RBRIDGE-MIB

File: RBRIDGE-MIB.mib (69344 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
Q-BRIDGE-MIB INET-ADDRESS-MIB BRIDGE-MIB
IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Counter64 Unsigned32
mib-2 TEXTUAL-CONVENTION TruthValue
MacAddress RowStatus MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP VlanId
PortList InetAddress InetAddressType
BridgeId InterfaceIndex

Defined Types

RbridgeAddress  
The Media Access Control (MAC) address used by an RBridge port. This may match the RBridge IS-IS SystemID.
TEXTUAL-CONVENTION    
  OCTET STRING Size(6)  

RbridgeNickname  
The 16-bit identifier used in TRILL as an abbreviation for the RBridge's 48-bit IS-IS System ID. The value 0 means a nickname is not specified, the values 0xFFC0 through 0xFFFE are reserved for future allocation, and the value 0xFFFF is permanently reserved.
TEXTUAL-CONVENTION    
  Unsigned32 0..65471  

RbridgeBaseNicknameEntry  
SEQUENCE    
  rbridgeBaseNicknameName RbridgeNickname
  rbridgeBaseNicknamePriority Unsigned32
  rbridgeBaseNicknameDtrPriority Unsigned32
  rbridgeBaseNicknameType INTEGER
  rbridgeBaseNicknameRowStatus RowStatus

RbridgeBasePortEntry  
SEQUENCE    
  rbridgeBasePort Unsigned32
  rbridgeBasePortIfIndex InterfaceIndex
  rbridgeBasePortDisable TruthValue
  rbridgeBasePortTrunkPort TruthValue
  rbridgeBasePortAccessPort TruthValue
  rbridgeBasePortP2pHellos TruthValue
  rbridgeBasePortState INTEGER
  rbridgeBasePortInhibitionTime Unsigned32
  rbridgeBasePortDisableLearning TruthValue
  rbridgeBasePortDesiredDesigVlan VlanId
  rbridgeBasePortDesigVlan VlanId
  rbridgeBasePortStpRoot BridgeId
  rbridgeBasePortStpRootChanges Counter32
  rbridgeBasePortStpWiringCloset BridgeId

RbridgeUniFdbEntry  
SEQUENCE    
  rbridgeFdbId Unsigned32
  rbridgeUniFdbAddr MacAddress
  rbridgeUniFdbPort Unsigned32
  rbridgeUniFdbNickname RbridgeNickname
  rbridgeUniFdbConfidence Unsigned32
  rbridgeUniFdbStatus INTEGER

RbridgeUniFibEntry  
SEQUENCE    
  rbridgeUniFibNickname RbridgeNickname
  rbridgeUniFibPort Unsigned32
  rbridgeUniFibNextHop RbridgeNickname
  rbridgeUniFibHopCount Unsigned32

RbridgeMultiFibEntry  
SEQUENCE    
  rbridgeMultiFibNickname RbridgeNickname
  rbridgeMultiFibPorts PortList

RbridgeVlanEntry  
SEQUENCE    
  rbridgeVlanIndex Unsigned32
  rbridgeVlanForwarderLosts Counter32
  rbridgeVlanDisableLearning TruthValue
  rbridgeVlanSnooping INTEGER

RbridgeVlanPortEntry  
SEQUENCE    
  rbridgeVlanPortInhibited TruthValue
  rbridgeVlanPortForwarder TruthValue
  rbridgeVlanPortAnnouncing TruthValue
  rbridgeVlanPortDetectedVlanMapping TruthValue

RbridgePortCounterEntry  
SEQUENCE    
  rbridgePortRpfCheckFails Counter32
  rbridgePortHopCountExceeds Counter32
  rbridgePortOptionDrops Counter32
  rbridgePortTrillInFrames Counter64
  rbridgePortTrillOutFrames Counter64

RbridgeEsadiEntry  
SEQUENCE    
  rbridgeEsadiEnable TruthValue
  rbridgeEsadiConfidence Unsigned32
  rbridgeEsadiDrbPriority Unsigned32
  rbridgeEsadiDrb RbridgeAddress
  rbridgeEsadiDrbHoldingTime Unsigned32
  rbridgeEsadiRowStatus RowStatus

RbridgeSnoopingPortEntry  
SEQUENCE    
  rbridgeSnoopingPortAddrType INTEGER

RbridgeSnoopingAddrEntry  
SEQUENCE    
  rbridgeSnoopingAddrType InetAddressType
  rbridgeSnoopingAddr InetAddress
  rbridgeSnoopingAddrPorts PortList

RbridgeDtreeEntry  
SEQUENCE    
  rbridgeDtreeNumber Unsigned32
  rbridgeDtreeNickname RbridgeNickname
  rbridgeDtreeIngress TruthValue

RbridgeTrillNbrEntry  
SEQUENCE    
  rbridgeTrillNbrMacAddr MacAddress
  rbridgeTrillNbrMtu Unsigned32
  rbridgeTrillNbrFailedMtuTest TruthValue

Defined Values

rbridgeMIB 5.1.214
The RBridge MIB module for managing switches that support the TRILL protocol.
MODULE-IDENTITY    

rbridgeNotifications 5.1.214.0
OBJECT IDENTIFIER    

rbridgeObjects 5.1.214.1
OBJECT IDENTIFIER    

rbridgeConformance 5.1.214.2
OBJECT IDENTIFIER    

rbridgeBase 5.1.214.1.1
OBJECT IDENTIFIER    

rbridgeFdb 5.1.214.1.2
OBJECT IDENTIFIER    

rbridgeVlan 5.1.214.1.3
OBJECT IDENTIFIER    

rbridgeEsadi 5.1.214.1.4
OBJECT IDENTIFIER    

rbridgeCounter 5.1.214.1.5
OBJECT IDENTIFIER    

rbridgeSnooping 5.1.214.1.6
OBJECT IDENTIFIER    

rbridgeDtree 5.1.214.1.7
OBJECT IDENTIFIER    

rbridgeTrill 5.1.214.1.8
OBJECT IDENTIFIER    

rbridgeBaseTrillVersion 5.1.214.1.1.1
The maximum TRILL version number that this RBridge supports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeBaseNumPorts 5.1.214.1.1.2
The number of ports controlled by this RBridge.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeBaseForwardDelay 5.1.214.1.1.3
Modified aging time for address entries after an appointed forwarder change. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 4..30  

rbridgeBaseUniMultipathEnable 5.1.214.1.1.4
The enabled status of unicast TRILL multipathing. It is enabled when true. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBaseMultiMultipathEnable 5.1.214.1.1.5
The enabled status of multi-destination TRILL multipathing. It is enabled when true. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBaseAcceptEncapNonadj 5.1.214.1.1.6
Accept TRILL-encapsulated frames from a neighbor with which this RBridge does not have an IS-IS adjacency, when the value of this object is 'true'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBaseNicknameNumber 5.1.214.1.1.7
The number of nicknames this RBridge should acquire. These can be acquired dynamically or configured statically. This value represents the maximum number of entries in rbridgeBaseNicknameTable. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

rbridgeBaseNicknameTable 5.1.214.1.1.8
A table that contains information about nicknames configured by an operator or learned dynamically by this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeBaseNicknameEntry

rbridgeBaseNicknameEntry 5.1.214.1.1.8.1
A list of information for each nickname of the RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeBaseNicknameEntry  

rbridgeBaseNicknameName 5.1.214.1.1.8.1.1
Nicknames are 16-bit quantities that act as abbreviations for RBridge's 48-bit IS-IS System ID to achieve a more compact encoding.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeNickname  

rbridgeBaseNicknamePriority 5.1.214.1.1.8.1.2
This RBridge's priority to hold this nickname. When the nickname is configured, the default value of this object is 192. When the nickname is configured, the most significant bit (0x80) must be set and the bottom 7 bits have the default value of 0x40, so 0x80 + 0x40 == 0xC0, which is 192 decimal. Additionally, the bottom 7 bits could be configured to a value other than 0x40. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

rbridgeBaseNicknameDtrPriority 5.1.214.1.1.8.1.3
The distribution tree root priority for this nickname. The default value of this object is 32768. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

rbridgeBaseNicknameType 5.1.214.1.1.8.1.4
This object indicates the status of the entry. The default value is static(1). static(1) - this entry has been configured and will remain after the next reset of the RBridge. dynamic(2) - this entry has been acquired by the RBridge nickname acquisition protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

rbridgeBaseNicknameRowStatus 5.1.214.1.1.8.1.5
This object indicates the status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rbridgeBasePortTable 5.1.214.1.1.9
A table that contains generic information about every port that is associated with this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeBasePortEntry

rbridgeBasePortEntry 5.1.214.1.1.9.1
A list of information for each port of the bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeBasePortEntry  

rbridgeBasePort 5.1.214.1.1.9.1.1
The port number of the port for which this entry contains RBridge management information.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

rbridgeBasePortIfIndex 5.1.214.1.1.9.1.2
The value of the instance of the ifIndex object, defined in the IF-MIB, for the interface corresponding to this port. The RBridge port sits on top of this interface.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rbridgeBasePortDisable 5.1.214.1.1.9.1.3
Disable port bit. When this bit is set (true), all frames received or to be transmitted are discarded, with the possible exception of some layer 2 control frames that may be generated and transmitted or received and processed locally. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBasePortTrunkPort 5.1.214.1.1.9.1.4
End-station service disable (trunk port) bit. When this bit is set (true), all native frames received on the port and all native frames that would have been sent on the port are discarded. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBasePortAccessPort 5.1.214.1.1.9.1.5
TRILL traffic disable (access port) bit. If this bit is set, the goal is to avoid sending any TRILL frames, except TRILL-Hello frames, on the port, since it is intended only for native end-station traffic. This ensures that the link is not on the shortest path for any destination. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBasePortP2pHellos 5.1.214.1.1.9.1.6
Use point-to-point (P2P) Hellos bit. If this bit is set, Hellos sent on this port are IS-IS P2P Hellos, not the default TRILL-Hellos. In addition, the IS-IS P2P three-way handshake is used on P2P RBridge links. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBasePortState 5.1.214.1.1.9.1.7
The port's current state. If the entire port is inhibited, its state is portInhibited(2). If specific VLANs are inhibited, the state is vlanInhibited(3), and rbridgeVlanPortTable will tell which VLANs are inhibited. For ports that are disabled (see rbridgeBasePortDisable), this object will have a value of disabled(4). If the RBridge has detected a port that is malfunctioning, it will place that port into the broken(5) state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER uninhibited(1), portInhibited(2), vlanInhibited(3), disabled(4), broken(5)  

rbridgeBasePortInhibitionTime 5.1.214.1.1.9.1.8
Time in seconds that this RBridge will inhibit forwarding on this port after it observes a spanning tree root bridge change on a link or receives conflicting VLAN forwarder information. The default value is 30. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rbridgeBasePortDisableLearning 5.1.214.1.1.9.1.9
Disable learning of MAC addresses seen on this port. To disable learning, the value of this object must be set to 'true'. The default is 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeBasePortDesiredDesigVlan 5.1.214.1.1.9.1.10
The VLAN that a Designated RBridge (DRB) will specify in its TRILL-Hellos as the VLAN to be used by all RBridges on the link for TRILL frames. This VLAN must be enabled on this port. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

rbridgeBasePortDesigVlan 5.1.214.1.1.9.1.11
The VLAN being used on this link for TRILL frames.
Status: current Access: read-only
OBJECT-TYPE    
  VlanId  

rbridgeBasePortStpRoot 5.1.214.1.1.9.1.12
The bridge identifier of the root of the spanning tree, as learned from a Bridge PDU (BPDU) received on this port. For the Multiple Spanning Tree Protocol (MSTP), this is the root bridge of the Common and Internal Spanning Tree (CIST). If no BPDU has been heard, the value returned is a string of zeros.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

rbridgeBasePortStpRootChanges 5.1.214.1.1.9.1.13
The number of times a change in the root bridge is seen from spanning tree BPDUs received on this port, indicating a change in bridged LAN topology. Each such change may cause the port to be inhibited for a period of time. This counter should be synchronized with ifCounterDiscontinuityTime. Discontinuities in the value of this counter can occur at re-initialization of the management system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rbridgeBasePortStpWiringCloset 5.1.214.1.1.9.1.14
The Bridge ID to be used as the spanning tree root in BPDUs sent for the Wiring Closet topology solution described in [RFC6325]. Note that the same value of this object must be set on all RBridge ports participating in this solution. The default value is all 0s. A non-zero value configured into this object indicates that this solution is in use. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  BridgeId  

rbridgeConfidenceNative 5.1.214.1.2.1
The confidence level associated with MAC addresses learned from native frames. This is applicable to all RBridge ports. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

rbridgeConfidenceDecap 5.1.214.1.2.2
The confidence level associated with inner MAC addresses learned after decapsulation of a TRILL data frame. This is applicable to all RBridge ports. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

rbridgeConfidenceStatic 5.1.214.1.2.3
The confidence level associated with MAC addresses that are statically configured. The default value is 255. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

rbridgeUniFdbTable 5.1.214.1.2.4
A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeUniFdbEntry

rbridgeUniFdbEntry 5.1.214.1.2.4.1
Information about a specific unicast MAC address for which the RBridge has some forwarding and/or filtering information.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeUniFdbEntry  

rbridgeFdbId 5.1.214.1.2.4.1.1
The identity of this Filtering Database.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rbridgeUniFdbAddr 5.1.214.1.2.4.1.2
A unicast MAC address for which the device has forwarding information.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rbridgeUniFdbPort 5.1.214.1.2.4.1.3
Either the value '0', or the RBridge port number of the port on which a frame having a source address equal to the value of the corresponding instance of rbridgeUniFdbAddr has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some information about this MAC address. Implementors are encouraged to assign the port value to this object whenever it is available, even for addresses for which the corresponding value of rbridgeUniFdbStatus is not learned(3).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

rbridgeUniFdbNickname 5.1.214.1.2.4.1.4
The RBridge nickname that is placed in the egress nickname field of a TRILL frame sent to this rbridgeFdbAddress in this rbridgeFdbId.
Status: current Access: read-only
OBJECT-TYPE    
  RbridgeNickname  

rbridgeUniFdbConfidence 5.1.214.1.2.4.1.5
The confidence level associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

rbridgeUniFdbStatus 5.1.214.1.2.4.1.6
The status of this entry. The meanings of the values are: other(1) - none of the following. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out) but has not yet been flushed from the table. learned(3) - the information in this entry was learned and is being used. self(4) - the value of the corresponding instance of rbridgeFdbAddress represents one of the device's addresses. The corresponding instance of rbridgeFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of rbridgeFdbAddress was configured by management. esadi(6) - the value of the corresponding instance of rbridgeFdbAddress was learned from ESADI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5), esadi(6)  

rbridgeUniFibTable 5.1.214.1.2.5
A table that contains information about nicknames known by the RBridge. If Equal-Cost Multipath (ECMP) is implemented, there are as many entries for a nickname as there are ECMP paths available for it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeUniFibEntry

rbridgeUniFibEntry 5.1.214.1.2.5.1
A list of information about nicknames known by the RBridge. If ECMP is implemented, there are as many entries as there are ECMP paths available for a given nickname.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeUniFibEntry  

rbridgeUniFibNickname 5.1.214.1.2.5.1.1
An RBridge nickname for which this RBridge has forwarding information.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeNickname  

rbridgeUniFibPort 5.1.214.1.2.5.1.2
The RBridge port number of the port attached to the next-hop RBridge for the path towards the RBridge whose nickname is specified in this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

rbridgeUniFibNextHop 5.1.214.1.2.5.1.3
The nickname of the next-hop RBridge for the path towards the RBridge whose nickname is specified in this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeNickname  

rbridgeUniFibHopCount 5.1.214.1.2.5.1.4
The hop count from this ingress RBridge to the egress RBridge whose nickname is specified in rbridgeUniFibNickname.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeMultiFibTable 5.1.214.1.2.6
A table that contains information about egress nicknames used for multi-destination frame forwarding by this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeMultiFibEntry

rbridgeMultiFibEntry 5.1.214.1.2.6.1
A list of information about egress nicknames used for multi-destination frame forwarding by this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeMultiFibEntry  

rbridgeMultiFibNickname 5.1.214.1.2.6.1.1
The nickname of the multicast distribution tree.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeNickname  

rbridgeMultiFibPorts 5.1.214.1.2.6.1.2
The list of ports to which a frame destined to this multicast distribution tree is flooded. This may be pruned further based on other forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

rbridgeVlanTable 5.1.214.1.3.1
A table that contains information about VLANs on the RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeVlanEntry

rbridgeVlanEntry 5.1.214.1.3.1.1
A list of information about VLANs on the RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeVlanEntry  

rbridgeVlanIndex 5.1.214.1.3.1.1.1
The VLAN-ID referring to this VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4094 | 4096..4294967295  

rbridgeVlanForwarderLosts 5.1.214.1.3.1.1.2
The number of times this RBridge has lost appointed forwarder status for this VLAN on any of its ports. Discontinuities in the value of this counter can occur at re-initialization of the management system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rbridgeVlanDisableLearning 5.1.214.1.3.1.1.3
Disable learning of MAC addresses seen in this VLAN. One application of this may be to restrict learning to ESADI. To disable learning, the value of this object should be set to 'true'. The default is 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeVlanSnooping 5.1.214.1.3.1.1.4
IP Multicast Snooping on this VLAN. For RBridges performing both IPv4 and IPv6 IP Multicast Snooping, the value returned is ipv4v6(4).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(1), ipv4(2), ipv6(3), ipv4v6(4)  

rbridgeVlanPortTable 5.1.214.1.3.2
A table that contains information about VLANs on an RBridge port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeVlanPortEntry

rbridgeVlanPortEntry 5.1.214.1.3.2.1
A list of information about VLANs on the RBridge port.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeVlanPortEntry  

rbridgeVlanPortInhibited 5.1.214.1.3.2.1.1
This VLAN has been inhibited by the RBridge due to conflicting forwarder information received from another RBridge, when the value of this object is 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rbridgeVlanPortForwarder 5.1.214.1.3.2.1.2
This RBridge is an appointed forwarder for this VLAN on this port, when the value of this object is 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rbridgeVlanPortAnnouncing 5.1.214.1.3.2.1.3
TRILL-Hellos tagged with this VLAN can be sent by this RBridge on this port, when the value of this object is 'true'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rbridgeVlanPortDetectedVlanMapping 5.1.214.1.3.2.1.4
VLAN mapping has been detected on the link attached to this port, when the value of this object is 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rbridgePortCounterTable 5.1.214.1.5.1
A table that contains per-port counters for this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgePortCounterEntry

rbridgePortCounterEntry 5.1.214.1.5.1.1
Counters for a port on this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgePortCounterEntry  

rbridgePortRpfCheckFails 5.1.214.1.5.1.1.1
The number of times a multi-destination frame was dropped on this port because the Reverse Path Forwarding (RPF) check failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rbridgePortHopCountExceeds 5.1.214.1.5.1.1.2
The number of times a frame was dropped on this port because its hop count was zero. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rbridgePortOptionDrops 5.1.214.1.5.1.1.3
The number of times a frame was dropped on this port because it contained unsupported options. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rbridgePortTrillInFrames 5.1.214.1.5.1.1.4
The number of TRILL-encapsulated frames that have been received by this port from its attached link, including management frames. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rbridgePortTrillOutFrames 5.1.214.1.5.1.1.5
The number of TRILL-encapsulated frames that have been transmitted by this port to its attached link, including management frames. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rbridgeEsadiTable 5.1.214.1.4.1
A table that contains information about ESADI instances on VLANs, if available.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeEsadiEntry

rbridgeEsadiEntry 5.1.214.1.4.1.1
Information about an ESADI instance on a VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeEsadiEntry  

rbridgeEsadiEnable 5.1.214.1.4.1.1.1
If the RBridge is participating in an ESADI instance for this VLAN, the value of this object is 'true'. To disable participation, set it to 'false'. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

rbridgeEsadiConfidence 5.1.214.1.4.1.1.2
Confidence level of address entries sent by this ESADI instance. The default is 16. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

rbridgeEsadiDrbPriority 5.1.214.1.4.1.1.3
The priority of this RBridge for being selected as the DRB for this ESADI instance. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..127  

rbridgeEsadiDrb 5.1.214.1.4.1.1.4
The DRB on this ESADI instance's virtual link.
Status: current Access: read-only
OBJECT-TYPE    
  RbridgeAddress  

rbridgeEsadiDrbHoldingTime 5.1.214.1.4.1.1.5
The holding time for this ESADI instance. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..127  

rbridgeEsadiRowStatus 5.1.214.1.4.1.1.6
This object indicates the status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rbridgeSnoopingPortTable 5.1.214.1.6.1
For RBridges implementing IP Multicast Snooping, information about ports on which the presence of IPv4 or IPv6 multicast routers has been detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeSnoopingPortEntry

rbridgeSnoopingPortEntry 5.1.214.1.6.1.1
Information about ports on which the presence of IPv4 or IPv6 multicast routers has been detected for a VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeSnoopingPortEntry  

rbridgeSnoopingPortAddrType 5.1.214.1.6.1.1.1
The IP address type of an IP multicast router detected on this port and VLAN. If only IPv4 router(s) are detected, the value returned is 'ipv4'. If only IPv6 routers are detected, the value returned is 'ipv6'. If both IPv4 and IPv6 routers are detected on this port and VLAN, the value returned is 'ipv4v6'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), ipv4v6(3)  

rbridgeSnoopingAddrTable 5.1.214.1.6.2
For RBridges implementing IP Multicast Snooping, information about IP multicast addresses being snooped.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeSnoopingAddrEntry

rbridgeSnoopingAddrEntry 5.1.214.1.6.2.1
Information about IP multicast addresses being snooped.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeSnoopingAddrEntry  

rbridgeSnoopingAddrType 5.1.214.1.6.2.1.1
The IP multicast address type for which a listener has been detected by this RBridge. This MIB requires support for only IPv4 and IPv6 address types.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

rbridgeSnoopingAddr 5.1.214.1.6.2.1.2
The IP multicast address for which a listener has been detected by this RBridge. The address type of this object is specified in rbridgeSnoopingAddrType. This MIB requires support for only global IPv4 and IPv6 addresses, so the length of the object can be either 4 or 16 bytes. Hence, the index will not exceed the OID size limit.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

rbridgeSnoopingAddrPorts 5.1.214.1.6.2.1.3
The set of ports on which a listener has been detected for this IP multicast address.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

rbridgeDtreePriority 5.1.214.1.7.1
The distribution tree root priority for this RBridge. The default value of this object is 32768. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

rbridgeDtreeActiveTrees 5.1.214.1.7.2
The total number of trees being computed by all RBridges in the campus.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeDtreeMaxTrees 5.1.214.1.7.3
The maximum number of trees this RBridge can compute.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeDtreeDesiredUseTrees 5.1.214.1.7.4
The maximum number of trees this RBridge would like to use for transmission of ingress multi-destination frames.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeDtreeTable 5.1.214.1.7.5
Information about distribution trees being computed by this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeDtreeEntry

rbridgeDtreeEntry 5.1.214.1.7.5.1
List of information about distribution trees being computed by this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeDtreeEntry  

rbridgeDtreeNumber 5.1.214.1.7.5.1.1
The tree number of a distribution tree being computed by this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

rbridgeDtreeNickname 5.1.214.1.7.5.1.2
The nickname of the distribution tree.
Status: current Access: read-only
OBJECT-TYPE    
  RbridgeNickname  

rbridgeDtreeIngress 5.1.214.1.7.5.1.3
Indicates whether this RBridge might choose this distribution tree to ingress a multi-destination frame.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rbridgeTrillMinMtuDesired 5.1.214.1.8.1
The desired minimum acceptable inter-RBridge link MTU for the campus, that is, originatingLSPBufferSize. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rbridgeTrillSz 5.1.214.1.8.2
The minimum acceptable inter-RBridge link size for the campus for the proper operation of TRILL IS-IS.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeTrillMaxMtuProbes 5.1.214.1.8.3
The number of failed MTU-probes before the RBridge concludes that a particular MTU is not supported by a neighbor. The value of this object MUST be retained across re-initializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

rbridgeTrillNbrTable 5.1.214.1.8.4
Information about this RBridge's TRILL neighbors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbridgeTrillNbrEntry

rbridgeTrillNbrEntry 5.1.214.1.8.4.1
List of information about this RBridge's TRILL neighbors.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbridgeTrillNbrEntry  

rbridgeTrillNbrMacAddr 5.1.214.1.8.4.1.1
The MAC address of a neighbor of this RBridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rbridgeTrillNbrMtu 5.1.214.1.8.4.1.2
MTU size for this neighbor for IS-IS communication purposes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rbridgeTrillNbrFailedMtuTest 5.1.214.1.8.4.1.3
If true, indicates that the neighbor's tested MTU is less than the minimum acceptable inter-bridge link MTU for the campus (1470).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rbridgeBaseNewDrb 5.1.214.0.1
The rbridgeBaseNewDrb notification indicates that the sending agent has become the new Designated RBridge; the notification is sent by an RBridge soon after its election as the new DRB root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election.
Status: current Access: read-only
NOTIFICATION-TYPE    

rbridgeBaseTopologyChange 5.1.214.0.2
The rbridgeBaseTopologyChange notification is sent by an RBridge when any of its configured ports transition to/from the VLAN-x designated forwarder. The notification is not sent if an rbridgeBaseNewDrb notification is sent for the same transition.
Status: current Access: read-only
NOTIFICATION-TYPE    

rbridgeCompliances 5.1.214.2.1
OBJECT IDENTIFIER    

rbridgeGroup 5.1.214.2.2
OBJECT IDENTIFIER    

rbridgeBaseGroup 5.1.214.2.2.1
A collection of objects providing basic control and status information for the RBridge.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeBaseNicknameGroup 5.1.214.2.2.2
A collection of objects providing basic control and status information for RBridge nicknames.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeBasePortGroup 5.1.214.2.2.3
A collection of objects providing basic control and status information for RBridge ports.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeFdbGroup 5.1.214.2.2.4
A collection of objects providing information about the Unicast Address Database.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeFibGroup 5.1.214.2.2.5
A collection of objects providing information about the Unicast and Multicast FIBs.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeVlanGroup 5.1.214.2.2.6
A collection of objects providing information about VLANs on the RBridge.
Status: current Access: read-only
OBJECT-GROUP    

rbridgePortCounterGroup 5.1.214.2.2.7
A collection of objects providing per-port counters for the RBridge.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeEsadiGroup 5.1.214.2.2.8
A collection of objects providing information about ESADI instances on the RBridge.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeSnoopingGroup 5.1.214.2.2.9
A collection of objects providing information about IP Multicast Snooping. This MIB requires support for only global IPv4 and IPv6 address types in rbridgeSnoopingPortAddrType and rbridgeSnoopingAddrType, so the length of rbridgeSnoopingAddr can be either 4 or 16 bytes.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeDtreeGroup 5.1.214.2.2.10
A collection of objects providing information about distribution trees.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeTrillGroup 5.1.214.2.2.11
A collection of objects providing information about TRILL neighbors.
Status: current Access: read-only
OBJECT-GROUP    

rbridgeNotificationGroup 5.1.214.2.2.12
A collection of objects describing notifications (traps).
Status: current Access: read-only
NOTIFICATION-GROUP    

rbridgeCompliance 5.1.214.2.1.1
The compliance statement for support of RBridge services.
Status: current Access: read-only
MODULE-COMPLIANCE    

rbridgeReadOnlyCompliance 5.1.214.2.1.2
When this MIB is implemented in read-only mode, then the implementation can claim read-only compliance. In that case, RBridge objects can be monitored but cannot be configured with this implementation.
Status: current Access: read-only
MODULE-COMPLIANCE