RIELLOMDU-MIB
File:
RIELLOMDU-MIB.mib (10798 bytes)
Imported modules
Imported symbols
Defined Types
| MduOutputSockets |
|
| SEQUENCE |
|
|
|
| |
mduOutputLineIndex |
INTEGER |
|
| |
mduOutputCurrent |
INTEGER |
|
| |
mduOutputDisabled |
INTEGER |
|
| |
mduOutputOverload |
INTEGER |
|
| |
mduOutputStatus |
INTEGER |
|
Defined Values
| mduMIB |
1.3.6.1.4.1.5491.11 |
| OBJECT IDENTIFIER |
|
|
|
| mduIdent |
1.3.6.1.4.1.5491.11.1 |
| OBJECT IDENTIFIER |
|
|
|
| mduIdentIOConfiguration |
1.3.6.1.4.1.5491.11.1.4 |
| The mdu input/output configuration (1 for Mono/mono, 4 for Tri/tri). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduIdentOutputSockets |
1.3.6.1.4.1.5491.11.1.6 |
| The number of mdu output sockets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduIdentNominalCurrent |
1.3.6.1.4.1.5491.11.1.7 |
| The mdu nominal current (A). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduIdentNominalVoltage |
1.3.6.1.4.1.5491.11.1.8 |
| The mdu nominal voltage (V). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduIdentNominalFrequency |
1.3.6.1.4.1.5491.11.1.9 |
| The mdu nominal frequency (0.1 Hz). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduStatus |
1.3.6.1.4.1.5491.11.2 |
| OBJECT IDENTIFIER |
|
|
|
| mduLineAFrequency |
1.3.6.1.4.1.5491.11.2.1 |
| The frequency of source A (0.1 Hz). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduLineAVoltage |
1.3.6.1.4.1.5491.11.2.2 |
| The voltage of source 1 (V). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduLineACurrent |
1.3.6.1.4.1.5491.11.2.3 |
| The current of line A (0.1 A). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduOutput |
1.3.6.1.4.1.5491.11.2.4 |
| A list of output table entries. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
MduOutputSockets |
|
| mduOutputSockets |
1.3.6.1.4.1.5491.11.2.4.1 |
| An entry containing information applicable to a
particular output line. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
MduOutputSockets |
|
|
| mduOutputLineIndex |
1.3.6.1.4.1.5491.11.2.4.1.1 |
| The line identifier. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2147483647 |
|
| mduOutputCurrent |
1.3.6.1.4.1.5491.11.2.4.1.2 |
| Output current (0.1 A) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduOutputDisabled |
1.3.6.1.4.1.5491.11.2.4.1.3 |
| 1->line active, 2->line deactivated |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no(1), yes(2) |
|
| mduOutputOverload |
1.3.6.1.4.1.5491.11.2.4.1.4 |
| 1->line ok, 2->line deactivated for overload |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduOutputStatus |
1.3.6.1.4.1.5491.11.2.4.1.5 |
| 0=OFF
1=ON
2= Shutdown active (when a CS or a CR command is received but shutdown is not yet been executed and the 'Imminent time' is not reached)
3= Shutdown imminent (S01 to S08 code)
4= Restore active (when after that a CR command is received and the shutdown has been acted but the restore delay time is not expired)
5= Overload alarm (F01 to F08 code)
6= Locked: OFF for overload (L01 to L08 code) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1), shutdownActive(2), shutdownImminent(3), restoreActive(4), overload(5), locked(6) |
|
| mduPowerFailAux1 |
1.3.6.1.4.1.5491.11.2.9 |
| 1= yes, 0= no. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduPowerFailAux2 |
1.3.6.1.4.1.5491.11.2.10 |
| 1= yes, 0= no. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduManualBypass |
1.3.6.1.4.1.5491.11.2.11 |
| 1= on manual bypass, 0= no. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduTemperature |
1.3.6.1.4.1.5491.11.2.12 |
| The temperature (oC). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduCommand |
1.3.6.1.4.1.5491.11.3 |
| OBJECT IDENTIFIER |
|
|
|
| mduCommandCode |
1.3.6.1.4.1.5491.11.3.1 |
| This object determines the nature of the action to be
taken at the time when the countdown of the
mduShutdownDelay and mduRestoreDelay objects reaches zero.
Setting this object to shutdown(1) indicates that
the specified sockets mduOutputSocketApplyCommand will yurn off.
Setting this object to restore(2) indicates that the specified output
sockets will turn on.
command delete(3) will delete the applied command, test panel will perform
a test of LCD panel and audible alarm |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
shutdown(1), restore(2), commandDelete(3), testPanel(22) |
|
| mduShutdownDelay |
1.3.6.1.4.1.5491.11.3.2 |
| Setting this object will shutdown (i.e., turn off)
either the MDU output socket by the value of mduCommandCode
at the time of shutdown after the indicated number of seconds.
Setting this object to 0 will cause the shutdown to occur
immediately |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduRestoreDelay |
1.3.6.1.4.1.5491.11.3.3 |
| The restore delay. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduOutputSocketApplyCommand |
1.3.6.1.4.1.5491.11.3.4 |
| Specify the socket to apply the command, the value 0 apply to all sockets. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduCommandResult |
1.3.6.1.4.1.5491.11.3.5 |
| The command result, refer to the follow codes:
0+mduCommandCode Command in progress
256+mduCommandCode Wrong Command code
512+mduCommandCode Command is not handled
768+mduCommandCode Parameter out of range
3584+mduCommandCode Command sent to MDU
3840+mduCommandCode Command executed |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| mduTraps |
1.3.6.1.4.1.5491.11.4 |
| OBJECT IDENTIFIER |
|
|
|
| mduNormal |
1 |
| This trap is sent when MDU is on normal status |
| TRAP-TYPE |
|
|
|
| mduAnomaly |
2 |
| This trap is sent when MDU is has some anomaly and is resent every minute |
| TRAP-TYPE |
|
|
|
| mduFault |
3 |
| This trap is sent when MDU is has some fault and is resent every minute |
| TRAP-TYPE |
|
|
|
| mduLock |
4 |
| This trap is sent when MDU is locked and is resent every minute |
| TRAP-TYPE |
|
|
|