ROHC-MIB

File: ROHC-MIB.mib (40950 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter32 mib-2 TEXTUAL-CONVENTION
TruthValue TimeInterval DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP SnmpAdminString
ifIndex

Defined Types

RohcChannelIdentifier  
A number identifying a channel. The value of 0 must not be used as identifier of an existing channel.
TEXTUAL-CONVENTION    
  Unsigned32 1..4294967295  

RohcChannelIdentifierOrZero  
A number identifying a channel. The value of 0 is indicates that no channel is identified.
TEXTUAL-CONVENTION    
  Unsigned32 0..4294967295  

RohcCompressionRatio  
A number indicating a compression ratio over a set of bytes. The value is defined as 1000 * bytes(compressed) / bytes(original) rounded to the next integer value. Note that compressed sets of bytes can be larger than the corresponding uncompressed ones. Therefore, the number can be greater than 1000.
TEXTUAL-CONVENTION    
  Unsigned32  

RohcChannelEntry  
SEQUENCE    
  rohcChannelID RohcChannelIdentifier
  rohcChannelType INTEGER
  rohcChannelFeedbackFor RohcChannelIdentifierOrZero
  rohcChannelDescr SnmpAdminString
  rohcChannelStatus INTEGER

RohcInstanceEntry  
SEQUENCE    
  rohcInstanceType INTEGER
  rohcInstanceFBChannelID RohcChannelIdentifierOrZero
  rohcInstanceVendor OBJECT IDENTIFIER
  rohcInstanceVersion SnmpAdminString
  rohcInstanceDescr SnmpAdminString
  rohcInstanceClockRes Unsigned32
  rohcInstanceMaxCID Unsigned32
  rohcInstanceLargeCIDs TruthValue
  rohcInstanceMRRU Unsigned32
  rohcInstanceContextStorageTime TimeInterval
  rohcInstanceStatus INTEGER
  rohcInstanceContextsTotal Counter32
  rohcInstanceContextsCurrent Unsigned32
  rohcInstancePackets Counter32
  rohcInstanceIRs Counter32
  rohcInstanceIRDYNs Counter32
  rohcInstanceFeedbacks Counter32
  rohcInstanceCompressionRatio RohcCompressionRatio

RohcProfileEntry  
SEQUENCE    
  rohcProfile Unsigned32
  rohcProfileVendor OBJECT IDENTIFIER
  rohcProfileVersion SnmpAdminString
  rohcProfileDescr SnmpAdminString
  rohcProfileNegotiated TruthValue

RohcContextEntry  
SEQUENCE    
  rohcContextCID Unsigned32
  rohcContextCIDState INTEGER
  rohcContextProfile Unsigned32
  rohcContextDecompressorDepth Unsigned32
  rohcContextStorageTime TimeInterval
  rohcContextActivationTime DateAndTime
  rohcContextDeactivationTime DateAndTime
  rohcContextPackets Counter32
  rohcContextIRs Counter32
  rohcContextIRDYNs Counter32
  rohcContextFeedbacks Counter32
  rohcContextDecompressorFailures Counter32
  rohcContextDecompressorRepairs Counter32
  rohcContextAllPacketsRatio RohcCompressionRatio
  rohcContextAllHeadersRatio RohcCompressionRatio
  rohcContextAllPacketsMeanSize Unsigned32
  rohcContextAllHeadersMeanSize Unsigned32
  rohcContextLastPacketsRatio RohcCompressionRatio
  rohcContextLastHeadersRatio RohcCompressionRatio
  rohcContextLastPacketsMeanSize Unsigned32
  rohcContextLastHeadersMeanSize Unsigned32

Defined Values

rohcMIB 1.3.6.1.2.1.112
This MIB module defines a set of basic objects for monitoring and configuring robust header compression. The module covers information about running instances of ROHC (compressors or decompressors) at IP interfaces. Information about compressor contexts and decompressor contexts has different structure for different profiles. Therefore it is not provided by this MIB module, but by individual modules for different profiles. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3816. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html
MODULE-IDENTITY    

rohcObjects 1.3.6.1.2.1.112.1
OBJECT IDENTIFIER    

rohcConformance 1.3.6.1.2.1.112.2
OBJECT IDENTIFIER    

rohcInstanceObjects 1.3.6.1.2.1.112.1.1
OBJECT IDENTIFIER    

rohcChannelTable 1.3.6.1.2.1.112.1.1.1
This table lists and describes all ROHC channels per interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RohcChannelEntry

rohcChannelEntry 1.3.6.1.2.1.112.1.1.1.1
An entry describing a particular script. Every script that is stored in non-volatile memory is required to appear in this script table. Note, that the rohcChannelID identifies the channel uniquely. The ifIndex is part of the index of this table just in order to allow addressing channels per interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RohcChannelEntry  

rohcChannelID 1.3.6.1.2.1.112.1.1.1.1.2
The locally arbitrary, but unique identifier associated with this channel. The value is REQUIRED to be unique per ROHC MIB implementation independent of the associated interface. The value is REQUIRED to remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. It is RECOMMENDED that the value persist across such re-initializations.
Status: current Access: not-accessible
OBJECT-TYPE    
  RohcChannelIdentifier  

rohcChannelType 1.3.6.1.2.1.112.1.1.1.1.3
Type of usage of the channel. A channel might be currently not in use for ROHC or feedback, it might be in use as a ROHC channel carrying packets and optional piggy-backed feedback, or it might be used as a dedicated feedback channel exclusively carrying feedback.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notInUse(1), rohc(2), dedicatedFeedback(3)  

rohcChannelFeedbackFor 1.3.6.1.2.1.112.1.1.1.1.4
The index of another channel of this interface for which the channel serves as feedback channel. If no feedback information is transferred on this channel, then the value of this ID is 0. If the channel type is set to notInUse(1), then the value of this object must be 0. If the channel type is rohc(2) and the value of this object is a valid channel ID, then feedback information is piggy-backed on the ROHC channel. If the channel type is dedicatedFeedback(3), then feedback is transferred on this channel and the value of this object MUST be different from 0 and MUST identify an existing ROHC channel.
Status: current Access: read-only
OBJECT-TYPE    
  RohcChannelIdentifierOrZero  

rohcChannelDescr 1.3.6.1.2.1.112.1.1.1.1.5
A textual description of the channel.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rohcChannelStatus 1.3.6.1.2.1.112.1.1.1.1.6
Status of the channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rohcInstanceTable 1.3.6.1.2.1.112.1.1.2
This table lists properties of running instances of robust header compressors and decompressors at IP interfaces. It is indexed by interface number, the type of instance (compressor or decompressor), and the ID of the channel used by the instance as ROHC channel. Note that the rohcChannelID uniquely identifies an instance. The ifIndex and rohcInstanceType are part of the index, because it simplifies accessing instances per interface and for addressing either compressors or decompressors only.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RohcInstanceEntry

rohcInstanceEntry 1.3.6.1.2.1.112.1.1.2.1
An entry describing a particular instance of a robust header compressor or decompressor.
Status: current Access: not-accessible
OBJECT-TYPE    
  RohcInstanceEntry  

rohcInstanceType 1.3.6.1.2.1.112.1.1.2.1.2
Type of the instance of ROHC. It is either a compressor instance or a decompressor instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER compressor(1), decompressor(2)  

rohcInstanceFBChannelID 1.3.6.1.2.1.112.1.1.2.1.4
Identifier of the channel used for feedback. If no feedback channel is used, the value of this object is 0 .
Status: current Access: read-only
OBJECT-TYPE    
  RohcChannelIdentifierOrZero  

rohcInstanceVendor 1.3.6.1.2.1.112.1.1.2.1.5
An object identifier that identifies the vendor who provides the implementation of robust header description. This object identifier SHALL point to the object identifier directly below the enterprise object identifier {1 3 6 1 4 1} allocated for the vendor. The value must be the object identifier {0 0} if the vendor is not known.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rohcInstanceVersion 1.3.6.1.2.1.112.1.1.2.1.6
The version number of the implementation of robust header compression. The zero-length string shall be used if the implementation does not have a version number. It is suggested that the version number consist of one or more decimal numbers separated by dots, where the first number is called the major version number.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

rohcInstanceDescr 1.3.6.1.2.1.112.1.1.2.1.7
A textual description of the implementation.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rohcInstanceClockRes 1.3.6.1.2.1.112.1.1.2.1.8
This object indicates the system clock resolution in units of milliseconds. A zero (0) value means that there is no clock available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcInstanceMaxCID 1.3.6.1.2.1.112.1.1.2.1.9
The highest context ID number to be used by the compressor. Note that this parameter is not coupled to, but in effect further constrained by, rohcChannelLargeCIDs.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16383  

rohcInstanceLargeCIDs 1.3.6.1.2.1.112.1.1.2.1.10
When retrieved, this boolean object returns false if the short CID representation (0 bytes or 1 prefix byte, covering CID 0 to 15) is used; it returns true, if the embedded CID representation (1 or 2 embedded CID bytes covering CID 0 to 16383) is used.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rohcInstanceMRRU 1.3.6.1.2.1.112.1.1.2.1.11
Maximum reconstructed reception unit. This is the size of the largest reconstructed unit in octets that the decompressor is expected to reassemble from segments (see RFC 3095, Section 5.2.5). Note that this size includes the CRC. If MRRU is negotiated to be 0, no segment headers are allowed on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcInstanceContextStorageTime 1.3.6.1.2.1.112.1.1.2.1.12
This object indicates the default maximum amount of time information on a context belonging to this instance is kept as entry in the rohcContextTable after the context is expired or terminated. The value of this object is used to initialize rohcContexStorageTime object when a new context is created. Changing the value of an rohcInstanceContextStorageTime instance does not affect any entry of the rohcContextTable created previously. ROHC-MIB implementations SHOULD store the set value of this object persistently.
Status: current Access: read-write
OBJECT-TYPE    
  TimeInterval  

rohcInstanceStatus 1.3.6.1.2.1.112.1.1.2.1.13
Status of the instance of ROHC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rohcInstanceContextsTotal 1.3.6.1.2.1.112.1.1.2.1.14
Counter of all contexts created by this instance. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcInstanceContextsCurrent 1.3.6.1.2.1.112.1.1.2.1.15
Number of currently active contexts created by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcInstancePackets 1.3.6.1.2.1.112.1.1.2.1.16
Counter of all packets passing this instance. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcInstanceIRs 1.3.6.1.2.1.112.1.1.2.1.17
The number of all IR packets that are either sent or received by this instance. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcInstanceIRDYNs 1.3.6.1.2.1.112.1.1.2.1.18
The number of all IR-DYN packets that are either sent or received by this instance. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcInstanceFeedbacks 1.3.6.1.2.1.112.1.1.2.1.19
The number of all feedbacks that are either sent or received by this instance. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcInstanceCompressionRatio 1.3.6.1.2.1.112.1.1.2.1.20
This object indicates the compression ratio so far over all packets on the channel served by this instance. The compression is computed over all bytes of the IP packets including the IP header but excluding all lower layer headers.
Status: current Access: read-only
OBJECT-TYPE    
  RohcCompressionRatio  

rohcProfileTable 1.3.6.1.2.1.112.1.1.3
This table lists a set of profiles supported by the instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RohcProfileEntry

rohcProfileEntry 1.3.6.1.2.1.112.1.1.3.1
An entry describing a particular profile supported by the instance. It is indexed by the rohcChannelID identifying the instance and by the rohcProfile.
Status: current Access: not-accessible
OBJECT-TYPE    
  RohcProfileEntry  

rohcProfile 1.3.6.1.2.1.112.1.1.3.1.2
Identifier of a profile supported. For a listing of possible profile values, see the IANA registry for 'RObust Header Compression (ROHC) Profile Identifiers' at http://www.iana.org/assignments/rohc-pro-ids
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

rohcProfileVendor 1.3.6.1.2.1.112.1.1.3.1.3
An object identifier that identifies the vendor who provides the implementation of robust header description. This object identifier SHALL point to the object identifier directly below the enterprise object identifier {1 3 6 1 4 1} allocated for the vendor. The value must be the object identifier {0 0} if the vendor is not known.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rohcProfileVersion 1.3.6.1.2.1.112.1.1.3.1.4
The version number of the implementation of robust header compression. The zero-length string shall be used if the implementation does not have a version number. It is suggested that the version number consist of one or more decimal numbers separated by dots, where the first number is called the major version number.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

rohcProfileDescr 1.3.6.1.2.1.112.1.1.3.1.5
A textual description of the implementation.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rohcProfileNegotiated 1.3.6.1.2.1.112.1.1.3.1.6
When retrieved, this boolean object returns true if the profile has been negotiated to be used at the instance, i.e., is supported also be the corresponding compressor/decompressor.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rohcContextTable 1.3.6.1.2.1.112.1.2
This table lists and describes all compressor contexts per instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RohcContextEntry

rohcContextEntry 1.3.6.1.2.1.112.1.2.1
An entry describing a particular compressor context.
Status: current Access: not-accessible
OBJECT-TYPE    
  RohcContextEntry  

rohcContextCID 1.3.6.1.2.1.112.1.2.1.2
The context identifier (CID) of this context.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..16383  

rohcContextCIDState 1.3.6.1.2.1.112.1.2.1.3
State of the CID. When a CID is assigned to a context, its state changes from `unused' to `active'. The active context may stop operation due to some explicit signalling or after observing no packet for some specified time. In the first case then the CID state changes to `terminated', in the latter case it changes to `expired'. If the CID is re-used again for another context, the state changes back to `active'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unused(1), active(2), expired(3), terminated(4)  

rohcContextProfile 1.3.6.1.2.1.112.1.2.1.4
Identifier of the profile for this context. The profile is identified by its index in the rohcProfileTable for this instance. There MUST exist a corresponding entry in the rohcProfileTable using the value of rohcContextProfile as second part of the index (and using the same rohcChannelID as first part of the index).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

rohcContextDecompressorDepth 1.3.6.1.2.1.112.1.2.1.5
This object indicates whether reverse decompression, for example as described in RFC 3095, Section 6.1, is used on this channel or not, and if used, to what extent. Its value is only valid for decompressor contexts, i.e., if rohcInstanceType has the value decompressor(2). For compressor contexts where rohcInstanceType has the value compressor(1), the value of this object is irrelevant and MUST be set to zero (0). The value of the reverse decompression depth indicates the maximum number of packets that are buffered, and thus possibly be reverse decompressed by the decompressor. A zero (0) value means that reverse decompression is not used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcContextStorageTime 1.3.6.1.2.1.112.1.2.1.6
The value of this object specifies how long this row can exist in the rohcContextTable after the rohcContextCIDState switched to expired(3) or terminated(4). This object returns the remaining time that the row may exist before it is aged out. The object is initialized with the value of the associated rohcContextStorageTime object. After expiration or termination of the context, the value of this object ticks backwards. The entry in the rohcContextTable is destroyed when the value reaches 0. The value of this object may be set in order to increase or reduce the remaining time that the row may exist. Setting the value to 0 will destroy this entry as soon as the rochContextCIDState has the value expired(3) or terminated(4). Note that there is no guarantee that the row is stored as long as this object indicates. In case of limited CID space, the instance may re-use a CID before the storage time of the corresponding row in rohcContextTable reaches the value of 0. In this case the information stored in this row is not anymore available.
Status: current Access: read-write
OBJECT-TYPE    
  TimeInterval  

rohcContextActivationTime 1.3.6.1.2.1.112.1.2.1.7
The date and time when the context started to be able to compress packets or decompress packets, respectively. The value '0000000000000000'H is returned if the context has not been activated yet.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

rohcContextDeactivationTime 1.3.6.1.2.1.112.1.2.1.8
The date and time when the context stopped being able to compress packets or decompress packets, respectively, because it expired or was terminated for other reasons. The value '0000000000000000'H is returned if the context has not been deactivated yet.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

rohcContextPackets 1.3.6.1.2.1.112.1.2.1.9
The number of all packets passing this context. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. For checking ifCounterDiscontinuityTime, the interface index is required. It can be determined by reading the rohcChannelTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcContextIRs 1.3.6.1.2.1.112.1.2.1.10
The number of all IR packets sent or received, respectively, by this context. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. For checking ifCounterDiscontinuityTime, the interface index is required. It can be determined by reading the rohcChannelTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcContextIRDYNs 1.3.6.1.2.1.112.1.2.1.11
The number of all IR-DYN packets sent or received, respectively, by this context. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. For checking ifCounterDiscontinuityTime, the interface index is required. It can be determined by reading the rohcChannelTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcContextFeedbacks 1.3.6.1.2.1.112.1.2.1.12
The number of all feedbacks sent or received, respectively, by this context. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. For checking ifCounterDiscontinuityTime, the interface index is required. It can be determined by reading the rohcChannelTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcContextDecompressorFailures 1.3.6.1.2.1.112.1.2.1.13
The number of all decompressor failures so far in this context. The number is only valid for decompressor contexts, i.e., if rohcInstanceType has the value decompressor(2). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. For checking ifCounterDiscontinuityTime, the interface index is required. It can be determined by reading the rohcChannelTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcContextDecompressorRepairs 1.3.6.1.2.1.112.1.2.1.14
The number of all context repairs so far in this context. The number is only valid for decompressor contexts, i.e., if rohcInstanceType has the value decompressor(2). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. For checking ifCounterDiscontinuityTime, the interface index is required. It can be determined by reading the rohcChannelTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rohcContextAllPacketsRatio 1.3.6.1.2.1.112.1.2.1.15
This object indicates the compression ratio so far over all packets passing this context. The compression is computed over all bytes of the IP packets including the IP header but excluding all lower layer headers.
Status: current Access: read-only
OBJECT-TYPE    
  RohcCompressionRatio  

rohcContextAllHeadersRatio 1.3.6.1.2.1.112.1.2.1.16
This object indicates the compression ratio so far over all packet headers passing this context. The compression is computed over all bytes of all headers that are subject to compression for the used profile.
Status: current Access: read-only
OBJECT-TYPE    
  RohcCompressionRatio  

rohcContextAllPacketsMeanSize 1.3.6.1.2.1.112.1.2.1.17
This object indicates the mean compressed packet size of all packets passing this context. The packet size includes the IP header and payload but excludes all lower layer headers. The mean value is given in byte rounded to the next integer value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcContextAllHeadersMeanSize 1.3.6.1.2.1.112.1.2.1.18
This object indicates the mean compressed packet header size of all packets passing this context. The packet header size is the sum of the size of all headers of a packet that are subject to compression for the used profile. The mean value is given in byte rounded to the next integer value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcContextLastPacketsRatio 1.3.6.1.2.1.112.1.2.1.19
This object indicates the compression ratio concerning the last 16 packets passing this context or concerning all packets passing this context if they are less than 16, so far. The compression is computed over all bytes of the IP packets including the IP header but excluding all lower layer headers.
Status: current Access: read-only
OBJECT-TYPE    
  RohcCompressionRatio  

rohcContextLastHeadersRatio 1.3.6.1.2.1.112.1.2.1.20
This object indicates the compression ratio concerning the headers of the last 16 packets passing this context or concerning the headers of all packets passing this context if they are less than 16, so far. The compression is computed over all bytes of all headers that are subject to compression for the used profile.
Status: current Access: read-only
OBJECT-TYPE    
  RohcCompressionRatio  

rohcContextLastPacketsMeanSize 1.3.6.1.2.1.112.1.2.1.21
This object indicates the mean compressed packet size concerning the last 16 packets passing this context or concerning all packets passing this context if they are less than 16, so far. The packet size includes the IP header and payload but excludes all lower layer headers. The mean value is given in byte rounded to the next integer value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcContextLastHeadersMeanSize 1.3.6.1.2.1.112.1.2.1.22
This object indicates the mean compressed packet header size concerning the last 16 packets passing this context or concerning all packets passing this context if they are less than 16, so far. The packet header size is the sum of the size of all headers of a packet that are subject to compression for the used profile. The mean value is given in byte rounded to the next integer value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rohcCompliances 1.3.6.1.2.1.112.2.1
OBJECT IDENTIFIER    

rohcGroups 1.3.6.1.2.1.112.2.2
OBJECT IDENTIFIER    

rohcCompliance 1.3.6.1.2.1.112.2.1.1
The compliance statement for SNMP entities that implement the ROHC-MIB. Note that compliance with this compliance statement requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC2863).
Status: current Access: read-only
MODULE-COMPLIANCE    

rohcInstanceGroup 1.3.6.1.2.1.112.2.2.2
A collection of objects providing information about ROHC instances, used channels and available profiles.
Status: current Access: read-only
OBJECT-GROUP    

rohcStatisticsGroup 1.3.6.1.2.1.112.2.2.4
A collection of objects providing ROHC statistics.
Status: current Access: read-only
OBJECT-GROUP    

rohcContextGroup 1.3.6.1.2.1.112.2.2.5
A collection of objects providing information about ROHC compressor contexts and decompressor contexts.
Status: current Access: read-only
OBJECT-GROUP    

rohcTimerGroup 1.3.6.1.2.1.112.2.2.6
A collection of objects providing statistical information about ROHC compressor contexts and decompressor contexts.
Status: current Access: read-only
OBJECT-GROUP    

rohcContextStatisticsGroup 1.3.6.1.2.1.112.2.2.7
A collection of objects providing statistical information about ROHC compressor contexts and decompressor contexts.
Status: current Access: read-only
OBJECT-GROUP