RC-IP-POLICY-MIB

File: RC-IP-POLICY-MIB.mib (103464 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RC-IP-MIB
RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
IpAddress DisplayString TruthValue
RowStatus rcIpPolicy rcIpGenPolicy
EnableValue

Defined Types

RcIpPolicyAddrEntry  
SEQUENCE    
  rcIpPolicyAddrIpAddr IpAddress
  rcIpPolicyAddrId Integer32
  rcIpPolicyAddrAddrListIdListSize INTEGER
  rcIpPolicyAddrAddrListIdList OCTET STRING
  rcIpPolicyAddrRowStatus RowStatus

RcIpPolicyNetEntry  
SEQUENCE    
  rcIpPolicyNetAddr IpAddress
  rcIpPolicyNetMask IpAddress
  rcIpPolicyNetId Integer32
  rcIpPolicyNetNetListIdListSize INTEGER
  rcIpPolicyNetNetListIdList OCTET STRING
  rcIpPolicyNetRowStatus RowStatus

RcIpPolicyAddrListEntry  
SEQUENCE    
  rcIpPolicyAddrListId INTEGER
  rcIpPolicyAddrListName DisplayString
  rcIpPolicyAddrListIdListSize INTEGER
  rcIpPolicyAddrListIdList OCTET STRING
  rcIpPolicyAddrListPolicyIdListSize INTEGER
  rcIpPolicyAddrListPolicyIdList OCTET STRING
  rcIpPolicyAddrListRowStatus RowStatus

RcIpPolicyRipAnnounceEntry  
SEQUENCE    
  rcIpPolicyRipAnnounceId INTEGER
  rcIpPolicyRipAnnounceName DisplayString
  rcIpPolicyRipAnnounceEnable TruthValue
  rcIpPolicyRipAnnounceExactNetListId INTEGER
  rcIpPolicyRipAnnounceRangeNetListId INTEGER
  rcIpPolicyRipAnnounceRipGatewayListId INTEGER
  rcIpPolicyRipAnnounceRipInterfaceListId INTEGER
  rcIpPolicyRipAnnounceOspfRouterListId INTEGER
  rcIpPolicyRipAnnounceAnnounceInterfaceListId INTEGER
  rcIpPolicyRipAnnouncePrecedence INTEGER
  rcIpPolicyRipAnnounceRouteSource INTEGER
  rcIpPolicyRipAnnounceAdvertiseNetListId INTEGER
  rcIpPolicyRipAnnounceAction INTEGER
  rcIpPolicyRipAnnounceOspfRouteType INTEGER
  rcIpPolicyRipAnnounceRipMetric INTEGER
  rcIpPolicyRipAnnounceRowStatus RowStatus

RcIpPolicyOspfAnnounceEntry  
SEQUENCE    
  rcIpPolicyOspfAnnounceId INTEGER
  rcIpPolicyOspfAnnounceName DisplayString
  rcIpPolicyOspfAnnounceEnable TruthValue
  rcIpPolicyOspfAnnounceExactNetListId INTEGER
  rcIpPolicyOspfAnnounceRangeNetListId INTEGER
  rcIpPolicyOspfAnnounceRipGatewayListId INTEGER
  rcIpPolicyOspfAnnounceRipInterfaceListId INTEGER
  rcIpPolicyOspfAnnouncePrecedence INTEGER
  rcIpPolicyOspfAnnounceRouteSource INTEGER
  rcIpPolicyOspfAnnounceAdvertiseNetListId INTEGER
  rcIpPolicyOspfAnnounceAction INTEGER
  rcIpPolicyOspfAnnounceExtMetricType INTEGER
  rcIpPolicyOspfAnnounceExtMetric INTEGER
  rcIpPolicyOspfAnnounceRowStatus RowStatus

RcIpPolicyRipAcceptEntry  
SEQUENCE    
  rcIpPolicyRipAcceptId INTEGER
  rcIpPolicyRipAcceptName DisplayString
  rcIpPolicyRipAcceptEnable TruthValue
  rcIpPolicyRipAcceptExactNetListId INTEGER
  rcIpPolicyRipAcceptRangeNetListId INTEGER
  rcIpPolicyRipAcceptRipGatewayListId INTEGER
  rcIpPolicyRipAcceptRipInterfaceListId INTEGER
  rcIpPolicyRipAcceptPrecedence INTEGER
  rcIpPolicyRipAcceptAction INTEGER
  rcIpPolicyRipAcceptInjectNetListId INTEGER
  rcIpPolicyRipAcceptApplyMask IpAddress
  rcIpPolicyRipAcceptRowStatus RowStatus

RcIpPolicyOspfAcceptEntry  
SEQUENCE    
  rcIpPolicyOspfAcceptId INTEGER
  rcIpPolicyOspfAcceptName DisplayString
  rcIpPolicyOspfAcceptEnable TruthValue
  rcIpPolicyOspfAcceptExactNetListId INTEGER
  rcIpPolicyOspfAcceptRangeNetListId INTEGER
  rcIpPolicyOspfAcceptPrecedence INTEGER
  rcIpPolicyOspfAcceptAction INTEGER
  rcIpPolicyOspfAcceptInjectNetListId INTEGER
  rcIpPolicyOspfAcceptExtType INTEGER
  rcIpPolicyOspfAcceptRowStatus RowStatus

RcIpPolicyNetListEntry  
SEQUENCE    
  rcIpPolicyNetListId INTEGER
  rcIpPolicyNetListName DisplayString
  rcIpPolicyNetListIdListSize INTEGER
  rcIpPolicyNetListIdList OCTET STRING
  rcIpPolicyNetListPolicyIdListSize INTEGER
  rcIpPolicyNetListPolicyIdList OCTET STRING
  rcIpPolicyNetListRowStatus RowStatus

RcIpAsPathAccessListEntry  
SEQUENCE    
  rcIpAsPathAccessListId INTEGER
  rcIpAsPathAccessListMemberId INTEGER
  rcIpAsPathAccessListMode INTEGER
  rcIpAsPathAccessListAsRegularExpression OCTET STRING
  rcIpAsPathAccessListRowStatus RowStatus

RcIpCommunityAccessListEntry  
SEQUENCE    
  rcIpCommunityAccessListId INTEGER
  rcIpCommunityAccessListMemberId INTEGER
  rcIpCommunityAccessListMode INTEGER
  rcIpCommunityAccessListCommunity OCTET STRING
  rcIpCommunityAccessListRowStatus RowStatus

RcIpAccessListEntry  
SEQUENCE    
  rcIpAccessListId INTEGER
  rcIpAccessListMode INTEGER
  rcIpAccessListNetwork IpAddress
  rcIpAccessListNetworkMask IpAddress
  rcIpAccessListName DisplayString
  rcIpAccessListRowStatus RowStatus

RcIpExtendedAccessListEntry  
SEQUENCE    
  rcIpExtendedAccessListId INTEGER
  rcIpExtendedAccessListMode INTEGER
  rcIpExtendedAccessListNetwork IpAddress
  rcIpExtendedAccessListNetworkWildCard IpAddress
  rcIpExtendedAccessListNetworkMask IpAddress
  rcIpExtendedAccessListNetworkMaskWildCard IpAddress
  rcIpExtendedAccessListName DisplayString
  rcIpExtendedAccessListRowStatus RowStatus

RcIpPrefixListEntry  
SEQUENCE    
  rcIpPrefixListId Integer32
  rcIpPrefixListPrefix IpAddress
  rcIpPrefixListPrefixMaskLen INTEGER
  rcIpPrefixListMaskLenFrom INTEGER
  rcIpPrefixListMaskLenUpto INTEGER
  rcIpPrefixListName DisplayString
  rcIpPrefixListRowStatus RowStatus

RcIpRoutePolicyEntry  
SEQUENCE    
  rcIpRoutePolicyId Integer32
  rcIpRoutePolicySequenceNumber Integer32
  rcIpRoutePolicyName DisplayString
  rcIpRoutePolicyEnable TruthValue
  rcIpRoutePolicyMode INTEGER
  rcIpRoutePolicyMatchProtocol INTEGER
  rcIpRoutePolicyMatchAsPath DisplayString
  rcIpRoutePolicyMatchCommunity DisplayString
  rcIpRoutePolicyMatchCommunityExact EnableValue
  rcIpRoutePolicyMatchNetwork DisplayString
  rcIpRoutePolicyMatchIpRouteSource DisplayString
  rcIpRoutePolicyMatchNextHop DisplayString
  rcIpRoutePolicyMatchInterface DisplayString
  rcIpRoutePolicyMatchRouteType INTEGER
  rcIpRoutePolicyMatchMetric INTEGER
  rcIpRoutePolicyMatchTag DisplayString
  rcIpRoutePolicySetRoutePreference INTEGER
  rcIpRoutePolicySetAsPath DisplayString
  rcIpRoutePolicySetAsPathMode INTEGER
  rcIpRoutePolicySetAutomaticTag EnableValue
  rcIpRoutePolicySetCommunityNumber DisplayString
  rcIpRoutePolicySetCommunityMode INTEGER
  rcIpRoutePolicySetMetricTypeInternal Integer32
  rcIpRoutePolicySetMetric INTEGER
  rcIpRoutePolicySetMetricType INTEGER
  rcIpRoutePolicySetNextHop IpAddress
  rcIpRoutePolicySetOrigin INTEGER
  rcIpRoutePolicySetLocalPref Integer32
  rcIpRoutePolicySetOriginEgpAs Integer32
  rcIpRoutePolicySetTag Integer32
  rcIpRoutePolicySetWeight Integer32
  rcIpRoutePolicySetInjectNetList DisplayString
  rcIpRoutePolicyRowStatus RowStatus
  rcIpRoutePolicySetMask IpAddress
  rcIpRoutePolicyNssaPbit EnableValue

RcIpRedistributeEntry  
SEQUENCE    
  rcIpRedistributeProtocol INTEGER
  rcIpRedistributeRouteSource INTEGER
  rcIpRedistributeEnable EnableValue
  rcIpRedistributeMetric INTEGER
  rcIpRedistributeMetricType INTEGER
  rcIpRedistributeMatchRouteType INTEGER
  rcIpRedistributeSetTag Integer32
  rcIpRedistributeSubnets INTEGER
  rcIpRedistributeRoutePolicy DisplayString
  rcIpRedistributeASNumber Integer32
  rcIpRedistributeWeight Integer32
  rcIpRedistributeDefaultOriginate Integer32
  rcIpRedistributeRowStatus RowStatus
  rcIpRedistributeLevel INTEGER

RcIpOspfInFilterEntry  
SEQUENCE    
  rcIpOspfInFilterAdvertisingRtr IpAddress
  rcIpOspfInFilterEnable EnableValue
  rcIpOspfInFilterMetricType INTEGER
  rcIpOspfInFilterPolicyName DisplayString
  rcIpOspfInFilterRowStatus RowStatus

RcIpRoutePrefEntry  
SEQUENCE    
  rcIpRoutePrefProtocol INTEGER
  rcIpRoutePrefDefault INTEGER
  rcIpRoutePrefConfigured INTEGER

Defined Values

rcIpPolicyMib 1.3.6.1.4.1.2272.1.8.11.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcIpPolicyAddrTableSize 1.3.6.1.4.1.2272.1.8.11.1
Used to indicate the number of entries in the rcIpPolicyAddrTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyAddrTable 1.3.6.1.4.1.2272.1.8.11.2
A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyAddrEntry

rcIpPolicyAddrEntry 1.3.6.1.4.1.2272.1.8.11.2.1
Route entry attributes.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyAddrEntry  

rcIpPolicyAddrIpAddr 1.3.6.1.4.1.2272.1.8.11.2.1.1
The network address for this type of list entry. This value is required for all types of lists.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPolicyAddrId 1.3.6.1.4.1.2272.1.8.11.2.1.2
Identifier of this entry. Used internally to identify this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyAddrAddrListIdListSize 1.3.6.1.4.1.2272.1.8.11.2.1.3
Used to indicate the number of id(s) in the rcIpPolicyAddrListIdList variable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyAddrAddrListIdList 1.3.6.1.4.1.2272.1.8.11.2.1.4
Used to indicate zero or more rcIpPolicyAddrListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcIpPolicyAddrRowStatus 1.3.6.1.4.1.2272.1.8.11.2.1.5
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyNetTableSize 1.3.6.1.4.1.2272.1.8.11.3
Used to indicate the number of entries in the rcIpPolicyNetTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyNetTable 1.3.6.1.4.1.2272.1.8.11.4
A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyNetEntry

rcIpPolicyNetEntry 1.3.6.1.4.1.2272.1.8.11.4.1
Route entry attributes.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyNetEntry  

rcIpPolicyNetAddr 1.3.6.1.4.1.2272.1.8.11.4.1.1
The network address for this type of list entry. This value is required for all types of lists.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPolicyNetMask 1.3.6.1.4.1.2272.1.8.11.4.1.2
The route mask for this type of list entry. This value is meaningful only if rcIpPolicyNetEntry is equal to exactNet(1), rangeNet(2), advertiseNet(3). For other types it should have the value 0.0.0.0.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPolicyNetId 1.3.6.1.4.1.2272.1.8.11.4.1.3
Used internally to recognize this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyNetNetListIdListSize 1.3.6.1.4.1.2272.1.8.11.4.1.4
Used to indicate the number of id(s) in the rcIpPolicyNetListIdList variable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyNetNetListIdList 1.3.6.1.4.1.2272.1.8.11.4.1.5
Used to indicate zero or more rcIpPolicyNetListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcIpPolicyNetRowStatus 1.3.6.1.4.1.2272.1.8.11.4.1.6
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyAddrListTableSize 1.3.6.1.4.1.2272.1.8.11.5
Used to indicate the number of entries in the rcIpPolicyAddrListTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyAddrListTable 1.3.6.1.4.1.2272.1.8.11.6
A table used to group rcIpPolicyAddrEntry(s) into a list.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyAddrListEntry

rcIpPolicyAddrListEntry 1.3.6.1.4.1.2272.1.8.11.6.1
Route entry attributes.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyAddrListEntry  

rcIpPolicyAddrListId 1.3.6.1.4.1.2272.1.8.11.6.1.1
A value that uniquely identifies this list of rcIpPolicyAddrListEntry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpPolicyAddrListName 1.3.6.1.4.1.2272.1.8.11.6.1.3
An administratively-assigned name for this list.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

rcIpPolicyAddrListIdListSize 1.3.6.1.4.1.2272.1.8.11.6.1.4
Used to indicate the number of rcIpPolicyAddrNetEntry id(s) in the rcIpPolicyAddrListIdList variable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyAddrListIdList 1.3.6.1.4.1.2272.1.8.11.6.1.5
Used to indicate zero or more AddrListId that are associated to this list. Each AddrList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcIpPolicyAddrListPolicyIdListSize 1.3.6.1.4.1.2272.1.8.11.6.1.6
Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyAddrListPolicyIdList 1.3.6.1.4.1.2272.1.8.11.6.1.7
Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcIpPolicyAddrListRowStatus 1.3.6.1.4.1.2272.1.8.11.6.1.8
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyRipAnnounceTableSize 1.3.6.1.4.1.2272.1.8.11.7
Used to indicate the number of entries in the rcIpPolicyRipAnnounceTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyRipAnnounceTable 1.3.6.1.4.1.2272.1.8.11.8
A table used to store set of announce policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyRipAnnounceEntry

rcIpPolicyRipAnnounceEntry 1.3.6.1.4.1.2272.1.8.11.8.1
Entry containing configuration information for a particular announce policy.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyRipAnnounceEntry  

rcIpPolicyRipAnnounceId 1.3.6.1.4.1.2272.1.8.11.8.1.1
A value that uniquely identifies the policy associated with this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpPolicyRipAnnounceName 1.3.6.1.4.1.2272.1.8.11.8.1.2
An administratively-assigned name for this policy.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

rcIpPolicyRipAnnounceEnable 1.3.6.1.4.1.2272.1.8.11.8.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPolicyRipAnnounceExactNetListId 1.3.6.1.4.1.2272.1.8.11.8.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular announce policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'. If set to '0', this policy applies to all the routes.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceRangeNetListId 1.3.6.1.4.1.2272.1.8.11.8.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. If set to '0', this policy applies to all the routes.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceRipGatewayListId 1.3.6.1.4.1.2272.1.8.11.8.1.6
Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-routers (other side of the interface) addresses that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates received from any rip routers/interfaces.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceRipInterfaceListId 1.3.6.1.4.1.2272.1.8.11.8.1.7
Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-interface addresses on this router. If an interface address is incuded in this list, this policy applies to RIP advertisements received on that interface. A value of '0' indicates thtat this policy applies to RIP updates received on any rip-interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceOspfRouterListId 1.3.6.1.4.1.2272.1.8.11.8.1.8
Used to indicate the number of entries in the OspfRouteIds that are configured for this policy. This field has meaning only for OSPF sourced routes and if OSPF is included as a RouteSource. The list contains one or more router IDs of OSPF routers. If a routerId is included in this list, this policy applies to OSPF advertisements received from that router. A value of '0' indicates that this policy applies to any OPSF routes received from any router.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceAnnounceInterfaceListId 1.3.6.1.4.1.2272.1.8.11.8.1.9
Used to indicate the number of entries in the AnnounceInterfaceids that are configured for this policy. The list contains one or more outbound interface addresses. If the outbound interface address in this list, the policy applies to RIP updates/advertisements sent through this interface. A value of '0' indicates that this policy applies to any outbound RIP interface on this router.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnouncePrecedence 1.3.6.1.4.1.2272.1.8.11.8.1.10
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyRipAnnounceRouteSource 1.3.6.1.4.1.2272.1.8.11.8.1.11
Is represented as bitset to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will match the policy.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(4), ospf(8), any(15)  

rcIpPolicyRipAnnounceAdvertiseNetListId 1.3.6.1.4.1.2272.1.8.11.8.1.12
Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks that differ from actual network in the routing table. Also allows advertisement of an aggregate or default along with the actual network. Aggregation is useful if a number of routes in the table falls in a certain range. Can save space by sending aggregate route instead of the individual routes. Actual network/route is included in the update only if there is a match or there there is an entry (address & mask pair) 255.255.255.255/255.255.255.255 in the list.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceAction 1.3.6.1.4.1.2272.1.8.11.8.1.13
It indicates whether the route should be announced or not.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER announce(1), ignore(2)  

rcIpPolicyRipAnnounceOspfRouteType 1.3.6.1.4.1.2272.1.8.11.8.1.14
Ospf Route type. It applies to OSPF sourced routes only. 'type1' means to apply this policy to only type1 OSPF external routes. 'type2' means to apply this policy to only type2 OSPF external routes. 'internal' means 'match ospf specfic routes'. 'any' means apply this policy to all OSPF external routes.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2), external(3), internal(4), any(5)  

rcIpPolicyRipAnnounceRipMetric 1.3.6.1.4.1.2272.1.8.11.8.1.15
RIP metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. If set to zero, the routing table metric calculated for RIP is is used.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

rcIpPolicyRipAnnounceRowStatus 1.3.6.1.4.1.2272.1.8.11.8.1.16
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyOspfAnnounceTableSize 1.3.6.1.4.1.2272.1.8.11.9
Used to indicate the number of entries in the rcIpPolicyOspfAnnounceTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyOspfAnnounceTable 1.3.6.1.4.1.2272.1.8.11.10
A table used to store set of announce policies configured for OSPF routing protocol. The Number of entries is given by rcIpPolicyNumOspfPolicies.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyOspfAnnounceEntry

rcIpPolicyOspfAnnounceEntry 1.3.6.1.4.1.2272.1.8.11.10.1
Entry containing configuration information for a particular announce policy.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyOspfAnnounceEntry  

rcIpPolicyOspfAnnounceId 1.3.6.1.4.1.2272.1.8.11.10.1.1
A value that uniquely identifies the policy associated with this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 2001..3000  

rcIpPolicyOspfAnnounceName 1.3.6.1.4.1.2272.1.8.11.10.1.2
An administratively-assigned name for this policy.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

rcIpPolicyOspfAnnounceEnable 1.3.6.1.4.1.2272.1.8.11.10.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPolicyOspfAnnounceExactNetListId 1.3.6.1.4.1.2272.1.8.11.10.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular announce policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'. If set to '0', this policy applies to all the routes.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceRangeNetListId 1.3.6.1.4.1.2272.1.8.11.10.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. If set to '0', this policy applies to all the routes.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceRipGatewayListId 1.3.6.1.4.1.2272.1.8.11.10.1.6
Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-routers (other side of the interface) addresses that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates received from any rip routers/interfaces.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceRipInterfaceListId 1.3.6.1.4.1.2272.1.8.11.10.1.7
Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-interface addresses on this router. If an interface address is incuded in this list, this policy applies to RIP advertisements received on that interface. A value of '0' indicates thtat this policy applies to RIP updates received on any rip-interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnouncePrecedence 1.3.6.1.4.1.2272.1.8.11.10.1.8
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyOspfAnnounceRouteSource 1.3.6.1.4.1.2272.1.8.11.10.1.9
Is represented as bit map to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will match the policy.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(4), any(7)  

rcIpPolicyOspfAnnounceAdvertiseNetListId 1.3.6.1.4.1.2272.1.8.11.10.1.10
Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks that differ from actual network in the routing table. Also allows advertisement of an aggregate or default along with the actual network. Aggregation is useful if a number of routes in the table falls in a certain range. Can save space by sending aggregate route instead of the individual routes. Actual network/route is included in the update only if there is a match or there there is an entry (address & mask pair) 255.255.255.255/255.255.255.255 in the list.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceAction 1.3.6.1.4.1.2272.1.8.11.10.1.11
It indicates whether the route should be announced or not.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER announce(1), ignore(2)  

rcIpPolicyOspfAnnounceExtMetricType 1.3.6.1.4.1.2272.1.8.11.10.1.12
Ospf External metric type. It is used to indicate what type of the external metric it is. 'type1' means to the cost is 'internal ospf cost + ExtMetric'. 'type2' means the ospf-metric is equal to 'type2'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpPolicyOspfAnnounceExtMetric 1.3.6.1.4.1.2272.1.8.11.10.1.13
OSPF External metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. Value '0' is used to indicate that route's actual cost is used to announce.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyOspfAnnounceRowStatus 1.3.6.1.4.1.2272.1.8.11.10.1.14
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyRipAcceptTableSize 1.3.6.1.4.1.2272.1.8.11.11
Used to indicate the number of entries in the rcIpPolicyRipAcceptTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyRipAcceptTable 1.3.6.1.4.1.2272.1.8.11.12
A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyRipAcceptEntry

rcIpPolicyRipAcceptEntry 1.3.6.1.4.1.2272.1.8.11.12.1
Entry containing configuration information for a particular accept policy.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyRipAcceptEntry  

rcIpPolicyRipAcceptId 1.3.6.1.4.1.2272.1.8.11.12.1.1
A value that uniquely identifies the policy associated with this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 4001..5000  

rcIpPolicyRipAcceptName 1.3.6.1.4.1.2272.1.8.11.12.1.2
An administratively-assigned name for this policy.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

rcIpPolicyRipAcceptEnable 1.3.6.1.4.1.2272.1.8.11.12.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPolicyRipAcceptExactNetListId 1.3.6.1.4.1.2272.1.8.11.12.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular accept policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptRangeNetListId 1.3.6.1.4.1.2272.1.8.11.12.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. A null list means 'match any route'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptRipGatewayListId 1.3.6.1.4.1.2272.1.8.11.12.1.6
Used to identify the RIP-gatewayList in the PolicyListTable that iares associated with this policy. The list contains the addresses of one or more routers that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates from any router.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptRipInterfaceListId 1.3.6.1.4.1.2272.1.8.11.12.1.7
Used to indicate ListId defined for RipInterfaceList in the rcIpPolicyListTable that is assiciated with this policy. The list contains the addresses of one or more interfaces on this router. If an interface address is included in the list, this policy applies to RIP advertisements received on that interface. If set to '0', this policy applies to RIP updates received on any interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptPrecedence 1.3.6.1.4.1.2272.1.8.11.12.1.8
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyRipAcceptAction 1.3.6.1.4.1.2272.1.8.11.12.1.9
It indicates whether the route should be acceptd or not.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), ignore(2)  

rcIpPolicyRipAcceptInjectNetListId 1.3.6.1.4.1.2272.1.8.11.12.1.10
Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that differ from the actual advertised network. For instance, if a number of networks in a certain range are learned and an aggregate advertisement could be inserted instead of the individual networks. Upon receiving a route that matches this policy, all networks in this list will be considered for inclusion in the routing table. If the list is empty or if the value of the ListId is '0' then the actual received network is considered. An encoding of 255.255.255.255/255.255.255.255 means 'match the actual received network.'. This allows insertion of an aggregate or default along with the actual netowrk.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptApplyMask 1.3.6.1.4.1.2272.1.8.11.12.1.11
If the 'action' is set to 'accept' and the actual received network will be considered, this is an optional IP address mask that will be applied to the network number from the RIP update. This is used to override the interface's subnet mask in the presence of networks with variable length subnet masks.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

rcIpPolicyRipAcceptRowStatus 1.3.6.1.4.1.2272.1.8.11.12.1.12
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyOspfAcceptTableSize 1.3.6.1.4.1.2272.1.8.11.13
Used to indicate the number of entries in the rcIpPolicyOspfAcceptTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyOspfAcceptTable 1.3.6.1.4.1.2272.1.8.11.14
A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyOspfAcceptEntry

rcIpPolicyOspfAcceptEntry 1.3.6.1.4.1.2272.1.8.11.14.1
Entry containing configuration information for a particular accept policy.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyOspfAcceptEntry  

rcIpPolicyOspfAcceptId 1.3.6.1.4.1.2272.1.8.11.14.1.1
A value that uniquely identifies the policy associated with this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 6001..7000  

rcIpPolicyOspfAcceptName 1.3.6.1.4.1.2272.1.8.11.14.1.2
An administratively-assigned name for this policy.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

rcIpPolicyOspfAcceptEnable 1.3.6.1.4.1.2272.1.8.11.14.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpPolicyOspfAcceptExactNetListId 1.3.6.1.4.1.2272.1.8.11.14.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular accept policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAcceptRangeNetListId 1.3.6.1.4.1.2272.1.8.11.14.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. A null list means 'match any route'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAcceptPrecedence 1.3.6.1.4.1.2272.1.8.11.14.1.6
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyOspfAcceptAction 1.3.6.1.4.1.2272.1.8.11.14.1.7
It indicates whether the route should be acceptd or not.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), ignore(2)  

rcIpPolicyOspfAcceptInjectNetListId 1.3.6.1.4.1.2272.1.8.11.14.1.8
Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that differ from the actual advertised network. For instance, if a number of networks in a certain range are learned and an aggregate advertisement could be inserted instead of the individual networks. Upon receiving a route that matches this policy, all networks in this list will be considered for inclusion in the routing table. If the list is empty or if the value of the ListId is '0' then the actual received network is considered. An encoding of 255.255.255.255/255.255.255.255 means 'match the actual received network.'. This allows insertion of an aggregate or default along with the actual netowrk.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAcceptExtType 1.3.6.1.4.1.2272.1.8.11.14.1.9
Used to indicate the ospf external type. This parameter describes which types of OSPF ASE routes match this policy. 'any' means 'match either ASE type 1 or 2'. 'type1' means 'match any external type 1'. 'type2' means 'match any external type 2
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2), any(3)  

rcIpPolicyOspfAcceptRowStatus 1.3.6.1.4.1.2272.1.8.11.14.1.10
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPolicyNetListTableSize 1.3.6.1.4.1.2272.1.8.11.15
Used to indicate the number of entries in the rcIpPolicyNetListTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPolicyNetListTable 1.3.6.1.4.1.2272.1.8.11.16
A table used to group rcIpPolicyAddrEntry(s) into a list.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyNetListEntry

rcIpPolicyNetListEntry 1.3.6.1.4.1.2272.1.8.11.16.1
Route entry attributes.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcIpPolicyNetListEntry  

rcIpPolicyNetListId 1.3.6.1.4.1.2272.1.8.11.16.1.1
A value that uniquely identifies this list of rcIpPolicyNetListEntry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpPolicyNetListName 1.3.6.1.4.1.2272.1.8.11.16.1.3
An administratively-assigned name for this list.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

rcIpPolicyNetListIdListSize 1.3.6.1.4.1.2272.1.8.11.16.1.4
Used to indicate the number of rcIpPolicyNetEntry id(s) in the rcIpPolicyNetListIdList variable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyNetListIdList 1.3.6.1.4.1.2272.1.8.11.16.1.5
Used to indicate zero or more NetListId that are associated to this list. Each NetList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcIpPolicyNetListPolicyIdListSize 1.3.6.1.4.1.2272.1.8.11.16.1.6
Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyNetListPolicyIdList 1.3.6.1.4.1.2272.1.8.11.16.1.7
Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

rcIpPolicyNetListRowStatus 1.3.6.1.4.1.2272.1.8.11.16.1.8
Row status of this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpAsPathAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.1
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpAsPathAccessListTable 1.3.6.1.4.1.2272.1.8.100.2
IP As Path Access List table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpAsPathAccessListEntry

rcIpAsPathAccessListEntry 1.3.6.1.4.1.2272.1.8.100.2.1
An entry of Ip As Path Access List Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpAsPathAccessListEntry  

rcIpAsPathAccessListId 1.3.6.1.4.1.2272.1.8.100.2.1.1
Path Access List entry Id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

rcIpAsPathAccessListMemberId 1.3.6.1.4.1.2272.1.8.100.2.1.2
frq. at which hello sent.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpAsPathAccessListMode 1.3.6.1.4.1.2272.1.8.100.2.1.3
Path Access List Mode, permit or deny.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpAsPathAccessListAsRegularExpression 1.3.6.1.4.1.2272.1.8.100.2.1.4
IP Path Access List Regular Expression
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

rcIpAsPathAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.2.1.5
Table row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpCommunityAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.3
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpCommunityAccessListTable 1.3.6.1.4.1.2272.1.8.100.4
IP CommunityAccess List table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpCommunityAccessListEntry

rcIpCommunityAccessListEntry 1.3.6.1.4.1.2272.1.8.100.4.1
An entry of Ip CommunityAccess List Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpCommunityAccessListEntry  

rcIpCommunityAccessListId 1.3.6.1.4.1.2272.1.8.100.4.1.1
IP CommunityAccess entry List Id
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

rcIpCommunityAccessListMemberId 1.3.6.1.4.1.2272.1.8.100.4.1.2
frq. at which hello sent.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpCommunityAccessListMode 1.3.6.1.4.1.2272.1.8.100.4.1.3
IP Community Access List Mode, permit or deny.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpCommunityAccessListCommunity 1.3.6.1.4.1.2272.1.8.100.4.1.4
IP Community Access List Community string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

rcIpCommunityAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.4.1.5
IP Community Access Table Row Status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.5
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpAccessListTable 1.3.6.1.4.1.2272.1.8.100.6
IP Access List table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpAccessListEntry

rcIpAccessListEntry 1.3.6.1.4.1.2272.1.8.100.6.1
An entry of Ip Access List Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpAccessListEntry  

rcIpAccessListId 1.3.6.1.4.1.2272.1.8.100.6.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..99  

rcIpAccessListMode 1.3.6.1.4.1.2272.1.8.100.6.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpAccessListNetwork 1.3.6.1.4.1.2272.1.8.100.6.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcIpAccessListNetworkMask 1.3.6.1.4.1.2272.1.8.100.6.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcIpAccessListName 1.3.6.1.4.1.2272.1.8.100.6.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.6.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpExtendedAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.7
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpExtendedAccessListTable 1.3.6.1.4.1.2272.1.8.100.8
IP Extended Access List table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpExtendedAccessListEntry

rcIpExtendedAccessListEntry 1.3.6.1.4.1.2272.1.8.100.8.1
An entry of Ip Extended Access List Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpExtendedAccessListEntry  

rcIpExtendedAccessListId 1.3.6.1.4.1.2272.1.8.100.8.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 100..199  

rcIpExtendedAccessListMode 1.3.6.1.4.1.2272.1.8.100.8.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpExtendedAccessListNetwork 1.3.6.1.4.1.2272.1.8.100.8.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListNetworkWildCard 1.3.6.1.4.1.2272.1.8.100.8.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListNetworkMask 1.3.6.1.4.1.2272.1.8.100.8.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListNetworkMaskWildCard 1.3.6.1.4.1.2272.1.8.100.8.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListName 1.3.6.1.4.1.2272.1.8.100.8.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpExtendedAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.8.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpPrefixListTableSize 1.3.6.1.4.1.2272.1.8.100.9
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpPrefixListTable 1.3.6.1.4.1.2272.1.8.100.10
IP Prefix List table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPrefixListEntry

rcIpPrefixListEntry 1.3.6.1.4.1.2272.1.8.100.10.1
An entry of Ip Prefix List Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpPrefixListEntry  

rcIpPrefixListId 1.3.6.1.4.1.2272.1.8.100.10.1.1
ListId
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcIpPrefixListPrefix 1.3.6.1.4.1.2272.1.8.100.10.1.2
Is a member of a specific prefix list. Adding the prefix to the given prefix list
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpPrefixListPrefixMaskLen 1.3.6.1.4.1.2272.1.8.100.10.1.3
prefix mask length
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

rcIpPrefixListMaskLenFrom 1.3.6.1.4.1.2272.1.8.100.10.1.4
used with mask len
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

rcIpPrefixListMaskLenUpto 1.3.6.1.4.1.2272.1.8.100.10.1.5
used with mask len
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

rcIpPrefixListName 1.3.6.1.4.1.2272.1.8.100.10.1.6
list name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

rcIpPrefixListRowStatus 1.3.6.1.4.1.2272.1.8.100.10.1.7
row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpRoutePolicyTableSize 1.3.6.1.4.1.2272.1.8.100.11
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpRoutePolicyApply 1.3.6.1.4.1.2272.1.8.100.12
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpRoutePolicyTable 1.3.6.1.4.1.2272.1.8.100.13
IP Route Map table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRoutePolicyEntry

rcIpRoutePolicyEntry 1.3.6.1.4.1.2272.1.8.100.13.1
An entry of Ip Route Map Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpRoutePolicyEntry  

rcIpRoutePolicyId 1.3.6.1.4.1.2272.1.8.100.13.1.1
Index used to identify a group of policies in the route policy tableRoute map id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcIpRoutePolicySequenceNumber 1.3.6.1.4.1.2272.1.8.100.13.1.2
second index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET parameters and an action.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

rcIpRoutePolicyName 1.3.6.1.4.1.2272.1.8.100.13.1.3
Is used to group a set of policies with different sequence number. Id & Name have one-on-one relationship. Different policy groups can contain same sequence number, whereas with in a group the sequence number must be different.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

rcIpRoutePolicyEnable 1.3.6.1.4.1.2272.1.8.100.13.1.4
Value specified here indicate whether this policy is enabled or not. If disabled policy sould not be used.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpRoutePolicyMode 1.3.6.1.4.1.2272.1.8.100.13.1.5
specifies the action to be taken when this policy is selected for a specific route. This can be permit or deny or continue. Permit indicates allow the route, deny indicates ignore the route. Continue means continue checking the next match criteria set in the next policy seq, if none take the default action in the given context.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpRoutePolicyMatchProtocol 1.3.6.1.4.1.2272.1.8.100.13.1.6
Match protocol. Used for RIP and DVMRP announce policy only. Value is one of multiple (logical 'OR) of the following values: direct(1): enables direct match-protocol static(2): enables static match-protocol rip(4): enables rip match-protocol ospf(8): enables ospf match-protocol ebgp(16): enables ebgp match-protocol dvmrp(32): enables dvmrp match-protocol ibgp(64): enables ibgp match-protocol isis(128): enables isis match-protocol any(255): enables all match-protocols
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcIpRoutePolicyMatchAsPath 1.3.6.1.4.1.2272.1.8.100.13.1.7
Applicable to BGP protocol only. Match the BGP autonomous system path. This will override the BGP neighbor filter list info.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchCommunity 1.3.6.1.4.1.2272.1.8.100.13.1.8
Applicable to BGP protocol only. Filter incoming/outgoing updates based on communities.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchCommunityExact 1.3.6.1.4.1.2272.1.8.100.13.1.9
If enabled indicates the match has be an exact (i.e., all of the communities specified in the path has to be matched).
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcIpRoutePolicyMatchNetwork 1.3.6.1.4.1.2272.1.8.100.13.1.10
can specify one or more prefix list name or id(s)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchIpRouteSource 1.3.6.1.4.1.2272.1.8.100.13.1.11
In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name(s) or id(s) seperated by comma.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchNextHop 1.3.6.1.4.1.2272.1.8.100.13.1.12
In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name(s) or id(s) seperated by comma.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchInterface 1.3.6.1.4.1.2272.1.8.100.13.1.13
Match received interface. Only for rip routes. Ignored in all other cases.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchRouteType 1.3.6.1.4.1.2272.1.8.100.13.1.14
For BGP this choice refers to locally generated routes external routes learned via ebgp nbr. For OSPF internal refers to intra and inter area routes (belongs to local autonomous system). External (type1|type2) refers to the routes learned from other ASs and imported as either type1 or type2. if type1/type2 is specified then match only type1/type2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), local(1), internal(2), external(3), externaltype1(4), externaltype2(5)  

rcIpRoutePolicyMatchMetric 1.3.6.1.4.1.2272.1.8.100.13.1.15
Match mec field in the incoming advertisement.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpRoutePolicyMatchTag 1.3.6.1.4.1.2272.1.8.100.13.1.16
specifies a list of tag(s), that will be used during the match criteria process.contains one or more tag values..
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicySetRoutePreference 1.3.6.1.4.1.2272.1.8.100.13.1.17
if non-zero specifies the route preference value to be assigned to the routes that applies this policy.contains one or more tag values..
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcIpRoutePolicySetAsPath 1.3.6.1.4.1.2272.1.8.100.13.1.18
The AS path vaule to be used whether the SetAsPathMode is Tag or Prepend.as-path string..
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicySetAsPathMode 1.3.6.1.4.1.2272.1.8.100.13.1.19
It can be either tag or prepend tag. applicable only while redistributing routes to BGP.Converts the tag of a route into AS path.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tag(1), prepend(2)  

rcIpRoutePolicySetAutomaticTag 1.3.6.1.4.1.2272.1.8.100.13.1.20
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcIpRoutePolicySetCommunityNumber 1.3.6.1.4.1.2272.1.8.100.13.1.21
this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicySetCommunityMode 1.3.6.1.4.1.2272.1.8.100.13.1.22
this value can be either append or none unchanged - keep the community attribute in the route path as it is. none - remove the community in the route path additive - adds the community-number specified in SetCommunityNumber to the community list attribute. Applicable to BGP advertisments.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unchanged(0), none(1), append(2)  

rcIpRoutePolicySetMetricTypeInternal 1.3.6.1.4.1.2272.1.8.100.13.1.23
Indicates to set the MED value for routes advertised to ebgp nbrs to the IGP metric value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRoutePolicySetMetric 1.3.6.1.4.1.2272.1.8.100.13.1.24
Value of the metric to be used while sending an update for the routes that match the matching criteria in this route policy. Default - 0 indicates the internal value defined for protocol
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpRoutePolicySetMetricType 1.3.6.1.4.1.2272.1.8.100.13.1.25
Metric type for the routes to be imported into OSPF routing protocol, which passed the matching criteria configured in this route policy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRoutePolicySetNextHop 1.3.6.1.4.1.2272.1.8.100.13.1.26
IpAddress of the next hop router. Ignored for DVMRP routes.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcIpRoutePolicySetOrigin 1.3.6.1.4.1.2272.1.8.100.13.1.27
igp/egp/incomplete Applicable to BGP protocol only. If not set uses the route origin from the Ip routing table (protocol).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unchanged(0), igp(1), egp(2), incomplete(3)  

