RC-TRAP-MIB
File:
RC-TRAP-MIB.mib (60561 bytes)
Imported modules
Imported symbols
Defined Values
rcTrapsMib |
1.3.6.1.4.1.2272.1.21.0 |
Enterprise MIB for the Accelar product family. |
MODULE-IDENTITY |
|
|
|
rcnCardDown |
1.3.6.1.4.1.2272.1.21.0.1 |
A rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnCardUp |
1.3.6.1.4.1.2272.1.21.0.2 |
A rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnErrorNotification |
1.3.6.1.4.1.2272.1.21.0.3 |
A rcErrorNotification trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that an error condition has occured. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnStpNewRoot |
1.3.6.1.4.1.2272.1.21.0.4 |
A rcStpNewRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has declared
the device to be the new root of the spanning
tree. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnStpTopologyChange |
1.3.6.1.4.1.2272.1.21.0.5 |
A rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnChasPowerSupplyDown |
1.3.6.1.4.1.2272.1.21.0.6 |
A rcChasPowerSupplyDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnChasFanDown |
1.3.6.1.4.1.2272.1.21.0.7 |
A rcChasFanDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnLinkOscillation |
1.3.6.1.4.1.2272.1.21.0.8 |
A rcLinkOscillation trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected an excessive number of link state
transitions on the specified port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnMacViolation |
1.3.6.1.4.1.2272.1.21.0.9 |
A rcMacViolation trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a PDU with an invalid source MAC
address. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSonetTrap |
1.3.6.1.4.1.2272.1.21.0.10 |
A rcSonetTrap trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected a change of status on a Sonet port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcn2kCardDown |
1.3.6.1.4.1.2272.1.21.0.11 |
A rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcn2kCardUp |
1.3.6.1.4.1.2272.1.21.0.12 |
A rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcn2kTemperature |
1.3.6.1.4.1.2272.1.21.0.13 |
A rc2kTemperature trap signifies that the SNMPv2
entity, acting in an agent role, has detected the
chassis is over-heating. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnChasPowerSupplyUp |
1.3.6.1.4.1.2272.1.21.0.14 |
A rcChasPowerSupplyUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcn2kAtmPvcLinkStateChange |
1.3.6.1.4.1.2272.1.21.0.15 |
A rc2kAtmPvcLinkStateChange trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the rc2kAtmPvcOamVcStatus object for one of PVC is
about to transition into different state, either from
up to down or from down to up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnStpTCN |
1.3.6.1.4.1.2272.1.21.0.16 |
A rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSmltIstLinkUp |
1.3.6.1.4.1.2272.1.21.0.17 |
A rcSmltIstLinkUp trap signifies that the split
MLT link is from down to up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSmltIstLinkDown |
1.3.6.1.4.1.2272.1.21.0.18 |
A rcSmltIstLinkDown trap signifies that the
split MLT link is from up to down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSmltLinkUp |
1.3.6.1.4.1.2272.1.21.0.19 |
A rcMltSmltId trap signifies that the split
SMLT link is up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSmltLinkDown |
1.3.6.1.4.1.2272.1.21.0.20 |
A rcMltSmltId trap signifies that the split
SMLT link is down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnChasFanUp |
1.3.6.1.4.1.2272.1.21.0.21 |
A rcChasFanUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnPasswordChange |
1.3.6.1.4.1.2272.1.21.0.22 |
A rcPasswordChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the one of the cli password is
changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnEmError |
1.3.6.1.4.1.2272.1.21.0.23 |
A rcEmError trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected Em error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnVpnTrap |
1.3.6.1.4.1.2272.1.21.0.24 |
L2Vpn will send trap when the Lsp goes down, which
would affect the operational status of the Vpn (given
by the VpnId). The Cause will indicate the reason for
sending the trap. It can either LSP down/failure or
to the bandwidth requirements cannot be fulfilled.
Severity Level can be Warning/Error/Fatal. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnPcmciaCardRemoved |
1.3.6.1.4.1.2272.1.21.0.25 |
A rcPcmciaRemoved trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the PCMCIA card is being removed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSmartCpldTimerFired |
1.3.6.1.4.1.2272.1.21.0.26 |
A rcSmartCpldTimerFired trap signifies that the
cpld timer fired. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnCardCpldNotUpDate |
1.3.6.1.4.1.2272.1.21.0.27 |
A rcCardCpldNotUpDate trap signifies that the
cpld is not up to date. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnIgapLogFileFull |
1.3.6.1.4.1.2272.1.21.0.28 |
A rcIgapLogFileFull trap signifies that the
Igap accounting time-out Log File reach the
maximum. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnCpLimitShutDown |
1.3.6.1.4.1.2272.1.21.0.29 |
A rcCpLimitShutDown trap signifies that the
cp limit for the port is shutting down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSshServerEnabled |
1.3.6.1.4.1.2272.1.21.0.30 |
A rcSshServerEnabled trap signifies that the
SSH server is enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSshServerDisabled |
1.3.6.1.4.1.2272.1.21.0.31 |
A rcSshServerDisabled trap signifies that the
SSH server is disabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSshSessionLogin |
1.3.6.1.4.1.2272.1.21.0.32 |
A rcSshSessionLogin trap signifies that there
is a SSH session login. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSshSessionLogout |
1.3.6.1.4.1.2272.1.21.0.33 |
A rcSshSessionLogout trap signifies that there
is a SSH session logout. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSshUnauthorizedAccess |
1.3.6.1.4.1.2272.1.21.0.34 |
A rcSshUnauthorizedAccess trap signifies that
an unauthorized access has occured. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnHaCpuState |
1.3.6.1.4.1.2272.1.21.0.35 |
A rcHaCpuState trap signifies that the
state of the HA-CPU. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnInsufficientMemory |
1.3.6.1.4.1.2272.1.21.0.36 |
A rcInsufficientMemory trap indicates insufficient memory on
CPU blade for proper operation. Recommended memory = 256 MB
available through Nortel Networks upgrade kit |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSaveConfigAction |
1.3.6.1.4.1.2272.1.21.0.37 |
A rcSaveConfigAction trap indicates the switch run
time or boot configuration is being saved |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnLoopDetectOnPort |
1.3.6.1.4.1.2272.1.21.0.38 |
A rcnLoopDetectOnPort trap indicates that a loop has
been detected on a port. The vlan on that port will
be disabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnbgpEstablished |
1.3.6.1.4.1.2272.1.21.0.39 |
The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnbgpBackwardTransition |
1.3.6.1.4.1.2272.1.21.0.40 |
The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnAggLinkUp |
1.3.6.1.4.1.2272.1.21.0.41 |
A rcAggLinkUp trap is generated when the operational
state of the aggregator changes from down to up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnAggLinkDown |
1.3.6.1.4.1.2272.1.21.0.42 |
A rcAggLinkDown trap is generated when the operational
state of the aggregator changes from up to down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnIgmpNewGroupMember |
1.3.6.1.4.1.2272.1.21.0.43 |
An IgmpNewGroupMember trap signifies that a
new member has come on an interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnIgmpLossGroupMember |
1.3.6.1.4.1.2272.1.21.0.44 |
An IgmpLossGroupMember trap signifies that a
group member has been lost on an interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnIgmpNewQuerier |
1.3.6.1.4.1.2272.1.21.0.45 |
An igmpNewQuerier trap signifies that a new
querier has come up on an interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnIgmpQuerierChange |
1.3.6.1.4.1.2272.1.21.0.46 |
An rcIgmpQuerierChange trap signifies that
the querier has changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnDvmrpIfStateChange |
1.3.6.1.4.1.2272.1.21.0.47 |
A rcDvmrpIfStateChange trap signifies that there
has been a change in the state of a DVMRP
interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnDvmrpNewNbrChange |
1.3.6.1.4.1.2272.1.21.0.48 |
A rcDvmrpNewNbrChange trap signifies that a new
neighbor has come up on a DVMRP interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnDvmrpNbrLossChange |
1.3.6.1.4.1.2272.1.21.0.49 |
A rcDvmrpNbrLossChange trap signifies that a new
neighbor has gone down on a DVMRP interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnPsePortOnOff |
1.3.6.1.4.1.2272.1.21.0.50 |
A rcPsePortOnOff trap signifies that if
Pse Port is delivering or not power to the
This Notification SHOULD be sent on every
status change except in the searching mode. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnPsePortPowerMaintenanceStatus |
1.3.6.1.4.1.2272.1.21.0.51 |
A rcPsePortPowerMaintenanceStatus trap
signifies that a Port change Status and
it SHOULD be sent on every status change. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnMainPseBackupActivate |
1.3.6.1.4.1.2272.1.21.0.52 |
A rcMainPseBackupActivate trap signifies that
a Backup is Activated or BackUp is released
on a Pse Port Group. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnMainPowerUsageOn |
1.3.6.1.4.1.2272.1.21.0.53 |
A rcMainPowerUsageOn trap signifies that
PSE Threshold Usage indication of a PSE
Port Group is on, the usage power is above
the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnMainPowerUsageOff |
1.3.6.1.4.1.2272.1.21.0.54 |
A rcMainPowerUsageOn trap signifies that
PSE Threshold Usage indication of a PSE
Port Group is off, the usage power is above
the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnPseCardOnOff |
1.3.6.1.4.1.2272.1.21.0.55 |
A rcPoeMainPwrFailure trap signifies that the
main power admin status is up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTlsWatermarkTrap |
1.3.6.1.4.1.2272.1.21.0.56 |
A Watermark trap signifies that the Mac Table for the
endpoint has reached its high watermark or is already
full. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTdcTestResultTrap |
1.3.6.1.4.1.2272.1.21.0.57 |
A Tdc test fail trap indicates that the tdc test
test identified by test ID failed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTdcTestRttExceedTrap |
1.3.6.1.4.1.2272.1.21.0.58 |
A Tdc Rtt Exceed trap indicates that the round trip
time of the tdc test identified by test ID exceeded
the configured threshold value. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnFdbProtectViolation |
1.3.6.1.4.1.2272.1.21.0.59 |
The rcFdbProtectViolation trap signifies that the
port has violated the user configured limit for
total number of fdb-entries learned on that port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnLogMsgControl |
1.3.6.1.4.1.2272.1.21.0.60 |
A rcMsgControl trap signifies whether the number of times of
repeatation of the particular Log message has exceeded
the particular frequency/count or not. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnSaveConfigFile |
1.3.6.1.4.1.2272.1.21.0.61 |
A rcSaveConfig trap signifies that either the
runtime config or the boot config has been saved
on the switch |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnDNSRequestResponse |
1.3.6.1.4.1.2272.1.21.0.62 |
A rcDnsRequestResponse trap signifies that the
switch had sent a query to the DNS server or it had
received a successful response from the DNS Server |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnDuplicateIpAddress |
1.3.6.1.4.1.2272.1.21.0.63 |
A rcDuplicateIpAddressTrap signifies that a duplicate IP
address is detected on the subnet |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnLoopDetectPortDown |
1.3.6.1.4.1.2272.1.21.0.64 |
A rcLoopDetectPortDown trap signifies that a loop has
been detected on a port and the port is going to shut down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnUnauthorizedAccessToStandByCPU |
1.3.6.1.4.1.2272.1.21.0.65 |
A rcnUnauthorizedAccessToStandByCPU trap
signifies that the user attempt to access
standby CPU. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTlsPortWatermarkTrap |
1.3.6.1.4.1.2272.1.21.0.66 |
A Watermark trap signifies that the
Mac Table for the port has reached its high watermark or already full |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnLoopDetectMacDiscard |
1.3.6.1.4.1.2272.1.21.0.67 |
A rcLoopDetectMacDiscard trap signifies that a loop
has been Detected on a port and the mac address will
be discarded on all ports in that vlan |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnAutoRecoverPort |
1.3.6.1.4.1.2272.1.21.0.68 |
A rcnAutoRecoverPort trap signifies that autorecover
has re-enabled a port disabled by link flap or cp limit |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnAutoRecoverLoopDetectedPort |
1.3.6.1.4.1.2272.1.21.0.69 |
A rcnAutoRecoverPort trap signifies that autorecover
has cleared the action taken on a port by loop detect |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnExtCpLimitShutDown |
1.3.6.1.4.1.2272.1.21.0.70 |
A rcnExtCpLimitShutDown trap signifies that
port is shut down due to Extended CP-Limit. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnExtCpLimitSopCongestion |
1.3.6.1.4.1.2272.1.21.0.71 |
A rcnExtCpLimitSopCongestion signifies that system octapid
polling finds that system octapid is congested or not.
