SL-ROADM-MIB

File: SL-ROADM-MIB.mib (10968 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB SL-NE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE Gauge32 Counter64
DisplayString TruthValue DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
InterfaceIndex slService

Defined Types

ROCHProvisioningType  
The channel provisioning type.
TEXTUAL-CONVENTION    
  INTEGER none(1), exp(2), add(3)  

SlWSSConfigEntry  
SEQUENCE    
  slWSSConfigLineIndex InterfaceIndex
  slWSSConfigOperStatus INTEGER
  slWSSConfigSwitchTemp INTEGER
  slWSSConfigBoardTemp INTEGER
  slWSSConfigCaseTemp INTEGER
  slWSSConfigUptime INTEGER
  slWSSConfigComFirstWl INTEGER
  slWSSConfigComChCount INTEGER
  slWSSConfigPowerLevel INTEGER
  slWSSConfigAttenLevel INTEGER
  slWSSConfigEqualizationThreshLevel INTEGER
  slWSSConfigEqualizationMethod INTEGER
  slWSSConfigSpacing INTEGER

SlROCHConfigEntry  
SEQUENCE    
  slROCHConfigLineIndex InterfaceIndex
  slROCHConfigProvisioning ROCHProvisioningType
  slROCHConfigInPowerLevel INTEGER
  slROCHConfigOutPowerLevel INTEGER
  slROCHConfigChannelDetect INTEGER
  slROCHConfigChPowerFailHighThresh INTEGER
  slROCHConfigChPowerFailLowThresh INTEGER
  slROCHConfigChPowerDegHighThresh INTEGER
  slROCHConfigChPowerDegLowThresh INTEGER
  slROCHConfigChPowerHystHighThresh INTEGER
  slROCHConfigChPowerHystLowThresh INTEGER
  slROCHConfigChAlias DisplayString
  slROCHConfigChAliasSmm DisplayString
  slROCHConfigProvisioningNew INTEGER

Defined Values

slROADM 1.3.6.1.4.1.4515.1.1.16
This MIB module describes the ROADM
MODULE-IDENTITY    

slROADMConfig 1.3.6.1.4.1.4515.1.1.16.1
OBJECT IDENTIFIER    

slROADMPm 1.3.6.1.4.1.4515.1.1.16.2
OBJECT IDENTIFIER    

slROADMTraps 1.3.6.1.4.1.4515.1.1.16.3
OBJECT IDENTIFIER    

slWSSConfigTable 1.3.6.1.4.1.4515.1.1.16.1.1
The ROADM Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlWSSConfigEntry

slWSSConfigEntry 1.3.6.1.4.1.4515.1.1.16.1.1.1
An entry in the WSS Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlWSSConfigEntry  

slWSSConfigLineIndex 1.3.6.1.4.1.4515.1.1.16.1.1.1.1
Only one entry in the table. Thus this is a dummy ifIndex that equals to 1.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

slWSSConfigOperStatus 1.3.6.1.4.1.4515.1.1.16.1.1.1.2
The WSS operational status. 0 - DOWN, 1 - UP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigSwitchTemp 1.3.6.1.4.1.4515.1.1.16.1.1.1.3
The switch temperature in 0.1 celsius
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigBoardTemp 1.3.6.1.4.1.4515.1.1.16.1.1.1.4
The board temperature in 0.1 celsius
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigCaseTemp 1.3.6.1.4.1.4515.1.1.16.1.1.1.5
The case temperature in 0.1 celsius
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigUptime 1.3.6.1.4.1.4515.1.1.16.1.1.1.6
The case temperature in 0.1 celsius
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigComFirstWl 1.3.6.1.4.1.4515.1.1.16.1.1.1.7
The channel number
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slWSSConfigComChCount 1.3.6.1.4.1.4515.1.1.16.1.1.1.8
The overall count of channels in the Waveplan. The channels are ordered in increasing frequency (decreasing wavelength).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slWSSConfigPowerLevel 1.3.6.1.4.1.4515.1.1.16.1.1.1.9
The received Destination Access Point Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigAttenLevel 1.3.6.1.4.1.4515.1.1.16.1.1.1.10
The received Source Access Point Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slWSSConfigEqualizationThreshLevel 1.3.6.1.4.1.4515.1.1.16.1.1.1.11
The equalization threshold level. In manual mode if the TX power is below this threshold an alarm is declared against this channel. Legal values are -8dBm to -23dBm (default -13dBm).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slWSSConfigEqualizationMethod 1.3.6.1.4.1.4515.1.1.16.1.1.1.12
The equalization method: 1 - manual equlization to predefined value (default mode). 2 - automatic equlization
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(1), auto(2)  

