RAPID-IPSEC-TUNNEL-MIB

File: RAPID-IPSEC-TUNNEL-MIB.mib (20516 bytes)

Imported modules

Imported symbols

Counter32	Integer32	MODULE-IDENTITY
OBJECT-TYPE	Unsigned32	Counter64
OBJECT-IDENTITY	enterprises	IpAddress
TimeTicks	DateAndTime	rapidstream

Defined Types

RSIpsecTunnelEntry
SEQUENCE
	rsIpsecTunnelID	Integer32
	rsIpsecTunnelLocalAddr	IpAddress
	rsIpsecTunnelPeerAddr	IpAddress
	rsIpsecTunnelInSpi	Integer32
	rsIpsecTunnelOutSpi	Integer32
	rsIpsecTunnelCreateTime	DateAndTime
	rsIpsecTunnelDeviceID	Unsigned32
	rsIpsecTunnelEspEncryptAlg	INTEGER
	rsIpsecTunnelEspAuthAlg	INTEGER
	rsIpsecTunnelAhAuthAlg	INTEGER
	rsIpsecTunnelMode	INTEGER
	rsIpsecTunnelKeyMode	INTEGER
	rsIpsecTunnelLifeTime	TimeTicks
	rsIpsecTunnelLifeLength	Counter32
	rsIpsecTunnelInSaBytes	Counter32
	rsIpsecTunnelOutSaBytes	Counter32
	rsIpsecTunnelAccSecs	Counter32
	rsIpsecTunnelSelectorProtocol	INTEGER
	rsIpsecTunnelSelectorRemoteIPType	INTEGER
	rsIpsecTunnelSelectorRemoteIPOne	IpAddress
	rsIpsecTunnelSelectorRemoteIPTwo	IpAddress
	rsIpsecTunnelSelectorRemotePort	INTEGER
	rsIpsecTunnelSelectorLocalIPType	INTEGER
	rsIpsecTunnelSelectorLocalIPOne	IpAddress
	rsIpsecTunnelSelectorLocalIPTwo	IpAddress
	rsIpsecTunnelSelectorLocalPort	INTEGER
	rsIpsecTunnelNumRekey	Counter32
	rsIpsecTunnelInKbytes	Counter32
	rsIpsecTunnelOutKbytes	Counter32
	rsIpsecTunnelInPackets	Counter32
	rsIpsecTunnelOutPackets	Counter32
	rsIpsecTunnelInDecryptErrors	Counter32
	rsIpsecTunnelInAuthErrors	Counter32
	rsIpsecTunnelInReplayErrors	Counter32
	rsIpsecTunnelInOtherErrors	Counter32
	rsIpsecTunnelOutDecryptErrors	Counter32
	rsIpsecTunnelOutAuthErrors	Counter32
	rsIpsecTunnelOutReplayErrors	Counter32
	rsIpsecTunnelOutOtherErrors	Counter32
	rsIpsecTunnelUdpEncap	INTEGER
	rsIpsecTunnelPeerUdpPort	INTEGER
	rsIpsecTunnelOrigPeerAddr	IpAddress

Defined Values

rsInfoModule		1.3.6.1.4.1.4355.6
The MIB module describes various tunnel objects of RapidStream system.
MODULE-IDENTITY

rsIpsecTunnelMIB		1.3.6.1.4.1.4355.6.5
This is the base object identifier for all tunnel branches.
Status: current	Access: read-write
OBJECT-IDENTITY

rsIpsecTunnel		1.3.6.1.4.1.4355.6.5.1
This is the base object identifier for all tunnel information.
Status: current	Access: read-write
OBJECT-IDENTITY

rsIpsecTunnelNum		1.3.6.1.4.1.4355.6.5.1.1
The total number of entries in the rsIpsecTunnelTable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rsIpsecTunnelTable		1.3.6.1.4.1.4355.6.5.1.2
This is the connection table describing all current tunnels exist on this entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RSIpsecTunnelEntry

