RADWARE-MIB

File: RADWARE-MIB.mib (191169 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215

Imported symbols

NetworkAddress	IpAddress	Counter
Gauge	enterprises	OBJECT-TYPE
DisplayString	PhysAddress	ipAddrEntry
TRAP-TYPE

Defined Types

TruthValue
INTEGER	true(1), false(2)

RowStatus
INTEGER	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)

NetNumber
OCTET STRING	Size(4)

RndCommunityEntry
SEQUENCE
	rndCommunityMngStationAddr	IpAddress
	rndCommunityString	DisplayString
	rndCommunityAccess	INTEGER
	rndCommunityTrapsEnable	INTEGER
	rndCommunityStatus	INTEGER

RndIfEntry
SEQUENCE
	rndIfIndex	INTEGER
	rndIfBoardNum	INTEGER
	rndIfNetAddress	NetworkAddress
	rndIfStatus	INTEGER
	rndIfClockType	INTEGER
	rndIfBaudRate	INTEGER
	rndIfCost	INTEGER
	rndIfCompression	INTEGER
	rndIfCompressionStatus	INTEGER
	rndIfCompressionRate	INTEGER
	rndIfLATCompression	INTEGER
	rndIfCompressionType	INTEGER
	rndIfFilterMode	INTEGER
	rndIfChannelType	INTEGER
	rndIfBridge	INTEGER
	rndHighPriorityIf	INTEGER
	rndWanHeader	INTEGER
	rndDuplexMode	INTEGER

RndFACSActEntry
SEQUENCE
	rndFACSActType	INTEGER
	rndFACSActIfIndex	INTEGER
	rndFACSAction	INTEGER

RndFACSEntry
SEQUENCE
	rndFACSIfIndex	INTEGER
	rndFACSProtocolType	INTEGER
	rndFACSType	INTEGER
	rndFACSIndex	INTEGER
	rndFACSSrcAdd	OCTET STRING
	rndFACSSrcAddMask	OCTET STRING
	rndFACSDesAdd	OCTET STRING
	rndFACSDesAddMask	OCTET STRING
	rndFACSOperation	INTEGER
	rndFACSNetFiltering	INTEGER
	rndFACSSoketNum	INTEGER
	rndFACSMask1Id	INTEGER
	rndFACSMask2Id	INTEGER
	rndFACSStatus	INTEGER

RsIpAddrEntry
SEQUENCE
	rsIpAdEntAddr	IpAddress
	rsIpAdEntIfIndex	INTEGER
	rsIpAdEntNetMask	IpAddress
	rsIpAdEntForwardIpBroadcast	INTEGER
	rsIpAdEntReasmMaxSize	INTEGER
	rsIpAdEntStatus	INTEGER
	rsIpAdEntBcastAddr	INTEGER
	rsIpAdEntVlanTag	INTEGER

RsIcmpRdEntry
SEQUENCE
	rsIcmpRdIpAddr	IpAddress
	rsIcmpRdIpAdvertAddr	IpAddress
	rsIcmpRdMaxAdvertInterval	INTEGER
	rsIcmpRdMinAdvertInterval	INTEGER
	rsIcmpRdAdvertLifetime	INTEGER
	rsIcmpRdAdvertise	INTEGER
	rsIcmpRdPreferenceLevel	INTEGER
	rsIcmpRdEntStatus	INTEGER

RsRip2IfConfEntry
SEQUENCE
	rsRip2IfConfAddress	IpAddress
	rsRip2IfConfVirtualDis	INTEGER
	rsRip2IfConfAutoSend	INTEGER

IpRedundRoutersEntry
SEQUENCE
	ipRedundRoutersIfAddr	IpAddress
	ipRedundRoutersMainRouterAddr	IpAddress
	ipRedundRoutersOperStatus	INTEGER
	ipRedundRoutersPollInterval	INTEGER
	ipRedundRoutersTimeout	INTEGER
	ipRedundRoutersStatus	INTEGER

RsIpRipFilterGlbEntry
SEQUENCE
	rsIpRipFilterGlbType	INTEGER
	rsIpRipFilterGlbNumber	INTEGER
	rsIpRipFilterGlbStatus	INTEGER
	rsIpRipFilterGlbIpAddr	IpAddress
	rsIpRipFilterGlbNetworkMaskBits	INTEGER
	rsIpRipFilterGlbMatchBits	INTEGER
	rsIpRipFilterGlbAction	INTEGER

RsIpRipFilterLclEntry
SEQUENCE
	rsIpRipFilterLclIpIntf	IpAddress
	rsIpRipFilterLclType	INTEGER
	rsIpRipFilterLclNumber	INTEGER
	rsIpRipFilterLclStatus	INTEGER
	rsIpRipFilterLclIpAddr	IpAddress
	rsIpRipFilterLclNetworkMaskBits	INTEGER
	rsIpRipFilterLclMatchBits	INTEGER
	rsIpRipFilterLclAction	INTEGER

