STN-PPTP-MIB

File: STN-PPTP-MIB.mib (66099 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB SPRING-TIDE-NETWORKS-SMI SPRING-TIDE-NETWORKS-TC

Imported symbols

Integer32 Counter32 Gauge32
IpAddress MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE TEXTUAL-CONVENTION DisplayString
RowStatus TruthValue OBJECT-GROUP
MODULE-COMPLIANCE InterfaceIndex stnTmpProtocols
StnDomainMapType

Defined Types

MilliSeconds  
A period of time measured in units of .001 of seconds when used in conjunction with the DISPLAY-HINT will show seconds and fractions of second with a resolution of .001 of a second.
TEXTUAL-CONVENTION    
  Integer32 0..2147483646  

StnPptpDomainConfigEntry  
SEQUENCE    
  stnPptpDomainConfigIdentifier DisplayString
  stnPptpDomainConfigAdminState INTEGER
  stnPptpDomainConfigAuthentication INTEGER
  stnPptpDomainConfigSecret OCTET STRING
  stnPptpDomainConfigTunnelSecurity INTEGER
  stnPptpDomainConfigTunnelHelloInterval Integer32
  stnPptpDomainConfigTunnelIdleTimeout Integer32
  stnPptpDomainConfigControlRWS Integer32
  stnPptpDomainConfigControlRetransmissions Integer32
  stnPptpDomainConfigPayloadSequencing TruthValue
  stnPptpDomainConfigPayloadRWS Integer32
  stnPptpDomainConfigDelayedAckTimeout MilliSeconds
  stnPptpDomainConfigReassemblyTimeout MilliSeconds
  stnPptpDomainConfigStatus RowStatus

StnPptpDomainStatsEntry  
SEQUENCE    
  stnPptpDomainStatsIdentifier DisplayString
  stnPptpDomainStatsTotalTunnels Counter32
  stnPptpDomainStatsFailedTunnels Counter32
  stnPptpDomainStatsFailedAuthentications Counter32
  stnPptpDomainStatsActiveTunnels Gauge32
  stnPptpDomainStatsTotalSessions Counter32
  stnPptpDomainStatsFailedSessions Counter32
  stnPptpDomainStatsActiveSessions Gauge32
  stnPptpDomainStatsControlRecvOctets Counter32
  stnPptpDomainStatsControlRecvPackets Counter32
  stnPptpDomainStatsControlSendOctets Counter32
  stnPptpDomainStatsControlSendPackets Counter32
  stnPptpDomainStatsPayloadRecvOctets Counter32
  stnPptpDomainStatsPayloadRecvPackets Counter32
  stnPptpDomainStatsPayloadRecvDiscards Counter32
  stnPptpDomainStatsPayloadSendOctets Counter32
  stnPptpDomainStatsPayloadSendPackets Counter32

StnPptpTunnelConfigEntry  
SEQUENCE    
  stnPptpTunnelConfigIfIndex InterfaceIndex
  stnPptpTunnelConfigAuthentication INTEGER
  stnPptpTunnelConfigSecret OCTET STRING
  stnPptpTunnelConfigSecurity INTEGER
  stnPptpTunnelConfigHelloInterval Integer32
  stnPptpTunnelConfigIdleTimeout Integer32
  stnPptpTunnelConfigControlRWS Integer32
  stnPptpTunnelConfigControlRetransmissions Integer32
  stnPptpTunnelConfigPayloadSequencing TruthValue
  stnPptpTunnelConfigPayloadRWS Integer32
  stnPptpTunnelConfigDelayedAckTimeout MilliSeconds
  stnPptpTunnelConfigReassemblyTimeout MilliSeconds
  stnPptpTunnelConfigTransport INTEGER

StnPptpTunnelStatsEntry  
SEQUENCE    
  stnPptpTunnelStatsIfIndex InterfaceIndex
  stnPptpTunnelStatsLocalTID Integer32
  stnPptpTunnelStatsState INTEGER
  stnPptpTunnelStatsInitiated INTEGER
  stnPptpTunnelStatsRemoteHostName DisplayString
  stnPptpTunnelStatsRemoteVendorName DisplayString
  stnPptpTunnelStatsRemoteFirmwareRevision Integer32
  stnPptpTunnelStatsRemoteProtocolVersion OCTET STRING
  stnPptpTunnelStatsBearerCapabilities INTEGER
  stnPptpTunnelStatsFramingCapabilities INTEGER
  stnPptpTunnelStatsControlRecvPackets Counter32
  stnPptpTunnelStatsControlSendPackets Counter32
  stnPptpTunnelStatsTotalSessions Counter32
  stnPptpTunnelStatsFailedSessions Counter32
  stnPptpTunnelStatsActiveSessions Gauge32
  stnPptpTunnelStatsLastResultCode Integer32
  stnPptpTunnelStatsLastErrorCode Integer32
  stnPptpTunnelStatsLastErrorMessage DisplayString

StnPptpSessionStatsEntry  
SEQUENCE    
  stnPptpSessionStatsTunnelIfIndex InterfaceIndex
  stnPptpSessionStatsHLIfIndex InterfaceIndex
  stnPptpSessionStatsLocalCID Integer32
  stnPptpSessionStatsRemoteCID Integer32
  stnPptpSessionStatsUserName DisplayString
  stnPptpSessionStatsState INTEGER
  stnPptpSessionStatsCallType INTEGER
  stnPptpSessionStatsCallSerialNumber Integer32
  stnPptpSessionStatsTxConnectSpeed Integer32
  stnPptpSessionStatsRxConnectSpeed Integer32
  stnPptpSessionStatsCallBearerType INTEGER
  stnPptpSessionStatsFramingType INTEGER
  stnPptpSessionStatsPhysChanId Integer32
  stnPptpSessionStatsDNIS DisplayString
  stnPptpSessionStatsCLID DisplayString
  stnPptpSessionStatsSubAddress DisplayString
  stnPptpSessionStatsPrivateGroupID DisplayString
  stnPptpSessionStatsLocalRWS Integer32
  stnPptpSessionStatsRemoteInitialRWS Integer32
  stnPptpSessionStatsRemotePPD Integer32
  stnPptpSessionStatsRecvZLB Counter32
  stnPptpSessionStatsOutSequence Counter32
  stnPptpSessionStatsSendZLB Counter32
  stnPptpSessionStatsAckTimeouts Counter32
  stnPptpSesssionStatsCurrentRemoteRWS Gauge32
  stnPptpSessionStatsSendSeq Integer32
  stnPptpSessionStatsSendSeqAck Integer32
  stnPptpSessionStatsRecvSeq Integer32
  stnPptpSessionStatsRecvSeqAck Integer32

StnPptpTunnelMapEntry  
SEQUENCE    
  stnPptpTunnelMapLocalTID Integer32
  stnPptpTunnelMapIfIndex InterfaceIndex

StnPptpSessionMapEntry  
SEQUENCE    
  stnPptpSessionMapHLIfIndex InterfaceIndex
  stnPptpSessionMapTunnelIfIndex InterfaceIndex
  stnPptpSessionMapLocalCID Integer32

StnPptpDomainMapTableEntry  
SEQUENCE    
  stnPptpDomainMapIdentifier DisplayString
  stnPptpDomainMapHostName DisplayString
  stnPptpDomainMapType StnDomainMapType
  stnPptpDomainMapTypeInfo DisplayString

Defined Values

stnPptp 1.3.6.1.4.1.3551.4.1.10
The MIB module that describes managed objects of general use by the Point-to-Point Transport Protocol.
MODULE-IDENTITY    

stnPptpObjects 1.3.6.1.4.1.3551.4.1.10.1
OBJECT IDENTIFIER    

stnPptpMibConformance 1.3.6.1.4.1.3551.4.1.10.2
OBJECT IDENTIFIER    

stnPptpTraps 1.3.6.1.4.1.3551.4.1.10.3
OBJECT IDENTIFIER    

stnPptpScalar 1.3.6.1.4.1.3551.4.1.10.1.1
OBJECT IDENTIFIER    

stnPptpConfig 1.3.6.1.4.1.3551.4.1.10.1.1.1
OBJECT IDENTIFIER    

stnPptpStats 1.3.6.1.4.1.3551.4.1.10.1.1.2
OBJECT IDENTIFIER    

stnPptpAdminState 1.3.6.1.4.1.3551.4.1.10.1.1.1.1
This object defines the administrative state of this PPTP tunnel domain. Setting this object to 'disabled' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), drain(3)  

stnPptpProtocolVersion 1.3.6.1.4.1.3551.4.1.10.1.1.2.1
Vector of supported PPTP protocol version and revision numbers. Supported versions are identified via a two octet pairing where the first octet indicates the version and the second octet contains the revision.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2..256)  

stnPptpVendorName 1.3.6.1.4.1.3551.4.1.10.1.1.2.2
This object identifies the Vendor name of the PPTP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpFirmwareRev 1.3.6.1.4.1.3551.4.1.10.1.1.2.3
This object defines the firmware revision for the PPTP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpDomainConfigTable 1.3.6.1.4.1.3551.4.1.10.1.2
The PPTP Domain configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpDomainConfigEntry

stnPptpDomainConfigEntry 1.3.6.1.4.1.3551.4.1.10.1.2.1
An PPTP Domain configuration entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpDomainConfigEntry  

stnPptpDomainConfigIdentifier 1.3.6.1.4.1.3551.4.1.10.1.2.1.1
This object is not used.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

stnPptpDomainConfigAdminState 1.3.6.1.4.1.3551.4.1.10.1.2.1.2
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), drain(3)  

stnPptpDomainConfigAuthentication 1.3.6.1.4.1.3551.4.1.10.1.2.1.3
This object is not used
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), simple(2), challenge(3)  

stnPptpDomainConfigSecret 1.3.6.1.4.1.3551.4.1.10.1.2.1.4
This object is not used
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

stnPptpDomainConfigTunnelSecurity 1.3.6.1.4.1.3551.4.1.10.1.2.1.5
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), other(2), ipSec(3)  

stnPptpDomainConfigTunnelHelloInterval 1.3.6.1.4.1.3551.4.1.10.1.2.1.6
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..3600  

stnPptpDomainConfigTunnelIdleTimeout 1.3.6.1.4.1.3551.4.1.10.1.2.1.7
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

stnPptpDomainConfigControlRWS 1.3.6.1.4.1.3551.4.1.10.1.2.1.8
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..64  

stnPptpDomainConfigControlRetransmissions 1.3.6.1.4.1.3551.4.1.10.1.2.1.9
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..32  

stnPptpDomainConfigPayloadSequencing 1.3.6.1.4.1.3551.4.1.10.1.2.1.10
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

stnPptpDomainConfigPayloadRWS 1.3.6.1.4.1.3551.4.1.10.1.2.1.11
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpDomainConfigDelayedAckTimeout 1.3.6.1.4.1.3551.4.1.10.1.2.1.12
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  MilliSeconds  

stnPptpDomainConfigReassemblyTimeout 1.3.6.1.4.1.3551.4.1.10.1.2.1.13
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  MilliSeconds  

stnPptpDomainConfigStatus 1.3.6.1.4.1.3551.4.1.10.1.2.1.14
This object is not used.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

stnPptpDomainStatsTable 1.3.6.1.4.1.3551.4.1.10.1.3
The PPTP Domain Status and Statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpDomainStatsEntry

stnPptpDomainStatsEntry 1.3.6.1.4.1.3551.4.1.10.1.3.1
An PPTP Domain Stats entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpDomainStatsEntry  

stnPptpDomainStatsIdentifier 1.3.6.1.4.1.3551.4.1.10.1.3.1.1
The identifier, usually in the form of a Domain Name (full or partial), describing a single tunnel endpoint or a domain of tunnel endpoints.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

stnPptpDomainStatsTotalTunnels 1.3.6.1.4.1.3551.4.1.10.1.3.1.2
This object returns the total number of tunnels that have successfully reached the established state for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsFailedTunnels 1.3.6.1.4.1.3551.4.1.10.1.3.1.3
This object returns the number of tunnels that failed to reach the established state for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsFailedAuthentications 1.3.6.1.4.1.3551.4.1.10.1.3.1.4
This object is not used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsActiveTunnels 1.3.6.1.4.1.3551.4.1.10.1.3.1.5
This object returns the number of tunnels that are currently active for this domain.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stnPptpDomainStatsTotalSessions 1.3.6.1.4.1.3551.4.1.10.1.3.1.6
This object returns the total number of sessions that have successfully reached the established state for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsFailedSessions 1.3.6.1.4.1.3551.4.1.10.1.3.1.7
This object returns the number of sessions that failed to reach the established state for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsActiveSessions 1.3.6.1.4.1.3551.4.1.10.1.3.1.8
This object returns the number of sessions that are currently active for this domain.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stnPptpDomainStatsControlRecvOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.9
This object returns the number of control channel octets received for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsControlRecvPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.10
This object returns the number of control packets received for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsControlSendOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.11
This object returns the number of control channel octets that were transmitted to tunnel endpoints for this domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsControlSendPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.12
This object returns the number of control packets that were transmitted to tunnel endpoints for this domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsPayloadRecvOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.13
This object returns the number of payload channel octets that were received for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsPayloadRecvPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.14
This object returns the number of payload packets that were received for this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsPayloadRecvDiscards 1.3.6.1.4.1.3551.4.1.10.1.3.1.15
This object returns the number of received payload packets that were discarded by this this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsPayloadSendOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.16
This object returns the number of payload channel octets that were transmitted to tunnel peers within this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpDomainStatsPayloadSendPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.17
This object returns the number of payload packets that were transmitted to tunnel peers within this tunnel domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpTunnelConfigTable 1.3.6.1.4.1.3551.4.1.10.1.4
The PPTP tunnel configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpTunnelConfigEntry

stnPptpTunnelConfigEntry 1.3.6.1.4.1.3551.4.1.10.1.4.1
A PPTP tunnel interface configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpTunnelConfigEntry  

stnPptpTunnelConfigIfIndex 1.3.6.1.4.1.3551.4.1.10.1.4.1.1
This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type PPTP.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpTunnelConfigAuthentication 1.3.6.1.4.1.3551.4.1.10.1.4.1.2
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), simple(2), challenge(3)  

stnPptpTunnelConfigSecret 1.3.6.1.4.1.3551.4.1.10.1.4.1.3
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

stnPptpTunnelConfigSecurity 1.3.6.1.4.1.3551.4.1.10.1.4.1.4
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), other(2), ipsec(3)  

stnPptpTunnelConfigHelloInterval 1.3.6.1.4.1.3551.4.1.10.1.4.1.5
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3600  

stnPptpTunnelConfigIdleTimeout 1.3.6.1.4.1.3551.4.1.10.1.4.1.6
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

stnPptpTunnelConfigControlRWS 1.3.6.1.4.1.3551.4.1.10.1.4.1.7
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..64  

stnPptpTunnelConfigControlRetransmissions 1.3.6.1.4.1.3551.4.1.10.1.4.1.8
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

stnPptpTunnelConfigPayloadSequencing 1.3.6.1.4.1.3551.4.1.10.1.4.1.9
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

stnPptpTunnelConfigPayloadRWS 1.3.6.1.4.1.3551.4.1.10.1.4.1.10
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpTunnelConfigDelayedAckTimeout 1.3.6.1.4.1.3551.4.1.10.1.4.1.11
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  MilliSeconds  

stnPptpTunnelConfigReassemblyTimeout 1.3.6.1.4.1.3551.4.1.10.1.4.1.12
This object is not used.
Status: current Access: read-write
OBJECT-TYPE    
  MilliSeconds  

stnPptpTunnelConfigTransport 1.3.6.1.4.1.3551.4.1.10.1.4.1.13
This object defines the underlying transport media that is in use for this tunnel entry. Different tunnel transports may define MIB extensions to the PPTP tunnel table to realize the transport layer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipGre(1)  

stnPptpTunnelStatsTable 1.3.6.1.4.1.3551.4.1.10.1.5
The PPTP tunnel status and statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpTunnelStatsEntry

stnPptpTunnelStatsEntry 1.3.6.1.4.1.3551.4.1.10.1.5.1
An PPTP tunnel interface stats entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpTunnelStatsEntry  

stnPptpTunnelStatsIfIndex 1.3.6.1.4.1.3551.4.1.10.1.5.1.1
This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type PPTP.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpTunnelStatsLocalTID 1.3.6.1.4.1.3551.4.1.10.1.5.1.2
This object contains the local tunnel Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpTunnelStatsState 1.3.6.1.4.1.3551.4.1.10.1.5.1.3
This field contains the current state of the control tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tunnelIdle(1), tunnelConnecting(2), tunnelEstablished(3), tunnelDisconnecting(4)  

stnPptpTunnelStatsInitiated 1.3.6.1.4.1.3551.4.1.10.1.5.1.4
This object indicates whether the tunnel was initiated locally or by the remote tunnel peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locally(1), remotely(2)  

stnPptpTunnelStatsRemoteHostName 1.3.6.1.4.1.3551.4.1.10.1.5.1.5
This object contains the host name as discovered during the tunnel establishment phase
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpTunnelStatsRemoteVendorName 1.3.6.1.4.1.3551.4.1.10.1.5.1.6
This object identifies the vendor name of the peer's PPTP implementation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpTunnelStatsRemoteFirmwareRevision 1.3.6.1.4.1.3551.4.1.10.1.5.1.7
This object contains the tunnel peer's firmware revision number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpTunnelStatsRemoteProtocolVersion 1.3.6.1.4.1.3551.4.1.10.1.5.1.8
This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

stnPptpTunnelStatsBearerCapabilities 1.3.6.1.4.1.3551.4.1.10.1.5.1.9
This object describes the Bearer Capabilities of the tunnel peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), digital(2), analog(3), digitalAnalog(4)  

stnPptpTunnelStatsFramingCapabilities 1.3.6.1.4.1.3551.4.1.10.1.5.1.10
This object describes the Framing Capabilities of the tunnel peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), sync(2), async(3), syncAsync(4)  

stnPptpTunnelStatsControlRecvPackets 1.3.6.1.4.1.3551.4.1.10.1.5.1.11
This object contains the number of control packets received on the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpTunnelStatsControlSendPackets 1.3.6.1.4.1.3551.4.1.10.1.5.1.12
This object contains the number of control packets that were transmitted to the tunnel peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpTunnelStatsTotalSessions 1.3.6.1.4.1.3551.4.1.10.1.5.1.13
This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpTunnelStatsFailedSessions 1.3.6.1.4.1.3551.4.1.10.1.5.1.14
This object contains the total number of sessions that were initiated but failed to reach the established phase.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpTunnelStatsActiveSessions 1.3.6.1.4.1.3551.4.1.10.1.5.1.15
This object contains the total number of sessions in the established state for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stnPptpTunnelStatsLastResultCode 1.3.6.1.4.1.3551.4.1.10.1.5.1.16
This object contains the last value of the result code as described in the Result Code which caused the tunnel to disconnect.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpTunnelStatsLastErrorCode 1.3.6.1.4.1.3551.4.1.10.1.5.1.17
This object contains the last value of the error code as described in the Result Code which caused the tunnel to disconnect.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpTunnelStatsLastErrorMessage 1.3.6.1.4.1.3551.4.1.10.1.5.1.18
This object contains the last value of the optional message as described in the Result Code which caused the tunnel to disconnect.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpSessionStatsTable 1.3.6.1.4.1.3551.4.1.10.1.7
The PPTP session status and statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpSessionStatsEntry

stnPptpSessionStatsEntry 1.3.6.1.4.1.3551.4.1.10.1.7.1
An PPTP session interface stats entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpSessionStatsEntry  

stnPptpSessionStatsTunnelIfIndex 1.3.6.1.4.1.3551.4.1.10.1.7.1.1
This object identifies the sessions associated PPTP tunnel ifIndex value.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpSessionStatsHLIfIndex 1.3.6.1.4.1.3551.4.1.10.1.7.1.2
This object identifies the ifIndex value of the interface that is either below (Lower) the tunnel (if this tunnel endpoint is a PAC) or above (Higher) the tunnel (if this tunnel endpoint is a PNS). For example this could be a DS0 ifIndex on a PAC or it would be the PPP ifIndex on the PNS.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpSessionStatsLocalCID 1.3.6.1.4.1.3551.4.1.10.1.7.1.3
This object contains the local call identifier for the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsRemoteCID 1.3.6.1.4.1.3551.4.1.10.1.7.1.4
This object is not used.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsUserName 1.3.6.1.4.1.3551.4.1.10.1.7.1.5
This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpSessionStatsState 1.3.6.1.4.1.3551.4.1.10.1.7.1.6
This object contains the current state of the session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sessionIdle(1), sessionConnecting(2), sessionEstablished(3), sessionDisconnecting(4)  

stnPptpSessionStatsCallType 1.3.6.1.4.1.3551.4.1.10.1.7.1.7
This object indicates the type of call and the role this tunnel peer is providing for this session. For example, pacIncoming(1) indicates that this tunnel peer is acting as a PAC and generated a Incoming-Call-Request to the tunnel peer (the PNS). Note that tunnel peers can be both PAC and PNS simultaneously.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pacIncoming(1), pnsIncoming(2), pacOutgoing(3), pnsOutgoing(4)  

stnPptpSessionStatsCallSerialNumber 1.3.6.1.4.1.3551.4.1.10.1.7.1.8
This object contains the serial number that has been assigned to this session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpSessionStatsTxConnectSpeed 1.3.6.1.4.1.3551.4.1.10.1.7.1.9
This object returns the last known transmit baud rate for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpSessionStatsRxConnectSpeed 1.3.6.1.4.1.3551.4.1.10.1.7.1.10
This object returns the last known receive baud rate for this session established.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpSessionStatsCallBearerType 1.3.6.1.4.1.3551.4.1.10.1.7.1.11
This object describes the bearer type of this session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), digital(2), analog(3)  

stnPptpSessionStatsFramingType 1.3.6.1.4.1.3551.4.1.10.1.7.1.12
This object describes the framing type of this session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), sync(2), async(3)  

stnPptpSessionStatsPhysChanId 1.3.6.1.4.1.3551.4.1.10.1.7.1.13
This object contains the physical channel identifier for the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpSessionStatsDNIS 1.3.6.1.4.1.3551.4.1.10.1.7.1.14
This object identifies the Dialed Number Information String that the PAC obtained from the network for the session. If no DNIS was provided then a null string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpSessionStatsCLID 1.3.6.1.4.1.3551.4.1.10.1.7.1.15
This object identifies the Calling Line ID that the PAC obtained from the network for the session. If no CLID was provided then a null string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpSessionStatsSubAddress 1.3.6.1.4.1.3551.4.1.10.1.7.1.16
This object identifies the Sub Address that the PAC obtained from the network for the session. If no Sub Address was provided then a null string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpSessionStatsPrivateGroupID 1.3.6.1.4.1.3551.4.1.10.1.7.1.17
This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpSessionStatsLocalRWS 1.3.6.1.4.1.3551.4.1.10.1.7.1.18
This object returns the local send window size for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsRemoteInitialRWS 1.3.6.1.4.1.3551.4.1.10.1.7.1.19
This object returns the initial remote send window size for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsRemotePPD 1.3.6.1.4.1.3551.4.1.10.1.7.1.20
This object contains the Packet Processing Delay for the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stnPptpSessionStatsRecvZLB 1.3.6.1.4.1.3551.4.1.10.1.7.1.21
This object returns the total number of Zero Length Body acknowlegement payload packets received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpSessionStatsOutSequence 1.3.6.1.4.1.3551.4.1.10.1.7.1.22
This object returns the total number of packets received for this session which were received out of sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpSessionStatsSendZLB 1.3.6.1.4.1.3551.4.1.10.1.7.1.23
This object returns the total number of Zero Length Body acknowledgement packets transmitted on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpSessionStatsAckTimeouts 1.3.6.1.4.1.3551.4.1.10.1.7.1.24
This object returns the total number of acknowledgement timeouts seen on payload packets for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stnPptpSesssionStatsCurrentRemoteRWS 1.3.6.1.4.1.3551.4.1.10.1.7.1.25
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..65535  

stnPptpSessionStatsSendSeq 1.3.6.1.4.1.3551.4.1.10.1.7.1.26
This object contains the next send sequence number for for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsSendSeqAck 1.3.6.1.4.1.3551.4.1.10.1.7.1.27
This object contains the send sequence number that the tunnel peer has acknowledged for the payload channel. The flow control state can be determined by subtracting the stnPptpSessionStatsSendSeq from stnPptpSessionStatsSendSeqAck and comparing this value to stnPptpSesssionStatsCurrentRemoteRWS.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsRecvSeq 1.3.6.1.4.1.3551.4.1.10.1.7.1.28
This object contains the next receive sequence number expected to be received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpSessionStatsRecvSeqAck 1.3.6.1.4.1.3551.4.1.10.1.7.1.29
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpTunnelMapTable 1.3.6.1.4.1.3551.4.1.10.1.8
The PPTP Tunnel index mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpTunnelMapEntry

stnPptpTunnelMapEntry 1.3.6.1.4.1.3551.4.1.10.1.8.1
An PPTP tunnel index map entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpTunnelMapEntry  

stnPptpTunnelMapLocalTID 1.3.6.1.4.1.3551.4.1.10.1.8.1.1
This object contains the local tunnel Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpTunnelMapIfIndex 1.3.6.1.4.1.3551.4.1.10.1.8.1.2
This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type PPTP.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpSessionMapTable 1.3.6.1.4.1.3551.4.1.10.1.9
The PPTP Session index mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpSessionMapEntry

stnPptpSessionMapEntry 1.3.6.1.4.1.3551.4.1.10.1.9.1
An PPTP Session index map entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpSessionMapEntry  

stnPptpSessionMapHLIfIndex 1.3.6.1.4.1.3551.4.1.10.1.9.1.1
This object identifies the ifIndex value of the interface that is either below (Lower) the tunnel (if this tunnel endpoint is a PAC) or above (Higher) the tunnel (if this tunnel endpoint is a PNS). For example this could be a DS0 ifIndex on a PAC or it would be the PPP ifIndex on the PNS.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpSessionMapTunnelIfIndex 1.3.6.1.4.1.3551.4.1.10.1.9.1.2
This object identifies the sessions associated PPTP tunnel ifIndex value.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

stnPptpSessionMapLocalCID 1.3.6.1.4.1.3551.4.1.10.1.9.1.3
This object contains the local call identifier for the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

stnPptpDomainMapTable 1.3.6.1.4.1.3551.4.1.10.1.10
This table provides a mapping between PPTP Domain identifiers, hostnames, and IP-ATM information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StnPptpDomainMapTableEntry

stnPptpDomainMapTableEntry 1.3.6.1.4.1.3551.4.1.10.1.10.1
An entry within the STN PPTP Map Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  StnPptpDomainMapTableEntry  

stnPptpDomainMapIdentifier 1.3.6.1.4.1.3551.4.1.10.1.10.1.1
PPTP Domain Identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

stnPptpDomainMapHostName 1.3.6.1.4.1.3551.4.1.10.1.10.1.2
The hostname that maps to the PPTP Domain Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpDomainMapType 1.3.6.1.4.1.3551.4.1.10.1.10.1.3
Identifiers whether the PPTP Domain maps to an IP subnet or an ATM circuit.
Status: current Access: read-only
OBJECT-TYPE    
  StnDomainMapType  

stnPptpDomainMapTypeInfo 1.3.6.1.4.1.3551.4.1.10.1.10.1.4
Provides either IP or ATM specific display info.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpGroups 1.3.6.1.4.1.3551.4.1.10.2.1
OBJECT IDENTIFIER    

stnPptpCompliances 1.3.6.1.4.1.3551.4.1.10.2.2
OBJECT IDENTIFIER    

stnPptpCompliance 1.3.6.1.4.1.3551.4.1.10.2.2.1
The compliance statement for SNMPv2 entities which implement the PPTP MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

stnPptpConfigGroup 1.3.6.1.4.1.3551.4.1.10.2.1.1
A collection of objects providing configuration information of the PPTP protocol, tunnels and sessions.
Status: current Access: read-only
OBJECT-GROUP    

stnPptpStatsGroup 1.3.6.1.4.1.3551.4.1.10.2.1.2
A collection of objects providing status and statistics of the PPTP protocol, tunnels and sessions.
Status: current Access: read-only
OBJECT-GROUP    

stnPptpDomainGroup 1.3.6.1.4.1.3551.4.1.10.2.1.4
A collection of objects providing configuration, status and statistics of PPTP tunnel domains.
Status: current Access: read-only
OBJECT-GROUP    

stnPptpMappingGroup 1.3.6.1.4.1.3551.4.1.10.2.1.5
A collection of objects providing index mapping.
Status: current Access: read-only
OBJECT-GROUP