STN-ROUTER-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
IF-MIB	SPRING-TIDE-NETWORKS-SMI	STN-CHASSIS-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
IpAddress	Integer32	Unsigned32
TimeTicks	TEXTUAL-CONVENTION	DisplayString
MODULE-COMPLIANCE	InterfaceIndex	stnSystems
stnNotification	stnEngineIndex	stnEngineSlot
stnEngineCpu

Defined Types

InterfaceConnectionType
The type of an interface.
TEXTUAL-CONVENTION
	INTEGER	customer(1), provider(2), ppp(4), pppoe(5), home(6)

OperationState
Operational states of a router or an interface.
TEXTUAL-CONVENTION
	INTEGER	unassigned(1), bufpend(2), assignpend(3), assigned(4), unassignbufpend(5), unassignpend(6), failedassign(7), error(8)

StnRouterEntry
SEQUENCE
	stnRouterIndex	Integer32
	stnRouterType	INTEGER
	stnRouterState	OperationState
	stnRouterEngineID	Integer32
	stnRouterHomeIpAddress	IpAddress
	stnRouterEnabled	INTEGER
	stnRouterName	DisplayString
	stnRouterUpTime	TimeTicks
	stnRouterActiveSlot	Integer32
	stnRouterActiveCpu	Integer32
	stnRouterConfiguredSlot	Integer32
	stnRouterConfiguredCpu	Integer32
	stnRouterStandbySlot	Integer32
	stnRouterStandbyCpu	Integer32
	stnRouterReassignOnFault	INTEGER
	stnRouterServiceName	DisplayString
	stnRouterServiceDomain	Integer32
	stnRouterDefaultPolicyAction	INTEGER

StnSubnetInterfaceEntry
SEQUENCE
	stnSubnetInterfaceIndex	Unsigned32
	stnSubnetInterfaceEnabled	INTEGER
	stnSubnetInterfaceAddress	IpAddress
	stnSubnetInterfaceMask	IpAddress
	stnSubnetInterfaceVclid	Integer32
	stnSubnetInterfaceType	InterfaceConnectionType
	stnSubnetInterfaceState	OperationState
	stnSubnetInterfaceRouterIndex	Integer32
	stnSubnetInterfaceLinkType	INTEGER
	stnSubnetInterfaceLinkInstance	Integer32
	stnSubnetInterfaceForcedNextHop	IpAddress
	stnSubnetInterfaceServiceName	DisplayString

StnPppoeEntry
SEQUENCE
	stnPppoeIndex	Integer32
	stnPppoeType	InterfaceConnectionType
	stnPppoeState	OperationState
	stnPppoeVclid	Integer32
	stnPppoeIfIndex	InterfaceIndex
	stnPppoeRouterIndex	Integer32
	stnPppoeLinkType	INTEGER
	stnPppoeLinkInstance	Integer32

StnPppEntry
SEQUENCE
	stnPppIndex	Integer32
	stnPppType	InterfaceConnectionType
	stnPppState	OperationState
	stnPppVclid	Integer32
	stnPppIfIndex	InterfaceIndex
	stnPppRouterIndex	Integer32

Defined Values

stnRouter		1.3.6.1.4.1.3551.2.7
This MIB module describes managed objects of Spring Tide Networks virtual routers plus associated IP, PPP, and PPPOE interfaces.
MODULE-IDENTITY

stnRouterObjects		1.3.6.1.4.1.3551.2.7.1
OBJECT IDENTIFIER

stnRouterMibConformance		1.3.6.1.4.1.3551.2.7.2
OBJECT IDENTIFIER

stnRouterNAT		1.3.6.1.4.1.3551.2.7.1.5
OBJECT IDENTIFIER

stnRouterVEI		1.3.6.1.4.1.3551.2.7.1.6
OBJECT IDENTIFIER

stnRouterAtmVpn		1.3.6.1.4.1.3551.2.7.1.7
OBJECT IDENTIFIER

stnRouterVimuxMpls		1.3.6.1.4.1.3551.2.7.1.8
OBJECT IDENTIFIER

stnRouterVTI		1.3.6.1.4.1.3551.2.7.1.9
OBJECT IDENTIFIER

stnRouterTable		1.3.6.1.4.1.3551.2.7.1.1
A list of router entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StnRouterEntry

stnRouterEntry		1.3.6.1.4.1.3551.2.7.1.1.1
Entry contains information about a particular router.
Status: current	Access: not-accessible
OBJECT-TYPE
	StnRouterEntry

stnRouterIndex		1.3.6.1.4.1.3551.2.7.1.1.1.1
A sequence number that identifies a router entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterType		1.3.6.1.4.1.3551.2.7.1.1.1.2
The router type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	customer(1), provider(2), admin(3)

