SENAO-EOR7550-MIB
File:
SENAO-EOR7550-MIB.mib (42780 bytes)
Imported modules
Imported symbols
Defined Types
| EntLanMacFilterEntry |
|
| SEQUENCE |
|
|
|
| |
entMacAddressIndex |
INTEGER |
|
| |
entMacAddress |
MacAddress |
|
| |
entMacFilteringValid |
TruthValue |
|
| EntWlanESSIDInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDInfoIndex |
INTEGER |
|
| |
entESSID |
OCTET STRING |
|
| |
entBroadcastESSID |
TruthValue |
|
| |
entWMM |
TruthValue |
|
| |
entEncryption |
INTEGER |
|
| |
entWlanAuthenticationType |
INTEGER |
|
| EntWlanWepInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDIndex |
INTEGER |
|
| |
entWlanWepKeyID |
INTEGER |
|
| |
entWlanWepKey1Value |
OCTET STRING |
|
| |
entWlanWepKey2Value |
OCTET STRING |
|
| |
entWlanWepKey3Value |
OCTET STRING |
|
| |
entWlanWepKey4Value |
OCTET STRING |
|
| EntWlanWPAInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDIndex |
INTEGER |
|
| |
entPresharedKey |
DisplayString |
|
| Ent802dot1xInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDIndex |
INTEGER |
|
| |
entRADIUSServerIPAddress |
IpAddress |
|
| |
entRADIUSServerPort |
INTEGER |
|
| |
entRADIUSServerPassword |
DisplayString |
|
| |
entWlan802dot1xEnable |
TruthValue |
|
| EntAthWlanESSIDInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDInfoIndex |
INTEGER |
|
| |
entESSID |
OCTET STRING |
|
| |
entBroadcastESSID |
TruthValue |
|
| |
entWMM |
TruthValue |
|
| |
entEncryption |
INTEGER |
|
| |
entWlanAuthenticationType |
INTEGER |
|
| EntAthWlanWepInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDIndex |
INTEGER |
|
| |
entWlanWepKeyID |
INTEGER |
|
| |
entWlanWepKey1Value |
OCTET STRING |
|
| |
entWlanWepKey2Value |
OCTET STRING |
|
| |
entWlanWepKey3Value |
OCTET STRING |
|
| |
entWlanWepKey4Value |
OCTET STRING |
|
| EntAthWlanWPAInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDIndex |
INTEGER |
|
| |
entPresharedKey |
DisplayString |
|
| EntAth802dot1xInfoEntry |
|
| SEQUENCE |
|
|
|
| |
entWlanESSIDIndex |
INTEGER |
|
| |
entRADIUSServerIPAddress |
IpAddress |
|
| |
entRADIUSServerPort |
INTEGER |
|
| |
entRADIUSServerPassword |
DisplayString |
|
| |
entWlan802dot1xEnable |
TruthValue |
|
Defined Values
| senao |
1.3.6.1.4.1.14125 |
|
The MIB module defines Senao implementation-specific metrics useful in managing
IEEE 802.11 on Senao devices.
This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
|
| MODULE-IDENTITY |
|
|
|
| eor7550 |
1.3.6.1.4.1.14125.101 |
| OBJECT IDENTIFIER |
|
|
|
| entSystem |
1.3.6.1.4.1.14125.101.1 |
| OBJECT IDENTIFIER |
|
|
|
| entLAN |
1.3.6.1.4.1.14125.101.2 |
| OBJECT IDENTIFIER |
|
|
|
| entWAN |
1.3.6.1.4.1.14125.101.3 |
| OBJECT IDENTIFIER |
|
|
|
| entSNMP |
1.3.6.1.4.1.14125.101.6 |
| OBJECT IDENTIFIER |
|
|
|
| entAthWlan |
1.3.6.1.4.1.14125.101.7 |
| OBJECT IDENTIFIER |
|
|
|
| entPassword |
1.3.6.1.4.1.14125.101.1.2 |
| Administration password |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..32) |
|
| entSysMode |
1.3.6.1.4.1.14125.101.1.4 |
| System mode, 0:AP router, 1:Repeater, 2: AP bridge,
3: Client bridge, 4: Client router, 5: WDS bridge,
6: AP router repeater, 7: WDS repeater, 8: WDS router repeater |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ap-router(0), universal-repeater(1), ap-bridge(2), client-bridge(3), client-router(4), wds-bridge(5), ap-router-repeater(6), wds-repeater(7), wds-router-repeater(8) |
|
| entSysUpTime |
1.3.6.1.4.1.14125.101.1.5 |
| System uptime |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| entHwVersion |
1.3.6.1.4.1.14125.101.1.6 |
| The version of the hardware |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| entSN |
1.3.6.1.4.1.14125.101.1.7 |
| Serial Number |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| entAppVersion |
1.3.6.1.4.1.14125.101.1.9 |
| The version of the system application |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| entReset |
1.3.6.1.4.1.14125.101.1.10 |
| Setting this attribute TRUE causes the AP rebooted |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entResetToDefault |
1.3.6.1.4.1.14125.101.1.11 |
| Setting this attribute TRUE will Reboot the system and change settings to factory default |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entApplyModules |
1.3.6.1.4.1.14125.101.1.12 |
| Setting this attribute TRUE will apply the changed modules to reload |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entLANIP |
1.3.6.1.4.1.14125.101.2.1 |
| LAN IP address |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| entSTPEnable |
1.3.6.1.4.1.14125.101.2.3 |
| Set this attribute TUUE will enable 802.1d Spanning Tree. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entDHCPEnable |
1.3.6.1.4.1.14125.101.2.4 |
| When system mode is not 1(Repeater) and 5(WDS bridge),
set this attribute TUUE will enable the DHCP server function of device |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entIPPoolStart |
1.3.6.1.4.1.14125.101.2.5 |
| TWhen system mode is not 1(Repeater) and 5(WDS bridge),
set the start address of DHCP IP pool |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| entIPPoolEnd |
1.3.6.1.4.1.14125.101.2.6 |
| When system mode is not 1(Repeater) and 5(WDS bridge),
set the end address of DHCP IP pool |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| entIPLeaseTime |
1.3.6.1.4.1.14125.101.2.7 |
| When system mode is not 1(Repeater) and 5(WDS bridge),
the time period client can have the IP address assigned by DHCP server
0(half hour),
1(one hour)
2(two hours),
3(half day),
4(one day),
5(two days),
6(one week),
7(two weeks),
8(forever)
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
half-hour(0), one-hour(1), two-hours(2), half-day(3), one-day(4), two-days(5), one-week(6), two-weeks(7), forever(8) |
|
| entRouterEnable |
1.3.6.1.4.1.14125.101.3.1 |
| Only When op mode is 0(AP) or (Client bridge),
can set this attribute. Set TUUE will enable the router. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entLanMacFilteringMode |
1.3.6.1.4.1.14125.101.4.2 |
| The mode of LAN MAC filtering can be 0(white list), 1(black list) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
white-list(0), black-list(1) |
|
| entLanMacFilterTable |
1.3.6.1.4.1.14125.101.4.3 |
| This table provides one row for each LAN MAC filtering.
Each row contains the enterprise LAN MAC filtering table
for that LAN MAC filtering. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntLanMacFilterEntry |
|
| entLanMacFilterEntry |
1.3.6.1.4.1.14125.101.4.3.1 |
| An entry in the entLanMacFilterTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntLanMacFilterEntry |
|
|
| entMacAddressIndex |
1.3.6.1.4.1.14125.101.4.3.1.1 |
| The auxiliary variable used to identify instances of
columnar objects in the LAN MAC Filtering Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entMacAddress |
1.3.6.1.4.1.14125.101.4.3.1.2 |
| MAC address list in the LAN MAC filtering table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| entMacFilteringValid |
1.3.6.1.4.1.14125.101.4.3.1.3 |
| The validity status of each corresponding MAC address in LAN MAC filtering table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entOpMode |
1.3.6.1.4.1.14125.101.5.1.1 |
| Get op mode: 0(AP), 1(Client bridge), 2(Client router),
3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station),
7(Disable) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ap(0), client-bridge(1), client-router(2), wds-bridge(3), wds-repeater(4), repeater-ap(5), repeater-sta(6), disable(7) |
|
| entRadio |
1.3.6.1.4.1.14125.101.5.1.2 |
| Set this attribute TUUE will enable the radio |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entBand |
1.3.6.1.4.1.14125.101.5.1.4 |
| The wireless mode: 0(802.11 b/g),
1(802.11 b),
4(802.11 g),
6(802.11 n),
9(802.11 b/g/n) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ieee802dot11-b-g(0), ieee802dot11-b(1), ieee802dot11-g(4), ieee802dot11-n(6), ieee802dot11-b-g-n(9) |
|
| entESSIDNum |
1.3.6.1.4.1.14125.101.5.1.5 |
| Only when op mode for Ralink is 0(AP) and 5(Repeater AP),
support multiple ESSID. Set the Number of multiple ESSID |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..4 |
|
| entChannel |
1.3.6.1.4.1.14125.101.5.1.6 |
| Only when op mode for Ralink is 0(AP), 3(WDS bridge), 4(WDS repeater) and 5(Repeater AP),
the current operating frequency channel |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..14 |
|
| entDataRate |
1.3.6.1.4.1.14125.101.5.1.7 |
| This attribute specifies the data rate at which the station may transmit data in Mbps
0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps),
18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(0), oneMbps(1), twoMbps(2), fiveNhalfMbps(5), elevenMbps(11), sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18), twentytwoMbps(24), thirtysixMbps(36), fortyeightMbps(48), fiftyfourMbps(54) |
|
| entNDataRate |
1.3.6.1.4.1.14125.101.5.1.8 |
| This attribute specifies the 11n data rate |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(0), mcs0(1), mcs1(2), mcs2(3), mcs3(4), mcs4(5), mcs5(6), mcs6(7), mcs7(8), mcs8(9), mcs9(10), mcs10(11), mcs11(12), mcs12(13), mcs13(14), mcs14(15), mcs15(16) |
|
| entTxPower |
1.3.6.1.4.1.14125.101.5.1.9 |
| The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entBeaconInterval |
1.3.6.1.4.1.14125.101.5.1.10 |
| This attribute specifies the number of TU that a station shall use
for scheduling Beacon transmissions |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
20..1024 |
|
| entDTIMPeriod |
1.3.6.1.4.1.14125.101.5.1.11 |
| This attribute specifies the number of beacon intervals |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| entFragmentationThreshold |
1.3.6.1.4.1.14125.101.5.1.12 |
| This attribute shall specify the current maximum size, in octets,
of the MPDU that may be delivered to the PHY |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
256..2346 |
|
| entRTSThreshold |
1.3.6.1.4.1.14125.101.5.1.13 |
| This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..2347 |
|
| entChannelBandwidth |
1.3.6.1.4.1.14125.101.5.1.14 |
| This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| entPreambleType |
1.3.6.1.4.1.14125.101.5.1.15 |
| This attribute specifies the preamble type: 1(Short), 2(Long) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
short(1), long(2) |
|
| entCTSProtection |
1.3.6.1.4.1.14125.101.5.1.16 |
| This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(0), always(1), none(2) |
|
| entWlanESSIDInfoTable |
1.3.6.1.4.1.14125.101.5.2 |
| This table provides one row for each ESSID information.
Each row contains the enterprise ESSID information Table
for that ESSID information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntWlanESSIDInfoEntry |
|
| entWlanESSIDInfoEntry |
1.3.6.1.4.1.14125.101.5.2.1 |
| An entry in the entWlanESSIDInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntWlanESSIDInfoEntry |
|
|
| entWlanESSIDInfoIndex |
1.3.6.1.4.1.14125.101.5.2.1.1 |
| The auxiliary variable used to identify instances of columnar
objects in the ESSID information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entESSID |
1.3.6.1.4.1.14125.101.5.2.1.2 |
| This attribute reflects the Service Set ID used in
the Desired- SSID parameter of the most recent MLME_Scan.request |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..32) |
|
| entBroadcastESSID |
1.3.6.1.4.1.14125.101.5.2.1.3 |
| Set this attribute TUUE will enable the hidden SSID |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entWMM |
1.3.6.1.4.1.14125.101.5.2.1.4 |
| Set this attribute TUUE will enable WMM |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entEncryption |
1.3.6.1.4.1.14125.101.5.2.1.5 |
| The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4 |
|
| entWlanAuthenticationType |
1.3.6.1.4.1.14125.101.5.2.1.6 |
| The current authentication algorithms: 0 (openSystem), 1(wepAuto),
2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2),
8(WPA1PSKWPA2PSK) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..8 |
|
| entWlanWepInfoTable |
1.3.6.1.4.1.14125.101.5.3 |
| This table provides one row for each WEP information.
Each row contains the enterprise WEP information Table
for that WEP information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntWlanWepInfoEntry |
|
| entWlanWepInfoEntry |
1.3.6.1.4.1.14125.101.5.3.1 |
| An entry in the entWlanWepInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntWlanWepInfoEntry |
|
|
| entWlanESSIDIndex |
1.3.6.1.4.1.14125.101.5.3.1.1 |
| The auxiliary variable used to identify instances of columnar
objects in the WEP information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entWlanWepKeyID |
1.3.6.1.4.1.14125.101.5.3.1.2 |
| This attribute shall indicate the use of the first, second, third, or fourth
element of the WEPDefaultKeys array |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..4 |
|
| entWlanWepKey1Value |
1.3.6.1.4.1.14125.101.5.3.1.3 |
| Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWepKey2Value |
1.3.6.1.4.1.14125.101.5.3.1.4 |
| Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWepKey3Value |
1.3.6.1.4.1.14125.101.5.3.1.5 |
| Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWepKey4Value |
1.3.6.1.4.1.14125.101.5.3.1.6 |
| Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWPAInfoTable |
1.3.6.1.4.1.14125.101.5.4 |
| This table provides one row for each WPA information.
Each row contains the enterprise WPA information Table
for that WPA information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntWlanWPAInfoEntry |
|
| entWlanWPAInfoEntry |
1.3.6.1.4.1.14125.101.5.4.1 |
| An entry in the entWlanWPAInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntWlanWPAInfoEntry |
|
|
| entWlanESSIDIndex |
1.3.6.1.4.1.14125.101.5.4.1.1 |
| The auxiliary variable used to identify instances of columnar
objects in the WPA information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entPresharedKey |
1.3.6.1.4.1.14125.101.5.4.1.2 |
| The WPA Pre-Shared key. (8~63 ASCII or 64 HEX) |
| Status: current |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| ent802dot1xInfoTable |
1.3.6.1.4.1.14125.101.5.5 |
| This table provides one row for each 802.1x information.
Each row contains the enterprise 802.1x information Table
for that 802.1x information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Ent802dot1xInfoEntry |
|
| ent802dot1xInfoEntry |
1.3.6.1.4.1.14125.101.5.5.1 |
| An entry in the ent802dot1xInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ent802dot1xInfoEntry |
|
|
| entWlanESSIDIndex |
1.3.6.1.4.1.14125.101.5.5.1.1 |
| The auxiliary variable used to identify instances of columnar
objects in the 802.1x information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entRADIUSServerPort |
1.3.6.1.4.1.14125.101.5.5.1.3 |
| The port of RADIUS Server |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| entSNMPStatus |
1.3.6.1.4.1.14125.101.6.1 |
| The status of current SNMP agent.0:disable, 1:Enable |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entSNMPVerType |
1.3.6.1.4.1.14125.101.6.2 |
| The version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
all(0), v1(1), v2c(2), v3(3) |
|
| entSNMPTrap |
1.3.6.1.4.1.14125.101.6.4 |
| OBJECT IDENTIFIER |
|
|
|
| entTrapStatus |
1.3.6.1.4.1.14125.101.6.4.1 |
| The trap status of current SNMP agent.0:disable, 1:Enable |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entTrapVer |
1.3.6.1.4.1.14125.101.6.4.2 |
| The trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
all(0), v1(1), v2c(2), v3(3) |
|
| entTrapReceiverIPAddress |
1.3.6.1.4.1.14125.101.6.4.3 |
| Specify the IP address(host) to receive the trap report |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| entTraps |
1.3.6.1.4.1.14125.101.20 |
| OBJECT IDENTIFIER |
|
|
|
| entWanTraps |
1.3.6.1.4.1.14125.101.20.2 |
| OBJECT IDENTIFIER |
|
|
|
| entSystemTrapsReboot |
1.3.6.1.4.1.14125.101.20.1.1 |
| The trap is generated when the system is rebooted. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| entSystemTrapsRestoreToDefault |
1.3.6.1.4.1.14125.101.20.1.2 |
| The trap is generated when the default configuration of the system
is restored. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| entSystemTrapsReloadModules |
1.3.6.1.4.1.14125.101.20.1.3 |
| The trap is generated when the system modules are reloaded. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| entWanTrapsLinkDisconnect |
1.3.6.1.4.1.14125.101.20.2.1 |
| The trap is generated when the PHY of WAN is disconnected and
it was connected. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| entWanTrapsLinkRecover |
1.3.6.1.4.1.14125.101.20.2.2 |
| The trap is generated when the PHY of WAN is connected and
it was disconnected |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| entOpMode |
1.3.6.1.4.1.14125.101.7.1.1 |
| Get op mode: 0(AP), 1(Client bridge), 2(Client router),
3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station),
7(Disable) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ap(0), client-bridge(1), client-router(2), wds-bridge(3), wds-repeater(4), repeater-ap(5), repeater-sta(6), disable(7) |
|
| entBand |
1.3.6.1.4.1.14125.101.7.1.4 |
| The wireless mode:
0(802.11 b/g),
1(802.11 b),
2(802.11 a),
4(802.11 g) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ieee802dot11-b-g(0), ieee802dot11-b(1), ieee802dot11-a(2), ieee802dot11-g(4) |
|
| entESSIDNum |
1.3.6.1.4.1.14125.101.7.1.5 |
| Only when op mode for Atheros is 0(AP),
set the Number of multiple ESSID |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..4 |
|
| entChannel |
1.3.6.1.4.1.14125.101.7.1.6 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The current operating frequency channel |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entDataRate |
1.3.6.1.4.1.14125.101.7.1.7 |
| This attribute specifies the data rate at which the station may transmit data in Mbps
0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps),
18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(0), oneMbps(1), twoMbps(2), fiveNhalfMbps(5), elevenMbps(11), sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18), twentytwoMbps(24), thirtysixMbps(36), fortyeightMbps(48), fiftyfourMbps(54) |
|
| entTxPower |
1.3.6.1.4.1.14125.101.7.1.9 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entBeaconInterval |
1.3.6.1.4.1.14125.101.7.1.10 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the number of TU that a station shall use
for scheduling Beacon transmissions |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
25..1000 |
|
| entDTIMPeriod |
1.3.6.1.4.1.14125.101.7.1.11 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the number of beacon intervals |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..255 |
|
| entFragmentationThreshold |
1.3.6.1.4.1.14125.101.7.1.12 |
| This attribute shall specify the current maximum size, in octets,
of the MPDU that may be delivered to the PHY |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
256..2346 |
|
| entRTSThreshold |
1.3.6.1.4.1.14125.101.7.1.13 |
| This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..2347 |
|
| entPreambleType |
1.3.6.1.4.1.14125.101.7.1.15 |
| This attribute specifies the preamble type: 1(Short), 2(Long) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
short(1), long(2) |
|
| entCTSProtection |
1.3.6.1.4.1.14125.101.7.1.16 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(0), always(1), none(2) |
|
| entDistance |
1.3.6.1.4.1.14125.101.7.1.17 |
| ACK timeout |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
21..191 |
|
| entAthWlanESSIDInfoTable |
1.3.6.1.4.1.14125.101.7.2 |
| This table provides one row for each ESSID information.
Each row contains the enterprise ESSID information Table
for that ESSID information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntAthWlanESSIDInfoEntry |
|
| entAthWlanESSIDInfoEntry |
1.3.6.1.4.1.14125.101.7.2.1 |
| An entry in the entWlanESSIDInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntAthWlanESSIDInfoEntry |
|
|
| entWlanESSIDInfoIndex |
1.3.6.1.4.1.14125.101.7.2.1.1 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The auxiliary variable used to identify instances of columnar
objects in the ESSID information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entESSID |
1.3.6.1.4.1.14125.101.7.2.1.2 |
| Only when op mode for Atheros is 0(AP),
This attribute reflects the Service Set ID used in
the Desired- SSID parameter of the most recent MLME_Scan.request |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..32) |
|
| entBroadcastESSID |
1.3.6.1.4.1.14125.101.7.2.1.3 |
| Only when op mode for Atheros is 0(AP),
Set this attribute TUUE will enable the hidden SSID |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entWMM |
1.3.6.1.4.1.14125.101.7.2.1.4 |
| Only when op mode for Atheros is 0(AP),
Set this attribute TUUE will enable WMM |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| entEncryption |
1.3.6.1.4.1.14125.101.7.2.1.5 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4 |
|
| entWlanAuthenticationType |
1.3.6.1.4.1.14125.101.7.2.1.6 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The current authentication algorithms: 0 (openSystem), 1(wepAuto),
2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2),
8(WPA1PSKWPA2PSK) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..8 |
|
| entAthWlanWepInfoTable |
1.3.6.1.4.1.14125.101.7.3 |
| This table provides one row for each WEP information.
Each row contains the enterprise WEP information Table
for that WEP information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntAthWlanWepInfoEntry |
|
| entAthWlanWepInfoEntry |
1.3.6.1.4.1.14125.101.7.3.1 |
| An entry in the entWlanWepInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntAthWlanWepInfoEntry |
|
|
| entWlanESSIDIndex |
1.3.6.1.4.1.14125.101.7.3.1.1 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The auxiliary variable used to identify instances of columnar
objects in the WEP information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entWlanWepKeyID |
1.3.6.1.4.1.14125.101.7.3.1.2 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute shall indicate the use of the first, second, third, or fourth
element of the WEPDefaultKeys array |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..4 |
|
| entWlanWepKey1Value |
1.3.6.1.4.1.14125.101.7.3.1.3 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWepKey2Value |
1.3.6.1.4.1.14125.101.7.3.1.4 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWepKey3Value |
1.3.6.1.4.1.14125.101.7.3.1.5 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entWlanWepKey4Value |
1.3.6.1.4.1.14125.101.7.3.1.6 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| entAthWlanWPAInfoTable |
1.3.6.1.4.1.14125.101.7.4 |
| This table provides one row for each WPA information.
Each row contains the enterprise WPA information Table
for that WPA information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntAthWlanWPAInfoEntry |
|
| entAthWlanWPAInfoEntry |
1.3.6.1.4.1.14125.101.7.4.1 |
| An entry in the entWlanWPAInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntAthWlanWPAInfoEntry |
|
|
| entWlanESSIDIndex |
1.3.6.1.4.1.14125.101.7.4.1.1 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The auxiliary variable used to identify instances of columnar
objects in the WPA information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entPresharedKey |
1.3.6.1.4.1.14125.101.7.4.1.2 |
| Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The WPA Pre-Shared key. (8~63 ASCII or 64 HEX) |
| Status: current |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| entAth802dot1xInfoTable |
1.3.6.1.4.1.14125.101.7.5 |
| This table provides one row for each 802.1x information.
Each row contains the enterprise 802.1x information Table
for that 802.1x information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EntAth802dot1xInfoEntry |
|
| entAth802dot1xInfoEntry |
1.3.6.1.4.1.14125.101.7.5.1 |
| An entry in the ent802dot1xInfoTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EntAth802dot1xInfoEntry |
|
|
| entWlanESSIDIndex |
1.3.6.1.4.1.14125.101.7.5.1.1 |
| Only when op mode for Atheros is 0(AP),
The auxiliary variable used to identify instances of columnar
objects in the 802.1x information Table |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| entRADIUSServerIPAddress |
1.3.6.1.4.1.14125.101.7.5.1.2 |
| Only when op mode for Atheros is 0(AP),
The address of RADIUS Server |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| entRADIUSServerPort |
1.3.6.1.4.1.14125.101.7.5.1.3 |
| Only when op mode for Atheros is 0(AP),
The port of RADIUS Server |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| entRADIUSServerPassword |
1.3.6.1.4.1.14125.101.7.5.1.4 |
| Only when op mode for Atheros is 0(AP),
The password of RADIUS Server |
| Status: current |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| entWlan802dot1xEnable |
1.3.6.1.4.1.14125.101.7.5.1.5 |
| Only when op mode for Atheros is 0(AP),
Set this attribute TUUE will enable 802.1x |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|