SHIVA-L2F-MIB
File:
SHIVA-L2F-MIB.mib (29351 bytes)
Imported modules
Imported symbols
Defined Types
| L2fHGConfTunnelEntry |
|
| SEQUENCE |
|
|
|
| |
l2fHGConfTunnelNASName |
DisplayString |
|
| |
l2fHGConfTunnelHGName |
DisplayString |
|
| |
l2fHGConfTunnelSectionNumber |
INTEGER |
|
| |
l2fHGConfTunnelEnabled |
INTEGER |
|
| L2fHGPeerEntry |
|
| SEQUENCE |
|
|
|
| |
l2fHGPeerIfIndex |
INTEGER |
|
| |
l2fHGPeerEnabled |
INTEGER |
|
| |
l2fHGPeerNASName |
DisplayString |
|
| |
l2fHGPeerCurrentTunnels |
INTEGER |
|
| |
l2fHGPeerPeakTunnels |
Counter |
|
| |
l2fHGPeerTotalTunnels |
Counter |
|
| |
l2fHGPeerCurrentClients |
INTEGER |
|
| |
l2fHGPeerPeakClients |
Counter |
|
| |
l2fHGPeerTotalClients |
Counter |
|
| |
l2fHGPeerTunnelAuthFailed |
Counter |
|
| |
l2fHGPeerTunnelMiscFailed |
Counter |
|
| |
l2fHGPeerTunnelKeepAliveFailed |
Counter |
|
| |
l2fHGPeerTunnelProtocolViolations |
Counter |
|
| |
l2fHGPeerTunnelLastCloseTime |
TimeTicks |
|
| L2fHGTunnelEntry |
|
| SEQUENCE |
|
|
|
| |
l2fHGTunnelCLID |
INTEGER |
|
| |
l2fHGTunnelPeerCLID |
INTEGER |
|
| |
l2fHGTunnelHGName |
DisplayString |
|
| |
l2fHGTunnelNASName |
DisplayString |
|
| |
l2fHGTunnelReceiveChecksum |
INTEGER |
|
| |
l2fHGTunnelGenerateChecksum |
INTEGER |
|
| |
l2fHGTunnelIfIndex |
INTEGER |
|
| |
l2fHGTunnelPeerIndex |
INTEGER |
|
| |
l2fHGTunnelTransport |
INTEGER |
|
| |
l2fHGTunnelIpAddress |
IpAddress |
|
| |
l2fHGTunnelCurrentState |
INTEGER |
|
| |
l2fHGTunnelCurrentClients |
INTEGER |
|
| |
l2fHGTunnelPeakClients |
Counter |
|
| |
l2fHGTunnelTotalClients |
Counter |
|
| |
l2fHGTunnelMaxLinkInactivity |
INTEGER |
|
| |
l2fHGTunnelCurrentLinkInactivity |
INTEGER |
|
| |
l2fHGTunnelSequenceErrors |
Counter |
|
| |
l2fHGTunnelEchoSent |
Counter |
|
| |
l2fHGTunnelEchoReceived |
Counter |
|
| |
l2fHGTunnelEchoReplySent |
Counter |
|
| |
l2fHGTunnelEchoReplyReceived |
Counter |
|
| L2fHGClientEntry |
|
| SEQUENCE |
|
|
|
| |
l2fHGClientCLID |
INTEGER |
|
| |
l2fHGClientMID |
INTEGER |
|
| |
l2fHGClientPeerCLID |
INTEGER |
|
| |
l2fHGClientTunnelState |
INTEGER |
|
| |
l2fHGClientIfIndex |
INTEGER |
|
| |
l2fHGClientOpenName |
DisplayString |
|
| |
l2fHGClientReqLcp0 |
OCTET STRING |
|
| |
l2fHGClientAckLcp1 |
OCTET STRING |
|
| |
l2fHGClientAckLcp2 |
OCTET STRING |
|
| |
l2fHGClientOpenType |
INTEGER |
|
| |
l2fHGClientSequenceEnabled |
INTEGER |
|
| |
l2fHGClientSequenceErrors |
Counter |
|
Defined Values
| l2fHGConf |
1.3.6.1.4.1.166.1.26.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| l2fHGConfEnabled |
1.3.6.1.4.1.166.1.26.2.1.1 |
| Whether L2F Home Gateway functionality is enabled
on this system. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGConfMaximumCalls |
1.3.6.1.4.1.166.1.26.2.1.2 |
| The maximum number of incoming L2F calls that may be
active on this Home Gateway at any one time. Any attempt
to create a call in excess if this number will be
rejected. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGConfUDPEnabled |
1.3.6.1.4.1.166.1.26.2.1.3 |
| Whether L2F Home Gateway functionality is enabled
over the UDP protocol on port 1701 on this system. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGConfNASDefined |
1.3.6.1.4.1.166.1.26.2.1.4 |
| Indicates the number of peer NASs which have been configured
on this Home Gateway. This value represents the number of
NAS entries in the configuration table (ie. number of
VPDNInterface sections). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGConfInactivityRetries |
1.3.6.1.4.1.166.1.26.2.1.5 |
| Indicates the number of times this Home Gateway will send
L2F_ECHO packets without receiving a response, that is,
an L2F_ECHO_REPLY from the NAS peer before determining
the tunnel is no longer active. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGConfInactivityRetryPeriod |
1.3.6.1.4.1.166.1.26.2.1.6 |
| Indicates the number seconds that must elapse since the
last NAS peer packet was received by this Home Gateway
before an L2F_ECHO packet is generated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGConfTunnelTable |
1.3.6.1.4.1.166.1.26.2.1.8 |
| Table of configuration information for each
incoming VPDN tunnel. The table is indexed by NAS name. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
L2fHGConfTunnelEntry |
|
| l2fHGConfTunnelEntry |
1.3.6.1.4.1.166.1.26.2.1.8.1 |
| Configuration information for a particular VPDN tunnel. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
L2fHGConfTunnelEntry |
|
|
| l2fHGConfTunnelNASName |
1.3.6.1.4.1.166.1.26.2.1.8.1.1 |
| Name of NAS that we are configured to receive L2F
tunnel connections from. Although this name may match
the peer's DNS host name, it is not required to. This
name corresponds to the PeerName entry in the associated
VPDNInterface section. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| l2fHGConfTunnelSectionNumber |
1.3.6.1.4.1.166.1.26.2.1.8.1.3 |
| ID that identifies this tunnel in the configuration table. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGConfTunnelEnabled |
1.3.6.1.4.1.166.1.26.2.1.8.1.4 |
| Indicates if this VPDN tunnel is enabled or not. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGStat |
1.3.6.1.4.1.166.1.26.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| l2fHGStatCurrentCalls |
1.3.6.1.4.1.166.1.26.2.2.1 |
| Current number of incoming L2F client calls to this
Home Gateway. Cannot ever be greater than
l2fHGConfMaximumCalls. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGStatPeakCalls |
1.3.6.1.4.1.166.1.26.2.2.2 |
| Peak number of incoming L2F client calls to this
Home Gateway. Cannot ever be greater than
l2fHGConfMaximumCalls. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGStatTotalCalls |
1.3.6.1.4.1.166.1.26.2.2.3 |
| Total number of incoming L2F client calls to this
Home Gateway over time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatCallsOverMax |
1.3.6.1.4.1.166.1.26.2.2.4 |
| Number of incoming L2F client calls to this
Home Gateway that were rejected because they were
in excess of l2fHGConfMaximumCalls. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatCallsResourceFailure |
1.3.6.1.4.1.166.1.26.2.2.5 |
| Number of incoming L2F client calls to this
Home Gateway that were rejected because of
miscellaneous resource allocation failures. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatCallsAuthFailed |
1.3.6.1.4.1.166.1.26.2.2.6 |
| Number of incoming L2F client calls to this
Home Gateway that were rejected because of
authentication or permission failures for the user. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatCurrentTunnels |
1.3.6.1.4.1.166.1.26.2.2.7 |
| Current number of incoming L2F Network Access
Server peer tunnels to this Home Gateway. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGStatPeakTunnels |
1.3.6.1.4.1.166.1.26.2.2.8 |
| Peak number of incoming L2F Network Access
Server peer tunnels to this Home Gateway at
any given time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGStatTotalTunnels |
1.3.6.1.4.1.166.1.26.2.2.9 |
| Total number of incoming L2F Network Access
Server peer tunnels to this Home Gateway. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatTunnelNoName |
1.3.6.1.4.1.166.1.26.2.2.10 |
| Number of incoming L2F Network Access Server
peer tunnels to this Home Gateway that were
rejected because the NAS name was unknown. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatTunnelAuthFail |
1.3.6.1.4.1.166.1.26.2.2.11 |
| Number of incoming L2F Network Access Server
peer tunnels to this Home Gateway that were
rejected because the NAS credentials could
not be authenticated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGStatTunnelResourceFailure |
1.3.6.1.4.1.166.1.26.2.2.12 |
| Number of incoming L2F Network Access Server
peer tunnels to this Home Gateway that were
rejected because of a miscellaneous resource
allocation failure. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTable |
1.3.6.1.4.1.166.1.26.2.2.13 |
| This is a table of every L2F NAS tunnel peer that has
ever contacted this Home Gateway. This table is indexed
by the ifIndex of the 'primary' ifTable entry for the
tunnels for this peer. This information will remain in
the system until the next system restart. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
L2fHGPeerEntry |
|
| l2fHGPeerEntry |
1.3.6.1.4.1.166.1.26.2.2.13.1 |
| Status and counter information about this
particular NAS tunnel peer. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
L2fHGPeerEntry |
|
|
| l2fHGPeerIfIndex |
1.3.6.1.4.1.166.1.26.2.2.13.1.1 |
| The ifIndex of the primary (permanent)
ifTable entry for tunnels from this peer.
