SONOMASYSTEMS-SONOMA-ATM-DS3-MIB

File: SONOMASYSTEMS-SONOMA-ATM-DS3-MIB.mib (14679 bytes)

Imported modules

RFC1155-SMI RFC-1212 SONOMASYSTEMS-SONOMA-MIB

Imported symbols

Counter OBJECT-TYPE sonomaATM

Defined Types

AtmDs3ConfPhyEntry  
SEQUENCE    
  atmDs3ConfPhysIndex INTEGER
  atmDs3ConfFraming INTEGER
  atmDs3ConfInsGFCBits INTEGER
  atmDs3ConfSerBipolarIO INTEGER
  atmDs3ConfScramblePld INTEGER
  atmDs3ConfOverheadPLCP INTEGER
  atmDs3ConfGenerateFEBE INTEGER
  atmDs3ConfGenerateFEAC INTEGER
  atmDs3ConfLoopback INTEGER
  atmDs3ConfCableLength INTEGER
  atmDs3ConfInternalEqualizer INTEGER
  atmDs3ConfFillerCells INTEGER
  atmDs3ConfGenerateClock INTEGER

AtmDs3PhyStatsEntry  
SEQUENCE    
  atmDs3PhyStatsPhysIndex INTEGER
  atmDs3StatsNoSignals Counter
  atmDs3StatsNoDs3Frames Counter
  atmDs3StatsAisDetects Counter
  atmDs3StatsAlarms Counter
  atmDs3StatsFrameErrs Counter
  atmDs3StatsParityErrs Counter
  atmDs3StatsCpErrs Counter
  atmDs3StatsFeBlockErrs Counter
  atmDs3StatsBpvErrs Counter
  atmDs3StatsRemoteAlarms Counter
  atmDs3StatsOutOfCell INTEGER
  atmDs3StatsFifoOverflow INTEGER
  atmDs3StatsRemoteAlarmInd INTEGER
  atmDs3StatsSignalLoss INTEGER
  atmDs3StatsFrameLoss INTEGER
  atmDs3StatsSyncLoss INTEGER
  atmDs3StatsPlcpAlarmState INTEGER
  atmDs3StatsAisState INTEGER
  atmDs3StatsClearCounters INTEGER

Defined Values

sonomaDS3ATMAdapterGroup 1.3.6.1.4.1.2926.25.7.2
OBJECT IDENTIFIER    

atmDs3ConfGroup 1.3.6.1.4.1.2926.25.7.2.1
OBJECT IDENTIFIER    

atmDs3StatsGroup 1.3.6.1.4.1.2926.25.7.2.2
OBJECT IDENTIFIER    

atmDs3ConfPhyTable 1.3.6.1.4.1.2926.25.7.2.1.1
A table of physical layer configuration for the DS3 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmDs3ConfPhyEntry

atmDs3ConfPhyEntry 1.3.6.1.4.1.2926.25.7.2.1.1.1
A entry in the table, containing information about the physical layer of a DS3 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmDs3ConfPhyEntry  

atmDs3ConfPhysIndex 1.3.6.1.4.1.2926.25.7.2.1.1.1.1
The physical interface index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmDs3ConfFraming 1.3.6.1.4.1.2926.25.7.2.1.1.1.2
DS3 or E3 framing selection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER framingDS3(1), framingE3(2)  

atmDs3ConfInsGFCBits 1.3.6.1.4.1.2926.25.7.2.1.1.1.3
Enable/disable the insertion of GFC bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3ConfSerBipolarIO 1.3.6.1.4.1.2926.25.7.2.1.1.1.4
Enable/disable bipolar serial I/O.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3ConfScramblePld 1.3.6.1.4.1.2926.25.7.2.1.1.1.5
Enable/disable payload scrambling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3ConfOverheadPLCP 1.3.6.1.4.1.2926.25.7.2.1.1.1.6
Enable/disable PLCP processing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3ConfGenerateFEBE 1.3.6.1.4.1.2926.25.7.2.1.1.1.7
Enable/disable FEBE generation when F, M, or CP bit errors received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3ConfGenerateFEAC 1.3.6.1.4.1.2926.25.7.2.1.1.1.8
Enable/disable FEAC generation and detection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3ConfLoopback 1.3.6.1.4.1.2926.25.7.2.1.1.1.9
Enable/disable internal loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), internal(2), external(3)  

atmDs3ConfCableLength 1.3.6.1.4.1.2926.25.7.2.1.1.1.10
Configure for the length of the cable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notGreaterThan225Feet(1), greaterThan225Feet(2)  

atmDs3ConfInternalEqualizer 1.3.6.1.4.1.2926.25.7.2.1.1.1.11
Configure to use or bypass the internal equalizer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER use(1), bypass(2)  

atmDs3ConfFillerCells 1.3.6.1.4.1.2926.25.7.2.1.1.1.12
This parameter indicates the type of filler cells to send when there are no data cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unassigned(1), idle(2)  

atmDs3ConfGenerateClock 1.3.6.1.4.1.2926.25.7.2.1.1.1.13
Enable/disable clock generation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmDs3PhyStatsTable 1.3.6.1.4.1.2926.25.7.2.2.1
A table of physical layer statistics information for the DS3 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmDs3PhyStatsEntry

atmDs3PhyStatsEntry 1.3.6.1.4.1.2926.25.7.2.2.1.1
A entry in the table, containing information about the physical layer of a DS3 interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmDs3PhyStatsEntry  

atmDs3PhyStatsPhysIndex 1.3.6.1.4.1.2926.25.7.2.2.1.1.1
The physical interface index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmDs3StatsAlarms 1.3.6.1.4.1.2926.25.7.2.2.1.1.2
Test the PLCP alarm counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsNoSignals 1.3.6.1.4.1.2926.25.7.2.2.1.1.3
No signal error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsNoDs3Frames 1.3.6.1.4.1.2926.25.7.2.2.1.1.4
No DS-3 frame error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsAisDetects 1.3.6.1.4.1.2926.25.7.2.2.1.1.5
AIS detect counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsFrameErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.6
Frame error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsParityErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.7
Parity error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsCpErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.8
CP error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsFeBlockErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.9
Far End Block error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsBpvErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.10
Bipolar Violation error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsRemoteAlarms 1.3.6.1.4.1.2926.25.7.2.2.1.1.11
Bipolar Violation error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmDs3StatsSignalLoss 1.3.6.1.4.1.2926.25.7.2.2.1.1.12
Signal loss indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsOutOfCell 1.3.6.1.4.1.2926.25.7.2.2.1.1.13
ATM out-of-cell delineation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsFifoOverflow 1.3.6.1.4.1.2926.25.7.2.2.1.1.14
ATM FIFO overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsRemoteAlarmInd 1.3.6.1.4.1.2926.25.7.2.2.1.1.15
Remote alarm indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsFrameLoss 1.3.6.1.4.1.2926.25.7.2.2.1.1.16
Frame loss indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsSyncLoss 1.3.6.1.4.1.2926.25.7.2.2.1.1.17
Synchronization loss counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsPlcpAlarmState 1.3.6.1.4.1.2926.25.7.2.2.1.1.18
Test the PLCP alarm state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsAisState 1.3.6.1.4.1.2926.25.7.2.2.1.1.19
AIS detect LED state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmDs3StatsClearCounters 1.3.6.1.4.1.2926.25.7.2.2.1.1.20
Clear all counters in this group ONLY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)