SONUS-NODE-RESOURCES-MIB

File: SONUS-NODE-RESOURCES-MIB.mib (122525 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SONUS-COMMON-MIB
SONUS-SMI SONUS-TC

Imported symbols

Integer32 IpAddress MODULE-IDENTITY
NOTIFICATION-TYPE OBJECT-TYPE DisplayString
RowStatus sonusEventClass sonusEventDescription
sonusEventLevel sonusResourcesMIBs SonusAdminState
SonusName SonusNameReference

Defined Types

SonusServProfileEntry  
SEQUENCE    
  sonusServProfileIndex Integer32
  sonusServProfileState INTEGER
  sonusServProfileName SonusName
  sonusServProfileType INTEGER
  sonusServProfileVCktEncoding INTEGER
  sonusServProfileVCktBandwidth Integer32
  sonusServProfileVCktNecEnable INTEGER
  sonusServProfileVPktEncoding INTEGER
  sonusServProfileVPktFrameSize Integer32
  sonusServProfileVPktFramesPerPacket Integer32
  sonusServProfileVPktMaxNetworkJitter Integer32
  sonusServProfileVPktTosValue Integer32
  sonusServProfileCttTestType INTEGER
  sonusServProfileCttTimeout Integer32
  sonusServProfileCttMinDetectTime Integer32
  sonusServProfileCttMinReleaseTime Integer32
  sonusServProfileCapability INTEGER
  sonusServProfileDPktRestrictedCfg INTEGER
  sonusServProfileDPktRtpPayloadType Integer32
  sonusServProfileDPktMaxNetworkJitter Integer32
  sonusServProfileRowStatus RowStatus

SonusSonicBusStatEntry  
SEQUENCE    
  sonusSonicBusStatShelfIndex Integer32
  sonusSonicBusStatNumCalls Integer32
  sonusSonicBusStatBwAllocated Integer32
  sonusSonicBusStatSduCount Integer32

SonusActiveCallEntry  
SEQUENCE    
  sonusActiveCallShelfIndex Integer32
  sonusActiveCallSlotIndex Integer32
  sonusActiveCallIndex Integer32
  sonusActiveCallId Integer32
  sonusActiveCallSonicBusUnitsAllocated Integer32
  sonusActiveCallNumResources Integer32
  sonusActiveCallState DisplayString
  sonusActiveCallIngressServProfile DisplayString
  sonusActiveCallEgressServProfile DisplayString
  sonusActiveCallCallingNum DisplayString
  sonusActiveCallCalledNum DisplayString
  sonusActiveCallAddressTransPerformed INTEGER
  sonusActiveCallOrigCalledNum DisplayString
  sonusActiveCallScenarioType DisplayString
  sonusActiveCallIngressPstnSlotNum Integer32
  sonusActiveCallIngressPstnPortNum Integer32
  sonusActiveCallIngressPstnChannelNum Integer32
  sonusActiveCallIngressPstnChannelCount Integer32
  sonusActiveCallIngressPstnChannelBitMap Integer32
  sonusActiveCallEgressPstnSlotNum Integer32
  sonusActiveCallEgressPstnPortNum Integer32
  sonusActiveCallEgressPstnChannelNum Integer32
  sonusActiveCallEgressPstnChannelCount Integer32
  sonusActiveCallEgressPstnChannelBitMap Integer32
  sonusActiveCallIngressLocalIpSockAddr IpAddress
  sonusActiveCallIngressRemoteIpSockAddr IpAddress
  sonusActiveCallEgressLocalIpSockAddr IpAddress
  sonusActiveCallEgressRemoteIpSockAddr IpAddress
  sonusActiveCallIngressPstnTrunk DisplayString
  sonusActiveCallEgressPstnTrunk DisplayString
  sonusActiveCallIngressIpDestGwName DisplayString
  sonusActiveCallEgressIpDestGwName DisplayString
  sonusActiveCallDuration Integer32
  sonusActiveCallIngressEpType INTEGER
  sonusActiveCallEgressEpType INTEGER
  sonusActiveCallIngressSgType INTEGER
  sonusActiveCallEgressSgType INTEGER
  sonusActiveCallPacketsSent Integer32
  sonusActiveCallPacketsReceived Integer32
  sonusActiveCallOctetsSent Integer32
  sonusActiveCallOctetsReceived Integer32
  sonusActiveCallPacketsLost Integer32
  sonusActiveCallPacketsDiscarded Integer32
  sonusActiveCallInterarrivalJitter Integer32
  sonusActiveCallPacketLatency Integer32

SonusCallResEntry  
SEQUENCE    
  sonusCallResShelfIndex Integer32
  sonusCallResSlotIndex Integer32
  sonusCallResCallIndex Integer32
  sonusCallResIndex Integer32
  sonusCallResId Integer32
  sonusCallResCallId Integer32
  sonusCallResType INTEGER
  sonusCallResMgrHandle Integer32
  sonusCallResMgrShelfIndex Integer32
  sonusCallResMgrSlotIndex Integer32

SonusCallPegCountsEntry  
SEQUENCE    
  sonusCallPegCountsShelfIndex Integer32
  sonusCallPegCountsSlotIndex Integer32
  sonusCallPegCountsReset INTEGER
  sonusCallPegCountsAttempts Integer32
  sonusCallPegCountsCompletions Integer32
  sonusCallPegCountsActiveCalls Integer32
  sonusCallPegCountsStableCalls Integer32
  sonusCallPegCountsUpdates Integer32
  sonusCallPegCountsActiveCallsNonUser Integer32
  sonusCallPegCountsStableCallsNonUser Integer32

SonusToneProfileEntry  
SEQUENCE    
  sonusToneProfileIndex Integer32
  sonusToneProfileName SonusName
  sonusToneProfileGenerationMethod INTEGER
  sonusToneProfileTone1Freq Integer32
  sonusToneProfileTone1Power Integer32
  sonusToneProfileTone2Freq Integer32
  sonusToneProfileTone2Power Integer32
  sonusToneProfileCarrierFreq Integer32
  sonusToneProfileSignalFreq Integer32
  sonusToneProfileModPower Integer32
  sonusToneProfileModIndex Integer32
  sonusToneProfileMake1 Integer32
  sonusToneProfileBreak1 Integer32
  sonusToneProfileMake2 Integer32
  sonusToneProfileBreak2 Integer32
  sonusToneProfileMake3 Integer32
  sonusToneProfileBreak3 Integer32
  sonusToneProfileRepeat Integer32
  sonusToneProfileRowStatus RowStatus

SonusToneTypeEntry  
SEQUENCE    
  sonusToneTypeIndex Integer32
  sonusToneTypeName SonusName
  sonusToneTypeRowStatus RowStatus

SonusTonePackageEntry  
SEQUENCE    
  sonusTonePackageIndex Integer32
  sonusTonePackageName SonusName
  sonusTonePackageRowStatus RowStatus

SonusTonePkgElemEntry  
SEQUENCE    
  sonusTonePkgElemIndex Integer32
  sonusTonePkgElemTonePackageRef SonusNameReference
  sonusTonePkgElemToneTypeRef SonusNameReference
  sonusTonePkgElemToneProfileRef SonusNameReference
  sonusTonePkgElemRowStatus RowStatus

SonusDigitProfileEntry  
SEQUENCE    
  sonusDigitProfileIndex Integer32
  sonusDigitProfileName SonusName
  sonusDigitProfileType INTEGER
  sonusDigitProfileGenPower Integer32
  sonusDigitProfileGenMake Integer32
  sonusDigitProfileGenBreak Integer32
  sonusDigitProfileDetMinPower Integer32
  sonusDigitProfileDetMinOnDuration Integer32
  sonusDigitProfileDetMinOffDuration Integer32
  sonusDigitProfileDetFreqAcceptRange INTEGER
  sonusDigitProfileDtmfDetTwistCutoff Integer32
  sonusDigitProfileMfr1GenMakeKp Integer32
  sonusDigitProfileRowStatus RowStatus

SonusStaticCallAdmnEntry  
SEQUENCE    
  sonusStaticCallAdmnIndex Integer32
  sonusStaticCallAdmnState INTEGER
  sonusStaticCallAdmnName SonusName
  sonusStaticCallAdmnEndPointAShelf Integer32
  sonusStaticCallAdmnEndPointASlot Integer32
  sonusStaticCallAdmnEndPointAPort Integer32
  sonusStaticCallAdmnEndPointAChannel Integer32
  sonusStaticCallAdmnEndPointAServProfile SonusName
  sonusStaticCallAdmnEndPointBType INTEGER
  sonusStaticCallAdmnEndPointBShelf Integer32
  sonusStaticCallAdmnEndPointBSlot Integer32
  sonusStaticCallAdmnEndPointBPort Integer32
  sonusStaticCallAdmnEndPointBChannel Integer32
  sonusStaticCallAdmnEndPointBLocalRTPPort Integer32
  sonusStaticCallAdmnEndPointBLocalIpAddress IpAddress
  sonusStaticCallAdmnEndPointBRemoteRTPPort Integer32
  sonusStaticCallAdmnEndPointBRemoteIpAddress IpAddress
  sonusStaticCallAdmnEndPointBServProfile SonusName
  sonusStaticCallAdmnCircuitMode INTEGER
  sonusStaticCallAdmnRowStatus RowStatus

SonusStaticCallStatEntry  
SEQUENCE    
  sonusStaticCallStatIndex Integer32
  sonusStaticCallStatCallId Integer32
  sonusStaticCallStatState DisplayString
  sonusStaticCallStatTime DisplayString

SonusCallTraceEntry  
SEQUENCE    
  sonusCallTraceIndex Integer32
  sonusCallTraceState INTEGER
  sonusCallTraceName SonusName
  sonusCallTraceType INTEGER
  sonusCallTraceCalledNumber DisplayString
  sonusCallTraceCallingNumber DisplayString
  sonusCallTraceLevel INTEGER
  sonusCallTraceRowStatus RowStatus

SonusCktServProfileEntry  
SEQUENCE    
  sonusCktServProfileIndex Integer32
  sonusCktServProfileState INTEGER
  sonusCktServProfileName SonusName
  sonusCktServProfileAudioEncoding INTEGER
  sonusCktServProfileBandwidth Integer32
  sonusCktServProfileNecEnable INTEGER
  sonusCktServProfileCttTestType INTEGER
  sonusCktServProfileCttTimeout Integer32
  sonusCktServProfileCttMinDetectTime Integer32
  sonusCktServProfileCttMinReleaseTime Integer32
  sonusCktServProfileCapability INTEGER
  sonusCktServProfileDataRestrictedCfg INTEGER
  sonusCktServProfileDtmfProfileName SonusNameReference
  sonusCktServProfileRowStatus RowStatus
  sonusCktServProfileInterworkingXfrCap INTEGER

SonusPktServProfileEntry  
SEQUENCE    
  sonusPktServProfileIndex Integer32
  sonusPktServProfileState INTEGER
  sonusPktServProfileName SonusName
  sonusPktServProfileDestProtocol INTEGER
  sonusPktServProfilePrfdAudioEncoding INTEGER
  sonusPktServProfilePrfdFramesPerPacket Integer32
  sonusPktServProfileDefFramesPerPacket Integer32
  sonusPktServProfileDefAudioEnable INTEGER
  sonusPktServProfileSilenceFactor Integer32
  sonusPktServProfileVInitPlayoutBufDelay Integer32
  sonusPktServProfileFaxRelay INTEGER
  sonusPktServProfileDtmfRelay INTEGER
  sonusPktServProfileFallbackHandling INTEGER
  sonusPktServProfileTosValue Integer32
  sonusPktServProfileDInitPlayoutBufDelay Integer32
  sonusPktServProfileDataRtpPayloadType Integer32
  sonusPktServProfileRowStatus RowStatus
  sonusPktServProfileG711SendSidPackets INTEGER
  sonusPktServProfileG711SidRtpPayloadType Integer32
  sonusPktServProfileSidHeartbeat INTEGER
  sonusPktServProfileRtcp INTEGER
  sonusPktServProfilePacketLossThreshold Integer32
  sonusPktServProfilePacketLossAction INTEGER
  sonusPktServProfileRtpPeerAbsenceAction INTEGER
  sonusPktServProfileDtmfRelayOutOfBand INTEGER
  sonusPktServProfileDtmfRelayRemoveDigits INTEGER

SonusDiscTreatProfileEntry  
SEQUENCE    
  sonusDiscTreatProfileIndex Integer32
  sonusDiscTreatProfileName SonusName
  sonusDiscTreatProfileRowStatus RowStatus

SonusDiscTreatmentAdmnEntry  
SEQUENCE    
  sonusDiscTreatmentProfileIndex Integer32
  sonusDiscTreatmentIndex Integer32
  sonusDiscTreatmentReason Integer32
  sonusDiscTreatmentSigSeqProfileName SonusNameReference
  sonusDiscTreatmentRowStatus RowStatus

SonusDiscSspAdmnEntry  
SEQUENCE    
  sonusDiscSigSeqProfileIndex Integer32
  sonusDiscSigSeqProfileName SonusName
  sonusDiscSigSeqProfileRowStatus RowStatus

SonusDiscSigSeqAdmnEntry  
SEQUENCE    
  sonusDiscSigSequenceProfileIndex Integer32
  sonusDiscSigSequenceIndex Integer32
  sonusDiscSigSequencePosition Integer32
  sonusDiscSigSequenceToken INTEGER
  sonusDiscSigSequenceParam1 DisplayString
  sonusDiscSigSequenceParam2 DisplayString
  sonusDiscSigSequenceAdminState SonusAdminState
  sonusDiscSigSequenceRowStatus RowStatus

SonusTestCallAdmnEntry  
SEQUENCE    
  sonusTestCallAdmnIndex Integer32
  sonusTestCallAdmnState INTEGER
  sonusTestCallAdmnName SonusName
  sonusTestCallAdmnEndPointShelf Integer32
  sonusTestCallAdmnEndPointSlot Integer32
  sonusTestCallAdmnEndPointPort Integer32
  sonusTestCallAdmnEndPointChannel Integer32
  sonusTestCallAdmnRowStatus RowStatus
  sonusTestCallAdmnType INTEGER
  sonusTestCallAdmnPower Integer32
  sonusTestCallAdmnFrequency Integer32
  sonusTestCallAdmnStatPower Integer32
  sonusTestCallAdmnStatPowerTenths Integer32

SonusTestCallStatEntry  
SEQUENCE    
  sonusTestCallStatIndex Integer32
  sonusTestCallStatCallId Integer32
  sonusTestCallStatState DisplayString
  sonusTestCallStatTime DisplayString

Defined Values

sonusNodeResourcesMIB 1.3.6.1.4.1.2879.2.2.2
The MIB Module for Node Resources Management.
MODULE-IDENTITY    

sonusNodeResourcesMIBObjects 1.3.6.1.4.1.2879.2.2.2.1
OBJECT IDENTIFIER    

sonusServProfile 1.3.6.1.4.1.2879.2.2.2.1.1
OBJECT IDENTIFIER    

sonusServProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.1.1
This field is deprecated. The next valid index to use when creating an entry in the sonusServProfileTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

sonusServProfileTable 1.3.6.1.4.1.2879.2.2.2.1.1.2
This field is deprecated. This table specifies the service profile list for the node.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusServProfileEntry

sonusServProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.1.2.1
This field is deprecated.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SonusServProfileEntry  

sonusServProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.1
This field is deprecated. Identifies the target service profile entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

sonusServProfileState 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.2
This field is deprecated. The administrative state of this service profile entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusServProfileName 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.3
This field is deprecated. The user name of this service profile.
Status: deprecated Access: read-write
OBJECT-TYPE    
  SonusName  

sonusServProfileType 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.4
This field is deprecated. The type of endpoint (circuit or packet) supported by this service profile. Circuit endpoints support all the VCkt and VPkt profile parameters for echo cancellation and packetization. Packet endpoints support only the VPkt parameters for packetization.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER circuit(1), packet(2)  

sonusServProfileVCktEncoding 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.5
This field is deprecated. The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER g711ulaw(1), g711alaw(2), none(5)  

sonusServProfileVCktBandwidth 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.6
This field is deprecated. The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 1..24  

sonusServProfileVCktNecEnable 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.7
This field is deprecated. Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the Voice Packet Assembler/Disassember (VPAD) operates in a circuit emulation mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusServProfileVPktEncoding 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.8
This field is deprecated. The audio encoding method to be performed on the packet data received from, and destined to the IP network. The default encoding method is G.711 Ulaw.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER g711ulaw(1), g711alaw(2), g7231(3), g729a(4), none(5)  

sonusServProfileVPktFrameSize 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.9
This field is deprecated. Specifies the number of samples per frame. For G.711 encoding mode, value must be a multiple of 8 samples. For G.723 encoding mode, value must be a multiple of 240 samples. For G.729A, value must be a multiple of 80 samples. Note that 8 samples represent one millisecond of voice data. A value of 0 specifies a frame size equal to the minimum for the encoding method (e.g 8 samples for G.711)
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

sonusServProfileVPktFramesPerPacket 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.10
This field is deprecated. Specifies the number of frames to transmit per packet. For G.711 encoding mode, valid values range from 5 to 40 frames, in increments of 5 frames. The default value for G.711 is 10 frames per packet. For G.723 encoding mode, valid values are 1 or 2, with a default value of 1 frame per packet. A value of 0 specifies the number of frames per packet equal to the default value for the encoding mode (e.g. 10 frames per packet for G.711).
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

sonusServProfileVPktMaxNetworkJitter 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.11
This field is deprecated. Specifies the maximum expected network jitter across the IP network in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 80 (10msec).
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 40..400  

sonusServProfileVPktTosValue 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.12
This field is deprecated. Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sonusServProfileCttTestType 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.13
This field is deprecated. For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER remoteLoopback(1), remote2Wire(2), remote4Wire(3)  

sonusServProfileCttTimeout 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.14
This field is deprecated. For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

sonusServProfileCttMinDetectTime 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.15
This field is deprecated. For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

sonusServProfileCttMinReleaseTime 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.16
This field is deprecated. For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 10..40  

sonusServProfileCapability 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.17
This field is deprecated. Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER voiceOnly(1), circuitModeData(2), voiceOrCircuitModeData(3)  

sonusServProfileDPktRestrictedCfg 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.18
This field is deprecated. Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(1), restricted(2)  

sonusServProfileDPktRtpPayloadType 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.19
This field is deprecated. Specifies the RTP payload type to be included in the RTP header of the voice data packet
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 0..127  

sonusServProfileDPktMaxNetworkJitter 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.20
This field is deprecated. Specifies the maximum expected network jitter across the network for data calls in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. A separate value for data calls is provided to allow a single service profile to specify the jitter buffer size for both voice calls and data calls. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 400 (50msec).
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 40..400  

sonusServProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.21
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusSonicBusStatTable 1.3.6.1.4.1.2879.2.2.2.1.2
This table presents Sonic Bus statistics for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusSonicBusStatEntry

sonusSonicBusStatEntry 1.3.6.1.4.1.2879.2.2.2.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusSonicBusStatEntry  

sonusSonicBusStatShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.2.1.1
Identifies the target shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sonusSonicBusStatNumCalls 1.3.6.1.4.1.2879.2.2.2.1.2.1.2
Indicates the number of active calls on the shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusSonicBusStatBwAllocated 1.3.6.1.4.1.2879.2.2.2.1.2.1.3
Indicates the percentage of Sonic Bus bandwidth allocated to the active calls on the shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusSonicBusStatSduCount 1.3.6.1.4.1.2879.2.2.2.1.2.1.4
Indicates the number of Sonic Bus data units allocated to the active calls on the shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallTable 1.3.6.1.4.1.2879.2.2.2.1.3
This table presents the active call data for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusActiveCallEntry

sonusActiveCallEntry 1.3.6.1.4.1.2879.2.2.2.1.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusActiveCallEntry  

sonusActiveCallShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.3.1.1
Identifies the target shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sonusActiveCallSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.3.1.2
Identifies the target slot.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sonusActiveCallIndex 1.3.6.1.4.1.2879.2.2.2.1.3.1.3
Identifies the target call index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallId 1.3.6.1.4.1.2879.2.2.2.1.3.1.4
Represents the global call identifier (GCID) for the call. GCID is unique across the entire node.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallSonicBusUnitsAllocated 1.3.6.1.4.1.2879.2.2.2.1.3.1.5
Represents the SonicBus bandwidth allocated for the call expressed as SonicData Units per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallNumResources 1.3.6.1.4.1.2879.2.2.2.1.3.1.6
Represents the number of resources currently allocated to the call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallState 1.3.6.1.4.1.2879.2.2.2.1.3.1.7
Represents the current call state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallIngressServProfile 1.3.6.1.4.1.2879.2.2.2.1.3.1.8
The name of the ingress service profile associated with this call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallEgressServProfile 1.3.6.1.4.1.2879.2.2.2.1.3.1.9
The name of the egress service profile associated with this call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallCallingNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.10
The E.164 number representing the Calling Party's telephone number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

sonusActiveCallCalledNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.11
The E.164 number representing the Called Party's telephone number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

sonusActiveCallAddressTransPerformed 1.3.6.1.4.1.2879.2.2.2.1.3.1.12
Indicates whether any address translation has been performed on the called party number. Valid translations are Local Number Portability (LPN), and 800 number translation (Tollfree).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), lnp(2), tollfree(3)  

sonusActiveCallOrigCalledNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.13
If an address translation has been performed on the called party number, this entry contains the original, untranslated number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

sonusActiveCallScenarioType 1.3.6.1.4.1.2879.2.2.2.1.3.1.14
Specifies the call scenario type for this call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallIngressPstnSlotNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.15
For calls originating from the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sonusActiveCallIngressPstnPortNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.16
For calls originating from the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..28  

sonusActiveCallIngressPstnChannelNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.17
For calls originating from the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..24  

sonusActiveCallIngressPstnChannelCount 1.3.6.1.4.1.2879.2.2.2.1.3.1.18
For calls originating from the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..24  

sonusActiveCallIngressPstnChannelBitMap 1.3.6.1.4.1.2879.2.2.2.1.3.1.19
For calls originating from the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallEgressPstnSlotNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.20
For calls delivered to the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sonusActiveCallEgressPstnPortNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.21
For calls delivered to the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..28  

sonusActiveCallEgressPstnChannelNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.22
For calls delivered to the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..24  

sonusActiveCallEgressPstnChannelCount 1.3.6.1.4.1.2879.2.2.2.1.3.1.23
For calls delivered to the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..24  

sonusActiveCallEgressPstnChannelBitMap 1.3.6.1.4.1.2879.2.2.2.1.3.1.24
For calls delivered to the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallIngressLocalIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.25
For calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) local socket connection.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sonusActiveCallIngressRemoteIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.26
For calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) remote socket connection.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sonusActiveCallEgressLocalIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.27
For calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) local socket connection.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sonusActiveCallEgressRemoteIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.28
For calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) remote socket connection.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sonusActiveCallIngressPstnTrunk 1.3.6.1.4.1.2879.2.2.2.1.3.1.29
For calls originating from the PSTN (circuit) side, specifies the trunk group name to which the Ingress Pstn Channel belongs.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallEgressPstnTrunk 1.3.6.1.4.1.2879.2.2.2.1.3.1.30
For calls delivered to the PSTN (circuit) side, specifies the trunk group name to which the Egress Pstn Channel belongs.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallIngressIpDestGwName 1.3.6.1.4.1.2879.2.2.2.1.3.1.31
For calls originating from the IP (packet) side, specifies the name of the remote gateway on which the call originated.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallEgressIpDestGwName 1.3.6.1.4.1.2879.2.2.2.1.3.1.32
For calls delivered to the IP (packet) side, specifies the name of the remote gateway to which the call was delivered.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusActiveCallDuration 1.3.6.1.4.1.2879.2.2.2.1.3.1.33
Indicates the duration in seconds for this call following answer.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallIngressEpType 1.3.6.1.4.1.2879.2.2.2.1.3.1.34
Indicates the end point type for the ingress end point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), circuit(1), packet(2)  

sonusActiveCallEgressEpType 1.3.6.1.4.1.2879.2.2.2.1.3.1.35
Indicates the end point type for the egress end point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), circuit(1), packet(2)  

sonusActiveCallIngressSgType 1.3.6.1.4.1.2879.2.2.2.1.3.1.36
Indicates the signaling type for the ingress end point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), isup(1), cas(2), isdn(3), h323(4), gwip(5), internal1(6), internal2(7), mg(8), asg(9), static(10)  

sonusActiveCallEgressSgType 1.3.6.1.4.1.2879.2.2.2.1.3.1.37
Indicates the signaling type for the egress end point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), isup(1), cas(2), isdn(3), h323(4), gwip(5), internal1(6), internal2(7), mg(8), asg(9), static(10)  

sonusActiveCallPacketsSent 1.3.6.1.4.1.2879.2.2.2.1.3.1.38
Indicates the number of RTP packets sent on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallPacketsReceived 1.3.6.1.4.1.2879.2.2.2.1.3.1.39
Indicates the number of RTP packets received on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallOctetsSent 1.3.6.1.4.1.2879.2.2.2.1.3.1.40
Indicates the number of RTP octets sent on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallOctetsReceived 1.3.6.1.4.1.2879.2.2.2.1.3.1.41
Indicates the number of RTP octets received on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallPacketsLost 1.3.6.1.4.1.2879.2.2.2.1.3.1.42
Indicates the number of RTP packets lost on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallPacketsDiscarded 1.3.6.1.4.1.2879.2.2.2.1.3.1.43
Indicates the number of RTP packets discarded by the jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallInterarrivalJitter 1.3.6.1.4.1.2879.2.2.2.1.3.1.44
Indicates the interarrival packet jitter on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusActiveCallPacketLatency 1.3.6.1.4.1.2879.2.2.2.1.3.1.45
Indicates the latency experienced on this call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResTable 1.3.6.1.4.1.2879.2.2.2.1.4
This table presents the call resource data for the node. Each active call contains a set of allocated resources. This table provides a brief description and the information required to access detailed information about each allocated resource.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusCallResEntry

sonusCallResEntry 1.3.6.1.4.1.2879.2.2.2.1.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusCallResEntry  

sonusCallResShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.1
Identifies the target shelf containing the call to be accessed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sonusCallResSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.2
Identifies the target slot containing the call to be accessed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sonusCallResCallIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.3
Identifies the target call to be accessed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.4
Identifies the target resource index to access within the call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResId 1.3.6.1.4.1.2879.2.2.2.1.4.1.5
Represents the internal resource identifier that uniquely represents the resource to the resource manager entity responsible for the resource.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResCallId 1.3.6.1.4.1.2879.2.2.2.1.4.1.6
Represents the global call identifier (GCID) for the call to which this resource is allocated. This information is provided to ensure that the resource is truly allocated to the call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResType 1.3.6.1.4.1.2879.2.2.2.1.4.1.7
Specifies the resource type for this resource.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bresIcm(0), bresSw2Nif(1), bresSw2DspCtrl(2), bresSw2DspLocal(3), bresSw2DspSonic(4), bresDsp2Dsp(5), bresDsp2Sonic(6), bresLe2Sonic(7), bresAtm2Sw(8), bresSw2Atm(9), dresPstn(10), dresService(11), pres(12), xresCntrl(13), xresUser(14), aresAmq2Dsp(15), atmres(16), bresSw2DspApps(17)  

sonusCallResMgrHandle 1.3.6.1.4.1.2879.2.2.2.1.4.1.8
Specifies the internal handle for the resource manager entity responsible for this resource. This element is provided for information only.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResMgrShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.9
Specifies the shelf on which this resource resides.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallResMgrSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.10
Specifies the card slot on which this resource resides.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsTable 1.3.6.1.4.1.2879.2.2.2.1.5
This table presents call peg count statistics for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusCallPegCountsEntry

sonusCallPegCountsEntry 1.3.6.1.4.1.2879.2.2.2.1.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusCallPegCountsEntry  

sonusCallPegCountsShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.5.1.1
Identifies the target shelf to obtain the call counters.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sonusCallPegCountsSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.5.1.2
Identifies the target slot.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sonusCallPegCountsReset 1.3.6.1.4.1.2879.2.2.2.1.5.1.3
Provides a means to reset the active call attempt and completion counters. Any set operation on this object will result in the attempt and completion counters being cleared.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(1), reset(2)  

sonusCallPegCountsAttempts 1.3.6.1.4.1.2879.2.2.2.1.5.1.4
Indicates the number of call attempts on this shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsCompletions 1.3.6.1.4.1.2879.2.2.2.1.5.1.5
Indicates the total number of completed call attempts on this shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsActiveCalls 1.3.6.1.4.1.2879.2.2.2.1.5.1.6
Indicates the current number of active calls in the shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsStableCalls 1.3.6.1.4.1.2879.2.2.2.1.5.1.7
Indicates the current number of stable calls in the shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsUpdates 1.3.6.1.4.1.2879.2.2.2.1.5.1.8
Indicates the number of call updates (modifications) on this shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsActiveCallsNonUser 1.3.6.1.4.1.2879.2.2.2.1.5.1.9
Indicates the current number of active non-call associated signalling channels in the shelf. (ie ISDN D channel)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallPegCountsStableCallsNonUser 1.3.6.1.4.1.2879.2.2.2.1.5.1.10
Indicates the current number of stable non-call associated signalling channels in the shelf. (ie ISDN D channel)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusToneObjects 1.3.6.1.4.1.2879.2.2.2.1.6
OBJECT IDENTIFIER    

sonusToneProfile 1.3.6.1.4.1.2879.2.2.2.1.6.1
OBJECT IDENTIFIER    

sonusToneProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.6.1.1
The next valid index to use when creating an entry in the sonusToneProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusToneProfileTable 1.3.6.1.4.1.2879.2.2.2.1.6.1.2
This table contains tone profiles for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusToneProfileEntry

sonusToneProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusToneProfileEntry  

sonusToneProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.1
Identifies the tone profile entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusToneProfileName 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.2
The user name of this tone profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusToneProfileGenerationMethod 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.3
Determines the generation method for the tone. This value is specified at object creation time and cannot be modified.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER singleTone(1), dualTone(2), modulatedTone(3)  

sonusToneProfileTone1Freq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.4
Specifies Tone 1 Frequency in Hertz. If 0, then silence is generated. Only valid if generation method is singleTone or dualTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3999  

sonusToneProfileTone1Power 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.5
Specifies Tone 1 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is singleTone or dualTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -50..3  

sonusToneProfileTone2Freq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.6
Specifies Tone 2 Frequency in Hertz. If 0, then a single frequency tone is generated. Only valid if generation method is dualTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3999  

sonusToneProfileTone2Power 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.7
Specifies Tone 2 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is dualTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -50..3  

sonusToneProfileCarrierFreq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.8
Specifies the frequency in Hertz of the carrier for the modulated signal. Value must be less than 4000. If set to 0, then silence is generated. Only valid if generation method is modulatedTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3999  

sonusToneProfileSignalFreq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.9
Specifies the frequency in Hertz of the sinusoid modulating the carrier sinusoid. Value must be less than 4000. Only valid if generation method is modulatedTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3999  

sonusToneProfileModPower 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.10
Specifies Carrier Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is modulatedTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -50..3  

sonusToneProfileModIndex 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.11
Specifies the modulation index of the signal. Value must be in the range of 0 to 300 in 1% units. Only valid if generation method is modulatedTone.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

sonusToneProfileMake1 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.12
Duration of the first on cadence in milliseconds. If 0, then the duration of the first on cadence is 0 msec. If -1, then the tone is played continuously.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8000  

sonusToneProfileBreak1 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.13
Duration of the first off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8000  

sonusToneProfileMake2 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.14
Duration of the second on cadence in milliseconds. If 0, then the duration of the second on cadence is 0 msec. If -1, then the tone is played continuously.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8000  

sonusToneProfileBreak2 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.15
Duration of the second off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8000  

sonusToneProfileMake3 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.16
Duration of the thrid on cadence in milliseconds. If 0, then the duration of the third on cadence is 0 msec. If -1, then the tone is played continuously.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8000  

sonusToneProfileBreak3 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.17
Duration of the third off cadence in milliseconds. If 0, then silence is not generated after the third on cadence. If -1, then silence is generated continuously.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8000  

sonusToneProfileRepeat 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.18
Number of cadence cycles to generate. If 0, then the tone pattern is repeated indefinitely.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusToneProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.19
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusToneType 1.3.6.1.4.1.2879.2.2.2.1.6.2
OBJECT IDENTIFIER    

sonusToneTypeNextIndex 1.3.6.1.4.1.2879.2.2.2.1.6.2.1
The next valid index to use when creating an entry in the sonusToneTypeTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusToneTypeTable 1.3.6.1.4.1.2879.2.2.2.1.6.2.2
This table contains tone types for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusToneTypeEntry

sonusToneTypeEntry 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusToneTypeEntry  

sonusToneTypeIndex 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.1
Identifies the tone type entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusToneTypeName 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.2
The user name of this tone type. Possible types include 'dial', 'busy', 'reorder', etc.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusToneTypeRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusTonePackage 1.3.6.1.4.1.2879.2.2.2.1.6.3
OBJECT IDENTIFIER    

sonusTonePackageNextIndex 1.3.6.1.4.1.2879.2.2.2.1.6.3.1
The next valid index to use when creating an entry in the sonusTonePackageTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTonePackageTable 1.3.6.1.4.1.2879.2.2.2.1.6.3.2
This table contains tone packages for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusTonePackageEntry

sonusTonePackageEntry 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusTonePackageEntry  

sonusTonePackageIndex 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.1
Identifies the tone package.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTonePackageName 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.2
The name of this tone package. This name should reflect the country or carrier which will be using this package.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusTonePackageRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusTonePkgElem 1.3.6.1.4.1.2879.2.2.2.1.6.4
OBJECT IDENTIFIER    

sonusTonePkgElemTable 1.3.6.1.4.1.2879.2.2.2.1.6.4.1
This table contains elements which bind tone types to tone profiles for a given tone package.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusTonePkgElemEntry

sonusTonePkgElemEntry 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusTonePkgElemEntry  

sonusTonePkgElemIndex 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.1
Identifies the target tone package element.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTonePkgElemTonePackageRef 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.2
Identifies the tone packge for this element.
Status: current Access: read-write
OBJECT-TYPE    
  SonusNameReference  

sonusTonePkgElemToneTypeRef 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.3
Identifies the tone type for this element.
Status: current Access: read-write
OBJECT-TYPE    
  SonusNameReference  

sonusTonePkgElemToneProfileRef 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.4
The name of the tone profile that this tone type maps to for this tone package.
Status: current Access: read-write
OBJECT-TYPE    
  SonusNameReference  

sonusTonePkgElemRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusDigitProfile 1.3.6.1.4.1.2879.2.2.2.1.7
OBJECT IDENTIFIER    

sonusDigitProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.7.1
The next valid index to use when creating an entry in the sonusDigitProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusDigitProfileTable 1.3.6.1.4.1.2879.2.2.2.1.7.2
This table contains digit profiles for the node. Digit Profiles contain both digit generation (sonusDigitProfileGen...) and digit detection (sonusDigitProfileDet...) parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusDigitProfileEntry

sonusDigitProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.7.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusDigitProfileEntry  

sonusDigitProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.1
Identifies the digit profile entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusDigitProfileName 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.2
The user name of this digit profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusDigitProfileType 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.3
Specifies the digit's format. This value is set at object creation time and cannot be modified.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dtmf(1), mfr1(2), mfr2f(3), mfr2b(4)  

sonusDigitProfileGenPower 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.4
Specifies digit generation power level in dBm. Power level ranges from -50 dBm (minimum power) to +3 dBm (maximum power).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -50..3  

sonusDigitProfileGenMake 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.5
Specifies duration of generated digits in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8000  

sonusDigitProfileGenBreak 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.6
Specifies silence between generated digits in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8000  

sonusDigitProfileDetMinPower 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.7
Specifies minimum power level in dBm required for digit detection. Valid levels range from -45dBm to -25dBm.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -45..-25  

sonusDigitProfileDetMinOnDuration 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.8
Specifies minimum tone duration in milliseconds required for digit detection. The value must in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 25ms and 100ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 25..100  

sonusDigitProfileDetMinOffDuration 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.9
Specifies minimum interdigit duration in milliseconds for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 10ms and 100ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..100  

sonusDigitProfileDetFreqAcceptRange 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10
Specifies frequency tolerances for digit detection. For DTMF digits the value represents accept and reject ranges. For MF digits the value represents only the accept range. Frequencies detected within the accept range will result in digit detection. Frequencies detected outside the reject range will not result in digit detection. . DTMF DTMF MFR1 VALUE ENUMERATION ACCEPT REJECT ACCEPT ----- ----------- ---------------- ------------------ 1 narrow +/-2.0% +/-3.0% +/-(1.5% + 5Hz) 2 medium +/-2.5% +/-3.5% +/-(1.5% + 10Hz) 3 wide +/-3.0% +/-4.0% +/-(1.5% + 15Hz) 4 wider +/-3.5% +/-4.5% N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER narrow(1), medium(2), wide(3), wider(4)  

sonusDigitProfileDtmfDetTwistCutoff 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.11
For DTMF digit detection only. Twist is the ratio of high group power to low. Twist ratios below the twist cutoff will result in digit detection. Twist ratios above the twist cutoff will result in digit rejection. Value must be between 4dB and 12dB in increments of 2dB.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4..12  

sonusDigitProfileMfr1GenMakeKp 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.12
Specifies duration of generated KP digit in milliseconds. Only applicable if digit type is MFR1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8000  

sonusDigitProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.13
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusStaticCall 1.3.6.1.4.1.2879.2.2.2.1.8
OBJECT IDENTIFIER    

sonusStaticCallNextIndex 1.3.6.1.4.1.2879.2.2.2.1.8.1
The next valid index to use when creating an entry in the sonusStaticCallAdmnTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusStaticCallAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.8.2
This table specifies the static call list for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusStaticCallAdmnEntry

sonusStaticCallAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.8.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusStaticCallAdmnEntry  

sonusStaticCallAdmnIndex 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.1
Identifies the target static call entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusStaticCallAdmnState 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.2
The administrative state of this static call entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusStaticCallAdmnName 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.3
The user name of this static call.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusStaticCallAdmnEndPointAShelf 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.4
A 32-bit integer identifying the shelf of the end point A
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..6  

sonusStaticCallAdmnEndPointASlot 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.5
A 32-bit integer identifying the slot of the end point A
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

sonusStaticCallAdmnEndPointAPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.6
Port index of end point A.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sonusStaticCallAdmnEndPointAChannel 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.7
Indicates the DS0 channel of the end point A
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

sonusStaticCallAdmnEndPointAServProfile 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.8
The service profile used for end point A
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusStaticCallAdmnEndPointBType 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.9
The type of end point B (circuit or packet).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER circuit(1), packet(2)  

sonusStaticCallAdmnEndPointBShelf 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.10
A 32-bit integer identifying the shelf of the end point B
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..6  

sonusStaticCallAdmnEndPointBSlot 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.11
A 32-bit integer identifying the slot of the end point B
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

sonusStaticCallAdmnEndPointBPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.12
Port index of end point B.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sonusStaticCallAdmnEndPointBChannel 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.13
Indicates the DS0 channel of the end point B
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

sonusStaticCallAdmnEndPointBLocalRTPPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.14
Indicates the local RTP port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusStaticCallAdmnEndPointBLocalIpAddress 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.15
The IP Address of the end point B if it is packet
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sonusStaticCallAdmnEndPointBRemoteRTPPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.16
Indicates the remote RTP port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusStaticCallAdmnEndPointBRemoteIpAddress 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.17
The IP Address of the end point B if it is packet
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sonusStaticCallAdmnEndPointBServProfile 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.18
The service profile used for end point B
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusStaticCallAdmnCircuitMode 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.19
The circuit mode for this static call
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER voice(1), data(2)  

sonusStaticCallAdmnRowStatus 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.20
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusStaticCallStatTable 1.3.6.1.4.1.2879.2.2.2.1.9
The Manual Call Stat Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusStaticCallStatEntry

sonusStaticCallStatEntry 1.3.6.1.4.1.2879.2.2.2.1.9.1
An entry in the Manual Call Stat Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusStaticCallStatEntry  

sonusStaticCallStatIndex 1.3.6.1.4.1.2879.2.2.2.1.9.1.1
The index for target static call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusStaticCallStatCallId 1.3.6.1.4.1.2879.2.2.2.1.9.1.2
The call identifier(GCID) assigned to this static call
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusStaticCallStatState 1.3.6.1.4.1.2879.2.2.2.1.9.1.3
The status of the static call
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusStaticCallStatTime 1.3.6.1.4.1.2879.2.2.2.1.9.1.4
Displays the Date/time the connection was created
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusStaticCallActionObjects 1.3.6.1.4.1.2879.2.2.2.1.10
OBJECT IDENTIFIER    

sonusStaticCallGcid 1.3.6.1.4.1.2879.2.2.2.1.10.1
The call identifier for a call to be deleted
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusStaticCallAction 1.3.6.1.4.1.2879.2.2.2.1.10.2
The action that should be taken on the call
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), delete(2)  

sonusCallTrace 1.3.6.1.4.1.2879.2.2.2.1.11
OBJECT IDENTIFIER    

sonusCallTraceNextIndex 1.3.6.1.4.1.2879.2.2.2.1.11.1
The next valid index to use when creating an entry in the sonusCallTraceTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallTraceTable 1.3.6.1.4.1.2879.2.2.2.1.11.2
This table specifies the Call Trace Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusCallTraceEntry

sonusCallTraceEntry 1.3.6.1.4.1.2879.2.2.2.1.11.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusCallTraceEntry  

sonusCallTraceIndex 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.1
The index of this Call Trace entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCallTraceState 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.2
The administrative state of this Call Trace entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusCallTraceName 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.3
The name of this Call Trace entry.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusCallTraceType 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.4
The trace type of this Call Trace entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER calledcalling(1), calledonly(2), callingonly(3)  

sonusCallTraceCalledNumber 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.5
The called number being traced.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

sonusCallTraceCallingNumber 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.6
The calling number being traced.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

sonusCallTraceLevel 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.7
The trace level of this call trace entry, currently only one level is supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level1(1), level2(2), level3(3)  

sonusCallTraceRowStatus 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusCktServProfile 1.3.6.1.4.1.2879.2.2.2.1.12
OBJECT IDENTIFIER    

sonusCktServProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.12.1
The next valid index to use when creating an entry in the sonusCktServProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCktServProfileTable 1.3.6.1.4.1.2879.2.2.2.1.12.2
This table specifies the Circuit service profile list for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusCktServProfileEntry

sonusCktServProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.12.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusCktServProfileEntry  

sonusCktServProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.1
Identifies the target circuit service profile entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusCktServProfileState 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.2
The administrative state of this circuit service profile entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusCktServProfileName 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.3
The name of this circuit service profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusCktServProfileAudioEncoding 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.4
The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER g711ulaw(1), g711alaw(2)  

sonusCktServProfileBandwidth 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.5
The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..24  

sonusCktServProfileNecEnable 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.6
Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the echo chaceller is bypassed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusCktServProfileCttTestType 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7
For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER remoteLoopback(1), remote2Wire(2), remote4Wire(3)  

sonusCktServProfileCttTimeout 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.8
For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sonusCktServProfileCttMinDetectTime 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.9
For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

sonusCktServProfileCttMinReleaseTime 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.10
For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..40  

sonusCktServProfileCapability 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.11
Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER voiceOnly(1), circuitModeData(2), voiceOrCircuitModeData(3)  

sonusCktServProfileDataRestrictedCfg 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.12
Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(1), restricted(2)  

sonusCktServProfileDtmfProfileName 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.13
The name of DTMF profile associated with this circuit service profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusNameReference  

sonusCktServProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.14
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusCktServProfileInterworkingXfrCap 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.15
The transfer capability for audio calls when interworking with CAS. The default transfer capability is speech.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speech(1), audio31Khz(2)  

sonusPktServProfile 1.3.6.1.4.1.2879.2.2.2.1.13
OBJECT IDENTIFIER    

sonusPktServProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.13.1
The next valid index to use when creating an entry in the sonusPktServProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusPktServProfileTable 1.3.6.1.4.1.2879.2.2.2.1.13.2
This table specifies the packet service profile list for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusPktServProfileEntry

sonusPktServProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.13.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusPktServProfileEntry  

sonusPktServProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.1
Identifies the target packet service profile entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusPktServProfileState 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.2
The administrative state of this packet service profile entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusPktServProfileName 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.3
The user name of this packet service profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusPktServProfileDestProtocol 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.4
Specifies the Packet Destination Protocal used. GSX - uses Sonus GSX-GSX MCS protocol. h323 - uses H.323 protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gsx(1), h323(2)  

sonusPktServProfilePrfdAudioEncoding 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.5
The preferred audio encoding method to be performed on the packet data received from, and destined to the IP network. The possible options are: G.711, G.711 with Silence Suppression, G.729A and G.729A+B. The default encoding method is G.711. For G.711, the law is determined by Circuit Service Profile.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER g711(1), g711ss(2), g729a(4), g729ab(5)  

sonusPktServProfilePrfdFramesPerPacket 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.6
Specifies the Preferred Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusPktServProfileDefFramesPerPacket 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.7
Specifies the default Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusPktServProfileDefAudioEnable 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.8
Specifies whether or not to allow default Audio (G.711). If enabled, allow use of G.711 if preferred audio resource is not available. If disabled, Do not use of G.711 if preferred audio resource is not available and the call is disconnected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusPktServProfileSilenceFactor 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.9
Specifies percentage of call time that silence is expected.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..50  

sonusPktServProfileVInitPlayoutBufDelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.10
This value defines the size of the initial playout bufferrequired to absorb the maximum expected voice packet delay across the network. Range from 1 ms to 50 ms, in increments of 1 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusPktServProfileFaxRelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.11
If never is specified, Fax Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, Fax Relay is used if the compressed resource is available. If always is specified, Fax Relay is used regardless of the audio encoding method.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER never(0), useIfCompressedAudio(1), always(2)  

sonusPktServProfileDtmfRelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.12
If never is specified, DTMF Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, DTMF Relay is used if the compressed resource is available. If always is specified, DTMF Relay is used regardless of the audio encoding method.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER never(0), useIfCompressedAudio(1), always(2)  

sonusPktServProfileFallbackHandling 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.13
This specifies the behavior when a compressed codec call needs to revert to G.711 (e.g., to pass modem data) and there is no bandwidth available.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disconnet(1), continue(2)  

sonusPktServProfileTosValue 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.14
Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sonusPktServProfileDInitPlayoutBufDelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.15
This value defines the size of the initial playout buffer required to absorb the maximum expected data packet delay across the network. Range from 5 ms to 50 ms, in increments of 1 ms. The default value is 50 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusPktServProfileDataRtpPayloadType 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.16
Specifies the RTP payload type to be included in the RTP header of the data packet
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..127  

sonusPktServProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.17
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusPktServProfileG711SendSidPackets 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.18
Specifies whether sending SID packets is enabled. This applies only if preferred audio encoding is G.711 with silence suppression.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusPktServProfileG711SidRtpPayloadType 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.19
Specifies G.711 SID RTP payload type. This applies only if preferred audio encoding is G.711 with silence suppression. Range 0 to 127.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..127  

sonusPktServProfileSidHeartbeat 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.20
Specifies whether sending SID heartbeat packets is enabled. This applies if preferred audio encoding is either G.711 with silence suppression or G.729A+B.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusPktServProfileRtcp 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.21
Specifies whether RTCP is enabled for the call.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusPktServProfilePacketLossThreshold 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.22
Specifies the RTCP packet loss threshold in packets/100,000. 0 means no detection. Requires RTCP to be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusPktServProfilePacketLossAction 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.23
Specifies the action taken when the packet loss threshold is exceeded. Requires RTCP to be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), trap(1), trapAndDisconnect(3)  

sonusPktServProfileRtpPeerAbsenceAction 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.24
Specifies the action taken when the RTP peer is detected to be absent (due to lack of RTP and RTCP packets). Requires RTCP to be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), trap(1), trapAndDisconnect(3)  

sonusPktServProfileDtmfRelayOutOfBand 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.25
Specifies whether out of band DTMF relay is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusPktServProfileDtmfRelayRemoveDigits 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.26
Specifies whether removing DTMF digits from the media stream is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sonusDisconnectTreatmentObjects 1.3.6.1.4.1.2879.2.2.2.1.14
OBJECT IDENTIFIER    

sonusDiscTreatProfile 1.3.6.1.4.1.2879.2.2.2.1.14.1
OBJECT IDENTIFIER    

sonusDiscTreatProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.14.1.1
The next valid index to use when creating an entry in the sonusDiscTreatProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusDiscTreatProfileTable 1.3.6.1.4.1.2879.2.2.2.1.14.1.2
This table contains Disconnect Treatment Profiles for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusDiscTreatProfileEntry

sonusDiscTreatProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusDiscTreatProfileEntry  

sonusDiscTreatProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.1
Identifies the Disconnect Treatment Profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

sonusDiscTreatProfileName 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.2
The user name of this Disconnect Treatment Profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusDiscTreatProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusDiscTreatmentAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.14.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusDiscTreatmentAdmnEntry

sonusDiscTreatmentAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.14.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusDiscTreatmentAdmnEntry  

sonusDiscTreatmentProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.1
Identifies the Disconnect Treatment Profile to which this entry belongs.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

sonusDiscTreatmentIndex 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.2
Identifies the target Disconnect Treatment entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

sonusDiscTreatmentReason 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.3
Disconnect Reason Code.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sonusDiscTreatmentSigSeqProfileName 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.4
For given Disconnect Treatment Profile and Disconnect Reason Code, execute this Disconnect SSP.
Status: current Access: read-write
OBJECT-TYPE    
  SonusNameReference  

sonusDiscTreatmentRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusDiscSspGroupAdmn 1.3.6.1.4.1.2879.2.2.2.1.14.3
OBJECT IDENTIFIER    

sonusDiscSspNextIndex 1.3.6.1.4.1.2879.2.2.2.1.14.3.1
The next valid index to use when creating a new sonusDiscSspGroupAdmnEntry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusDiscSspAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.14.3.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusDiscSspAdmnEntry

sonusDiscSspAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusDiscSspAdmnEntry  

sonusDiscSigSeqProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.1
Identifies the target Disconnect Signal Sequence Profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

sonusDiscSigSeqProfileName 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.2
The user name of this Disconnect Signal Sequence Profile.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusDiscSigSeqProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusDiscSigSeqAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.14.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusDiscSigSeqAdmnEntry

sonusDiscSigSeqAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.14.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusDiscSigSeqAdmnEntry  

sonusDiscSigSequenceProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

sonusDiscSigSequenceIndex 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

sonusDiscSigSequencePosition 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..31  

sonusDiscSigSequenceToken 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER playTone(7), playAnn(8), delay(9), clear(16), exec(17)  

sonusDiscSigSequenceParam1 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

sonusDiscSigSequenceParam2 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

sonusDiscSigSequenceAdminState 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  SonusAdminState  

sonusDiscSigSequenceRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusTestCall 1.3.6.1.4.1.2879.2.2.2.1.15
OBJECT IDENTIFIER    

sonusTestCallNextIndex 1.3.6.1.4.1.2879.2.2.2.1.15.1
The next valid index to use when creating an entry in the sonusTestCallAdmnTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTestCallAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.15.2
This table specifies the test call list for the node.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusTestCallAdmnEntry

sonusTestCallAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.15.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusTestCallAdmnEntry  

sonusTestCallAdmnIndex 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.1
Identifies the target test call entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTestCallAdmnState 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.2
The administrative state of this test call entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sonusTestCallAdmnName 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.3
The user name of this test call.
Status: current Access: read-write
OBJECT-TYPE    
  SonusName  

sonusTestCallAdmnEndPointShelf 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.4
A 32-bit integer identifying the shelf of the end point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..6  

sonusTestCallAdmnEndPointSlot 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.5
A 32-bit integer identifying the slot of the end point
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

sonusTestCallAdmnEndPointPort 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.6
Port index of end point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sonusTestCallAdmnEndPointChannel 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.7
Indicates the DS0 channel of the end point.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

sonusTestCallAdmnRowStatus 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sonusTestCallAdmnType 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.9
The circuit type for this test call.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER listen(0), play(1)  

sonusTestCallAdmnPower 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.10
The power in dBm of the tone to play.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -50..3  

sonusTestCallAdmnFrequency 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.11
The frequency in Hz of the tone to play or listen for.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3999  

sonusTestCallAdmnStatPower 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.12
The dBm of the tone received in LISTEN mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1000..3  

sonusTestCallAdmnStatPowerTenths 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.13
The tenths of dBm of the tone received in LISTEN mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..9  

sonusTestCallStatTable 1.3.6.1.4.1.2879.2.2.2.1.16
The Manual Call Stat Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonusTestCallStatEntry

sonusTestCallStatEntry 1.3.6.1.4.1.2879.2.2.2.1.16.1
An entry in the Manual Call Stat Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SonusTestCallStatEntry  

sonusTestCallStatIndex 1.3.6.1.4.1.2879.2.2.2.1.16.1.1
The index for target test call.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTestCallStatCallId 1.3.6.1.4.1.2879.2.2.2.1.16.1.2
The call identifier(GCID) assigned to this test call
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusTestCallStatState 1.3.6.1.4.1.2879.2.2.2.1.16.1.3
The status of the test call
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusTestCallStatTime 1.3.6.1.4.1.2879.2.2.2.1.16.1.4
Displays the Date/time the connection was created
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

sonusTestCallActionObjects 1.3.6.1.4.1.2879.2.2.2.1.17
OBJECT IDENTIFIER    

sonusTestCallGcid 1.3.6.1.4.1.2879.2.2.2.1.17.1
The call identifier for a call to be deleted
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sonusTestCallAction 1.3.6.1.4.1.2879.2.2.2.1.17.2
The action that should be taken on the call
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), delete(2)  

sonusNodeResourcesMIBNotifications 1.3.6.1.4.1.2879.2.2.2.2
OBJECT IDENTIFIER    

sonusNodeResourcesMIBNotificationsPrefix 1.3.6.1.4.1.2879.2.2.2.2.0
OBJECT IDENTIFIER    

sonusNodeResourcesMIBNotificationsObjects 1.3.6.1.4.1.2879.2.2.2.2.1
OBJECT IDENTIFIER    

sonusCallAdmissionChangeReason 1.3.6.1.4.1.2879.2.2.2.2.1.1
The reason why the call admission control state has changes.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..101)  

sonusNodeResourcesCallAdmissionSuspendedNotification 1.3.6.1.4.1.2879.2.2.2.2.0.1
This trap indicates that call admission into the GSX has been suspended. Information provided by this trap includes the reason why call admission has been suspended.
Status: current Access: read-only
NOTIFICATION-TYPE    

sonusNodeResourcesCallAdmissionEnabledNotification 1.3.6.1.4.1.2879.2.2.2.2.0.2
This trap indicates that call admission into the GSX has been enabled. Information provided by this trap includes the reason why call admission has been enabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

sonusNodeResourcesCallTraceHitNotification 1.3.6.1.4.1.2879.2.2.2.2.0.3
This trap indicates that call trace filter had a hit. Information provided by this trap includes the called number and the calling number.
Status: current Access: read-only
NOTIFICATION-TYPE