This value is used to access the NAS peer entry
in the l2fHGPeerTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGPeerEnabled |
1.3.6.1.4.1.166.1.26.2.2.13.1.2 |
| Indicates if this particular NAS peer is configured
to create tunnels with this Home Gateway. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGPeerNASName |
1.3.6.1.4.1.166.1.26.2.2.13.1.3 |
| Name of the peer NAS server. The NAS name is also the
index into the l2fHGConfTunnelTable for this NAS peer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| l2fHGPeerCurrentTunnels |
1.3.6.1.4.1.166.1.26.2.2.13.1.4 |
| Current number of incoming tunnels from this NAS. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGPeerPeakTunnels |
1.3.6.1.4.1.166.1.26.2.2.13.1.5 |
| The maximum number of incoming tunnels from this
NAS peer at any one time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTotalTunnels |
1.3.6.1.4.1.166.1.26.2.2.13.1.6 |
| Total number of incoming tunnels that have been
created from this NAS. In this context, tunnels are
equivalent to the Client ID (CLID). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerCurrentClients |
1.3.6.1.4.1.166.1.26.2.2.13.1.7 |
| Current number of clients that have established
a session on this tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGPeerPeakClients |
1.3.6.1.4.1.166.1.26.2.2.13.1.8 |
| The maximum number of clients which have established
a session on this tunnel at any one time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTotalClients |
1.3.6.1.4.1.166.1.26.2.2.13.1.9 |
| The total number of clients that have established
a session on this tunnel since the tunnel was created. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTunnelAuthFailed |
1.3.6.1.4.1.166.1.26.2.2.13.1.10 |
| Number of tunnels rejected by this Home Gateway
because NAS secret incorrect. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTunnelMiscFailed |
1.3.6.1.4.1.166.1.26.2.2.13.1.11 |
| Number of tunnels that failed to open for other reasons. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTunnelKeepAliveFailed |
1.3.6.1.4.1.166.1.26.2.2.13.1.12 |
| Number of tunnels torn down by this Home Gateway
due to failure of keep-alive monitoring. In the
context of this variable, the keep-alive mechanism
is an exchange of L2F_ECHO (sent by the HG) and
L2F_ECHO_REPLY (sent by NAS) packets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGPeerTunnelLastCloseTime |
1.3.6.1.4.1.166.1.26.2.2.13.1.14 |
| The value of sysUpTime at the time a tunnel from
this NAS peer last closed. This is only an interesting
number if l2fHGPeerCurrentTunnels is zero. It is
kept here because the ifEntry for the tunnels are
volatile, and go away when they close. Therefore, one
cannot determine this information by looking at
ifLastChange. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| l2fHGTunnelTable |
1.3.6.1.4.1.166.1.26.2.2.14 |
| Table consisting of all of the currently active NAS
tunnels. This table augments the ifTable. Each row in
this table has a row in the ifTable of ifType
'propVirtual'. The table is indexed by l2fHGTunnelCLID.
