RBTWS-PORT-MIB

File: RBTWS-PORT-MIB.mib (6024 bytes)

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
RBTWS-ROOT-MIB

Imported symbols

MODULE-COMPLIANCE	OBJECT-GROUP	MODULE-IDENTITY
OBJECT-TYPE	Unsigned32	TEXTUAL-CONVENTION
rbtwsMibs

Defined Types

RbtwsPhysPortNumber
Physical port number
TEXTUAL-CONVENTION
	Unsigned32	1..1024

RbtwsPortMode
Enumeration for the port mode (administratively controlled).
TEXTUAL-CONVENTION
	INTEGER	directAttachAP(1), networkPort(2), wired(3)

RbtwsPortPoeMode
Enumeration for the port PoE supply configuration: the availability of Power over Ethernet is administratively controlled, can be enabled or disabled. Some ports may not have the Power over Ethernet hardware: they should always appear as disabled.
TEXTUAL-CONVENTION
	INTEGER	poeEnable(1), poeDisable(2)

RbtwsPortConfigEntry
SEQUENCE
	rbtwsPortConfigPortNumber	RbtwsPhysPortNumber
	rbtwsPortConfigPortMode	RbtwsPortMode
	rbtwsPortConfigPoeMode	RbtwsPortPoeMode
	rbtwsPortConfigTrunkMaster	RbtwsPhysPortNumber

Defined Values

rbtwsPortMib		1.3.6.1.4.1.52.4.15.1.4.6
Port information MIB. Copyright 2008 Enterasys Networks, Inc. All rights reserved. This SNMP Management Information Base Specification (Specification) embodies confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Enterasys Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY

rbtwsPortObjects		1.3.6.1.4.1.52.4.15.1.4.6.1
OBJECT IDENTIFIER

rbtwsPortDataObjects		1.3.6.1.4.1.52.4.15.1.4.6.1.1
OBJECT IDENTIFIER

rbtwsPortConfigTable		1.3.6.1.4.1.52.4.15.1.4.6.1.1.1
Port configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RbtwsPortConfigEntry

rbtwsPortConfigEntry		1.3.6.1.4.1.52.4.15.1.4.6.1.1.1.1
Port configuration entry
Status: current	Access: not-accessible
OBJECT-TYPE
	RbtwsPortConfigEntry

rbtwsPortConfigPortNumber		1.3.6.1.4.1.52.4.15.1.4.6.1.1.1.1.1
Physical Port Number
Status: current	Access: not-accessible
OBJECT-TYPE
	RbtwsPhysPortNumber

rbtwsPortConfigPortMode		1.3.6.1.4.1.52.4.15.1.4.6.1.1.1.1.2
Indicates whether this port is configured for directly attached AP, as network port, or for wired auth.
Status: current	Access: read-only
OBJECT-TYPE
	RbtwsPortMode

rbtwsPortConfigPoeMode		1.3.6.1.4.1.52.4.15.1.4.6.1.1.1.1.3
Indicates whether this port is configured to supply PoE (Power over Ethernet).
Status: current	Access: read-only
OBJECT-TYPE
	RbtwsPortPoeMode

rbtwsPortConfigTrunkMaster		1.3.6.1.4.1.52.4.15.1.4.6.1.1.1.1.4
The master port of the group this port belongs to (identified by the physical port number). A zero value means information is not available (usually if this port is not part of any port group).
Status: current	Access: read-only
OBJECT-TYPE
	RbtwsPhysPortNumber

rbtwsPortConformance		1.3.6.1.4.1.52.4.15.1.4.6.1.2
OBJECT IDENTIFIER

rbtwsPortCompliances		1.3.6.1.4.1.52.4.15.1.4.6.1.2.1
OBJECT IDENTIFIER

rbtwsPortGroups		1.3.6.1.4.1.52.4.15.1.4.6.1.2.2
OBJECT IDENTIFIER

rbtwsPortCompliance		1.3.6.1.4.1.52.4.15.1.4.6.1.2.1.1
The compliance statement for devices that implement the Port MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

rbtwsPortConfigGroup		1.3.6.1.4.1.52.4.15.1.4.6.1.2.2.1
Mandatory group of objects implemented to provide Port configuration info.
Status: current	Access: read-only
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor