SL-OSW-MIB

File: SL-OSW-MIB.mib (2549 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB SL-NE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE Gauge32 Counter64
DisplayString TruthValue DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
InterfaceIndex slService

Defined Types

SlOSWPortConfigEntry  
SEQUENCE    
  slOSWPortConfigLineIndex InterfaceIndex
  slOSWPortConfigInPowerLevel INTEGER
  slOSWPortConfigLosThreshold INTEGER

Defined Values

slOSW 1.3.6.1.4.1.4515.1.1.17
This MIB module describes the Optical Switch
MODULE-IDENTITY    

slOSWConfig 1.3.6.1.4.1.4515.1.1.17.1
OBJECT IDENTIFIER    

slOSWPm 1.3.6.1.4.1.4515.1.1.17.2
OBJECT IDENTIFIER    

slOSWTraps 1.3.6.1.4.1.4515.1.1.17.3
OBJECT IDENTIFIER    

slOSWPortConfigTable 1.3.6.1.4.1.4515.1.1.17.1.1
The OSW Port Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlOSWPortConfigEntry

slOSWPortConfigEntry 1.3.6.1.4.1.4515.1.1.17.1.1.1
An entry in the OSW ports configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlOSWPortConfigEntry  

slOSWPortConfigLineIndex 1.3.6.1.4.1.4515.1.1.17.1.1.1.1
The ifIndex of the port.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

slOSWPortConfigInPowerLevel 1.3.6.1.4.1.4515.1.1.17.1.1.1.2
The Input Power Level of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slOSWPortConfigLosThreshold 1.3.6.1.4.1.4515.1.1.17.1.1.1.3
Configured threshold value for LOS detection of the optical switch port. The value given in 0.1 dBm units. The range starts with -50.0 dBm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535