rcSysExtCplimitSysOctapidCongested signifies whether
system octapid is congested or not.
rcSysExtCplimitPortsMonitored signifies whether ports are
selected for monitoring the ingress traffic utilization. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnNonEapIntrusion |
1.3.6.1.4.1.2272.1.21.0.72 |
A rcNonEapIntrusion trap signifies that the
an intrusion has occurred in the port. This occurs when
the number of non-eap clients exceed the maximum allowed
non-eap clients on the port |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTlsUniIpServiceWatermarkTrap |
1.3.6.1.4.1.2272.1.21.0.73 |
A Watermark trap signifies that the Ip Table for the Uni Ip Service (Cust Ip)
has reached its high watermark or already full |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTacacsAuthFailure |
1.3.6.1.4.1.2272.1.21.0.74 |
TACACS+ authentication failed for user |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTacacsNoServers |
1.3.6.1.4.1.2272.1.21.0.75 |
Unable to use any TACACS+ servers for authentication |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTacacsRxUnsupportedFrame |
1.3.6.1.4.1.2272.1.21.0.76 |
Received unsupported frame from TACACS+ server |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTacacsExceededMaxLogins |
1.3.6.1.4.1.2272.1.21.0.77 |
Attempted to exceed the maximum number of allowed TACACS+ logins |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnTacacsClientFailure |
1.3.6.1.4.1.2272.1.21.0.78 |
TACACS+ Client application is down |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnBpduReceived |
1.3.6.1.4.1.2272.1.21.0.79 |
This notification will be generated when a BPDU is
received on a port which has BPDU filtering enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnVlacpPortDown |
1.3.6.1.4.1.2272.1.21.0.80 |
A rcnVlacpPortDown trap signifies that
Vlacp is down on the port specified. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnVlacpPortUp |
1.3.6.1.4.1.2272.1.21.0.81 |
A rcnVlacpPortUp trap signifies that
Vlacp is Up on the port specified. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnExtCpLimitShutDownNormal |
1.3.6.1.4.1.2272.1.21.0.82 |
An rcnExtCpLimitShutDownNormal trap signifies that
Ports are shut down due to Extended CP-Limit in Normal mode. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcnEapMacIntrusion |
1.3.6.1.4.1.2272.1.21.0.83 |
A rcnEapMacIntrusion trap signifies that
an EAP MAC intrusion had occurred on this port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcCardDown |
1.3.6.1.4.1.2272.1.21.1 |
A rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcCardUp |
1.3.6.1.4.1.2272.1.21.2 |
A rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcErrorNotification |
1.3.6.1.4.1.2272.1.21.3 |
A rcErrorNotification trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that an error condition has occured. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcStpNewRoot |
1.3.6.1.4.1.2272.1.21.4 |
A rcStpNewRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has declared
the device to be the new root of the spanning
tree. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcStpTopologyChange |
1.3.6.1.4.1.2272.1.21.5 |
A rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcChasPowerSupplyDown |
1.3.6.1.4.1.2272.1.21.6 |
A rcChasPowerSupplyDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcChasFanDown |
1.3.6.1.4.1.2272.1.21.7 |
A rcChasFanDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcLinkOscillation |
1.3.6.1.4.1.2272.1.21.8 |
A rcLinkOscillation trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected an excessive number of link state
transitions on the specified port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcMacViolation |
1.3.6.1.4.1.2272.1.21.9 |
A rcMacViolation trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a PDU with an invalid source MAC
address. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSonetTrap |
1.3.6.1.4.1.2272.1.21.10 |
A rcSonetTrap trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected a change of status on a Sonet port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rc2kCardDown |
1.3.6.1.4.1.2272.1.21.11 |
A rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rc2kCardUp |
1.3.6.1.4.1.2272.1.21.12 |
A rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rc2kTemperature |
1.3.6.1.4.1.2272.1.21.13 |
A rc2kTemperature trap signifies that the SNMPv2
entity, acting in an agent role, has detected the
chassis is over-heating. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcChasPowerSupplyUp |
1.3.6.1.4.1.2272.1.21.14 |
A rcChasPowerSupplyUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rc2kAtmPvcLinkStateChange |
1.3.6.1.4.1.2272.1.21.15 |
A rc2kAtmPvcLinkStateChange trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the rc2kAtmPvcOamVcStatus object for one of PVC is
about to transition into different state, either from
up to down or from down to up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcStpTCN |
1.3.6.1.4.1.2272.1.21.16 |
A rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSmltIstLinkUp |
1.3.6.1.4.1.2272.1.21.17 |
A rcSmltIstLinkUp trap signifies that the split
MLT link is from down to up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSmltIstLinkDown |
1.3.6.1.4.1.2272.1.21.18 |
A rcSmltIstLinkDown trap signifies that the
split MLT link is from up to down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSmltLinkUp |
1.3.6.1.4.1.2272.1.21.19 |
A rcMltSmltId trap signifies that the split
SMLT link is up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSmltLinkDown |
1.3.6.1.4.1.2272.1.21.20 |
A rcMltSmltId trap signifies that the split
SMLT link is down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcChasFanUp |
1.3.6.1.4.1.2272.1.21.21 |
A rcChasFanUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the up state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcPasswordChange |
1.3.6.1.4.1.2272.1.21.22 |
A rcPasswordChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the one of the cli password is
changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcEmError |
1.3.6.1.4.1.2272.1.21.23 |
A rcEmError trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected Em error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcVpnTrap |
1.3.6.1.4.1.2272.1.21.24 |
L2Vpn will send trap when the Lsp goes down, which
would affect the operational status of the Vpn (given
by the VpnId). The Cause will indicate the reason for
sending the trap. It can either LSP down/failure or
to the bandwidth requirements cannot be fulfilled.
Severity Level can be Warning/Error/Fatal. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcPcmciaCardRemoved |
1.3.6.1.4.1.2272.1.21.25 |
A rcPcmciaRemoved trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the PCMCIA card is being removed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSmartCpldTimerFired |
1.3.6.1.4.1.2272.1.21.26 |
A rcSmartCpldTimerFired trap signifies that the
cpld timer fired. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcCardCpldNotUpDate |
1.3.6.1.4.1.2272.1.21.27 |
A rcCardCpldNotUpDate trap signifies that the
cpld is not up to date. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcIgapLogFileFull |
1.3.6.1.4.1.2272.1.21.28 |
A rcIgapLogFileFull trap signifies that the
Igap accounting time-out Log File reach the
maximum. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcCpLimitShutDown |
1.3.6.1.4.1.2272.1.21.29 |
A rcCpLimitShutDown trap signifies that the
cp limit for the port is shutting down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSshServerEnabled |
1.3.6.1.4.1.2272.1.21.30 |
A rcSshServerEnabled trap signifies that the
SSH server is enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSshServerDisabled |
1.3.6.1.4.1.2272.1.21.31 |
A rcSshServerDisabled trap signifies that the
SSH server is disabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSshSessionLogin |
1.3.6.1.4.1.2272.1.21.32 |
A rcSshSessionLogin trap signifies that there
is a SSH session login. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSshSessionLogout |
1.3.6.1.4.1.2272.1.21.33 |
A rcSshSessionLogout trap signifies that there
is a SSH session logout. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSshUnauthorizedAccess |
1.3.6.1.4.1.2272.1.21.34 |
A rcSshUnauthorizedAccess trap signifies that
an unauthorized access has occured. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcHaCpuState |
1.3.6.1.4.1.2272.1.21.35 |
A rcHaCpuState trap signifies that the
state of the HA-CPU. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcInsufficientMemory |
1.3.6.1.4.1.2272.1.21.36 |
A rcInsufficientMemory trap indicates insufficient memory on
CPU blade for proper operation. Recommended memory = 256 MB
available through Nortel Networks upgrade kit |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcSaveConfigAction |
1.3.6.1.4.1.2272.1.21.37 |
A rcSaveConfigAction trap indicates the switch run
time or boot configuration is being saved |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcLoopDetectOnPort |
1.3.6.1.4.1.2272.1.21.38 |
A rcSaveConfigAction trap indicates that a loop has
been detected on a port. The vlan on that port will
be disabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
cbgpEstablished |
1.3.6.1.4.1.2272.1.21.39 |
The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcbgpBackwardTransition |
1.3.6.1.4.1.2272.1.21.40 |
The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcAggLinkUp |
1.3.6.1.4.1.2272.1.21.41 |
A rcAggLinkUp trap is generated when the operational
state of the aggregator changes from down to up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcAggLinkDown |
1.3.6.1.4.1.2272.1.21.42 |
A rcAggLinkDown trap is generated when the operational
state of the aggregator changes from up to down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcIgmpNewGroupMember |
1.3.6.1.4.1.2272.1.21.43 |
An IgmpNewGroupMember trap signifies that a
new member has come on an interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcIgmpLossGroupMember |
1.3.6.1.4.1.2272.1.21.44 |
An IgmpLossGroupMember trap signifies that a
group member has been lost on an interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcIgmpNewQuerier |
1.3.6.1.4.1.2272.1.21.45 |
An igmpNewQuerier trap signifies that a new
querier has come up on an interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcIgmpQuerierChange |
1.3.6.1.4.1.2272.1.21.46 |
An rcIgmpQuerierChange trap signifies that
the querier has changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcDvmrpIfStateChange |
1.3.6.1.4.1.2272.1.21.47 |
A rcDvmrpIfStateChange trap signifies that there
has been a change in the state of a DVMRP
interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcDvmrpNewNbrChange |
1.3.6.1.4.1.2272.1.21.48 |
A rcDvmrpNewNbrChange trap signifies that a new
neighbor has come up on a DVMRP interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcDvmrpNbrLossChange |
1.3.6.1.4.1.2272.1.21.49 |
A rcDvmrpNbrLossChange trap signifies that a new
neighbor has gone down on a DVMRP interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcPsePortOnOff |
1.3.6.1.4.1.2272.1.21.50 |
A rcPsePortOnOff trap signifies that if Pse Port is delivering or not power to the
This Notification SHOULD be sent on every status change except in the searching mode. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcPsePortPowerMaintenanceStatus |
1.3.6.1.4.1.2272.1.21.51 |
A rcPsePortPowerMaintenanceStatus trap signifies that a Port change Status
and it SHOULD be sent on every status change. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcMainPseBackupActivate |
1.3.6.1.4.1.2272.1.21.52 |
A rcMainPseBackupActivate trap signifies that
a Backup is Activated or BackUp is released on a Pse Port Group. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcMainPowerUsageOn |
1.3.6.1.4.1.2272.1.21.53 |
A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication
of a PSE Port Group is on, the usage power is above the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcMainPowerUsageOff |
1.3.6.1.4.1.2272.1.21.54 |
A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication
of a PSE Port Group is off, the usage power is above the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcPseCardOnOff |
1.3.6.1.4.1.2272.1.21.55 |
A rcPoeMainPwrFailure trap signifies that the main power admin status is up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcTlsWatermarkTrap |
1.3.6.1.4.1.2272.1.21.56 |
A Watermark trap signifies that the Mac Table for the
endpoint has reached its high watermark or is already full. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcTdcTestResultTrap |
1.3.6.1.4.1.2272.1.21.57 |
A Tdc test fail trap indicates that the tdc test test identified by test ID failed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rcTdcTestRttExceedTrap |
1.3.6.1.4.1.2272.1.21.58 |
A Tdc Rtt Exceed trap indicates that the round trip
time of the tdc test identified by test ID exceeded the configured threshold value. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|