SLE-MPLS-TP-PW-STATISTICS-MIB

File: SLE-MPLS-TP-PW-STATISTICS-MIB.mib (5714 bytes)

Imported modules

DASAN-SMI PW-TC-STD-MIB SLE-TC-MIB
SNMP-FRAMEWORK-MIB SNMPv2-SMI

Imported symbols

sleMgmt PwIDType SleControlStatusType
SleControlRequestResultType SnmpAdminString zeroDotZero
TimeTicks Unsigned32 Gauge32
Counter64 OBJECT-TYPE MODULE-IDENTITY

Defined Types

SleMplsTpPwStatsInfoEntry  
SEQUENCE    
  sleMplsTpPwStatsInfoPwId PwIDType
  sleMplsTpPwStatsInfoPwName SnmpAdminString
  sleMplsTpPwStatsInfoTxPkts Counter64
  sleMplsTpPwStatsInfoRxPkts Counter64
  sleMplsTpPwStatsInfoTxBytes Counter64
  sleMplsTpPwStatsInfoRxBytes Counter64

Defined Values

sleMplsTpPwStats 1.3.6.1.4.1.6296.101.16.21
This mib contains the managed objects for PW statistics. It shows the statistics of the PW from it created. Will display only on the PE.
MODULE-IDENTITY    

sleMpls 1.3.6.1.4.1.6296.101.16
OBJECT IDENTIFIER    

sleMplsTpPwStatsTable 1.3.6.1.4.1.6296.101.16.21.1
OBJECT IDENTIFIER    

sleMplsTpPwStatsInfoTable 1.3.6.1.4.1.6296.101.16.21.1.1
This table contains information about the PW statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleMplsTpPwStatsInfoEntry

sleMplsTpPwStatsInfoEntry 1.3.6.1.4.1.6296.101.16.21.1.1.1
An entry in this table represents the statistics of PW. The PW created by network administator or SNMP agent as instructed by the MPLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleMplsTpPwStatsInfoEntry  

sleMplsTpPwStatsInfoPwId 1.3.6.1.4.1.6296.101.16.21.1.1.1.1
Pw ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  PwIDType 1..65535  

sleMplsTpPwStatsInfoPwName 1.3.6.1.4.1.6296.101.16.21.1.1.1.2
This object is displaying PW NAME.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

sleMplsTpPwStatsInfoTxPkts 1.3.6.1.4.1.6296.101.16.21.1.1.1.3
Transmitted packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleMplsTpPwStatsInfoRxPkts 1.3.6.1.4.1.6296.101.16.21.1.1.1.4
Received packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleMplsTpPwStatsInfoTxBytes 1.3.6.1.4.1.6296.101.16.21.1.1.1.5
Transmitted bytes count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleMplsTpPwStatsInfoRxBytes 1.3.6.1.4.1.6296.101.16.21.1.1.1.6
Received bytes count
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleMplsTpPwStatsControl 1.3.6.1.4.1.6296.101.16.21.1.2
OBJECT IDENTIFIER    

sleMplsTpPwStatsControlRequest 1.3.6.1.4.1.6296.101.16.21.1.2.1
This object holds the possible read-write columns that can be modified in the Vrf table. For each read-write column of Vrf table, a Set Operation control value is added in this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setToClearPwStats(1)  

sleMplsTpPwStatsControlStatus 1.3.6.1.4.1.6296.101.16.21.1.2.2
This object displays the status of the configuration done.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleMplsTpPwStatsControlTimer 1.3.6.1.4.1.6296.101.16.21.1.2.3
This object is based on the SLE style where a timer is configured for every control table.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleMplsTpPwStatsControlTimeStamp 1.3.6.1.4.1.6296.101.16.21.1.2.4
This object specifies the time at which the configuration is done.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleMplsTpPwStatsReqResult 1.3.6.1.4.1.6296.101.16.21.1.2.5
The standard result of the SET operation is stored here.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleMplsTpPwStatsControlPwId 1.3.6.1.4.1.6296.101.16.21.1.2.6
PW index. Index zero to clear all the VPWS statistics. Greater than zero to clear the specific VPWS statistics.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32