SONUS-NODE-MIB

File: SONUS-NODE-MIB.mib (127351 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SONUS-COMMON-MIB
SONUS-SMI	SONUS-TC

Imported symbols

Integer32	IpAddress	MODULE-IDENTITY
NOTIFICATION-TYPE	OBJECT-TYPE	DateAndTime
DisplayString	RowStatus	sonusEventClass
sonusEventDescription	sonusEventLevel	sonusPortIndex
sonusShelfIndex	sonusSlotIndex	sonusSystemMIBs
AdapterTypeID	HwTypeID	ServerFunctionType
ServerTypeID	SonusAccessLevel	SonusAdminAction
SonusAdminState	SonusName	SonusServiceState
SonusSoftwareVersion

Defined Types

SonusNodeShelfAdmnEntry
SEQUENCE
	sonusNodeShelfAdmnIndex	Integer32
	sonusNodeShelfAdmnState	SonusAdminState
	sonusNodeShelfAdmnIpaddr1	IpAddress
	sonusNodeShelfAdmnIpaddr2	IpAddress
	sonusNodeShelfAdmn48VdcAState	SonusAdminState
	sonusNodeShelfAdmn48VdcBState	SonusAdminState
	sonusNodeShelfAdmnStatus	INTEGER
	sonusNodeShelfAdmnRestart	INTEGER
	sonusNodeShelfAdmnRowStatus	RowStatus

SonusNodeShelfStatEntry
SEQUENCE
	sonusNodeShelfStatIndex	Integer32
	sonusNodeShelfStatSlots	Integer32
	sonusNodeShelfStatSerialNumber	DisplayString
	sonusNodeShelfStatType	INTEGER
	sonusNodeShelfStatFan	INTEGER
	sonusNodeShelfStat48VAStatus	INTEGER
	sonusNodeShelfStat48VBStatus	INTEGER
	sonusNodeShelfStatBackplane	HwTypeID
	sonusNodeShelfStatBootCount	Integer32
	sonusNodeShelfStatTemperature	Integer32
	sonusNodeShelfStatFanSpeed	INTEGER

SonusNodeSrvrAdmnEntry
SEQUENCE
	sonusNodeSrvrAdmnShelfIndex	Integer32
	sonusNodeSrvrAdmnSlotIndex	Integer32
	sonusNodeSrvrAdmnHwType	ServerTypeID
	sonusNodeSrvrAdmnState	SonusAdminState
	sonusNodeSrvrAdmnMode	SonusServiceState
	sonusNodeSrvrAdmnAction	SonusAdminAction
	sonusNodeSrvrAdmnDryupLimit	Integer32
	sonusNodeSrvrAdmnDumpState	SonusAdminState
	sonusNodeSrvrAdmnRowStatus	RowStatus
	sonusNodeSrvrAdmnRedundancyRole	INTEGER
	sonusNodeSrvrAdmnAdapHwType	AdapterTypeID
	sonusNodeSrvrAdmnSpecialFunction	ServerFunctionType

SonusNodeSlotEntry
SEQUENCE
	sonusNodeSlotShelfIndex	Integer32
	sonusNodeSlotIndex	Integer32
	sonusNodeSlotState	INTEGER
	sonusNodeSlotHwType	HwTypeID
	sonusNodeSlotHwTypeRev	Integer32
	sonusNodeSlotPower	INTEGER
	sonusNodeSlotAdapState	INTEGER
	sonusNodeSlotAdapHwType	HwTypeID

SonusNodeSrvrStatEntry
SEQUENCE
	sonusNodeSrvrStatShelfIndex	Integer32
	sonusNodeSrvrStatSlotIndex	Integer32
	sonusNodeSrvrStatMiddVersion	Integer32
	sonusNodeSrvrStatHwType	HwTypeID
	sonusNodeSrvrStatSerialNum	DisplayString
	sonusNodeSrvrStatPartNum	DisplayString
	sonusNodeSrvrStatPartNumRev	DisplayString
	sonusNodeSrvrStatMfgDate	DisplayString
	sonusNodeSrvrStatFlashVersion	DisplayString
	sonusNodeSrvrStatSwVersion	DisplayString
	sonusNodeSrvrStatBuildNum	Integer32
	sonusNodeSrvrStatMode	INTEGER
	sonusNodeSrvrStatTemperature	Integer32
	sonusNodeSrvrStatMemUtilization	Integer32
	sonusNodeSrvrStatCpuUtilization	Integer32
	sonusNodeSrvrStatHwTypeRev	Integer32
	sonusNodeSrvrStatSwVersionCode	SonusSoftwareVersion
	sonusNodeSrvrStatEpldRev	Integer32
	sonusNodeSrvrStatHostName	DisplayString
	sonusNodeSrvrStatUserName	DisplayString
	sonusNodeSrvrStatViewName	DisplayString
	sonusNodeSrvrStatTotalMem	Integer32
	sonusNodeSrvrStatFreeMem	Integer32
	sonusNodeSrvrStatTotalSharedMem	Integer32
	sonusNodeSrvrStatFreeSharedMem	Integer32

SonusNodeAdapStatEntry
SEQUENCE
	sonusNodeAdapStatShelfIndex	Integer32
	sonusNodeAdapStatSlotIndex	Integer32
	sonusNodeAdapStatMiddVersion	Integer32
	sonusNodeAdapStatHwType	HwTypeID
	sonusNodeAdapStatHwTypeRev	Integer32
	sonusNodeAdapStatSerialNum	DisplayString
	sonusNodeAdapStatPartNum	DisplayString
	sonusNodeAdapStatPartNumRev	DisplayString
	sonusNodeAdapStatMfgDate	DisplayString

SonusNodeSlotAdmnEntry
SEQUENCE
	sonusNodeSlotAdmnShelfIndex	Integer32
	sonusNodeSlotAdmnSlotIndex	Integer32
	sonusNodeSlotAdmnReset	INTEGER

SonusNvsConfigEntry
SEQUENCE
	sonusBparamShelfIndex	Integer32
	sonusBparamUnused	Integer32
	sonusBparamPasswd	DisplayString
	sonusBparamIpAddrSlot1Port0	IpAddress
	sonusBparamIpMaskSlot1Port0	IpAddress
	sonusBparamIpGatewaySlot1Port0	IpAddress
	sonusBparamIfSpeedTypeSlot1Port0	INTEGER
	sonusBparamIpAddrSlot1Port1	IpAddress
	sonusBparamIpMaskSlot1Port1	IpAddress
	sonusBparamIpGatewaySlot1Port1	IpAddress
	sonusBparamIfSpeedTypeSlot1Port1	INTEGER
	sonusBparamIpAddrSlot1Port2	IpAddress
	sonusBparamIpMaskSlot1Port2	IpAddress
	sonusBparamIpGatewaySlot1Port2	IpAddress
	sonusBparamIfSpeedTypeSlot1Port2	INTEGER
	sonusBparamIpAddrSlot2Port0	IpAddress
	sonusBparamIpMaskSlot2Port0	IpAddress
	sonusBparamIpGatewaySlot2Port0	IpAddress
	sonusBparamIfSpeedTypeSlot2Port0	INTEGER
	sonusBparamIpAddrSlot2Port1	IpAddress
	sonusBparamIpMaskSlot2Port1	IpAddress
	sonusBparamIpGatewaySlot2Port1	IpAddress
	sonusBparamIfSpeedTypeSlot2Port1	INTEGER
	sonusBparamIpAddrSlot2Port2	IpAddress
	sonusBparamIpMaskSlot2Port2	IpAddress
	sonusBparamIpGatewaySlot2Port2	IpAddress
	sonusBparamIfSpeedTypeSlot2Port2	INTEGER
	sonusBparamBootDelay	Integer32
	sonusBparamCoreState	SonusAdminState
	sonusBparamCoreLevel	INTEGER
	sonusBparamBaudRate	Integer32
	sonusBparamNfsPrimary	IpAddress
	sonusBparamNfsSecondary	IpAddress
	sonusBparamNfsMountPri	DisplayString
	sonusBparamNfsMountSec	DisplayString
	sonusBparamNfsPathUpgrade	DisplayString
	sonusBparamNfsPathLoad	DisplayString
	sonusBparamPrimName	DisplayString
	sonusBparamSecName	DisplayString
	sonusBparamMasterState	INTEGER
	sonusBparamParamMode	INTEGER
	sonusBparamCliScript	DisplayString
	sonusBparamUId	Integer32
	sonusBparamGrpId	Integer32
	sonusBparamCoreDumpLimit	Integer32
	sonusBparamNfsPathSoftware	DisplayString

SonusFlashConfigEntry
SEQUENCE
	sonusFlashAdmnShelfIndex	Integer32
	sonusFlashAdmnSlotIndex	Integer32
	sonusFlashAdmnUpdateButton	INTEGER

SonusFlashStatusEntry
SEQUENCE
	sonusFlashStatShelfIndex	Integer32
	sonusFlashStatSlotIndex	Integer32
	sonusFlashStatState	INTEGER
	sonusFlashStatLastStatus	INTEGER

SonusUserListEntry
SEQUENCE
	sonusUserListIndex	Integer32
	sonusUserListState	SonusAdminState
	sonusUserListUserName	SonusName
	sonusUserListProfileName	DisplayString
	sonusUserListPasswd	DisplayString
	sonusUserListComment	DisplayString
	sonusUserListAccess	INTEGER
	sonusUserListRowStatus	RowStatus

SonusUserListStatusEntry
SEQUENCE
	sonusUserListStatusIndex	Integer32
	sonusUserListStatusLastConfigChange	DateAndTime

SonusUserProfileEntry
SEQUENCE
	sonusUserProfileIndex	Integer32
	sonusUserProfileName	SonusName
	sonusUserProfileUserState	SonusAdminState
	sonusUserProfileUserPasswd	DisplayString
	sonusUserProfileUserComment	DisplayString
	sonusUserProfileUserAccess	SonusAccessLevel
	sonusUserProfileUserCommentState	SonusAdminState
	sonusUserProfileUserPasswdState	SonusAdminState
	sonusUserProfileUserAccessState	SonusAdminState
	sonusUserProfileUserStateState	SonusAdminState
	sonusUserProfileRowStatus	RowStatus

SonusSwLoadEntry
SEQUENCE
	sonusSwLoadAdmnIndex	Integer32
	sonusSwLoadAdmnImageName	DisplayString
	sonusSwLoadAdmnHwType	ServerTypeID
	sonusSwLoadAdmnRowStatus	RowStatus

SonusSwLoadSpecEntry
SEQUENCE
	sonusSwLoadSpecAdmnShelfIndex	Integer32
	sonusSwLoadSpecAdmnSlotIndex	Integer32
	sonusSwLoadSpecAdmnImageName	DisplayString
	sonusSwLoadSpecAdmnRowStatus	RowStatus

SonusNfsAdmnEntry
SEQUENCE
	sonusNfsAdmnShelfIndex	Integer32
	sonusNfsAdmnSlotIndex	Integer32
	sonusNfsAdmnMountServer	INTEGER
	sonusNfsAdmnUnmountServer	INTEGER
	sonusNfsAdmnToggleActiveServer	INTEGER
	sonusNfsAdmnSetWritable	INTEGER

SonusNfsStatEntry
SEQUENCE
	sonusNfsStatShelfIndex	Integer32
	sonusNfsStatSlotIndex	Integer32
	sonusNfsStatPrimaryStatus	INTEGER
	sonusNfsStatSecondaryStatus	INTEGER
	sonusNfsStatActiveServer	INTEGER
	sonusNfsStatStandbyServer	INTEGER
	sonusNfsStatPrimaryIP	IpAddress
	sonusNfsStatSecondaryIP	IpAddress
	sonusNfsStatPrimaryMount	DisplayString
	sonusNfsStatSecondaryMount	DisplayString
	sonusNfsStatPrimaryLastError	INTEGER
	sonusNfsStatSecondaryLastError	INTEGER

Defined Values

sonusNodeMIB		1.3.6.1.4.1.2879.2.1.1
The MIB Module for Node Management.
MODULE-IDENTITY

sonusNodeMIBObjects		1.3.6.1.4.1.2879.2.1.1.1
OBJECT IDENTIFIER

sonusNode		1.3.6.1.4.1.2879.2.1.1.1.1
OBJECT IDENTIFIER

sonusNodeAdmnObjects		1.3.6.1.4.1.2879.2.1.1.1.1.1
OBJECT IDENTIFIER

sonusNodeAdmnShelves		1.3.6.1.4.1.2879.2.1.1.1.1.1.1
The number of shelves configured to be present in this node.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeAdmnTelnetLogin		1.3.6.1.4.1.2879.2.1.1.1.1.1.2
Tok_String
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusNodeStatusObjects		1.3.6.1.4.1.2879.2.1.1.1.1.2
OBJECT IDENTIFIER

sonusNodeStatShelvesPresent		1.3.6.1.4.1.2879.2.1.1.1.1.2.1
The number of shelves currently present in this node.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeStatNextIfIndex		1.3.6.1.4.1.2879.2.1.1.1.1.2.2
This MIB object identifies the next ifIndex to use in the creation of an interface. This MIB object directly corresponds to the ifIndex MIB object in the ifTable. A value of 0 means that no next ifIndex is currently available.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeStatMgmtStatus		1.3.6.1.4.1.2879.2.1.1.1.1.2.3
Identifies if this node can be effectively managed by a network management system. A value of 'manageable' indicates that it can be; the other values indicate that a significant operation is in progress and that a network management system should minimize any requests of this node.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	manageable(1), softwareUpgradeInProgress(2), softwareUpgradeFailed(3)

sonusNodeShelfAdmnTable		1.3.6.1.4.1.2879.2.1.1.1.1.3
This table contains information about each shelf which is configured to be a member of the node. This table describes the configured characteristics of each shelf, including the shelve's identity (sonusNodeShelfAdmnIpaddr1 and sonusNodeShelfAdmnIpaddr2). A row must be created by the manager for every slave shelf that is to join the master shelf as part of the node. Slave shelves which do not have correct entries in this table, can not join the node. A management entity may create rows for shelves that are anticipated to join the node in the future.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeShelfAdmnEntry

sonusNodeShelfAdmnEntry		1.3.6.1.4.1.2879.2.1.1.1.1.3.1
This table describes the shelves that are configured as members of the GSX9000 Switch node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeShelfAdmnEntry

sonusNodeShelfAdmnIndex		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.1
Identifies the target shelf in the node. Each node may be compprised of one or more shelves. The maximum number of shelves allowed in a node is six.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeShelfAdmnState		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.2
The configured state of the target shelf in the node.
Status: current	Access: read-create
OBJECT-TYPE
	SonusAdminState

sonusNodeShelfAdmnIpaddr1		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.3
The IP Address of the shelf. This value identifies the shelf that may join the node. Each shelf has two IP addresses that it may be reached by. This is the first of those two addresses. Note that it is not possible to change this object on the master shelf. That would be tantamount to changing that shelf's IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

sonusNodeShelfAdmnIpaddr2		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.4
The IP Address of the shelf. This value identifies the shelf that may join the node. Each shelf has two IP addresses that it may be reached by. This is the second of those two addresses. Note that it is not possible to change this object on the master shelf. That would be tantamount to changing the shelf's IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

sonusNodeShelfAdmn48VdcAState		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.5
The configured state of the shelf's 48 VDC A-power supply. Indicates whether the A supply SHOULD be present. This object is not capable of disabling a connected supply.
Status: current	Access: read-create
OBJECT-TYPE
	SonusAdminState

sonusNodeShelfAdmn48VdcBState		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.6
The configured state of the shelf's 48 VDC B-power supply. Indicates whether the B supply SHOULD be present. This object is not capable of disabling a connected supply.
Status: current	Access: read-create
OBJECT-TYPE
	SonusAdminState

sonusNodeShelfAdmnStatus		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.7
The status of the indexed shelf in the GSX9000 node. If the value of this object is not accepted(3) or shuttingDown(4), then the objects in Sonus Shelf Status table are unavailable. The value of this object does not reach accepted(3) until after the slave shelf has contacted the master shelf, and has successfully joined the node. A value of shuttingDown(4) indicates the shelf will be unavailable shortly.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	absent(1), detected(2), accepted(3), shuttingDown(4)

sonusNodeShelfAdmnRestart		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.8
This object is used to reset a shelf in the node. The object causes the management servers on the indexed shelf to perform the indicated operation. The restart(2) operation causes the management servers to reboot. The shutdown(3) operation causes the management servers to disable power to all cards on the indexed shelf, including themselves. The shutdown(3) operation requires physical intervention to re-power the shelf. This object always reads as unknown(1).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(1), restart(2), shutdown(3)

sonusNodeShelfAdmnRowStatus		1.3.6.1.4.1.2879.2.1.1.1.1.3.1.9
This object indicates the row status for this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

sonusNodeShelfStatTable		1.3.6.1.4.1.2879.2.1.1.1.1.4
This table contains status information about each shelf in the GSX9000 Switch node. Shelves within the node can can be configured before they are physically attached to the node. Shelves that are attached may not be powered or correctly configured as a slave. Therefore, it is possible that a slave shelf can not be detected, and is absent. The value of sonusNodeShelfAdmnStatus indicates the availability of this shelf. If the sonusNodeShelfAdmnStatus value for the index shelf does not indicate a status value of 'accepted', then this status table is not available.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeShelfStatEntry

sonusNodeShelfStatEntry		1.3.6.1.4.1.2879.2.1.1.1.1.4.1
This table describes the shelves that are configured as members of the GSX9000 Switch node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeShelfStatEntry

sonusNodeShelfStatIndex		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.1
Identifies the target shelf within the node. Returns the same value as sonusNodeShelfStatIndex, the index into this instance.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeShelfStatSlots		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.2
The number of physical slots present in this shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusNodeShelfStatSerialNumber		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.3
Identifies the Sonus serial number for this shelf.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeShelfStatType		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.4
Identifies the Sonus shelf type. A shelf may be either the master shelf for the node, or it may be one of several slave shelves in the node. Every node contains exactly one master shelf. The master shelf in the management focal point for the node.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	slave(1), master(2)

sonusNodeShelfStatFan		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.5
Identifies the status of the shelf's fan tray. A controllerFailure(2) indicates that the fan status can not be obtained. In that case in can not be determined if the fans are operational, or experiencing other failures as well.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notPresent(1), controllerFailure(2), singleFailure(3), multipleFailures(4), powerFailure(5), operational(6)

sonusNodeShelfStat48VAStatus		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.6
The status of the shelf's 48 VDC A-power supply.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	absent(1), present(2)

sonusNodeShelfStat48VBStatus		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.7
The status of the shelf's 48 VDC B-power supply.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	absent(1), present(2)

sonusNodeShelfStatBackplane		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.8
The hardware type ID of the backplane in this shelf.
Status: current	Access: read-only
OBJECT-TYPE
	HwTypeID

sonusNodeShelfStatBootCount		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.9
Specifies the number of times that this shelf has been booted. The boot count is specified from the perspective of the active management module running in the indexed shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeShelfStatTemperature		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.10
Indicates the temperature being sensed at this shelf's intake manifold. The temperature is indicated in Celcius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeShelfStatFanSpeed		1.3.6.1.4.1.2879.2.1.1.1.1.4.1.11
Indicates the speed of the fan.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), high(2)

sonusNodeSrvrAdmnTable		1.3.6.1.4.1.2879.2.1.1.1.1.5
The server module ADMN table describes the configuration of each server module slot in an indexed shelf. A slot in a shelf, MUST be configured to accept a particular server module HWTYPE. If the wrong type of server module is detected in the slot, that server module will not be allowed to complete its boot process. All server modules are held in the RESET state until that server module's state is set to ENABLED. A server module must have its state set to DISABLED, before the row can be deleted. The row must be deleted, and re-created in order to change the HWTYPE of the row. The server module mode must be set to OUTOFSERVICE before the row's state can be set to DISABLED. Deleting a row in this table, clears the server module hardware type association for this slot. THIS IS A MAJOR CONFIGURATION CHANGE. All configured parameters associated with this slot are permanently lost when the server module is deleted. A server module can not be deleted, until it's state has been set to DISABLED. A row's default value for state is DISABLED. The server module located in the slot is immediately placed in reset when its state is set to disabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeSrvrAdmnEntry

sonusNodeSrvrAdmnEntry		1.3.6.1.4.1.2879.2.1.1.1.1.5.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeSrvrAdmnEntry

sonusNodeSrvrAdmnShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.1
Identifies the target shelf. Returns the same value as sonusNodeShelfStatIndex, which was used to index into this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeSrvrAdmnSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.2
Identifies the target slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusNodeSrvrAdmnHwType		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.3
Identifies the type of server module the indexed slot has been configured to accept. Server modules other than this type are rejected by the System Manager. This object is required to create a row instance.
Status: current	Access: read-write
OBJECT-TYPE
	ServerTypeID

sonusNodeSrvrAdmnState		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.4
A server module must be enabled before System Manager will fully recognize it. The server module must be disabled before the server module can be deleted.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusNodeSrvrAdmnMode		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.5
A server module which is outOfService will not accept new calls. When taken out of service, its active calls may either be dried up or terminated, depending on the action specified. Server modules are created with a mode of inService. A server module must be outOfService in order to change its state to disabled.
Status: current	Access: read-write
OBJECT-TYPE
	SonusServiceState

sonusNodeSrvrAdmnAction		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.6
The type of action to perform when a server module is taken out of service. The active calls on the server module can be dried up for a specified dryup limit, or they can be forced to be terminated.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminAction

sonusNodeSrvrAdmnDryupLimit		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.7
Server module dryup limit, specified in minutes. If the server module has not dried up by the time this limit expires, the remaining active calls are abruptly terminated. A dryup limit of zero indicates that the system will wait forever for the dryup to complete.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

sonusNodeSrvrAdmnDumpState		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.8
Indicates if a server module will create a crashblock file when a critical error which prevents the module from continuing, has occured.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusNodeSrvrAdmnRowStatus		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.9
Deleting a server module will place that slot in reset. All configuration parameters associated with the server module in this slot are destroyed.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

sonusNodeSrvrAdmnRedundancyRole		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.10
Specifies the redundancy role this server module will play. This object is required to create a row instance.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), redundant(2)

sonusNodeSrvrAdmnAdapHwType		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.11
Identifies the type of adapter module the indexed slot has been configured to accept. Adapter modules other than this type are rejected by the System Manager. This object is required to create a row instance.
Status: current	Access: read-write
OBJECT-TYPE
	AdapterTypeID

sonusNodeSrvrAdmnSpecialFunction		1.3.6.1.4.1.2879.2.1.1.1.1.5.1.12
Specifies the logical function for this server module. This object may be specified only at row creation time, but is not required. If not specified, an appropriate default value will be assigned based on the server and adapter hardware types. A value of default(1) is not accepted or used.
Status: current	Access: read-write
OBJECT-TYPE
	ServerFunctionType

sonusNodeSlotTable		1.3.6.1.4.1.2879.2.1.1.1.1.6
The node slot table describes
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeSlotEntry

sonusNodeSlotEntry		1.3.6.1.4.1.2879.2.1.1.1.1.6.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeSlotEntry

sonusNodeSlotShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.1
Identifies the indexed shelf. Returns the same value as sonusNodeShelfStatIndex, which is used to index into this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.2
Identifies the indexed slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusNodeSlotState		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.3
Identifies the operational state of the indexed slot in the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), empty(2), inserted(3), reset(4), boot(5), sonicId(6), coreDump(7), holdOff(8), loading(9), activating(10), activated(11), running(12), faulted(13), powerOff(14), powerFail(15)

sonusNodeSlotHwType		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.4
Identifies the hardware type of the server module which was detected in the slot. Valid only if the sonusNodeSlotState is greater than inserted(2).
Status: current	Access: read-only
OBJECT-TYPE
	HwTypeID

sonusNodeSlotHwTypeRev		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.5
Identifies the hardware type revision of the server module which was detected in the slot. Valid only if the sonusNodeSlotState is greater than inserted(2).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSlotPower		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.6
Identifies the server modules power mode. If the slot state is empty, the power status is unknown(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), powerFault(2), powerOK(3)

sonusNodeSlotAdapState		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.7
Identifies the adapter state of the indexed slot in the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), empty(2), present(3), faulted(4)

sonusNodeSlotAdapHwType		1.3.6.1.4.1.2879.2.1.1.1.1.6.1.8
Identifies the hardware type of the adapter module which was detected in the slot. Valid only if the sonusNodeSlotAdapState is present(3).
Status: current	Access: read-only
OBJECT-TYPE
	HwTypeID

sonusNodeSrvrStatTable		1.3.6.1.4.1.2879.2.1.1.1.1.7
The node server status table describes the status of the indexed server module in the node. This table is unavailable if the sonusNodeShelfStatStatus object indicates that this slot is empty. If the sonusNodeSrvrStatType object returns either 'absent' or 'unknown' the value of all other objects within this table are indeterministic.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeSrvrStatEntry

sonusNodeSrvrStatEntry		1.3.6.1.4.1.2879.2.1.1.1.1.7.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeSrvrStatEntry

sonusNodeSrvrStatShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.1
Identifies the target shelf. Returns the same value as sonusNodeShelfStatIndex, which was used to index into this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeSrvrStatSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.2
Identifies the target slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusNodeSrvrStatMiddVersion		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.3
Identifies the version of the MIDD EEPROM on this server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatHwType		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.4
Identifies the type of server module in the indexed slot.
Status: current	Access: read-only
OBJECT-TYPE
	HwTypeID

sonusNodeSrvrStatSerialNum		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.5
Identifies the serial number of the server module. This is the serial number assigned to the server module at manufacture.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeSrvrStatPartNum		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.6
Identifies the part number of the module. This is the part number assigned to the module at manufacture.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeSrvrStatPartNumRev		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.7
Identifies the manufacture part number revision level of the server module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..2)

sonusNodeSrvrStatMfgDate		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.8
The date this server module assembly was manufactured.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeSrvrStatFlashVersion		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.9
Identifies the version of the firmware within the non-volatile FLASH device on this server module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

sonusNodeSrvrStatSwVersion		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.10
Identifies the version of the runtime software application this is currently executing on this server module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

sonusNodeSrvrStatBuildNum		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.11
Identifies the build number of this software version.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatMode		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.12
Identifies the operational status of the module in the indexed slot.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	standby(1), active(2)

sonusNodeSrvrStatTemperature		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.13
Indicates the current Celcius temperature being sensed by the server module in the indexed slot.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatMemUtilization		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.14
The current memory utilization of this server module. The value returned is a number from 0 to 100, representing the percentage of memory utilization. Note that this number can be somewhat misleading as many data structures are pre-allocated to ensure that the server modules maximum load capacity can be acheived and maintained. This may result is relatively high memory utilizations under fairly low load.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatCpuUtilization		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.15
The current CPU utilization of this server module. The value returned is a number from 0 to 100, representing the percentage of CPU utilization.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatHwTypeRev		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.16
The hardware type revision number of this server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatSwVersionCode		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.17
Octet string that identifies the version of the runtime software application that is currently executing on this server module: Byte(s) Code ------- ---- 0 major version 1 minor version 2 release version 3 type (1:alpha, 2:beta, 3:release, 4:special) 4-5 type number
Status: current	Access: read-only
OBJECT-TYPE
	SonusSoftwareVersion

sonusNodeSrvrStatEpldRev		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.18
The EPLD revision level of this server module. An overall number which represents the total level of the server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatHostName		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.19
Identifies the host name that software load of this module had been built on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..64)

sonusNodeSrvrStatUserName		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.20
Identifies the user who builds software load of this module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

sonusNodeSrvrStatViewName		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.21
Identifies the viewName used for software build.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

sonusNodeSrvrStatTotalMem		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.22
Indicates the total memory size of the server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatFreeMem		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.23
Indicates the total memory available on the server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatTotalSharedMem		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.24
Indicates the total shared memory size of the server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeSrvrStatFreeSharedMem		1.3.6.1.4.1.2879.2.1.1.1.1.7.1.25
Indicates the total shared memory available on the server module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeAdapStatTable		1.3.6.1.4.1.2879.2.1.1.1.1.11
The node adapter status table describes the status of the indexed adapter module in the node. This table is unavailable if the sonusNodeSlotAdapState object indicates that this slot is unknown, empty or faulted.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeAdapStatEntry

sonusNodeAdapStatEntry		1.3.6.1.4.1.2879.2.1.1.1.1.11.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeAdapStatEntry

sonusNodeAdapStatShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.1
Identifies the target shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeAdapStatSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.2
Identifies the target slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusNodeAdapStatMiddVersion		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.3
Identifies the version of the MIDD EEPROM on this adapter module.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeAdapStatHwType		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.4
Identifies the type of adapter module in the indexed slot.
Status: current	Access: read-only
OBJECT-TYPE
	HwTypeID

sonusNodeAdapStatHwTypeRev		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.5
Identifies the hardware type revision of the adapter module detected in the slot.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusNodeAdapStatSerialNum		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.6
Identifies the serial number of the adapter module. This is the serial number assigned to the card at manufacture.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeAdapStatPartNum		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.7
Identifies the part number of the adapter module. This is the part number assigned to the card at manufacture.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeAdapStatPartNumRev		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.8
Identifies the assembly revision level of the adapter module.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..2)

sonusNodeAdapStatMfgDate		1.3.6.1.4.1.2879.2.1.1.1.1.11.1.9
The date this adapter module was manufactured.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..10)

sonusNodeSlotAdmnTable		1.3.6.1.4.1.2879.2.1.1.1.1.12
The node slot admn table provides physical manipulation of a slot location in a shelf.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNodeSlotAdmnEntry

sonusNodeSlotAdmnEntry		1.3.6.1.4.1.2879.2.1.1.1.1.12.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNodeSlotAdmnEntry

sonusNodeSlotAdmnShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.1.12.1.1
Identifies the target shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNodeSlotAdmnSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.1.12.1.2
Identifies the target slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusNodeSlotAdmnReset		1.3.6.1.4.1.2879.2.1.1.1.1.12.1.3
Setting this object to reset(2) or coredump(3), will physically reset the server module installed in the indexed slot. This object always reads as undefined(1). This object bypasses all consistency and safety checks. This object is intended for evaluation testing.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	undefined(1), reset(2), coredump(3)

sonusNvsConfig		1.3.6.1.4.1.2879.2.1.1.1.2
OBJECT IDENTIFIER

sonusNvsConfigTable		1.3.6.1.4.1.2879.2.1.1.1.2.1
This table specifies the Boot Parameters that apply only to the MNS present in the indexed shelf and slot. The Boot Parameters can only be accessed if the shelf is actively part of the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNvsConfigEntry

sonusNvsConfigEntry		1.3.6.1.4.1.2879.2.1.1.1.2.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNvsConfigEntry

sonusBparamShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.1
Identifies the target shelf. This object returns the value of sonusNodeShelfStatIndex which was used to index into this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusBparamUnused		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.2
Unused
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

sonusBparamPasswd		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.3
The secure password which is used to access the Boot PROM menu subsystem. This object is not available through SNMP.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..23)

sonusBparamIpAddrSlot1Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.4
The IP address assigned to the field service port. This port is not intended for customer use.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpMaskSlot1Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.5
The IP Address Mask assigned to the field service port.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpGatewaySlot1Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.6
The default IP Gateway address used by the field service port.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIfSpeedTypeSlot1Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.7
The default link speed setting used by the field service port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	autoNegotiate(1), fullDuplex100(2), halfDuplex100(3), fullDuplex10(4), halfDuplex10(5)

sonusBparamIpAddrSlot1Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.8
The IP address assigned to management port number one.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpMaskSlot1Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.9
The IP address mask used by management port one.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpGatewaySlot1Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.10
The default IP Gateway address used by management port one.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIfSpeedTypeSlot1Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.11
The default link speed setting used by management port one.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	autoNegotiate(1), fullDuplex100(2), halfDuplex100(3), fullDuplex10(4), halfDuplex10(5)

sonusBparamIpAddrSlot1Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.12
The IP address assigned to management port number two.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpMaskSlot1Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.13
The IP address mask used by management port two.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpGatewaySlot1Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.14
The default gateway address used by management port two.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIfSpeedTypeSlot1Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.15
The default link speed setting used by management port two.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	autoNegotiate(1), fullDuplex100(2), halfDuplex100(3), fullDuplex10(4), halfDuplex10(5)

sonusBparamIpAddrSlot2Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.16
The IP address assigned to the field service port. This port is not intended for customer use.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpMaskSlot2Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.17
The IP Address Mask assigned to the field service port.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpGatewaySlot2Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.18
The default IP Gateway address used by the field service port.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIfSpeedTypeSlot2Port0		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.19
The default link speed setting used by the field service port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	autoNegotiate(1), fullDuplex100(2), halfDuplex100(3), fullDuplex10(4), halfDuplex10(5)

sonusBparamIpAddrSlot2Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.20
The IP address assigned to management port number one.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpMaskSlot2Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.21
The IP address mask used by management port one.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpGatewaySlot2Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.22
The default IP Gateway address used by management port one.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIfSpeedTypeSlot2Port1		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.23
The default link speed setting used by management port one.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	autoNegotiate(1), fullDuplex100(2), halfDuplex100(3), fullDuplex10(4), halfDuplex10(5)

sonusBparamIpAddrSlot2Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.24
The IP address assigned to management port number two.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpMaskSlot2Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.25
The IP address mask used by management port two.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIpGatewaySlot2Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.26
The default gateway address used by management port two.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamIfSpeedTypeSlot2Port2		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.27
The default link speed setting used by management port two.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	autoNegotiate(1), fullDuplex100(2), halfDuplex100(3), fullDuplex10(4), halfDuplex10(5)

sonusBparamBootDelay		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.28
The amount of delay used to allow an administrator to gain access to the NVS configuration menus before the runtime software is loaded. The delay is specified in seconds. Increasing this delay, will increase the total system boot time by the same amount.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..255

sonusBparamCoreState		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.29
Specifies whether core dumps are enabled. If core dumps are disabled, a fatal software fault will result in a reboot without the overhead of performing the core dump operation.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusBparamCoreLevel		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.30
Specifies the type of core dump behavior the shelf will display. Under normal(1) behavior, the server modules will execute a core dump only for fatal software errors. Under sensitive(2) behavior, the server modules will execute a core dump when the software recognizes a major, but non-fatal, software fault. Normal(1) is the strongly recommended setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), sensitive(2)

sonusBparamBaudRate		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.31
The baud rate of a management port's physical interface.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sonusBparamNfsPrimary		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.32
The IP Address of the primary NFS Server for this switch.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamNfsSecondary		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.33
The IP Address of the secondary NFS Server for this switch.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sonusBparamNfsMountPri		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.34
The NFS mount point exported by the Primary NFS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2..31)

sonusBparamNfsMountSec		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.35
The NFS mount point exported by the Secondary NFS server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2..31)

sonusBparamNfsPathUpgrade		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.36
The name of the temporary load path override. This path is tried before the sonusBparamNfsPathLoad when specified. If the sonusBparamNfsPathUpgrade fails to completely boot the switch after three consecutive attempts, the path is automatically abandoned in favor of the sonusBparamNfsPathLoad.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

sonusBparamNfsPathLoad		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.37
The directory, beneath the exported NFS mount point, which contains the switch's operational directories.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2..31)

sonusBparamPrimName		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.38
The primary load file name for this server module.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..15)

sonusBparamSecName		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.39
The secondary load file name for this server module. The secondary file is tried when the primary file can not be opened or read.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

sonusBparamMasterState		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.40
Specifies whether this shelf will participate in the node as a master shelf, or as a slave shelf. Each node contains exactly one master shelf, and may contain multiple slave shelves.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	slave(1), master(2)

sonusBparamParamMode		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41
Specifies the binary parameter file mode of the node. This mode specifies whether the node will attempt to load a binary parameter file. The paramMode can be set to disabled(1) which disables parameter file loading. The mode can be set to defaults(3), which temporarily disables binary parameter file loading, until after the next binary parameter file save cycle initiated by the runtime software. In both of these disabled cases, the node boots with default parameters and automatically loads and executes the CLI startup script. The paramMode may be set to binaryFile(2), which enables binary parameter file loading and disables the automatic CLI startup script loading. A binary parameter file must exist before the node can succesfully load a binary parameter file. The node will load default parameters when a valid parameter file can not be loaded. The node loads default parameters when either the parameter mode is set to disabled(1) or when the mode is set to defaults(3). When the mode is set to defaults(3), the mode is automatically updated to binaryFile(2) on the first parameter save cycle.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), binaryFile(2), defaults(3)

sonusBparamCliScript		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.42
The name of the CLI script which will be run automatically when the switch intentionally boots with default parameters. The switch will intentionally boot with default parameters when sonusBparamParamMode is set to either disabled(1) or defaults(3). This CLI script will never be run when the sonusBparamParamMode is set to binaryFile(2). If the script is not specified, or if it can not be located, it is not run. The switch expects to find the script file in the cli/sys directory, beneath the load path specified directory.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

sonusBparamUId		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.43
The UNIX user ID used for all file accesses on both the primary and secondary NFS servers.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sonusBparamGrpId		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.44
The UNIX group ID used for all file accesses on both the primary and secondary NFS servers.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sonusBparamCoreDumpLimit		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.45
Indicates the maximum number of core dump files which can be created on behalf of a Server which is requesting a core dump. Setting the value to zero indicates no limit. This object is intended to limit the number of core dumps (and the amount of disk space used) when a Server repeatedly crashes.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

sonusBparamNfsPathSoftware		1.3.6.1.4.1.2879.2.1.1.1.2.1.1.46
The name of the software load path. This path is is appended to the Boot Path. This object may be NULL, in which case the software is loaded directly from the Boot Path. This object allows multiple revisions of software to be maintained below the Boot Path. This object can be overridden by the Upgrade Path object during a LSWU. During general operation the complete software load path is formed by concatenating this object to the Boot Path and any applicable file system mount point.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

sonusFlashConfigTable		1.3.6.1.4.1.2879.2.1.1.1.2.2
This table specifies the FLASH Update parameters for the indexed server module. The Boot Firmware for each server module is contained in the FLASH device. It is essential that once the upgrade process is initiated, that it be allowed to complete without interruption. Power loss or manually reseting the server module during the upgrade process will result in a loss of Boot Firmware.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusFlashConfigEntry

sonusFlashConfigEntry		1.3.6.1.4.1.2879.2.1.1.1.2.2.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusFlashConfigEntry

sonusFlashAdmnShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.2.2.1.1
Identifies the target shelf within the node.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusFlashAdmnSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.2.2.1.2
Identifies the target slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusFlashAdmnUpdateButton		1.3.6.1.4.1.2879.2.1.1.1.2.2.1.3
Initiate the update of the specified server module's FLASH PROM now. This object always reads as the value update(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	update(1)

sonusFlashStatusTable		1.3.6.1.4.1.2879.2.1.1.1.2.3
This table specifies the status of the FLASH Update process.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusFlashStatusEntry

sonusFlashStatusEntry		1.3.6.1.4.1.2879.2.1.1.1.2.3.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusFlashStatusEntry

sonusFlashStatShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.2.3.1.1
Identifies the target shelf within the node.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusFlashStatSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.2.3.1.2
Identifies the target slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..16

sonusFlashStatState		1.3.6.1.4.1.2879.2.1.1.1.2.3.1.3
The current state of the FLASH update process on the target server module.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), waitReply(2), waitData(3), imageComplete(4), flashErase(5), flashWrite(6), done(7)

sonusFlashStatLastStatus		1.3.6.1.4.1.2879.2.1.1.1.2.3.1.4
The status of the last FLASH update that was executed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), unknown(2), inProgress(3), badRequest(4), noReply(5), managerNack(6), timerResources(7), dataTimeout(8), msgSequence(9), memoryResources(10), imageChecksum(11), badBlkType(12), flashErase(13), flashWrite(14), flashChecksum(15), mgrNack(16), badState(17)

sonusUser		1.3.6.1.4.1.2879.2.1.1.1.3
OBJECT IDENTIFIER

sonusUserList		1.3.6.1.4.1.2879.2.1.1.1.3.1
OBJECT IDENTIFIER

sonusUserListNextIndex		1.3.6.1.4.1.2879.2.1.1.1.3.1.1
The next valid index to use when creating a new sonusUserListEntry
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusUserListTable		1.3.6.1.4.1.2879.2.1.1.1.3.1.2
This table specifies the user access list for the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusUserListEntry

sonusUserListEntry		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusUserListEntry

sonusUserListIndex		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.1
Identifies the target user list entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusUserListState		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.2
The administrative state of this user entry.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusUserListUserName		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.3
The user name of this user.
Status: current	Access: read-write
OBJECT-TYPE
	SonusName

sonusUserListProfileName		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.4
The name of the profile applied to this user entry.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..23)

sonusUserListPasswd		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.5
The password for this user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(4..16)

sonusUserListComment		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.6
A comment that is associated with this user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..31)

sonusUserListAccess		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.7
The priviledge level of this user.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	readOnly(1), readWrite(2), admin(3)

sonusUserListRowStatus		1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.8
Row status object for this table.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

sonusUserListStatusTable		1.3.6.1.4.1.2879.2.1.1.1.3.1.3
This table specifies status of the user access list for the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusUserListStatusEntry

sonusUserListStatusEntry		1.3.6.1.4.1.2879.2.1.1.1.3.1.3.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusUserListStatusEntry

sonusUserListStatusIndex		1.3.6.1.4.1.2879.2.1.1.1.3.1.3.1.1
Identifies the target user list status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..6

sonusUserListStatusLastConfigChange		1.3.6.1.4.1.2879.2.1.1.1.3.1.3.1.2
Octet string that identifies the GMT timestamp of last successful SET PDU from this CLI user. field octects contents range ----- ------- -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..59 7 8 deci-sec 0..9 * Notes: - the value of year is in network-byte order
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

sonusUserProfile		1.3.6.1.4.1.2879.2.1.1.1.3.2
OBJECT IDENTIFIER

sonusUserProfileNextIndex		1.3.6.1.4.1.2879.2.1.1.1.3.2.1
The next valid index to use when creating an entry in the sonusUserProfileTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusUserProfileTable		1.3.6.1.4.1.2879.2.1.1.1.3.2.2
This table specifies the user access list for the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusUserProfileEntry

sonusUserProfileEntry		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusUserProfileEntry

sonusUserProfileIndex		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.1
Identifies the target profile entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusUserProfileName		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.2
The name of this user profile. This object is required to create the table entry.
Status: current	Access: read-write
OBJECT-TYPE
	SonusName

sonusUserProfileUserState		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.3
The administrative state of this profiled user entry.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusUserProfileUserPasswd		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.4
The password for the profiled user entry.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(4..16)

sonusUserProfileUserComment		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.5
The comment that is associated with the profiled user entry.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..31)

sonusUserProfileUserAccess		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.6
The priviledge level of the profiled user entry.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAccessLevel

sonusUserProfileUserCommentState		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.7
Indicates whether the sonusUserProfileUserComment object is present in this user profile.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusUserProfileUserPasswdState		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.8
Indicates whether the sonusUserProfileUserPasswd object is present in this user profile.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusUserProfileUserAccessState		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.9
Indicates whether the sonusUserProfileUserAccess object is present in this user profile.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusUserProfileUserStateState		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.10
Indicates whether the sonusUserProfileUserState object is present in this user profile.
Status: current	Access: read-write
OBJECT-TYPE
	SonusAdminState

sonusUserProfileRowStatus		1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.11
Tok_String
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

sonusSwLoad		1.3.6.1.4.1.2879.2.1.1.1.4
OBJECT IDENTIFIER

sonusSwLoadTable		1.3.6.1.4.1.2879.2.1.1.1.4.1
This table specifies the hardware type based software load table for the server modules in the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusSwLoadEntry

sonusSwLoadEntry		1.3.6.1.4.1.2879.2.1.1.1.4.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusSwLoadEntry

sonusSwLoadAdmnIndex		1.3.6.1.4.1.2879.2.1.1.1.4.1.1.1
Identifies the target software load entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..32

sonusSwLoadAdmnImageName		1.3.6.1.4.1.2879.2.1.1.1.4.1.1.2
Identifies the name of the image to load for the hardware type identified by sonusSwLoadAdmnHwType.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..15)

sonusSwLoadAdmnHwType		1.3.6.1.4.1.2879.2.1.1.1.4.1.1.3
Identifies the target hardware type for the load image. This object can only be written at row creation.
Status: current	Access: read-write
OBJECT-TYPE
	ServerTypeID

sonusSwLoadAdmnRowStatus		1.3.6.1.4.1.2879.2.1.1.1.4.1.1.4
The RowStatus object for this row.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

sonusSwLoadSpecTable		1.3.6.1.4.1.2879.2.1.1.1.4.2
This table specifies the hardware type based software load table for the server modules in the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusSwLoadSpecEntry

sonusSwLoadSpecEntry		1.3.6.1.4.1.2879.2.1.1.1.4.2.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusSwLoadSpecEntry

sonusSwLoadSpecAdmnShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.4.2.1.1
Identifies the target shelf for this load entry entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusSwLoadSpecAdmnSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.4.2.1.2
Identifies the target slot within the chassis for this load entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusSwLoadSpecAdmnImageName		1.3.6.1.4.1.2879.2.1.1.1.4.2.1.3
Identifies the name of the image to load.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

sonusSwLoadSpecAdmnRowStatus		1.3.6.1.4.1.2879.2.1.1.1.4.2.1.4
The RowStatus object for this row.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

sonusParam		1.3.6.1.4.1.2879.2.1.1.1.5
OBJECT IDENTIFIER

sonusParamStatusObjects		1.3.6.1.4.1.2879.2.1.1.1.5.1
OBJECT IDENTIFIER

sonusParamSaveSeqNumber		1.3.6.1.4.1.2879.2.1.1.1.5.1.1
The parameter save sequence number assigned to this parameter file.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamSaveTimeStart		1.3.6.1.4.1.2879.2.1.1.1.5.1.2
The system uptime, measured in milliseconds, when the last parameter save cycle started.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamSaveTimeStop		1.3.6.1.4.1.2879.2.1.1.1.5.1.3
The system uptime, measured in milliseconds, when the last parameter save cycle ended.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamSaveDuration		1.3.6.1.4.1.2879.2.1.1.1.5.1.4
The measured time in milliseconds to complete the last parameter save cycle.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamSaveTotalBytes		1.3.6.1.4.1.2879.2.1.1.1.5.1.5
The number of bytes contained in the last binary parameter file saved.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamSaveTotalRecords		1.3.6.1.4.1.2879.2.1.1.1.5.1.6
The number of individual parameter records contained in the last binary parameter file saved.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamSaveFilename		1.3.6.1.4.1.2879.2.1.1.1.5.1.7
Identifies the name of the image to load for the hardware type identified by sonusSwLoadAdmnHwType.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..31)

sonusParamSaveState		1.3.6.1.4.1.2879.2.1.1.1.5.1.8
The current state of the active Management Server's parameter saving process.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), synchronize(2), lock(3), holdoff(4), fopen(5), collect(6), fclose(7), done(8), retry(9)

sonusParamLoadServer		1.3.6.1.4.1.2879.2.1.1.1.5.1.9
The IP Address of the NFS server from which parameters were loaded from.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

sonusParamLoadFileType		1.3.6.1.4.1.2879.2.1.1.1.5.1.10
The type of binary parameter which was loaded. Under normal circumstances, the primary(1) parameter file will always be loaded. When default parameters are used, no parameter file is loaded, and the value none(4) is used for the file type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), backup(2), temporary(3), none(4)

sonusParamLoadStatus		1.3.6.1.4.1.2879.2.1.1.1.5.1.11
Indicates the status of the last binary parameter file load. The value defaults(1) indicates that parameters were not loaded and that the node began with default parameters. The value success(2) indicates that a binary parameter file was successfully loaded when the node booted. The value paramError(3) indicates that the node attempted to load a binary parameter file and that there was an error in the processing of the file. The node may be running with a partial parameter file when this error is indicated.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	defaults(1), success(2), paramError(3)

sonusParamLoadSeqNumber		1.3.6.1.4.1.2879.2.1.1.1.5.1.12
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamLoadTotalRecords		1.3.6.1.4.1.2879.2.1.1.1.5.1.13
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamLoadTotalBytes		1.3.6.1.4.1.2879.2.1.1.1.5.1.14
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamLoadDuration		1.3.6.1.4.1.2879.2.1.1.1.5.1.15
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sonusParamLoadSerialNum		1.3.6.1.4.1.2879.2.1.1.1.5.1.16
Identifies the serial number of the node which created the parameter file loaded by this node.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..31)

sonusParamSavePrimarySrvrState		1.3.6.1.4.1.2879.2.1.1.1.5.1.17
The current state of parameter saving to this NFS server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), failed(2), failing(3), behind(4), current(5), ahead(6)

sonusParamSavePrimarySrvrReason		1.3.6.1.4.1.2879.2.1.1.1.5.1.18
The failure code associated with the last parameter save pass to this NFS server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), create(2), fopen(3), header(4), timer(5), nfs(6), flush(7), write(8), close(9), move(10), memory(11), none(12)

sonusParamSaveSecondarySrvrState		1.3.6.1.4.1.2879.2.1.1.1.5.1.19
The current state of parameter saving to this NFS server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), failed(2), failing(3), behind(4), current(5), ahead(6)

sonusParamSaveSecondarySrvrReason		1.3.6.1.4.1.2879.2.1.1.1.5.1.20
The failure code associated with the last parameter save pass to this NFS server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), create(2), fopen(3), header(4), timer(5), nfs(6), flush(7), write(8), close(9), move(10), memory(11), none(12)

sonusParamLastSaveTime		1.3.6.1.4.1.2879.2.1.1.1.5.1.21
Octet string that identifies the GMT timestamp of last successful PIF write. field octects contents range ----- ------- -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..59 7 8 deci-sec 0..9 * Notes: - the value of year is in network-byte order
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

sonusParamAdminObject		1.3.6.1.4.1.2879.2.1.1.1.5.2
OBJECT IDENTIFIER

sonusParamAdmnMaxIncrPifs		1.3.6.1.4.1.2879.2.1.1.1.5.2.1
The maximum of Incremental PIF files saved per NFS server
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..10

sonusNfs		1.3.6.1.4.1.2879.2.1.1.1.6
OBJECT IDENTIFIER

sonusNfsAdmnTable		1.3.6.1.4.1.2879.2.1.1.1.6.1
This table specifies the configurable NFS options for each MNS in each shelf.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNfsAdmnEntry

sonusNfsAdmnEntry		1.3.6.1.4.1.2879.2.1.1.1.6.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNfsAdmnEntry

sonusNfsAdmnShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.6.1.1.1
Identifies the target shelf. This object returns the value of sonusNodeShelfStatIndex which was used to index into this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNfsAdmnSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.6.1.1.2
Identifies the target MNS module slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2

sonusNfsAdmnMountServer		1.3.6.1.4.1.2879.2.1.1.1.6.1.1.3
Mounts the Primary or Secondary NFS server using mount parameters obtained from the NVS Boot parameters sonusBparamNfsPrimary or sonusBparamNfsSecondary, and sonusBparamNfsMountPri or sonusBparamNfsMountSec. Continuous retries will occur until the mount succeeds. This object is always read as noop(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noop(1), primary(2), secondary(3)

sonusNfsAdmnUnmountServer		1.3.6.1.4.1.2879.2.1.1.1.6.1.1.4
Unmounts the standby NFS server. Note: unmounting this server will disrupt any file I/O currently taking place on it. Continuous retries will occur until the unmount succeeds. This object is always read as noop(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noop(1), standby(2)

sonusNfsAdmnToggleActiveServer		1.3.6.1.4.1.2879.2.1.1.1.6.1.1.5
Toggles the Active NFS server between the Primary and Secondary, provided both servers are currently mounted. This object is always read as noop(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noop(1), toggle(2)

sonusNfsAdmnSetWritable		1.3.6.1.4.1.2879.2.1.1.1.6.1.1.6
Clears the perception of a read-only condition on the Primary or Secondary NFS server, so that server will be considered viable as the Active server. This object is always read as noop(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noop(1), primary(2), secondary(3)

sonusNfsStatTable		1.3.6.1.4.1.2879.2.1.1.1.6.2
This table specifies NFS status objects for each MNS in each shelf.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SonusNfsStatEntry

sonusNfsStatEntry		1.3.6.1.4.1.2879.2.1.1.1.6.2.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SonusNfsStatEntry

sonusNfsStatShelfIndex		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.1
Identifies the target shelf. This object returns the value of sonusNodeShelfStatIndex which was used to index into this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..6

sonusNfsStatSlotIndex		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.2
Identifies the target MNS module slot within the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2

sonusNfsStatPrimaryStatus		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.7
Indicates the mount status of the Primary NFS server: mounted and functioning properly, attemping to mount, indefinitely unmounted, attempting to unmount, mounted but read-only, testing connectivity, server failure, or invalid NFS parameters.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	mounted(1), mounting(2), unmounted(3), unmounting(4), readOnly(5), testing(6), failed(7), invalid(8)

sonusNfsStatSecondaryStatus		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.8
Indicates the mount status of the Secondary NFS server: mounted and functioning properly, attemping to mount, indefinitely unmounted, attempting to unmount, mounted but read-only, testing connectivity, server failure, or invalid NFS parameters.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	mounted(1), mounting(2), unmounted(3), unmounting(4), readOnly(5), testing(6), failed(7), invalid(8)

sonusNfsStatActiveServer		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.9
Indicates the current Active NFS server. This may change due to NFS failures or NFS administrative operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), primary(2), secondary(3)

sonusNfsStatStandbyServer		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.10
Indicates the current Standby NFS server. This may change due to NFS failures or NFS administrative operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), primary(2), secondary(3)

sonusNfsStatPrimaryIP		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.11
The IP Address of the currently mounted Primary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsPrimary without unmounting and remounting the Primary server.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

sonusNfsStatSecondaryIP		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.12
The IP Address of the currently mounted Secondary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsSecondary without unmounting and remounting the Secondary server.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

sonusNfsStatPrimaryMount		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.13
The mount point currently in use on the Primary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsMountPri without unmounting and remounting the Primary server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..32)

sonusNfsStatSecondaryMount		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.14
The mount point currently in use on the Secondary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsMountSec without unmounting and remounting the Secondary server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..32)

sonusNfsStatPrimaryLastError		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.15
Last consequential error received from the Primary NFS server. This object is reset to none(1) if the server is remounted.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), badVolumeStructure(2), tooManyFiles(3), volumeFull(4), serverHardError(5), quotaExceeded(6), staleNfsHandle(7), nfsTimeout(8), rpcCanNotSend(9), noAccess(10), other(11)

sonusNfsStatSecondaryLastError		1.3.6.1.4.1.2879.2.1.1.1.6.2.1.16
Last consequential error received from the Secondary NFS server. This object is reset to none(1) if the server is remounted.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), badVolumeStructure(2), tooManyFiles(3), volumeFull(4), serverHardError(5), quotaExceeded(6), staleNfsHandle(7), nfsTimeout(8), rpcCanNotSend(9), noAccess(10), other(11)

sonusNodeMIBNotifications		1.3.6.1.4.1.2879.2.1.1.2
OBJECT IDENTIFIER

sonusNodeMIBNotificationsPrefix		1.3.6.1.4.1.2879.2.1.1.2.0
OBJECT IDENTIFIER

sonusNodeMIBNotificationsObjects		1.3.6.1.4.1.2879.2.1.1.2.1
OBJECT IDENTIFIER

sonusNfsServer		1.3.6.1.4.1.2879.2.1.1.2.1.1
The NFS server referred to by the trap.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), secondary(2)

sonusNfsRole		1.3.6.1.4.1.2879.2.1.1.2.1.2
Role assumed by the NFS server referred to by the trap.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), standby(2)

sonusNfsServerIp		1.3.6.1.4.1.2879.2.1.1.2.1.3
The IP address of the NFS server referred to by the trap.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

sonusNfsServerMount		1.3.6.1.4.1.2879.2.1.1.2.1.4
The mount point used on the NFS server referred to by the trap.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..32)

sonusNfsReason		1.3.6.1.4.1.2879.2.1.1.2.1.5
The reason for the generation of the trap - administrative operation (mount, unmount, or toggle), server failure, server not writable, or server recovery.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	adminOperation(1), serverFailure(2), serverNotWritable(3), serverRecovery(4)

sonusNfsErrorCode		1.3.6.1.4.1.2879.2.1.1.2.1.6
The NFS error that occurred.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), badVolumeStructure(2), tooManyFiles(3), volumeFull(4), serverHardError(5), quotaExceeded(6), staleNfsHandle(7), nfsTimeout(8), rpcCanNotSend(9), noAccess(10), other(11)

sonusNodeShelfPowerA48VdcNormalNotification		1.3.6.1.4.1.2879.2.1.1.2.0.1
A sonusShelfPowerA48VdcNormal trap indicates that 48V DC source A is operating normally for the specified shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfPowerB48VdcNormalNotification		1.3.6.1.4.1.2879.2.1.1.2.0.2
A sonusShelfPowerB48VdcNormal trap indicates that 48V DC source B is operating normally for the specified shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfPowerA48VdcFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.3
A sonusShelfPowerA48VdcFailure trap indicates that 48V DC source A has failed for the specified shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfPowerB48VdcFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.4
A sonusShelfPowerB48VdcFailure trap indicates that 48V DC source A has failed for the specified shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfFanTrayFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.5
A sonusNodeShelfFanTrayFailure trap indicates that the fan controller on the specified shelf is indicating a problem. The Event Log should be examined for more detail. The fan tray should be replaced immediately.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfFanTrayOperationalNotification		1.3.6.1.4.1.2879.2.1.1.2.0.6
A sonusNodeShelfFanTrayOperational trap indicates that the fan controller is fully operational on the specified shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfFanTrayRemovedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.7
A sonusNodeShelfFanTrayRemoved trap indicates that the fan tray has been removed from the specified shelf. The fan tray should be replaced as soon as possible to avoid damage to the equipment as a result of overheating.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfFanTrayPresentNotification		1.3.6.1.4.1.2879.2.1.1.2.0.8
A sonusNodeShelfFanTrayPresent trap indicates that a fan tray is present for the specified shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfIntakeTempWarningNotification		1.3.6.1.4.1.2879.2.1.1.2.0.9
A sonusNodeShelfIntakeTempWarning trap indicates that the intake temperature of the specified shelf has exceeded 45C degrees.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerTempWarningNotification		1.3.6.1.4.1.2879.2.1.1.2.0.10
A sonusNodeServerTempWarning trap indicates that the operating temperature of the specified shelf and slot has exceeded 60C degrees.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerTempFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.11
A sonusNodeServerTempFailure trap indicates that the operating temperature of the specified shelf and slot has exceeded 70C degrees. A server module operating for any length of time at this temperature is in danger of being physically damaged. The specified module should be disabled and/or removed from the shelf.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerTempNormalNotification		1.3.6.1.4.1.2879.2.1.1.2.0.12
A sonusNodeServerTempNormal trap indicates that the operating temperature of the specified shelf and slot has is below 60C degrees.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerInsertedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.13
A sonusNodeServerInserted trap indicates that a server module has been inserted in the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerRemovedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.14
A sonusNodeServerRemoved trap indicates that a server module has been removed from the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerResetNotification		1.3.6.1.4.1.2879.2.1.1.2.0.15
A sonusNodeServerReset trap indicates that the server module in the specified shelf and slot has been reset.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerOperationalNotification		1.3.6.1.4.1.2879.2.1.1.2.0.16
A sonusNodeServerOperational trap indicates that the booting and initialization has completed successfully for the server module in the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerPowerFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.17
A sonusNodeServerPowerFailure trap indicates that a power failure has been detected for the server module in the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerSoftwareFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.18
A sonusNodeServerSoftwareFailure trap indicates that a software failure has occurred or the server module in the specified shelf and slot. The EventLog should be viewed for possible additional information.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerHardwareFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.19
A sonusNodeServerHardwareFailure trap indicates that a hardware failure has occurred or the server module in the specified shelf and slot. The EventLog should be viewed for possible additional information.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeAdapterInsertedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.20
A sonusNodeAdapterInserted trap indicates that an adapter module has been inserted in the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeAdapterRemovedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.21
A sonusNodeAdpaterRemoved trap indicates that an adapter module has been removed from the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeMtaInsertedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.22
A sonusNodeMtaInserted trap indicates that a Management Timing Adapter has been inserted in the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeMtaRemovedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.23
A sonusNodeMtaRemoved trap indicates that a Management Timing Adapter has been removed from the specified shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeEthernetActiveNotification		1.3.6.1.4.1.2879.2.1.1.2.0.24
A sonusNodeEthernetActive trap indicates that an Ethernet link is active for the specified shelf, slot and port.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeEthernetInactiveNotification		1.3.6.1.4.1.2879.2.1.1.2.0.25
A sonusNodeEthernetInactive trap indicates that an Ethernet link is inactive for the specified shelf, slot and port.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeEthernetDegradedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.26
A sonusNodeEthernetDegraded trap indicates that an Ethernet link is detecting network errors for the specified shelf, slot and port. The EventLog should be viewed for possible additional information.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeBootNotification		1.3.6.1.4.1.2879.2.1.1.2.0.27
The Management Node Server module, in the node's master shelf, has begun the Node Boot process.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeSlaveShelfBootNotification		1.3.6.1.4.1.2879.2.1.1.2.0.28
The Management Node Server module, in a node's slave shelf, has begun the Node Boot process.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeNfsServerSwitchoverNotification		1.3.6.1.4.1.2879.2.1.1.2.0.29
Indicates that the Active NFS server has switched over to the Standby for the specified reason on the MNS in the given shelf and slot. The NFS server specified is the new Active.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeNfsServerOutOfServiceNotification		1.3.6.1.4.1.2879.2.1.1.2.0.30
Indicates that the NFS server specified went out-of-service for the reason provided on the MNS in the given shelf and slot. If it was the result of a server failure, the error that caused the failure is also specified.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeNfsServerInServiceNotification		1.3.6.1.4.1.2879.2.1.1.2.0.31
Indicates that the NFS server specified came in-service for the reason provided on the MNS in the given shelf and slot. The Active/Standby role assumed by the server is also provided.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeNfsServerNotWritableNotification		1.3.6.1.4.1.2879.2.1.1.2.0.32
Indicates that the NFS server specified is no longer writable by the MNS in the given shelf and slot. The error code received is provided.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerDisabledNotification		1.3.6.1.4.1.2879.2.1.1.2.0.33
The server modules administrative state has been set to disabled.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerEnabledNotification		1.3.6.1.4.1.2879.2.1.1.2.0.34
The server modules administrative state has been set to enabled.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeServerDeletedNotification		1.3.6.1.4.1.2879.2.1.1.2.0.35
The server module has been deleted from the node's configuration. All configuration data associated with the server module has been deleted.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusParamBackupLoadNotification		1.3.6.1.4.1.2879.2.1.1.2.0.36
The backup parameter file was loaded. This indicates that the primary parameter file was lost or corrupted. The backup parameter file may contain data which is older than what the primary parameter file contains.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusParamCorruptionNotification		1.3.6.1.4.1.2879.2.1.1.2.0.37
The binary parameter inspected was corrupted. The indicated file was skipped due to corruption. This trap is only transmitted if a valid backup parameter file is located and successfully loaded.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeAdapterMissingNotification		1.3.6.1.4.1.2879.2.1.1.2.0.38
A sonusNodeAdpaterMissing trap indicates that an adapter module has not been detected in a specific shelf and slot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeAdapterFailureNotification		1.3.6.1.4.1.2879.2.1.1.2.0.39
A sonusNodeAdpaterFailure trap indicates that an adapter module has been detected but is not operational.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeSlotResetNotification		1.3.6.1.4.1.2879.2.1.1.2.0.40
A sonusNodeSlotReset trap indicates that a server module in the designated slot was reset.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeParamWriteCompleteNotification		1.3.6.1.4.1.2879.2.1.1.2.0.41
A sonusNodeParamWriteComplete trap indicates that NFS server successfully complete PIF write.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeParamWriteErrorNotification		1.3.6.1.4.1.2879.2.1.1.2.0.42
A sonusNodeParamWriteError trap indicates that error occured during PIF write.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeBootMnsActiveNotification		1.3.6.1.4.1.2879.2.1.1.2.0.43
The Management Node Server module in the specified shelf and slot has become active following a Node Boot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sonusNodeShelfIntakeTempNormalNotification		1.3.6.1.4.1.2879.2.1.1.2.0.44
A sonusNodeShelfIntakeTempNormal trap indicates that the intake temperature of the specified shelf is at or below 45C degrees.
Status: current	Access: read-only
NOTIFICATION-TYPE