stnRouterState		1.3.6.1.4.1.3551.2.7.1.1.1.3
The operational state of the router.
Status: current	Access: read-only
OBJECT-TYPE
	OperationState

stnRouterEngineID		1.3.6.1.4.1.3551.2.7.1.1.1.4
The engine to which this router is currently assigned.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterHomeIpAddress		1.3.6.1.4.1.3551.2.7.1.1.1.5
The Home IP address of this router.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

stnRouterEnabled		1.3.6.1.4.1.3551.2.7.1.1.1.6
The variable to indicate if this router is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

stnRouterName		1.3.6.1.4.1.3551.2.7.1.1.1.7
The name of this router.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

stnRouterUpTime		1.3.6.1.4.1.3551.2.7.1.1.1.8
The time (in hundredths of a second) since the router was last re-initialized.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

stnRouterActiveSlot		1.3.6.1.4.1.3551.2.7.1.1.1.9
The slot/module to which this router is currently assigned.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterActiveCpu		1.3.6.1.4.1.3551.2.7.1.1.1.10
The CPU to which this router is currently assigned.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterConfiguredSlot		1.3.6.1.4.1.3551.2.7.1.1.1.11
The configured slot/module for this router.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterConfiguredCpu		1.3.6.1.4.1.3551.2.7.1.1.1.12
The configured CPU for this router.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterStandbySlot		1.3.6.1.4.1.3551.2.7.1.1.1.13
The standby slot/module for this router.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterStandbyCpu		1.3.6.1.4.1.3551.2.7.1.1.1.14
The standby CPU for this router.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterReassignOnFault		1.3.6.1.4.1.3551.2.7.1.1.1.15
The variable to indicate if this router should be reassigned if the module where to fail.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

stnRouterServiceName		1.3.6.1.4.1.3551.2.7.1.1.1.16
The service to which this router belongs.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..64)

stnRouterServiceDomain		1.3.6.1.4.1.3551.2.7.1.1.1.17
The service domain to which this router belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterDefaultPolicyAction		1.3.6.1.4.1.3551.2.7.1.1.1.18
Action to take when a packet does not match any policies.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

stnSubnetInterfaceTable		1.3.6.1.4.1.3551.2.7.1.2
A list of sub-network interface entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StnSubnetInterfaceEntry

stnSubnetInterfaceEntry		1.3.6.1.4.1.3551.2.7.1.2.1
Entry contains information about a particular sub-network interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	StnSubnetInterfaceEntry

stnSubnetInterfaceIndex		1.3.6.1.4.1.3551.2.7.1.2.1.1
A sequence number that identifies a sub-network interface entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

stnSubnetInterfaceEnabled		1.3.6.1.4.1.3551.2.7.1.2.1.2
Enable or disable the sub-network interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

stnSubnetInterfaceAddress		1.3.6.1.4.1.3551.2.7.1.2.1.3
The IP address of this interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

stnSubnetInterfaceMask		1.3.6.1.4.1.3551.2.7.1.2.1.4
The sub-network mask of this interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

stnSubnetInterfaceVclid		1.3.6.1.4.1.3551.2.7.1.2.1.5
The vcl ID associated with this sub-network interface.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32

stnSubnetInterfaceType		1.3.6.1.4.1.3551.2.7.1.2.1.6
The interface type.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceConnectionType

stnSubnetInterfaceState		1.3.6.1.4.1.3551.2.7.1.2.1.7
The operational state of the sub-network interface.
Status: current	Access: read-only
OBJECT-TYPE
	OperationState

stnSubnetInterfaceRouterIndex		1.3.6.1.4.1.3551.2.7.1.2.1.8
The router this sub-network interface is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnSubnetInterfaceLinkType		1.3.6.1.4.1.3551.2.7.1.2.1.9
Indicates the type of link the subnet interface is configured over.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	vcLink(1), vei(2), home(3)

stnSubnetInterfaceLinkInstance		1.3.6.1.4.1.3551.2.7.1.2.1.10
The instance of the configuration record for the link the subnet interface is configured over.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnSubnetInterfaceForcedNextHop		1.3.6.1.4.1.3551.2.7.1.2.1.11
The IP address of the next hop router that all IP traffic received on this interface will be sent to
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

stnSubnetInterfaceServiceName		1.3.6.1.4.1.3551.2.7.1.2.1.12
The service to which this interface belongs.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..64)

stnPppoeTable		1.3.6.1.4.1.3551.2.7.1.3
A list of PPPOE interface entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StnPppoeEntry

stnPppoeEntry		1.3.6.1.4.1.3551.2.7.1.3.1
Entry contains information about a particular PPPOE interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	StnPppoeEntry

stnPppoeIndex		1.3.6.1.4.1.3551.2.7.1.3.1.1
A sequence number that identifies a PPPOE interface entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnPppoeType		1.3.6.1.4.1.3551.2.7.1.3.1.2
The interface type.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceConnectionType

stnPppoeState		1.3.6.1.4.1.3551.2.7.1.3.1.3
The operational state of the PPPOE interface.
Status: current	Access: read-only
OBJECT-TYPE
	OperationState

stnPppoeVclid		1.3.6.1.4.1.3551.2.7.1.3.1.4
The vcl ID associated with this PPPOE interface.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32

stnPppoeIfIndex		1.3.6.1.4.1.3551.2.7.1.3.1.5
The ifindex.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

stnPppoeRouterIndex		1.3.6.1.4.1.3551.2.7.1.3.1.6
The router this PPPOE interface is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnPppoeLinkType		1.3.6.1.4.1.3551.2.7.1.3.1.7
Indicates the type of link the PPPoE interface is configured over.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	vcLink(1), vei(2)

stnPppoeLinkInstance		1.3.6.1.4.1.3551.2.7.1.3.1.8
The instance of the configuration record for the link the PPPoE interface is configured over.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnPppTable		1.3.6.1.4.1.3551.2.7.1.4
A list of PPP interface entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StnPppEntry

stnPppEntry		1.3.6.1.4.1.3551.2.7.1.4.1
Entry contains information about a particular session.
Status: current	Access: not-accessible
OBJECT-TYPE
	StnPppEntry

stnPppIndex		1.3.6.1.4.1.3551.2.7.1.4.1.1
A sequence number that identifies a PPP interface entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnPppType		1.3.6.1.4.1.3551.2.7.1.4.1.2
The interface type.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceConnectionType

stnPppState		1.3.6.1.4.1.3551.2.7.1.4.1.3
The operational state or the PPP interface.
Status: current	Access: read-only
OBJECT-TYPE
	OperationState

stnPppVclid		1.3.6.1.4.1.3551.2.7.1.4.1.4
The vcl ID associated with this PPP interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnPppIfIndex		1.3.6.1.4.1.3551.2.7.1.4.1.5
The ifindex.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

stnPppRouterIndex		1.3.6.1.4.1.3551.2.7.1.4.1.6
The router this PPP interface is associated with.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

stnRouterUp		1.3.6.1.4.1.3551.2.100.0.26
A stnRouterUp trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the assigned(4) state for one of its routers. The generation of this trap can be controlled by the RouterUpTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnRouterDown		1.3.6.1.4.1.3551.2.100.0.27
A stnRouterDown trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its routers. The generation of this trap can be controlled by the RouterDownTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnRouterReassigned		1.3.6.1.4.1.3551.2.100.0.28
A stnRouterReassigned trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the the assigned(1) state for one of its routers. The generation of this trap can be controlled by the RouterReassignedTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnRouterReassignFailure		1.3.6.1.4.1.3551.2.100.0.29
A stnRouterReassignFailure trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its routers. The generation of this trap can be controlled by the RouterReassignFailureTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnSubnetIfAssignFailure		1.3.6.1.4.1.3551.2.100.0.30
A stnSubnetIfAssignFailure trap signifies that the agent entity has detected that the stnSubnetInterfaceState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its interfaces. The generation of this trap can be controlled by the stnEnableSubnetInterfaceTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnConfigAuditRouterFailure		1.3.6.1.4.1.3551.2.100.0.33
A stnConfigAuditRouterFailure trap signifies that the agent entity has detected an inconsistency between an active and configured routers after a failover. The generation of this trap can be controlled by the CfgAuditRouterTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnConfigAuditSubnetIfFailure		1.3.6.1.4.1.3551.2.100.0.34
A stnConfigAuditSubnetIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured subnet interface after a failover. The generation of this trap can be controlled by the CfgAuditSubnetIfTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnConfigAuditPppoeIfFailure		1.3.6.1.4.1.3551.2.100.0.35
A stnConfigAuditPppoeIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured PPPOE interface after a failover. The generation of this trap can be controlled by the CfgAuditPppoeIfTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE

stnConfigAuditPppIfFailure		1.3.6.1.4.1.3551.2.100.0.36
A stnConfigAuditPppIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured PPP interface after a failover. The generation of this trap can be controlled by the CfgAuditPppIfTraps configuration object.
Status: current	Access: read-only
NOTIFICATION-TYPE