RUCKUS-ZD-AP-MIB

File: RUCKUS-ZD-AP-MIB.mib (13670 bytes)

Imported modules

RUCKUS-ROOT-MIB	SNMPv2-TC	SNMPv2-CONF
IF-MIB	SNMPv2-SMI

Imported symbols

ruckusZDWLANModule	DisplayString	MacAddress
RowStatus	TruthValue	OBJECT-GROUP
ifIndex	InterfaceIndex	MODULE-IDENTITY
OBJECT-TYPE	Counter32	Integer32
Unsigned32	IpAddress

Defined Types

RuckusZDAPConfigEntry
SEQUENCE
	ruckusZDAPConfigID	INTEGER
	ruckusZDAPConfigMacAddress	MacAddress
	ruckusZDAPConfigAPModel	OCTET STRING
	ruckusZDAPConfigDeviceName	OCTET STRING
	ruckusZDAPConfigDescription	OCTET STRING
	ruckusZDAPConfigLocation	OCTET STRING
	ruckusZDAPConfigGpsLatitude	OCTET STRING
	ruckusZDAPConfigGpsLongitude	OCTET STRING
	ruckusZDAPConfigIPVersion	INTEGER
	ruckusZDAPConfigIpAddressSettingMode	INTEGER
	ruckusZDAPConfigIpAddress	IpAddress
	ruckusZDAPConfigIpAddressMask	IpAddress
	ruckusZDAPConfigGatewayIpAddress	IpAddress
	ruckusZDAPConfigPrimaryDnsIpAddress	IpAddress
	ruckusZDAPConfigSecondaryDnsIpAddress	IpAddress
	ruckusZDAPConfigIpV6AddressSettingMode	INTEGER
	ruckusZDAPConfigIpV6Address	OCTET STRING
	ruckusZDAPConfigIpV6PrefixLen	INTEGER
	ruckusZDAPConfigGatewayIpV6Address	OCTET STRING
	ruckusZDAPConfigPrimaryDnsIpV6Address	OCTET STRING
	ruckusZDAPConfigSecondaryDnsV6IpAddress	OCTET STRING
	ruckusZDAPConfigRadioType	INTEGER
	ruckusZDAPConfigRadioChannel24	Integer32
	ruckusZDAPConfigRadioTxPowerLevel24	INTEGER
	ruckusZDAPConfigRadioWlanGroup24	OCTET STRING
	ruckusZDAPConfigRadioEnableWlanService24	INTEGER
	ruckusZDAPConfigRadioChannel5	Integer32
	ruckusZDAPConfigRadioTxPowerLevel5	INTEGER
	ruckusZDAPConfigRadioWlanGroup5	OCTET STRING
	ruckusZDAPConfigRadioEnableWlanService5	INTEGER
	ruckusZDAPConfigMeshConfigurationMode	INTEGER
	ruckusZDAPConfigUplinkSelectionMode	INTEGER
	ruckusZDAPConfigApproveMode	INTEGER
	ruckusZDAPConfigManagementAdmin	INTEGER
	ruckusZDAPConfigRebootNow	INTEGER

Defined Values

ruckusZDAPMIB		1.3.6.1.4.1.25053.1.2.2.4
Ruckus ZD WLAN Configuration mib
MODULE-IDENTITY

ruckusZDAPObjects		1.3.6.1.4.1.25053.1.2.2.4.1
OBJECT IDENTIFIER

ruckusZDAPConfig		1.3.6.1.4.1.25053.1.2.2.4.1.1
OBJECT IDENTIFIER

ruckusZDAPConfigTable		1.3.6.1.4.1.25053.1.2.2.4.1.1.1
ZD AP table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RuckusZDAPConfigEntry

ruckusZDAPConfigEntry		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1
Specifies a ZoneDirector AP configuration per entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	RuckusZDAPConfigEntry

ruckusZDAPConfigID		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.1
AP ID.Max value:for zd1000,50;for zd1100,100;for zd3000,500;zd5000,1000
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..5000

ruckusZDAPConfigMacAddress		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.2
AP MAC Address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

ruckusZDAPConfigAPModel		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.4
AP Model.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ruckusZDAPConfigDeviceName		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.5
AP Name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ruckusZDAPConfigDescription		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.6
AP Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ruckusZDAPConfigLocation		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.7
AP Location.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ruckusZDAPConfigGpsLatitude		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.10
The AP GPS location measured. the range is '-90,90'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..16)

ruckusZDAPConfigGpsLongitude		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.11
The AP GPS location measured. the range is '-180,180'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..16)

ruckusZDAPConfigIPVersion		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.14
The AP IP version
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ipv4(1), ipv6(2), dualstack(3), useparentsetting(4)

ruckusZDAPConfigIpAddressSettingMode		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.15
The AP IP address configuration setting control. admin-by-zd: ap ipv4 address is set in static model by zd; admin-by-dhcp: ap ipv4 address is set in dhcp model by zd; admin-by-ap: ap ipv4 address is gotten by itself in ap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	admin-by-zd(1), admin-by-dhcp(2), admin-by-ap(3)

ruckusZDAPConfigIpAddress		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.16
The AP IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ruckusZDAPConfigIpAddressMask		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.17
The AP IP address mask.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ruckusZDAPConfigGatewayIpAddress		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.20
The AP Gateway IP Address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ruckusZDAPConfigIpV6AddressSettingMode		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.21
The AP IPV6 address configuration setting control. admin-by-zd: ap ipv6 address is set in manual model by zd; admin-by-autoconfig: ap ipv6 address is set in autoconfig(from route server or dhcpv6 server) model by zd; admin-by-ap: ap ipv6 address is gotten by itself in ap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	admin-by-zd(1), admin-by-autoconfig(2), admin-by-ap(3)

ruckusZDAPConfigIpV6Address		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.22
The AP IPV6 address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2..40)

ruckusZDAPConfigIpV6PrefixLen		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.23
The AP IPV6 prefix length.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	3..128

ruckusZDAPConfigGatewayIpV6Address		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.24
The AP Gateway IPV6 Address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2..40)

ruckusZDAPConfigPrimaryDnsIpAddress		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.25
The AP Primary DNS IP Address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ruckusZDAPConfigSecondaryDnsIpAddress		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.26
The AP Secondary DNS IP Address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ruckusZDAPConfigPrimaryDnsIpV6Address		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.27
The AP Primary DNS IPV6 Address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2..40)

ruckusZDAPConfigSecondaryDnsV6IpAddress		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.28
The AP Secondary DNS IPV6 Address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2..40)

ruckusZDAPConfigRadioType		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.30
The AP Wireless type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ieee80211bg(1), ieee80211na(2), ieee80211a(3), ieee80211n(4), ieee80211ng(5), ieee80211ac(6)

ruckusZDAPConfigRadioChannel24		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.31
The AP Channel selection on the 2.4 GHz radio. The AP radio channel, selectable 0, 1-11, 0 : auto channel selection, 1-11 : specific channel selection.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..11

ruckusZDAPConfigRadioTxPowerLevel24		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.32
The AP Tx Power level selection on the 2.4 GHz radio, auto(25) \| 0 to 24 corresponding to 0 to -24dB from max power. Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..25

ruckusZDAPConfigRadioWlanGroup24		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.33
The AP WLAN group (name) selection on the 2.4 GHz radio.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..63)

ruckusZDAPConfigRadioEnableWlanService24		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.34
The AP enable wlan service flag on the 2.4 GHz radio.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ruckusZDAPConfigRadioChannel5		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.40
The AP Channel selection on the 5 GHz radio. The AP radio channel, selectable 0, 36-165, 0 : auto channel selection, 36-165 : specific channel selection. It is ruled by country code.Please consult the MAP of channel for each country.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0 \| 36..165

ruckusZDAPConfigRadioTxPowerLevel5		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.41
The AP Tx Power level selection on the 5 GHz radio, auto(25) \| 0 to 24 corresponding to 0 to -24dB from max power. Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..25

ruckusZDAPConfigRadioWlanGroup5		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.42
The AP WLAN group (name) selection on the 5 GHz radio.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..63)

ruckusZDAPConfigRadioEnableWlanService5		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.43
The AP enable wlan service flag on the 5 GHz radio.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ruckusZDAPConfigMeshConfigurationMode		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.50
The AP Mesh network configuration mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	auto(1), root-ap(2), mesh-ap(3), disabled(4)

ruckusZDAPConfigUplinkSelectionMode		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.51
The AP network uplink selection mode. For manual,now 'set' is not supported
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	smart(1), manual(2)

ruckusZDAPConfigApproveMode		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.52
AP approval state. For not-approved,'set' is not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	approved(1), not-approved(2)

ruckusZDAPConfigManagementAdmin		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.60
Admin action to remove this AP from the ZD management.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1), associated(2)

ruckusZDAPConfigRebootNow		1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.64
AP reboot right now.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reboot(1)