SOCOMECUPS-MIB-v2

File: SOCOMECUPS-MIB-v2.mib (145800 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

IpAddress enterprises OBJECT-TYPE
DisplayString TRAP-TYPE

Defined Types

IpduAgentTrapsReceiversEntry  
SEQUENCE    
  trapsIndex INTEGER
  trapsReceiverAddr IpAddress
  receiverCommunityString DisplayString
  receiverNmsType INTEGER
  receiverSeverityLevel INTEGER
  receiverDescription DisplayString

IpduAgentAccessControlEntry  
SEQUENCE    
  accessIndex INTEGER
  accessControlAddr IpAddress
  accessControlMode INTEGER

IpduDeviceInletConfigEntry  
SEQUENCE    
  inletConfigIndex INTEGER
  inletConfigDesc DisplayString
  inletConfigVoltageHigh INTEGER
  inletConfigVoltageHighAction INTEGER
  inletConfigVoltageLow INTEGER
  inletConfigVoltageLowAction INTEGER
  inletConfigCurrentHigh INTEGER
  inletConfigCurrentHighAction INTEGER
  inletConfigFrequencyHigh INTEGER
  inletConfigfrequencyHighAction INTEGER
  inletConfigFrequencyLow INTEGER
  inletConfigfrequencyLowAction INTEGER

IpduDeviceInletStatusEntry  
SEQUENCE    
  inletStatusIndex INTEGER
  inletStatusVoltage INTEGER
  inletStatusCurrent INTEGER
  inletStatusFrequency INTEGER
  inletStatusKwatt INTEGER
  inletStatusWH INTEGER

IpduDeviceOutletConfigEntry  
SEQUENCE    
  outletConfigIndex INTEGER
  outletConfigDesc DisplayString
  outletConfigLocation DisplayString
  outletConfigOnDelay INTEGER
  outletConfigOffDelay INTEGER
  outletConfigCurrentHigh INTEGER
  outletConfigCurrentHighAction INTEGER

IpduDeviceOutletStatusEntry  
SEQUENCE    
  outletStatusIndex INTEGER
  outletStatusStatus INTEGER
  outletStatusCurrent INTEGER
  outletStatusKwatt INTEGER
  outletStatusWH INTEGER
  outletStatusStateTime INTEGER
  outletStatusTimeToGo INTEGER

IpduDeviceOutletControlEntry  
SEQUENCE    
  outletControlIndex INTEGER
  outletControlControl INTEGER

IpduDeviceCcOutConfigEntry  
SEQUENCE    
  ccOutConfigIndex INTEGER
  ccOutConfigDesc DisplayString
  ccOutConfigEventAction INTEGER
  ccOutConfigCloseDelay INTEGER
  ccOutConfigOpenDelay INTEGER

IpduDeviceCcOutStatusEntry  
SEQUENCE    
  ccOutStatusIndex INTEGER
  ccOutStatusStatus INTEGER
  ccOutStatusTimeOnState INTEGER

IpduDeviceCcOutControlEntry  
SEQUENCE    
  ccOutControlIndex INTEGER
  ccOutControlControl INTEGER

IpduSlaveStateEntry  
SEQUENCE    
  slaveStateIndex INTEGER
  slaveStateControl01 INTEGER

IpduDeviceSlaveInletStatusEntry  
SEQUENCE    
  inletSlaveStatusIndex INTEGER
  inletSlaveStatusVoltage INTEGER
  inletSlaveStatusCurrent INTEGER
  inletSlaveStatusFrequency INTEGER
  inletSlaveStatusKwatt INTEGER
  inletSlaveStatusWH INTEGER
  inletSlaveStatusVoltage2 INTEGER
  inletSlaveStatusCurrent2 INTEGER
  inletSlaveStatusFrequency2 INTEGER
  inletSlaveStatusKwatt2 INTEGER
  inletSlaveStatusWH2 INTEGER

IpduDeviceslaveInletConfigEntry  
SEQUENCE    
  slaveInletConfigIndex INTEGER
  slaveInletConfigVoltageHigh INTEGER
  slaveInletConfigVoltageLow INTEGER
  slaveInlet2ConfigVoltageHigh INTEGER
  slaveInlet2ConfigVoltageLow INTEGER

IpduSlaveDeviceOutletNameEntry  
SEQUENCE    
  slaveOutletNameIndex INTEGER
  slaveOutletName01 DisplayString
  slaveOutletName02 DisplayString
  slaveOutletName03 DisplayString
  slaveOutletName04 DisplayString
  slaveOutletName05 DisplayString
  slaveOutletName06 DisplayString
  slaveOutletName07 DisplayString
  slaveOutletName08 DisplayString
  slaveOutletName09 DisplayString
  slaveOutletName10 DisplayString
  slaveOutletName11 DisplayString
  slaveOutletName12 DisplayString

IpduSlaveDeviceOutletLocationEntry  
SEQUENCE    
  slaveOutletLocationIndex INTEGER
  slaveOutletLocation01 DisplayString
  slaveOutletLocation02 DisplayString
  slaveOutletLocation03 DisplayString
  slaveOutletLocation04 DisplayString
  slaveOutletLocation05 DisplayString
  slaveOutletLocation06 DisplayString
  slaveOutletLocation07 DisplayString
  slaveOutletLocation08 DisplayString
  slaveOutletLocation09 DisplayString
  slaveOutletLocation10 DisplayString
  slaveOutletLocation11 DisplayString
  slaveOutletLocation12 DisplayString

IpduSlaveDeviceOutletOnTimeEntry  
SEQUENCE    
  slaveOutletOnTimeIndex INTEGER
  slaveOutletOnTime01 INTEGER
  slaveOutletOnTime02 INTEGER
  slaveOutletOnTime03 INTEGER
  slaveOutletOnTime04 INTEGER
  slaveOutletOnTime05 INTEGER
  slaveOutletOnTime06 INTEGER
  slaveOutletOnTime07 INTEGER
  slaveOutletOnTime08 INTEGER
  slaveOutletOnTime09 INTEGER
  slaveOutletOnTime10 INTEGER
  slaveOutletOnTime11 INTEGER
  slaveOutletOnTime12 INTEGER

IpduSlaveDeviceOutletOffTimeEntry  
SEQUENCE    
  slaveOutletOffTimeIndex INTEGER
  slaveOutletOffTime01 INTEGER
  slaveOutletOffTime02 INTEGER
  slaveOutletOffTime03 INTEGER
  slaveOutletOffTime04 INTEGER
  slaveOutletOffTime05 INTEGER
  slaveOutletOffTime06 INTEGER
  slaveOutletOffTime07 INTEGER
  slaveOutletOffTime08 INTEGER
  slaveOutletOffTime09 INTEGER
  slaveOutletOffTime10 INTEGER
  slaveOutletOffTime11 INTEGER
  slaveOutletOffTime12 INTEGER

IpduSlaveDeviceOutletCurrThEntry  
SEQUENCE    
  slaveOutletCurrThIndex INTEGER
  slaveOutletCurrTh01 INTEGER
  slaveOutletCurrTh02 INTEGER
  slaveOutletCurrTh03 INTEGER
  slaveOutletCurrTh04 INTEGER
  slaveOutletCurrTh05 INTEGER
  slaveOutletCurrTh06 INTEGER
  slaveOutletCurrTh07 INTEGER
  slaveOutletCurrTh08 INTEGER
  slaveOutletCurrTh09 INTEGER
  slaveOutletCurrTh10 INTEGER
  slaveOutletCurrTh11 INTEGER
  slaveOutletCurrTh12 INTEGER

IpduSlaveDeviceOutletCurrentEntry  
SEQUENCE    
  slaveOutletCurrentIndex INTEGER
  slaveOutletCurrent01 INTEGER
  slaveOutletCurrent02 INTEGER
  slaveOutletCurrent03 INTEGER
  slaveOutletCurrent04 INTEGER
  slaveOutletCurrent05 INTEGER
  slaveOutletCurrent06 INTEGER
  slaveOutletCurrent07 INTEGER
  slaveOutletCurrent08 INTEGER
  slaveOutletCurrent09 INTEGER
  slaveOutletCurrent10 INTEGER
  slaveOutletCurrent11 INTEGER
  slaveOutletCurrent12 INTEGER

IpduSlaveDeviceOutletWattEntry  
SEQUENCE    
  slaveOutletWattIndex INTEGER
  slaveOutletWatt01 INTEGER
  slaveOutletWatt02 INTEGER
  slaveOutletWatt03 INTEGER
  slaveOutletWatt04 INTEGER
  slaveOutletWatt05 INTEGER
  slaveOutletWatt06 INTEGER
  slaveOutletWatt07 INTEGER
  slaveOutletWatt08 INTEGER
  slaveOutletWatt09 INTEGER
  slaveOutletWatt10 INTEGER
  slaveOutletWatt11 INTEGER
  slaveOutletWatt12 INTEGER

IpduSlaveDeviceOutletKwattEntry  
SEQUENCE    
  slaveOutletKwattIndex INTEGER
  slaveOutletKwatt01 INTEGER
  slaveOutletKwatt02 INTEGER
  slaveOutletKwatt03 INTEGER
  slaveOutletKwatt04 INTEGER
  slaveOutletKwatt05 INTEGER
  slaveOutletKwatt06 INTEGER
  slaveOutletKwatt07 INTEGER
  slaveOutletKwatt08 INTEGER
  slaveOutletKwatt09 INTEGER
  slaveOutletKwatt10 INTEGER
  slaveOutletKwatt11 INTEGER
  slaveOutletKwatt12 INTEGER

IpduSlaveDeviceOutletActionEntry  
SEQUENCE    
  slaveOutletActionIndex INTEGER
  slaveOutletAction01 INTEGER
  slaveOutletAction02 INTEGER
  slaveOutletAction03 INTEGER
  slaveOutletAction04 INTEGER
  slaveOutletAction05 INTEGER
  slaveOutletAction06 INTEGER
  slaveOutletAction07 INTEGER
  slaveOutletAction08 INTEGER
  slaveOutletAction09 INTEGER
  slaveOutletAction10 INTEGER
  slaveOutletAction11 INTEGER
  slaveOutletAction12 INTEGER

Defined Values

socomecSicon 1.3.6.1.4.1.4555
OBJECT IDENTIFIER    

product 1.3.6.1.4.1.4555.1
OBJECT IDENTIFIER    

pduAgent 1.3.6.1.4.1.4555.1.1
OBJECT IDENTIFIER    

iPDU 1.3.6.1.4.1.4555.1.1.20
OBJECT IDENTIFIER    

ipduObjects 1.3.6.1.4.1.4555.1.1.20.1
OBJECT IDENTIFIER    

ipduTraps 1.3.6.1.4.1.4555.1.1.20.2
OBJECT IDENTIFIER    

ipduIdent 1.3.6.1.4.1.4555.1.1.20.1.1
OBJECT IDENTIFIER    

ipduAgent 1.3.6.1.4.1.4555.1.1.20.1.2
OBJECT IDENTIFIER    

ipduDevice 1.3.6.1.4.1.4555.1.1.20.1.3
OBJECT IDENTIFIER    

ipduSlave 1.3.6.1.4.1.4555.1.1.20.1.4
OBJECT IDENTIFIER    

ipduEnv 1.3.6.1.4.1.4555.1.1.20.1.5
OBJECT IDENTIFIER    

ipduIdentManufacturer 1.3.6.1.4.1.4555.1.1.20.1.1.1
The name of manufacturer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduIdentModel 1.3.6.1.4.1.4555.1.1.20.1.1.2
The Model designation of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduIdentAgentSoftwareVersion 1.3.6.1.4.1.4555.1.1.20.1.1.3
The firmware version of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

ipduIdentName 1.3.6.1.4.1.4555.1.1.20.1.1.4
A description of this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduAgentConfig 1.3.6.1.4.1.4555.1.1.20.1.2.1
OBJECT IDENTIFIER    

ipduAgentMibVersion 1.3.6.1.4.1.4555.1.1.20.1.2.1.1
The Mib Version implemented on this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

ipduAgentTime 1.3.6.1.4.1.4555.1.1.20.1.2.2
OBJECT IDENTIFIER    

ipduAgentTimeDate 1.3.6.1.4.1.4555.1.1.20.1.2.2.1
The date in agent, format is (dd/mm/yyyy)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(10..10)  

ipduAgentTimeTime 1.3.6.1.4.1.4555.1.1.20.1.2.2.2
The time in agent, format is (hh:mm:ss)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(8..8)  

ipduAgentTimerFromNtp 1.3.6.1.4.1.4555.1.1.20.1.2.2.3
Enable or disable the agent to synchronize date/time with NTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentNtpIpAddress 1.3.6.1.4.1.4555.1.1.20.1.2.2.4
The ip address of NTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipduAgentNtpTimeZone 1.3.6.1.4.1.4555.1.1.20.1.2.2.5
Time Zone to use when synchronize with NTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER gMT-1200(1), gMT-1100(2), gMT-1000(3), gMT-0900(4), gMT-0800(5), gMT-0700(6), gMT-0600(7), gMT-0500(8), gMT-0400(9), gMT-0330(10), gMT-0300(11), gMT-0200(12), gMT-0100(13), gMT-0000(14), gMT0100(15), gMT0200(16), gMT0300(17), gMT0330(18), gMT0400(19), gMT0500(20), gMT0530(21), gMT0600(22), gMT0700(23), gMT0800(24), gMT0900(25), gMT1000(26), gMT1100(27), gMT1200(28)  

ipduAgentDayLightSaving 1.3.6.1.4.1.4555.1.1.20.1.2.2.6
Enable/disable the Day Light Saving when synchronize with NTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentNetwork 1.3.6.1.4.1.4555.1.1.20.1.2.3
OBJECT IDENTIFIER    

ipduAgentNetworkIp 1.3.6.1.4.1.4555.1.1.20.1.2.3.1
OBJECT IDENTIFIER    

ipduAgentNetworkIpAdress 1.3.6.1.4.1.4555.1.1.20.1.2.3.1.1
The ip address that NMS can identify the managed device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipduAgentNetworkIpGateway 1.3.6.1.4.1.4555.1.1.20.1.2.3.1.2
The default gateway that allow device managed through routers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipduAgentNetworkIpSubnet 1.3.6.1.4.1.4555.1.1.20.1.2.3.1.3
Internet address subnet mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipduAgentNetworkDhcpControl 1.3.6.1.4.1.4555.1.1.20.1.2.3.2
Enable/disable DHCP protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentNetworkPingControl 1.3.6.1.4.1.4555.1.1.20.1.2.3.3
Enable/disable to response to PING request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentNetworkTftpControl 1.3.6.1.4.1.4555.1.1.20.1.2.3.4
Enable/disable TFTP protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentNetworkTelnet 1.3.6.1.4.1.4555.1.1.20.1.2.3.5
OBJECT IDENTIFIER    

ipduAgentTelnetControl 1.3.6.1.4.1.4555.1.1.20.1.2.3.5.1
Enable/disable Telnet protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentTelnetPort 1.3.6.1.4.1.4555.1.1.20.1.2.3.5.2
The TCP port for telnet
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduAgentNetworkHttp 1.3.6.1.4.1.4555.1.1.20.1.2.3.6
OBJECT IDENTIFIER    

ipduAgentHttpControl 1.3.6.1.4.1.4555.1.1.20.1.2.3.6.1
Enable/disable HTTP protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentHttpPort 1.3.6.1.4.1.4555.1.1.20.1.2.3.6.2
The TCP port for HTTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduAgentNetworkSnmp 1.3.6.1.4.1.4555.1.1.20.1.2.3.7
OBJECT IDENTIFIER    

ipduAgentSnmpControl 1.3.6.1.4.1.4555.1.1.20.1.2.3.7.1
Enable/disable SNMP protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduAgentSnmpPort 1.3.6.1.4.1.4555.1.1.20.1.2.3.7.2
The UDP port for SNMP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduAgentLog 1.3.6.1.4.1.4555.1.1.20.1.2.1.4
OBJECT IDENTIFIER    

pduAgentDataLogInterval 1.3.6.1.4.1.4555.1.1.20.1.2.1.4.1
The interval of the updation of the data log. The value is in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 60..28800  

ipduAgentControl 1.3.6.1.4.1.4555.1.1.20.1.2.1.5
OBJECT IDENTIFIER    

ipduAgentControlDefault 1.3.6.1.4.1.4555.1.1.20.1.2.1.5.1
Reset all parameters of the agent to default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), nothing(2)  

ipduAgentControlRestart 1.3.6.1.4.1.4555.1.1.20.1.2.1.5.2
Restart the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER restart(1), nothing(2)  

ipduAgentTrap 1.3.6.1.4.1.4555.1.1.20.1.2.1.6
OBJECT IDENTIFIER    

ipduAgentTrapRetryCount 1.3.6.1.4.1.4555.1.1.20.1.2.1.6.1
The count of repeat traps send to NMS before trap acknowledgement received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduAgentTrapRetryTime 1.3.6.1.4.1.4555.1.1.20.1.2.1.6.2
The time interval in seconds between retry traps sned to NMS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduAgentTrapAckSignature 1.3.6.1.4.1.4555.1.1.20.1.2.1.6.3
The signature of trap acknowledgement.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduAgentTrapsReceiversTable 1.3.6.1.4.1.4555.1.1.20.1.2.1.7
A list of managers to send traps to. The number of entries is given by the value of agentConfigNumTrapReceivers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduAgentTrapsReceiversEntry

ipduAgentTrapsReceiversEntry 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1
The managers to send traps to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduAgentTrapsReceiversEntry  

trapsIndex 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1.1
The index to a trap receiver entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

trapsReceiverAddr 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1.2
The IP address of the manager to send a trap to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

receiverCommunityString 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1.3
The community name to use in the trap when sent to the manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

receiverNmsType 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1.4
The trap group that NMS desired.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), iPDU-trap(2)  

receiverSeverityLevel 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1.5
The severity level of traps to be received by this manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER informational(1), warning(2), severe(3)  

receiverDescription 1.3.6.1.4.1.4555.1.1.20.1.2.1.7.1.6
Description of trap receivers
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduAgentAccessControlTable 1.3.6.1.4.1.4555.1.1.20.1.2.1.8
A list of managers which can access the device with private community string.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduAgentAccessControlEntry

ipduAgentAccessControlEntry 1.3.6.1.4.1.4555.1.1.20.1.2.1.8.1
The managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduAgentAccessControlEntry  

accessIndex 1.3.6.1.4.1.4555.1.1.20.1.2.1.8.1.1
The index to a access control entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

accessControlAddr 1.3.6.1.4.1.4555.1.1.20.1.2.1.8.1.2
The IP address of the manager to access the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

accessControlMode 1.3.6.1.4.1.4555.1.1.20.1.2.1.8.1.3
Access type, only read/Write access type can change parameter of the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER permitted(1), denied(2)  

ipduDeviceInlet 1.3.6.1.4.1.4555.1.1.20.1.3.1
OBJECT IDENTIFIER    

ipduDeviceInletNumber 1.3.6.1.4.1.4555.1.1.20.1.3.1.1
The inlet number on this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduDeviceInletConfigTable 1.3.6.1.4.1.4555.1.1.20.1.3.1.2
A list of inlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceInletConfigEntry

ipduDeviceInletConfigEntry 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1
The inlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceInletConfigEntry  

inletConfigIndex 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.1
The index to a access inlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

inletConfigDesc 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.2
A Description of inlet of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

inletConfigVoltageHigh 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.3
The Inlet high voltage threshold, in volts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigVoltageHighAction 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.4
Reaction of the device when inlet voltage higher than set point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigVoltageLow 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.5
The Inlet low voltage threshold, in volts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigVoltageLowAction 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.6
Reaction of the device when inlet voltage lower than set point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigCurrentHigh 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.7
The Inlet low voltage threshold, in 0.1 amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..160  

inletConfigCurrentHighAction 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.8
Reaction of the device when inlet current higher than set point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigFrequencyHigh 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.9
The Inlet high frequency threshold, in hz.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigfrequencyHighAction 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.10
Reaction of the device when inlet frequency higher than set point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigFrequencyLow 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.11
The Inlet low frequency threshold, in hz.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigfrequencyLowAction 1.3.6.1.4.1.4555.1.1.20.1.3.1.2.1.12
Reaction of the device when inlet frequency lower than set point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

ipduDeviceInletStatusTable 1.3.6.1.4.1.4555.1.1.20.1.3.1.3
A list of inlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceInletStatusEntry

ipduDeviceInletStatusEntry 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1
The inlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceInletStatusEntry  

inletStatusIndex 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1.1
The index to a access inlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

inletStatusVoltage 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1.2
The Inlet Voltage in 0.1 volts
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletStatusCurrent 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1.3
The Inlet Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

inletStatusFrequency 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1.4
The Inlet Frequency in 0.1 Hz
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletStatusKwatt 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1.5
The Inlet Kwatt in 0.1 KW/H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

inletStatusWH 1.3.6.1.4.1.4555.1.1.20.1.3.1.3.1.6
The Inlet Kwatt in 0.1 W/H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletWattReset 1.3.6.1.4.1.4555.1.1.20.1.3.1.4
Reset inlet kw.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), inlet1(2), inlet2(3)  

ipduDeviceOutlet 1.3.6.1.4.1.4555.1.1.20.1.3.2
OBJECT IDENTIFIER    

ipduDeviceOutletNumber 1.3.6.1.4.1.4555.1.1.20.1.3.2.1
The outlet number on this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduDeviceOutletConfigTable 1.3.6.1.4.1.4555.1.1.20.1.3.2.2
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceOutletConfigEntry

ipduDeviceOutletConfigEntry 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1
The inlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceOutletConfigEntry  

outletConfigIndex 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.1
The index to a access inlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outletConfigDesc 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.2
A Description of outlet of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

outletConfigLocation 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.3
Location of device connectted to this outlet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

outletConfigOnDelay 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.4
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

outletConfigOffDelay 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.5
The delay time before turn off tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

outletConfigCurrentHigh 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.6
The outlet high current threshold, in amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

outletConfigCurrentHighAction 1.3.6.1.4.1.4555.1.1.20.1.3.2.2.1.7
Reaction of the device when outlet current higher than set point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletOff(1), nothing(2)  

ipduDeviceOutletStatusTable 1.3.6.1.4.1.4555.1.1.20.1.3.2.3
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceOutletStatusEntry

ipduDeviceOutletStatusEntry 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceOutletStatusEntry  

outletStatusIndex 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

outletStatusStatus 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.2
Outlet state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknow(1), outletOff(2), outletOn(3), outletOffToOn(4), outletOnToOff(5), outletCycling(6)  

outletStatusCurrent 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.3
The outlet Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

outletStatusKwatt 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.4
The outlet Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

outletStatusWH 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.5
The outlet Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

outletStatusStateTime 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.6
Time in seconds since the outlet changed to current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outletStatusTimeToGo 1.3.6.1.4.1.4555.1.1.20.1.3.2.3.1.7
Remain time the outlet state will be changed by agent, in seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduDeviceOutletControlTable 1.3.6.1.4.1.4555.1.1.20.1.3.2.4
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceOutletControlEntry

ipduDeviceOutletControlEntry 1.3.6.1.4.1.4555.1.1.20.1.3.2.4.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceOutletControlEntry  

outletControlIndex 1.3.6.1.4.1.4555.1.1.20.1.3.2.4.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

outletControlControl 1.3.6.1.4.1.4555.1.1.20.1.3.2.4.1.2
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

ipduDeviceOutletControlAll 1.3.6.1.4.1.4555.1.1.20.1.3.2.5
Set to control all outlets perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimers(6), offByActionTimers(7), cycleByActionTimers(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

ipduDeviceOutletWattReset 1.3.6.1.4.1.4555.1.1.20.1.3.2.6
Reset outlet kw.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), outleta(2), outletb(3), outletc(4), outletd(5), outlete(6), outletf(7), outletg(8), outleth(9), outleti(10), outletj(11), outletk(12), outletl(13)  

ipduDeviceCcOut 1.3.6.1.4.1.4555.1.1.20.1.3.3
OBJECT IDENTIFIER    

ipduDeviceCcOutNumber 1.3.6.1.4.1.4555.1.1.20.1.3.3.1
The contact closure output number on this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduDeviceCcOutConfigTable 1.3.6.1.4.1.4555.1.1.20.1.3.3.2
A list of contact closure output on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceCcOutConfigEntry

ipduDeviceCcOutConfigEntry 1.3.6.1.4.1.4555.1.1.20.1.3.3.2.1
The CC number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceCcOutConfigEntry  

ccOutConfigIndex 1.3.6.1.4.1.4555.1.1.20.1.3.3.2.1.1
The index to access contact closure output configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ccOutConfigDesc 1.3.6.1.4.1.4555.1.1.20.1.3.3.2.1.2
A Description of a contact closure output of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ccOutConfigEventAction 1.3.6.1.4.1.4555.1.1.20.1.3.3.2.1.3
Enable/disble the contact closure output to react to events.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ccOutConfigCloseDelay 1.3.6.1.4.1.4555.1.1.20.1.3.3.2.1.4
The delay time in seconds when the contact closure output set to close.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ccOutConfigOpenDelay 1.3.6.1.4.1.4555.1.1.20.1.3.3.2.1.5
The delay time in seconds when the contact closure output set to open.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduDeviceCcOutStatusTable 1.3.6.1.4.1.4555.1.1.20.1.3.3.3
A list of contact closure output on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceCcOutStatusEntry

ipduDeviceCcOutStatusEntry 1.3.6.1.4.1.4555.1.1.20.1.3.3.3.1
The CC number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceCcOutStatusEntry  

ccOutStatusIndex 1.3.6.1.4.1.4555.1.1.20.1.3.3.3.1.1
The index to access contact closure output configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ccOutStatusStatus 1.3.6.1.4.1.4555.1.1.20.1.3.3.3.1.2
State of a contact closure output of device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER closed(1), open(2)  

ccOutStatusTimeOnState 1.3.6.1.4.1.4555.1.1.20.1.3.3.3.1.3
Time in seconds since the contact closure output changed to current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduDeviceCcOutControlTable 1.3.6.1.4.1.4555.1.1.20.1.3.3.4
A list of contact closure output on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceCcOutControlEntry

ipduDeviceCcOutControlEntry 1.3.6.1.4.1.4555.1.1.20.1.3.3.4.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceCcOutControlEntry  

ccOutControlIndex 1.3.6.1.4.1.4555.1.1.20.1.3.3.4.1.1
The index to a access contact closure output configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ccOutControlControl 1.3.6.1.4.1.4555.1.1.20.1.3.3.4.1.2
Set to control the contact closure output perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), closeImmediately(3), openImmediately(4), cycleImmediately(5), closeByCloseTimer(6), openByOpenTimer(7), cycleByActionTimer(8), closeThenOpenByActionTimers(9), openThenCloseByActionTimers(10)  

ipduSlaveState 1.3.6.1.4.1.4555.1.1.20.1.4.1
OBJECT IDENTIFIER    

ipduSlaveStateTable 1.3.6.1.4.1.4555.1.1.20.1.4.1.1
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveStateEntry

ipduSlaveStateEntry 1.3.6.1.4.1.4555.1.1.20.1.4.1.1.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveStateEntry  

slaveStateIndex 1.3.6.1.4.1.4555.1.1.20.1.4.1.1.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveStateControl01 1.3.6.1.4.1.4555.1.1.20.1.4.1.1.1.2
Set to control the outlet perform action as requested to slave outlet A
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disconnected(1), connected(2)  

ipduSlaveInlet 1.3.6.1.4.1.4555.1.1.20.1.4.2
OBJECT IDENTIFIER    

ipduSlaveInletStatus 1.3.6.1.4.1.4555.1.1.20.1.4.2.1
OBJECT IDENTIFIER    

ipduDeviceSlaveInletStatusTable 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1
A list of inlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceSlaveInletStatusEntry

ipduDeviceSlaveInletStatusEntry 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1
The inlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceSlaveInletStatusEntry  

inletSlaveStatusIndex 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.1
The index to a access inlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

inletSlaveStatusVoltage 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.2
The Inlet Voltage in 0.1 volts
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusCurrent 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.3
The Inlet Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusFrequency 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.4
The Inlet Frequency in 0.1 Hz
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusKwatt 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.5
The Inlet Kwatt in 0.001 KW/H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusWH 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.6
The Inlet Kwatt in 0.001 KW/H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusVoltage2 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.7
The Inlet Voltage in 0.1 volts
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusCurrent2 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.8
The Inlet Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusFrequency2 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.9
The Inlet Frequency in 0.1 Hz
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusKwatt2 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.10
The Inlet Kwatt in 0.001 KW/H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusWH2 1.3.6.1.4.1.4555.1.1.20.1.4.2.1.1.1.11
The Inlet Kwatt in 0.001 KW/H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65500  

ipduSlaveInletConfig 1.3.6.1.4.1.4555.1.1.20.1.4.2.2
OBJECT IDENTIFIER    

ipduDeviceslaveInletConfigTable 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1
A list of inlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduDeviceslaveInletConfigEntry

ipduDeviceslaveInletConfigEntry 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1.1
The inlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduDeviceslaveInletConfigEntry  

slaveInletConfigIndex 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1.1.1
The index to a access inlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveInletConfigVoltageHigh 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1.1.2
The Inlet high voltage threshold, in volts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

slaveInletConfigVoltageLow 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1.1.3
The Inlet low voltage threshold, in volts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

slaveInlet2ConfigVoltageHigh 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1.1.4
The Inlet 2 high voltage threshold, in volts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

slaveInlet2ConfigVoltageLow 1.3.6.1.4.1.4555.1.1.20.1.4.2.2.1.1.5
The Inlet low voltage threshold, in volts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65500  

ipduSlaveOutlet 1.3.6.1.4.1.4555.1.1.20.1.4.3
OBJECT IDENTIFIER    

ipduSlaveOutletConfig 1.3.6.1.4.1.4555.1.1.20.1.4.3.1
OBJECT IDENTIFIER    

ipduSlaveDeviceOutletNameTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletNameEntry

ipduSlaveDeviceOutletNameEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletNameEntry  

slaveOutletNameIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletName01 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.2
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName02 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.3
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName03 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.4
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName04 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.5
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName05 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.6
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName06 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.7
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName07 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.8
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName08 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.9
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName09 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.10
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName10 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.11
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName11 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.12
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName12 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.1.1.13
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduSlaveDeviceOutletLocationTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletLocationEntry

ipduSlaveDeviceOutletLocationEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletLocationEntry  

slaveOutletLocationIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletLocation01 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.2
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation02 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.3
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation03 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.4
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation04 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.5
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation05 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.6
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation06 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.7
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation07 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.8
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation08 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.9
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation09 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.10
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation10 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.11
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation11 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.12
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation12 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.2.1.13
A Description of a outlet name of device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduSlaveDeviceOutletOnTimeTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletOnTimeEntry

ipduSlaveDeviceOutletOnTimeEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletOnTimeEntry  

slaveOutletOnTimeIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletOnTime01 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.2
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime02 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.3
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime03 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.4
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime04 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.5
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime05 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.6
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime06 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.7
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime07 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.8
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime08 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.9
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime09 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.10
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime10 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.11
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime11 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.12
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime12 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.3.1.13
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduSlaveDeviceOutletOffTimeTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletOffTimeEntry

ipduSlaveDeviceOutletOffTimeEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletOffTimeEntry  

slaveOutletOffTimeIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletOffTime01 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.2
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime02 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.3
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime03 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.4
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime04 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.5
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime05 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.6
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime06 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.7
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime07 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.8
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime08 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.9
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime09 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.10
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime10 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.11
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime11 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.12
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime12 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.4.1.13
The delay time before turn on tis outlet, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduSlaveDeviceOutletCurrThTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletCurrThEntry

ipduSlaveDeviceOutletCurrThEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletCurrThEntry  

slaveOutletCurrThIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletCurrTh01 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.2
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh02 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.3
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh03 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.4
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh04 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.5
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh05 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.6
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh06 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.7
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh07 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.8
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh08 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.9
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh09 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.10
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh10 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.11
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh11 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.12
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh12 1.3.6.1.4.1.4555.1.1.20.1.4.3.1.5.1.13
The Outlet Current Threshold ,in 0.1 Amp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipduSlaveOutletStatus 1.3.6.1.4.1.4555.1.1.20.1.4.3.2
OBJECT IDENTIFIER    

ipduSlaveDeviceOutletCurrentTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletCurrentEntry

ipduSlaveDeviceOutletCurrentEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletCurrentEntry  

slaveOutletCurrentIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletCurrent01 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.2
The outlet A Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent02 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.3
The outlet B Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent03 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.4
The outlet C Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent04 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.5
The outlet D Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent05 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.6
The outlet E Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent06 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.7
The outlet F Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent07 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.8
The outlet G Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent08 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.9
The outlet H Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent09 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.10
The outlet I Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent10 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.11
The outlet J Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent11 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.12
The outlet K Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent12 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.1.1.13
The outlet L Current in 0.001 Amp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduSlaveDeviceOutletWattTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletWattEntry

ipduSlaveDeviceOutletWattEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletWattEntry  

slaveOutletWattIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletWatt01 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.2
The outlet A Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt02 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.3
The outlet B Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt03 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.4
The outlet C Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt04 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.5
The outlet D Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt05 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.6
The outlet E Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt06 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.7
The outlet F Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt07 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.8
The outlet G Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt08 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.9
The outlet H Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt09 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.10
The outlet I Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt10 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.11
The outlet J Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt11 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.12
The outlet K Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt12 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.2.1.13
The outlet L Watt in 0.1 W/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduSlaveDeviceOutletKwattTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletKwattEntry

ipduSlaveDeviceOutletKwattEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletKwattEntry  

slaveOutletKwattIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletKwatt01 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.2
The outlet A Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt02 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.3
The outlet B Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt03 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.4
The outlet C Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt04 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.5
The outlet D Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt05 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.6
The outlet E Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt06 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.7
The outlet F Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt07 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.8
The outlet G Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt08 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.9
The outlet H Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt09 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.10
The outlet I Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt10 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.11
The outlet J Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt11 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.12
The outlet K Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt12 1.3.6.1.4.1.4555.1.1.20.1.4.3.2.3.1.13
The outlet L Kwatt in 0.001 KW/H.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipduSlaveOutletAction 1.3.6.1.4.1.4555.1.1.20.1.4.3.3
OBJECT IDENTIFIER    

ipduSlaveDeviceOutletActionTable 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1
A list of outlet on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpduSlaveDeviceOutletActionEntry

ipduSlaveDeviceOutletActionEntry 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1
The outlet number of device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpduSlaveDeviceOutletActionEntry  

slaveOutletActionIndex 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.1
The index to a access outlet configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletAction01 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.2
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction02 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.3
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction03 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.4
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction04 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.5
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction05 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.6
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction06 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.7
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction07 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.8
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction08 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.9
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction09 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.10
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction10 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.11
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction11 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.12
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction12 1.3.6.1.4.1.4555.1.1.20.1.4.3.3.1.1.13
Set to control the outlet perform action as requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

ipduEnvEmd 1.3.6.1.4.1.4555.1.1.20.1.5.1
OBJECT IDENTIFIER    

ipduEnvEmdStatus 1.3.6.1.4.1.4555.1.1.20.1.5.1.1
OBJECT IDENTIFIER    

ipduEnvEmdStatusEmdType 1.3.6.1.4.1.4555.1.1.20.1.5.1.1.1
EMD Type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), eMD-HT(3), eMD-T(4)  

ipduEnvEmdStatusTemperature 1.3.6.1.4.1.4555.1.1.20.1.5.1.1.2
EMD Temperature in 0.1 degree C.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

ipduEnvEmdStatusHumidity 1.3.6.1.4.1.4555.1.1.20.1.5.1.1.3
EMD Humidity in 0.1%.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

ipduEnvEmdStatusAlarm1 1.3.6.1.4.1.4555.1.1.20.1.5.1.1.4
EMD Alarm-1 state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), alarm(3), normal(4)  

ipduEnvEmdStatusAlarm2 1.3.6.1.4.1.4555.1.1.20.1.5.1.1.5
EMD Alarm-2 state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), alarm(3), normal(4)  

ipduEnvEmdConfig 1.3.6.1.4.1.4555.1.1.20.1.5.1.2
OBJECT IDENTIFIER    

ipduEnvEmdConfigEmdPresence 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.1
Configure the EMD presence by auto-detect or not exist (disabled).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), autoDetect(2)  

ipduEnvEmdConfigEmdName 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.2
The name of Emd.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduEnvEmdConfigTemp 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3
OBJECT IDENTIFIER    

ipduEnvEmdConfigTempName 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3.1
The name of EMD Temperature sensor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduEnvEmdConfigTempHighSetPoint 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3.2
EMD Temperature set point high, alarm will active when temperature over this value, in degree C.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..65  

ipduEnvEmdConfigTempHighStatus 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3.3
Enabled/disabled the high setpoint be applied or not
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduEnvEmdConfigTempLowSetPoint 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3.4
EMD Temperature set point high, alarm will active when temperature under this value, in degree C.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..65  

ipduEnvEmdConfigTempLowStatus 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3.5
Enabled/disabled the low setpoint be applied or not
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduEnvEmdConfigTempOffset 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.3.6
Offset of temperature in degree C to adjust EMD temperature measurement.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER t0p0(1), t0p5(2), t1p0(3), t1p5(4), t2p0(5), t2p5(6), t3p0(7), t-0p5(8), t-1p0(9), t-1p5(10), t-2p0(11), t-2p5(12), t-3p0(13)  

ipduEnvEmdConfigHumi 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4
OBJECT IDENTIFIER    

ipduEnvEmdConfigHumiName 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4.1
The name of EMD Humidity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduEnvEmdConfigHumiHighSetPoint 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4.2
EMD humidity set point high, alarm will active when humidity over this value, in %.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..95  

ipduEnvEmdConfigHumiHighStatus 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4.3
Enabled/disabled the high setpoint be applied or not
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduEnvEmdConfigHumiLowSetPoint 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4.4
EMD humidity set point low, alarm will active when humidity under this value, in %.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..95  

ipduEnvEmdConfigHumiLowStatus 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4.5
Enabled/disabled the high setpoint be applied or not
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipduEnvEmdConfigHumiOffset 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.4.6
Emd Hum Offset;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER h0p0(1), h1p0(2), h2p0(3), h3p0(4), h4p0(5), h5p0(6), h6p0(7), h-1p0(8), h-2p0(9), h-3p0(10), h-4p0(11), h-5p0(12), h-6p0(13)  

ipduEnvEmdConfigAlarm1 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.5
OBJECT IDENTIFIER    

ipduEnvEmdConfigAlarm1Name 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.5.1
The name of EMD Alarm-1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduEnvEmdConfigAlarm1Type 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.5.2
EMD Alarm-1 type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), normalOpen(2), normalClose(3)  

ipduEnvEmdConfigAlarm2 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.6
OBJECT IDENTIFIER    

ipduEnvEmdConfigAlarm2Name 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.6.1
The name of EMD Alarm-2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipduEnvEmdConfigAlarm2Type 1.3.6.1.4.1.4555.1.1.20.1.5.1.2.6.2
EMD Alarm-2 type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), normalOpen(2), normalClose(3)  

ipduInletVoltageTooHigh 1
CRITICAL: The input voltage over high threshold.
TRAP-TYPE    

ipduInletVoltageNotTooHigh 2
WARNING: The input voltage return from over high threshold.
TRAP-TYPE    

ipduInletVoltageTooLow 3
CRITICAL: The input voltage under low threshold.
TRAP-TYPE    

ipduInletVoltageNotTooLow 4
WARNING: The input voltage return from under low threshold.
TRAP-TYPE    

ipduInletCurrentTooHigh 5
CRITICAL: The input current over high threshold.
TRAP-TYPE    

ipduInletCurrentNotTooHigh 6
WARNING: The input current return from over high threshold.
TRAP-TYPE    

ipduInletFrequencyTooHigh 7
CRITICAL: The input frequency over high threshold.
TRAP-TYPE    

ipduInletFrequencyNotTooHigh 8
WARNING: The input frequency return from over high threshold.
TRAP-TYPE    

ipduInletFrequencyTooLow 9
CRITICAL: The input frequency under low threshold.
TRAP-TYPE    

ipduInletFrequencyNotTooLow 10
WARNING: The input frequency return from under low threshold.
TRAP-TYPE    

ipduInlet2VoltageTooHigh 11
CRITICAL: The input2 voltage over high threshold.
TRAP-TYPE    

ipduInlet2VoltageNotTooHigh 12
WARNING: The input2 voltage return from over high threshold.
TRAP-TYPE    

ipduInlet2VoltageTooLow 13
CRITICAL: The input2 voltage under low threshold.
TRAP-TYPE    

ipduInlet2VoltageNotTooLow 14
WARNING: The input2 voltage return from under low threshold.
TRAP-TYPE    

ipduInlet2CurrentTooHigh 15
CRITICAL: The input2 current over high threshold.
TRAP-TYPE    

ipduInlet2CurrentNotTooHigh 16
WARNING: The input2 current return from over high threshold.
TRAP-TYPE    

ipduInlet2FrequencyTooHigh 17
CRITICAL: The input2 frequency over high threshold.
TRAP-TYPE    

ipduInlet2FrequencyNotTooHigh 18
WARNING: The input2 frequency return from over high threshold.
TRAP-TYPE    

ipduInlet2FrequencyTooLow 19
CRITICAL: The input2 frequency under low threshold.
TRAP-TYPE    

ipduInlet2FrequencyNotTooLow 20
WARNING: The input2 frequency return from under low threshold.
TRAP-TYPE    

ipduOutletCurrentTooHigh 21
CRITICAL: The output current of outlet over high threshold.
TRAP-TYPE    

ipduOutletCurrentNotTooHigh 22
WARNING: The output current of outlet return from over high threshold.
TRAP-TYPE    

ipduOutletStateChanged 23
INFORMATION: The outlet state had changed from on to off, or from off to on.
TRAP-TYPE    

ipduEmdTemperatureNotHigh 24
INFORMATION: emd Temperature Not High.
TRAP-TYPE    

ipduEmdTemperatureTooHigh 25
WARNING: emd Temperature Too High.
TRAP-TYPE    

ipduEmdTemperatureNotLow 26
INFORMATION: emd Temperature Not Low.
TRAP-TYPE    

ipduEmdTemperatureTooLow 27
WARNING: emd Temperature Too Low.
TRAP-TYPE    

ipduEmdHumidityNotHigh 28
INFORMATION: emd Humidity Not High.
TRAP-TYPE    

ipduEmdHumidityTooHigh 29
WARNING: emd Humidity Too High.
TRAP-TYPE    

ipduEmdHumidityNotLow 30
INFORMATION: emd Humidity Not Low.
TRAP-TYPE    

ipduEmdHumidityTooLow 31
WARNING: emd Humidity Too Low.
TRAP-TYPE    

ipduEmdAlarm1Normal 32
INFORMATION: emd Alarm1 Normal.
TRAP-TYPE    

ipduEmdAlarm1Active 33
WARNING: emd Alarm1 Active.
TRAP-TYPE    

ipduEmdAlarm2Normal 34
INFORMATION: emd Alarm2 Normal.
TRAP-TYPE    

ipduEmdAlarm2Active 35
WARNING: emd Alarm2 Active.
TRAP-TYPE    

ipduSlave01Inlet01OverHigh 36
CRITICAL: The Slave01 input01 voltage over high threshold.
TRAP-TYPE    

ipduSlave01Inlet01NotOverHigh 37
CRITICAL: The Slave01 input01 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave01Inlet02OverHigh 38
CRITICAL: The Slave01 input02 voltage over high threshold.
TRAP-TYPE    

ipduSlave01Inlet02NotOverHigh 39
CRITICAL: The Slave01 input02 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave01Inlet01UnderLow 40
CRITICAL: The Slave01 input01 voltage under low threshold.
TRAP-TYPE    

ipduSlave01Inlet01NotUnderLow 41
CRITICAL: The Slave01 input01 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave01Inlet02UnderLow 42
CRITICAL: The Slave01 input02 voltage under low threshold.
TRAP-TYPE    

ipduSlave01Inlet02NotUnderLow 43
CRITICAL: The Slave01 input02 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave01Inlet01CurrentOverTh 44
CRITICAL: The Slave01 input01 current over high threshold.
TRAP-TYPE    

ipduSlave01Inlet01NotCurrentOverTh 45
CRITICAL: The Slave01 input01 current not over high threshold.
TRAP-TYPE    

ipduSlave01Inlet02CurrentOverTh 46
CRITICAL: The Slave01 input02 current over high threshold.
TRAP-TYPE    

ipduSlave01Inlet02NotCurrentOverTh 47
CRITICAL: The Slave01 input02 current not over high threshold.
TRAP-TYPE    

ipduSlave01EmdTemperatureNotHigh 48
INFORMATION: The Slave01 emd Temperature Not High.
TRAP-TYPE    

ipduSlave01EmdTemperatureTooHigh 49
WARNING: The Slave01 emd Temperature Too High.
TRAP-TYPE    

ipduSlave01EmdTemperatureNotLow 50
INFORMATION: The Slave01 emd Temperature Not Low.
TRAP-TYPE    

ipduSlave01EmdTemperatureTooLow 51
WARNING: The Slave01 emd Temperature Too Low.
TRAP-TYPE    

ipduSlave01EmdHumidityNotHigh 52
INFORMATION: The Slave01 emd Humidity Not High.
TRAP-TYPE    

ipduSlave01EmdHumidityTooHigh 53
WARNING: The Slave01 emd Humidity Too High.
TRAP-TYPE    

ipduSlave01EmdHumidityNotLow 54
INFORMATION: The Slave01 emd Humidity Not Low.
TRAP-TYPE    

ipduSlave01EmdHumidityTooLow 55
WARNING: The Slave01 emd Humidity Too Low.
TRAP-TYPE    

ipduSlave01EmdAlarm1Normal 56
INFORMATION: The Slave01 emd Alarm1 Normal.
TRAP-TYPE    

ipduSlave01EmdAlarm1Active 57
WARNING: The Slave01 emd Alarm1 Active.
TRAP-TYPE    

ipduSlave01EmdAlarm2Normal 58
INFORMATION: The Slave01 emd Alarm2 Normal.
TRAP-TYPE    

ipduSlave01EmdAlarm2Active 59
WARNING: The Slave01 emd Alarm2 Active.
TRAP-TYPE    

ipduSlave01OutletCurrentOverTh 60
WARNING: The Slave01 Outlet Current over threshold.
TRAP-TYPE    

ipduSlave02Inlet01OverHigh 61
CRITICAL: The Slave02 input01 voltage over high threshold.
TRAP-TYPE    

ipduSlave02Inlet01NotOverHigh 62
CRITICAL: The Slave02 input01 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave02Inlet02OverHigh 63
CRITICAL: The Slave02 input02 voltage over high threshold.
TRAP-TYPE    

ipduSlave02Inlet02NotOverHigh 64
CRITICAL: The Slave02 input02 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave02Inlet01UnderLow 65
CRITICAL: The Slave02 input01 voltage under low threshold.
TRAP-TYPE    

ipduSlave02Inlet01NotUnderLow 66
CRITICAL: The Slave02 input01 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave02Inlet02UnderLow 67
CRITICAL: The Slave02 input02 voltage under low threshold.
TRAP-TYPE    

ipduSlave02Inlet02NotUnderLow 68
CRITICAL: The Slave02 input02 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave02Inlet01CurrentOverTh 69
CRITICAL: The Slave02 input01 current over high threshold.
TRAP-TYPE    

ipduSlave02Inlet01NotCurrentOverTh 70
CRITICAL: The Slave02 input01 current not over high threshold.
TRAP-TYPE    

ipduSlave02Inlet02CurrentOverTh 71
CRITICAL: The Slave02 input02 current over high threshold.
TRAP-TYPE    

ipduSlave02Inlet02NotCurrentOverTh 72
CRITICAL: The Slave02 input02 current not over high threshold.
TRAP-TYPE    

ipduSlave02EmdTemperatureNotHigh 73
INFORMATION: The Slave02 emd Temperature Not High.
TRAP-TYPE    

ipduSlave02EmdTemperatureTooHigh 74
WARNING: The Slave02 emd Temperature Too High.
TRAP-TYPE    

ipduSlave02EmdTemperatureNotLow 75
INFORMATION: The Slave02 emd Temperature Not Low.
TRAP-TYPE    

ipduSlave02EmdTemperatureTooLow 76
WARNING: The Slave02 emd Temperature Too Low.
TRAP-TYPE    

ipduSlave02EmdHumidityNotHigh 77
INFORMATION: The Slave02 emd Humidity Not High.
TRAP-TYPE    

ipduSlave02EmdHumidityTooHigh 78
WARNING: The Slave02 emd Humidity Too High.
TRAP-TYPE    

ipduSlave02EmdHumidityNotLow 79
INFORMATION: The Slave02 emd Humidity Not Low.
TRAP-TYPE    

ipduSlave02EmdHumidityTooLow 80
WARNING: The Slave02 emd Humidity Too Low.
TRAP-TYPE    

ipduSlave02EmdAlarm1Normal 81
INFORMATION: The Slave02 emd Alarm1 Normal.
TRAP-TYPE    

ipduSlave02EmdAlarm1Active 82
WARNING: The Slave02 emd Alarm1 Active.
TRAP-TYPE    

ipduSlave02EmdAlarm2Normal 83
INFORMATION: The Slave02 emd Alarm2 Normal.
TRAP-TYPE    

ipduSlave02EmdAlarm2Active 84
WARNING: The Slave02 emd Alarm2 Active.
TRAP-TYPE    

ipduSlave02OutletCurrentOverTh 85
WARNING: The Slave02 Outlet Current over threshold.
TRAP-TYPE    

ipduSlave03Inlet01OverHigh 86
CRITICAL: The Slave03 input01 voltage over high threshold.
TRAP-TYPE    

ipduSlave03Inlet01NotOverHigh 87
CRITICAL: The Slave03 input01 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave03Inlet02OverHigh 88
CRITICAL: The Slave03 input02 voltage over high threshold.
TRAP-TYPE    

ipduSlave03Inlet02NotOverHigh 89
CRITICAL: The Slave03 input02 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave03Inlet01UnderLow 90
CRITICAL: The Slave03 input01 voltage under low threshold.
TRAP-TYPE    

ipduSlave03Inlet01NotUnderLow 91
CRITICAL: The Slave03 input01 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave03Inlet02UnderLow 92
CRITICAL: The Slave03 input02 voltage under low threshold.
TRAP-TYPE    

ipduSlave03Inlet02NotUnderLow 93
CRITICAL: The Slave03 input02 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave03Inlet01CurrentOverTh 94
CRITICAL: The Slave03 input01 current over high threshold.
TRAP-TYPE    

ipduSlave03Inlet01NotCurrentOverTh 95
CRITICAL: The Slave03 input01 current not over high threshold.
TRAP-TYPE    

ipduSlave03Inlet02CurrentOverTh 96
CRITICAL: The Slave03 input02 current over high threshold.
TRAP-TYPE    

ipduSlave03Inlet02NotCurrentOverTh 97
CRITICAL: The Slave03 input02 current not over high threshold.
TRAP-TYPE    

ipduSlave03EmdTemperatureNotHigh 98
INFORMATION: The Slave03 emd Temperature Not High.
TRAP-TYPE    

ipduSlave03EmdTemperatureTooHigh 99
WARNING: The Slave03 emd Temperature Too High.
TRAP-TYPE    

ipduSlave03EmdTemperatureNotLow 100
INFORMATION: The Slave03 emd Temperature Not Low.
TRAP-TYPE    

ipduSlave03EmdTemperatureTooLow 101
WARNING: The Slave03 emd Temperature Too Low.
TRAP-TYPE    

ipduSlave03EmdHumidityNotHigh 102
INFORMATION: The Slave03 emd Humidity Not High.
TRAP-TYPE    

ipduSlave03EmdHumidityTooHigh 103
WARNING: The Slave03 emd Humidity Too High.
TRAP-TYPE    

ipduSlave03EmdHumidityNotLow 104
INFORMATION: The Slave03 emd Humidity Not Low.
TRAP-TYPE    

ipduSlave03EmdHumidityTooLow 105
WARNING: The Slave03 emd Humidity Too Low.
TRAP-TYPE    

ipduSlave03EmdAlarm1Normal 106
INFORMATION: The Slave03 emd Alarm1 Normal.
TRAP-TYPE    

ipduSlave03EmdAlarm1Active 107
WARNING: The Slave03 emd Alarm1 Active.
TRAP-TYPE    

ipduSlave03EmdAlarm2Normal 108
INFORMATION: The Slave03 emd Alarm2 Normal.
TRAP-TYPE    

ipduSlave03EmdAlarm2Active 109
WARNING: The Slave03 emd Alarm2 Active.
TRAP-TYPE    

ipduSlave03OutletCurrentOverTh 110
WARNING: The Slave03 Outlet Current over threshold.
TRAP-TYPE    

ipduSlave04Inlet01OverHigh 111
CRITICAL: The Slave04 input01 voltage over high threshold.
TRAP-TYPE    

ipduSlave04Inlet01NotOverHigh 112
CRITICAL: The Slave04 input01 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave04Inlet02OverHigh 113
CRITICAL: The Slave04 input02 voltage over high threshold.
TRAP-TYPE    

ipduSlave04Inlet02NotOverHigh 114
CRITICAL: The Slave04 input02 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave04Inlet01UnderLow 115
CRITICAL: The Slave04 input01 voltage under low threshold.
TRAP-TYPE    

ipduSlave04Inlet01NotUnderLow 116
CRITICAL: The Slave04 input01 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave04Inlet02UnderLow 117
CRITICAL: The Slave04 input02 voltage under low threshold.
TRAP-TYPE    

ipduSlave04Inlet02NotUnderLow 118
CRITICAL: The Slave04 input02 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave04Inlet01CurrentOverTh 119
CRITICAL: The Slave04 input01 current over high threshold.
TRAP-TYPE    

ipduSlave04Inlet01NotCurrentOverTh 120
CRITICAL: The Slave04 input01 current not over high threshold.
TRAP-TYPE    

ipduSlave04Inlet02CurrentOverTh 121
CRITICAL: The Slave04 input02 current over high threshold.
TRAP-TYPE    

ipduSlave04Inlet02NotCurrentOverTh 122
CRITICAL: The Slave04 input02 current not over high threshold.
TRAP-TYPE    

ipduSlave04EmdTemperatureNotHigh 123
INFORMATION: The Slave04 emd Temperature Not High.
TRAP-TYPE    

ipduSlave04EmdTemperatureTooHigh 124
WARNING: The Slave04 emd Temperature Too High.
TRAP-TYPE    

ipduSlave04EmdTemperatureNotLow 125
INFORMATION: The Slave04 emd Temperature Not Low.
TRAP-TYPE    

ipduSlave04EmdTemperatureTooLow 126
WARNING: The Slave04 emd Temperature Too Low.
TRAP-TYPE    

ipduSlave04EmdHumidityNotHigh 127
INFORMATION: The Slave04 emd Humidity Not High.
TRAP-TYPE    

ipduSlave04EmdHumidityTooHigh 128
WARNING: The Slave04 emd Humidity Too High.
TRAP-TYPE    

ipduSlave04EmdHumidityNotLow 129
INFORMATION: The Slave04 emd Humidity Not Low.
TRAP-TYPE    

ipduSlave04EmdHumidityTooLow 130
WARNING: The Slave04 emd Humidity Too Low.
TRAP-TYPE    

ipduSlave04EmdAlarm1Normal 131
INFORMATION: The Slave04 emd Alarm1 Normal.
TRAP-TYPE    

ipduSlave04EmdAlarm1Active 132
WARNING: The Slave04 emd Alarm1 Active.
TRAP-TYPE    

ipduSlave04EmdAlarm2Normal 133
INFORMATION: The Slave04 emd Alarm2 Normal.
TRAP-TYPE    

ipduSlave04EmdAlarm2Active 134
WARNING: The Slave04 emd Alarm2 Active.
TRAP-TYPE    

ipduSlave04OutletCurrentOverTh 135
WARNING: The Slave04 Outlet Current over threshold.
TRAP-TYPE    

ipduSlave05Inlet01OverHigh 136
CRITICAL: The Slave05 input01 voltage over high threshold.
TRAP-TYPE    

ipduSlave05Inlet01NotOverHigh 137
CRITICAL: The Slave05 input01 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave05Inlet02OverHigh 138
CRITICAL: The Slave05 input02 voltage over high threshold.
TRAP-TYPE    

ipduSlave05Inlet02NotOverHigh 139
CRITICAL: The Slave05 input02 voltage Not over high threshold.
TRAP-TYPE    

ipduSlave05Inlet01UnderLow 140
CRITICAL: The Slave05 input01 voltage under low threshold.
TRAP-TYPE    

ipduSlave05Inlet01NotUnderLow 141
CRITICAL: The Slave05 input01 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave05Inlet02UnderLow 142
CRITICAL: The Slave05 input02 voltage under low threshold.
TRAP-TYPE    

ipduSlave05Inlet02NotUnderLow 143
CRITICAL: The Slave05 input02 voltage Not under low threshold.
TRAP-TYPE    

ipduSlave05Inlet01CurrentOverTh 144
CRITICAL: The Slave05 input01 current over high threshold.
TRAP-TYPE    

ipduSlave05Inlet01NotCurrentOverTh 145
CRITICAL: The Slave05 input01 current not over high threshold.
TRAP-TYPE    

ipduSlave05Inlet02CurrentOverTh 146
CRITICAL: The Slave05 input02 current over high threshold.
TRAP-TYPE    

ipduSlave05Inlet02NotCurrentOverTh 147
CRITICAL: The Slave05 input02 current not over high threshold.
TRAP-TYPE    

ipduSlave05EmdTemperatureNotHigh 148
INFORMATION: The Slave05 emd Temperature Not High.
TRAP-TYPE    

ipduSlave05EmdTemperatureTooHigh 149
WARNING: The Slave05 emd Temperature Too High.
TRAP-TYPE    

ipduSlave05EmdTemperatureNotLow 150
INFORMATION: The Slave05 emd Temperature Not Low.
TRAP-TYPE    

ipduSlave05EmdTemperatureTooLow 151
WARNING: The Slave05 emd Temperature Too Low.
TRAP-TYPE    

ipduSlave05EmdHumidityNotHigh 152
INFORMATION: The Slave05 emd Humidity Not High.
TRAP-TYPE    

ipduSlave05EmdHumidityTooHigh 153
WARNING: The Slave05 emd Humidity Too High.
TRAP-TYPE    

ipduSlave05EmdHumidityNotLow 154
INFORMATION: The Slave05 emd Humidity Not Low.
TRAP-TYPE    

ipduSlave05EmdHumidityTooLow 155
WARNING: The Slave05 emd Humidity Too Low.
TRAP-TYPE    

ipduSlave05EmdAlarm1Normal 156
INFORMATION: The Slave05 emd Alarm1 Normal.
TRAP-TYPE    

ipduSlave05EmdAlarm1Active 157
WARNING: The Slave05 emd Alarm1 Active.
TRAP-TYPE    

ipduSlave05EmdAlarm2Normal 158
INFORMATION: The Slave05 emd Alarm2 Normal.
TRAP-TYPE    

ipduSlave05EmdAlarm2Active 159
WARNING: The Slave05 emd Alarm2 Active.
TRAP-TYPE    

ipduSlave05OutletCurrentOverTh 160
WARNING: The Slave05 Outlet Current over threshold.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor