SONET-MIB

File: SONET-MIB.mib (83874 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB PerfHist-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
transmission DisplayString TruthValue
MODULE-COMPLIANCE OBJECT-GROUP ifIndex
PerfCurrentCount PerfIntervalCount

Defined Types

SonetMediumEntry  
SEQUENCE    
  sonetMediumType INTEGER
  sonetMediumTimeElapsed Integer32
  sonetMediumValidIntervals Integer32
  sonetMediumLineCoding INTEGER
  sonetMediumLineType INTEGER
  sonetMediumCircuitIdentifier DisplayString
  sonetMediumInvalidIntervals Integer32
  sonetMediumLoopbackConfig BITS

SonetSectionCurrentEntry  
SEQUENCE    
  sonetSectionCurrentStatus Integer32
  sonetSectionCurrentESs PerfCurrentCount
  sonetSectionCurrentSESs PerfCurrentCount
  sonetSectionCurrentSEFSs PerfCurrentCount
  sonetSectionCurrentCVs PerfCurrentCount

SonetSectionIntervalEntry  
SEQUENCE    
  sonetSectionIntervalNumber Integer32
  sonetSectionIntervalESs PerfIntervalCount
  sonetSectionIntervalSESs PerfIntervalCount
  sonetSectionIntervalSEFSs PerfIntervalCount
  sonetSectionIntervalCVs PerfIntervalCount
  sonetSectionIntervalValidData TruthValue

SonetLineCurrentEntry  
SEQUENCE    
  sonetLineCurrentStatus Integer32
  sonetLineCurrentESs PerfCurrentCount
  sonetLineCurrentSESs PerfCurrentCount
  sonetLineCurrentCVs PerfCurrentCount
  sonetLineCurrentUASs PerfCurrentCount

SonetLineIntervalEntry  
SEQUENCE    
  sonetLineIntervalNumber Integer32
  sonetLineIntervalESs PerfIntervalCount
  sonetLineIntervalSESs PerfIntervalCount
  sonetLineIntervalCVs PerfIntervalCount
  sonetLineIntervalUASs PerfIntervalCount
  sonetLineIntervalValidData TruthValue

SonetFarEndLineCurrentEntry  
SEQUENCE    
  sonetFarEndLineCurrentESs PerfCurrentCount
  sonetFarEndLineCurrentSESs PerfCurrentCount
  sonetFarEndLineCurrentCVs PerfCurrentCount
  sonetFarEndLineCurrentUASs PerfCurrentCount

SonetFarEndLineIntervalEntry  
SEQUENCE    
  sonetFarEndLineIntervalNumber Integer32
  sonetFarEndLineIntervalESs PerfIntervalCount
  sonetFarEndLineIntervalSESs PerfIntervalCount
  sonetFarEndLineIntervalCVs PerfIntervalCount
  sonetFarEndLineIntervalUASs PerfIntervalCount
  sonetFarEndLineIntervalValidData TruthValue

SonetPathCurrentEntry  
SEQUENCE    
  sonetPathCurrentWidth INTEGER
  sonetPathCurrentStatus Integer32
  sonetPathCurrentESs PerfCurrentCount
  sonetPathCurrentSESs PerfCurrentCount
  sonetPathCurrentCVs PerfCurrentCount
  sonetPathCurrentUASs PerfCurrentCount

SonetPathIntervalEntry  
SEQUENCE    
  sonetPathIntervalNumber Integer32
  sonetPathIntervalESs PerfIntervalCount
  sonetPathIntervalSESs PerfIntervalCount
  sonetPathIntervalCVs PerfIntervalCount
  sonetPathIntervalUASs PerfIntervalCount
  sonetPathIntervalValidData TruthValue

SonetFarEndPathCurrentEntry  
SEQUENCE    
  sonetFarEndPathCurrentESs PerfCurrentCount
  sonetFarEndPathCurrentSESs PerfCurrentCount
  sonetFarEndPathCurrentCVs PerfCurrentCount
  sonetFarEndPathCurrentUASs PerfCurrentCount

SonetFarEndPathIntervalEntry  
SEQUENCE    
  sonetFarEndPathIntervalNumber Integer32
  sonetFarEndPathIntervalESs PerfIntervalCount
  sonetFarEndPathIntervalSESs PerfIntervalCount
  sonetFarEndPathIntervalCVs PerfIntervalCount
  sonetFarEndPathIntervalUASs PerfIntervalCount
  sonetFarEndPathIntervalValidData TruthValue

SonetVTCurrentEntry  
SEQUENCE    
  sonetVTCurrentWidth INTEGER
  sonetVTCurrentStatus Integer32
  sonetVTCurrentESs PerfCurrentCount
  sonetVTCurrentSESs PerfCurrentCount
  sonetVTCurrentCVs PerfCurrentCount
  sonetVTCurrentUASs PerfCurrentCount

SonetVTIntervalEntry  
SEQUENCE    
  sonetVTIntervalNumber Integer32
  sonetVTIntervalESs PerfIntervalCount
  sonetVTIntervalSESs PerfIntervalCount
  sonetVTIntervalCVs PerfIntervalCount
  sonetVTIntervalUASs PerfIntervalCount
  sonetVTIntervalValidData TruthValue

SonetFarEndVTCurrentEntry  
SEQUENCE    
  sonetFarEndVTCurrentESs PerfCurrentCount
  sonetFarEndVTCurrentSESs PerfCurrentCount
  sonetFarEndVTCurrentCVs PerfCurrentCount
  sonetFarEndVTCurrentUASs PerfCurrentCount

SonetFarEndVTIntervalEntry  
SEQUENCE    
  sonetFarEndVTIntervalNumber Integer32
  sonetFarEndVTIntervalESs PerfIntervalCount
  sonetFarEndVTIntervalSESs PerfIntervalCount
  sonetFarEndVTIntervalCVs PerfIntervalCount
  sonetFarEndVTIntervalUASs PerfIntervalCount
  sonetFarEndVTIntervalValidData TruthValue

Defined Values

sonetMIB 1.3.6.1.2.1.10.39
The MIB module to describe SONET/SDH interface objects. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3592; see the RFC itself for full legal notices.
MODULE-IDENTITY    

sonetObjects 1.3.6.1.2.1.10.39.1
OBJECT IDENTIFIER    

sonetObjectsPath 1.3.6.1.2.1.10.39.2
OBJECT IDENTIFIER    

sonetObjectsVT 1.3.6.1.2.1.10.39.3
OBJECT IDENTIFIER    

sonetMedium 1.3.6.1.2.1.10.39.1.1
OBJECT IDENTIFIER    

sonetSection 1.3.6.1.2.1.10.39.1.2
OBJECT IDENTIFIER    

sonetLine 1.3.6.1.2.1.10.39.1.3
OBJECT IDENTIFIER    

sonetFarEndLine 1.3.6.1.2.1.10.39.1.4
OBJECT IDENTIFIER    

sonetPath 1.3.6.1.2.1.10.39.2.1
OBJECT IDENTIFIER    

sonetFarEndPath 1.3.6.1.2.1.10.39.2.2
OBJECT IDENTIFIER    

sonetVT 1.3.6.1.2.1.10.39.3.1
OBJECT IDENTIFIER    

sonetFarEndVT 1.3.6.1.2.1.10.39.3.2
OBJECT IDENTIFIER    

sonetMediumTable 1.3.6.1.2.1.10.39.1.1.1
The SONET/SDH Medium table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetMediumEntry

sonetMediumEntry 1.3.6.1.2.1.10.39.1.1.1.1
An entry in the SONET/SDH Medium table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetMediumEntry  

sonetMediumType 1.3.6.1.2.1.10.39.1.1.1.1.1
This variable identifies whether a SONET or a SDH signal is used across this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

sonetMediumTimeElapsed 1.3.6.1.2.1.10.39.1.1.1.1.2
The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..900  

sonetMediumValidIntervals 1.3.6.1.2.1.10.39.1.1.1.1.3
The number of previous 15-minute intervals for which data was collected. A SONET/SDH interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..96  

sonetMediumLineCoding 1.3.6.1.2.1.10.39.1.1.1.1.4
This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zero (NRZ) and the Return to Zero are used for optical SONET/SDH signals.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sonetMediumOther(1), sonetMediumB3ZS(2), sonetMediumCMI(3), sonetMediumNRZ(4), sonetMediumRZ(5)  

sonetMediumLineType 1.3.6.1.2.1.10.39.1.1.1.1.5
This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value sonetOther should be used when the Line Type is not one of the listed values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sonetOther(1), sonetShortSingleMode(2), sonetLongSingleMode(3), sonetMultiMode(4), sonetCoax(5), sonetUTP(6)  

sonetMediumCircuitIdentifier 1.3.6.1.2.1.10.39.1.1.1.1.6
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. Note that the circuit identifier, if available, is also represented by ifPhysAddress.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

sonetMediumInvalidIntervals 1.3.6.1.2.1.10.39.1.1.1.1.7
The number of intervals in the range from 0 to sonetMediumValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..96  

sonetMediumLoopbackConfig 1.3.6.1.2.1.10.39.1.1.1.1.8
The current loopback state of the SONET/SDH interface. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. sonetFacilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. sonetTerminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver. sonetOtherLoop Loopbacks that are not defined here.
Status: current Access: read-write
OBJECT-TYPE    
  BITS sonetNoLoop(0), sonetFacilityLoop(1), sonetTerminalLoop(2), sonetOtherLoop(3)  

sonetSESthresholdSet 1.3.6.1.2.1.10.39.1.1.2
An enumerated integer indicating which recognized set of SES thresholds that the agent uses for determining severely errored seconds and unavailable time. other(1) None of the following. bellcore1991(2) Bellcore TR-NWT-000253, 1991 [TR253], or ANSI T1M1.3/93-005R2, 1993 [T1M1.3]. See also Appendix B. ansi1993(3) ANSI T1.231, 1993 [T1.231a], or Bellcore GR-253-CORE, Issue 2, 1995 [GR253] itu1995(4) ITU Recommendation G.826, 1995 [G.826] ansi1997(5) ANSI T1.231, 1997 [T1.231b] If a manager changes the value of this object then the SES statistics collected prior to this change must be invalidated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), bellcore1991(2), ansi1993(3), itu1995(4), ansi1997(5)  

sonetSectionCurrentTable 1.3.6.1.2.1.10.39.1.2.1
The SONET/SDH Section Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetSectionCurrentEntry

sonetSectionCurrentEntry 1.3.6.1.2.1.10.39.1.2.1.1
An entry in the SONET/SDH Section Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetSectionCurrentEntry  

sonetSectionCurrentStatus 1.3.6.1.2.1.10.39.1.2.1.1.1
This variable indicates the status of the interface. The sonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetSectionNoDefect 2 sonetSectionLOS 4 sonetSectionLOF
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sonetSectionCurrentESs 1.3.6.1.2.1.10.39.1.2.1.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetSectionCurrentSESs 1.3.6.1.2.1.10.39.1.2.1.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetSectionCurrentSEFSs 1.3.6.1.2.1.10.39.1.2.1.1.4
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetSectionCurrentCVs 1.3.6.1.2.1.10.39.1.2.1.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetSectionIntervalTable 1.3.6.1.2.1.10.39.1.2.2
The SONET/SDH Section Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetSectionIntervalEntry

sonetSectionIntervalEntry 1.3.6.1.2.1.10.39.1.2.2.1
An entry in the SONET/SDH Section Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetSectionIntervalEntry  

sonetSectionIntervalNumber 1.3.6.1.2.1.10.39.1.2.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetSectionIntervalESs 1.3.6.1.2.1.10.39.1.2.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetSectionIntervalSESs 1.3.6.1.2.1.10.39.1.2.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetSectionIntervalSEFSs 1.3.6.1.2.1.10.39.1.2.2.1.4
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetSectionIntervalCVs 1.3.6.1.2.1.10.39.1.2.2.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetSectionIntervalValidData 1.3.6.1.2.1.10.39.1.2.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetLineCurrentTable 1.3.6.1.2.1.10.39.1.3.1
The SONET/SDH Line Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetLineCurrentEntry

sonetLineCurrentEntry 1.3.6.1.2.1.10.39.1.3.1.1
An entry in the SONET/SDH Line Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetLineCurrentEntry  

sonetLineCurrentStatus 1.3.6.1.2.1.10.39.1.3.1.1.1
This variable indicates the status of the interface. The sonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetLineNoDefect 2 sonetLineAIS 4 sonetLineRDI
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sonetLineCurrentESs 1.3.6.1.2.1.10.39.1.3.1.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetLineCurrentSESs 1.3.6.1.2.1.10.39.1.3.1.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetLineCurrentCVs 1.3.6.1.2.1.10.39.1.3.1.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetLineCurrentUASs 1.3.6.1.2.1.10.39.1.3.1.1.5
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetLineIntervalTable 1.3.6.1.2.1.10.39.1.3.2
The SONET/SDH Line Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetLineIntervalEntry

sonetLineIntervalEntry 1.3.6.1.2.1.10.39.1.3.2.1
An entry in the SONET/SDH Line Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetLineIntervalEntry  

sonetLineIntervalNumber 1.3.6.1.2.1.10.39.1.3.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetLineIntervalESs 1.3.6.1.2.1.10.39.1.3.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetLineIntervalSESs 1.3.6.1.2.1.10.39.1.3.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetLineIntervalCVs 1.3.6.1.2.1.10.39.1.3.2.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetLineIntervalUASs 1.3.6.1.2.1.10.39.1.3.2.1.5
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetLineIntervalValidData 1.3.6.1.2.1.10.39.1.3.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetFarEndLineCurrentTable 1.3.6.1.2.1.10.39.1.4.1
The SONET/SDH Far End Line Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetFarEndLineCurrentEntry

sonetFarEndLineCurrentEntry 1.3.6.1.2.1.10.39.1.4.1.1
An entry in the SONET/SDH Far End Line Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetFarEndLineCurrentEntry  

sonetFarEndLineCurrentESs 1.3.6.1.2.1.10.39.1.4.1.1.1
The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndLineCurrentSESs 1.3.6.1.2.1.10.39.1.4.1.1.2
The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndLineCurrentCVs 1.3.6.1.2.1.10.39.1.4.1.1.3
The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndLineCurrentUASs 1.3.6.1.2.1.10.39.1.4.1.1.4
The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndLineIntervalTable 1.3.6.1.2.1.10.39.1.4.2
The SONET/SDH Far End Line Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetFarEndLineIntervalEntry

sonetFarEndLineIntervalEntry 1.3.6.1.2.1.10.39.1.4.2.1
An entry in the SONET/SDH Far End Line Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetFarEndLineIntervalEntry  

sonetFarEndLineIntervalNumber 1.3.6.1.2.1.10.39.1.4.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetFarEndLineIntervalESs 1.3.6.1.2.1.10.39.1.4.2.1.2
The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndLineIntervalSESs 1.3.6.1.2.1.10.39.1.4.2.1.3
The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndLineIntervalCVs 1.3.6.1.2.1.10.39.1.4.2.1.4
The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndLineIntervalUASs 1.3.6.1.2.1.10.39.1.4.2.1.5
The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndLineIntervalValidData 1.3.6.1.2.1.10.39.1.4.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetPathCurrentTable 1.3.6.1.2.1.10.39.2.1.1
The SONET/SDH Path Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetPathCurrentEntry

sonetPathCurrentEntry 1.3.6.1.2.1.10.39.2.1.1.1
An entry in the SONET/SDH Path Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetPathCurrentEntry  

sonetPathCurrentWidth 1.3.6.1.2.1.10.39.2.1.1.1.1
A value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, 48, 192 and 768. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, 16, 64 and 256.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sts1(1), sts3cSTM1(2), sts12cSTM4(3), sts24c(4), sts48cSTM16(5), sts192cSTM64(6), sts768cSTM256(7)  

sonetPathCurrentStatus 1.3.6.1.2.1.10.39.2.1.1.1.2
This variable indicates the status of the interface. The sonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetPathNoDefect 2 sonetPathSTSLOP 4 sonetPathSTSAIS 8 sonetPathSTSRDI 16 sonetPathUnequipped 32 sonetPathSignalLabelMismatch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..62  

sonetPathCurrentESs 1.3.6.1.2.1.10.39.2.1.1.1.3
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetPathCurrentSESs 1.3.6.1.2.1.10.39.2.1.1.1.4
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetPathCurrentCVs 1.3.6.1.2.1.10.39.2.1.1.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetPathCurrentUASs 1.3.6.1.2.1.10.39.2.1.1.1.6
The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetPathIntervalTable 1.3.6.1.2.1.10.39.2.1.2
The SONET/SDH Path Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetPathIntervalEntry

sonetPathIntervalEntry 1.3.6.1.2.1.10.39.2.1.2.1
An entry in the SONET/SDH Path Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetPathIntervalEntry  

sonetPathIntervalNumber 1.3.6.1.2.1.10.39.2.1.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetPathIntervalESs 1.3.6.1.2.1.10.39.2.1.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetPathIntervalSESs 1.3.6.1.2.1.10.39.2.1.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetPathIntervalCVs 1.3.6.1.2.1.10.39.2.1.2.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetPathIntervalUASs 1.3.6.1.2.1.10.39.2.1.2.1.5
The counter associated with the number of Unavailable Seconds encountered by a Path in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetPathIntervalValidData 1.3.6.1.2.1.10.39.2.1.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetFarEndPathCurrentTable 1.3.6.1.2.1.10.39.2.2.1
The SONET/SDH Far End Path Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetFarEndPathCurrentEntry

sonetFarEndPathCurrentEntry 1.3.6.1.2.1.10.39.2.2.1.1
An entry in the SONET/SDH Far End Path Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetFarEndPathCurrentEntry  

sonetFarEndPathCurrentESs 1.3.6.1.2.1.10.39.2.2.1.1.1
The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndPathCurrentSESs 1.3.6.1.2.1.10.39.2.2.1.1.2
The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndPathCurrentCVs 1.3.6.1.2.1.10.39.2.2.1.1.3
The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Path interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndPathCurrentUASs 1.3.6.1.2.1.10.39.2.2.1.1.4
The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndPathIntervalTable 1.3.6.1.2.1.10.39.2.2.2
The SONET/SDH Far End Path Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetFarEndPathIntervalEntry

sonetFarEndPathIntervalEntry 1.3.6.1.2.1.10.39.2.2.2.1
An entry in the SONET/SDH Far End Path Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetFarEndPathIntervalEntry  

sonetFarEndPathIntervalNumber 1.3.6.1.2.1.10.39.2.2.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetFarEndPathIntervalESs 1.3.6.1.2.1.10.39.2.2.2.1.2
The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndPathIntervalSESs 1.3.6.1.2.1.10.39.2.2.2.1.3
The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndPathIntervalCVs 1.3.6.1.2.1.10.39.2.2.2.1.4
The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndPathIntervalUASs 1.3.6.1.2.1.10.39.2.2.2.1.5
The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndPathIntervalValidData 1.3.6.1.2.1.10.39.2.2.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetVTCurrentTable 1.3.6.1.2.1.10.39.3.1.1
The SONET/SDH VT Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetVTCurrentEntry

sonetVTCurrentEntry 1.3.6.1.2.1.10.39.3.1.1.1
An entry in the SONET/SDH VT Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetVTCurrentEntry  

sonetVTCurrentWidth 1.3.6.1.2.1.10.39.3.1.1.1.1
A value that indicates the type of the SONET VT and SDH VC. Assigned widths are VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vtWidth15VC11(1), vtWidth2VC12(2), vtWidth3(3), vtWidth6VC2(4), vtWidth6c(5)  

sonetVTCurrentStatus 1.3.6.1.2.1.10.39.3.1.1.1.2
This variable indicates the status of the interface. The sonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The sonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetVTNoDefect 2 sonetVTLOP 4 sonetVTPathAIS 8 sonetVTPathRDI 16 sonetVTPathRFI 32 sonetVTUnequipped 64 sonetVTSignalLabelMismatch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..126  

sonetVTCurrentESs 1.3.6.1.2.1.10.39.3.1.1.1.3
The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetVTCurrentSESs 1.3.6.1.2.1.10.39.3.1.1.1.4
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetVTCurrentCVs 1.3.6.1.2.1.10.39.3.1.1.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetVTCurrentUASs 1.3.6.1.2.1.10.39.3.1.1.1.6
The counter associated with the number of Unavailable Seconds encountered by a VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetVTIntervalTable 1.3.6.1.2.1.10.39.3.1.2
The SONET/SDH VT Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetVTIntervalEntry

sonetVTIntervalEntry 1.3.6.1.2.1.10.39.3.1.2.1
An entry in the SONET/SDH VT Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetVTIntervalEntry  

sonetVTIntervalNumber 1.3.6.1.2.1.10.39.3.1.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetVTIntervalESs 1.3.6.1.2.1.10.39.3.1.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetVTIntervalSESs 1.3.6.1.2.1.10.39.3.1.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetVTIntervalCVs 1.3.6.1.2.1.10.39.3.1.2.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetVTIntervalUASs 1.3.6.1.2.1.10.39.3.1.2.1.5
The counter associated with the number of Unavailable Seconds encountered by a VT in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetVTIntervalValidData 1.3.6.1.2.1.10.39.3.1.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetFarEndVTCurrentTable 1.3.6.1.2.1.10.39.3.2.1
The SONET/SDH Far End VT Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetFarEndVTCurrentEntry

sonetFarEndVTCurrentEntry 1.3.6.1.2.1.10.39.3.2.1.1
An entry in the SONET/SDH Far End VT Current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetFarEndVTCurrentEntry  

sonetFarEndVTCurrentESs 1.3.6.1.2.1.10.39.3.2.1.1.1
The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndVTCurrentSESs 1.3.6.1.2.1.10.39.3.2.1.1.2
The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH VT interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndVTCurrentCVs 1.3.6.1.2.1.10.39.3.2.1.1.3
The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH VT interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndVTCurrentUASs 1.3.6.1.2.1.10.39.3.2.1.1.4
The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH VT interface in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

sonetFarEndVTIntervalTable 1.3.6.1.2.1.10.39.3.2.2
The SONET/SDH Far End VT Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SonetFarEndVTIntervalEntry

sonetFarEndVTIntervalEntry 1.3.6.1.2.1.10.39.3.2.2.1
An entry in the SONET/SDH Far End VT Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SonetFarEndVTIntervalEntry  

sonetFarEndVTIntervalNumber 1.3.6.1.2.1.10.39.3.2.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

sonetFarEndVTIntervalESs 1.3.6.1.2.1.10.39.3.2.2.1.2
The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndVTIntervalSESs 1.3.6.1.2.1.10.39.3.2.2.1.3
The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndVTIntervalCVs 1.3.6.1.2.1.10.39.3.2.2.1.4
The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndVTIntervalUASs 1.3.6.1.2.1.10.39.3.2.2.1.5
The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

sonetFarEndVTIntervalValidData 1.3.6.1.2.1.10.39.3.2.2.1.6
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sonetConformance 1.3.6.1.2.1.10.39.4
OBJECT IDENTIFIER    

sonetGroups 1.3.6.1.2.1.10.39.4.1
OBJECT IDENTIFIER    

sonetCompliances 1.3.6.1.2.1.10.39.4.2
OBJECT IDENTIFIER    

sonetCompliance 1.3.6.1.2.1.10.39.4.2.1
The compliance statement for SONET/SDH interfaces.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

sonetCompliance2 1.3.6.1.2.1.10.39.4.2.2
The compliance statement for SONET/SDH interfaces.
Status: current Access: read-only
MODULE-COMPLIANCE    

sonetMediumStuff 1.3.6.1.2.1.10.39.4.1.1
A collection of objects providing configuration information applicable to all SONET/SDH interfaces.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetSectionStuff 1.3.6.1.2.1.10.39.4.1.2
A collection of objects providing information specific to SONET/SDH Section interfaces.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetLineStuff 1.3.6.1.2.1.10.39.4.1.3
A collection of objects providing information specific to SONET/SDH Line interfaces.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetFarEndLineStuff 1.3.6.1.2.1.10.39.4.1.4
A collection of objects providing information specific to SONET/SDH Line interfaces, and maintaining Line Far End information.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetPathStuff 1.3.6.1.2.1.10.39.4.1.5
A collection of objects providing information specific to SONET/SDH Path interfaces.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetFarEndPathStuff 1.3.6.1.2.1.10.39.4.1.6
A collection of objects providing information specific to SONET/SDH Path interfaces, and maintaining Path Far End information.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetVTStuff 1.3.6.1.2.1.10.39.4.1.7
A collection of objects providing information specific to SONET/SDH VT interfaces.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetFarEndVTStuff 1.3.6.1.2.1.10.39.4.1.8
A collection of objects providing information specific to SONET/SDH VT interfaces, and maintaining VT Far End information.
Status: deprecated Access: read-only
OBJECT-GROUP    

sonetMediumStuff2 1.3.6.1.2.1.10.39.4.1.9
A collection of objects providing configuration information applicable to all SONET/SDH interfaces.
Status: current Access: read-only
OBJECT-GROUP    

sonetSectionStuff2 1.3.6.1.2.1.10.39.4.1.10
A collection of objects providing information specific to SONET/SDH Section interfaces.
Status: current Access: read-only
OBJECT-GROUP    

sonetLineStuff2 1.3.6.1.2.1.10.39.4.1.11
A collection of objects providing information specific to SONET/SDH Line interfaces.
Status: current Access: read-only
OBJECT-GROUP    

sonetPathStuff2 1.3.6.1.2.1.10.39.4.1.12
A collection of objects providing information specific to SONET/SDH Path interfaces.
Status: current Access: read-only
OBJECT-GROUP    

sonetVTStuff2 1.3.6.1.2.1.10.39.4.1.13
A collection of objects providing information specific to SONET/SDH VT interfaces.
Status: current Access: read-only
OBJECT-GROUP    

sonetFarEndLineStuff2 1.3.6.1.2.1.10.39.4.1.14
A collection of objects providing information specific to SONET/SDH Line interfaces, and maintaining Line Far End information.
Status: current Access: read-only
OBJECT-GROUP    

sonetFarEndPathStuff2 1.3.6.1.2.1.10.39.4.1.15
A collection of objects providing information specific to SONET/SDH Path interfaces, and maintaining Path Far End information.
Status: current Access: read-only
OBJECT-GROUP    

sonetFarEndVTStuff2 1.3.6.1.2.1.10.39.4.1.16
A collection of objects providing information specific to SONET/SDH VT interfaces, and maintaining VT Far End information.
Status: current Access: read-only
OBJECT-GROUP