SONOMASYSTEMS-SONOMA-ATM-T1-MIB

File: SONOMASYSTEMS-SONOMA-ATM-T1-MIB.mib (11288 bytes)

Imported modules

RFC1155-SMI RFC-1212 SONOMASYSTEMS-SONOMA-MIB

Imported symbols

Counter OBJECT-TYPE sonomaATM

Defined Types

AtmDs1ConfPhyEntry  
SEQUENCE    
  atmDs1ConfPhysIndex INTEGER
  atmDs1ConfLoopback INTEGER
  atmDs1ConfTxClockSelect INTEGER
  atmDs1ConfFillerCells INTEGER
  atmDs1ConfLineBuildOut INTEGER

AtmDs1StatsEntry  
SEQUENCE    
  atmDs1StatsPhysIndex INTEGER
  atmDs1StatsNoSignals Counter
  atmDs1StatsAISDetects Counter
  atmDs1StatsYelAlarmCount Counter
  atmDs1StatsLCVErrors Counter
  atmDs1StatsPCVErrors Counter
  atmDs1StatsMOSErrors Counter
  atmDs1StatsSyncLossCount Counter
  atmDs1StatsHECErrors Counter
  atmDs1StatsSignalLoss INTEGER
  atmDs1StatsAISDetect INTEGER
  atmDs1StatsYellowAlarm INTEGER
  atmDs1StatsSyncLoss INTEGER
  atmDs1StatsTxClockLoss INTEGER
  atmDs1StatsClearCounters INTEGER

Defined Values

sonomaT1ATMAdapterGroup 1.3.6.1.4.1.2926.25.7.5
OBJECT IDENTIFIER    

atmDs1ConfGroup 1.3.6.1.4.1.2926.25.7.5.1
OBJECT IDENTIFIER    

atmDs1StatsGroup 1.3.6.1.4.1.2926.25.7.5.2
OBJECT IDENTIFIER    

atmDs1ConfPhyTable 1.3.6.1.4.1.2926.25.7.5.1.1
A table of physical layer configuration for the DS1 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmDs1ConfPhyEntry

atmDs1ConfPhyEntry 1.3.6.1.4.1.2926.25.7.5.1.1.1
A entry in the table, containing information about the physical layer of a DS1 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmDs1ConfPhyEntry  

atmDs1ConfPhysIndex 1.3.6.1.4.1.2926.25.7.5.1.1.1.1
The physical interface index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmDs1ConfLoopback 1.3.6.1.4.1.2926.25.7.5.1.1.1.2
This object is used to modify the state of internal loopback....
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), payload(2), line(3), local(4)  

atmDs1ConfTxClockSelect 1.3.6.1.4.1.2926.25.7.5.1.1.1.3
Configure the transmit clock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), recovered(2)  

atmDs1ConfFillerCells 1.3.6.1.4.1.2926.25.7.5.1.1.1.4
This parameter indicates the type of filler cells to send when there are no data cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unassigned(1), idle(2)  

atmDs1ConfLineBuildOut 1.3.6.1.4.1.2926.25.7.5.1.1.1.5
This parameter indicates the value selected for the Line Build Out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER short-haul-0-133-FT(1), short-haul-133-266-FT(2), short-haul-266-399-FT(3), short-haul-399-533-FT(4), short-haul-533-655-FT(5), long-haul-0-0-dB(6), long-haul-7-5-dB(7), long-haul-15-0-dB(8), long-haul-22-5-dB(9)  

atmDs1StatsTable 1.3.6.1.4.1.2926.25.7.5.2.1
A table of physical layer statistics information for the DS1 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmDs1StatsEntry

atmDs1StatsEntry 1.3.6.1.4.1.2926.25.7.5.2.1.1
A entry in the table, containing information about the physical layer of a DS1 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmDs1StatsEntry  

atmDs1StatsPhysIndex 1.3.6.1.4.1.2926.25.7.5.2.1.1.1
The physical interface index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmDs1StatsNoSignals 1.3.6.1.4.1.2926.25.7.5.2.1.1.2
No signal error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsAISDetects 1.3.6.1.4.1.2926.25.7.5.2.1.1.3
AIS Detect counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsYelAlarmCount 1.3.6.1.4.1.2926.25.7.5.2.1.1.4
A count of the number of Yellow Alarms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsLCVErrors 1.3.6.1.4.1.2926.25.7.5.2.1.1.5
LCV (Line Code Violation) error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsPCVErrors 1.3.6.1.4.1.2926.25.7.5.2.1.1.6
PCV (Path Code Violation) error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsMOSErrors 1.3.6.1.4.1.2926.25.7.5.2.1.1.7
Multiframe out of sync error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsSyncLossCount 1.3.6.1.4.1.2926.25.7.5.2.1.1.8
Sync Loss counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsHECErrors 1.3.6.1.4.1.2926.25.7.5.2.1.1.9
HEC error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs1StatsSignalLoss 1.3.6.1.4.1.2926.25.7.5.2.1.1.10
Signal loss indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs1StatsAISDetect 1.3.6.1.4.1.2926.25.7.5.2.1.1.11
AIS indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs1StatsYellowAlarm 1.3.6.1.4.1.2926.25.7.5.2.1.1.12
Yellow Alarm indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs1StatsSyncLoss 1.3.6.1.4.1.2926.25.7.5.2.1.1.13
Loss of sync indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs1StatsTxClockLoss 1.3.6.1.4.1.2926.25.7.5.2.1.1.14
Loss of transmit clock indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs1StatsClearCounters 1.3.6.1.4.1.2926.25.7.5.2.1.1.15
Clear all counters in this group ONLY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor