RAISECOM-COMMON-MANAGEMENT-MIB

File: RAISECOM-COMMON-MANAGEMENT-MIB.mib (19505 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SWITCH-TC
RAISECOM-BASE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 IpAddress Unsigned32
DisplayString TimeStamp RowStatus
TruthValue DateAndTime EnableVar
raisecomAgent

Defined Types

RaisecomConfigFileOperationEntry  
SEQUENCE    
  raisecomConfigFileNodeType INTEGER
  raisecomConfigFileNodeInfo OCTET STRING
  raisecomConfigFileOperationType INTEGER

Defined Values

raisecomCommonManagement 1.3.6.1.4.1.8886.1.2
The MIB module defining objects for common management
MODULE-IDENTITY    

raisecomCommonFunctionGroup 1.3.6.1.4.1.8886.1.2.1
OBJECT IDENTIFIER    

raisecomNotificationGroup 1.3.6.1.4.1.8886.1.2.4
OBJECT IDENTIFIER    

raisecomClockGroup 1.3.6.1.4.1.8886.1.2.5
OBJECT IDENTIFIER    

raisecomConfigLoadOperation 1.3.6.1.4.1.8886.1.2.1.1
Syetem Load Configuration .Includes to erase the start-up config, or to save the running config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), saving(2), erasing(3), reboot(4), restore(5), reload(6), backupsaving(7), cpoyStaConf2BackConf(8), cpoyBackConf2StaConf(9), switStaConfBackConf(10), backuperasing(11), eraseStartupconfig(12), eraseStartupconfigAll(13), savingall(14)  

raisecomConfigLoadNotificationOnCompletion 1.3.6.1.4.1.8886.1.2.1.2
Specifies whether or not a raisecomConfigLoadOnCompletion notification should be issued on completion of some operation . If such a notification is desired, it is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

raisecomConfigLoadState 1.3.6.1.4.1.8886.1.2.1.3
Specifies the state of this load configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), running(2), successful(3), failed(4)  

raisecomSystemClock 1.3.6.1.4.1.8886.1.2.1.4
Seconds elapsed from Jan. 1,1970,same as UNIX TIME.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

raisecomConfigLoadMIBTraps 1.3.6.1.4.1.8886.1.2.1.5
OBJECT IDENTIFIER    

raisecomConfigLoadCompletion 1.3.6.1.4.1.8886.1.2.1.5.1
A raisecomConfigLoadeCompletion trap is sent when saving or erasing the configuration file.
Status: current Access: read-write
NOTIFICATION-TYPE    

raisecomWatchdog 1.3.6.1.4.1.8886.1.2.1.6
Set/get watchdog status.
Status: current Access: read-write
OBJECT-TYPE    
  EnableVar  

raisecomClearRunningConfig 1.3.6.1.4.1.8886.1.2.1.7
the operation to clear running-config
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearAll(1)  

raisecomReloadStartupConfig 1.3.6.1.4.1.8886.1.2.1.8
The operation to reload startup-config file
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearAndReload(1)  

raisecomCfgUpdateState 1.3.6.1.4.1.8886.1.2.1.9
Specifies the state of this configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), noupdate(1), cliupdate(2), webupdate(3), mibupdate(4)  

raisecomCfgUpdateModID 1.3.6.1.4.1.8886.1.2.1.10
Specifies ID of the module which has updated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

raisecomAutoWritecfgEnable 1.3.6.1.4.1.8886.1.2.1.12
Set/get auto writing configuration status.
Status: current Access: read-write
OBJECT-TYPE    
  EnableVar  

raisecomMibCommandString 1.3.6.1.4.1.8886.1.2.1.13
comnmand string executed by mib user
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

raisecomMibCommandMode 1.3.6.1.4.1.8886.1.2.1.14
command run on specific mode
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 user-node(0), auth-node(1), view-node(2), auth-enable-node(3), enable-node(4), vlan-node(5), interface-node(6), interface-range-node(7), aggregator-node(8), tdm-node(9), ip-node(10), lbip-node(11), mpls-exppath-node(12), tunnel-node(13), vlanif-node(14), subif-node(15), vrf-node(16), config-node(17), rip-node(18), bgp-node(19)  

raisecomMibCommandState 1.3.6.1.4.1.8886.1.2.1.15
the state of comnmand executed
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 cmd-success(0), cmd-warning(1), cmd-err-no-match(2), cmd-err-ambiguous(3), cmd-err-incomplete(4), cmd-err-exeed-argc-max(5), cmd-err-nothing-todo(6), cmd-complete-full-match(7), cmd-no-right(11), cmd-err-author-failure(12)  

raisecomAutoWritecfgInterval 1.3.6.1.4.1.8886.1.2.1.16
Interval time of auto save module.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

raisecomConfigFileOperationTableGroup 1.3.6.1.4.1.8886.1.2.1.17
OBJECT IDENTIFIER    

raisecomConfigFileOperationTable 1.3.6.1.4.1.8886.1.2.1.17.1
Config file operation table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RaisecomConfigFileOperationEntry

raisecomConfigFileOperationEntry 1.3.6.1.4.1.8886.1.2.1.17.1.1
An entry in raisecomConfigFileOperationTable
Status: current Access: not-accessible
OBJECT-TYPE    
  RaisecomConfigFileOperationEntry  

raisecomConfigFileNodeType 1.3.6.1.4.1.8886.1.2.1.17.1.1.1
Config file operation node type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER slot-type(1)  

raisecomConfigFileNodeInfo 1.3.6.1.4.1.8886.1.2.1.17.1.1.2
Config file operation node info.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

raisecomConfigFileOperationType 1.3.6.1.4.1.8886.1.2.1.17.1.1.3
Config file operation type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER erase(1)  

raisecomObjectStatusDesc 1.3.6.1.4.1.8886.1.2.4.1
The object status description of the notification currently being sent.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

raisecomNotificationDesc 1.3.6.1.4.1.8886.1.2.4.2
The description of the notification currently being sent.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

raisecomNotificationLevel 1.3.6.1.4.1.8886.1.2.4.3
The notification severity level of the notification currently being sent.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

raisecomNotificationCategory 1.3.6.1.4.1.8886.1.2.4.4
The notification category of the notification currently being sent.such as Environment,Complement
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

raisecomNotificationLocation 1.3.6.1.4.1.8886.1.2.4.101
The description of location which notification generates. This is a display string which can be showned on NMS such like OpenView
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

raisecomClockDateAndTime 1.3.6.1.4.1.8886.1.2.5.1
The current local date and time for the system. Setting this object is equivalent to setting an automated clock and calendar. The value of the object will track the date and time from the value set. Note that due to hardware limitations some systems may not be able to preserve such meaning across reboots of the system, as indicated by csyClockLostOnReboot. A constant value of all zeros and length 8 indicates the system is not aware of the present date and time. This object may be read-only on some systems.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

raisecomClockLostOnReboot 1.3.6.1.4.1.8886.1.2.5.2
Indication of whether the system can preserve knowledge of current date and time across a system reboot. A value of 'true' indicates the clock must be reset from some external source each time the system reboots. A value of 'false' indicates the system has the ability to keep time across reboots.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

raisecomSummerTime 1.3.6.1.4.1.8886.1.2.5.3
OBJECT IDENTIFIER    

raisecomSummerTimeEnable 1.3.6.1.4.1.8886.1.2.5.3.1
An indication of whether the summertime feature is enabled on this device. When this object is set to enable, then raisecomSummerTimeOffset, raisecomSummerTimeRecurringStart and raisecomSummerTimeRecurringEnd objects are set to default values. When this object is set to disable, then raisecomSummerTimeOffset, raisecomSummerTimeRecurringStart, raisecomSummerTimeRecurringEnd objects are not instantiated and the summertime feature is disabled
Status: current Access: read-write
OBJECT-TYPE    
  EnableVar  

raisecomSummerTimeOffset 1.3.6.1.4.1.8886.1.2.5.3.2
The value of this object indicates number of minutes to add or to subtract during summertime. This object is not instantiated when raisecomSummerTimeEnable object is set to disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1440  

raisecomSummerTimeRecurringStart 1.3.6.1.4.1.8886.1.2.5.3.3
Indicates summertime starts at this time every year. octets contents range 1 week 1..5,ff last = ff 2 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 where january = 1 december = 12 5 hour 0..23 6 min 0..59 For example, the first Monday in Feb at 13:30pm should be given as 01 02 00 02 0e 1e For the last Tuesday in dec at 1:20am should be given as ff 03 00 0c 01 14 This object is not instantiated when raisecomSummerTimeEnable object is set to disable.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

raisecomSummerTimeRecurringEnd 1.3.6.1.4.1.8886.1.2.5.3.4
Indicates summertime ends at this time every year. octets contents range 1 week 1..5,ff where ff = last 2-3 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 where january = 1 december = 12 5 hour 0..23 6 min 0..59 For example, the third friday in February at 3:30am should be given as 03 06 00 02 03 1e For the first Tuesday in May at 1:20am should be given as 01 03 00 05 01 14 This object is not instantiated when raisecomSummerTimeEnable object is set to disable.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

raisecomClockMode 1.3.6.1.4.1.8886.1.2.5.4
System clock mode, which range from 1 to 3, stands for default mode, timestamp mode and auxiliary clock mode respectively. It allows network administrator to change system clock mechanism by setting this variable. For instance, if administrator intend to use auxiliary clock as system timer, whom is required to set this variable's value as 3, i.e SYSCLK-AUX. All supported values of this variable are listed as follows: 1: SYSCLK-DFLT default mode 2: SYSCLK-TS timestamp mode 3: SYSCLK-AUX auxiliary clock mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sysclk-dflt(1), sysclk-ts(2), sysclk-aux(3)  

raisecomClockDisplay 1.3.6.1.4.1.8886.1.2.5.5
System clock display mode, which range from 1 to 3, stands for default mode, UTC mode and other clock mode which is made to prepare for fulture respectively. It allows network administrator to change system clock mechanism by setting this variable. For instance, if administrator intend to use default display mode, the time will be shown as 'yyyy-mm-dd, hh:mm:ss'. else if if administrator intend to use UTC display mode, the time will be shown as'dd.mm.yyyy-hh:mm:ss' All supported values of this variable are listed as follows: 1: EraisecomClockDisplay-DFLT default mode 2: EraisecomClockDisplay-UTC UTC mode 3: EraisecomClockDisplay-other other mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eraisecomClockDisplay-DFLT(1), eraisecomClockDisplay-UTC(2), eraisecomClockDisplay-other(3)  

raisecomClockTimezoneName 1.3.6.1.4.1.8886.1.2.5.6
The name of the time zone
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)