rsIpsecTunnelEntry		1.3.6.1.4.1.4355.6.5.1.2.1
An entry (conceptual row) containing the information on a tunnel between two security gateways.
Status: current	Access: not-accessible
OBJECT-TYPE
	RSIpsecTunnelEntry

rsIpsecTunnelID		1.3.6.1.4.1.4355.6.5.1.2.1.1
The running index of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rsIpsecTunnelLocalAddr		1.3.6.1.4.1.4355.6.5.1.2.1.2
The local IP address of the current tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpsecTunnelPeerAddr		1.3.6.1.4.1.4355.6.5.1.2.1.3
The remote IP address of the current tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpsecTunnelInSpi		1.3.6.1.4.1.4355.6.5.1.2.1.4
The security parameters index of inbound SA's within this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rsIpsecTunnelOutSpi		1.3.6.1.4.1.4355.6.5.1.2.1.5
The security parameters index of outbound SA's within this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rsIpsecTunnelCreateTime		1.3.6.1.4.1.4355.6.5.1.2.1.6
The date and time when the tunnel is created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

rsIpsecTunnelDeviceID		1.3.6.1.4.1.4355.6.5.1.2.1.7
The identifier of target device where the SA resides.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rsIpsecTunnelEspEncryptAlg		1.3.6.1.4.1.4355.6.5.1.2.1.8
The encryption algorithm used in the tunnel. It's 0 if ESP is not used.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), des(2), three-des(3)

rsIpsecTunnelEspAuthAlg		1.3.6.1.4.1.4355.6.5.1.2.1.9
The authentication algorithm used in the tunnel. It's 0 if ESP is not used.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), md5(2), sha(3)

rsIpsecTunnelAhAuthAlg		1.3.6.1.4.1.4355.6.5.1.2.1.10
The AH authentication algorithm used in the tunnel. It's 0 if AH is not used.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), md5(2), sha(3)

rsIpsecTunnelMode		1.3.6.1.4.1.4355.6.5.1.2.1.11
The tunnel/transport mode of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), tunnel(1), transport(2)

rsIpsecTunnelKeyMode		1.3.6.1.4.1.4355.6.5.1.2.1.12
The key mode of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), manual(1), auto-ike(2), other(3)

rsIpsecTunnelLifeTime		1.3.6.1.4.1.4355.6.5.1.2.1.13
The life time (in hundredths of a second) of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rsIpsecTunnelLifeLength		1.3.6.1.4.1.4355.6.5.1.2.1.14
The maximum traffic in bytes that the tunnel is allowed to support.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInSaBytes		1.3.6.1.4.1.4355.6.5.1.2.1.15
Current active inbound SA bytes of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutSaBytes		1.3.6.1.4.1.4355.6.5.1.2.1.16
Current active outbound SA bytes of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelAccSecs		1.3.6.1.4.1.4355.6.5.1.2.1.17
The number of seconds that the tunnel has existed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelSelectorProtocol		1.3.6.1.4.1.4355.6.5.1.2.1.18
The ip protocol number that this SA selector carries, or 0 if it carries any protocol.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	any(0), icmp(1), igmp(2), ipip(4), tcp(6), egp(8), pup(12), udp(17), idp(22), tp(29), ipv6(41), ipv6-routing(43), ipv6-fragmentation(44), rsvp(46), gre(47), esp(50), ah(51), icmpv6(58), none(59), dstopts(60), mtp(92), encap(98), pim(103), raw(255)

rsIpsecTunnelSelectorRemoteIPType		1.3.6.1.4.1.4355.6.5.1.2.1.19
The type of remote IP address of the SA selector in the entity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ip-addr-single(1), ip-addr-subnet(2), ip-addr-range(3)

rsIpsecTunnelSelectorRemoteIPOne		1.3.6.1.4.1.4355.6.5.1.2.1.20
The first remote IP address of the SA selector in the entity. It's IP address if remote IP of this selector only has one address. It's IP address of subnet if the remote IP of this selector is IP subnet. It's the start IP address if the remote IP of this selector has a range of addresses.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpsecTunnelSelectorRemoteIPTwo		1.3.6.1.4.1.4355.6.5.1.2.1.21
The second remote IP address of the SA selector in the entity. It's 0 if remote IP of this selector only has one address. It's netmask of subnet if the remote IP of this selector is IP subnet. It's the end IP address if the remote IP of this selector has a range of addresses.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpsecTunnelSelectorRemotePort		1.3.6.1.4.1.4355.6.5.1.2.1.22
The remote port used by this selector in the entity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rsIpsecTunnelSelectorLocalIPType		1.3.6.1.4.1.4355.6.5.1.2.1.23
The type of local IP address of the SA selector in the entity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ip-addr-single(1), ip-addr-subnet(2), ip-addr-range(3)

rsIpsecTunnelSelectorLocalIPOne		1.3.6.1.4.1.4355.6.5.1.2.1.24
The first local IP address of the SA selector in the entity. It's IP address if local IP of this selector only has one address. It's IP address of subnet if the local IP of this selector is IP subnet. It's the start IP address if the local IP of this selector has a range of IP addresses.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpsecTunnelSelectorLocalIPTwo		1.3.6.1.4.1.4355.6.5.1.2.1.25
The second local IP address of the SA selector in the entity. It's 0 if local IP of this selector only has one address. It's netmask of subnet if the local IP of this selector is IP subnet. It's the end IP address if the local IP of this selector has a range of IP addresses.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpsecTunnelSelectorLocalPort		1.3.6.1.4.1.4355.6.5.1.2.1.26
The local port used by this selector in the entity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rsIpsecTunnelNumRekey		1.3.6.1.4.1.4355.6.5.1.2.1.27
The number of rekeys of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInKbytes		1.3.6.1.4.1.4355.6.5.1.2.1.28
Total inbound traffic in Kbytes since the establish of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutKbytes		1.3.6.1.4.1.4355.6.5.1.2.1.29
Total outound traffic in Kbytes since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInPackets		1.3.6.1.4.1.4355.6.5.1.2.1.30
Total number of inbound packets since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutPackets		1.3.6.1.4.1.4355.6.5.1.2.1.31
Total number of outound packets since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInDecryptErrors		1.3.6.1.4.1.4355.6.5.1.2.1.32
Total number of packets discarded due to decryption error since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInAuthErrors		1.3.6.1.4.1.4355.6.5.1.2.1.33
Total number of packets discarded due to authentication error since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInReplayErrors		1.3.6.1.4.1.4355.6.5.1.2.1.34
Total number of packets discarded due to replay error since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelInOtherErrors		1.3.6.1.4.1.4355.6.5.1.2.1.35
The number of packets discarded due to errors other than decryption, authentication or replay errors. This may include packets dropped due to a lack of receive buffers, and may include packets dropped due to congestion at the decryption element.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutDecryptErrors		1.3.6.1.4.1.4355.6.5.1.2.1.36
Total number of packets discarded due to decryption error since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutAuthErrors		1.3.6.1.4.1.4355.6.5.1.2.1.37
Total number of packets discarded due to authentication error since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutReplayErrors		1.3.6.1.4.1.4355.6.5.1.2.1.38
Total number of packets discarded due to replay error since the establish of this connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelOutOtherErrors		1.3.6.1.4.1.4355.6.5.1.2.1.39
The number of packets discarded due to errors other than decryption, authentication or replay errors. This may include packets dropped due to a lack of receive buffers, and may include packets dropped due to congestion at the decryption element.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rsIpsecTunnelUdpEncap		1.3.6.1.4.1.4355.6.5.1.2.1.40
Indicates whether if UDP encapsulated IPSec has been enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

rsIpsecTunnelPeerUdpPort		1.3.6.1.4.1.4355.6.5.1.2.1.41
The peer's UDP port of current tunnel when UDP encapsulated IPSec is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rsIpsecTunnelOrigPeerAddr		1.3.6.1.4.1.4355.6.5.1.2.1.42
The original peer ip address of current tunnel when UDP encapsulated IPSec is enabled
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress