RAIDMANAGER2-MIB

File: RAIDMANAGER2-MIB.mib (15452 bytes)

Imported modules

RFC1155-SMI

RFC-1212

RFC1213-MIB

Imported symbols

enterprises

OBJECT-TYPE

DisplayString

Defined Types

SsEntry
SEQUENCE
	ssEntryIndex	INTEGER
	ssSubsysName	DisplayString
	ssOverallStatus	INTEGER
	ssDiskStatus	INTEGER
	ssPowerStatus	INTEGER
	ssFanStatus	INTEGER
	ssCacheBatteryStatus	INTEGER
	ssTemperatureStatus	INTEGER
	ssCommStatus	INTEGER
	ssEmuExtInputStatus	INTEGER
	ssEmuPresent	INTEGER
	ssController1Status	INTEGER
	ssController1SerNum	DisplayString
	ssController1RDAC	INTEGER
	ssController1Type	DisplayString
	ssController1ProdID	DisplayString
	ssController1FwRev	DisplayString
	ssController1HwRev	DisplayString
	ssController2Status	INTEGER
	ssController2SerNum	DisplayString
	ssController2RDAC	INTEGER
	ssController2Type	DisplayString
	ssController2ProdID	DisplayString
	ssController2FwRev	DisplayString
	ssController2HwRev	DisplayString
	ssUpsStatus	INTEGER
	ssLunStatus	INTEGER

Defined Values

dec		1.3.6.1.4.1.36
OBJECT IDENTIFIER

ema		1.3.6.1.4.1.36.2
OBJECT IDENTIFIER

sysobjids		1.3.6.1.4.1.36.2.15
OBJECT IDENTIFIER

agent		1.3.6.1.4.1.36.2.15.1
OBJECT IDENTIFIER

workstation		1.3.6.1.4.1.36.2.15.2
OBJECT IDENTIFIER

subsys		1.3.6.1.4.1.36.2.15.3
OBJECT IDENTIFIER

agManufacturer		1.3.6.1.4.1.36.2.15.1.1
The name of the Enterprise Storage Manager Agent manufacturer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agMajVersion		1.3.6.1.4.1.36.2.15.1.2
Enterprise Storage Manager Agent Major Version Number (e.g., 3 for 3.0).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

agMinVersion		1.3.6.1.4.1.36.2.15.1.3
Enterprise Storage Manager Agent Minor Version Number (e.g., 0 for 3.0).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

agHostName		1.3.6.1.4.1.36.2.15.1.4
The Host System Network Name where the agent resides.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agEnterprise		1.3.6.1.4.1.36.2.15.1.5
The Enterprise ID subtree for Enterprise Storage Manager Agent MIB is registered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

agDescription		1.3.6.1.4.1.36.2.15.1.6
The Enterprise Array Storage Agent description.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

wsCPU		1.3.6.1.4.1.36.2.15.2.1
The workstation CPU type (e.g., 80486).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

wsComputerType		1.3.6.1.4.1.36.2.15.2.2
The workstation Computer type (e.g., PC/AT).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

wsModel		1.3.6.1.4.1.36.2.15.2.3
The workstation model number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wsSubModel		1.3.6.1.4.1.36.2.15.2.4
The workstation submodel number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wsBiosVersion		1.3.6.1.4.1.36.2.15.2.5
The workstation BIOS Version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

wsOS		1.3.6.1.4.1.36.2.15.2.6
The workstation operating system name (e.g., WINNT).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

wsOSMajVersion		1.3.6.1.4.1.36.2.15.2.7
The workstation OS major version number (e.g., 3 for WINNT 3.51).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wsOSMinVersion		1.3.6.1.4.1.36.2.15.2.8
The workstation OS minor version number (e.g., 51 for WINNT 3.51).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ssTotalSubSystems		1.3.6.1.4.1.36.2.15.3.1
The total number of subsystems presently serviced by this agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ssStatusTable		1.3.6.1.4.1.36.2.15.3.2
This table holds the status information for each subsystem.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SsEntry

ssEntry		1.3.6.1.4.1.36.2.15.3.2.1
The subsystem information entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SsEntry

ssEntryIndex		1.3.6.1.4.1.36.2.15.3.2.1.1
The index into ssStatusTable .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ssSubsysName		1.3.6.1.4.1.36.2.15.3.2.1.2
The local Subsystem Name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssOverallStatus		1.3.6.1.4.1.36.2.15.3.2.1.3
This variable reports the overall status of the storage subsystem. GREEN: Normal Operating Condition YELLOW: Warning Condition RED: Subsystem Communication Failure; No response to Agent requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	green(0), yellow(1), red(2)

ssDiskStatus		1.3.6.1.4.1.36.2.15.3.2.1.4
This variable reports the overall status for the physical devices in the subsystem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	all-ok(0), at-least-1-failure(1)

ssPowerStatus		1.3.6.1.4.1.36.2.15.3.2.1.5
This variable reports the status for the Power Supply system in the subsystem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	all-ok(0), at-least-1-failure(1)

ssFanStatus		1.3.6.1.4.1.36.2.15.3.2.1.6
This variable reports the status for the FAN system in the subsystem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	all-ok(0), at-least-1-failure(1)

ssCacheBatteryStatus		1.3.6.1.4.1.36.2.15.3.2.1.7
This variable reports the status for the Cache Battery in the subsystem. This status object is currently non-functional but in place for future use.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal-charge(0), low-charge(1)

ssTemperatureStatus		1.3.6.1.4.1.36.2.15.3.2.1.8
This variable reports the status for the Temperature in the subsystem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), over-temp-condition(1)

ssCommStatus		1.3.6.1.4.1.36.2.15.3.2.1.9
This variable reports the status for the communication to the Primary Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), communication-failure(1)

ssEmuExtInputStatus		1.3.6.1.4.1.36.2.15.3.2.1.10
This variable reports the status for the EMU external input.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	all-ok(0), at-least-1-failure(1)

ssEmuPresent		1.3.6.1.4.1.36.2.15.3.2.1.11
This variable reports the availability of the Environment Monitoring Unit for the storage subsystem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	emu-not-present(0), emu-present(1)

ssController1Status		1.3.6.1.4.1.36.2.15.3.2.1.12
This variable reports the status for the Primary Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), failed(1)

ssController1SerNum		1.3.6.1.4.1.36.2.15.3.2.1.13
The Primary Controller's Serial Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController1RDAC		1.3.6.1.4.1.36.2.15.3.2.1.14
The Primary Controller MODE.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	single-mode(0), dual-mode(1)

ssController1Type		1.3.6.1.4.1.36.2.15.3.2.1.15
The Primary Controller's Type indicator.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController1ProdID		1.3.6.1.4.1.36.2.15.3.2.1.16
The Primary Controller's Product ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController1FwRev		1.3.6.1.4.1.36.2.15.3.2.1.17
The Primary Controller's Firmware Revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController1HwRev		1.3.6.1.4.1.36.2.15.3.2.1.18
The Primary Controller's Hardware Revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController2Status		1.3.6.1.4.1.36.2.15.3.2.1.19
This variable reports the status for the Secondary Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), failed(1)

ssController2SerNum		1.3.6.1.4.1.36.2.15.3.2.1.20
The Secondary Controller's Serial Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController2RDAC		1.3.6.1.4.1.36.2.15.3.2.1.21
The Secondary Controller MODE.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	single-mode(0), dual-mode(1)

ssController2Type		1.3.6.1.4.1.36.2.15.3.2.1.22
The Secondary Controller's Type indicator.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController2ProdID		1.3.6.1.4.1.36.2.15.3.2.1.23
The Secondary Controller's Product ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController2FwRev		1.3.6.1.4.1.36.2.15.3.2.1.24
The Secondary Controller's Firmware Revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssController2HwRev		1.3.6.1.4.1.36.2.15.3.2.1.25
The Secondary Controller's Hardware Revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ssUpsStatus		1.3.6.1.4.1.36.2.15.3.2.1.26
Uninterruptable Power Supply status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ups-not-present(0), ups-present(1)

ssLunStatus		1.3.6.1.4.1.36.2.15.3.2.1.27
LUN status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ups-not-present(0), ups-present(1)