rcIpRoutePolicySetLocalPref 1.3.6.1.4.1.2272.1.8.100.13.1.28
this value will be used during route decision process in the BGP protocol. Applicable to BGP only.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRoutePolicySetOriginEgpAs 1.3.6.1.4.1.2272.1.8.100.13.1.29
indicates the Remote autonomous sys number. Applicable to BGP only.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRoutePolicySetTag 1.3.6.1.4.1.2272.1.8.100.13.1.30
Value to be used for setting tag of the destination routing protocol. If not specified forward the tag value in the source routing protocol. Value 0 indicates not set
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRoutePolicySetWeight 1.3.6.1.4.1.2272.1.8.100.13.1.31
Should be using with match as-path condition. Weight value for the routing table. For BGP this value will override the weight configured through NetworkTableEntry or FilterListWeight or NeighborWeight. Used for BGP only.Value 0 indicates not set
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRoutePolicySetInjectNetList 1.3.6.1.4.1.2272.1.8.100.13.1.32
specifies the prefix list to be used either for injecting the routes into the routing table or to include the networks in the advertisement. Ignored for DVMRP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyRowStatus 1.3.6.1.4.1.2272.1.8.100.13.1.33
row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpRoutePolicySetMask 1.3.6.1.4.1.2272.1.8.100.13.1.34
Set Mask Ip Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rcIpRoutePolicyNssaPbit 1.3.6.1.4.1.2272.1.8.100.13.1.35
Set/Reset P bit in specified type 7 LSA. By default P bit is always set in case user set it to disable state for particular route policy than all type 7 LSAs associated with that route policy will have P bit cleared, with this intact NSSA ABR will not perform translation of these LSAs to type 5.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcIpRedistributeTableSize 1.3.6.1.4.1.2272.1.8.100.14
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpRedistributeApply 1.3.6.1.4.1.2272.1.8.100.15
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpRedistributeTable 1.3.6.1.4.1.2272.1.8.100.16
IP Redistribute table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRedistributeEntry

rcIpRedistributeEntry 1.3.6.1.4.1.2272.1.8.100.16.1
An entry of Ip Redistribute Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpRedistributeEntry  

rcIpRedistributeProtocol 1.3.6.1.4.1.2272.1.8.100.16.1.1
Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ospf(1), bgp(2), isis(3), ospfv3(4)  

rcIpRedistributeRouteSource 1.3.6.1.4.1.2272.1.8.100.16.1.2
equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this source.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(3), ospf(4), bgp(5), isis(6)  

rcIpRedistributeEnable 1.3.6.1.4.1.2272.1.8.100.16.1.3
Enable/Disable. By default this is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcIpRedistributeMetric 1.3.6.1.4.1.2272.1.8.100.16.1.4
Value of the metric to be announced in the advertisement. The range specified for ISIS is for other protocols that range between (0 .. 65535)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

rcIpRedistributeMetricType 1.3.6.1.4.1.2272.1.8.100.16.1.5
specifies the type of the metric type, useful for ISIS, OSPF and BGP only. In case of ISIS type1 is treated as internal and type2 is treated as external.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRedistributeMatchRouteType 1.3.6.1.4.1.2272.1.8.100.16.1.6
used to filter a route based on the route type. applicable to BGP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external1(2), external2(3)  

rcIpRedistributeSetTag 1.3.6.1.4.1.2272.1.8.100.16.1.7
Tag value to be set in the advertisment.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRedistributeSubnets 1.3.6.1.4.1.2272.1.8.100.16.1.8
applicable to OSPF only. Indicates that all the subnets need to be advertised individually.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), supress(2)  

rcIpRedistributeRoutePolicy 1.3.6.1.4.1.2272.1.8.100.16.1.9
specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.Route map name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpRedistributeASNumber 1.3.6.1.4.1.2272.1.8.100.16.1.10
Autonomous system number. Used only for the BGP protocol.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRedistributeWeight 1.3.6.1.4.1.2272.1.8.100.16.1.11
used only for the BGP protocol.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRedistributeDefaultOriginate 1.3.6.1.4.1.2272.1.8.100.16.1.12
indicates the given protocol will originate/advertise a default route.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcIpRedistributeRowStatus 1.3.6.1.4.1.2272.1.8.100.16.1.13
row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpRedistributeLevel 1.3.6.1.4.1.2272.1.8.100.16.1.14
This is for ISIS. This sets the redistribute level only. Set this to level2 to distribute the routes in L2 LSPs. If the router is at level1 then setting redistribute at level2 does not have any significance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level2(2)  

rcIpOspfInFilterTableSize 1.3.6.1.4.1.2272.1.8.100.17
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpOspfInFilterApply 1.3.6.1.4.1.2272.1.8.100.18
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcIpOspfInFilterTable 1.3.6.1.4.1.2272.1.8.100.19
IP Ospf In Filter table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpOspfInFilterEntry

rcIpOspfInFilterEntry 1.3.6.1.4.1.2272.1.8.100.19.1
An entry of Ip Ospf In Filter Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpOspfInFilterEntry  

rcIpOspfInFilterAdvertisingRtr 1.3.6.1.4.1.2272.1.8.100.19.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rcIpOspfInFilterEnable 1.3.6.1.4.1.2272.1.8.100.19.1.2
IfIndex
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcIpOspfInFilterMetricType 1.3.6.1.4.1.2272.1.8.100.19.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2), any(3)  

rcIpOspfInFilterPolicyName 1.3.6.1.4.1.2272.1.8.100.19.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rcIpOspfInFilterRowStatus 1.3.6.1.4.1.2272.1.8.100.19.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcIpRoutePrefTableSize 1.3.6.1.4.1.2272.1.8.100.20
table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcIpRoutePrefTable 1.3.6.1.4.1.2272.1.8.100.21
IP Route Pref table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRoutePrefEntry

rcIpRoutePrefEntry 1.3.6.1.4.1.2272.1.8.100.21.1
An entry of Ip Route Pref Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcIpRoutePrefEntry  

rcIpRoutePrefProtocol 1.3.6.1.4.1.2272.1.8.100.21.1.1
Protocol
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), static(2), mpls(3), ospfIntra(4), ospfInter(5), isisLevel1(6), isisLevel2(7), ebgp(8), rip(9), ospfExternal1(10), ospfExternal2(11), ibgp(12), staticv6(13), ospfv3Intra(14), ospfv3Inter(15), ospfv3External1(16), ospfv3External2(17)  

rcIpRoutePrefDefault 1.3.6.1.4.1.2272.1.8.100.21.1.2
Shows the default preference value for the given protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

rcIpRoutePrefConfigured 1.3.6.1.4.1.2272.1.8.100.21.1.3
This value is configurable by the user
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255