SLE-PERFORMANCEMGMT-MIB

File: SLE-PERFORMANCEMGMT-MIB.mib (96675 bytes)

Imported modules

DASAN-SMI IF-MIB SNMPv2-CONF
SNMPv2-SMI

Imported symbols

sleMgmt InterfaceIndex OBJECT-GROUP
NOTIFICATION-GROUP TimeTicks Integer32
Unsigned32 Gauge32 Counter64
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE

Defined Types

SleControlStatusType  
INTEGER idle(1), busy(2), passed(3), failed(4)    

SleControlRequestResultType  
INTEGER noRequest(1), comExecStarted(5), paramFaulty(11), requestBusy(12), setDataFailed(13), aswTimeout(14), commandFailed(15), commandSuccessed(16)    

SleStatisticsClearTableIndexType  
INTEGER counter(1), portStatisticsTable(2), dot1xPortStatisticsTable(3), lldpStatisticsTable(4)    

SlePortThresholdEntry  
SEQUENCE    
  sleThresholdIndex INTEGER
  slePortThresholdUpLimit Integer32
  slePortThresholdUpSamplingInterval INTEGER
  slePortThresholdDownLimit Integer32
  slePortThresholdDownSamplingInterval INTEGER
  slePortThresholdBlockTimer INTEGER
  slePortThresholdPpsCurrLimit Integer32
  slePortThresholdPpsBlocked Integer32
  slePortThresholdPpsLimit Integer32
  slePortThresholdPpsInterval INTEGER
  slePortThresholdPpsBlockTimer INTEGER
  slePortThresholdWarnTxLimit Integer32
  slePortThresholdWarnTxInterval INTEGER
  slePortThresholdWarnTxDuration INTEGER
  slePortThresholdWarnRxLimit Integer32
  slePortThresholdWarnRxInterval INTEGER
  slePortThresholdWarnRxDuration INTEGER
  slePortThresholdAlarmTxLimit Integer32
  slePortThresholdAlarmTxInterval INTEGER
  slePortThresholdAlarmTxDuration INTEGER
  slePortThresholdAlarmRxLimit Integer32
  slePortThresholdAlarmRxInterval INTEGER
  slePortThresholdAlarmRxDuration INTEGER

SlePortRateEntry  
SEQUENCE    
  slePortRateInterfaceIndex INTEGER
  slePortRateIngressRate Integer32
  slePortRateEgressRate Integer32
  slePortRateEnhanced INTEGER
  slePortRateIngressRateType INTEGER

SlePortStatisticsEntry  
SEQUENCE    
  slePortStatsIndex INTEGER
  slePortStatsInterval INTEGER
  slePortStatsOrder INTEGER
  slePortStatsUpPackets Counter64
  slePortStatsUpBytes Counter64
  slePortStatsDownPackets Counter64
  slePortStatsDownBytes Counter64

SlePortStatisticsAverageEntry  
SEQUENCE    
  slePortStatsAvgInterval INTEGER
  slePortStatsAvgTxPackets Counter64
  slePortStatsAvgTxBytes Counter64
  slePortStatsAvgTxUcastPackets Counter64
  slePortStatsAvgTxMcastPackets Counter64
  slePortStatsAvgTxBcastPackets Counter64
  slePortStatsAvgRxPackets Counter64
  slePortStatsAvgRxBytes Counter64
  slePortStatsAvgRxUcastPackets Counter64
  slePortStatsAvgRxMcastPackets Counter64
  slePortStatsAvgRxBcastPackets Counter64

SlePortStatisticsAccEntry  
SEQUENCE    
  slePortStatisticsAccHCIndex InterfaceIndex
  slePortStatisticsAccHCInUnicastPkts Counter64
  slePortStatisticsAccHCInMulticastPkts Counter64
  slePortStatisticsAccHCInBroadcastPkts Counter64
  slePortStatisticsAccHCOutUnicastPkts Counter64
  slePortStatisticsAccHCOutMulticastPkts Counter64
  slePortStatisticsAccHCOutBroadcastPkts Counter64
  slePortStatisticsAccHCInOctets Counter64
  slePortStatisticsAccHCOutOctets Counter64
  slePortStatisticsAccHCOutVlanTagPkts Counter64
  slePortStatisticsAccHCInPauseFrame Counter64
  slePortStatisticsAccHCOutPauseFrame Counter64
  slePortStatisticsAccHCIpFwDatagrams Counter64
  slePortStatisticsAccHCIpInReceives Counter64
  slePortStatisticsAccHCInDiscardsPkts Counter64
  slePortStatisticsAccHCOutDiscardsPkts Counter64
  slePortStatisticsAccHCInErrorsPkts Counter64
  slePortStatisticsAccHCOutErrorsPkts Counter64

SlePortStatisticsPacketPerQueueEntry  
SEQUENCE    
  slePortStatisticsPPQPortNum INTEGER
  slePortStatisticsPPQQueueNumber INTEGER
  slePortStatisticsPPQPacketPassedCount Counter64
  slePortStatisticsPPQOctetPassedCount Counter64
  slePortStatisticsPPQPacketDiscards Counter64
  slePortStatisticsPPQOctetDiscard Counter64
  slePortStatisticsPPQPacketNonUnicastDiscards Counter64
  slePortStatisticsPPQOctetNonUnicastDiscards Counter64
  slePortStatisticsPPQPacketUnicastDiscards Counter64
  slePortStatisticsPPQOctetUnicastDiscards Counter64
  slePortStatisticsPPQPktEnqueued Counter64
  slePortStatisticsPPQOctEnqueued Counter64

SleCpuIntervalStatisticsEntry  
SEQUENCE    
  sleCpuIntvlStatsPortIndex InterfaceIndex
  sleCpuIntvlStatsInterval INTEGER
  sleCpuIntvlStatsOrder INTEGER
  sleCpuIntvlStatsTxUcastPkts Counter64
  sleCpuIntvlStatsTxMcastPkts Counter64
  sleCpuIntvlStatsTxBcastPkts Counter64
  sleCpuIntvlStatsTxUcastBytes Counter64
  sleCpuIntvlStatsTxMcastBytes Counter64
  sleCpuIntvlStatsTxBcastBytes Counter64
  sleCpuIntvlStatsRxUcastPkts Counter64
  sleCpuIntvlStatsRxMcastPkts Counter64
  sleCpuIntvlStatsRxBcastPkts Counter64
  sleCpuIntvlStatsRxUcastBytes Counter64
  sleCpuIntvlStatsRxMcastBytes Counter64
  sleCpuIntvlStatsRxBcastBytes Counter64

