REDSTONE-ACCOUNTING-MIB

File: REDSTONE-ACCOUNTING-MIB.mib (12503 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ACCOUNTING-CONTROL-MIB REDSTONE-SMI REDSTONE-IF-MIB
REDSTONE-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP RowStatus
acctngSelectionEntry acctngFileEntry rsMgmt
rsIfType RsAcctngOperType RsAcctngAdminType

Defined Types

RsAcctngSelectionEntry  
SEQUENCE    
  rsAcctngSelectionType BITS
  rsAcctngSelectionMode INTEGER

RsAcctngFileEntry  
SEQUENCE    
  rsAcctngFileXferMode INTEGER
  rsAcctngFileXferIndex INTEGER
  rsAcctngFileXferSecondaryIndex INTEGER

RsAcctngInterfaceEntry  
SEQUENCE    
  rsAcctngInterfaceAdminStatus RsAcctngAdminType
  rsAcctngInterfaceOperStatus RsAcctngOperType
  rsAcctngInterfaceRowStatus RowStatus

Defined Values

rsAcctngMIB 1.3.6.1.4.1.2773.2.24
The accounting MIB for the Redstone Communications Inc. enterprise.
MODULE-IDENTITY    

rsAcctngMIBObjects 1.3.6.1.4.1.2773.2.24.1
OBJECT IDENTIFIER    

rsAcctngSelectionControl 1.3.6.1.4.1.2773.2.24.1.1
OBJECT IDENTIFIER    

rsAcctngFileControl 1.3.6.1.4.1.2773.2.24.1.2
OBJECT IDENTIFIER    

rsAcctngInterfaceControl 1.3.6.1.4.1.2773.2.24.1.3
OBJECT IDENTIFIER    

rsAcctngSelectionTable 1.3.6.1.4.1.2773.2.24.1.1.1
A list of accounting information selection entries. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new file. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsAcctngSelectionEntry

rsAcctngSelectionEntry 1.3.6.1.4.1.2773.2.24.1.1.1.1
An entry used to extend the the selection entry in acctngSelectionEntry. This conceptual row extension is used for Redstone accounting extensions for connectionless data collection.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsAcctngSelectionEntry  

rsAcctngSelectionType 1.3.6.1.4.1.2773.2.24.1.1.1.1.1
Indicates the types of connections for which the information selected by this entry are to be collected. The ietfAccountControl(0) bit position indicates that the acctngSelectionType in the base conceptual row determines the selection type. All other bit positions for this object over-ride the acctngSelectionType in the base conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ietfAccountControl(0), connectionLessLayer2(1)  

rsAcctngSelectionMode 1.3.6.1.4.1.2773.2.24.1.1.1.1.2
Indicates the data collection mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER absoluteCounterValues(1), deltaCounterValues(2)  

rsAcctngFileTable 1.3.6.1.4.1.2773.2.24.1.2.1
A unique value identifying the file transfer behavior and the the file to where accounting data is to be stored.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsAcctngFileEntry

rsAcctngFileEntry 1.3.6.1.4.1.2773.2.24.1.2.1.1
An entry used to extend the file management of acctngFileEntry. This conceptual row extension is used for Redstone accounting extensions to automate the transfer of accounting data to remote hosts.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsAcctngFileEntry  

rsAcctngFileXferMode 1.3.6.1.4.1.2773.2.24.1.2.1.1.1
Indicates the mode to use for transfering accounting data to remote client. rsAcctngManualTransfer Administrator is responsible for manually transfering collected accounting data off of the system. rsAcctngAutomatedTransfer The agent will automatically transfer the collected accounting data based at a rsAcctngFileXferIntervals using an entry in the rsFileXferTable pointed to by rsAcctngFileXferIndex. If a manager sets this object to this value, a corresponding row in the rsFileXferTable must exist, otherwise the set command will fail. rsActngTransferOnFileFull The agent will automatically transfer the collected accounting data when the file reaches the maximum size defined by acctngFileMaximumSize. If a manager sets this object to this value, a corresponding row in the rsFileXferTable must exist, otherwise the set command will fail. rsAcctngRedundantTransfer The agent will automatically transfer two copies of the accounting data based on the rsAcctngFileXferInterval. One copy will go to the rsFileXferTable entry identified by rsAcctngFileXferIndex and one copy will go the the rsFileXferTable entry identified by rsAcctngFileXferSecondaryIndex
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER rsAcctngManualTransfer(1), rsAcctngAutomatedTransfer(2), rsAcctngTransferOnFileFull(3), rsAcctngRedundantTransfer(4)  

rsAcctngFileXferIndex 1.3.6.1.4.1.2773.2.24.1.2.1.1.2
Identifies an entry in the rsFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the rsFileXferTable does not exist or it is not set to rsFileXferAcctngStatistics.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rsAcctngFileXferSecondaryIndex 1.3.6.1.4.1.2773.2.24.1.2.1.1.3
Identifies a backup or secondary entry in the rsFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the rsFileXferTable does not exist or it is not set to rsFileXferAcctngStatistics.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rsAcctngInterfaceTable 1.3.6.1.4.1.2773.2.24.1.3.1
A table controlling the collection of accounting data on specific interfaces types. This table provides an efficient mechanism to enable and/or disable data collection on all interfaces of a specified type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsAcctngInterfaceEntry

rsAcctngInterfaceEntry 1.3.6.1.4.1.2773.2.24.1.3.1.1
An entry which controls whether accounting data is to be collected on interfaces of a specific type.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsAcctngInterfaceEntry  

rsAcctngInterfaceAdminStatus 1.3.6.1.4.1.2773.2.24.1.3.1.1.1
The desired administrative state for accounting data collection for interfaces defined by the type of this entry. The administrative scope is for all interfaces of the type defined by the corresponding rsIfType for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  RsAcctngAdminType  

rsAcctngInterfaceOperStatus 1.3.6.1.4.1.2773.2.24.1.3.1.1.2
The operational state for accounting data collection on for all interfaces corresponding to this entries type.
Status: current Access: read-only
OBJECT-TYPE    
  RsAcctngOperType  

rsAcctngInterfaceRowStatus 1.3.6.1.4.1.2773.2.24.1.3.1.1.3
Controls creation/deletion of entries in this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rsAcctngConformance 1.3.6.1.4.1.2773.2.24.3
OBJECT IDENTIFIER    

rsAcctngGroups 1.3.6.1.4.1.2773.2.24.3.1
OBJECT IDENTIFIER    

rsAcctngCompliances 1.3.6.1.4.1.2773.2.24.3.2
OBJECT IDENTIFIER    

rsAcctngCompliance 1.3.6.1.4.1.2773.2.24.3.2.1
The compliance statement for switches which implement the RedStone Accounting Control MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

rsAcctngBasicGroup 1.3.6.1.4.1.2773.2.24.3.1.1
A collection of objects providing control of the basic collection of accounting data for connection-less networks.
Status: current Access: read-only
OBJECT-GROUP