Note that rows in this table come and go as the tunnels
open and close. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
L2fHGTunnelEntry |
|
| l2fHGTunnelEntry |
1.3.6.1.4.1.166.1.26.2.2.14.1 |
| Information concerning a particular active NAS tunnel. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
L2fHGTunnelEntry |
|
|
| l2fHGTunnelCLID |
1.3.6.1.4.1.166.1.26.2.2.14.1.1 |
| The local client identifier for this tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGTunnelPeerCLID |
1.3.6.1.4.1.166.1.26.2.2.14.1.2 |
| The NAS peer's client identifier for this tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGTunnelReceiveChecksum |
1.3.6.1.4.1.166.1.26.2.2.14.1.5 |
| Indicates if the NAS peer will be generating
checksums for the L2F payload received by this
Home Gateway. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGTunnelGenerateChecksum |
1.3.6.1.4.1.166.1.26.2.2.14.1.6 |
| Indicates if this Home Gateway will be generating
checksums for the L2F payload sent to the NAS peer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGTunnelIfIndex |
1.3.6.1.4.1.166.1.26.2.2.14.1.7 |
| The ifIndex of this tunnel in the ifTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGTunnelPeerIndex |
1.3.6.1.4.1.166.1.26.2.2.14.1.8 |
| This is the index into the l2fHGPeerTable. This index
should be identical to the value in l2fHGTunnelIfIndex.
However, if it is not, then this indicates that the
NAS peer (using the same NAS name) has created multiple
tunnels to this Home Gateway. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGTunnelTransport |
1.3.6.1.4.1.166.1.26.2.2.14.1.9 |
| The underlying transport interface which this
tunnel is communicating with the NAS peer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), udp(2), framerelay(3), x25(4) |
|
| l2fHGTunnelIpAddress |
1.3.6.1.4.1.166.1.26.2.2.14.1.10 |
| The IP address of the NAS peer. This value is non-zero
if this tunnel is operating over UDP. Refer to
l2fHGTunnelTransport to determine which transport this
tunnel is communicating over. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| l2fHGTunnelCurrentState |
1.3.6.1.4.1.166.1.26.2.2.14.1.13 |
| Current tunnel state. These are the primary states that
have been defined for the Home Gateway side in the L2F
internet draft. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
undefined(1), start0(2), start1(3), open1(4), open2(5), close1(6) |
|
| l2fHGTunnelCurrentClients |
1.3.6.1.4.1.166.1.26.2.2.14.1.14 |
| Current number of clients accessing this tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGTunnelPeakClients |
1.3.6.1.4.1.166.1.26.2.2.14.1.15 |
| Peak number of clients accessing this tunnel at
any given point in time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGTunnelTotalClients |
1.3.6.1.4.1.166.1.26.2.2.14.1.16 |
| Total number of clients that have communicated over this
tunnel while the tunnel was active. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGTunnelMaxLinkInactivity |
1.3.6.1.4.1.166.1.26.2.2.14.1.17 |
| The maximum amount of time that can elapse (in seconds)
since the last NAS peer packet was received before this
Home Gateway will tear down the tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGTunnelCurrentLinkInactivity |
1.3.6.1.4.1.166.1.26.2.2.14.1.18 |
| The amount of time that has elapsed (in seconds)
since the last NAS peer packet was received. When the
Home Gateway has not heard from the NAS peer in a
period of time, it will generate L2F_ECHO packets to
determine if the NAS is still alive. Once the inactivity
reaches l2fHGTunnelMaxLinkInactivity, the Home Gateway
will tear down the link. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGTunnelSequenceErrors |
1.3.6.1.4.1.166.1.26.2.2.14.1.19 |
| The number of L2F control packets that were received
on this tunnel, by this Home Gateway out of sequence. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGTunnelEchoSent |
1.3.6.1.4.1.166.1.26.2.2.14.1.20 |
| Number of L2F_ECHO packets sent. This typically occurs
when this Home Gateway has not received any data from
the NAS peer over a period of time on this tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGTunnelEchoReceived |
1.3.6.1.4.1.166.1.26.2.2.14.1.21 |
| Number of L2F_ECHO packets received. The NAS peer will
send this packet to determine if this Home Gateway is
still alive. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGTunnelEchoReplySent |
1.3.6.1.4.1.166.1.26.2.2.14.1.22 |
| Number of L2F_ECHO_REPLY packets sent. The Home Gateway
sends this packets in response to the L2F_ECHO packet
sent by the NAS peer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGTunnelEchoReplyReceived |
1.3.6.1.4.1.166.1.26.2.2.14.1.23 |
| Number of L2F_ECHO_REPLY packets received. The NAS
peer sends this packet in response to the L2F_ECHO
packet sent by this Home Gateway. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| l2fHGClientTable |
1.3.6.1.4.1.166.1.26.2.2.15 |
| This table contains status information concerning the
clients' currently operating over tunnels connected to
this Home Gateway. This table is indexed by the
Client ID (CLID) and the non-zero MID. This table
augments the ifTable. Each row in this table has a
corresponding row in the ifTable of ifType 'propVirtual'. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
L2fHGClientEntry |
|
| l2fHGClientEntry |
1.3.6.1.4.1.166.1.26.2.2.15.1 |
| Status information for a particular client operating
over a tunnel connected to this Home Gateway. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
L2fHGClientEntry |
|
|
| l2fHGClientCLID |
1.3.6.1.4.1.166.1.26.2.2.15.1.1 |
| Local Client Identifier for the NAS tunnel
underlying this entry. This is one of the
two indexes used to access this entry in the
table. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGClientMID |
1.3.6.1.4.1.166.1.26.2.2.15.1.2 |
| The Multiplex ID which identifies a particular
connection within the tunnel. This is one of
the two indexes used to access this entry in
the table. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| l2fHGClientPeerCLID |
1.3.6.1.4.1.166.1.26.2.2.15.1.3 |
| Peer Client Identifier for the NAS tunnel
underlying this entry. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| l2fHGClientTunnelState |
1.3.6.1.4.1.166.1.26.2.2.15.1.4 |
| Current client state. These are the primary states that
have been defined for the Home Gateway side in the L2F
internet draft. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
undefined(1), start0(2), open1(3), close1(4), close2(5), close3(6) |
|
| l2fHGClientIfIndex |
1.3.6.1.4.1.166.1.26.2.2.15.1.5 |
| The ifIndex of the NAS peer tunnel (L2F client connection)
in the ifTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| l2fHGClientOpenName |
1.3.6.1.4.1.166.1.26.2.2.15.1.6 |
| The name received from the client in the L2F_OPEN_NAME
option. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| l2fHGClientReqLcp0 |
1.3.6.1.4.1.166.1.26.2.2.15.1.7 |
| Specifies a copy of the initial LCP CONFIGURE-REQUEST
packet sent from the PPP client, as sent by the NAS to
the HG in the L2F_REQ_LCP0 option. This request may
contain options that were negotiated away by the NAS.
The information starts after the length field in the LCP
header, and contains LCP options only. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| l2fHGClientAckLcp1 |
1.3.6.1.4.1.166.1.26.2.2.15.1.8 |
| Specifies a copy of the closing LCP CONFIGURE-ACK
packet sent by the PPP client, as sent by the NAS to
the HG in the L2F_ACK_LCP1 option. The information
starts after the length field in the LCP header, and
contains LCP options only. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| l2fHGClientAckLcp2 |
1.3.6.1.4.1.166.1.26.2.2.15.1.9 |
| Specifies a copy of the closing LCP CONFIGURE-ACK
packet sent to the PPP client, as sent by the NAS to
the HG in the L2F_ACK_LCP2 option. The information
starts after the length field in the LCP header, and
contains LCP options only. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| l2fHGClientOpenType |
1.3.6.1.4.1.166.1.26.2.2.15.1.10 |
| Specifies the type of authentication the NAS
exchanged with the client in detecting the client's
claimed identification. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
slip-textual(1), ppp-chap(2), ppp-pap(3), ppp-none(4), slip-none(5) |
|
| l2fHGClientSequenceEnabled |
1.3.6.1.4.1.166.1.26.2.2.15.1.11 |
| Indicates if sequenced packet delivery is enabled
for DATA packets. Sequenced packets allow the receiver
to determine if a packet is a duplicate or is out of
order. Some PPP protocols assume that PPP will never
re-order packets, so enabling L2F data sequencing protects
against re-ordering between the NAS and HG network. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| l2fHGClientSequenceErrors |
1.3.6.1.4.1.166.1.26.2.2.15.1.12 |
| If sequenced packet delivery is enabled for DATA
packets (see l2fHGClientSequenceEnabled), this value
indicates how many packets were received out of
sequence. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|