SleCpuStatisticsEntry  
SEQUENCE    
  sleCpuStatsPortIndex InterfaceIndex
  sleCpuStatsTxUcastPkts Counter64
  sleCpuStatsTxMcastPkts Counter64
  sleCpuStatsTxBcastPkts Counter64
  sleCpuStatsTxUcastBytes Counter64
  sleCpuStatsTxMcastBytes Counter64
  sleCpuStatsTxBcastBytes Counter64
  sleCpuStatsRxUcastPkts Counter64
  sleCpuStatsRxMcastPkts Counter64
  sleCpuStatsRxBcastPkts Counter64
  sleCpuStatsRxUcastBytes Counter64
  sleCpuStatsRxMcastBytes Counter64
  sleCpuStatsRxBcastBytes Counter64

SleSfpmonThresholdEntry  
SEQUENCE    
  sleSfpmonThresholdIndex INTEGER
  sleSfpmonWarnTxPowerLow Integer32
  sleSfpmonWarnTxPowerHigh Integer32
  sleSfpmonWarnTxPowerDuration INTEGER
  sleSfpmonWarnRxPowerLow Integer32
  sleSfpmonWarnRxPowerHigh Integer32
  sleSfpmonWarnRxPowerDuration INTEGER
  sleSfpmonAlarmTxPowerLow Integer32
  sleSfpmonAlarmTxPowerHigh Integer32
  sleSfpmonAlarmTxPowerDuration INTEGER
  sleSfpmonAlarmRxPowerLow Integer32
  sleSfpmonAlarmRxPowerHigh Integer32
  sleSfpmonAlarmRxPowerDuration INTEGER
  sleSfpmonWarnTxbiasLow Integer32
  sleSfpmonWarnTxbiasHigh Integer32
  sleSfpmonAlarmTxbiasLow Integer32
  sleSfpmonAlarmTxbiasHigh Integer32
  sleSfpmonWarnTemperLow Integer32
  sleSfpmonWarnTemperHigh Integer32
  sleSfpmonAlarmTemperLow Integer32
  sleSfpmonAlarmTemperHigh Integer32
  sleSfpmonWarnVoltageLow Integer32
  sleSfpmonWarnVoltageHigh Integer32
  sleSfpmonAlarmVoltageLow Integer32
  sleSfpmonAlarmVoltageHigh Integer32
  sleSfpmonWarnTxPowerMode INTEGER
  sleSfpmonAlarmTxPowerMode INTEGER
  sleSfpmonWarnRxPowerMode INTEGER
  sleSfpmonAlarmRxPowerMode INTEGER
  sleSfpmonWarnTxbiasMode INTEGER
  sleSfpmonAlarmTxbiasMode INTEGER
  sleSfpmonWarnTemperMode INTEGER
  sleSfpmonAlarmTemperMode INTEGER
  sleSfpmonWarnVoltageMode INTEGER
  sleSfpmonAlarmVoltageMode INTEGER

SleVlanStatisticsEntry  
SEQUENCE    
  sleVlanStatisticsIndex Integer32
  sleVlanStatisticsIngressBytes Counter64
  sleVlanStatisticsEgressBytes Counter64
  sleVlanStatisticsIngressPackets Counter64
  sleVlanStatisticsEgressPackets Counter64

SlePhyInternalStatEntry  
SEQUENCE    
  slePhyInternalStatIndex Integer32

SlePhyExternalStatEntry  
SEQUENCE    
  slePhyExternalStatIfIndex Integer32
  slePhyExternalStatEtherStatsCRCAlignErrors Counter64
  slePhyExternalStatRxMacDiscards Counter64
  slePhyExternalStatIdleError Counter64

Defined Values

slePerformanceMgmt 1.3.6.1.4.1.6296.101.5
Description.
MODULE-IDENTITY    

slePortThreshold 1.3.6.1.4.1.6296.101.5.1
OBJECT IDENTIFIER    

slePortThresholdTable 1.3.6.1.4.1.6296.101.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortThresholdEntry

slePortThresholdEntry 1.3.6.1.4.1.6296.101.5.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortThresholdEntry  

sleThresholdIndex 1.3.6.1.4.1.6296.101.5.1.1.1.1
port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

slePortThresholdUpLimit 1.3.6.1.4.1.6296.101.5.1.1.1.2
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdUpSamplingInterval 1.3.6.1.4.1.6296.101.5.1.1.1.3
The sampling interval value in second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdDownLimit 1.3.6.1.4.1.6296.101.5.1.1.1.4
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdDownSamplingInterval 1.3.6.1.4.1.6296.101.5.1.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdBlockTimer 1.3.6.1.4.1.6296.101.5.1.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1 | 10..3600  

slePortThresholdPpsCurrLimit 1.3.6.1.4.1.6296.101.5.1.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdPpsBlocked 1.3.6.1.4.1.6296.101.5.1.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdPpsLimit 1.3.6.1.4.1.6296.101.5.1.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdPpsInterval 1.3.6.1.4.1.6296.101.5.1.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 5 | 60 | 600  

slePortThresholdPpsBlockTimer 1.3.6.1.4.1.6296.101.5.1.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1 | 10..3600  

slePortThresholdWarnTxLimit 1.3.6.1.4.1.6296.101.5.1.1.1.12
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdWarnTxInterval 1.3.6.1.4.1.6296.101.5.1.1.1.13
The sampling interval value in second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdWarnTxDuration 1.3.6.1.4.1.6296.101.5.1.1.1.14
The sampling duration value in second. Duration-time units by the 5 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

slePortThresholdWarnRxLimit 1.3.6.1.4.1.6296.101.5.1.1.1.15
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdWarnRxInterval 1.3.6.1.4.1.6296.101.5.1.1.1.16
The sampling interval value in second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdWarnRxDuration 1.3.6.1.4.1.6296.101.5.1.1.1.17
The sampling duration value in second. Duration-time units by the 5 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

slePortThresholdAlarmTxLimit 1.3.6.1.4.1.6296.101.5.1.1.1.18
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdAlarmTxInterval 1.3.6.1.4.1.6296.101.5.1.1.1.19
The sampling interval value in second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdAlarmTxDuration 1.3.6.1.4.1.6296.101.5.1.1.1.20
The sampling duration value in second. Duration-time units by the 5 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

slePortThresholdAlarmRxLimit 1.3.6.1.4.1.6296.101.5.1.1.1.21
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortThresholdAlarmRxInterval 1.3.6.1.4.1.6296.101.5.1.1.1.22
The sampling interval value in second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdAlarmRxDuration 1.3.6.1.4.1.6296.101.5.1.1.1.23
The sampling duration value in second. Duration-time units by the 5 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

slePortThresholdControl 1.3.6.1.4.1.6296.101.5.1.2
OBJECT IDENTIFIER    

slePortThresholdControlRequest 1.3.6.1.4.1.6296.101.5.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setPortThresholdProfile(1), setPortThresholdBlockProfile(2), setPortThresholdPPSProfile(3), setPortThresholdPPSBlockProfile(4), setPortThresholdWarnTxProfile(5), setPortThresholdWarnRxProfile(6), setPortThresholdAlarmTxProfile(7), setPortThresholdAlarmRxProfile(8)  

slePortThresholdControlStatus 1.3.6.1.4.1.6296.101.5.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePortThresholdControlTimer 1.3.6.1.4.1.6296.101.5.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePortThresholdControlTimeStamp 1.3.6.1.4.1.6296.101.5.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePortThresholdControlReqResult 1.3.6.1.4.1.6296.101.5.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePortThresholdControlIndex 1.3.6.1.4.1.6296.101.5.1.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

slePortThresholdControlThresholdUpLimit 1.3.6.1.4.1.6296.101.5.1.2.7
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortThresholdControlUpSamplingInterval 1.3.6.1.4.1.6296.101.5.1.2.8
The sampling interval value in second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdControlThresholdDownLimit 1.3.6.1.4.1.6296.101.5.1.2.9
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortThresholdControlDownSamplingInterval 1.3.6.1.4.1.6296.101.5.1.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdControlBlockTimer 1.3.6.1.4.1.6296.101.5.1.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -1 | 10..3600  

slePortThresholdControlPpsLimit 1.3.6.1.4.1.6296.101.5.1.2.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortThresholdControlPpsInterval 1.3.6.1.4.1.6296.101.5.1.2.13
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 5 | 60 | 600  

slePortThresholdControlPpsBlockTimer 1.3.6.1.4.1.6296.101.5.1.2.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -1 | 10..3600  

slePortThresholdControlThresholdLimit 1.3.6.1.4.1.6296.101.5.1.2.15
The threshold of port bandwidth. Unit: Kbps Validvalues: 1~ ( -1 : delete threshold profile. )
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortThresholdControlSamplingInterval 1.3.6.1.4.1.6296.101.5.1.2.16
The sampling interval value in second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), second5(5), second60(60), second600(600)  

slePortThresholdControlSamplingDuration 1.3.6.1.4.1.6296.101.5.1.2.17
The sampling interval value in second. Duration-time units by the 5 sec
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..300  

slePortThresholdNotification 1.3.6.1.4.1.6296.101.5.1.3
OBJECT IDENTIFIER    

slePortThresholdChanged 1.3.6.1.4.1.6296.101.5.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortThresholdBlockProfileChanged 1.3.6.1.4.1.6296.101.5.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortThresholdPPSProfileChanged 1.3.6.1.4.1.6296.101.5.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortThresholdPPSBlockProfileChanged 1.3.6.1.4.1.6296.101.5.1.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortRate 1.3.6.1.4.1.6296.101.5.2
OBJECT IDENTIFIER    

slePortRateTable 1.3.6.1.4.1.6296.101.5.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortRateEntry

slePortRateEntry 1.3.6.1.4.1.6296.101.5.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortRateEntry  

slePortRateInterfaceIndex 1.3.6.1.4.1.6296.101.5.2.1.1.1
Interface Index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

slePortRateIngressRate 1.3.6.1.4.1.6296.101.5.2.1.1.2
Ingress rate for port. The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortRateEgressRate 1.3.6.1.4.1.6296.101.5.2.1.1.3
Egress rate for port, The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slePortRateEnhanced 1.3.6.1.4.1.6296.101.5.2.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

slePortRateIngressRateType 1.3.6.1.4.1.6296.101.5.2.1.1.5
The ingress rate type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(-1), drop(1), shape(2)  

slePortRateControl 1.3.6.1.4.1.6296.101.5.2.2
OBJECT IDENTIFIER    

slePortRateControlReqest 1.3.6.1.4.1.6296.101.5.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setPortRateProfile(1), setPortRateEnhanced(2)  

slePortRateControlStatus 1.3.6.1.4.1.6296.101.5.2.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePortRateControlTimer 1.3.6.1.4.1.6296.101.5.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePortRateControlTimeStamp 1.3.6.1.4.1.6296.101.5.2.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePortRateControlReqResult 1.3.6.1.4.1.6296.101.5.2.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePortRateControlInterfaceIndex 1.3.6.1.4.1.6296.101.5.2.2.6
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

slePortRateControlIngressRate 1.3.6.1.4.1.6296.101.5.2.2.7
Ingress rate for port. The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortRateControlEgressRate 1.3.6.1.4.1.6296.101.5.2.2.8
Egress rate for port, The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortRateControlEnhanced 1.3.6.1.4.1.6296.101.5.2.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

slePortRateControlIngressRateType 1.3.6.1.4.1.6296.101.5.2.2.10
The ingress rate type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER undefined(-1), drop(1), shape(2)  

slePortRateNotification 1.3.6.1.4.1.6296.101.5.2.3
OBJECT IDENTIFIER    

slePortRateProfileChanged 1.3.6.1.4.1.6296.101.5.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortRateEnhancedChanged 1.3.6.1.4.1.6296.101.5.2.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortStatistics 1.3.6.1.4.1.6296.101.5.3
OBJECT IDENTIFIER    

slePortStatisticsTable 1.3.6.1.4.1.6296.101.5.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortStatisticsEntry

slePortStatisticsEntry 1.3.6.1.4.1.6296.101.5.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortStatisticsEntry  

slePortStatsIndex 1.3.6.1.4.1.6296.101.5.3.1.1.1
Port index of EthernetPort, only valid for physical ports.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