slWSSConfigSpacing 1.3.6.1.4.1.4515.1.1.16.1.1.1.13
The spacing supported by the ROADM.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER s100G(1), s50G(2)  

slROCHConfigTable 1.3.6.1.4.1.4515.1.1.16.1.2
The ROADM Channel Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlROCHConfigEntry

slROCHConfigEntry 1.3.6.1.4.1.4515.1.1.16.1.2.1
An entry in the ROADM Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlROCHConfigEntry  

slROCHConfigLineIndex 1.3.6.1.4.1.4515.1.1.16.1.2.1.1
The ifIndex of the channel. Channels 1-100 for the 100 GHz spacing cannels (e.g. 17 for CH17). Channels 101-200 for the 50 GHz spacing channels (e.g. 117 for CH 17.5).
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

slROCHConfigProvisioning 1.3.6.1.4.1.4515.1.1.16.1.2.1.2
The channel provisioning
Status: current Access: read-write
OBJECT-TYPE    
  ROCHProvisioningType  

slROCHConfigInPowerLevel 1.3.6.1.4.1.4515.1.1.16.1.2.1.3
The Power Level of the channel equal to Out Power Level + Attenuation
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slROCHConfigOutPowerLevel 1.3.6.1.4.1.4515.1.1.16.1.2.1.4
The Output Power Level of the channel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slROCHConfigChannelDetect 1.3.6.1.4.1.4515.1.1.16.1.2.1.5
Channel detect indication. 0 - not detected, 1 - channel is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slROCHConfigChPowerFailHighThresh 1.3.6.1.4.1.4515.1.1.16.1.2.1.6
The threshold for channel High Power Failure. Setting this value applies to all channels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slROCHConfigChPowerFailLowThresh 1.3.6.1.4.1.4515.1.1.16.1.2.1.7
The threshold for channel Low Power Failure. Setting this value applies to all channels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slROCHConfigChPowerDegHighThresh 1.3.6.1.4.1.4515.1.1.16.1.2.1.8
The threshold for channel High Power Degrade. Setting this value applies to all channels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slROCHConfigChPowerDegLowThresh 1.3.6.1.4.1.4515.1.1.16.1.2.1.9
The threshold for channel Low Power Degrade. Setting this value applies to all channels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slROCHConfigChPowerHystHighThresh 1.3.6.1.4.1.4515.1.1.16.1.2.1.10
The threshold for channel High Power Hysteresis. Setting this value applies to all channels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slROCHConfigChPowerHystLowThresh 1.3.6.1.4.1.4515.1.1.16.1.2.1.11
The threshold for channel Low Power Hysteresis. Setting this value applies to all channels.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

slROCHConfigChAlias 1.3.6.1.4.1.4515.1.1.16.1.2.1.12
The alias for the channel. The dfault is the empty string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

slROCHConfigChAliasSmm 1.3.6.1.4.1.4515.1.1.16.1.2.1.13
The alias for the channel as given by the SMM. The dfault is the empty string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

slROCHConfigProvisioningNew 1.3.6.1.4.1.4515.1.1.16.1.2.1.14
The channel provisioning. A bitmask with each bit for the corresponding port. Bit n ON means that the channel is added/dropped from/to port number n+1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER