean variable. If set to true, Local Database Authentication will be enabled. This feature is not implemented.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

simpleAuthentication		1.3.6.1.4.1.388.6.3.34.3.5
OBJECT IDENTIFIER

simpleAuthUserName		1.3.6.1.4.1.388.6.3.34.3.5.1
The Simple Authentication user name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

simpleAuthPassword		1.3.6.1.4.1.388.6.3.34.3.5.2
The Simple Authentication user password.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

simpleAuthDomain		1.3.6.1.4.1.388.6.3.34.3.5.3
The Simple Authentication domain.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

wvpnRadiusAuthentication		1.3.6.1.4.1.388.6.3.34.3.6
OBJECT IDENTIFIER

radiusAuthPrimaryServer		1.3.6.1.4.1.388.6.3.34.3.6.1
OBJECT IDENTIFIER

radiusAuthPrimaryHost		1.3.6.1.4.1.388.6.3.34.3.6.1.1
The host name or IP address of the primary RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

radiusAuthPrimaryPort		1.3.6.1.4.1.388.6.3.34.3.6.1.2
The UDP port the client is using to send requests to the primary RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

radiusAuthPrimaryMaxRetries		1.3.6.1.4.1.388.6.3.34.3.6.1.3
The maximum number of times a client is allowed to try authenticating with the primary RADIUS server. Valid input values are from 1 to 10.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

radiusAuthPrimaryTimeOut		1.3.6.1.4.1.388.6.3.34.3.6.1.4
The number of seconds in between retries to the primary RADIUS server. Valid input values are from 5 to 20.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..20

radiusAuthPrimaryUserPassword		1.3.6.1.4.1.388.6.3.34.3.6.1.5
Some RADIUS servers require a user password to be set even though no password is required. If set, the WVPN server will send this password to the RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

radiusAuthPrimarySecret		1.3.6.1.4.1.388.6.3.34.3.6.1.6
The value used to encrypt RADIUS traffic to and from the RADIUS server. A secret shared between the RADIUS server and the WVPN server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

radiusAuthSecondaryServer		1.3.6.1.4.1.388.6.3.34.3.6.2
OBJECT IDENTIFIER

radiusAuthSecondaryHost		1.3.6.1.4.1.388.6.3.34.3.6.2.1
The host name or IP address of the secondary RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..200)

radiusAuthSecondaryPort		1.3.6.1.4.1.388.6.3.34.3.6.2.2
The UDP port the client is using to send requests to the secondary RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

radiusAuthSecondaryMaxRetries		1.3.6.1.4.1.388.6.3.34.3.6.2.3
The maximum number of times a client is allowed to try authenticating with the secondary RADIUS server. Valid input values are from 1 to 10.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

radiusAuthSecondaryTimeOut		1.3.6.1.4.1.388.6.3.34.3.6.2.4
The number of seconds in between retries to the secondary RADIUS server. Valid input values are from 5 to 20
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..20

radiusAuthSecondaryUserPassword		1.3.6.1.4.1.388.6.3.34.3.6.2.5
Some RADIUS servers require a user password to be set even though no password is required. If set, the WVPN server will send this password to the RADIUS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

radiusAuthSecondarySecret		1.3.6.1.4.1.388.6.3.34.3.6.2.6
The value used to encrypt RADIUS traffic to and from the RADIUS server. A secret shared between the RADIUS server and the WVPN server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

wvpnIpPoolsSettings		1.3.6.1.4.1.388.6.3.34.4
OBJECT IDENTIFIER

wvpnAddIpPoolObj		1.3.6.1.4.1.388.6.3.34.4.1
Add an IP Pool object to the wvpnIpPoolsTable. Input string format: . Max length of pool_name is 32 bytes, and begin_ip and end_ip are IP Addresses. Characters not allowed in the pool_name: ` @ # $ & ( ) | = \ ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..100)

wvpnRemIpPoolObj		1.3.6.1.4.1.388.6.3.34.4.2
Remove an IP Pool object from wvpnIpPoolsTable. Input string format: . Max length of pool_name is 32 bytes. Characters not allowed in the IPpool_name: ` @ # $ & ( ) | = \ ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnAddIpPoolRange		1.3.6.1.4.1.388.6.3.34.4.3
Add an IP address range to an IP Pool object in the wvpnIpPoolsTable. Input string format: . Max length of pool_name is 32 bytes, and begin_ip and end_ip are IP Addresses. Characters not allowed in the IPpool_name: ` @ # $ & ( ) | = \ ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..100)

wvpnRemIpPoolRange		1.3.6.1.4.1.388.6.3.34.4.4
Remove an IP address range from an IP Pool object in the wvpnIpPoolsTable. Input string format: . Max length of pool_name is 32 bytes, and begin_ip and end_ip are IP Addresses. Characters not allowed in the IPpool_name: ` @ # $ & ( ) | = \ ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

useDhcpGateway		1.3.6.1.4.1.388.6.3.34.4.5
This is a Boolean variable. If set to true, DHCP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wvpnIpPoolsTable		1.3.6.1.4.1.388.6.3.34.4.6
The IP Pools Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WvpnIpPoolsEntry

wvpnIpPoolsEntry		1.3.6.1.4.1.388.6.3.34.4.6.1
An IP Pool object.
Status: current	Access: not-accessible
OBJECT-TYPE
	WvpnIpPoolsEntry

wvpnIpPoolIndex		1.3.6.1.4.1.388.6.3.34.4.6.1.1
An integer index for the wvpnIpPoolsTable to access an IP Pool object.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..100

clientIpPoolName		1.3.6.1.4.1.388.6.3.34.4.6.1.2
This is the client's IP Pool name. Max length of pool name is 32 bytes. Characters not allowed in the pool name: ` @ # $ & ( ) | = \ ; double-quote ' < > / sp
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

clientNetMask		1.3.6.1.4.1.388.6.3.34.4.6.1.3
clientNetMask
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

clientDhcpServerAddress		1.3.6.1.4.1.388.6.3.34.4.6.1.4
This is the client's DHCP server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

clientDefaultGatewayAddress		1.3.6.1.4.1.388.6.3.34.4.6.1.5
This is the client's default gateway address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

clientDnsAddress		1.3.6.1.4.1.388.6.3.34.4.6.1.6
This is the client's DNS server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

clientWinsAddress		1.3.6.1.4.1.388.6.3.34.4.6.1.7
This is the client's WINS address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

clientDomainName		1.3.6.1.4.1.388.6.3.34.4.6.1.8
This is the client's domain name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

clientNetBiosNodeType		1.3.6.1.4.1.388.6.3.34.4.6.1.9
This is the client's Net Bios Node type.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

clientDhcpLeaseTime		1.3.6.1.4.1.388.6.3.34.4.6.1.10
This is currently not supported in this version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

reuseAddrTime		1.3.6.1.4.1.388.6.3.34.4.6.1.11
When client's IP returns to DHCP IP pool, this is the amount of time required before IP can be reused. Input required in seconds. Output also is in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2147483647

ipRangeCount		1.3.6.1.4.1.388.6.3.34.4.6.1.12
The total number of IP address ranges that exist for a particular IP pool object.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

clientIpRanges		1.3.6.1.4.1.388.6.3.34.4.6.1.13
List of client's IP address ranges. Ranges are separated by a comma, and the start and end of each range is separated by a hyphen.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

wvpnIpPoolsCount		1.3.6.1.4.1.388.6.3.34.4.7
Total size of the IP Pool object list.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wvpnIpPoolsNames		1.3.6.1.4.1.388.6.3.34.4.8
Comma-separated list of client IP Pool names.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..200)

wvpnCertificateSettings		1.3.6.1.4.1.388.6.3.34.5
OBJECT IDENTIFIER

wvpnServerCertificateTable		1.3.6.1.4.1.388.6.3.34.5.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WvpnServerCertificateEntry

wvpnServerCertificateEntry		1.3.6.1.4.1.388.6.3.34.5.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	WvpnServerCertificateEntry

wvpnCertIndex		1.3.6.1.4.1.388.6.3.34.5.1.1.1
An integer index for wvpnServerCertificateTable to access a certificate.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..100

userName		1.3.6.1.4.1.388.6.3.34.5.1.1.2
The name that identifies the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

serialNumber		1.3.6.1.4.1.388.6.3.34.5.1.1.3
The serial number of the certificate.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

subject		1.3.6.1.4.1.388.6.3.34.5.1.1.4
The subject of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

version		1.3.6.1.4.1.388.6.3.34.5.1.1.5
The version of the certificate format.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

issuer		1.3.6.1.4.1.388.6.3.34.5.1.1.6
The issuer of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

keyLength		1.3.6.1.4.1.388.6.3.34.5.1.1.7
The key length of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	512..4096

validFrom		1.3.6.1.4.1.388.6.3.34.5.1.1.8
The start validity date of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

validTo		1.3.6.1.4.1.388.6.3.34.5.1.1.9
The expiry date of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

certificate		1.3.6.1.4.1.388.6.3.34.5.1.1.10
Server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..120)

binary		1.3.6.1.4.1.388.6.3.34.5.1.1.11
The certificate in hex binary notation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

fingerPrint		1.3.6.1.4.1.388.6.3.34.5.1.1.12
A hash over the entire certificate that is statistically unique. The hash algorithm is SHA-1, and the binary hash is converted to hex encoded representation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

authFingerPrint		1.3.6.1.4.1.388.6.3.34.5.1.1.13
This is not supported in the current version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

serverCertCount		1.3.6.1.4.1.388.6.3.34.5.2
The total number of end users in the wvpnServerCertificateTable. The value is either 0 or 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..1

serverCertUserNames		1.3.6.1.4.1.388.6.3.34.5.3
A list of certificate user names.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaCertificateTable		1.3.6.1.4.1.388.6.3.34.5.4
A table of WVPN CA certificates.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WvpnCaCertificateEntry

wvpnCaCertificateEntry		1.3.6.1.4.1.388.6.3.34.5.4.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	WvpnCaCertificateEntry

wvpnCaCertIndex		1.3.6.1.4.1.388.6.3.34.5.4.1.1
An integer index for wvpnCaCertificateTable to access a CA certificate.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

wvpnCaSerialNumber		1.3.6.1.4.1.388.6.3.34.5.4.1.2
The serial number of the CA certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaSubject		1.3.6.1.4.1.388.6.3.34.5.4.1.3
The subject of the CA certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaVersion		1.3.6.1.4.1.388.6.3.34.5.4.1.4
The version of the CA certificate format.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

wvpnCaIssuer		1.3.6.1.4.1.388.6.3.34.5.4.1.5
The issuer of the CA certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaKeyLength		1.3.6.1.4.1.388.6.3.34.5.4.1.6
The key length of the CA certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaValidFrom		1.3.6.1.4.1.388.6.3.34.5.4.1.7
The start validity date of the CA certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaValidTo		1.3.6.1.4.1.388.6.3.34.5.4.1.8
The expiry date of the CA certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnCaBinary		1.3.6.1.4.1.388.6.3.34.5.4.1.9
The CA certificate in Hex binary notation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

wvpnCaFingerPrint		1.3.6.1.4.1.388.6.3.34.5.4.1.10
A hash over the entire certificate that is statistically unique. The hash algorithm is SHA-1, and the binary hash is converted to hex encoded representation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

wvpnCaAuthFingerPrint		1.3.6.1.4.1.388.6.3.34.5.4.1.11
This is not supported in the current version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

caCertCount		1.3.6.1.4.1.388.6.3.34.5.5
The total number of certificate serial numbers in the wvpnCaCertificateTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..1000

certSerialNumbers		1.3.6.1.4.1.388.6.3.34.5.6
A list of certificate serial numbers. Serial numbers are comma delimited.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..150)

importServerCert		1.3.6.1.4.1.388.6.3.34.5.7
Import a server certificate that is already residing on the local machine. Input String format: serverCertFile must be an absolute path to the file. Furthermore, the certificate file must be specified if the serverCertFile does not have an embedded certificate. certFileName is optional, but if specified, it must be an absolute path to the file. Characters not allowed in both serverCertFile and certFileName: ` @ # $ & | = ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..150)

removeServerCert		1.3.6.1.4.1.388.6.3.34.5.8
Remove a server certificate from the wvpnServerCertificateTable. Input string format: Characters not allowed in UserName: ` @ # $ & | = ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

importCaCert		1.3.6.1.4.1.388.6.3.34.5.9
Import a CA certificate that is already residing on the local machine. Input String format: caCertFile must be an absolute path to the file. Characters not allowed in caCertFile: ` @ # $ & | = ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

removeCaCert		1.3.6.1.4.1.388.6.3.34.5.10
Remove a CA certificate at a given index from the wvpnCaCertificateTable. This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..1000

importTftpServerCert		1.3.6.1.4.1.388.6.3.34.5.11
Import a server certificate from a remote machine via TFTP. Input String format: certFileName is optional, but if specified, it must be an absolute path to the file. serverCertFile must be an absolute path to the file. The certificate file must be specified if the serverCertFile does not have an embedded certificate. Characters not allowed in both serverCertFile and certFileName: ` @ # $ & | = ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..150)

importTftpCaCert		1.3.6.1.4.1.388.6.3.34.5.12
Import a CA certificate from a remote machine via TFTP. Input String format: caCertFile must be an absolute path to the file. Characters not allowed in caCertFile: ` @ # $ & | = ; double-quote ' < > / sp This is a WRITE-ONLY value.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..150)

dirCert		1.3.6.1.4.1.388.6.3.34.5.13
Dumps a list of certificate files. This diagnostic tool lists the certificate files left over from upload operations - it does not display or affect certificates installed in the WVPN server. The files are given in a comma-separated list. The 'dumpCert' object can be used to examine any of the listed certificate files in further detail. This is a READ-ONLY value.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..1000)

dumpCert		1.3.6.1.4.1.388.6.3.34.5.14
Dumps the contents of a certificate file. This diagnostic tool dumps the certificate files left over from upload operations - it does not dump or affect certificates installed in the WVPN server. Using this variable is a two-step process: first a SET request must be used to feed in the name of the certificate file to be decoded, then a GET request will retrieve the decoded contents of the certificate file. The input for the SET command is the relative path of a file containing a certificate. Example: wtls_ca.cer The certificate file must be in the internal upload directory (/upload/wvpn).
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

wvpnDDNSSettings		1.3.6.1.4.1.388.6.3.34.6
OBJECT IDENTIFIER

clearClientDNS		1.3.6.1.4.1.388.6.3.34.6.1
Remove all client IP addresses registered in the DNS server by the WVPN server. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

updateClientDNS		1.3.6.1.4.1.388.6.3.34.6.2
Re-register in the DNS server all client IP addresses owned by the WVPN server. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

addDNSAddr		1.3.6.1.4.1.388.6.3.34.6.3
Add a DNS server IP address. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

deleteDNSAddr		1.3.6.1.4.1.388.6.3.34.6.4
Remove a DNS server IP address. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

enable		1.3.6.1.4.1.388.6.3.34.6.5
Enable or disable DDNS service, or query the DDNS status. To get or set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ttl		1.3.6.1.4.1.388.6.3.34.6.6
The time-to-live (ttl) value for a resource record stored in the DNS server. TTL is expressed as a percentage of the unused session timeout. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

forwardZone		1.3.6.1.4.1.388.6.3.34.6.7
The forward zone name of the DNS server. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

reverseZone		1.3.6.1.4.1.388.6.3.34.6.8
The reverse zone name of the DNS server. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

clientNameString		1.3.6.1.4.1.388.6.3.34.6.9
A format string used by the WVPN server to construct client FQDN. To set it, use a MIB instance value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..120)

wvpnDDNSAddressTable		1.3.6.1.4.1.388.6.3.34.6.10
A table of DDNS IP addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WvpnDDNSAddressEntry

wvpnDDNSAddressEntry		1.3.6.1.4.1.388.6.3.34.6.10.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	WvpnDDNSAddressEntry

wvpnDDNSAddressIndex		1.3.6.1.4.1.388.6.3.34.6.10.1.1
An integer index for the wvpnDDNSAddressTable to access a DNS server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

wvpnDDNSipAddress		1.3.6.1.4.1.388.6.3.34.6.10.1.2
The IP address of the DNS server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cleanupTimeout		1.3.6.1.4.1.388.6.3.34.6.11
Duration of cleanup timeout in sec.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..10000

reverseZoneList		1.3.6.1.4.1.388.6.3.34.6.12
List reverse zones of the DNS server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

reverseZoneAdd		1.3.6.1.4.1.388.6.3.34.6.13
Add new reverse zones for the DNS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

reverseZoneDel		1.3.6.1.4.1.388.6.3.34.6.14
Delete a reverse zone from a list of reverse zones of the DNS Server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

wvpnRuntimeStats		1.3.6.1.4.1.388.6.3.34.7
OBJECT IDENTIFIER

wvpnSessionTable		1.3.6.1.4.1.388.6.3.34.7.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WvpnSessionEntry

wvpnSessionEntry		1.3.6.1.4.1.388.6.3.34.7.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	WvpnSessionEntry

wvpnSessionIndex		1.3.6.1.4.1.388.6.3.34.7.1.1.1
An integer index for wvpnSessionTable to access a VPN session
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4096

wvpnSessionId		1.3.6.1.4.1.388.6.3.34.7.1.1.2
The internal ID number by which the WVPN server identifies the session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnVpnIp		1.3.6.1.4.1.388.6.3.34.7.1.1.3
The private IP address assigned to the VPN client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnRealIp		1.3.6.1.4.1.388.6.3.34.7.1.1.4
The public IP address of the client prior to connecting to the VPN server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnLoginTime		1.3.6.1.4.1.388.6.3.34.7.1.1.5
The login time of the client
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnRoamTime		1.3.6.1.4.1.388.6.3.34.7.1.1.6
Description.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnLastActive		1.3.6.1.4.1.388.6.3.34.7.1.1.7
The last time that the client was active.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnPoolName		1.3.6.1.4.1.388.6.3.34.7.1.1.8
The IP Pool from which the client got its' VPN IP address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnMacAddr		1.3.6.1.4.1.388.6.3.34.7.1.1.9
The MAC address of the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

wvpnSessionCount		1.3.6.1.4.1.388.6.3.34.7.2
The number of VPN sessions. This is a READ-ONLY value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wvpnRefreshSession		1.3.6.1.4.1.388.6.3.34.7.3
Refreshes the VPN session info. Returns a blank string This is a READ-ONLY value.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..1000)

wvpnKillSession		1.3.6.1.4.1.388.6.3.34.7.4
Kills the VPN session specified by the written index number. For Example: setting this value to 4 would kill the fourth VPN session in the current list. This is a WRITE-ONLY value. Reading it will always return 0.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

symbolCCPerformance		1.3.6.1.4.1.388.6.4
OBJECT IDENTIFIER

symbolCCFault		1.3.6.1.4.1.388.6.5
OBJECT IDENTIFIER

ccTargetObjects		1.3.6.1.4.1.388.6.5.1
OBJECT IDENTIFIER

ccTargetTrapString		1.3.6.1.4.1.388.6.5.1.1
String that varies based on the trap that is being sent.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString	Size(0..512)

ccTargetAddrTable		1.3.6.1.4.1.388.6.5.1.2
A table of transport addresses to be used in the generation of SNMP messages. Note: After make changes for this table objects, in order to make those modifications effective immediately, there are two operations which should be performed in the following order: 1. SET ccSnmpOpers object to 3 (Update Configuration). 2. SET ccSNMPFlag object to 'true'. Both ccSnmpOpers and ccSNMPFlag objects are under ccSysCfg tree.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcTargetAddrEntry

ccTargetAddrEntry		1.3.6.1.4.1.388.6.5.1.2.1
A transport address to be used in the generation of SNMP operations. Entries in the ccTargetAddrTable are created and deleted using the ccTargetAddrRowStatus object.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcTargetAddrEntry

ccTargetAddrName		1.3.6.1.4.1.388.6.5.1.2.1.1
The locally arbitrary, but unique identifier associated with this ccTargetAddrEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

ccTargetAddrSecName		1.3.6.1.4.1.388.6.5.1.2.1.2
This object contains a target(such as a snmp manager) secName.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

ccTargetAddrHost		1.3.6.1.4.1.388.6.5.1.2.1.3
This object contains a target(such as a snmp manager) ip address.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

ccTargetAddrCommunity		1.3.6.1.4.1.388.6.5.1.2.1.4
This object contains a community name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

ccTargetAddrPort		1.3.6.1.4.1.388.6.5.1.2.1.5
This object specifies a port number for remote manager receiving the trap.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..20000

ccTargetAddrStorageType		1.3.6.1.4.1.388.6.5.1.2.1.6
The storage type for this conceptual row.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

ccTargetAddrRowStatus		1.3.6.1.4.1.388.6.5.1.2.1.7
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the ccTargetAddrRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding instances of ccTargetAddrTDomain, ccTargetAddrTAddress, and ccTargetAddrParams have all been set. The following objects may not be modified while the value of this object is active(1): - ccTargetAddrTDomain - ccTargetAddrTAddress An attempt to set these objects while the value of ccTargetAddrRowStatus is active(1) will result in an inconsistentValue error. Note:While destroying a row set the manager's re-transmission value as zero as the agent is re-started and there is no response from agent fot this request and the manager keeps on re-transmitting resulting into multiple row deletion depending on the value of re-transmission.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

ccTargetAddrOption		1.3.6.1.4.1.388.6.5.1.2.1.8
The write option for this conceptual row. com2sec(0), for setting up remote manager address. trap2sink(1), for setting up V2c trap target address. trapsink(2), for setting up V1 trap target address. com2secAndtrap2sink(3), write the row record to both , and section in snmpd.conf. all(4)
Status: current	Access: read-create
OBJECT-TYPE
	TargetOptions

ccTrapInfos		1.3.6.1.4.1.388.6.5.2
OBJECT IDENTIFIER

ccTrapInfoEnableTrap		1.3.6.1.4.1.388.6.5.2.1
(true) implies that the traps subsystem is enabled. (false) implies that the traps subsystem is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccTrapInfoMaxNumSendOneTrap		1.3.6.1.4.1.388.6.5.2.2
The maximum number of times for sending one trap over the interval specified in ccTrapInfoInterval.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

ccTrapInfoInterval		1.3.6.1.4.1.388.6.5.2.3
No more than ccTrapInfoMaxNumSendOneTrap traps of same kind may be sent within this interval(in seconds).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..120

ccTrapInfoAclViolation		1.3.6.1.4.1.388.6.5.2.4
Enable(true)/Disable(false) this trap. MU assoc failed [ACL violation]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoDenyAdoption		1.3.6.1.4.1.388.6.5.2.5
Enable(true)/Disable(false) this trap. AP adopt failure [general]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoAPMUMaxExceed		1.3.6.1.4.1.388.6.5.2.6
Enable(true)/Disable(false) this trap. AP max MU count reached
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoWLANMUMaxExceed		1.3.6.1.4.1.388.6.5.2.7
Enable(true)/Disable(false) this trap. WLAN max MU count reached
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoApDetected		1.3.6.1.4.1.388.6.5.2.8
Enable(true)/Disable(false) this trap. AP detected
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoApAdopted		1.3.6.1.4.1.388.6.5.2.9
Enable(true)/Disable(false) this trap. AP status [adopted]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoApReset		1.3.6.1.4.1.388.6.5.2.10
Enable(true)/Disable(false) this trap. AP status [reset]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoApUnavailable		1.3.6.1.4.1.388.6.5.2.11
Enable(true)/Disable(false) this trap. AP status [offline]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoKDCUserAuthFail		1.3.6.1.4.1.388.6.5.2.13
Enable(true)/Disable(false) this trap. MU Kerberos auth failed
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoRadiusAuthFail		1.3.6.1.4.1.388.6.5.2.14
Enable(true)/Disable(false) this trap. Mgt user auth failed [radius]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoLowFlashSpace		1.3.6.1.4.1.388.6.5.2.16
Enable(true)/Disable(false) this trap. Low flash space on switch
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoNicDropping		1.3.6.1.4.1.388.6.5.2.17
Enable(true)/Disable(false) this trap. Ether port disconnected
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoApAlert		1.3.6.1.4.1.388.6.5.2.19
Enable(true)/Disable(false) this trap. AP status [alert]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoUserAuthFail		1.3.6.1.4.1.388.6.5.2.20
Enable(true)/Disable(false) this trap. Mgt user auth rejected
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoHsbPrimaryNoHeartbeat		1.3.6.1.4.1.388.6.5.2.21
Enable(true)/Disable(false) this trap. Primary lost heartbeat
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoHsbStandbyEntersFailover		1.3.6.1.4.1.388.6.5.2.22
Enable(true)/Disable(false) this trap. Standby active
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoPrimaryFailedResetting		1.3.6.1.4.1.388.6.5.2.23
Enable(true)/Disable(false) this trap. Primary internal failure [reset]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoKDCPropagationFail		1.3.6.1.4.1.388.6.5.2.25
Enable(true)/Disable(false) this trap. KDC propagation failure
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoHighDecryptFail		1.3.6.1.4.1.388.6.5.2.26
Enable(true)/Disable(false) this trap. MU TKIP [decrypt failure]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoHighReplyFail		1.3.6.1.4.1.388.6.5.2.27
Enable(true)/Disable(false) this trap. MU TKIP [replay failure]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoTKIPMICFail		1.3.6.1.4.1.388.6.5.2.28
Enable(true)/Disable(false) this trap. MU TKIP [MIC error]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoWPACounterMeasureStart		1.3.6.1.4.1.388.6.5.2.29
Enable(true)/Disable(false) this trap. WPA counter-measures [active]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

licenseChangedControl		1.3.6.1.4.1.388.6.5.2.31
Enable(true)/Disable(false) this trap. License number change
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

clockChangedControl		1.3.6.1.4.1.388.6.5.2.32
Enable(true)/Disable(false) this trap. Clock change
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

pktDiscWrongNICControl		1.3.6.1.4.1.388.6.5.2.33
Enable(true)/Disable(false) this trap. Packet discard [wrong NIC]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

pktDiscWrongVLANControl		1.3.6.1.4.1.388.6.5.2.34
Enable(true)/Disable(false) this trap. Packet discard [wrong VLAN]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apAdoptFailPolControl		1.3.6.1.4.1.388.6.5.2.35
Enable(true)/Disable(false) this trap. AP adopt failure [policy disallow]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apAdoptFailACLControl		1.3.6.1.4.1.388.6.5.2.36
Enable(true)/Disable(false) this trap. AP adopt failure [acl disallow]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apAdoptFailLimitControl		1.3.6.1.4.1.388.6.5.2.37
Enable(true)/Disable(false) this trap. AP adopt failure [limit exceeded]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apAdoptFailLicControl		1.3.6.1.4.1.388.6.5.2.38
Enable(true)/Disable(false) this trap. AP adopt failure [license disallow]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apAdoptFailNoImgControl		1.3.6.1.4.1.388.6.5.2.39
Enable(true)/Disable(false) this trap. AP adopt failure [no image]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apCfgFailESSControl		1.3.6.1.4.1.388.6.5.2.40
Enable(true)/Disable(false) this trap. AP config failed [wrong ESS]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

devDropInfoMsgControl		1.3.6.1.4.1.388.6.5.2.41
Enable(true)/Disable(false) this trap. Device msg dropped [info]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

devdropLoadmeMsgControl		1.3.6.1.4.1.388.6.5.2.42
Enable(true)/Disable(false) this trap. Device msg dropped [loadme]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

etherConnectControl		1.3.6.1.4.1.388.6.5.2.43
Enable(true)/Disable(false) this trap. Ether port connected
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muAssocFailControl		1.3.6.1.4.1.388.6.5.2.44
Enable(true)/Disable(false) this trap. MU assoc failed
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muAssocOKControl		1.3.6.1.4.1.388.6.5.2.45
Enable(true)/Disable(false) this trap. MU status [associated]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muRoamedControl		1.3.6.1.4.1.388.6.5.2.46
Enable(true)/Disable(false) this trap. MU status [roamed]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muDisassocControl		1.3.6.1.4.1.388.6.5.2.47
Enable(true)/Disable(false) this trap. MU status [disassociated]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muEAPAuthFailControl		1.3.6.1.4.1.388.6.5.2.48
Enable(true)/Disable(false) this trap. MU EAP auth failed
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muEAPAuthOKControl		1.3.6.1.4.1.388.6.5.2.49
Enable(true)/Disable(false) this trap. MU EAP auth success
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

muKDCAuthOKControl		1.3.6.1.4.1.388.6.5.2.50
Enable(true)/Disable(false) this trap. MU Kerberos auth success
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanAuthOKControl		1.3.6.1.4.1.388.6.5.2.51
Enable(true)/Disable(false) this trap. WLAN auth success
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanAuthFailControl		1.3.6.1.4.1.388.6.5.2.52
Enable(true)/Disable(false) this trap. WLAN auth failed
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

userAuthOKControl		1.3.6.1.4.1.388.6.5.2.53
Enable(true)/Disable(false) this trap. Mgt user auth success [radius]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

radiusSrvTimeoutControl		1.3.6.1.4.1.388.6.5.2.54
Enable(true)/Disable(false) this trap. Radius server timeout
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

kdcPrincAddControl		1.3.6.1.4.1.388.6.5.2.55
Enable(true)/Disable(false) this trap. KDC user [added]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

kdcPrincChgdControl		1.3.6.1.4.1.388.6.5.2.56
Enable(true)/Disable(false) this trap. KDC user [changed]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

kdcPrincDelControl		1.3.6.1.4.1.388.6.5.2.57
Enable(true)/Disable(false) this trap. KDC user [deleted]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

kdcDBReplacedControl		1.3.6.1.4.1.388.6.5.2.58
Enable(true)/Disable(false) this trap. KDC DB replaced
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hsbStdbyAutoRevControl		1.3.6.1.4.1.388.6.5.2.59
Enable(true)/Disable(false) this trap. Standy auto-revert
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hsbPrimAutoRevControl		1.3.6.1.4.1.388.6.5.2.60
Enable(true)/Disable(false) this trap. Primary auto-revert
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acsErrorControl		1.3.6.1.4.1.388.6.5.2.61
Enable(true)/Disable(false) this trap. Auto channel select error
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

eopActiveControl		1.3.6.1.4.1.388.6.5.2.62
Enable(true)/Disable(false) this trap. Emergency Policy [active]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

eopInactiveControl		1.3.6.1.4.1.388.6.5.2.63
Enable(true)/Disable(false) this trap. Emergency Policy [deactivated]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

debugEventControl		1.3.6.1.4.1.388.6.5.2.64
This trap is read only. Miscellaneous debug events
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hsbStartUpControl		1.3.6.1.4.1.388.6.5.2.65
Enable(true)/Disable(false) this trap. HSB Starts Up
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hsbPeerConnectControl		1.3.6.1.4.1.388.6.5.2.66
Enable(true)/Disable(false) this trap. HSB Peer Connect
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccFanAndTempControl		1.3.6.1.4.1.388.6.5.2.67
Enable(true)/Disable(false) this trap. Fan and Temp Notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccAccessChangedControl		1.3.6.1.4.1.388.6.5.2.68
Enable(true)/Disable(false) this trap. Access Changed Notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tpcPowerReducedControl		1.3.6.1.4.1.388.6.5.2.69
Enable(true)/Disable(false) this trap. Radio power is reduced [TPC]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dfsRadarDetectControl		1.3.6.1.4.1.388.6.5.2.70
Enable(true)/Disable(false) this trap. Radar is detected [DFS]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dfsChannelSelectControl		1.3.6.1.4.1.388.6.5.2.71
Enable(true)/Disable(false) this trap. Channel selected to avoid radar [DFS]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dfsChannelSwitchControl		1.3.6.1.4.1.388.6.5.2.72
Enable(true)/Disable(false) this trap. Switch to new channel [DFS]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dfsChannelRevertControl		1.3.6.1.4.1.388.6.5.2.73
Enable(true)/Disable(false) this trap. Revert back to original channel [DFS]
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

radioSuspendControl		1.3.6.1.4.1.388.6.5.2.74
Enable(true)/Disable(false) this trap. Radio is suspended - no available channels
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

radioResumeControl		1.3.6.1.4.1.388.6.5.2.75
Enable(true)/Disable(false) this trap. Radio is resumed
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

radioRandomChannelControl		1.3.6.1.4.1.388.6.5.2.76
Enable(true)/Disable(false) this trap. Radio is moved to random channel
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapNewRogueApControl		1.3.6.1.4.1.388.6.5.2.77
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapNewApprovedApControl		1.3.6.1.4.1.388.6.5.2.78
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoWVPNAlert		1.3.6.1.4.1.388.6.5.2.79
Enable(1)/Disable(2) this trap. This trap is sent when there are any anomalies with the client/server certificates.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoWVPNInfo		1.3.6.1.4.1.388.6.5.2.80
Enable(1)/Disable(2) this trap. This trap is sent when there are any client/server configuration changes or connection establishments.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccTrapInfoRadiusAcct		1.3.6.1.4.1.388.6.5.2.81
Enable(1)/Disable(2) the trap for Radius Accounting Log. This trap is not supported.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccInfoRadiusServerControl		1.3.6.1.4.1.388.6.5.2.82
Enable(1)/Disable(2) this trap.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

configChangeUpdateControl		1.3.6.1.4.1.388.6.5.2.83
Enable(1)/Disable(2) this trap. This trap is sent whenever there is a configuration change in the switch.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tunnelStatusChangedControl		1.3.6.1.4.1.388.6.5.2.84
Enable(1)/Disable(2) this trap. This trap is sent whenever there is a Tuneel Status Change
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tunnelUnknownProtocolControl		1.3.6.1.4.1.388.6.5.2.85
Enable(1)/Disable(2) this trap. This trap is sent whenever there is a non Ip packet received on Tunnel
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSumStatsApControl		1.3.6.1.4.1.388.6.5.2.86
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSumStatsMuControl		1.3.6.1.4.1.388.6.5.2.87
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSumStatsWlanControl		1.3.6.1.4.1.388.6.5.2.88
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSumStatsSwitchControl		1.3.6.1.4.1.388.6.5.2.89
Description.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

sensorConvertControl		1.3.6.1.4.1.388.6.5.2.90
Enable(1)/Disable(2) this trap. This trap is sent when AP is converted to sensor
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

sensorRevertControl		1.3.6.1.4.1.388.6.5.2.91
Enable(1)/Disable(2) this trap. This trap is sent when Sensor is reverted back to AP
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

sensorFailureControl		1.3.6.1.4.1.388.6.5.2.92
Enable(1)/Disable(2) this trap. This trap is sent when Failed to communicate to a sensor
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

sensorOfflineControl		1.3.6.1.4.1.388.6.5.2.93
Enable(1)/Disable(2) this trap. This trap is sent when Sensor is no longer responding to ping
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

symbolCCTraps		1.3.6.1.4.1.388.6.5.3
OBJECT IDENTIFIER

ccTrapLowFlashSpace		1.3.6.1.4.1.388.6.5.3.1
Low flash space on switch This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - sysLowFlashSpace
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapNicDropping		1.3.6.1.4.1.388.6.5.3.3
Ether port disconnected This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - etherDisconnect
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapAPMUMaxExceed		1.3.6.1.4.1.388.6.5.3.6
AP max MU count reached This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apMaxMU
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapWLANMUMaxExceed		1.3.6.1.4.1.388.6.5.3.7
WLAN max MU count reached This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - wlanMaxMUCount
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapAPDetected		1.3.6.1.4.1.388.6.5.3.8
AP detected This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apDetected
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapAPAdopted		1.3.6.1.4.1.388.6.5.3.9
AP status [adopted] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apAdopted
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapAPReset		1.3.6.1.4.1.388.6.5.3.10
AP status [reset] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apReset
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapAPUnavailable		1.3.6.1.4.1.388.6.5.3.11
AP status [offline] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apOffline
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapAPAlert		1.3.6.1.4.1.388.6.5.3.12
AP status [alert] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apAlert
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapUserAuthFail		1.3.6.1.4.1.388.6.5.3.13
Mgt user auth rejected This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - userAuthRejected
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapRadiusAuthFail		1.3.6.1.4.1.388.6.5.3.14
Mgt user auth failed [radius] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - userAuthFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapACLViolation		1.3.6.1.4.1.388.6.5.3.16
MU assoc failed [ACL violation] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muAssocFailACL
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapDenyAPAdoption		1.3.6.1.4.1.388.6.5.3.18
AP adopt failure [general] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apAdoptFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapHsbPrimaryNoHeartbeat		1.3.6.1.4.1.388.6.5.3.20
Primary lost heartbeat This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbPrimHBLoss
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapHsbStandbyEntersFailover		1.3.6.1.4.1.388.6.5.3.21
Standby active This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbFailover
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapHsbPrimaryFailedResetting		1.3.6.1.4.1.388.6.5.3.22
Primary internal failure [reset] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbPrimFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapHsbStandbyFailedResetting		1.3.6.1.4.1.388.6.5.3.23
Standby internal failure [reset] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbStdbyFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapKDCUserAuthFail		1.3.6.1.4.1.388.6.5.3.24
MU Kerberos auth failed This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muKDCAuthFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapKDCPropagationFail		1.3.6.1.4.1.388.6.5.3.25
KDC propagation failure This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - kdcPropFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapHighDecryptFail		1.3.6.1.4.1.388.6.5.3.26
MU TKIP [decrypt failure] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muTKIPDecyptFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapHighReplyFail		1.3.6.1.4.1.388.6.5.3.27
MU TKIP [replay failure] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muTKIPReplayFail
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapTKIPMICFail		1.3.6.1.4.1.388.6.5.3.28
MU TKIP [MIC error] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muTKIPMicError
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapWPACounterMeasureStart		1.3.6.1.4.1.388.6.5.3.29
WPA counter-measures [active] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - wpaCntrMsrAct
Status: current	Access: read-write
NOTIFICATION-TYPE

licenseChanged		1.3.6.1.4.1.388.6.5.3.31
License number change
Status: current	Access: read-write
NOTIFICATION-TYPE

clockChanged		1.3.6.1.4.1.388.6.5.3.32
Clock change
Status: current	Access: read-write
NOTIFICATION-TYPE

pktDiscWrongNIC		1.3.6.1.4.1.388.6.5.3.33
Packet discard [wrong NIC]
Status: current	Access: read-write
NOTIFICATION-TYPE

pktDiscWrongVLAN		1.3.6.1.4.1.388.6.5.3.34
Packet discard [wrong VLAN]
Status: current	Access: read-write
NOTIFICATION-TYPE

apAdoptFailPol		1.3.6.1.4.1.388.6.5.3.35
AP adopt failure [policy disallow]
Status: current	Access: read-write
NOTIFICATION-TYPE

apAdoptFailACL		1.3.6.1.4.1.388.6.5.3.36
AP adopt failure [acl disallow]
Status: current	Access: read-write
NOTIFICATION-TYPE

apAdoptFailLimit		1.3.6.1.4.1.388.6.5.3.37
AP adopt failure [limit exceeded]
Status: current	Access: read-write
NOTIFICATION-TYPE

apAdoptFailLic		1.3.6.1.4.1.388.6.5.3.38
AP adopt failure [license disallow]
Status: current	Access: read-write
NOTIFICATION-TYPE

apAdoptFailNoImg		1.3.6.1.4.1.388.6.5.3.39
AP adopt failure [no image]
Status: current	Access: read-write
NOTIFICATION-TYPE

apCfgFailESS		1.3.6.1.4.1.388.6.5.3.40
AP config failed [wrong ESS]
Status: current	Access: read-write
NOTIFICATION-TYPE

devDropInfoMsg		1.3.6.1.4.1.388.6.5.3.41
Device msg dropped [info]
Status: current	Access: read-write
NOTIFICATION-TYPE

devdropLoadmeMsg		1.3.6.1.4.1.388.6.5.3.42
Device msg dropped [loadme]
Status: current	Access: read-write
NOTIFICATION-TYPE

etherConnect		1.3.6.1.4.1.388.6.5.3.43
Ether port connected
Status: current	Access: read-write
NOTIFICATION-TYPE

muAssocFail		1.3.6.1.4.1.388.6.5.3.44
MU assoc failed
Status: current	Access: read-write
NOTIFICATION-TYPE

muAssocOK		1.3.6.1.4.1.388.6.5.3.45
MU status [associated]
Status: current	Access: read-write
NOTIFICATION-TYPE

muRoamed		1.3.6.1.4.1.388.6.5.3.46
MU status [roamed]
Status: current	Access: read-write
NOTIFICATION-TYPE

muDisassoc		1.3.6.1.4.1.388.6.5.3.47
MU status [disassociated]
Status: current	Access: read-write
NOTIFICATION-TYPE

muEAPAuthFail		1.3.6.1.4.1.388.6.5.3.48
MU EAP auth failed
Status: current	Access: read-write
NOTIFICATION-TYPE

muEAPAuthOK		1.3.6.1.4.1.388.6.5.3.49
MU EAP auth success
Status: current	Access: read-write
NOTIFICATION-TYPE

muKDCAuthOK		1.3.6.1.4.1.388.6.5.3.50
MU Kerberos auth success
Status: current	Access: read-write
NOTIFICATION-TYPE

wlanAuthOK		1.3.6.1.4.1.388.6.5.3.51
WLAN auth success
Status: current	Access: read-write
NOTIFICATION-TYPE

wlanAuthFail		1.3.6.1.4.1.388.6.5.3.52
WLAN auth failed
Status: current	Access: read-write
NOTIFICATION-TYPE

userAuthOK		1.3.6.1.4.1.388.6.5.3.53
Mgt user auth success [radius]
Status: current	Access: read-write
NOTIFICATION-TYPE

radiusSrvTimeout		1.3.6.1.4.1.388.6.5.3.54
Radius server timeout
Status: current	Access: read-write
NOTIFICATION-TYPE

kdcPrincAdd		1.3.6.1.4.1.388.6.5.3.55
KDC user [added]
Status: current	Access: read-write
NOTIFICATION-TYPE

kdcPrincChgd		1.3.6.1.4.1.388.6.5.3.56
KDC user [changed]
Status: current	Access: read-write
NOTIFICATION-TYPE

kdcPrincDel		1.3.6.1.4.1.388.6.5.3.57
KDC user [deleted]
Status: current	Access: read-write
NOTIFICATION-TYPE

kdcDBReplaced		1.3.6.1.4.1.388.6.5.3.58
KDC DB replaced
Status: current	Access: read-write
NOTIFICATION-TYPE

hsbStdbyAutoRev		1.3.6.1.4.1.388.6.5.3.59
Standy auto-revert
Status: current	Access: read-write
NOTIFICATION-TYPE

hsbPrimAutoRev		1.3.6.1.4.1.388.6.5.3.60
Primary auto-revert
Status: current	Access: read-write
NOTIFICATION-TYPE

acsError		1.3.6.1.4.1.388.6.5.3.61
Auto channel select error
Status: current	Access: read-write
NOTIFICATION-TYPE

eopActive		1.3.6.1.4.1.388.6.5.3.62
Emergency Policy [active]
Status: current	Access: read-write
NOTIFICATION-TYPE

eopInactive		1.3.6.1.4.1.388.6.5.3.63
Emergency Policy [deactivated]
Status: current	Access: read-write
NOTIFICATION-TYPE

debugEvent		1.3.6.1.4.1.388.6.5.3.64
Miscellaneous debug events
Status: current	Access: read-write
NOTIFICATION-TYPE

hsbStartUp		1.3.6.1.4.1.388.6.5.3.65
HSB Starts Up
Status: current	Access: read-write
NOTIFICATION-TYPE

hsbPeerConnect		1.3.6.1.4.1.388.6.5.3.66
HSB Peer Connect
Status: current	Access: read-write
NOTIFICATION-TYPE

ccFanAndTempNotification		1.3.6.1.4.1.388.6.5.3.67
Notification sent if the given threshold has been exceeded.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccAccessChangedNotification		1.3.6.1.4.1.388.6.5.3.68
This notification is sent if the permitted methods of access has changed. Note that each change to the access methods permitted generates a separate notification.
Status: current	Access: read-write
NOTIFICATION-TYPE

tpcPowerReduced		1.3.6.1.4.1.388.6.5.3.69
Radio power is reduced [TPC]
Status: current	Access: read-write
NOTIFICATION-TYPE

dfsRadarDetect		1.3.6.1.4.1.388.6.5.3.70
Radar is detected [DFS]
Status: current	Access: read-write
NOTIFICATION-TYPE

dfsChannelSelect		1.3.6.1.4.1.388.6.5.3.71
Channel selected to avoid radar [DFS]
Status: current	Access: read-write
NOTIFICATION-TYPE

dfsChannelSwitch		1.3.6.1.4.1.388.6.5.3.72
Switch to new channel [DFS]
Status: current	Access: read-write
NOTIFICATION-TYPE

dfsChannelRevert		1.3.6.1.4.1.388.6.5.3.73
Revert back to original channel [DFS]
Status: current	Access: read-write
NOTIFICATION-TYPE

radioSuspend		1.3.6.1.4.1.388.6.5.3.74
Radio is suspended - no available channels
Status: current	Access: read-write
NOTIFICATION-TYPE

radioResume		1.3.6.1.4.1.388.6.5.3.75
Radio is resumed
Status: current	Access: read-write
NOTIFICATION-TYPE

radioRandomChannel		1.3.6.1.4.1.388.6.5.3.76
Radio is moved to random channel
Status: current	Access: read-write
NOTIFICATION-TYPE

ccRapNewRogueAp		1.3.6.1.4.1.388.6.5.3.77
A new AP has been heard that was NOT authorized.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccRapNewApprovedAp		1.3.6.1.4.1.388.6.5.3.78
A new AP has been heard that was in some manner authorized.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapWVPNAlert		1.3.6.1.4.1.388.6.5.3.79
ccTrapWVPNAlert trap. This trap is sent when there are any anomalies with the client/server certificates.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapWVPNInfo		1.3.6.1.4.1.388.6.5.3.80
ccTrapWVPNInfo Trap. This trap is sent when there are any client/server configuration changes or connection establishments.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccTrapInfoRadiusAcctInfo		1.3.6.1.4.1.388.6.5.3.81
ccTrapInfoRadiusAcct: This trap is not supported.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccInfoRadiusServer		1.3.6.1.4.1.388.6.5.3.82
This trap is sent when ccRadiusServer is enabled/disabled or it's configuration changes are saved.
Status: current	Access: read-write
NOTIFICATION-TYPE

configChangeUpdate		1.3.6.1.4.1.388.6.5.3.83
A trap for every configuration change happening in the switch.
Status: current	Access: read-write
NOTIFICATION-TYPE

tunnelStatusChanged		1.3.6.1.4.1.388.6.5.3.84
This trap is sent whenever there is a Tuneel Status Change
Status: current	Access: read-write
NOTIFICATION-TYPE

tunnelUnknownProtocol		1.3.6.1.4.1.388.6.5.3.85
This trap is sent whenever there is a non Ip packet received on Tunnel
Status: current	Access: read-write
NOTIFICATION-TYPE

ccSumStatsAp		1.3.6.1.4.1.388.6.5.3.86
A summary statistic has crossed the prescribed threshold by a Portal. Example: Threshold #%s1 of value %s2 (units:%s3) has been crossed by Portal index=%s4 with MAC=%s5.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccSumStatsMu		1.3.6.1.4.1.388.6.5.3.87
A summary statistic has crossed the prescribed threshold by an MU. Example: Threshold '%s1' of value %s2 (units:%s3) has been crossed by MU MAC=%s4 with IP-addr=%s5.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccSumStatsWlan		1.3.6.1.4.1.388.6.5.3.88
A summary statistic has crossed the prescribed threshold by a WLAN. Example: Threshold #%s1 of value %s2 (units:%s3) has been crossed by WLAN index=%s4 with name=%s5.
Status: current	Access: read-write
NOTIFICATION-TYPE

ccSumStatsSwitch		1.3.6.1.4.1.388.6.5.3.89
A summary statistic has crossed the prescribed threshold by the entire Switch. Example: Threshold %s1 of value %s2 (units:%s3) has been crossed by the entire switch.
Status: current	Access: read-write
NOTIFICATION-TYPE

sensorConvert		1.3.6.1.4.1.388.6.5.3.90
Enable(1)/Disable(2) this trap. This trap is sent when AP is converted to sensor
Status: current	Access: read-write
NOTIFICATION-TYPE

sensorRevert		1.3.6.1.4.1.388.6.5.3.91
Enable(1)/Disable(2) this trap. This trap is sent when Sensor is reverted back to AP
Status: current	Access: read-write
NOTIFICATION-TYPE

sensorFailure		1.3.6.1.4.1.388.6.5.3.92
Enable(1)/Disable(2) this trap. This trap is sent when Failed to communicate to a sensor
Status: current	Access: read-write
NOTIFICATION-TYPE

sensorOffline		1.3.6.1.4.1.388.6.5.3.93
Enable(1)/Disable(2) this trap. This trap is sent when Sensor is no longer responding to ping
Status: current	Access: read-write
NOTIFICATION-TYPE

symbolCCNewInV1dot2dot5		1.3.6.1.4.1.388.6.6
OBJECT IDENTIFIER

ccIdentfication		1.3.6.1.4.1.388.6.6.1
OBJECT IDENTIFIER

ccIdHwVersion		1.3.6.1.4.1.388.6.6.1.1
The same text that follows 'HW=' in sysDescr, EXCLUDING the 'HW='.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdFwVersion		1.3.6.1.4.1.388.6.6.1.2
The same text that follows 'FW=' in sysDescr, EXCLUDING the 'FW='. (The bootcode version).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdSwVersion		1.3.6.1.4.1.388.6.6.1.3
The same text that follows 'SW=' in sysDescr, EXCLUDING the 'SW='.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdMibVersion		1.3.6.1.4.1.388.6.6.1.4
The same text that follows 'MIB=' in sysDescr, EXCLUDING the 'MIB='. The MIB version is identified by a two-digit number and a single letter. For example, '07a'. The number is incremented when the MIB changes in any substantive way; (any way that a person with a MIB browser could tell a device implementing one version from another device at a different MIB level). The letter is incremented when only undetectable changes are made, such as changes to comments or descriptions. A given version of network management software will accurately manage all device versions that have the same numeric MIB version number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdCliVersion		1.3.6.1.4.1.388.6.6.1.5
The same text that follows 'CLI=' in sysDescr, EXCLUDING the 'CLI='.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdXmlVersion		1.3.6.1.4.1.388.6.6.1.6
Version of XML template implemented on this switch. (Much like MIB version - read details there).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdSerialNumber		1.3.6.1.4.1.388.6.6.1.7
The serial number of the switch. This value is unique for each instance of a given switch type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdSwBuildDate		1.3.6.1.4.1.388.6.6.1.8
The date & time the software was built; (corresponding to 'ccIdSwVersion' - there is no corresponding value for 'ccIdFwVersion'). The format of this data is not specified, (and so net mgmt software cannot assume how to parse date, month, year, hour, etc).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdSwBuildInfo		1.3.6.1.4.1.388.6.6.1.9
Additional information about the particular build of the software running on the switch; (corresponding to 'ccIdSwVersion' - there is no corresponding value for 'ccIdFwVersion'). (No format for the characters in this DisplayString is specified).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdProductFamily		1.3.6.1.4.1.388.6.6.1.10
Describes the product family. For all Butterfly implementations, this will be 'WS5000'.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccIdProductModel		1.3.6.1.4.1.388.6.6.1.11
Describes the product model. For Butterfly, this will be '5000' or '5100'.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccHwSensors		1.3.6.1.4.1.388.6.6.2
OBJECT IDENTIFIER

ccHwSensorsReset		1.3.6.1.4.1.388.6.6.2.1
Set to TRUE to reset the max values seen so far.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccHwSensorsTable		1.3.6.1.4.1.388.6.6.2.2
A table of fan and temp sensors for this switch. (A table was used rather than a collection of scalars, so that one table could describe numerous different configurations of different numbers/types of fan and temp sensors on different types of switches).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcHwSensorsEntry

ccHwSensorsEntry		1.3.6.1.4.1.388.6.6.2.2.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcHwSensorsEntry

ccHwSensorsIndex		1.3.6.1.4.1.388.6.6.2.2.1.1
Simple index.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..2147483647

ccHwSensorsType		1.3.6.1.4.1.388.6.6.2.2.1.2
Tells the type of the fan or temp sensor, and the corresponding units for the readings. Note that any given temp sensors appears in this table only once; (NOT twice - once for deg-F and once for deg-C). The choice of implementing a temp sensor as deg-F or deg-C is left to the convenience of the switch developer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tempInDegC(2), variableSpeedFanInRpm(3), onOffFanInDutyCycle(4)

ccHwSensorsDescr		1.3.6.1.4.1.388.6.6.2.2.1.3
A short, text description of the sensor. For example: 'system fan' 'CPU fan/blower' 'CPU temperature' 'ambient temperature - near CPU' 'ambient temperature - system'
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccHwSensorsCurrentReading		1.3.6.1.4.1.388.6.6.2.2.1.4
The current, live reading for that sensor. For sensors of type onOffFanInDutyCycle, this value will be 0 if the fan is currently not running, and 1 if the fan is running.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccHwSensorsMinimum		1.3.6.1.4.1.388.6.6.2.2.1.5
The minimum reading observed since system reboot, (or since the fan/temp readings were reset). For sensors of type onOffFanInDutyCycle, this value will be the minimum 'duty' cycle of the fan, (ranging 0..100). The time interval over which the duty cycle is calculated is up to the switch, but shall be long enough as to provide a meaningful result.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

ccHwSensorsMaximum		1.3.6.1.4.1.388.6.6.2.2.1.6
The maximum observed since system reboot, (or since the fan/temp readings were reset). For sensors of type onOffFanInDutyCycle, this value will be the maximum 'duty' cycle of the fan, (ranging 0..100). The time interval over which the duty cycle is calculated is up to the switch, but shall be long enough as to provide a meaningful result.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

ccHwSensorsNotifyIfAbove		1.3.6.1.4.1.388.6.6.2.2.1.7
When the given sensor's reading exceeds this threshold, a notification is generated. If no notifications are desired for this sensor, set this threshold to 0. (No corresponding _NotifyIfBelow has been provided, as such a function is not anticipated to be useful. We don't forsee low temps or infrequently/slowly operating fans to be interesting events to send notifications on). (Note that the corresponding notification is NOT defined here since such notifications are defined in the ccFault group). The WS5100 switch does NOT support any thresholds on fans. (It is retained here in expectation that other platforms will allow such thresholds). If this value is SET on a WS5000, (for a row that represents a fan), a SET-FAILED, (bad value) will be returned.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccSsh		1.3.6.1.4.1.388.6.6.3
OBJECT IDENTIFIER

ccSshEnabled		1.3.6.1.4.1.388.6.6.3.1
Set to TRUE to enable SSH access to switch.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccSshProtocolVersion		1.3.6.1.4.1.388.6.6.3.2
The version of SSH to use in communicating with the switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	sshV1orV2(1), sshV2(2)

ccSshPort		1.3.6.1.4.1.388.6.6.3.3
Port number to use in talking SSH to the switch. Factory-default value is 22.The valid ranges are 1025-65535, 22.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccSshAuthenticationTimeout		1.3.6.1.4.1.388.6.6.3.4
If the SSH user has not been re-authenticated within this period of time, the connection will be dropped.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32

ccSshInactivityTimeout		1.3.6.1.4.1.388.6.6.3.5
If there has been no activity on the connection for this period of time, the connection will be dropped. Factory-default value is 5min.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32

ccAccessMethods		1.3.6.1.4.1.388.6.6.4
OBJECT IDENTIFIER

ccAccessMethodsPermitted		1.3.6.1.4.1.388.6.6.4.1
A BITs value that indicates which management methods are currently permitted to the switch.
Status: deprecated	Access: read-write
OBJECT-TYPE
	BITS	accessViaTelnetAllowed(0), accessViaSshAllowed(1), accessViaXmlAllowed(2), accessViaSnmpV12Allowed(3), accessViaSnmpV3Allowed(4)

ccV1dot2dot5Groups		1.3.6.1.4.1.388.6.6.1000
OBJECT IDENTIFIER

v1dot2dot5Group		1.3.6.1.4.1.388.6.6.1000.2
Description.
Status: current	Access: read-write
OBJECT-GROUP

v1dot2dot5NotificationGroup		1.3.6.1.4.1.388.6.6.1000.3
Description.
Status: current	Access: read-write
NOTIFICATION-GROUP

v1dot2dot5GroupOfDepricated		1.3.6.1.4.1.388.6.6.1000.4
Description.
Status: deprecated	Access: read-write
OBJECT-GROUP

ccRadiusServer		1.3.6.1.4.1.388.6.9
OBJECT IDENTIFIER

ccRadius		1.3.6.1.4.1.388.6.9.1
OBJECT IDENTIFIER

ccRadiusDataSource		1.3.6.1.4.1.388.6.9.1.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	local(1), ldap(2)

ccRadiusDefaultEapType		1.3.6.1.4.1.388.6.9.1.2
Description. Deafult EAP type advertised by the radius server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ttls(1), peap(2)

ccRadiusAuthTypePeap		1.3.6.1.4.1.388.6.9.1.3
Description. Type of EAP type within PEAP
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	gtc(1), mschapv2(2)

ccRadiusAuthTypeTtls		1.3.6.1.4.1.388.6.9.1.4
Description. Type of EAP type within TTLS
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	md5(1), pap(2), mschapv2(3)

ccRadiusServerCertificate		1.3.6.1.4.1.388.6.9.1.5
This OID is used to import the server certificate syntax:- /image/ or / Note:- user can copy the certificates from a ftp server using ccFtp OID in ccImageDload Table which copies the downloaded file in /image directory Before importing server certificate user has to set the Private key password (OID;- ccRadiusEapPasswd) which was given while genrating the server certificate If no password is used to genrate the certificate then no need to set the Private key password
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..10)

ccRadiusCACertificate		1.3.6.1.4.1.388.6.9.1.6
This OID is used to import the CA certificate syntax:- /image/ or / Note:- user can copy the certificates from a ftp server using ccFtp OID in ccImageDload Table which copies the downloaded file in /image directory
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..10)

ccRadiusClientAuthTable		1.3.6.1.4.1.388.6.9.1.7
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRadiusClientAuthEntry

ccRadiusClientAuthEntry		1.3.6.1.4.1.388.6.9.1.7.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRadiusClientAuthEntry

ccRadiusClientAuthIndex		1.3.6.1.4.1.388.6.9.1.7.1.1
This table(ccRadiusClientAuthTable) is indexed by the radius client name.Therefore this OID contains the Client Name. When this table is created, the client name has to be specified here.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

ccRadiusClientAuthIpAddr		1.3.6.1.4.1.388.6.9.1.7.1.2
The client IP address.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

ccRadiusClientAuthMask		1.3.6.1.4.1.388.6.9.1.7.1.3
Mask of the client's IP address
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

ccRadiusClientAuthSharedSecret		1.3.6.1.4.1.388.6.9.1.7.1.4
Shared secret between the client and the radius server
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadiusClientAuthRowStatus		1.3.6.1.4.1.388.6.9.1.7.1.5
Create/destroy a Row
Status: current	Access: read-create
OBJECT-TYPE
	AbbrevRowStatus

ccRadiusServerEnable		1.3.6.1.4.1.388.6.9.1.8
Enable(1) or disable(2) the radius server. Note:Before enabling or disabling radius server save the radius server status to make effect of the modifications done Enabling the radius server may fail if certificates are not imported or Private key password set does not match certificates or no radius client is added. Use ccRadiusEapPasswd to set Private key password
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRadiusSaveStatus		1.3.6.1.4.1.388.6.9.1.9
Save the configuration info for the radius server. You can only enable (1) this OID. Disable(2) is not a valid input.This OID is SET only.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

ccRadiusEapPasswd		1.3.6.1.4.1.388.6.9.1.10
Enter the Private Key Password for Eap which was used to generate the certificates.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..16)

ccRadiusProxy		1.3.6.1.4.1.388.6.9.2
OBJECT IDENTIFIER

ccRadiusProxyRetryCount		1.3.6.1.4.1.388.6.9.2.1
Description. Number of retries for sending messages to a proxy
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..10

ccRadiusProxyTimeout		1.3.6.1.4.1.388.6.9.2.2
Description. Timeout in seconds before retrying to a proxy
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	3..6

ccRadiusProxyServerTable		1.3.6.1.4.1.388.6.9.2.3
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRadiusProxyServerEntry

ccRadiusProxyServerEntry		1.3.6.1.4.1.388.6.9.2.3.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRadiusProxyServerEntry

ccRadiusProxyServerIndex		1.3.6.1.4.1.388.6.9.2.3.1.1
Description. A get operation on this OID displays the Proxy Server Name. This table is indexed by this name hence user has to give the Proxy server name as input to this OID.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..50)

ccRadiusProxyServerPrefixOrSuffix		1.3.6.1.4.1.388.6.9.2.3.1.2
Description. Prefix of suffix used for proxying radius request to a proxy server Note:The value of this OID has to be unique among existing proxy server.If the row creation gives commit fail while creation of a row then the suffix given as input for new row creation may be existing in some other row also.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..50)

ccRadiusProxyServerIp		1.3.6.1.4.1.388.6.9.2.3.1.3
Description. IP address of the proxy server
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

ccRadiusProxyServerPort		1.3.6.1.4.1.388.6.9.2.3.1.4
Description. Port of proxy server
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..65535

ccRadiusProxyServerSharedSecret		1.3.6.1.4.1.388.6.9.2.3.1.5
Description. Shared secret between radius server and proxy server
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadiusProxyServerRowStatus		1.3.6.1.4.1.388.6.9.2.3.1.6
Description. status
Status: current	Access: read-create
OBJECT-TYPE
	AbbrevRowStatus

ccRadiusLdap		1.3.6.1.4.1.388.6.9.3
OBJECT IDENTIFIER

ccRadiusLdap1Server		1.3.6.1.4.1.388.6.9.3.1
OBJECT IDENTIFIER

ccRadiusLdap1ServerIp		1.3.6.1.4.1.388.6.9.3.1.1
IP address of the LDAP server
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccRadiusLdap1ServerPort		1.3.6.1.4.1.388.6.9.3.1.2
Port of the LDAP server
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ccRadiusLdap1LoginAttribute		1.3.6.1.4.1.388.6.9.3.1.3
Name of the login attribute used by LDAP for authenticating the user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccRadiusLdap1PasswordAttribute		1.3.6.1.4.1.388.6.9.3.1.4
Password attribute used by LDAP for authenticating the user. The maximum length for the password is 64 chars.
Status: current	Access: read-write
OBJECT-TYPE
	Password	Size(1..64)

ccRadiusLdap1BindDistinguishedName		1.3.6.1.4.1.388.6.9.3.1.5
Bind DN used the LDAP client on the WS5000 to connect to a LDAP server
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccRadiusLdap1BindDistinguishedPassword		1.3.6.1.4.1.388.6.9.3.1.6
Bind password used the LDAP client on the WS5000 to connect to a LDAP server. The maximum length for the password is 32 chars.
Status: current	Access: read-write
OBJECT-TYPE
	Password	Size(1..32)

ccRadiusLdap1BaseDistinguishedName		1.3.6.1.4.1.388.6.9.3.1.7
LDAP1 Distinguished Name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ccRadiusLdap1GroupAttribute		1.3.6.1.4.1.388.6.9.3.1.8
Name of the group attribute used by LDAP for retrieving the group associated with a user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ccRadiusLdap1GroupFilter		1.3.6.1.4.1.388.6.9.3.1.9
Filter specification used by the LDAP client to retrieve the groups associated with a user.The maximum of 256 characters can be in the input for GroupFilter.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..256)

ccRadiusLdap1GroupMembershipAttribute		1.3.6.1.4.1.388.6.9.3.1.10
Name of the attribute in the user schema which specifies groups associated with the user. This is used if the group filter specified by ccRadiusGroupFilter return an error.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

ccRadiusLdap2Server		1.3.6.1.4.1.388.6.9.3.2
OBJECT IDENTIFIER

ccRadiusLdap2ServerIp		1.3.6.1.4.1.388.6.9.3.2.1
LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccRadiusLdap2ServerPort		1.3.6.1.4.1.388.6.9.3.2.2
Port of the LDAP server2. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..6

ccRadiusLdap2LoginAttribute		1.3.6.1.4.1.388.6.9.3.2.3
Name of the login attribute used by LDAP for authenticating the user. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

ccRadiusLdap2PasswordATtribute		1.3.6.1.4.1.388.6.9.3.2.4
Name of the login attribute used by LDAP for authenticating the user. The maximum length for the password is 64. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	Password	Size(1..64)

ccRadiusLdap2BindDistinguishedName		1.3.6.1.4.1.388.6.9.3.2.5
Bind DN used the LDAP client on the WS5000 to connect to a LDAP server. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccRadiusLdap2BindDistinguishedPassword		1.3.6.1.4.1.388.6.9.3.2.6
Bind password used the LDAP client on the WS5000 to connect to a LDAP server. The maximum length for the password is 32. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	Password	Size(1..32)

ccRadiusLdap2BaseDistinguishedName		1.3.6.1.4.1.388.6.9.3.2.7
LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccRadiusLdap2GroupAttribute		1.3.6.1.4.1.388.6.9.3.2.8
Name of the group attribute used by LDAP for retrieving the group associated with a user. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

ccRadiusLdap2GroupFilter		1.3.6.1.4.1.388.6.9.3.2.9
Filter specification used by the LDAP client to retrieve the groups associated with a user. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

ccRadiusLdap2GroupMembershipAttribute		1.3.6.1.4.1.388.6.9.3.2.10
Name of the attribute in the user schema which specifies groups associated with the user. This is used if the group filter specified by ccRadiusGroupFilter return an error. LDAP2 is not supported at present.Hence this OID will not support any fuctionality.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

ccRadiusUsers		1.3.6.1.4.1.388.6.9.4
OBJECT IDENTIFIER

ccRadiusGroupsTable		1.3.6.1.4.1.388.6.9.4.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRadiusGroupsEntry

ccRadiusGroupsEntry		1.3.6.1.4.1.388.6.9.4.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRadiusGroupsEntry

ccRadiusGroup		1.3.6.1.4.1.388.6.9.4.1.1.1
Description. Name of the group
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..8)

ccRadiusGroupRowStatus		1.3.6.1.4.1.388.6.9.4.1.1.2
Row status shows the existence of the particular group. The valid input is 4 for Row creation and 6 for deletion of an existing row.
Status: current	Access: read-create
OBJECT-TYPE
	AbbrevRowStatus

ccRadiusUsersTable		1.3.6.1.4.1.388.6.9.4.2
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRadiusUsersEntry

ccRadiusUsersEntry		1.3.6.1.4.1.388.6.9.4.2.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRadiusUsersEntry

ccRadiusUsersId		1.3.6.1.4.1.388.6.9.4.2.1.1
This OID is used to add a user. The user name can not be greater 64 characters
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..8)

ccRadiusUsersPassword		1.3.6.1.4.1.388.6.9.4.2.1.2
Set the password for the created UserID Note:User can also reset the password after the creation of the UserID.
Status: current	Access: read-create
OBJECT-TYPE
	Password	Size(6..64)

ccRadiusUsersGroups		1.3.6.1.4.1.388.6.9.4.2.1.3
Status: current	Access: read-create
OBJECT-TYPE
	BITS	null(0), g1(1), g2(2), g3(3), g4(4), g5(5), g6(6), g7(7), g8(8), g9(9), g10(10), g11(11), g12(12), g13(13), g14(14), g15(15), g16(16), g17(17), g18(18), g19(19), g20(20), g21(21), g22(22), g23(23), g24(24), g25(25), g26(26), g27(27), g28(28), g29(29), g30(30), g31(31), g32(32), g33(33), g34(34), g35(35), g36(36), g37(37), g38(38), g39(39), g40(40), g41(41), g42(42), g43(43), g44(44), g45(45), g46(46), g47(47), g48(48), g49(49), g50(50), g51(51), g52(52), g53(53), g54(54), g55(55), g56(56), g57(57), g58(58), g59(59), g60(60), g61(61), g62(62), g63(63), g64(64), g65(65), g66(66), g67(67), g68(68), g69(69), g70(70), g71(71), g72(72), g73(73), g74(74), g75(75), g76(76), g77(77), g78(78), g79(79), g80(80), g81(81), g82(82), g83(83), g84(84), g85(85), g86(86), g87(87), g88(88), g89(89), g90(90), g91(91), g92(92), g93(93), g94(94), g95(95), g96(96), g97(97), g98(98), g99(99), g100(100)

ccRadiusUsersRowStatus		1.3.6.1.4.1.388.6.9.4.2.1.4
Description.
Status: current	Access: read-create
OBJECT-TYPE
	AbbrevRowStatus

ccRadiusAccess		1.3.6.1.4.1.388.6.9.5
OBJECT IDENTIFIER

ccRadiusAccessTable		1.3.6.1.4.1.388.6.9.5.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRadiusAccessEntry

ccRadiusAccessEntry		1.3.6.1.4.1.388.6.9.5.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRadiusAccessEntry

ccRadiusAccessGroupId		1.3.6.1.4.1.388.6.9.5.1.1.1
Displays the GroupId for which coressponding WLAN mapping is being dispalyed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRadiusAccessWlanPtrs		1.3.6.1.4.1.388.6.9.5.1.1.2
Status: current	Access: read-write
OBJECT-TYPE
	BITS	null(0), wlan1(1), wlan2(2), wlan3(3), wlan4(4), wlan5(5), wlan6(6), wlan7(7), wlan8(8), wlan9(9), wlan10(10), wlan11(11), wlan12(12), wlan13(13), wlan14(14), wlan15(15), wlan16(16), wlan17(17), wlan18(18), wlan19(19), wlan20(20), wlan21(21), wlan22(22), wlan23(23), wlan24(24), wlan25(25), wlan26(26), wlan27(27), wlan28(28), wlan29(29), wlan30(30), wlan31(31), wlan32(32), wlan33(33), wlan34(34), wlan35(35), wlan36(36), wlan37(37), wlan38(38), wlan39(39), wlan40(40), wlan41(41), wlan42(42), wlan43(43), wlan44(44), wlan45(45), wlan46(46), wlan47(47), wlan48(48), wlan49(49), wlan50(50), wlan51(51), wlan52(52), wlan53(53), wlan54(54), wlan55(55), wlan56(56), wlan57(57), wlan58(58), wlan59(59), wlan60(60), wlan61(61), wlan62(62), wlan63(63), wlan64(64), wlan65(65), wlan66(66), wlan67(67), wlan68(68), wlan69(69), wlan70(70), wlan71(71), wlan72(72), wlan73(73), wlan74(74), wlan75(75), wlan76(76), wlan77(77), wlan78(78), wlan79(79), wlan80(80)

ccRadiusAcct		1.3.6.1.4.1.388.6.9.6
OBJECT IDENTIFIER

ccRadiusAcctIPAddress		1.3.6.1.4.1.388.6.9.6.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccRadiusAcctPort		1.3.6.1.4.1.388.6.9.6.2
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..6

ccRadiusAcctTimeout		1.3.6.1.4.1.388.6.9.6.3
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..10

ccRadiusAcctMaxRetry		1.3.6.1.4.1.388.6.9.6.4
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccRadiusAcctSharedSecret		1.3.6.1.4.1.388.6.9.6.5
Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

ccRadiusTimeRestriction		1.3.6.1.4.1.388.6.9.8
OBJECT IDENTIFIER

ccRadiusTimeRestrictionTable		1.3.6.1.4.1.388.6.9.8.1
A table for Radius Time Restrictions.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRadiusTimeRestrictionEntry

ccRadiusTimeRestrictionEntry		1.3.6.1.4.1.388.6.9.8.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRadiusTimeRestrictionEntry

ccRadiusTimeRestrictionStart		1.3.6.1.4.1.388.6.9.8.1.1.1
Radius Time Restriction's Start time
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..4)

ccRadiusTimeRestrictionEnd		1.3.6.1.4.1.388.6.9.8.1.1.2
Radius Time Restriction's End time
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..4)

ccRadiusTimeRestrictionDays		1.3.6.1.4.1.388.6.9.8.1.1.3
Radius Time Restriction in Days. Valid values are: Sa, Su, Mo, Tu, We, Th, Fr, All, Wk(weekdays). These values are Case sensitive.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2..3)

ccRap		1.3.6.1.4.1.388.6.10
OBJECT IDENTIFIER

ccRapControl		1.3.6.1.4.1.388.6.10.1
OBJECT IDENTIFIER

ccRapControlPollSymbolMus		1.3.6.1.4.1.388.6.10.1.1
OBJECT IDENTIFIER

ccRapPollSymbolMusEnable		1.3.6.1.4.1.388.6.10.1.1.1
Description. Enable/disable polling MUs for their lists of known APs. The state of this variable persists across reboots. The factory-default state is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapPollSymbolMusInterval		1.3.6.1.4.1.388.6.10.1.1.2
Description. Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of 5min or more would interrupt MUs less than 1% of the time. The state of this variable persists across reboots. The factory-default state is 20 (minutes).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccRapControlOnChannel		1.3.6.1.4.1.388.6.10.1.2
OBJECT IDENTIFIER

ccRapOnChannelEnable		1.3.6.1.4.1.388.6.10.1.2.1
Enable/disable polling MUs for their lists of known APs. The state of this variable persists across reboots. The factory-default state is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapOnChannelInterval		1.3.6.1.4.1.388.6.10.1.2.2
Description. Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of 5min or more would interrupt MUs less than 1% of the time. The state of this variable persists across reboots. The factory-default state is 40 (minutes).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccRapControlDetectors		1.3.6.1.4.1.388.6.10.1.3
OBJECT IDENTIFIER

ccRapDetectorsEnable		1.3.6.1.4.1.388.6.10.1.3.1
Enable/disable the entire 'detector' sub-system. On the true-to-false transition, any portals previously claimed as listeners will be released and reset. Once reset, they will appear to the switch as if just newly installed, (and thus may or may not be adopted depending on settings in the switch). The state of this variable persists across reboots. The factory-default state is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapDetectorsInterval		1.3.6.1.4.1.388.6.10.1.3.2
Description. Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of 5min or more would interrupt MUs less than 1% of the time. The state of this variable persists across reboots. The factory-default state is 60 (minutes).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccRapAuth		1.3.6.1.4.1.388.6.10.2
OBJECT IDENTIFIER

ccRapAuthList		1.3.6.1.4.1.388.6.10.2.1
OBJECT IDENTIFIER

ccRapAuthAllSymbolMac		1.3.6.1.4.1.388.6.10.2.1.1
Description. If TRUE, any newly-discovered AP that has a MAC address with a Symbol vendor prefix is authorized, regardless of the ESSID.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapAuthTable		1.3.6.1.4.1.388.6.10.2.1.2
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRapAuthEntry

ccRapAuthEntry		1.3.6.1.4.1.388.6.10.2.1.2.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRapAuthEntry

ccRapAuthIndex		1.3.6.1.4.1.388.6.10.2.1.2.1.1
Description. Index
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32	1..24

ccRapAuthMacFilter		1.3.6.1.4.1.388.6.10.2.1.2.1.2
Description. MAC address of AP to consider 'authorized'. To specify the entire MAC address as a wildcard, (match any MAC address), use FF:FF:FF:FF:FF:FF. (While it had been considered, it is NOT possible to wildcard just the vendor portion of the MAC). An individual SET is not supported. Created only thru' a row create.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccRapAuthEssidFilter		1.3.6.1.4.1.388.6.10.2.1.2.1.3
Description. ESSID of AP to consider 'authorized'. Set to 33 '*' characters for wildcard, (to match any ESSID). (ESSIDs must be 32ch or less).
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccRapAuthRowExists		1.3.6.1.4.1.388.6.10.2.1.2.1.4
Description. A kludge to avoid RowStatus and save development time. Set this value to true when creating the row. Set this value to false to destroy the row. ??- better name.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccRapAuthErase		1.3.6.1.4.1.388.6.10.2.1.3
Setting this value to TRUE erases all AuthTable entries.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapAuthCopyAllApproved		1.3.6.1.4.1.388.6.10.2.1.4
Causes all ccRapResultsApprovedTable entries to be immediately copied to the ccRapAuthTable.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapAuthCopyAllRogue		1.3.6.1.4.1.388.6.10.2.1.5
Description.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapResults		1.3.6.1.4.1.388.6.10.3
OBJECT IDENTIFIER

ccRapResultsApproved		1.3.6.1.4.1.388.6.10.3.1
OBJECT IDENTIFIER

ccRapResultsApprovedAgeOut		1.3.6.1.4.1.388.6.10.3.1.1
Description. If an entry in the _ResultsApproved table is not heard by any means for this number of minutes, is elligable to be removed from the table by the switch; (the switch, however, might not remove the entry until it gets around to it). A value of 0 indicates that entries will never be 'aged-out' of the table. The state of this variable persists across reboots. The factory-default state is 1 week, (10080 min).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccRapResultsApprovedTable		1.3.6.1.4.1.388.6.10.3.1.2
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRapResultsApprovedEntry

ccRapResultsApprovedEntry		1.3.6.1.4.1.388.6.10.3.1.2.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRapResultsApprovedEntry

ccRapResultsApprovedIndex		1.3.6.1.4.1.388.6.10.3.1.2.1.1
Description.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32	1..50

ccRapResultsApprovedApMac		1.3.6.1.4.1.388.6.10.3.1.2.1.2
Description. MAC address of the heard AP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsApprovedEssid		1.3.6.1.4.1.388.6.10.3.1.2.1.3
Description. ESSID of the heard AP
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsApprovedCopyToAuthTable		1.3.6.1.4.1.388.6.10.3.1.2.1.4
Description. When set to TRUE, this entry is copied to the RuleTable.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapResultsApprovedFirstHeard		1.3.6.1.4.1.388.6.10.3.1.2.1.5
Description. Snapshot of sysUpTime the first time this AP MAC/ESSID combination was heard by any Symbol MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsApprovedLastHeard		1.3.6.1.4.1.388.6.10.3.1.2.1.6
Description. Snapshot of sysUpTime the most recent time this AP MAC/ESSID combination was heard by any Symbol MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsApprovedPortalPtr		1.3.6.1.4.1.388.6.10.3.1.2.1.7
Description. A mask of Portal table entries. Those Portal entries indicated by a '1' in this mask were at one time the servicing Portal for an MU that reported hearing this AP. For a rogue of limited range in the parking lot on the north side of a store, it would be expected that only the Portals located in the north end of the store would be indicated by this mask, thus giving a rough indication of general direction of the rogue. This is currently not-supported.
Status: current	Access: read-only
OBJECT-TYPE
	MultiPointer255

ccRapResultsApprovedHowFound		1.3.6.1.4.1.388.6.10.3.1.2.1.8
Description. Describes the status of this AP. ??- I don't think we would report adoptedAp on the results table, so don't need this enum value.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsApprovedHowAuth		1.3.6.1.4.1.388.6.10.3.1.2.1.9
Description. Describes how this AP was authorized, (or not). The order in which the various methods of authorizing APs is attempted is exactly the numerical order of the enums. ??- I deleted adoptedAp, since it seems to me that there is no good reason to report APs that this switch has adopted.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsApprovedRowErase		1.3.6.1.4.1.388.6.10.3.1.2.1.10
Set this to 1 to erase this row. In Idle state it returns 2.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapResultsApprovedErase		1.3.6.1.4.1.388.6.10.3.1.3
Description. Setting this value to TRUE erases all Results entries. Any APs heard after that event will be treated as newly heard; (which means they will also generate notifications, if enabled). ??- need 2nd scalar.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapResultsRogue		1.3.6.1.4.1.388.6.10.3.2
OBJECT IDENTIFIER

ccRapResultsRogueAgeOut		1.3.6.1.4.1.388.6.10.3.2.1
Description. If an entry in the _ResultsRogue table is not heard by any means for this number of minutes, is elligable to be removed from the table by the switch; (the switch, however, might not remove the entry until it gets around to it). A value of 0 indicates that entries will never be 'aged-out' of the table. The state of this variable persists across reboots. The factory-default state is 1 week, (10080 min).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ccRapResultsRogueTable		1.3.6.1.4.1.388.6.10.3.2.2
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcRapResultsRogueEntry

ccRapResultsRogueEntry		1.3.6.1.4.1.388.6.10.3.2.2.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcRapResultsRogueEntry

ccRapResultsRogueIndex		1.3.6.1.4.1.388.6.10.3.2.2.1.1
Description.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32	1..50

ccRapResultsRogueApMac		1.3.6.1.4.1.388.6.10.3.2.2.1.2
Description. MAC address of the heard AP
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsRogueEssid		1.3.6.1.4.1.388.6.10.3.2.2.1.3
Description. ESSID of the heard AP
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsRogueCopyToAuthTable		1.3.6.1.4.1.388.6.10.3.2.2.1.4
Description. When set to TRUE, this entry is copied to the RuleTable.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccRapResultsRogueFirstHeard		1.3.6.1.4.1.388.6.10.3.2.2.1.5
Description. Snapshot of sysUpTime the first time this AP MAC/ESSID combination was heard by any Symbol MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsRogueLastHeard		1.3.6.1.4.1.388.6.10.3.2.2.1.6
Description. Snapshot of sysUpTime the most recent time this AP MAC/ESSID combination was heard by any Symbol MU.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsRoguePortalPtr		1.3.6.1.4.1.388.6.10.3.2.2.1.7
Description. A mask of Portal table entries. Those Portal entries indicated by a '1' in this mask were at one time the servicing Portal for an MU that reported hearing this AP. For a rogue of limited range in the parking lot on the north side of a store, it would be expected that only the Portals located in the north end of the store would be indicated by this mask, thus giving a rough indication of general direction of the rogue. This is currently not supported.
Status: current	Access: read-only
OBJECT-TYPE
	MultiPointer255

ccRapResultsRogueHowFound		1.3.6.1.4.1.388.6.10.3.2.2.1.8
Description. Describes the status of this AP. ??- I don't think we would report adoptedAp on the results table, so don't need this enum value.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsRogueClosestPortalPtr		1.3.6.1.4.1.388.6.10.3.2.2.1.9
A pointer to closest reporting Portal to the Rogue AP, (where 'closest' is defined as greatest RSSI value among all Portals reporting this AP).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccRapResultsRogueClosestPortalRssi		1.3.6.1.4.1.388.6.10.3.2.2.1.10
Description. RSSI reported by the closest Portal.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccRapResultsRogueErase		1.3.6.1.4.1.388.6.10.3.2.3
Description. Setting this value to TRUE erases all Results entries. Any APs heard after that event will be treated as newly heard; (which means they will also generate notifications, if enabled). ??- need 2nd scalar.
Status: current	Access: read-write
OBJECT-TYPE
	DoActionNow

ccImageDload		1.3.6.1.4.1.388.6.11
OBJECT IDENTIFIER

ccRestore		1.3.6.1.4.1.388.6.11.1
Restore a new system image, a new configuration or a standby configuration on the switch. The syntax is : , system: Restore system image. The corresponding should be a image file. config: Restore a new configuration. the corresponding should be a .cfg file. standby: Restore a standby configuration. A GET on this oid will give the current status of the SET operation. The restore operation may take upto 10 minutes and hence the manager may not be able to contact the switch during this process.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccFtp		1.3.6.1.4.1.388.6.11.2
FTP an image file, configuration file to the switch from an external server on a SET operation. The files will be transferred to the default directory in the switch ie /image. Syntax: ,,,, The time taken to finish the file transfer will depend on the size of the file. A GET on this OID will show the previous status for this operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccTftp		1.3.6.1.4.1.388.6.11.3
Transfer files thru' tftp on a SET operation. TFTP a image file, configuration file to the switch from an external server. The files will be transferred to the default directory in the switch ie /image. Syntax: , Files will be picked-up from the default /tftpboot directory or from the directory configured by the tftp server. A GET will show the previous status of this operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccListFiles		1.3.6.1.4.1.388.6.11.4
Do a GET to list all the files present in the /image directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccDeleteFiles		1.3.6.1.4.1.388.6.11.5
A SET will delete files in the /image directory. Syntax: See ccListFiles to see a list of files in /image directory. A GET will return the status of the previous operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccRFStatistics		1.3.6.1.4.1.388.6.16
OBJECT IDENTIFIER

ccAp		1.3.6.1.4.1.388.6.16.1
OBJECT IDENTIFIER

ccApTable		1.3.6.1.4.1.388.6.16.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcApEntry

ccApEntry		1.3.6.1.4.1.388.6.16.1.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcApEntry

ccApIndex		1.3.6.1.4.1.388.6.16.1.1.1.1
Small, arbitrary integer index
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..255

ccApNicMac		1.3.6.1.4.1.388.6.16.1.1.1.2
MAC Address of this Access Port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApModelNumber		1.3.6.1.4.1.388.6.16.1.1.1.3
Model number of Access Port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApSerialNumber		1.3.6.1.4.1.388.6.16.1.1.1.4
Serial Number of this Access Port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApPcbRevision		1.3.6.1.4.1.388.6.16.1.1.1.5
Revision of the printed circuit board for this Access Port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApBootLoaderRev		1.3.6.1.4.1.388.6.16.1.1.1.6
Revision of the boot loader code in this Access Port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApWispVersion		1.3.6.1.4.1.388.6.16.1.1.1.7
Version of the WISP (AP-Switch) protocol implemented by this Access Port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApRuntimeFwVersion		1.3.6.1.4.1.388.6.16.1.1.1.8
Version of run-time code on this Access Port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApNumPortals		1.3.6.1.4.1.388.6.16.1.1.1.9
The number of Portals implemented on this Access Port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccApPointersToPortals		1.3.6.1.4.1.388.6.16.1.1.1.10
If bit of this value is set, this ApTable entry 'points' to entry in the Portal Table. Such a reference conveys that the Portal entry pointed-to represents a Portal contained in the Access Port represented by this entry. Note that since one Access Port can implement 1, 2, (and in the future possibly more), Portals, this 'pointer' field had to be a bit-mask.
Status: current	Access: read-only
OBJECT-TYPE
	MultiPointer255

ccPortal		1.3.6.1.4.1.388.6.16.2
OBJECT IDENTIFIER

ccPortalTable		1.3.6.1.4.1.388.6.16.2.1
This Table gives general information about the Radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalEntry

ccPortalEntry		1.3.6.1.4.1.388.6.16.2.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalEntry

ccPortalIndex		1.3.6.1.4.1.388.6.16.2.1.1.1
Small, arbitrary integer index.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..255

ccPortalPointerToAp		1.3.6.1.4.1.388.6.16.2.1.1.2
This value is the index in the ApTable for the entry representing the Access Port that contains this Radio Since each Portal has one and only one Access Port as 'Parent', this value is a simple integer, not a bit-mask.
Status: current	Access: read-only
OBJECT-TYPE
	SinglePointer

ccPortalPointersToWlans		1.3.6.1.4.1.388.6.16.2.1.1.3
(Reserved for future implementation).
Status: current	Access: read-only
OBJECT-TYPE
	MultiPointer63

ccPortalName		1.3.6.1.4.1.388.6.16.2.1.1.4
Name of this Radio, as assigned by the Web UI or CLI.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccPortalLocation		1.3.6.1.4.1.388.6.16.2.1.1.5
Location string for this Radio, as assigned by the Web UI or CLI
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccPortalOptions		1.3.6.1.4.1.388.6.16.2.1.1.6
This value describes the presence/absence of internal and/or external primary and/or secondary antennas.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	undefined00(0), undefined01(1), undefined02(2), undefined03(3), undefined04(4), undefined05(5), undefined06(6), undefined07(7), undefined08(8), undefined09(9), undefined10(10), undefined11(11), externalSecondaryAntInstalled(12), internalSecondaryAntInstalled(13), externalPrimaryAntInstalled(14), internalPrimaryAntInstalled(15)

ccPortalMac		1.3.6.1.4.1.388.6.16.2.1.1.7
MAC address of the Radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccPortalNumberofEss		1.3.6.1.4.1.388.6.16.2.1.1.8
The number of ESSs implemented by this Radio
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalNumberOfBss		1.3.6.1.4.1.388.6.16.2.1.1.9
The number of BSSs implemented by this Radio
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalAssociatedMus		1.3.6.1.4.1.388.6.16.2.1.1.10
The number of MUs currently associated to this Radio
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalRadioType		1.3.6.1.4.1.388.6.16.2.1.1.11
Radio type of the Radio
Status: current	Access: read-only
OBJECT-TYPE
	RadioType

ccPortalChannel		1.3.6.1.4.1.388.6.16.2.1.1.12
The value describes the channel the Radio is currently operating on.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ieee802dot11bChannel01(1), ieee802dot11bChannel02(2), ieee802dot11bChannel03(3), ieee802dot11bChannel04(4), ieee802dot11bChannel05(5), ieee802dot11bChannel06(6), ieee802dot11bChannel07(7), ieee802dot11bChannel08(8), ieee802dot11bChannel09(9), ieee802dot11bChannel10(10), ieee802dot11bChannel11(11), ieee802dot11bChannel12(12), ieee802dot11bChannel13(13), ieee802dot11bChannel14(14), ieee802dot11aChannel036(36), ieee802dot11aChannel040(40), ieee802dot11aChannel044(44), ieee802dot11aChannel048(48), ieee802dot11aChannel052(52), ieee802dot11aChannel056(56), ieee802dot11aChannel060(60), ieee802dot11aChannel064(64), ieee802dot11aChannel149(149), ieee802dot11aChannel153(153), ieee802dot11aChannel157(157), ieee802dot11aChannel161(161)

ccPortalTxPowerLevel		1.3.6.1.4.1.388.6.16.2.1.1.13
Output power level for the Radio
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

ccPortalLastAdoption		1.3.6.1.4.1.388.6.16.2.1.1.14
A snapshot of the WS5000's sysUpTime when this Radio was last adopted.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccPortalState		1.3.6.1.4.1.388.6.16.2.1.1.15
This value describes the state of the Radio A healthy Portal would power-on, and quickly advance from portalUpAndWaitingForConfig and then on to portalReceivingConfig and then on to portalUpAndAdopted. A Portal that is denied adoption due to ACLs would show: portalDeniedAdoptionDueToAcl. A Portal that does not 'handshake' with the switch properly would be found in state: portalBroken.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	offline(0), active(1), alert(3), reset(4)

ccPortalBackgroundNoiseNumSamples		1.3.6.1.4.1.388.6.16.2.1.1.16
Total packets received via the Radio included in all the other countries reported in this row.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalBackgroundNoiseBest		1.3.6.1.4.1.388.6.16.2.1.1.17
The best Signal value seen from the Radio so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to 500dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBackgroundNoiseWorst		1.3.6.1.4.1.388.6.16.2.1.1.18
The worst Signal value seen from the Radio so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to -500dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBackgroundNoiseSum		1.3.6.1.4.1.388.6.16.2.1.1.19
A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Radio. Note that this value is normally a negative value ranging from -10dBm to -80dBm. It is possible for this value to be positive, but that would be rare, and would signal an exceptionally strong signal. (This value divided by ccPortalRxRssiNumPkts yields the average Signal value for all packets received from this Radio).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBackgroundNoiseSumSquares		1.3.6.1.4.1.388.6.16.2.1.1.20
A sum of the squares of each Signal value calculated for packets received via this Radio Unlike _SignalSum, this value is never negative, since the square of a negative number is a positive. (This value can be used to calculate the standard deviation for Signal values calculated for packets from this Radio).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccPortalLastMac		1.3.6.1.4.1.388.6.16.2.2
This scalar records the MAC address of the most recent Radio to be Adopted, UnAdopted, or Denied.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccPortalLastReason		1.3.6.1.4.1.388.6.16.2.3
This value notes the reason for the most-recent Radio UnAdoption or Denial.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), aclViolation(2), timeout(3)

ccPortalSystemStatsTable		1.3.6.1.4.1.388.6.16.2.5
The table contains information about various management packets. Transmitted/Receieved by a Radio
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalSystemStatsEntry

ccPortalSystemStatsEntry		1.3.6.1.4.1.388.6.16.2.5.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalSystemStatsEntry

ccPortalSystemStatsBeaconTx		1.3.6.1.4.1.388.6.16.2.5.1.1
The number of Beacons sent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSystemStatsBeaconsTxOctets		1.3.6.1.4.1.388.6.16.2.5.1.2
The number of octets sent in Beacons.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeReqRx		1.3.6.1.4.1.388.6.16.2.5.1.3
The number of Probe Request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeReqRxOctets		1.3.6.1.4.1.388.6.16.2.5.1.4
The number of octets received in Probe Request packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeRespRetriesNone		1.3.6.1.4.1.388.6.16.2.5.1.5
The number of Probe Response packets sent with no retries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeRespRetries1		1.3.6.1.4.1.388.6.16.2.5.1.6
The number of Probe Response packets sent with exactly 1 retry
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeRespRetries2		1.3.6.1.4.1.388.6.16.2.5.1.7
The number of Probe Response packets sent with exactly 2 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeRespRetries3OrMore		1.3.6.1.4.1.388.6.16.2.5.1.8
The number of Probe Response packets sent with exactly 3 retries or more retries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeRespRetriesFailed		1.3.6.1.4.1.388.6.16.2.5.1.9
The number of Probe Response packets that were never successfully transmitted because the max retry count was reached.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSystemStatsProbeRespTxOctets		1.3.6.1.4.1.388.6.16.2.5.1.10
The number of octets successfully transmitted in Probe Response packets. (For example, the octets in a Probe Response that is transmitted twice - one retry - only counts once in this sum).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalRfSum		1.3.6.1.4.1.388.6.16.2.6
OBJECT IDENTIFIER

ccPortalStatsTable		1.3.6.1.4.1.388.6.16.2.6.1
This table describes general statistics about packets sent/recieved via each Portal on the switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalStatsEntry

ccPortalStatsEntry		1.3.6.1.4.1.388.6.16.2.6.1.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalStatsEntry

ccPortalTxPktsUcast		1.3.6.1.4.1.388.6.16.2.6.1.1.1
Count of unicast packets sent via the Radio
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsUcast		1.3.6.1.4.1.388.6.16.2.6.1.1.2
Count of unicast packets received via the Radio.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsNUcast		1.3.6.1.4.1.388.6.16.2.6.1.1.3
Count of non-unicast (broadcast & multicast) packets received via the Radio
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsUcast		1.3.6.1.4.1.388.6.16.2.6.1.1.4
Count of unicast octets sent via the Radio
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsUcast		1.3.6.1.4.1.388.6.16.2.6.1.1.5
Count of unicast octets received via the Radio
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsNUcast		1.3.6.1.4.1.388.6.16.2.6.1.1.6
Count of non-unicast (broadcast & multicast) octets received via the Radio
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxUndecryptablePkts		1.3.6.1.4.1.388.6.16.2.6.1.1.7
Count of packets received via the Radio that could not be decrypted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalLastActivity		1.3.6.1.4.1.388.6.16.2.6.1.1.8
A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received) via the Radio
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccPortalRxPktsTable		1.3.6.1.4.1.388.6.16.2.6.2
For each MU serviced by the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalRxPktsEntry

ccPortalRxPktsEntry		1.3.6.1.4.1.388.6.16.2.6.2.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalRxPktsEntry

ccPortalRxPktsAt1Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.1
Number of pkts received via this Radio at 1 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt2Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.2
Number of pkts received via this Radio at 2 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt5pt5Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.3
Number of pkts received via this Radio at 5.5 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt6Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.4
Number of pkts received via this Radio at 6 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt9Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.5
Number of pkts received via this Portal at 9 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt11Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.6
Number of pkts received via this Radio at 11 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt12Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.7
Number of pkts received via this Radio at 12 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt18Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.8
Number of pkts received via this Radio at 18 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt22Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.9
Number of pkts received via this Radio at 22 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt24Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.10
Number of pkts received via this Radio at 24 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt36Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.11
Number of pkts received via this Radio at 36 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt48Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.12
Number of pkts received via this Radio at 48 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxPktsAt54Mb		1.3.6.1.4.1.388.6.16.2.6.2.1.13
Number of pkts received via this Radio at 54 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsTable		1.3.6.1.4.1.388.6.16.2.6.3
For each MU serviced by the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalTxPktsEntry

ccPortalTxPktsEntry		1.3.6.1.4.1.388.6.16.2.6.3.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalTxPktsEntry

ccPortalTxPktsAt1Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.1
Number of pkts transmitted via this Radio at 1 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt2Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.2
Number of pkts transmitted via this Radio at 2 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt5pt5Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.3
Number of pkts transmitted via this Radio at 5.5 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt6Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.4
Number of pkts transmitted via this Radio at 6 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt9Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.5
Number of pkts transmitted via this Radio at 9 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt11Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.6
Number of pkts transmitted via this Radio at 11 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt12Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.7
Number of pkts transmitted via this Radio at 12 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt18Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.8
Number of pkts transmitted via this Radio at 18 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt22Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.9
Number of pkts transmitted via this Radio at 22 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt24Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.10
Number of pkts transmitted via this Radio at 24 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt36Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.11
Number of pkts transmitted via this Radio at 36 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt48Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.12
Number of pkts transmitted via this Radio at 48 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxPktsAt54Mb		1.3.6.1.4.1.388.6.16.2.6.3.1.13
Number of pkts transmitted via this Radio at 54 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsTable		1.3.6.1.4.1.388.6.16.2.6.4
For each Portal on this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalRxOctetsEntry

ccPortalRxOctetsEntry		1.3.6.1.4.1.388.6.16.2.6.4.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalRxOctetsEntry

ccPortalRxOctetsAt1Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.1
Number of octets received via this Radio at 1 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt2Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.2
Number of octets received via this Radio at 2 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt5pt5Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.3
Number of octets received via this Radio at 5.5 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt6Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.4
Number of octets received via this Radio at 6 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt9Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.5
Number of octets received via this Radio at 9 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt11Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.6
Number of octets received via this Radio at 11 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt12Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.7
Number of octets received via this Radio at 12 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt18Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.8
Number of octets received via this Radio at 18 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt22Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.9
Number of octets received via this Radio at 22 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt24Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.10
Number of octets received via this Radio at 24 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt36Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.11
Number of octets received via this Radio at 36 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt48Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.12
Number of octets received via this Radio at 48 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalRxOctetsAt54Mb		1.3.6.1.4.1.388.6.16.2.6.4.1.13
Number of octets received via this Radio at 54 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsTable		1.3.6.1.4.1.388.6.16.2.6.5
For each Portal on this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalTxOctetsEntry

ccPortalTxOctetsEntry		1.3.6.1.4.1.388.6.16.2.6.5.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalTxOctetsEntry

ccPortalTxOctetsAt1Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.1
Number octets transmitted via this Radio at 1 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt2Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.2
Number octets transmitted via this Radio at 2 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt5pt5Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.3
Number octets transmitted via this Radio at 5.5 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt6Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.4
Number octets transmitted via this Radio at 6 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt9Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.5
Number octets transmitted via this Radio at 9 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt11Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.6
Number octets transmitted via this Radio at 11 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt12Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.7
Number octets transmitted via this Radio at 12 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt18Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.8
Number octets transmitted via this Radio at 18 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt22Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.9
Number octets transmitted via this Radio at 22 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt24Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.10
Number octets transmitted via this Radio at 24 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt36Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.11
Number octets transmitted via this Radio at 36 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt48Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.12
Number octets transmitted via this Radio at 48 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxOctetsAt54Mb		1.3.6.1.4.1.388.6.16.2.6.5.1.13
Number octets transmitted via this Radio at 54 Mbps.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPktsTable		1.3.6.1.4.1.388.6.16.2.6.6
For each Portal on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalTxRetriesPktsEntry

ccPortalTxRetriesPktsEntry		1.3.6.1.4.1.388.6.16.2.6.6.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalTxRetriesPktsEntry

ccPortalTxRetriesPktsNone		1.3.6.1.4.1.388.6.16.2.6.6.1.1
Number of pkts successfully transmitted via this Radio with no retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts01		1.3.6.1.4.1.388.6.16.2.6.6.1.2
Number of pkts successfully transmitted via this Radio with exactly 1 retry.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts02		1.3.6.1.4.1.388.6.16.2.6.6.1.3
Number of pkts successfully transmitted via this Radio with exactly 2 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts03		1.3.6.1.4.1.388.6.16.2.6.6.1.4
Number of pkts successfully transmitted via this Radio with exactly 3 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts04		1.3.6.1.4.1.388.6.16.2.6.6.1.5
Number of pkts successfully transmitted via this Radio with exactly 4 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts05		1.3.6.1.4.1.388.6.16.2.6.6.1.6
Number of pkts successfully transmitted via this Radio with exactly 5 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts06		1.3.6.1.4.1.388.6.16.2.6.6.1.7
Number of pkts successfully transmitted via this Radio with exactly 6 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts07		1.3.6.1.4.1.388.6.16.2.6.6.1.8
Number of pkts successfully transmitted via this Radio with exactly 7 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts08		1.3.6.1.4.1.388.6.16.2.6.6.1.9
Number of pkts successfully transmitted via this Radio with exactly 8 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts09		1.3.6.1.4.1.388.6.16.2.6.6.1.10
Number of pkts successfully transmitted via this Radio with exactly 9 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts10		1.3.6.1.4.1.388.6.16.2.6.6.1.11
Number of pkts successfully transmitted via this Radio with exactly 10 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts11		1.3.6.1.4.1.388.6.16.2.6.6.1.12
Number of pkts successfully transmitted via this Radio with exactly 11 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts12		1.3.6.1.4.1.388.6.16.2.6.6.1.13
Number of pkts successfully transmitted via this Radio with exactly 12 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts13		1.3.6.1.4.1.388.6.16.2.6.6.1.14
Number of pkts successfully transmitted via this Radio with exactly 13 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts14		1.3.6.1.4.1.388.6.16.2.6.6.1.15
Number of pkts successfully transmitted via this Radio with exactly 14 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPkts15		1.3.6.1.4.1.388.6.16.2.6.6.1.16
Number of pkts successfully transmitted via this Radio with exactly 15 retries.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesPktsFailed		1.3.6.1.4.1.388.6.16.2.6.6.1.17
Number of pkts that never were successfully transmitted to via this Portal because the max retry count was exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctetsTable		1.3.6.1.4.1.388.6.16.2.6.7
For each Portal on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalTxRetriesOctetsEntry

ccPortalTxRetriesOctetsEntry		1.3.6.1.4.1.388.6.16.2.6.7.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalTxRetriesOctetsEntry

ccPortalTxRetriesOctetsNone		1.3.6.1.4.1.388.6.16.2.6.7.1.1
Number of octets successfully transmitted via this Radio with no retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets01		1.3.6.1.4.1.388.6.16.2.6.7.1.2
Number of octets successfully transmitted via this Radio with exactly 1 retry.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets02		1.3.6.1.4.1.388.6.16.2.6.7.1.3
Number of octets successfully transmitted via this Radio with exactly 2 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets03		1.3.6.1.4.1.388.6.16.2.6.7.1.4
Number of octets successfully transmitted via this Radio with exactly 3 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets04		1.3.6.1.4.1.388.6.16.2.6.7.1.5
Number of octets successfully transmitted via this Radio with exactly 4 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets05		1.3.6.1.4.1.388.6.16.2.6.7.1.6
Number of octets successfully transmitted via this Radio with exactly 5 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets06		1.3.6.1.4.1.388.6.16.2.6.7.1.7
Number of octets successfully transmitted via this Radio with exactly 6 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets07		1.3.6.1.4.1.388.6.16.2.6.7.1.8
Number of octets successfully transmitted via this Radio with exactly 7 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets08		1.3.6.1.4.1.388.6.16.2.6.7.1.9
Number of octets successfully transmitted via this Radio with exactly 8 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets09		1.3.6.1.4.1.388.6.16.2.6.7.1.10
Number of octets successfully transmitted via this Radio with exactly 9 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets10		1.3.6.1.4.1.388.6.16.2.6.7.1.11
Number of octets successfully transmitted via this Radio with exactly 10 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets11		1.3.6.1.4.1.388.6.16.2.6.7.1.12
Number of octets successfully transmitted via this Radio with exactly 11 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets12		1.3.6.1.4.1.388.6.16.2.6.7.1.13
Number of octets successfully transmitted via this Radio with exactly 12 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets13		1.3.6.1.4.1.388.6.16.2.6.7.1.14
Number of octets successfully transmitted via this Radio with exactly 13 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets14		1.3.6.1.4.1.388.6.16.2.6.7.1.15
Number of octets successfully transmitted via this Radio with exactly 14 retries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctets15		1.3.6.1.4.1.388.6.16.2.6.7.1.16
Number of octets successfully transmitted via this Radio with exactly 15 retries.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalTxRetriesOctetsFailed		1.3.6.1.4.1.388.6.16.2.6.7.1.17
Number of octets that never were successfully transmitted to via this Portal because the max retry count was exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalSigStatsTable		1.3.6.1.4.1.388.6.16.2.6.8
This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each Portal on the switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalSigStatsEntry

ccPortalSigStatsEntry		1.3.6.1.4.1.388.6.16.2.6.8.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalSigStatsEntry

ccPortalSigStatsNumPkts		1.3.6.1.4.1.388.6.16.2.6.8.1.1
Total packets received via the Radio included in all the other counters reported in this row.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccPortalSigStatsSignalBest		1.3.6.1.4.1.388.6.16.2.6.8.1.2
The best Signal value seen from the Radio so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsSignalWorst		1.3.6.1.4.1.388.6.16.2.6.8.1.3
The worst Signal value seen from the Radio so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsSignalSum		1.3.6.1.4.1.388.6.16.2.6.8.1.4
A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Radio Note that this value is normally a negative value ranging from -10dBm to -80dBm. It is possible for this value to be positive, but that would be rare, and would signal an exceptionally strong signal. (This value divided by ccPortalSigStatsNumPkts yields the average Signal value for all packets received from this MU).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsSignalSumSquares		1.3.6.1.4.1.388.6.16.2.6.8.1.5
A sum of the squares of each Signal value calculated for packets received via this Radio Unlike _SignalSum, this value is never negative, since the square of a negative number is a positive. (This value can be used to calculate the standard deviation for Signal values calculated for packets from this Portal).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccPortalSigStatsSignalMostRecent		1.3.6.1.4.1.388.6.16.2.6.8.1.6
The best Signal value seen from the Radio so far. (Remember that a -20dBm Signal is better than -60dBm). This value does not make sense when ccPortalSigStatsNumPkts equals to 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsNoiseBest		1.3.6.1.4.1.388.6.16.2.6.8.1.7
The best Noise value seen from the Radio so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsNoiseWorst		1.3.6.1.4.1.388.6.16.2.6.8.1.8
The worst Noise value seen from the Radio so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsNoiseSum		1.3.6.1.4.1.388.6.16.2.6.8.1.9
A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets received via this Radio Like _SignalSum, this value is normally a negative value. (This value divided by ccPortalSigStatsNumPkts yields the average Noise value for all packets received from this MU).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsNoiseSumSquares		1.3.6.1.4.1.388.6.16.2.6.8.1.10
A sum of the squares of each Noise value calculated for packets received via this Radio As with _SignalSumSquares, this value is never negative. (This value can be used to calculate the standard deviation for Noise values calculated for packets from this Portal).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccPortalSigStatsNoiseMostRecent		1.3.6.1.4.1.388.6.16.2.6.8.1.11
The best Noise value seen from the Radio so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccPortalSigStatsNumPkts equals to 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsSnrBest		1.3.6.1.4.1.388.6.16.2.6.8.1.12
The best SNR value seen from the Radio so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsSnrWorst		1.3.6.1.4.1.388.6.16.2.6.8.1.13
The worst SNR value seen from the Radio so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSigStatsSnrSum		1.3.6.1.4.1.388.6.16.2.6.8.1.14
A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received via this Radio Unlike _Signal and _Noise, this value is never negative. (This value divided by ccPortalSigStatsNumPkts yields the average SNR value for all packets received from this MU).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccPortalSigStatsSnrSumSquares		1.3.6.1.4.1.388.6.16.2.6.8.1.15
A sum of the squares of each SNR value calculated for packets received via this Radio This value is never negative. (This value can be used to calculate the standard deviation for SNR values calculated for packets from this Portal).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccPortalSigStatsSnrMostRecent		1.3.6.1.4.1.388.6.16.2.6.8.1.16
The best SNR value seen from the Radio so far. (Remember that +30dBm SNR is better than +20dBm). This value does not make sense when ccPortalSigStatsNumPkts equals to 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsShortTable		1.3.6.1.4.1.388.6.16.2.6.9
Averages and rates calculated over the SHORT window for each Portal.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalSumStatsShortEntry

ccPortalSumStatsShortEntry		1.3.6.1.4.1.388.6.16.2.6.9.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalSumStatsShortEntry

ccPortalSumStatsShortTimestamp		1.3.6.1.4.1.388.6.16.2.6.9.1.1
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccPortalSumStatsShortNumPkts		1.3.6.1.4.1.388.6.16.2.6.9.1.2
The number of packets used to calculate the statistics in this window.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsShortPktsPerSec100		1.3.6.1.4.1.388.6.16.2.6.9.1.3
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsShortPktsPerSecTx100		1.3.6.1.4.1.388.6.16.2.6.9.1.4
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsShortPktsPerSecRx100		1.3.6.1.4.1.388.6.16.2.6.9.1.5
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsShortThroughput		1.3.6.1.4.1.388.6.16.2.6.9.1.6
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsShortThroughputTx		1.3.6.1.4.1.388.6.16.2.6.9.1.7
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsShortThroughputRx		1.3.6.1.4.1.388.6.16.2.6.9.1.8
Actual number of bits RX over the window, divided by the number of seconds in the window.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsShortAvgBitSpeed		1.3.6.1.4.1.388.6.16.2.6.9.1.9
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsShortAvgMuSignal		1.3.6.1.4.1.388.6.16.2.6.9.1.10
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsShortAvgMuNoise		1.3.6.1.4.1.388.6.16.2.6.9.1.11
The average of all noise values over the window.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsShortAvgMuSnr		1.3.6.1.4.1.388.6.16.2.6.9.1.12
The average of all SNR values over the window.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsShortPp10kNUcastPkts		1.3.6.1.4.1.388.6.16.2.6.9.1.13
Ratio of packets that were NOT unicast. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsShortPp10kTxWithRetries		1.3.6.1.4.1.388.6.16.2.6.9.1.14
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsShortPp10kTxMaxRetries		1.3.6.1.4.1.388.6.16.2.6.9.1.15
Ratio of TX packets that were dropped due to excessive. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsShortTxAvgRetries100		1.3.6.1.4.1.388.6.16.2.6.9.1.16
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00).
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsShortPp10kRxUndecrypt		1.3.6.1.4.1.388.6.16.2.6.9.1.17
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsShortTotalMus		1.3.6.1.4.1.388.6.16.2.6.9.1.18
The total number of MUs associated to the given Radio
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

ccPortalSumStatsShortPp10kRfUtil		1.3.6.1.4.1.388.6.16.2.6.9.1.19
The approximate utilization of the Portal's RF port. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsShortPp10kDropped		1.3.6.1.4.1.388.6.16.2.6.9.1.20
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. Calculated as an average for all WLANs implemented on this Portal. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsLongTable		1.3.6.1.4.1.388.6.16.2.6.10
Averages and rates calculated over the LONG window for each Portal. (Refer to ccPortalSumStatsShortTable for descriptions).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalSumStatsLongEntry

ccPortalSumStatsLongEntry		1.3.6.1.4.1.388.6.16.2.6.10.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalSumStatsLongEntry

ccPortalSumStatsLongTimestamp		1.3.6.1.4.1.388.6.16.2.6.10.1.1
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccPortalSumStatsLongNumPkts		1.3.6.1.4.1.388.6.16.2.6.10.1.2
The number of packets used to calculate the statistics in this window
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsLongPktsPerSec100		1.3.6.1.4.1.388.6.16.2.6.10.1.3
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsLongPktsPerSecTx100		1.3.6.1.4.1.388.6.16.2.6.10.1.4
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsLongPktsPerSecRx100		1.3.6.1.4.1.388.6.16.2.6.10.1.5
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsLongThroughput		1.3.6.1.4.1.388.6.16.2.6.10.1.6
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries)
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsLongThroughputTx		1.3.6.1.4.1.388.6.16.2.6.10.1.7
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsLongThroughputRx		1.3.6.1.4.1.388.6.16.2.6.10.1.8
Actual number of bits RX over the window, divided by the number of seconds in the window.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsLongAvgBitSpeed		1.3.6.1.4.1.388.6.16.2.6.10.1.9
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccPortalSumStatsLongAvgMuSignal		1.3.6.1.4.1.388.6.16.2.6.10.1.10
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsLongAvgMuNoise		1.3.6.1.4.1.388.6.16.2.6.10.1.11
The average of all noise values over the window.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsLongAvgMuSnr		1.3.6.1.4.1.388.6.16.2.6.10.1.12
The average of all SNR values over the window.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalSumStatsLongPp10kNUcastPkts		1.3.6.1.4.1.388.6.16.2.6.10.1.13
Ratio of packets that were NOT unicast. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsLongPp10kTxWithRetries		1.3.6.1.4.1.388.6.16.2.6.10.1.14
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsLongPp10kTxMaxRetries		1.3.6.1.4.1.388.6.16.2.6.10.1.15
Ratio of TX packets that were dropped due to excessive. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsLongTxAvgRetries100		1.3.6.1.4.1.388.6.16.2.6.10.1.16
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00)
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccPortalSumStatsLongPp10kRxUndecrypt		1.3.6.1.4.1.388.6.16.2.6.10.1.17
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsLongTotalMus		1.3.6.1.4.1.388.6.16.2.6.10.1.18
The total number of MUs associated to the given Radio
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

ccPortalSumStatsLongPp10kRfUtil		1.3.6.1.4.1.388.6.16.2.6.10.1.19
The approximate utilization of the Portal's RF port. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccPortalSumStatsLongPp10kDropped		1.3.6.1.4.1.388.6.16.2.6.10.1.20
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. Calculated as an average for all WLANs implemented on this Portal. Expressed as parts-per-10000.
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMus		1.3.6.1.4.1.388.6.16.3
OBJECT IDENTIFIER

ccMuInfoTable		1.3.6.1.4.1.388.6.16.3.1
This table describes general information about each MU serviced by the switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuInfoEntry

ccMuInfoEntry		1.3.6.1.4.1.388.6.16.3.1.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuInfoEntry

ccMuMac		1.3.6.1.4.1.388.6.16.3.1.1.1
MAC address of the MU.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ccMuWlanIndex		1.3.6.1.4.1.388.6.16.3.1.1.2
(Reserved for future implementation).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..63

ccMuWlanName		1.3.6.1.4.1.388.6.16.3.1.1.3
The name of the WLAN this MU is associated to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuIsDataReady		1.3.6.1.4.1.388.6.16.3.1.1.4
This value is true if the WS5000 is ready to forward/switch packets to/from this MU, (internally called the 'data ready' state). Otherwise this value is false.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccMuPortalIndex		1.3.6.1.4.1.388.6.16.3.1.1.5
The index of the entry in the PortalTable to which this MU is associated.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..63

ccMuPortalMac		1.3.6.1.4.1.388.6.16.3.1.1.6
The MAC address of the Portal to which this MU is associated.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuSymbolRogueApEna		1.3.6.1.4.1.388.6.16.3.1.1.7
If true, this MU supports Symbol's Rogue AP detection assist algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ccMuIpAddr		1.3.6.1.4.1.388.6.16.3.1.1.8
IP address of the MU.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ccMuType		1.3.6.1.4.1.388.6.16.3.1.1.9
Type of the MU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	data(1), voice(2), accessPoint(3)

ccMuRadioType		1.3.6.1.4.1.388.6.16.3.1.1.10
Radio type of the MU.
Status: current	Access: read-only
OBJECT-TYPE
	RadioType

ccMuSupportedRates		1.3.6.1.4.1.388.6.16.3.1.1.11
A bit-mask of rates supported by this MU.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	supports1Mb(0), supports2Mb(1), supports5dot5Mb(2), supports6Mb(3), supports9Mb(4), supports11Mb(5), supports12Mb(6), supports18Mb(7), supports22Mb(8), supports24Mb(9), supports36Mb(10), supports48Mb(11), supports54Mb(12)

ccMuPowerMode		1.3.6.1.4.1.388.6.16.3.1.1.12
Power-mode implemented by the MU. A MU's status will constantly switch between PSP and CAM mode when it is in PSP mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	continuousAccessMode(1), powerSavePolling(2)

ccMuAuthenticationMethod		1.3.6.1.4.1.388.6.16.3.1.1.13
Authentication method implemented by the MU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), eap802dot1x(2), kerberos(3)

ccMuEncryptionMethod		1.3.6.1.4.1.388.6.16.3.1.1.14
Encryption method implemented by the MU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), wep40(2), wep128(3), keyGuardMCM(4), wpaTKIP(5), wpa2AesCcmp(6)

ccMuVlanId		1.3.6.1.4.1.388.6.16.3.1.1.15
The VLAN that this MU is assigned to.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..31

ccMuStatsTable		1.3.6.1.4.1.388.6.16.3.2
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuStatsEntry

ccMuStatsEntry		1.3.6.1.4.1.388.6.16.3.2.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuStatsEntry

ccMuTxPktsUcast		1.3.6.1.4.1.388.6.16.3.2.1.1
The number of Unicast packets transmitted to the MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsUcast		1.3.6.1.4.1.388.6.16.3.2.1.2
The number of Unicast packets received from the MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsNUcast		1.3.6.1.4.1.388.6.16.3.2.1.3
The number of Non unicast packets received from a MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsUcast		1.3.6.1.4.1.388.6.16.3.2.1.4
The number of unicast bytes transmitted to the MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsUcast		1.3.6.1.4.1.388.6.16.3.2.1.5
The number of unicast bytes received from an MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsNUcast		1.3.6.1.4.1.388.6.16.3.2.1.6
The number of Non Unicast Bytes received from an MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxUndecryptablePkts		1.3.6.1.4.1.388.6.16.3.2.1.7
The number of undecryptable packets received from an MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxRssiNumPkts		1.3.6.1.4.1.388.6.16.3.2.1.8
The number of packets received from an MU for which all the signal related claculations in this table are done
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxRssiSum		1.3.6.1.4.1.388.6.16.3.2.1.9
The sum of Signal strength values of all the packets received from this MU
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuRxRssiSumSquares		1.3.6.1.4.1.388.6.16.3.2.1.10
The sumsq of Signal strength of all the packets received from this MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccMuRxRssiMostRecent		1.3.6.1.4.1.388.6.16.3.2.1.11
The most recent value of the signal strength received from this MU
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ccMuLastActivity		1.3.6.1.4.1.388.6.16.3.2.1.12
The time stamp at which the last activity was seen fromn this MU
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccMuRxPktsTable		1.3.6.1.4.1.388.6.16.3.3
The Number of Packets received at various rates from the Moblie Unit
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuRxPktsEntry

ccMuRxPktsEntry		1.3.6.1.4.1.388.6.16.3.3.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuRxPktsEntry

ccMuRxPktsAt1Mb		1.3.6.1.4.1.388.6.16.3.3.1.1
The number of packets received from the Mobile Unit at 1 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt2Mb		1.3.6.1.4.1.388.6.16.3.3.1.2
The number of packets received from the Mobile Unit at 2 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt5pt5Mb		1.3.6.1.4.1.388.6.16.3.3.1.3
The number of packets received from the Mobile Unit at 5.5 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt6Mb		1.3.6.1.4.1.388.6.16.3.3.1.4
The number of packets received from the Mobile Unit at 6 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt9Mb		1.3.6.1.4.1.388.6.16.3.3.1.5
The number of packets received from the Mobile Unit at 9 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt11Mb		1.3.6.1.4.1.388.6.16.3.3.1.6
The number of packets received from the Mobile Unit at 11 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt12Mb		1.3.6.1.4.1.388.6.16.3.3.1.7
The number of packets received from the Mobile Unit at 12 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt18Mb		1.3.6.1.4.1.388.6.16.3.3.1.8
The number of packets received from the Mobile Unit at 18 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt22Mb		1.3.6.1.4.1.388.6.16.3.3.1.9
The number of packets received from the Mobile Unit at 22 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt24Mb		1.3.6.1.4.1.388.6.16.3.3.1.10
The number of packets received from the Mobile Unit at 24 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt36Mb		1.3.6.1.4.1.388.6.16.3.3.1.11
The number of packets received from the Mobile Unit at 36 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt48Mb		1.3.6.1.4.1.388.6.16.3.3.1.12
The number of packets received from the Mobile Unit at 48 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxPktsAt54Mb		1.3.6.1.4.1.388.6.16.3.3.1.13
The number of packets received from the Mobile Unit at 54 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsTable		1.3.6.1.4.1.388.6.16.3.4
The Number of Packets transmitted to the Moblie Unit at various rates
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuTxPktsEntry

ccMuTxPktsEntry		1.3.6.1.4.1.388.6.16.3.4.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuTxPktsEntry

ccMuTxPktsAt1Mb		1.3.6.1.4.1.388.6.16.3.4.1.1
The number of packets transmitted to the Mobile Unit at 1 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt2Mb		1.3.6.1.4.1.388.6.16.3.4.1.2
The number of packets transmitted to the Mobile Unit at 2 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt5pt5Mb		1.3.6.1.4.1.388.6.16.3.4.1.3
The number of packets transmitted to the Mobile Unit at 5.5 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt6Mb		1.3.6.1.4.1.388.6.16.3.4.1.4
The number of packets transmitted to the Mobile Unit at 6 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt9Mb		1.3.6.1.4.1.388.6.16.3.4.1.5
The number of packets transmitted to the Mobile Unit at 9 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt11Mb		1.3.6.1.4.1.388.6.16.3.4.1.6
The number of packets transmitted to the Mobile Unit at 11 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt12Mb		1.3.6.1.4.1.388.6.16.3.4.1.7
The number of packets transmitted to the Mobile Unit at 12 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt18Mb		1.3.6.1.4.1.388.6.16.3.4.1.8
The number of packets transmitted to the Mobile Unit at 18 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt22Mb		1.3.6.1.4.1.388.6.16.3.4.1.9
The number of packets transmitted to the Mobile Unit at 22 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt24Mb		1.3.6.1.4.1.388.6.16.3.4.1.10
The number of packets transmitted to the Mobile Unit at 24 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt36Mb		1.3.6.1.4.1.388.6.16.3.4.1.11
The number of packets transmitted to the Mobile Unit at 36 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt48Mb		1.3.6.1.4.1.388.6.16.3.4.1.12
The number of packets transmitted to the Mobile Unit at 48 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxPktsAt54Mb		1.3.6.1.4.1.388.6.16.3.4.1.13
The number of packets transmitted to the Mobile Unit at 54 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsTable		1.3.6.1.4.1.388.6.16.3.5
The number of Bytes received from the mU at various rates
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuRxOctetsEntry

ccMuRxOctetsEntry		1.3.6.1.4.1.388.6.16.3.5.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuRxOctetsEntry

ccMuRxOctetsAt1Mb		1.3.6.1.4.1.388.6.16.3.5.1.1
The number of bytes received from the Mobile Unit at 1 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt2Mb		1.3.6.1.4.1.388.6.16.3.5.1.2
The number of bytes received from the Mobile Unit at 2 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt5pt5Mb		1.3.6.1.4.1.388.6.16.3.5.1.3
The number of bytes received from the Mobile Unit at 5.5 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt6Mb		1.3.6.1.4.1.388.6.16.3.5.1.4
The number of bytes received from the Mobile Unit at 6 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt9Mb		1.3.6.1.4.1.388.6.16.3.5.1.5
The number of bytes received from the Mobile Unit at 9 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt11Mb		1.3.6.1.4.1.388.6.16.3.5.1.6
The number of bytes received from the Mobile Unit at 11 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt12Mb		1.3.6.1.4.1.388.6.16.3.5.1.7
The number of bytes received from the Mobile Unit at 12 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt18Mb		1.3.6.1.4.1.388.6.16.3.5.1.8
The number of bytes received from the Mobile Unit at 18 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt22Mb		1.3.6.1.4.1.388.6.16.3.5.1.9
The number of bytes received from the Mobile Unit at 22 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt24Mb		1.3.6.1.4.1.388.6.16.3.5.1.10
The number of bytes received from the Mobile Unit at 24 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt36Mb		1.3.6.1.4.1.388.6.16.3.5.1.11
The number of bytes received from the Mobile Unit at 36 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt48Mb		1.3.6.1.4.1.388.6.16.3.5.1.12
The number of bytes received from the Mobile Unit at 48 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuRxOctetsAt54Mb		1.3.6.1.4.1.388.6.16.3.5.1.13
The number of bytes received from the Mobile Unit at 54 Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsTable		1.3.6.1.4.1.388.6.16.3.6
The number of bytes transmitted to the MU at various rate
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuTxOctetsEntry

ccMuTxOctetsEntry		1.3.6.1.4.1.388.6.16.3.6.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuTxOctetsEntry

ccMuTxOctetsAt1Mb		1.3.6.1.4.1.388.6.16.3.6.1.1
The number of bytes transmitted to the Mobile Unit at 1 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt2Mb		1.3.6.1.4.1.388.6.16.3.6.1.2
The number of bytes transmitted to the Mobile Unit at 2 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt5pt5Mb		1.3.6.1.4.1.388.6.16.3.6.1.3
The number of bytes transmitted to the Mobile Unit at 5.5 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt6Mb		1.3.6.1.4.1.388.6.16.3.6.1.4
The number of bytes transmitted to the Mobile Unit at 6 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt9Mb		1.3.6.1.4.1.388.6.16.3.6.1.5
The number of bytes transmitted to the Mobile Unit at 9 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt11Mb		1.3.6.1.4.1.388.6.16.3.6.1.6
The number of bytes transmitted to the Mobile Unit at 11 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt12Mb		1.3.6.1.4.1.388.6.16.3.6.1.7
The number of bytes transmitted to the Mobile Unit at 12 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt18Mb		1.3.6.1.4.1.388.6.16.3.6.1.8
The number of bytes transmitted to the Mobile Unit at 18 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt22Mb		1.3.6.1.4.1.388.6.16.3.6.1.9
The number of bytes transmitted to the Mobile Unit at 22 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt24Mb		1.3.6.1.4.1.388.6.16.3.6.1.10
The number of bytes transmitted to the Mobile Unit at 24 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt36Mb		1.3.6.1.4.1.388.6.16.3.6.1.11
The number of bytes transmitted to the Mobile Unit at 36 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt48Mb		1.3.6.1.4.1.388.6.16.3.6.1.12
The number of bytes transmitted to the Mobile Unit at 48 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxOctetsAt54Mb		1.3.6.1.4.1.388.6.16.3.6.1.13
The number of bytes transmitted to the Mobile Unit at 54 Mbps (does not include re-tries)
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesTable		1.3.6.1.4.1.388.6.16.3.7
The number of packets transmitted to the MU at various retries
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuTxRetriesEntry

ccMuTxRetriesEntry		1.3.6.1.4.1.388.6.16.3.7.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuTxRetriesEntry

ccMuTxRetriesNone		1.3.6.1.4.1.388.6.16.3.7.1.1
The number of bytes transmitted to the Mobile Unit with no retry
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries01		1.3.6.1.4.1.388.6.16.3.7.1.2
The number of bytes transmitted to the Mobile Unit with 1 retry
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries02		1.3.6.1.4.1.388.6.16.3.7.1.3
The number of bytes transmitted to the Mobile Unit with 2 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries03		1.3.6.1.4.1.388.6.16.3.7.1.4
The number of bytes transmitted to the Mobile Unit with 3 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries04		1.3.6.1.4.1.388.6.16.3.7.1.5
The number of bytes transmitted to the Mobile Unit with 4 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries05		1.3.6.1.4.1.388.6.16.3.7.1.6
The number of bytes transmitted to the Mobile Unit with 5 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries06		1.3.6.1.4.1.388.6.16.3.7.1.7
The number of bytes transmitted to the Mobile Unit with 6 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries07		1.3.6.1.4.1.388.6.16.3.7.1.8
The number of bytes transmitted to the Mobile Unit with 7 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries08		1.3.6.1.4.1.388.6.16.3.7.1.9
The number of bytes transmitted to the Mobile Unit with 8 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries09		1.3.6.1.4.1.388.6.16.3.7.1.10
The number of bytes transmitted to the Mobile Unit with 9 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries10		1.3.6.1.4.1.388.6.16.3.7.1.11
The number of bytes transmitted to the Mobile Unit with 10 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries11		1.3.6.1.4.1.388.6.16.3.7.1.12
The number of bytes transmitted to the Mobile Unit with 11 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries12		1.3.6.1.4.1.388.6.16.3.7.1.13
The number of bytes transmitted to the Mobile Unit with 12 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries13		1.3.6.1.4.1.388.6.16.3.7.1.14
The number of bytes transmitted to the Mobile Unit with 13 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries14		1.3.6.1.4.1.388.6.16.3.7.1.15
The number of bytes transmitted to the Mobile Unit with 14 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetries15		1.3.6.1.4.1.388.6.16.3.7.1.16
The number of bytes transmitted to the Mobile Unit with 15 retries
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesFailed		1.3.6.1.4.1.388.6.16.3.7.1.17
The number of bytes that were not sent due to excess retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesTotal		1.3.6.1.4.1.388.6.16.3.7.1.18
A total sum of all retries across all packets sent to this MU. For example, if 4 packets have been sent, with the following number of retires: 2, 0, 5, gave-up, this value would be 2+0+5+16 = 23.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesMostRecent		1.3.6.1.4.1.388.6.16.3.7.1.19
The number of retries of the most recent transmission
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..16

ccMuLastMac		1.3.6.1.4.1.388.6.16.3.8
This scalar records the MAC address of the most recent MU to be Adopted, UnAdopted, or Denied.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuLastReason		1.3.6.1.4.1.388.6.16.3.9
This value notes the reason for the most-recent MU UnAdoption or Denial. Enum item associationFailed indicates that a key association field was missing, or a mismatch of supported rates, etc.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), aclViolation(2), timeout(3), associationFailed(4), authenticationFailedOn802dot1x(5), kerberosWrongUsername(6)

ccMuLastPortal		1.3.6.1.4.1.388.6.16.3.10
This value notes the reason for the most-recent MU UnAdoption or Denial.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuRfSum		1.3.6.1.4.1.388.6.16.3.100
OBJECT IDENTIFIER

ccMuTxRetriesOctetsTable		1.3.6.1.4.1.388.6.16.3.100.1
The number of packets transmitted from the MU at various retries
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuTxRetriesOctetsEntry

ccMuTxRetriesOctetsEntry		1.3.6.1.4.1.388.6.16.3.100.1.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuTxRetriesOctetsEntry

ccMuTxRetriesOctetsNone		1.3.6.1.4.1.388.6.16.3.100.1.1.1
The number of packets transmitted to the Mobile Unit with no retry
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets01		1.3.6.1.4.1.388.6.16.3.100.1.1.2
The number of packets transmitted to the Mobile Unit with 1 retry
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets02		1.3.6.1.4.1.388.6.16.3.100.1.1.3
The number of packets transmitted to the Mobile Unit with 2 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets03		1.3.6.1.4.1.388.6.16.3.100.1.1.4
The number of packets transmitted to the Mobile Unit with 3 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets04		1.3.6.1.4.1.388.6.16.3.100.1.1.5
The number of packets transmitted to the Mobile Unit with 4 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets05		1.3.6.1.4.1.388.6.16.3.100.1.1.6
The number of packets transmitted to the Mobile Unit with 5 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets06		1.3.6.1.4.1.388.6.16.3.100.1.1.7
The number of packets transmitted to the Mobile Unit with 6 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets07		1.3.6.1.4.1.388.6.16.3.100.1.1.8
The number of packets transmitted to the Mobile Unit with 7 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets08		1.3.6.1.4.1.388.6.16.3.100.1.1.9
The number of packets transmitted to the Mobile Unit with 8 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets09		1.3.6.1.4.1.388.6.16.3.100.1.1.10
The number of packets transmitted to the Mobile Unit with 9 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets10		1.3.6.1.4.1.388.6.16.3.100.1.1.11
The number of packets transmitted to the Mobile Unit with 10 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets11		1.3.6.1.4.1.388.6.16.3.100.1.1.12
The number of packets transmitted to the Mobile Unit with 11 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets12		1.3.6.1.4.1.388.6.16.3.100.1.1.13
The number of packets transmitted to the Mobile Unit with 12 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets13		1.3.6.1.4.1.388.6.16.3.100.1.1.14
The number of packets transmitted to the Mobile Unit with 13 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets14		1.3.6.1.4.1.388.6.16.3.100.1.1.15
The number of packets transmitted to the Mobile Unit with 14 retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctets15		1.3.6.1.4.1.388.6.16.3.100.1.1.16
The number of packets transmitted to the Mobile Unit with 15 retries
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

ccMuTxRetriesOctetsFailed		1.3.6.1.4.1.388.6.16.3.100.1.1.17
The number of packets that were not sent due to excess retries
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuSigStatsTable		1.3.6.1.4.1.388.6.16.3.100.2
The various signal strength information for this MU
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuSigStatsEntry

ccMuSigStatsEntry		1.3.6.1.4.1.388.6.16.3.100.2.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuSigStatsEntry

ccMuSigStatsNumPkts		1.3.6.1.4.1.388.6.16.3.100.2.1.1
The Number of Packets from the MU fro which the signal strength calculations shown in this table are done
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ccMuSigStatsSignalBest		1.3.6.1.4.1.388.6.16.3.100.2.1.2
The best value of the signal strength in Dbm
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsSignalWorst		1.3.6.1.4.1.388.6.16.3.100.2.1.3
The worst value of signal strength in dBm
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsSignalSum		1.3.6.1.4.1.388.6.16.3.100.2.1.4
The sum of signal strength of all the packets received from the MU
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsSignalSumSquares		1.3.6.1.4.1.388.6.16.3.100.2.1.5
The sum square of all the packets received from the MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccMuSigStatsSignalMostRecent		1.3.6.1.4.1.388.6.16.3.100.2.1.6
The most recent signal strength value received from the MU
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsNoiseBest		1.3.6.1.4.1.388.6.16.3.100.2.1.7
The best noise value heard by the Radio to which this MU is associated. Here Best value of Noise implies the the least noise value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsNoiseWorst		1.3.6.1.4.1.388.6.16.3.100.2.1.8
The worst value of the noise strength as received by the radio to which the MU is associated
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsNoiseSum		1.3.6.1.4.1.388.6.16.3.100.2.1.9
The sum of all noise samples received from the Radio t which the MU is associsated
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsNoiseSumSquares		1.3.6.1.4.1.388.6.16.3.100.2.1.10
The sumsq of all the noise samples received from the radio to which this MU is associated
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccMuSigStatsNoiseMostRecent		1.3.6.1.4.1.388.6.16.3.100.2.1.11
The strength of the most recent noise value heard from the radio to which this MU is associated
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsSnrBest		1.3.6.1.4.1.388.6.16.3.100.2.1.12
The best value of snr calculated for this MU
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsSnrWorst		1.3.6.1.4.1.388.6.16.3.100.2.1.13
The worst value of snr calculated for this MU
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSigStatsSnrSum		1.3.6.1.4.1.388.6.16.3.100.2.1.14
The sum of all the SNR values calculated for this MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccMuSigStatsSnrSumSquares		1.3.6.1.4.1.388.6.16.3.100.2.1.15
The sum squqre of all the SNR values calculated for this MU
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

ccMuSigStatsSnrMostRecent		1.3.6.1.4.1.388.6.16.3.100.2.1.16
The most recent value of the SNR calculated for this MU
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsShortTable		1.3.6.1.4.1.388.6.16.3.100.3
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuSumStatsShortEntry

ccMuSumStatsShortEntry		1.3.6.1.4.1.388.6.16.3.100.3.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuSumStatsShortEntry

ccMuSumStatsShortTimestamp		1.3.6.1.4.1.388.6.16.3.100.3.1.1
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccMuSumStatsShortNumPkts		1.3.6.1.4.1.388.6.16.3.100.3.1.2
The number of packets used to calculate the statistics in this window
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsShortPktsPerSec100		1.3.6.1.4.1.388.6.16.3.100.3.1.3
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsShortPktsPerSecTx100		1.3.6.1.4.1.388.6.16.3.100.3.1.4
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsShortPktsPerSecRx100		1.3.6.1.4.1.388.6.16.3.100.3.1.5
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsShortThroughput		1.3.6.1.4.1.388.6.16.3.100.3.1.6
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries)
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsShortThroughputTx		1.3.6.1.4.1.388.6.16.3.100.3.1.7
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsShortThroughputRx		1.3.6.1.4.1.388.6.16.3.100.3.1.8
Actual number of bits RX over the window, divided by the number of seconds in the window
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsShortAvgBitSpeed		1.3.6.1.4.1.388.6.16.3.100.3.1.9
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsShortAvgMuSignal		1.3.6.1.4.1.388.6.16.3.100.3.1.10
The average of all signal values over the window. NOTE: dBm are normally negative.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsShortAvgMuNoise		1.3.6.1.4.1.388.6.16.3.100.3.1.11
The average of all noise values over the window
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsShortAvgMuSnr		1.3.6.1.4.1.388.6.16.3.100.3.1.12
The average of all SNR values over the window
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsShortPp10kNUcastPkts		1.3.6.1.4.1.388.6.16.3.100.3.1.13
Ratio of packets that were NOT unicast to the total number of packets sent/received. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsShortPp10kTxWithRetries		1.3.6.1.4.1.388.6.16.3.100.3.1.14
Ratio of TX packets that experienced one or more retries to the total number of packets sent or received. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsShortPp10kDropped		1.3.6.1.4.1.388.6.16.3.100.3.1.15
Ratio of TX packets that were dropped due to excessive retries. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsShortTxAvgRetries100		1.3.6.1.4.1.388.6.16.3.100.3.1.16
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00).
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsShortPp10kRxUndecrypt		1.3.6.1.4.1.388.6.16.3.100.3.1.17
Ratio of RX packets that were undecryptable to the total number of packets received. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsLongTable		1.3.6.1.4.1.388.6.16.3.100.4
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuSumStatsLongEntry

ccMuSumStatsLongEntry		1.3.6.1.4.1.388.6.16.3.100.4.1
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuSumStatsLongEntry

ccMuSumStatsLongTimestamp		1.3.6.1.4.1.388.6.16.3.100.4.1.1
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ccMuSumStatsLongNumPkts		1.3.6.1.4.1.388.6.16.3.100.4.1.2
The number of packets used to calculate the statistics in this window
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsLongPktsPerSec100		1.3.6.1.4.1.388.6.16.3.100.4.1.3
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsLongPktsPerSecTx100		1.3.6.1.4.1.388.6.16.3.100.4.1.4
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsLongPktsPerSecRx100		1.3.6.1.4.1.388.6.16.3.100.4.1.5
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsLongThroughput		1.3.6.1.4.1.388.6.16.3.100.4.1.6
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries)
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsLongThroughputTx		1.3.6.1.4.1.388.6.16.3.100.4.1.7
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsLongThroughputRx		1.3.6.1.4.1.388.6.16.3.100.4.1.8
Actual number of bits RX over the window, divided by the number of seconds in the window
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsLongAvgBitSpeed		1.3.6.1.4.1.388.6.16.3.100.4.1.9
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ccMuSumStatsLongAvgMuSignal		1.3.6.1.4.1.388.6.16.3.100.4.1.10
The average of all signal values over the window. NOTE: dBm are normally negative.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsLongAvgMuNoise		1.3.6.1.4.1.388.6.16.3.100.4.1.11
The average of all noise values over the window
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsLongAvgMuSnr		1.3.6.1.4.1.388.6.16.3.100.4.1.12
The average of all SNR values over the window
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuSumStatsLongPp10kNUcastPkts		1.3.6.1.4.1.388.6.16.3.100.4.1.13
Ratio of packets that were NOT unicast to the total number of packets sent/received. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsLongPp10kTxWithRetries		1.3.6.1.4.1.388.6.16.3.100.4.1.14
Ratio of TX packets that experienced one or more retries to the total number of packets sent or received. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsLongPp10kDropped		1.3.6.1.4.1.388.6.16.3.100.4.1.15
Ratio of TX packets that were dropped due to excessive retries. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccMuSumStatsLongTxAvgRetries100		1.3.6.1.4.1.388.6.16.3.100.4.1.16
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00).
Status: current	Access: read-only
OBJECT-TYPE
	ScaleBy100

ccMuSumStatsLongPp10kRxUndecrypt		1.3.6.1.4.1.388.6.16.3.100.4.1.17
Ratio of RX packets that were undecryptable to the total number of packets received. Expressed as parts-per-10000
Status: current	Access: read-only
OBJECT-TYPE
	PartsPer10k

ccWME		1.3.6.1.4.1.388.6.18
OBJECT IDENTIFIER

ccWMEprofileTable		1.3.6.1.4.1.388.6.18.5
Description. Table for WME Profiles.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcWMEprofileEntry

ccWMEprofileEntry		1.3.6.1.4.1.388.6.18.5.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcWMEprofileEntry

ccWMEprofileIndex		1.3.6.1.4.1.388.6.18.5.1.1
Description. Simple Index 1...10
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..10

ccWMEprofilename		1.3.6.1.4.1.388.6.18.5.1.2
Description. WME Profile Name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

ccWMEprofileDesc		1.3.6.1.4.1.388.6.18.5.1.3
Description.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

ccWMEprofileAc1VoEcwmin		1.3.6.1.4.1.388.6.18.5.1.4
Description. WME Voice Access Category CWMin value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc1VoEcwmax		1.3.6.1.4.1.388.6.18.5.1.5
Description. WME Voice Access Category CWMax value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc1VoTxopLimit		1.3.6.1.4.1.388.6.18.5.1.6
Description. WME Voice Access Category Txopstime value.(B)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc1VoAgTxopLimit		1.3.6.1.4.1.388.6.18.5.1.7
Description. WME Voice Access Category Txopstime value.(A/G)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc1VoAifsn		1.3.6.1.4.1.388.6.18.5.1.8
Description. WME Voice Access Category Aifsn value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc2ViEcwmin		1.3.6.1.4.1.388.6.18.5.1.9
Description. WME Video Access Category CWMin value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc2ViEcwmax		1.3.6.1.4.1.388.6.18.5.1.10
Description. WME Video Access Category CWMax value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc2ViTxopLimit		1.3.6.1.4.1.388.6.18.5.1.11
Description. WME Video Access Category Txopstime value.(B)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc2ViAgTxopLimit		1.3.6.1.4.1.388.6.18.5.1.12
Description. WME Video Access Category Txopstime value.(A/G)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc2ViAifsn		1.3.6.1.4.1.388.6.18.5.1.13
Description. WME Video Access Category Aifsn value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc3BeEcwmin		1.3.6.1.4.1.388.6.18.5.1.14
Description. WME Best Effort Access Category CWMin value
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc3BeEcwmax		1.3.6.1.4.1.388.6.18.5.1.15
Description. WME Best Effort Access Category CWMax value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc3BeTxopLimit		1.3.6.1.4.1.388.6.18.5.1.16
Description. WME Best Effort Access Category Txopstime value. (B)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc3BeAgTxopLimit		1.3.6.1.4.1.388.6.18.5.1.17
Description. WME Best Effort Access Category Txopstime value.(A/G)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc3BeAifsn		1.3.6.1.4.1.388.6.18.5.1.18
Description. WME Best Effort Access Category Aifsn value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc4BkEcwmin		1.3.6.1.4.1.388.6.18.5.1.19
Description. WME Background Access Category CWMin value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc4BkEcwmax		1.3.6.1.4.1.388.6.18.5.1.20
Description. WME Background Access Category CWMax value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileAc4BkTxopLimit		1.3.6.1.4.1.388.6.18.5.1.21
Description. WME Background Access Category Txopstime value.(B)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc4BkAgTxopLimit		1.3.6.1.4.1.388.6.18.5.1.22
Description. WME Background Access Category Txopstime value.(A/G)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

ccWMEprofileAc4BkAifsn		1.3.6.1.4.1.388.6.18.5.1.23
Description. WME Background Access Category Aifsn value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

ccWMEprofileQosParam		1.3.6.1.4.1.388.6.18.5.1.24
Description. WME profile QosParam This is Read Only.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

ccWMEprofileRowStatus		1.3.6.1.4.1.388.6.18.5.1.25
Description. Used for row creation/deletion.
Status: current	Access: read-create
OBJECT-TYPE
	AbbrevRowStatus

ccPortalBeacon		1.3.6.1.4.1.388.6.19
OBJECT IDENTIFIER

ccPortalBeaconRptTable		1.3.6.1.4.1.388.6.19.5
Description. This table describes the signal values (in dBm) of beacons heard from other Portals Note that the 'neighbor' Portals reported may not be the geographically closest Portal, since other Portals which are nearer may not be on the same channel. This table is useful for determining if RF conditions between Portals have radically changed over time
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcPortalBeaconRptEntry

ccPortalBeaconRptEntry		1.3.6.1.4.1.388.6.19.5.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcPortalBeaconRptEntry

ccPortalBeaconRptPortalIndex		1.3.6.1.4.1.388.6.19.5.1.1
Description. The ccPortalTable:ccPortalIndex of the neighbor Portal that has been heard.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..255

ccPortalBeaconRptNumBeaconsHeard		1.3.6.1.4.1.388.6.19.5.1.2
Description. Number of beacons reported in this entry
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBeaconRptBest		1.3.6.1.4.1.388.6.19.5.1.3
Description. The strongest beacon signal strength heard since boot
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBeaconRptWorst		1.3.6.1.4.1.388.6.19.5.1.4
Description. The weakest beacon signal strength heard since boot
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBeaconRptSum		1.3.6.1.4.1.388.6.19.5.1.5
Description. The sum of all signal values heard
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBeaconRptSumSquares		1.3.6.1.4.1.388.6.19.5.1.6
Description. The sum of each signal value heard, squared before summing
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBeaconRptMostRecent		1.3.6.1.4.1.388.6.19.5.1.7
Description. The most-recent value of signal heard for a beacon
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccPortalBeaconRptLastHeard		1.3.6.1.4.1.388.6.19.5.1.8
Description. Snapshot of sysUpTime at the time the prior item(s) in this entry were last updated.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccPortalBeaconRpFinderMac		1.3.6.1.4.1.388.6.19.5.1.9
Description.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccPortalBeaconRpFoundMac		1.3.6.1.4.1.388.6.19.5.1.10
Description.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuProbeRptTable		1.3.6.1.4.1.388.6.19.6
Description. This table reports the signal strength of ProbeRequest packets heard from each MU by each Portal that heard them
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcMuProbeRptEntry

ccMuProbeRptEntry		1.3.6.1.4.1.388.6.19.6.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcMuProbeRptEntry

ccMuProbeRptSignalMostRecent		1.3.6.1.4.1.388.6.19.6.1.1
Description. The signal strength, (in dBm), of the most-recently heard ProbeRequest from the given MU, (specified by the primary index: ccMuMac), from the given Portal, (specified by the secondary index: ccPortalIndex). In the event that the given Portal hears more than one ProbeRequest from the MU in a short period of time, (say, around 1-3sec), only the strongest value is reported. (Such a case can occur when an MU is performing an active scan, and the Portal hears the ProbeRequests from the MU sent on on adjacent channels).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ccMuProbeRptLastHeard		1.3.6.1.4.1.388.6.19.6.1.2
Description. Snapshot of sysUpTime at the time the prior item(s) in this entry were last updated
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuProbeRptFinderMac		1.3.6.1.4.1.388.6.19.6.1.3
Description.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccMuProbeRptFoundMac		1.3.6.1.4.1.388.6.19.6.1.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccSensor		1.3.6.1.4.1.388.6.20
OBJECT IDENTIFIER

ccSensorList		1.3.6.1.4.1.388.6.20.1
List of Mac Address of all discovered sensors
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccApList		1.3.6.1.4.1.388.6.20.2
List of AP300s
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccSensorRevert		1.3.6.1.4.1.388.6.20.3
syntax : Mac address of AP300 of a sensor to revert
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccSensorConvert		1.3.6.1.4.1.388.6.20.4
syntax : Mac address of AP300 that is to be converted to a sensor
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ccSensorEnable		1.3.6.1.4.1.388.6.20.5
syntax : Enable(1)/Disable(0) Enable/Disable Sensor
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccApSensorTable		1.3.6.1.4.1.388.6.20.6
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CcApSensorEntry

ccApSensorEntry		1.3.6.1.4.1.388.6.20.6.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	CcApSensorEntry

ccApSensorIndex		1.3.6.1.4.1.388.6.20.6.1.1
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..30

ccApSensorMask		1.3.6.1.4.1.388.6.20.6.1.2
syntax : Subnet mask of the sensor
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccApSensorGateWay		1.3.6.1.4.1.388.6.20.6.1.3
syntax : Gate Way of the sensor
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccApSensorPrimary		1.3.6.1.4.1.388.6.20.6.1.4
syntax : Primary Server of the sensor
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccApSensorSecondary		1.3.6.1.4.1.388.6.20.6.1.5
syntax : Secondary Server of the sensor
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccApSensorDhcp		1.3.6.1.4.1.388.6.20.6.1.6
syntax : Enable(1)/Disable(0) Enable/Disable dhcp
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ccApSensorIpaddress		1.3.6.1.4.1.388.6.20.6.1.7
syntax : < Ip Address> Ip Address of the sensor
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ccApSensorMac		1.3.6.1.4.1.388.6.20.6.1.8
Mac of the Sensor .
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ccV2dot0Groups		1.3.6.1.4.1.388.6.1000
OBJECT IDENTIFIER

v2dot0Group		1.3.6.1.4.1.388.6.1000.1
Description.
Status: current	Access: read-only
OBJECT-GROUP

v2dot0NotificationGroup		1.3.6.1.4.1.388.6.1000.2
Description.
Status: current	Access: read-only
NOTIFICATION-GROUP

v2dot0GroupOfDepricated		1.3.6.1.4.1.388.6.1000.3
Description.
Status: deprecated	Access: read-only
OBJECT-GROUP

v2dot1Group		1.3.6.1.4.1.388.6.1000.4
Description.
Status: current	Access: read-only
OBJECT-GROUP

v2dot1NotificationGroup		1.3.6.1.4.1.388.6.1000.5
Description.
Status: current	Access: read-only
NOTIFICATION-GROUP

v2dot1StatsGroup		1.3.6.1.4.1.388.6.1000.6
Description.
Status: current	Access: read-only
OBJECT-GROUP

v2dot0GroupOfDeprecated		1.3.6.1.4.1.388.6.1000.7
Description.
Status: deprecated	Access: read-only
OBJECT-GROUP