slePortStatsInterval 1.3.6.1.4.1.6296.101.5.3.1.1.2
Interval time of counters (unit: seconds)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fiveSeconds(5), oneMinute(60), fifteenMinutes(900), oneDay(86400)  

slePortStatsOrder 1.3.6.1.4.1.6296.101.5.3.1.1.3
History sequence of counters (0: current)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..95  

slePortStatsUpPackets 1.3.6.1.4.1.6296.101.5.3.1.1.4
Upstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated packets per slePortStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsUpBytes 1.3.6.1.4.1.6296.101.5.3.1.1.5
Upstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated bytes per slePortStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsDownPackets 1.3.6.1.4.1.6296.101.5.3.1.1.6
Downstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated packets per slePortStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsDownBytes 1.3.6.1.4.1.6296.101.5.3.1.1.7
Downstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated bytes per slePortStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsControl 1.3.6.1.4.1.6296.101.5.3.2
OBJECT IDENTIFIER    

slePortStatsControlRequest 1.3.6.1.4.1.6296.101.5.3.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearPortStatistics(1), clearPortStatisticsAll(2)  

slePortStatsControlStatus 1.3.6.1.4.1.6296.101.5.3.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePortStatsControlTimer 1.3.6.1.4.1.6296.101.5.3.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePortStatsControlTimeStamp 1.3.6.1.4.1.6296.101.5.3.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePortStatsControlReqResult 1.3.6.1.4.1.6296.101.5.3.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePortStatsControlIndex 1.3.6.1.4.1.6296.101.5.3.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

slePortStatisticsNotification 1.3.6.1.4.1.6296.101.5.3.3
OBJECT IDENTIFIER    

slePortStatisticsCleared 1.3.6.1.4.1.6296.101.5.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortStatisticsAllCleared 1.3.6.1.4.1.6296.101.5.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortStatisticsAverageTable 1.3.6.1.4.1.6296.101.5.3.4
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortStatisticsAverageEntry

slePortStatisticsAverageEntry 1.3.6.1.4.1.6296.101.5.3.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortStatisticsAverageEntry  

slePortStatsAvgInterval 1.3.6.1.4.1.6296.101.5.3.4.1.1
Interval time of counters (unit: seconds)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fiveSeconds(5), oneMinute(60), tenMinutes(600)  

slePortStatsAvgTxPackets 1.3.6.1.4.1.6296.101.5.3.4.1.2
Average statistics of upstream traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgTxBytes 1.3.6.1.4.1.6296.101.5.3.4.1.3
Average statistics of upstream traffic calculated during slePortStatsAvgInterval seconds. Unit: bytes per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgTxUcastPackets 1.3.6.1.4.1.6296.101.5.3.4.1.4
Average statistics of upstream unicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgTxMcastPackets 1.3.6.1.4.1.6296.101.5.3.4.1.5
Average statistics of upstream multicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgTxBcastPackets 1.3.6.1.4.1.6296.101.5.3.4.1.6
Average statistics of upstream broadcast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgRxPackets 1.3.6.1.4.1.6296.101.5.3.4.1.7
Average statistics of downstream traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgRxBytes 1.3.6.1.4.1.6296.101.5.3.4.1.8
Average statistics of downstream traffic calculated during slePortStatsAvgInterval seconds. Unit: bytes per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgRxUcastPackets 1.3.6.1.4.1.6296.101.5.3.4.1.9
Average statistics of downstream unicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgRxMcastPackets 1.3.6.1.4.1.6296.101.5.3.4.1.10
Average statistics of downstream multicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatsAvgRxBcastPackets 1.3.6.1.4.1.6296.101.5.3.4.1.11
Average statistics of downstream broadcast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccTable 1.3.6.1.4.1.6296.101.5.3.5
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortStatisticsAccEntry

slePortStatisticsAccEntry 1.3.6.1.4.1.6296.101.5.3.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortStatisticsAccEntry  

slePortStatisticsAccHCIndex 1.3.6.1.4.1.6296.101.5.3.5.1.1
ifIndx
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

slePortStatisticsAccHCInUnicastPkts 1.3.6.1.4.1.6296.101.5.3.5.1.2
Rx unicast packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCInMulticastPkts 1.3.6.1.4.1.6296.101.5.3.5.1.3
Rx multicast packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCInBroadcastPkts 1.3.6.1.4.1.6296.101.5.3.5.1.4
Rx broadcast packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutUnicastPkts 1.3.6.1.4.1.6296.101.5.3.5.1.5
Tx unicast packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutMulticastPkts 1.3.6.1.4.1.6296.101.5.3.5.1.6
Tx multicast packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutBroadcastPkts 1.3.6.1.4.1.6296.101.5.3.5.1.7
Tx broadcast packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCInOctets 1.3.6.1.4.1.6296.101.5.3.5.1.8
Rx bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutOctets 1.3.6.1.4.1.6296.101.5.3.5.1.9
Tx bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutVlanTagPkts 1.3.6.1.4.1.6296.101.5.3.5.1.10
Tx VLAN tag counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCInPauseFrame 1.3.6.1.4.1.6296.101.5.3.5.1.11
IfInPauseFrame
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutPauseFrame 1.3.6.1.4.1.6296.101.5.3.5.1.12
IfOutPauseFrame
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCIpFwDatagrams 1.3.6.1.4.1.6296.101.5.3.5.1.13
IpFwDatagrams
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCIpInReceives 1.3.6.1.4.1.6296.101.5.3.5.1.14
IpInReceives
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCInDiscardsPkts 1.3.6.1.4.1.6296.101.5.3.5.1.15
Rx discards packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutDiscardsPkts 1.3.6.1.4.1.6296.101.5.3.5.1.16
Tx discards packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCInErrorsPkts 1.3.6.1.4.1.6296.101.5.3.5.1.17
Rx errors packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsAccHCOutErrorsPkts 1.3.6.1.4.1.6296.101.5.3.5.1.18
Tx errors packet counter
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPacketPerQueueTable 1.3.6.1.4.1.6296.101.5.3.6
slePortStatisticsPacketPerQueueTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortStatisticsPacketPerQueueEntry

slePortStatisticsPacketPerQueueEntry 1.3.6.1.4.1.6296.101.5.3.6.1
key: slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortStatisticsPacketPerQueueEntry  

slePortStatisticsPPQPortNum 1.3.6.1.4.1.6296.101.5.3.6.1.1
The Physical port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

slePortStatisticsPPQQueueNumber 1.3.6.1.4.1.6296.101.5.3.6.1.2
The Queue number (0~7)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

slePortStatisticsPPQPacketPassedCount 1.3.6.1.4.1.6296.101.5.3.6.1.3
The Packet Passed count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQOctetPassedCount 1.3.6.1.4.1.6296.101.5.3.6.1.4
The Packet Passed count expressed by bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQPacketDiscards 1.3.6.1.4.1.6296.101.5.3.6.1.5
The Packet discards count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQOctetDiscard 1.3.6.1.4.1.6296.101.5.3.6.1.6
The Packet discards expressed by bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQPacketNonUnicastDiscards 1.3.6.1.4.1.6296.101.5.3.6.1.7
Statistic of non-unicast packet dropped by queue (Unit: packet)
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQOctetNonUnicastDiscards 1.3.6.1.4.1.6296.101.5.3.6.1.8
Statistic of non-unicast packet dropped by queue (Unit: octet)
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQPacketUnicastDiscards 1.3.6.1.4.1.6296.101.5.3.6.1.9
Statistic of Unicast packet dropped by queue (Unit: packet)
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQOctetUnicastDiscards 1.3.6.1.4.1.6296.101.5.3.6.1.10
Statistic of Unicast packet dropped by queue (Unit: octet)
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQPktEnqueued 1.3.6.1.4.1.6296.101.5.3.6.1.11
current queuing packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPPQOctEnqueued 1.3.6.1.4.1.6296.101.5.3.6.1.12
current queuing packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePortStatisticsPacketPerQueueControl 1.3.6.1.4.1.6296.101.5.3.7
OBJECT IDENTIFIER    

slePortStatisticsPPQControlReqest 1.3.6.1.4.1.6296.101.5.3.7.1
The request of a user command 1. clearPortStatisticsPPQDropCounter
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearPortStatisticsPPQDropCounter(1), clearPPQStatQueue(2)  

slePortStatisticsPPQControlStatus 1.3.6.1.4.1.6296.101.5.3.7.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePortStatisticsPPQControlTimer 1.3.6.1.4.1.6296.101.5.3.7.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePortStatisticsPPQControlTimeStamp 1.3.6.1.4.1.6296.101.5.3.7.4
The time stamp of the last command (end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePortStatisticsPPQControlReqResult 1.3.6.1.4.1.6296.101.5.3.7.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePortStatisticsPPQControlPortNum 1.3.6.1.4.1.6296.101.5.3.7.6
Port number that user wants to clear
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

slePortStatisticsPPQControlQueueNumber 1.3.6.1.4.1.6296.101.5.3.7.7
Select queue that user wants to clear: 0. Queue 0 1. Queue 1 2. Queue 2 3. Queue 3 4. Queue 4 5. Queue 5 6. Queue 6 7. Queue 7 255. All queue
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER queue0(0), queue1(1), queue2(2), queue3(3), queue4(4), queue5(5), queue6(6), queue7(7), allQueue(255)  

slePortStatisticsPPQControlPacketType 1.3.6.1.4.1.6296.101.5.3.7.8
Choose type of packet: 1. Non-unicast 2. Unicast
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nonUnicast(1), unicast(2)  

sleCpuStatistics 1.3.6.1.4.1.6296.101.5.4
OBJECT IDENTIFIER    

sleCpuIntervalStatisticsTable 1.3.6.1.4.1.6296.101.5.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleCpuIntervalStatisticsEntry

sleCpuIntervalStatisticsEntry 1.3.6.1.4.1.6296.101.5.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleCpuIntervalStatisticsEntry  

sleCpuIntvlStatsPortIndex 1.3.6.1.4.1.6296.101.5.4.1.1.1
Port index of EthernetPort, only valid for physical ports.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sleCpuIntvlStatsInterval 1.3.6.1.4.1.6296.101.5.4.1.1.2
Interval time of counters (unit: seconds)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fiveSeconds(1), oneMinute(2), tenMinute(3)  

sleCpuIntvlStatsOrder 1.3.6.1.4.1.6296.101.5.4.1.1.3
History sequence of counters (0: current) (support only 0)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..95  

sleCpuIntvlStatsTxUcastPkts 1.3.6.1.4.1.6296.101.5.4.1.1.4
The Average value of the txUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsTxMcastPkts 1.3.6.1.4.1.6296.101.5.4.1.1.5
The Average value of the txMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsTxBcastPkts 1.3.6.1.4.1.6296.101.5.4.1.1.6
The Average value of the txBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsTxUcastBytes 1.3.6.1.4.1.6296.101.5.4.1.1.7
The Average value of the txUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsTxMcastBytes 1.3.6.1.4.1.6296.101.5.4.1.1.8
The Average value of the txMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsTxBcastBytes 1.3.6.1.4.1.6296.101.5.4.1.1.9
The Average value of the txBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsRxUcastPkts 1.3.6.1.4.1.6296.101.5.4.1.1.10
The Average value of the rxUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsRxMcastPkts 1.3.6.1.4.1.6296.101.5.4.1.1.11
The Average value of the rxMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsRxBcastPkts 1.3.6.1.4.1.6296.101.5.4.1.1.12
The Average value of the rxBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsRxUcastBytes 1.3.6.1.4.1.6296.101.5.4.1.1.13
The Average value of the rxUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsRxMcastBytes 1.3.6.1.4.1.6296.101.5.4.1.1.14
The Average value of the rxMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuIntvlStatsRxBcastBytes 1.3.6.1.4.1.6296.101.5.4.1.1.15
The Average value of the rxBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatisticsTable 1.3.6.1.4.1.6296.101.5.4.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleCpuStatisticsEntry

sleCpuStatisticsEntry 1.3.6.1.4.1.6296.101.5.4.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleCpuStatisticsEntry  

sleCpuStatsPortIndex 1.3.6.1.4.1.6296.101.5.4.2.1.1
Port index of EthernetPort, only valid for physical ports.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sleCpuStatsTxUcastPkts 1.3.6.1.4.1.6296.101.5.4.2.1.2
The Total value of the txUnicast that have been transmitted to CPU Unit : Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsTxMcastPkts 1.3.6.1.4.1.6296.101.5.4.2.1.3
The Total value of the txMulticast that have been transmitted to CPU Unit : Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsTxBcastPkts 1.3.6.1.4.1.6296.101.5.4.2.1.4
The Total value of the txBroadcast that have been transmitted to CPU Unit : Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsTxUcastBytes 1.3.6.1.4.1.6296.101.5.4.2.1.5
The Total value of the txUnicast that have been transmitted to CPU Unit : Bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsTxMcastBytes 1.3.6.1.4.1.6296.101.5.4.2.1.6
The Total value of the txMulticast that have been transmitted to CPU Unit : Bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsTxBcastBytes 1.3.6.1.4.1.6296.101.5.4.2.1.7
The Total value of the txBroadcast that have been transmitted to CPU Unit : Bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsRxUcastPkts 1.3.6.1.4.1.6296.101.5.4.2.1.8
The Total value of the rxUnicast that have been transmitted to CPU Unit : Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsRxMcastPkts 1.3.6.1.4.1.6296.101.5.4.2.1.9
The Total value of the rxMulticast that have been transmitted to CPU Unit : Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsRxBcastPkts 1.3.6.1.4.1.6296.101.5.4.2.1.10
The Total value of the rxBroadcast that have been transmitted to CPU Unit : Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsRxUcastBytes 1.3.6.1.4.1.6296.101.5.4.2.1.11
The Total value of the rxUnicast that have been transmitted to CPU Unit : Bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsRxMcastBytes 1.3.6.1.4.1.6296.101.5.4.2.1.12
The Total value of the rxMulticast that have been transmitted to CPU Unit : Bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatsRxBcastBytes 1.3.6.1.4.1.6296.101.5.4.2.1.13
The Total value of the trMulticast that have been transmitted to CPU Unit : Bytes
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleCpuStatisticsControl 1.3.6.1.4.1.6296.101.5.4.3
OBJECT IDENTIFIER    

sleCpuStatsControlReqest 1.3.6.1.4.1.6296.101.5.4.3.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearCpuStatistics(1)  

sleCpuStatsControlStatus 1.3.6.1.4.1.6296.101.5.4.3.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleCpuStatsControlTimer 1.3.6.1.4.1.6296.101.5.4.3.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleCpuStatsControlTimeStamp 1.3.6.1.4.1.6296.101.5.4.3.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleCpuStatsControlReqResult 1.3.6.1.4.1.6296.101.5.4.3.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleCpuStatsControlIndex 1.3.6.1.4.1.6296.101.5.4.3.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

sleCpuStatisticsNotification 1.3.6.1.4.1.6296.101.5.4.4
OBJECT IDENTIFIER    

sleCpuStatisticsCleared 1.3.6.1.4.1.6296.101.5.4.4.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePerformanceBase 1.3.6.1.4.1.6296.101.5.5
OBJECT IDENTIFIER    

slePerformanceBaseInfo 1.3.6.1.4.1.6296.101.5.5.1
OBJECT IDENTIFIER    

slePerformanceBaseProtoStatsEnable 1.3.6.1.4.1.6296.101.5.5.1.1
The admin status of gathering each protocol statistics
Status: current Access: read-only
OBJECT-TYPE    
  BITS arp(0), ip(1), icmp(2), tcp(3), udp(4)  

slePerformanceBaseCpuPpsStatus 1.3.6.1.4.1.6296.101.5.5.1.2
The Cpu PPS status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slePerformanceBaseCpuPpsThreshold 1.3.6.1.4.1.6296.101.5.5.1.3
The CPU PPS threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

slePerformanceBaseCpuPpsAvg 1.3.6.1.4.1.6296.101.5.5.1.4
The CPU PPS average.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

slePerformanceBaseControl 1.3.6.1.4.1.6296.101.5.5.2
OBJECT IDENTIFIER    

slePerformanceBaseControlRequest 1.3.6.1.4.1.6296.101.5.5.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setProtocolStatsEnable(1), setPsetCpuPpsProfile(2)  

slePerformanceBaseControlStatus 1.3.6.1.4.1.6296.101.5.5.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePerformanceBaseControlTimer 1.3.6.1.4.1.6296.101.5.5.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePerformanceBaseControlTimeStamp 1.3.6.1.4.1.6296.101.5.5.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePerformanceBaseControlReqResult 1.3.6.1.4.1.6296.101.5.5.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePerformanceBaseControlProtoStatsEnable 1.3.6.1.4.1.6296.101.5.5.2.6
The admin status of gathering each protocol statistics
Status: current Access: read-write
OBJECT-TYPE    
  BITS arp(0), ip(1), icmp(2), tcp(3), udp(4)  

slePerformanceBaseControlCpuPpsStatus 1.3.6.1.4.1.6296.101.5.5.2.7
The Cpu PPS status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slePerformanceBaseControlCpuPpsThreshold 1.3.6.1.4.1.6296.101.5.5.2.8
The CPU PPS threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

slePerformanceBaseNotification 1.3.6.1.4.1.6296.101.5.5.3
OBJECT IDENTIFIER    

slePerformanceBaseProtoStatsChanged 1.3.6.1.4.1.6296.101.5.5.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePerformanceBaseCpuPpsProfileChanged 1.3.6.1.4.1.6296.101.5.5.3.2
setPsetCpuPpsProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSfpmonThreshold 1.3.6.1.4.1.6296.101.5.6
OBJECT IDENTIFIER    

sleSfpmonThresholdTable 1.3.6.1.4.1.6296.101.5.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSfpmonThresholdEntry

sleSfpmonThresholdEntry 1.3.6.1.4.1.6296.101.5.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSfpmonThresholdEntry  

sleSfpmonThresholdIndex 1.3.6.1.4.1.6296.101.5.6.1.1.1
port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

sleSfpmonWarnTxPowerLow 1.3.6.1.4.1.6296.101.5.6.1.1.2
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnTxPowerHigh 1.3.6.1.4.1.6296.101.5.6.1.1.3
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnTxPowerDuration 1.3.6.1.4.1.6296.101.5.6.1.1.4
Duration-time units by the 10 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleSfpmonWarnRxPowerLow 1.3.6.1.4.1.6296.101.5.6.1.1.5
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnRxPowerHigh 1.3.6.1.4.1.6296.101.5.6.1.1.6
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnRxPowerDuration 1.3.6.1.4.1.6296.101.5.6.1.1.7
Duration-time units by the 10 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleSfpmonAlarmTxPowerLow 1.3.6.1.4.1.6296.101.5.6.1.1.8
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmTxPowerHigh 1.3.6.1.4.1.6296.101.5.6.1.1.9
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmTxPowerDuration 1.3.6.1.4.1.6296.101.5.6.1.1.10
Duration-time units by the 10 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleSfpmonAlarmRxPowerLow 1.3.6.1.4.1.6296.101.5.6.1.1.11
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmRxPowerHigh 1.3.6.1.4.1.6296.101.5.6.1.1.12
The Power threshold -40~8,1647 (dBm) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmRxPowerDuration 1.3.6.1.4.1.6296.101.5.6.1.1.13
Duration-time units by the 10 sec
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleSfpmonWarnTxbiasLow 1.3.6.1.4.1.6296.101.5.6.1.1.14
The Txbias Threshold 0~131(mA) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..131  

sleSfpmonWarnTxbiasHigh 1.3.6.1.4.1.6296.101.5.6.1.1.15
The Txbias Threshold 0~131(mA) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..131  

sleSfpmonAlarmTxbiasLow 1.3.6.1.4.1.6296.101.5.6.1.1.16
The Txbias Threshold 0~131(mA) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..131  

sleSfpmonAlarmTxbiasHigh 1.3.6.1.4.1.6296.101.5.6.1.1.17
The Txbias Threshold 0~131(mA) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..131  

sleSfpmonWarnTemperLow 1.3.6.1.4.1.6296.101.5.6.1.1.18
The Temperature threshold -128~127.99(C) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnTemperHigh 1.3.6.1.4.1.6296.101.5.6.1.1.19
The Temperature threshold -128~127.99(C) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmTemperLow 1.3.6.1.4.1.6296.101.5.6.1.1.20
The Temperature threshold -128~127.99(C) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmTemperHigh 1.3.6.1.4.1.6296.101.5.6.1.1.21
The Temperature threshold -128~127.99(C) It must be devided by 10000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnVoltageLow 1.3.6.1.4.1.6296.101.5.6.1.1.22
The Voltage threshold 0~6.5535(V) It must be devided by 10000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnVoltageHigh 1.3.6.1.4.1.6296.101.5.6.1.1.23
The Voltage threshold 0~6.5535(V) It must be devided by 10000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmVoltageLow 1.3.6.1.4.1.6296.101.5.6.1.1.24
The Voltage threshold 0~6.5535(V) It must be devided by 10000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonAlarmVoltageHigh 1.3.6.1.4.1.6296.101.5.6.1.1.25
The Voltage threshold 0~6.5535(V) It must be devided by 10000
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSfpmonWarnTxPowerMode 1.3.6.1.4.1.6296.101.5.6.1.1.26
The module threshold operational mode (1:on, 0:off)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonAlarmTxPowerMode 1.3.6.1.4.1.6296.101.5.6.1.1.27
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonWarnRxPowerMode 1.3.6.1.4.1.6296.101.5.6.1.1.28
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonAlarmRxPowerMode 1.3.6.1.4.1.6296.101.5.6.1.1.29
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonWarnTxbiasMode 1.3.6.1.4.1.6296.101.5.6.1.1.30
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonAlarmTxbiasMode 1.3.6.1.4.1.6296.101.5.6.1.1.31
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonWarnTemperMode 1.3.6.1.4.1.6296.101.5.6.1.1.32
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonAlarmTemperMode 1.3.6.1.4.1.6296.101.5.6.1.1.33
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonWarnVoltageMode 1.3.6.1.4.1.6296.101.5.6.1.1.34
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonAlarmVoltageMode 1.3.6.1.4.1.6296.101.5.6.1.1.35
The module threshold mode 0: default mode 1: admin mode 2: operational mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), admin(1), oper(2)  

sleSfpmonThresholdControl 1.3.6.1.4.1.6296.101.5.6.2
OBJECT IDENTIFIER    

sleSfpmonThresholdControlRequest 1.3.6.1.4.1.6296.101.5.6.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSfpmonThresholdWarnTxPower(1), setSfpmonThresholdWarnRxPower(2), setSfpmonThresholdAlarmTxPower(3), setSfpmonThresholdAlarmRxPower(4), clearSfpmonThresholdWarnTxPower(5), clearSfpmonThresholdWarnRxPower(6), clearSfpmonThresholdAlarmTxPower(7), clearSfpmonThresholdAlarmRxPower(8), setSfpmonThresholdWarnTxbias(9), setSfpmonThresholdAlarmTxbias(10), clearSfpmonThresholdWarnTxbias(11), clearSfpmonThresholdAlarmTxbias(12), setSfpmonThresholdWarnTemper(13), setSfpmonThresholdAlarmTemper(14), clearSfpmonThresholdWarnTemper(15), clearSfpmonThresholdAlarmTemper(16), setSfpmonThresholdWarnVoltage(17), setSfpmonThresholdAlarmVoltage(18), clearSfpmonThresholdWarnVoltage(19), clearSfpmonThresholdAlarmVoltage(20)  

sleSfpmonThresholdControlStatus 1.3.6.1.4.1.6296.101.5.6.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSfpmonThresholdControlTimer 1.3.6.1.4.1.6296.101.5.6.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSfpmonThresholdControlTimeStamp 1.3.6.1.4.1.6296.101.5.6.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSfpmonThresholdControlReqResult 1.3.6.1.4.1.6296.101.5.6.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSfpmonThresholdControlIndex 1.3.6.1.4.1.6296.101.5.6.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleSfpmonThresholdControlPowerLow 1.3.6.1.4.1.6296.101.5.6.2.7
Power threshold in dBm -40 ~ 8.1647 (dBm) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlPowerHigh 1.3.6.1.4.1.6296.101.5.6.2.8
Power threshold in dBm -40 ~ 8.1647 (dBm) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlPowerDuration 1.3.6.1.4.1.6296.101.5.6.2.9
Duration-time units by the 10 sec
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..300  

sleSfpmonThresholdControlTxbiasLow 1.3.6.1.4.1.6296.101.5.6.2.10
The Txbias 0~131 (mA) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlTxbiasHigh 1.3.6.1.4.1.6296.101.5.6.2.11
The Txbias 0~131 (mA) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlTemperLow 1.3.6.1.4.1.6296.101.5.6.2.12
The Temperature threshold 0~131 (mA) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlTemperHigh 1.3.6.1.4.1.6296.101.5.6.2.13
The Temperature threshold 0~131 (mA) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlVoltageLow 1.3.6.1.4.1.6296.101.5.6.2.14
The voltage threshold 0~6.5535 (V) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlVoltageHigh 1.3.6.1.4.1.6296.101.5.6.2.15
The voltage threshold 0~6.5535 (V) It must be multiplied by 10000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSfpmonThresholdControlMode 1.3.6.1.4.1.6296.101.5.6.2.16
The module threshold mode 1: admin mode 2: operational mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER admin(1), oper(2)  

sleSfpmonThresholdNotification 1.3.6.1.4.1.6296.101.5.6.3
OBJECT IDENTIFIER    

sleSfpmonThresholdPowerChanged 1.3.6.1.4.1.6296.101.5.6.3.1
setSfpmonThresholdWarnTxPower setSfpmonThresholdWarnRxPower setSfpmonThresholdAlarmTxPower setSfpmonThresholdAlarmRxPower clearSfpmonThresholdWarnTxPower clearSfpmonThresholdWarnRxPower clearSfpmonThresholdAlarmTxPower clearSfpmonThresholdAlarmRxPower
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSfpmonThresholdTxbiasChanged 1.3.6.1.4.1.6296.101.5.6.3.2
setSfpmonThresholdWarnTxbias setSfpmonThresholdAlarmTxbias clearSfpmonThresholdWarnTxbias clearSfpmonThresholdAlarmTxbias
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSfpmonThresholdTemperChanged 1.3.6.1.4.1.6296.101.5.6.3.3
setSfpmonThresholdWarnTemper setSfpmonThresholdAlarmTemper clearSfpmonThresholdWarnTemper clearSfpmonThresholdAlarmTemper
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSfpmonThresholdVoltageChanged 1.3.6.1.4.1.6296.101.5.6.3.4
setSfpmonThresholdWarnVoltage setSfpmonThresholdAlarmVoltage clearSfpmonThresholdWarnVoltage clearSfpmonThresholdAlarmVoltage
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVlanStatistics 1.3.6.1.4.1.6296.101.5.7
OBJECT IDENTIFIER    

sleVlanStatisticsTable 1.3.6.1.4.1.6296.101.5.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVlanStatisticsEntry

sleVlanStatisticsEntry 1.3.6.1.4.1.6296.101.5.7.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVlanStatisticsEntry  

sleVlanStatisticsIndex 1.3.6.1.4.1.6296.101.5.7.1.1.1
The VLAN index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

sleVlanStatisticsIngressBytes 1.3.6.1.4.1.6296.101.5.7.1.1.2
Bytes that ingress on the VLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleVlanStatisticsEgressBytes 1.3.6.1.4.1.6296.101.5.7.1.1.3
Bytes that egress on the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleVlanStatisticsIngressPackets 1.3.6.1.4.1.6296.101.5.7.1.1.4
Packets that ingress on the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleVlanStatisticsEgressPackets 1.3.6.1.4.1.6296.101.5.7.1.1.5
Packets that egress on the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleVlanStatisticsControl 1.3.6.1.4.1.6296.101.5.7.2
OBJECT IDENTIFIER    

sleVlanStatisticsControlRequest 1.3.6.1.4.1.6296.101.5.7.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearVlanStatistics(1), clearVlanStatisticsAll(2)  

sleVlanStatisticsControlStatus 1.3.6.1.4.1.6296.101.5.7.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVlanStatisticsControlTimer 1.3.6.1.4.1.6296.101.5.7.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVlanStatisticsControlTimeStamp 1.3.6.1.4.1.6296.101.5.7.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVlanStatisticsControlReqResult 1.3.6.1.4.1.6296.101.5.7.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVlanStatisticsControlIndex 1.3.6.1.4.1.6296.101.5.7.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

sleVlanStatisticsNotification 1.3.6.1.4.1.6296.101.5.7.3
OBJECT IDENTIFIER    

sleVlanStatisticsCleared 1.3.6.1.4.1.6296.101.5.7.3.1
Clear VLAN statistics
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVlanStatisticsAllCleared 1.3.6.1.4.1.6296.101.5.7.3.2
Clear all VLANs statistics
Status: current Access: read-write
NOTIFICATION-TYPE    

slePhyStat 1.3.6.1.4.1.6296.101.5.8
OBJECT IDENTIFIER    

slePhyInternalStatTable 1.3.6.1.4.1.6296.101.5.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePhyInternalStatEntry

slePhyInternalStatEntry 1.3.6.1.4.1.6296.101.5.8.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePhyInternalStatEntry  

slePhyInternalStatIndex 1.3.6.1.4.1.6296.101.5.8.1.1.1
The interface index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

slePhyExternalStatTable 1.3.6.1.4.1.6296.101.5.8.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePhyExternalStatEntry

slePhyExternalStatEntry 1.3.6.1.4.1.6296.101.5.8.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePhyExternalStatEntry  

slePhyExternalStatIfIndex 1.3.6.1.4.1.6296.101.5.8.2.1.1
The interface index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

slePhyExternalStatEtherStatsCRCAlignErrors 1.3.6.1.4.1.6296.101.5.8.2.1.35
Ether Stats CRC Align Errors
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePhyExternalStatRxMacDiscards 1.3.6.1.4.1.6296.101.5.8.2.1.49
Rx Mac Discards
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePhyExternalStatIdleError 1.3.6.1.4.1.6296.101.5.8.2.1.50
Idle Error
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slePhyStatControl 1.3.6.1.4.1.6296.101.5.8.3
OBJECT IDENTIFIER    

slePhyStatControlRequest 1.3.6.1.4.1.6296.101.5.8.3.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearPhyStats(1)  

slePhyStatControlStatus 1.3.6.1.4.1.6296.101.5.8.3.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePhyStatControlTimer 1.3.6.1.4.1.6296.101.5.8.3.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePhyStatControlTimeStamp 1.3.6.1.4.1.6296.101.5.8.3.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePhyStatControlReqResult 1.3.6.1.4.1.6296.101.5.8.3.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePhyStatControlIfIndex 1.3.6.1.4.1.6296.101.5.8.3.6
The interface index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2147483647  

slePerformanceMgmtGroup 1.3.6.1.4.1.6296.101.5.9
Description.
Status: current Access: read-write
OBJECT-GROUP    

slePerformancdMgmtNotificationGroup 1.3.6.1.4.1.6296.101.5.10
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor