SYMBIOSDMI20MIFDEFINITIONID22-MIB

File: SYMBIOSDMI20MIFDEFINITIONID22-MIB.mib (107247 bytes)

Imported modules

RFC-1212 RFC1155-SMI RFC1213-MIB
RFC-1215

Imported symbols

OBJECT-TYPE Counter enterprises
DisplayString TRAP-TYPE

Defined Types

DmiCounter  
Counter    

DmiInteger  
INTEGER    

DmiInteger64X  
INTEGER -18446744073709551615..18446744073709551615    

DmiDisplaystring  
DisplayString    

DmiDateX  
OCTET STRING Size(28)    

DmiComponentIndex  
INTEGER    

SComponentid  
SEQUENCE    
  a1Manufacturer DmiDisplaystring
  a1Product DmiDisplaystring
  a1Version DmiDisplaystring
  a1SerialNumber DmiDisplaystring
  a1Installation DmiDateX
  a1Verify DmiInteger

SSubcomponentSoftware  
SEQUENCE    
  a2SoftwareIndex DmiInteger
  a2Type DmiDisplaystring
  a2Vendor DmiDisplaystring
  a2Version DmiDisplaystring
  a2Description DmiDisplaystring
  a2IdentificationCode DmiDisplaystring
  a2LanguageEdition DmiDisplaystring
  a2InterfaceDescription DmiDisplaystring
  a2InterfaceVersion DmiDisplaystring

SWorldwideIdentifer  
SEQUENCE    
  a3WorldwideIdentifierIndex DmiInteger
  a3WorldwideIdentifierType DmiInteger
  a3WorldwideIdentifier DmiDisplaystring

SFieldReplaceableUnit  
SEQUENCE    
  a4FruIndex DmiInteger
  a4DeviceGroupIndex DmiInteger
  a4Description DmiDisplaystring
  a4Manufacturer DmiDisplaystring
  a4Model DmiDisplaystring
  a4PartNumber DmiDisplaystring
  a4FruSerialNumber DmiDisplaystring
  a4RevisionLevel DmiDisplaystring
  a4WarrantyStartDate DmiDateX
  a4WarrantyDuration DmiInteger
  a4SupportPhoneNumber DmiDisplaystring
  a4FruInternetUniformResourceLocator DmiDisplaystring

SStorageDevices  
SEQUENCE    
  a5StorageDeviceIndex DmiInteger
  a5Type DmiInteger
  a5TypeDescription DmiDisplaystring
  a5Sub-identifier DmiDisplaystring
  a5MediaDataBlockSize DmiInteger
  a5FormattedMediaCapacity DmiInteger64X
  a5RemovableDevice DmiInteger
  a5DeviceLoaded DmiInteger
  a5RemovableMedia DmiInteger
  a5MediaLoaded DmiInteger
  a5Compression DmiInteger
  a5Encryption DmiInteger

SStorageDevicesEvents  
SEQUENCE    
  a6StorageDevicesEventType DmiInteger
  a6EventSeverity DmiInteger
  a6EventIsStateBased DmiInteger
  a6EventStateKey DmiInteger
  a6AssociatedGroup DmiDisplaystring
  a6EventSystem DmiInteger
  a6EventSubsystem DmiInteger
  a6EventSolution DmiInteger
  a6InstanceDataPresent DmiInteger
  a6EventMessage DmiDisplaystring

SStorageController  
SEQUENCE    
  a7ControllerIndex DmiInteger
  a7Identification DmiDisplaystring
  a7ProtectionManagement DmiInteger
  a7BusMaster DmiInteger
  a7SecondsSinceLastPower-up DmiInteger

SStorageControllerEvents  
SEQUENCE    
  a8StorageControllerEventType DmiInteger
  a8EventSeverity DmiInteger
  a8EventIsStateBased DmiInteger
  a8EventStateKey DmiInteger
  a8AssociatedGroup DmiDisplaystring
  a8EventSystem DmiInteger
  a8EventSubsystem DmiInteger
  a8EventSolution DmiInteger
  a8InstanceDataPresent DmiInteger
  a8EventMessage DmiDisplaystring

SBusPort  
SEQUENCE    
  a9BusPortIndex DmiInteger
  a9Protocol DmiInteger
  a9ProtocolDescription DmiDisplaystring
  a9SignalCharacteristics DmiInteger
  a9AddressDescriptor DmiDisplaystring
  a9Isochronous DmiInteger
  a9MaximumWidth DmiInteger
  a9MaximumTransferRate DmiInteger
  a9MaximumNumberOfAttachments DmiInteger
  a9ConnectorType DmiInteger
  a9ConnectorTypeDescription DmiDisplaystring
  a9ConnectorGender DmiInteger

SFibreChannelBusPortExtensions  
SEQUENCE    
  a10BusPortIndex DmiInteger
  a10EndToEndCredit DmiInteger
  a10BufferToBufferCredit DmiInteger
  a10LinkType DmiInteger
  a10FlowControlClassType DmiInteger
  a10FlowControlAcknowledgmentType DmiInteger
  a10FabricTopology DmiInteger

SMassStorageAssociation  
SEQUENCE    
  a11AssociationIndex DmiInteger
  a11Type DmiDisplaystring
  a11Reference1 DmiDisplaystring
  a11Reference2 DmiDisplaystring

SMassStorageAssociationEvents  
SEQUENCE    
  a12MassStorageAssociationEventType DmiInteger
  a12EventSeverity DmiInteger
  a12EventIsStateBased DmiInteger
  a12EventStateKey DmiInteger
  a12AssociatedGroup DmiDisplaystring
  a12EventSystem DmiInteger
  a12EventSubsystem DmiInteger
  a12EventSolution DmiInteger
  a12InstanceDataPresent DmiInteger
  a12EventMessage DmiDisplaystring

SBusPortAssociation  
SEQUENCE    
  a13BusPortAssociationIndex DmiInteger
  a13NegotiatedSpeed DmiInteger
  a13NegotiatedWidth DmiInteger

SOperationalState  
SEQUENCE    
  a14OperationalStateInstanceIndex DmiInteger
  a14DeviceGroupIndex DmiInteger
  a14OperationalStatus DmiInteger
  a14UsageState DmiInteger
  a14AvailabilityStatus DmiInteger
  a14AdministrativeState DmiInteger
  a14FatalErrorCount DmiCounter
  a14MajorErrorCount DmiCounter
  a14WarningErrorCount DmiCounter
  a14CurrentErrorStatus DmiInteger
  a14DevicePredictedFailureStatus DmiInteger

SSymbiosEventPolling  
SEQUENCE    
  a15SymbiosFlag DmiInteger
  a15SmartEventPolling DmiInteger
  a15ScanEventPolling DmiInteger
  a15Saf-teEventPolling DmiInteger
  a15EventPollingPeriod DmiInteger
  a15ControlLevelForDomainValidationErrorR DmiInteger
  a15ControlLevelForDomainValidationSchedu DmiInteger

SSymbiosDevice  
SEQUENCE    
  a16SymbiosDeviceIndex DmiInteger
  a16SmartReportingCapability DmiInteger
  a16ControlLevelForDomainValidationMargin DmiInteger
  a16ControlLevelForDomainValidationSkewin DmiInteger
  a16MaximumAllowedNegotiatedSpeed DmiInteger
  a16MaximumAllowedNegotiatedWidth DmiInteger
  a16DomainValidationNegotiatedSpeed DmiInteger
  a16DomainValidationNegotiatedWidth DmiInteger

SSaf-teProcessor  
SEQUENCE    
  a17Saf-teProcessorIndex DmiInteger
  a17StorageControllerIndex DmiInteger
  a17ScsiId DmiInteger64X
  a17ScsiLun DmiInteger64X
  a17VendorId DmiDisplaystring
  a17ProductId DmiDisplaystring
  a17FirmwareRevisionLevel DmiDisplaystring
  a17EnclosureUniqueIdentifier DmiDisplaystring
  a17Saf-teSpecificationRevisionLevel DmiDisplaystring
  a17HasLocks DmiInteger
  a17HasSpeakers DmiInteger
  a17DoorLocked DmiInteger
  a17SpeakerStatus DmiInteger
  a17PowerOnMinutes DmiInteger
  a17PowerOnCycles DmiInteger
  a17TemperatureOutOfRange DmiInteger

SSaf-teControlledFan  
SEQUENCE    
  a18Saf-teControlledFanIndex DmiInteger
  a18Saf-teProcessorIndex DmiInteger
  a18Status DmiInteger

SSaf-teControlledPowerSupply  
SEQUENCE    
  a19Saf-teControlledPowerSupplyIndex DmiInteger
  a19Saf-teProcessorIndex DmiInteger
  a19Status DmiInteger

SSaf-teControlledSlot  
SEQUENCE    
  a20Saf-teControlledSlotIndex DmiInteger
  a20Saf-teProcessorIndex DmiInteger
  a20ScsiId DmiInteger64X
  a20NumberOfInsertions DmiInteger
  a20State DmiInteger
  a20Rebuild DmiInteger
  a20DeviceFault DmiInteger
  a20InFailedArray DmiInteger
  a20InCriticalArray DmiInteger
  a20ParityCheck DmiInteger
  a20PredictedFault DmiInteger

SSaf-teControlledTemperatureSensor  
SEQUENCE    
  a21Saf-teControlledTemperatureSensorInde DmiInteger
  a21Saf-teProcessorIndex DmiInteger
  a21Temperature DmiInteger

SNetworkAdapter802PortGroup  
SEQUENCE    
  a22PortIndex DmiInteger
  a22PermanentNetworkAddress DmiDisplaystring
  a22CurrentNetworkAddress DmiDisplaystring
  a22ConnectorType DmiInteger
  a22DataRate DmiInteger

SNetworkAdapterHardwareGroup  
SEQUENCE    
  a23NetworkTopology DmiInteger
  a23TransmissionCapability DmiInteger
  a23NetworkAdapterRamSize DmiInteger
  a23BusType DmiInteger
  a23BusWidth DmiInteger
  a23AdapterHardwareIndex DmiInteger

SEventGenerationForPowerSupply  
SEQUENCE    
  a24EventType DmiInteger
  a24EventSeverity DmiInteger
  a24IsEventState-based DmiInteger
  a24EventStateKey DmiInteger
  a24AssociatedGroup DmiDisplaystring
  a24EventSystem DmiInteger
  a24EventSubsystem1 DmiInteger
  a24IsInstanceDataPresent DmiInteger
  a24EventMessage DmiDisplaystring

SEventGenerationForTemperatureProbe  
SEQUENCE    
  a25EventType DmiInteger
  a25EventSeverity DmiInteger
  a25IsEventState-based DmiInteger
  a25EventStateKey DmiInteger
  a25AssociatedGroup DmiDisplaystring
  a25EventSystem DmiInteger
  a25EventSubsystem DmiInteger
  a25IsInstanceDataPresent DmiInteger
  a25EventMessage DmiDisplaystring

SEventGenerationForFans  
SEQUENCE    
  a26EventType DmiInteger
  a26EventSeverity DmiInteger
  a26IsEventState-based DmiInteger
  a26EventStateKey DmiInteger
  a26AssociatedGroup DmiDisplaystring
  a26EventSystem DmiInteger
  a26EventSubsystem DmiInteger
  a26IsInstanceDataPresent DmiInteger
  a26EventMessage DmiDisplaystring

SSymbiosHealth  
SEQUENCE    
  a27OverallHealthStatus DmiInteger
  a27OverallControllerHealthStatus DmiInteger
  a27Non-recoverableControllers DmiInteger
  a27DegradedControllers DmiInteger
  a27OverallDeviceHealthStatus DmiInteger
  a27Non-recoverableDevices DmiInteger
  a27DegradedDevices DmiInteger
  a27DataValuesTimeStamp DmiDateX
  a27HardwareTimeStamp DmiDateX

SSymbiosController  
SEQUENCE    
  a28SymbiosControllerIndex DmiInteger
  a28LastRunDateForDv DmiDateX
  a28IoFactorForDvErrorRate DmiInteger
  a28TimeFactorForDvErrorRate DmiInteger
  a28ErrorCountFactorForDvErrorRate DmiInteger
  a28DvStatus DmiInteger

SMiftomib  
SEQUENCE    
  a99MibName DmiDisplaystring
  a99MibOid DmiDisplaystring
  a99DisableTrap DmiInteger

Defined Values

symbios 1.3.6.1.4.1.1123
OBJECT IDENTIFIER    

cosprings 1.3.6.1.4.1.1123.3
OBJECT IDENTIFIER    

scsi 1.3.6.1.4.1.1123.3.1
OBJECT IDENTIFIER    

fam8xx 1.3.6.1.4.1.1123.3.1.2
OBJECT IDENTIFIER    

id22 1.3.6.1.4.1.1123.3.1.2.22
OBJECT IDENTIFIER    

dmtfGroups 1.3.6.1.4.1.1123.3.1.2.22.1
OBJECT IDENTIFIER    

tComponentid 1.3.6.1.4.1.1123.3.1.2.22.1.1
This group defines the attributes common to all components. This group is required.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SComponentid

eComponentid 1.3.6.1.4.1.1123.3.1.2.22.1.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SComponentid  

a1Manufacturer 1.3.6.1.4.1.1123.3.1.2.22.1.1.1.1
Manufacturer of this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a1Product 1.3.6.1.4.1.1123.3.1.2.22.1.1.1.2
Product name for this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a1Version 1.3.6.1.4.1.1123.3.1.2.22.1.1.1.3
Version number of this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a1SerialNumber 1.3.6.1.4.1.1123.3.1.2.22.1.1.1.4
Serial number for this component
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a1Installation 1.3.6.1.4.1.1123.3.1.2.22.1.1.1.5
The installation date and time of this component. The Service Layer assigns this value, the manufacturer should leave it blank.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDateX  

a1Verify 1.3.6.1.4.1.1123.3.1.2.22.1.1.1.6
A code that provides a level of verification that the component is still installed and working.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vAnErrorOccurredCheckStatusCode(0), vThisComponentDoesNotExist(1), vTheVerifyIsNotSupported(2), vReserved(3), vThisComponentExistsButTheFunctionalityI(4), vThisComponentExistsButTheFunctionality1(5), vThisComponentExistsAndIsNotFunctioningC(6), vThisComponentExistsAndIsFunctioningCorr(7)  

tSubcomponentSoftware 1.3.6.1.4.1.1123.3.1.2.22.1.2
This group describes the software resources that are used by a component or subcomponent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSubcomponentSoftware

eSubcomponentSoftware 1.3.6.1.4.1.1123.3.1.2.22.1.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSubcomponentSoftware  

a2SoftwareIndex 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.1
An index into the SubComponent Software table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a2Type 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.2
The type of software resource described by this row. For example this value would be 'Device Driver', 'INF File', 'Boot ROM', and etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2Vendor 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.3
The name of the vendor who supplied this piece of software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2Version 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.4
The revision level of this piece of software. For example the Version Major, Version Minor, Revision, and Build numbers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2Description 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.5
An additional description of this piece of software
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2IdentificationCode 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.6
The Stock Keeping Unit (SKU) or Part Number for this piece of software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2LanguageEdition 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.7
Identifies the language edition of this piece of software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2InterfaceDescription 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.8
This is the specification or operating system to which this piece of software conforms. (e.g. 'Microsoft NT', 'NetWare', etc.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a2InterfaceVersion 1.3.6.1.4.1.1123.3.1.2.22.1.2.1.9
The specification or operating system version to which this piece of software conforms. (e.g. '4.0 or higher', '3.xx', etc.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tWorldwideIdentifer 1.3.6.1.4.1.1123.3.1.2.22.1.3
The Worldwide Identifer
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SWorldwideIdentifer

eWorldwideIdentifer 1.3.6.1.4.1.1123.3.1.2.22.1.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SWorldwideIdentifer  

a3WorldwideIdentifierIndex 1.3.6.1.4.1.1123.3.1.2.22.1.3.1.1
An index into the Worldwide Identifier table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a3WorldwideIdentifierType 1.3.6.1.4.1.1123.3.1.2.22.1.3.1.2
The type of identifier displayed by the Worldwide Identifier attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vNone(3), vVendorIdProductIdSerialNumber(4), vIeeeExtendedUniqueIdentifier64-bit(5), vFc-ph64-bitName-identifier(6), vBinary(7), vUnicode(8), vLanMacAddress(9), vWanAccessAddress(10)  

a3WorldwideIdentifier 1.3.6.1.4.1.1123.3.1.2.22.1.3.1.3
The Worldwide identifier for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tFieldReplaceableUnit 1.3.6.1.4.1.1123.3.1.2.22.1.4
A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SFieldReplaceableUnit

eFieldReplaceableUnit 1.3.6.1.4.1.1123.3.1.2.22.1.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SFieldReplaceableUnit  

a4FruIndex 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.1
The index into the Field Replaceable Unit table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a4DeviceGroupIndex 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.2
The group ID of the group referencing this Field Replaceable Unit instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a4Description 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.3
A clear description of this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4Manufacturer 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.4
The name of the company manufacturing or providing this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4Model 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.5
The manufacturer's model number for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4PartNumber 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.6
A part number by which a replacement part can be ordered for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4FruSerialNumber 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.7
The manufacturer's serial number for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4RevisionLevel 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.8
The revision level of this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4WarrantyStartDate 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.9
The start date of the service warranty for this Field Replaceabl Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDateX  

a4WarrantyDuration 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.10
The total duration of this Field Replaceable Unit warranty in months.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a4SupportPhoneNumber 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.11
The phone number(s) for support for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a4FruInternetUniformResourceLocator 1.3.6.1.4.1.1123.3.1.2.22.1.4.1.12
The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tStorageDevices 1.3.6.1.4.1.1123.3.1.2.22.1.5
This group defines the mass storage devices in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SStorageDevices

eStorageDevices 1.3.6.1.4.1.1123.3.1.2.22.1.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SStorageDevices  

a5StorageDeviceIndex 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.1
An index into the storage device table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a5Type 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.2
The type of this mass storage device. If 'Other' is used, then the Type Description attribute shall be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vRigidDiskDrive(3), vFlexibleDisketteDrive(4), vOpticalWrite-onceread-manyWormDrive(6), vMagneto-opticalDrive(7), vCompactDiskDrive(8), vFlashDisk(9), vCartridgeRigidDiskDrive(10), vOpticalFloppyDiskDrive(11), vTapeDrive(12), vMediaChanger(13), vSolidState(14), vDigitalVersatileDiskDvdDrive(15), vDigitalVersatileDiskDvdramRamDrive(16)  

a5TypeDescription 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.3
A longer description of the storage device. For example: 3.5 inch flexible diskette drive using diskettes with a maximum capacity of 1.44MB. If 'Other' was specified above, then this field shall be used. Otherwise, the contents of this optional field shall not contradict the Storage Device Type specified above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a5Sub-identifier 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.4
The sub-identifier for this storage device (e.g., the device's SCSI logical unit number).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a5MediaDataBlockSize 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.5
The size in bytes of the data blocks used on the storage media. If the media block size is unknown or not consistent across the media, then this value shall be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a5FormattedMediaCapacity 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.6
The total size in bytes of this storage media after it has been formatted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger64X  

a5RemovableDevice 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.7
If true, then this storage device is removable (e.g.: PCMCIA device).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a5DeviceLoaded 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.8
If true, then the storage device is loaded. If the device is not removable, then this value shall be 'TRUE'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a5RemovableMedia 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.9
If true, then the media in this storage device is removable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a5MediaLoaded 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.10
If true, the media in this storage device is loaded. If the media is not removable, then this value shall be 'TRUE'
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a5Compression 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.11
If true, the storage device supports compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a5Encryption 1.3.6.1.4.1.1123.3.1.2.22.1.5.1.12
If true, the storage device supports encryption.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

tStorageDevicesEvents 1.3.6.1.4.1.1123.3.1.2.22.1.6
Storage Devices events.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SStorageDevicesEvents

eStorageDevicesEvents 1.3.6.1.4.1.1123.3.1.2.22.1.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SStorageDevicesEvents  

a6StorageDevicesEventType 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.1
The type of Storage Devices event that has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vRebuildInProgress(1), vStorageDeviceReadying(2), vStorageDeviceError(3), vSelf-monitoringWarning(4)  

a6EventSeverity 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.2
The severity of this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(16), vNon-recoverable(32)  

a6EventIsStateBased 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.3
The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a6EventStateKey 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.4
This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a6AssociatedGroup 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.5
The
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a6EventSystem 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vDomainValidation(3), vDeviceScan(4), vSmart(5)  

a6EventSubsystem 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a6EventSolution 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.8
A solution to the problem that caused the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), v1stCheckCabling2ndPowerCycleDeviceLas(3), vBackupDataFromFailingDeviceAndReplaceTh(4), vRunDiskAdministrator(5), vNoActionRequired(6)  

a6InstanceDataPresent 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.9
Indicates whether the second event block contains instance-speci ic data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a6EventMessage 1.3.6.1.4.1.1123.3.1.2.22.1.6.1.10
Auxiliary information related to the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tStorageController 1.3.6.1.4.1.1123.3.1.2.22.1.7
This group defines the storage controller in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SStorageController

eStorageController 1.3.6.1.4.1.1123.3.1.2.22.1.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SStorageController  

a7ControllerIndex 1.3.6.1.4.1.1123.3.1.2.22.1.7.1.1
An index into the Storage Controller table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a7Identification 1.3.6.1.4.1.1123.3.1.2.22.1.7.1.2
e.g. Name, brand and hardware revision level of the storage controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a7ProtectionManagement 1.3.6.1.4.1.1123.3.1.2.22.1.7.1.3
Indicates whether or not the controller provides redundancy or protection against device failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vUnprotected(3), vProtected(4), vProtectedThroughScsi-3ControllerCommand(5), vProtectedThroughScsi-3ControllerComman1(6)  

a7BusMaster 1.3.6.1.4.1.1123.3.1.2.22.1.7.1.4
If true, then this storage controller is the bus master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a7SecondsSinceLastPower-up 1.3.6.1.4.1.1123.3.1.2.22.1.7.1.5
The number of seconds that have passed since this controller was last powered on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tStorageControllerEvents 1.3.6.1.4.1.1123.3.1.2.22.1.8
Storage Controller events.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SStorageControllerEvents

eStorageControllerEvents 1.3.6.1.4.1.1123.3.1.2.22.1.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SStorageControllerEvents  

a8StorageControllerEventType 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.1
The type of Storage Controller event that has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vStorageControllerError(1), vSelf-monitoringWarning1(2)  

a8EventSeverity 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.2
The severity of this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(16), vNon-recoverable(32)  

a8EventIsStateBased 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.3
The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a8EventStateKey 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.4
This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a8AssociatedGroup 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.5
The
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a8EventSystem 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vDomainValidation(3), vControllerScan(4)  

a8EventSubsystem 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a8EventSolution 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.8
A solution to the problem that caused the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), v1stCheckCabling2ndPowerCycleSystemLas(3), vRunDomainValidationOnThisController(4)  

a8InstanceDataPresent 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.9
Indicates whether the second event block contains instance-speci ic data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a8EventMessage 1.3.6.1.4.1.1123.3.1.2.22.1.8.1.10
Auxiliary information related to the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tBusPort 1.3.6.1.4.1.1123.3.1.2.22.1.9
This global table has one entry for each of the Bus Ports in this Component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SBusPort

eBusPort 1.3.6.1.4.1.1123.3.1.2.22.1.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SBusPort  

a9BusPortIndex 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.1
An index into the Bus Port table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a9Protocol 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.2
The protocol describing the electrical characteristic of the Bus Port. If 'Other' is used, then the Protocol Description attribute shall be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vEisa(3), vIsa(4), vPci(5), vAtaatapi(6), vFlexibleDiskette(7), v1496(8), vScsiParallelInterface(9), vScsiFibreChannelProtocol(10), vScsiSerialBusProtocol(11), vScsiSerialBusProtocol-21394(12), vScsiSerialStorageArchitecture(13), vVesa(14), vPcmcia(15), vUniversalSerialBus(16), vParallelPort(17), vEscon(18), vDiagnostic(19), vI2c(20), vPower(21), vHippi(22), vMultibus(23), vVme(24), vIpi(25), vIeee-488(26), vRs232(27), vIeee802310base5(28), vIeee802310base2(29), vIeee80231base5(30), vIeee802310broad36(31), vIeee8023100basevg(32), vIeee8025Token-ring(33), vAnsiX3t95Fddi(34), vMca(35)  

a9ProtocolDescription 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.3
Additional description of the protocol described above. If 'Other' was specified above, then this field shall be used. Otherwise, the contents of this optional field shall not contradict the Protocol specified above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a9SignalCharacteristics 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.4
The signal characteristics of the Bus Port being described.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vSingleEnded(3), vDifferential(4), vLowVoltageDifferential(5), vOptical(6)  

a9AddressDescriptor 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.5
The address descriptor of this bus port. For example, the SCSI address of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a9Isochronous 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.6
Indicates whether or not this bus port supports isochronous transfers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a9MaximumWidth 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.7
The maximum width, in bits, of this Bus Port's data path. A value of 1 should be used for serial.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a9MaximumTransferRate 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.8
The theoretical maximum transfer rate, in millions of bytes per second, that this Bus Port is capable of achieving under ideal conditions. A value of zero should be used if the transfer rate is less than 1 million bytes per second. A value of 0x80000000 should be used if the transfer rate is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a9MaximumNumberOfAttachments 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.9
The maximum number of directly addressable entities supported by this bus port's protocol. A value of zero should be used if the number of attachments is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a9ConnectorType 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.10
Describes how options (cards, devices, etc.) physically connect to this bus port. If 'Other' is used, then the Connector Type Description attribute shall be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vNone(3), vScsiAHigh-densityShielded50Pins(4), vScsiAHigh-densityUnshielded50Pins(5), vScsiALow-densityShielded50Pins(6), vScsiALow-densityUnshielded50Pins(7), vScsiPHigh-densityShielded68Pins(8), vScsiPHigh-densityUnshielded68Pins(9), vScsiSca-i80Pins(10), vScsiSca-ii80Pins(11), vScsiFibreChannelDb9Copper(12), vScsiFibreChannelFibre(13), vScsiFibreChannelSca-ii40Pins(14), vScsiFibreChannelSca-ii20Pins(15), vScsiFibreChannelBnc(16), vAta3-12Inch40Pins(17), vAta2-12Inch44Pins(18), vSerial9Pin(19), vSerial25Pin(20), vRs23225Pin(21), vRs422(22), vIeee-488(23), vAui(24), vUptCategory3(25), vUptCategory4(26), vUptCategory5(27), vBnc(28), vStpRj11(29), vStpRj45(30), vStpDb9(31), vFiberMic(32), vAppleAui(33), vPciSlot(34), vIsaSlot(35), vEisaSlot(36), vVesaSlot(37), vPcmciaSlot(38), vPcCardSlot(39), vFloppyDiskette5-14Inch(40), vFloppyDiskette3-12Inch(41), vHssdc6Pins(42), vGbicSocket(43), v13946Pins(44), vScsiVhdciShielded68Pins(45)  

a9ConnectorTypeDescription 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.11
An additional text description of the type of connector describe above. If 'Other' was specified above, then this field shall be used. Otherwis , the contents of this optional field shall not contradict the connector specified above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a9ConnectorGender 1.3.6.1.4.1.1123.3.1.2.22.1.9.1.12
Indicates the gender of the connector described above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vFemale(3), vMale(4)  

tFibreChannelBusPortExtensions 1.3.6.1.4.1.1123.3.1.2.22.1.10
This group extents the Bus Port group with Fibre Channel specific attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SFibreChannelBusPortExtensions

eFibreChannelBusPortExtensions 1.3.6.1.4.1.1123.3.1.2.22.1.10.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SFibreChannelBusPortExtensions  

a10BusPortIndex 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.1
The index into the Bus Port Table that this Fibre Channel group is extending.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a10EndToEndCredit 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.2
The number of allowable outstanding acknowledgments for a sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a10BufferToBufferCredit 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.3
The number of frames which can be handled by the node before a wait for the buffer ready is required, and prior to subsequent frame transmiss ons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a10LinkType 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.4
Reports whether copper or fibre media is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vCopper(3), vFibre-SingleMode1300Nanometers(4), vFibre-SingleMode1500Nanometers(5), vFibre-Multimode50-Laser(6), vFibre-Multimode50-Led(7), vFibre-Multimode625-Laser(8), vFibre-Multimode625-Led(9), vFibreLongWave(10), vFibreShortWave(11)  

a10FlowControlClassType 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.5
Identifies the Flow Control Class Type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vClass-1(3), vClass-2(4), vClass-3(5), vClass-1class-2(6)  

a10FlowControlAcknowledgmentType 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.6
Identifies the Flow Control Acknowledgment Type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vAck-0(3), vAck-1(4), vAck-n(5)  

a10FabricTopology 1.3.6.1.4.1.1123.3.1.2.22.1.10.1.7
If true, a fabric topology exists within the fibre channel bus port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

tMassStorageAssociation 1.3.6.1.4.1.1123.3.1.2.22.1.11
Mass storage associations define the relationships between the various components of the Storage Subsystem.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SMassStorageAssociation

eMassStorageAssociation 1.3.6.1.4.1.1123.3.1.2.22.1.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SMassStorageAssociation  

a11AssociationIndex 1.3.6.1.4.1.1123.3.1.2.22.1.11.1.1
An index into the Association table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a11Type 1.3.6.1.4.1.1123.3.1.2.22.1.11.1.2
This field specifies the type of the association.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a11Reference1 1.3.6.1.4.1.1123.3.1.2.22.1.11.1.3
A reference to an object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a11Reference2 1.3.6.1.4.1.1123.3.1.2.22.1.11.1.4
A reference to an object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tMassStorageAssociationEvents 1.3.6.1.4.1.1123.3.1.2.22.1.12
Mass Storage Association events.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SMassStorageAssociationEvents

eMassStorageAssociationEvents 1.3.6.1.4.1.1123.3.1.2.22.1.12.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SMassStorageAssociationEvents  

a12MassStorageAssociationEventType 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.1
The type of Mass storage association where a change has occurred
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vNewObjectDetected(1), vExistingObjectReplaced(2), vExistingObjectGone(3)  

a12EventSeverity 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.2
The severity of this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(16), vNon-recoverable(32)  

a12EventIsStateBased 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.3
The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a12EventStateKey 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.4
This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a12AssociatedGroup 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.5
The class name of the group that is associated with the events defined in this EventGeneration group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a12EventSystem 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.6
The mass storage association object type which is causing a change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(0), vUnknown(1), vStorageController(2), vStorageDevice(3), vBusPort(4), vVolumeSet(5), vProtectedSpaceExtent(6), vAggregateProtectedSpaceExtent(7), vPhysicalExtent(8), vAggregatePhysicalExtent(9), vRedundancyGroup(10), vCache(11), vSoftwareSubcomponent(12)  

a12EventSubsystem 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a12EventSolution 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.8
A solution to the problem that caused the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vNoActionIsRequired(3)  

a12InstanceDataPresent 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.9
Indicates whether the second event block contains instance-speci ic data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a12EventMessage 1.3.6.1.4.1.1123.3.1.2.22.1.12.1.10
Auxiliary information related to the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tBusPortAssociation 1.3.6.1.4.1.1123.3.1.2.22.1.13
Bus Port Association
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SBusPortAssociation

eBusPortAssociation 1.3.6.1.4.1.1123.3.1.2.22.1.13.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SBusPortAssociation  

a13BusPortAssociationIndex 1.3.6.1.4.1.1123.3.1.2.22.1.13.1.1
An index into the Bus Port Association table. This index is the same as the index in the Association group that defines the bus port association.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a13NegotiatedSpeed 1.3.6.1.4.1.1123.3.1.2.22.1.13.1.2
The maximum burst transfer rate, in millions of bytes, which was negotiated between the two associated bus ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a13NegotiatedWidth 1.3.6.1.4.1.1123.3.1.2.22.1.13.1.3
The width, in bits, of the bus ports data path which was negotiated between the two associated bus ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tOperationalState 1.3.6.1.4.1.1123.3.1.2.22.1.14
This group provides the operational state, usage, and availabili y status, and administrative state indicators for specific Device Group instance .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SOperationalState

eOperationalState 1.3.6.1.4.1.1123.3.1.2.22.1.14.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SOperationalState  

a14OperationalStateInstanceIndex 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.1
The Index into the Operational State table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a14DeviceGroupIndex 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.2
The group ID of the group referencing this instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a14OperationalStatus 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.3
The operational status of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vEnabled(3), vDisabled(4), vNotApplicable(5)  

a14UsageState 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.4
The usage state of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vIdle(3), vActive(4), vBusy(5), vNotApplicable(6)  

a14AvailabilityStatus 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.5
The availability status of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vRunning(3), vWarning(4), vInTest(5), vNotApplicable(6), vPowerOff(7), vOffLine(8), vOffDuty(9), vDegraded(10), vNotInstalled(11), vInstallError(12), vPowerSave(13)  

a14AdministrativeState 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.6
The administrative state of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vLocked(3), vUnlocked(4), vNotApplicable(5), vShuttingDown(6)  

a14FatalErrorCount 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.7
The accumulated Fatal or Non-recoverable error count for this Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiCounter  

a14MajorErrorCount 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.8
The accumulated Major or Critical error count for this Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiCounter  

a14WarningErrorCount 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.9
The accumulated Warning or Non-Critical error count for this Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiCounter  

a14CurrentErrorStatus 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.10
This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status 'Critical' should be reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vOk(3), vNon-critical1(4), vCritical(5), vNon-recoverable1(6)  

a14DevicePredictedFailureStatus 1.3.6.1.4.1.1123.3.1.2.22.1.14.1.11
Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vNotSupportedByThisDevice(3), vNoFailurePredictedByTheDevice(4), vDeviceFailurePredictedByTheDevice(5), vMediaFailurePredictedByTheDevice(6)  

tSymbiosEventPolling 1.3.6.1.4.1.1123.3.1.2.22.1.15
This group is the Symbios Vendor unique group for dealing with Event Polling.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSymbiosEventPolling

eSymbiosEventPolling 1.3.6.1.4.1.1123.3.1.2.22.1.15.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSymbiosEventPolling  

a15SymbiosFlag 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.1
A Symbios Vendor Unique Flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

a15SmartEventPolling 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.2
A flag indicating whether or not the CI will poll for SMART events.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vDisabled(0), vEnabled(1), vUnknown(2), vNotApplicable(3)  

a15ScanEventPolling 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.3
A flag indicating whether or not the CI will scan for a change in Devices and Controllers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vDisabled(0), vEnabled(1), vUnknown(2), vNotApplicable(3)  

a15Saf-teEventPolling 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.4
A flag indicating whether or not the CI will poll for SAF-TE events.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vDisabled(0), vEnabled(1), vUnknown(2), vNotApplicable(3)  

a15EventPollingPeriod 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.5
The event poll period in number of minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

a15ControlLevelForDomainValidationErrorR 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.6
This indicates the control level for performing domain validatio based on Error Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vNotSupported(0), vDisabled(1), vReportIfDomainValidationRequired(2), vWhenDomainValidationRequiredAutoRun(3)  

a15ControlLevelForDomainValidationSchedu 1.3.6.1.4.1.1123.3.1.2.22.1.15.1.7
This indicates the number of hours between scheduled runs of domain validation. Zero indicates that no scheduled run should be performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

tSymbiosDevice 1.3.6.1.4.1.1123.3.1.2.22.1.16
This group is a Symbios Vendor unique group for dealing with Devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSymbiosDevice

eSymbiosDevice 1.3.6.1.4.1.1123.3.1.2.22.1.16.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSymbiosDevice  

a16SymbiosDeviceIndex 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.1
An index into the Symbios Vendor Unique Device info table. This index corresponds to the Storage Device index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a16SmartReportingCapability 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.2
A flag indicating the state of a Devices's SMART reporting capability.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vDisabled(0), vEnabled(1), vUnknown(2), vNotSupported(3)  

a16ControlLevelForDomainValidationMargin 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.3
This indicates the control level for margining while performing domain validation for this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vNotSupported(0), vAll(1), vNominal(2)  

a16ControlLevelForDomainValidationSkewin 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.4
This indicates the control level for skewing while performing domain validation for this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vNotSupported(0), vAll(1), vNominal(2)  

a16MaximumAllowedNegotiatedSpeed 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.5
This indicates the maximum allowed negotiated speed while performing domain validation for this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vNotApplicable(0), vMaximumRate(1), v160MillionBytesseconds(2), v80MillionBytesseconds(3), v40MillionBytesseconds(4), v20MillionBytesseconds(5), v10MillionBytesseconds(6), v5MillionBytesseconds(7), vAsynchronous(8)  

a16MaximumAllowedNegotiatedWidth 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.6
This indicates the maximum allowed negotiated width while performing domain validation for this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vNotApplicable(0), vMaximumWidth(1), vWide16Bits(2), vNarrow8Bits(3)  

a16DomainValidationNegotiatedSpeed 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.7
This indicates the maximum negotiated speed that was achieved while performing domain validation for this device. The speed is indicated in millions of bytes per second. Typically, a value of zero would represent asynchronous transfers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a16DomainValidationNegotiatedWidth 1.3.6.1.4.1.1123.3.1.2.22.1.16.1.8
This indicates the maximum negotiated width that was achieved while performing domain validation for this device. The width is indicated in bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tSaf-teProcessor 1.3.6.1.4.1.1123.3.1.2.22.1.17
This group defines a SAF-TE Processor
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSaf-teProcessor

eSaf-teProcessor 1.3.6.1.4.1.1123.3.1.2.22.1.17.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSaf-teProcessor  

a17Saf-teProcessorIndex 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.1
An index into the SAF-TE processor table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a17StorageControllerIndex 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.2
An index into the Storage Controller table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a17ScsiId 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.3
The SCSI target/initiator identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger64X  

a17ScsiLun 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.4
The SCSI logical unit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger64X  

a17VendorId 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.5
The vendor ID that is returned in the Inquiry command
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a17ProductId 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.6
The product ID that is returned in the Inquiry command
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a17FirmwareRevisionLevel 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.7
Identifies the current firmware revision of the SAF-TE processor
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a17EnclosureUniqueIdentifier 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.8
This field specifies the unique unit number for the SAF-TE processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a17Saf-teSpecificationRevisionLevel 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.9
Identifies the revision of the SAF-TE interface specification to which this device claims compliance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a17HasLocks 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.10
If true, then this SAF-TE processor is contained within an enclosure that has locks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a17HasSpeakers 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.11
If true, then this SAF-TE processor is contained within an enclosure that has speakers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a17DoorLocked 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.12
If true, then this SAF-TE processor enclosure is locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a17SpeakerStatus 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.13
If true, then this SAF-TE processor enclsoure speakers are turned on. If false, then the speakers are off or not installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a17PowerOnMinutes 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.14
Total number of power on minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a17PowerOnCycles 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.15
Total number of times the SAF-TE enclosure has been power on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a17TemperatureOutOfRange 1.3.6.1.4.1.1123.3.1.2.22.1.17.1.16
If true, then the temperature is out of range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

tSaf-teControlledFan 1.3.6.1.4.1.1123.3.1.2.22.1.18
This group defines status of a fan controlled by a SAF-TE Processor
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSaf-teControlledFan

eSaf-teControlledFan 1.3.6.1.4.1.1123.3.1.2.22.1.18.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSaf-teControlledFan  

a18Saf-teControlledFanIndex 1.3.6.1.4.1.1123.3.1.2.22.1.18.1.1
An index into the SAF-TE controlled fan table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a18Saf-teProcessorIndex 1.3.6.1.4.1.1123.3.1.2.22.1.18.1.2
The Index to the SAF-TE proccessor that is controlling this fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a18Status 1.3.6.1.4.1.1123.3.1.2.22.1.18.1.3
The fan status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFanIsOperational(0), vFanIsMalfunctioning(1), vFanIsNotInstalled(2), vUnknownStatus(128)  

tSaf-teControlledPowerSupply 1.3.6.1.4.1.1123.3.1.2.22.1.19
This group defines status of a Power Supply controlled by a SAF-TE Processor
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSaf-teControlledPowerSupply

eSaf-teControlledPowerSupply 1.3.6.1.4.1.1123.3.1.2.22.1.19.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSaf-teControlledPowerSupply  

a19Saf-teControlledPowerSupplyIndex 1.3.6.1.4.1.1123.3.1.2.22.1.19.1.1
An index into the SAF-TE controlled Power Supply table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a19Saf-teProcessorIndex 1.3.6.1.4.1.1123.3.1.2.22.1.19.1.2
The Index to the SAF-TE proccessor that is controlling this Power Supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a19Status 1.3.6.1.4.1.1123.3.1.2.22.1.19.1.3
The Power Supply status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vPowerSupplyIsOperationalAndOn(0), vPowerSupplyIsOperationalAndOff(1), vPowerSupplyIsMalfunctioningAndCommanded(16), vPowerSupplyIsMalfunctioningAndCommande1(17), vPowerSupplyIsNotPresent(32), vPowerSupplyIsPresent(33), vUnknownStatus(128)  

tSaf-teControlledSlot 1.3.6.1.4.1.1123.3.1.2.22.1.20
This group defines status of a Slot controlled by a SAF-TE Processor
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSaf-teControlledSlot

eSaf-teControlledSlot 1.3.6.1.4.1.1123.3.1.2.22.1.20.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSaf-teControlledSlot  

a20Saf-teControlledSlotIndex 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.1
An index into the SAF-TE controlled Slot table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a20Saf-teProcessorIndex 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.2
The Index to the SAF-TE proccessor table that is controlling this Slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a20ScsiId 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.3
The SCSI target/initiator identifier for this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger64X  

a20NumberOfInsertions 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.4
The total number of device insertions for this slot while the enclosure is powered on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a20State 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.5
The slot state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vDevicePresent-Ready(1), vDevicePresent-NotReady(2), vDevicePresent-HotSpare(3), vDevicePresent-ReadyForRemoval(4), vDeviceNotPresent(5), vDeviceNotPresent-ReadyForInsertion(6), vUnconfigured(7), vUnknownState(8)  

a20Rebuild 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.6
Rebuild status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vNotRebuilding(0), vRebuildInProcess(1), vRebuildStopped(2), vUnknownStatus(3)  

a20DeviceFault 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.7
If true, the device has exhibited some hardware or data fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a20InFailedArray 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.8
If true, the device is in an array and an error has occurred on any member of the array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a20InCriticalArray 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.9
If true, the device is in an array that is non fault-tolerant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a20ParityCheck 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.10
If true, the device is in an array that is undergoing a parity check operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

a20PredictedFault 1.3.6.1.4.1.1123.3.1.2.22.1.20.1.11
If true, the device has been tagged by a fault prediction algorithm as being likely to fail in the near future.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1), vUnknown(2)  

tSaf-teControlledTemperatureSensor 1.3.6.1.4.1.1123.3.1.2.22.1.21
This group defines status of a Temperature sensor controlled by a SAF-TE Processor
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSaf-teControlledTemperatureSensor

eSaf-teControlledTemperatureSensor 1.3.6.1.4.1.1123.3.1.2.22.1.21.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSaf-teControlledTemperatureSensor  

a21Saf-teControlledTemperatureSensorInde 1.3.6.1.4.1.1123.3.1.2.22.1.21.1.1
An index into the SAF-TE controlled Temperature sensor table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a21Saf-teProcessorIndex 1.3.6.1.4.1.1123.3.1.2.22.1.21.1.2
The Index to the SAF-TE proccessor that is controlling this Temperature sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a21Temperature 1.3.6.1.4.1.1123.3.1.2.22.1.21.1.3
The current temperature in degrees Fahrenheit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tNetworkAdapter802PortGroup 1.3.6.1.4.1.1123.3.1.2.22.1.22
Contains objects related to each of the network ports on the network adapter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SNetworkAdapter802PortGroup

eNetworkAdapter802PortGroup 1.3.6.1.4.1.1123.3.1.2.22.1.22.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SNetworkAdapter802PortGroup  

a22PortIndex 1.3.6.1.4.1.1123.3.1.2.22.1.22.1.1
This attribute is the ordinal of the network port within the network adapter, i.e. the 'port number'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a22PermanentNetworkAddress 1.3.6.1.4.1.1123.3.1.2.22.1.22.1.2
This is the node address stored permanently in the adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a22CurrentNetworkAddress 1.3.6.1.4.1.1123.3.1.2.22.1.22.1.3
This is the node address that can be modified by software, sometimes referred to as the Locally Administered Address (LAA).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a22ConnectorType 1.3.6.1.4.1.1123.3.1.2.22.1.22.1.4
This is the type of connector currently being used to physically attach this port to the LAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vUnknown(1), vAui(2), vUtpCategory3(3), vUtpCategory4(4), vUtpCategory5(5), vBnc(6), vStpRj45(7), vStpDb9(8), vFiberMic(9), vAppleAui(10)  

a22DataRate 1.3.6.1.4.1.1123.3.1.2.22.1.22.1.5
This is the rate at which data is transferred over the LAN in Mbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tNetworkAdapterHardwareGroup 1.3.6.1.4.1.1123.3.1.2.22.1.23
Contains objects related to the network adapter hardware.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SNetworkAdapterHardwareGroup

eNetworkAdapterHardwareGroup 1.3.6.1.4.1.1123.3.1.2.22.1.23.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SNetworkAdapterHardwareGroup  

a23NetworkTopology 1.3.6.1.4.1.1123.3.1.2.22.1.23.1.1
This is the network media access method/topology supported by this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), v10MbpsEthernet(2), v100MbpsEthernet(3), v10010MbpsEthernet(4), v100MbpsVgAnylan(5), v4MbpsToken-ring(6), v16MbpsToken-ring(7), v164MbpsToken-ring(8), v2MbpsArcnet(9), v20MbpsArcnet(10), vFddi(11), vAtm(12), vAppletalk(13), v100mbpsTokenRing(14), v1gbpsEthernet(15)  

a23TransmissionCapability 1.3.6.1.4.1.1123.3.1.2.22.1.23.1.2
The transmission capabilities of the adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vNormal(1), vFullDuplex(2)  

a23NetworkAdapterRamSize 1.3.6.1.4.1.1123.3.1.2.22.1.23.1.3
This is the total size of adapter RAM in Kb.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a23BusType 1.3.6.1.4.1.1123.3.1.2.22.1.23.1.4
This is the type of bus used to interface the adapter to the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vIsa(2), vEisa(3), vMca(4), vPci(5), vVl(6), vPcmcia(7), vParallel(8), vNec98(9), vMotherboard(256)  

a23BusWidth 1.3.6.1.4.1.1123.3.1.2.22.1.23.1.5
This is the width (in bits) of the data path used to interface the adapter with the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), v8BitCard(3), v16BitCard(4), v32BitCard(5), v64BitCard(6), v128BitCard(7)  

a23AdapterHardwareIndex 1.3.6.1.4.1.1123.3.1.2.22.1.23.1.6
An index into the Network Adapter Hardware table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tEventGenerationForPowerSupply 1.3.6.1.4.1.1123.3.1.2.22.1.24
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SEventGenerationForPowerSupply

eEventGenerationForPowerSupply 1.3.6.1.4.1.1123.3.1.2.22.1.24.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEventGenerationForPowerSupply  

a24EventType 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.1
The type of event that has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vPowerSupplyStatusChange(1), vPowerControlRequest(2), vPowerSupplyFailed(256), vPowerSupplyOk(257), vPowerSupplyLikelyToFail(258)  

a24EventSeverity 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.2
The severity of this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(16), vNon-recoverable(32)  

a24IsEventState-based 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.3
The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a24EventStateKey 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.4
A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this this attribute's value is not defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a24AssociatedGroup 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.5
The class name of the group that is associated with the events defined in this EventGeneration group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a24EventSystem 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a24EventSubsystem 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a24IsInstanceDataPresent 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.8
Indicates whether the second event block contains instance-speci ic data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a24EventMessage 1.3.6.1.4.1.1123.3.1.2.22.1.24.1.9
Auxillary information releated to the event This text contains the name of the Probe
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tEventGenerationForTemperatureProbe 1.3.6.1.4.1.1123.3.1.2.22.1.25
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SEventGenerationForTemperatureProbe

eEventGenerationForTemperatureProbe 1.3.6.1.4.1.1123.3.1.2.22.1.25.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEventGenerationForTemperatureProbe  

a25EventType 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.1
The type of event that has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vTemperatureOutOfRange(1)  

a25EventSeverity 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.2
The severity of this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(16), vNon-recoverable(32)  

a25IsEventState-based 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.3
The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a25EventStateKey 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.4
A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this this attribute's value is not defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a25AssociatedGroup 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.5
The class name of the group that is associated with the events defined in this Event Generation group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a25EventSystem 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a25EventSubsystem 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a25IsInstanceDataPresent 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.8
Indicates whether the second event block contains instance-speci ic data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a25EventMessage 1.3.6.1.4.1.1123.3.1.2.22.1.25.1.9
Auxillary information releated to the event This text contains the name of the Probe
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tEventGenerationForFans 1.3.6.1.4.1.1123.3.1.2.22.1.26
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SEventGenerationForFans

eEventGenerationForFans 1.3.6.1.4.1.1123.3.1.2.22.1.26.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEventGenerationForFans  

a26EventType 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.1
The type of event that has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFanFailure(1)  

a26EventSeverity 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.2
The severity of this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(16), vNon-recoverable(32)  

a26IsEventState-based 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.3
The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a26EventStateKey 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.4
A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this this attribute's value is not defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a26AssociatedGroup 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.5
The class name of the group that is associated with the events defined in this Event Generation group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a26EventSystem 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a26EventSubsystem 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2)  

a26IsInstanceDataPresent 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.8
Indicates whether the second event block contains instance-speci ic data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vFalse(0), vTrue(1)  

a26EventMessage 1.3.6.1.4.1.1123.3.1.2.22.1.26.1.9
Auxillary information releated to the event This text contains the name of the Probe
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

tSymbiosHealth 1.3.6.1.4.1.1123.3.1.2.22.1.27
This group is the Symbios Vendor unique group for reporting the health.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSymbiosHealth

eSymbiosHealth 1.3.6.1.4.1.1123.3.1.2.22.1.27.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSymbiosHealth  

a27OverallHealthStatus 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.1
Status indicating the overall health.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vOk(3), vDegraded(4), vNon-recoverable(5)  

a27OverallControllerHealthStatus 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.2
Status indicating the overall health of the controllers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vOk(3), vDegraded(4), vNon-recoverable(5)  

a27Non-recoverableControllers 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.3
The number of controllers reporting a non-recoverable status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a27DegradedControllers 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.4
The number of controllers reporting a degraded status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a27OverallDeviceHealthStatus 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.5
Status indicating the overall health of the devices.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vOther(1), vUnknown(2), vOk(3), vDegraded(4), vNon-recoverable(5)  

a27Non-recoverableDevices 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.6
The number of devices reporting a non-recoverable status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a27DegradedDevices 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.7
The number of devices reporting a degraded status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a27DataValuesTimeStamp 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.8
The time the data values where last changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDateX  

a27HardwareTimeStamp 1.3.6.1.4.1.1123.3.1.2.22.1.27.1.9
The time the hardware recognition was last changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDateX  

tSymbiosController 1.3.6.1.4.1.1123.3.1.2.22.1.28
This group is a Symbios Vendor unique group for dealing with Controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SSymbiosController

eSymbiosController 1.3.6.1.4.1.1123.3.1.2.22.1.28.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SSymbiosController  

a28SymbiosControllerIndex 1.3.6.1.4.1.1123.3.1.2.22.1.28.1.1
An index into the Symbios Vendor Unique Controller table. This index corresponds to the Storage Controller index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

a28LastRunDateForDv 1.3.6.1.4.1.1123.3.1.2.22.1.28.1.2
This indicates the date and time of the last time Domain Validation was completed on this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDateX  

a28IoFactorForDvErrorRate 1.3.6.1.4.1.1123.3.1.2.22.1.28.1.3
This indicates the I/O factor to use for calculating the Domain Validation Error Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

a28TimeFactorForDvErrorRate 1.3.6.1.4.1.1123.3.1.2.22.1.28.1.4
This indicates the time factor to use for calculating the Domain Validation Error Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

a28ErrorCountFactorForDvErrorRate 1.3.6.1.4.1.1123.3.1.2.22.1.28.1.5
This indicates the error count factor to use for calculating the Domain Validation Error Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

a28DvStatus 1.3.6.1.4.1.1123.3.1.2.22.1.28.1.6
This indicates the status of Domain Validation for this controll r. Writing a value of 4 to this attribute will cause Domain Validation to be run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vNotApplicable(0), vDomainValidationCompletedByTheDriver(1), vDomainValidationCompletedWithNoChanges(2), vDomainValidationCompletedWithChanges(3), vDomainValidationCurrentlyRunning(4), vDomainValidationTerminated(5), vDomainValidationNeedsToBeRun(6)  

tMiftomib 1.3.6.1.4.1.1123.3.1.2.22.1.99
This group defines attributes required for DMI to SNMP translati n.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SMiftomib

eMiftomib 1.3.6.1.4.1.1123.3.1.2.22.1.99.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SMiftomib  

a99MibName 1.3.6.1.4.1.1123.3.1.2.22.1.99.1.1
The MIB name that defines this MIF
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a99MibOid 1.3.6.1.4.1.1123.3.1.2.22.1.99.1.2
The MIB OID that corresponds to this MIF
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

a99DisableTrap 1.3.6.1.4.1.1123.3.1.2.22.1.99.1.3
This attribute can be changed to disable sending oftraps from this component
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

trap1forStorageDevices 1
Self-Monitoring Warning (predictive failure - data recovery possible)
TRAP-TYPE    

trap2forStorageDevices 2
Self-Monitoring Warning (predictive failure - data recovery questionable)
TRAP-TYPE    

trap3forStorageController 3
Storage Controller Error (not responding)
TRAP-TYPE    

trap4forMassStorageAssociation 4
New Storage controller detected
TRAP-TYPE    

trap5forMassStorageAssociation 5
New device detected
TRAP-TYPE    

trap6forMassStorageAssociation 6
Existing controller changed
TRAP-TYPE    

trap7forMassStorageAssociation 7
Existing device changed
TRAP-TYPE