VirtualLanEntry
SEQUENCE
	vlIfIndex	INTEGER
	vlProto	INTEGER
	vlAutoConfigEnable	TruthValue
	vlStatus	RowStatus
	vlType	INTEGER

VirtualLanPortEntry
SEQUENCE
	vLIfIndex	INTEGER
	vLPortIfIndex	INTEGER
	vLPortType	INTEGER
	vLPortStatus	RowStatus

VirtualLanAutoConfEntry
SEQUENCE
	vlAutoConfProto	INTEGER
	vlAutoConfPortIfIndex	INTEGER
	vlAutoConfStatus	RowStatus

RsIfType
INTEGER	ppp(23), frameRelay(32), virtualNet(500), rndWan(1000), cod(1001), backup(1002), fr1490(1003), b1isdn(1010), b2isdn(1011), unknown(1100)

RsIfConfEntry
SEQUENCE
	rsIfConfIndex	INTEGER
	rsIfConfType	RsIfType
	rsIfConfName	DisplayString
	rsIfConfStatus	RowStatus

EventMessageEntry
SEQUENCE
	eventNum	INTEGER
	eventDesc	DisplayString

ReaBridgeFftEntry
SEQUENCE
	reaBrgFftEntryNum	INTEGER
	reaBrgFftMacAddr	PhysAddress
	reaBrgFftReNum	INTEGER
	reaBrgFftPortNum	INTEGER
	reaBrgFftFacsSrcIndex	INTEGER
	reaBrgFftFacsDstIndex	INTEGER

ReaIpFftEntry
SEQUENCE
	reaIpFftEntryNum	INTEGER
	reaIpFftDstIpAddr	IpAddress
	reaIpFftDstIpMask	IpAddress
	reaIpFftRangeType	INTEGER
	reaIpFftSrcMacAddr	PhysAddress
	reaIpFftDstMacAddr	PhysAddress
	reaIpFftReNum	INTEGER
	reaIpFftPortNum	INTEGER
	reaIpFftFacsSrcIndex	INTEGER
	reaIpFftFacsDstIndex	INTEGER
	reaIpFftApplFlags	OCTET STRING

ReaIpxFftEntry
SEQUENCE
	reaIpxFftEntryNum	INTEGER
	reaIpxFftDstNetid	INTEGER
	reaIpxFftRangeType	INTEGER
	reaIpxFftSrcMacAddr	PhysAddress
	reaIpxFftDstMacAddr	PhysAddress
	reaIpxFftReNum	INTEGER
	reaIpxFftPortNum	INTEGER
	reaIpxFftFacsSrcIndex	INTEGER
	reaIpxFftFacsDstIndex	INTEGER

LreVnResposibilityEntry
SEQUENCE
	lreVnRespVn	INTEGER
	lreVnRespStatus	RowStatus

RndMonitoredElementEntry
SEQUENCE
	rndMonitoredElementAddress	IpAddress
	rndMonitoredElementCommunity	DisplayString	Size(1..20)
	rndMonitoredElementLabel	DisplayString	Size(1..20)
	rndDefaultPollingInterval	INTEGER
	rndDefaultLogFile	DisplayString
	rndMonitoredElementStatus	RowStatus

RndMonitoringEntry
SEQUENCE
	rndMonitoredElement	DisplayString	Size(1..20)
	rndMonitoredObjectInstanceLabel	DisplayString
	rndMonitoredObjectName	DisplayString
	rndMonitoredObjectIdentifier	OBJECT IDENTIFIER
	rndMonitoredObjectInstance	OBJECT IDENTIFIER
	rndMonitoredObjectSyntax	INTEGER
	rndMonitoringInterval	INTEGER
	rndAlarmMaxTreshold	INTEGER
	rndAlarmMinTreshold	INTEGER
	rndMonitoringLogfile	DisplayString
	rndMonitoringEntryStatus	RowStatus

RndMibFileEntry
SEQUENCE
	rndMibFileIndex	INTEGER
	rndMibFilePath	DisplayString
	rndMibFileRefresh	INTEGER
	rndMibFileEntryStatus	RowStatus

RndDeleteValuesEntry
SEQUENCE
	rndRowStatusVariableName	DisplayString
	rndRowStatusObjectId	OBJECT IDENTIFIER
	rndRowDeleteValue	INTEGER
	rndDeleteValueEntryStatus	RowStatus

RsIpZhrStatusEntry
SEQUENCE
	rsIpZhrStatusIpIntf	IpAddress
	rsIpZhrAdminStatus	INTEGER

RsIpZhrVirtAddressEntry
SEQUENCE
	rsIpZhrVirtAddressIpIntf	IpAddress
	rsIpZhrVirtAddressTo	IpAddress
	rsIpZhrVirtAddressFrom	IpAddress
	rsIpZhrVirtAddressStatus	RowStatus

RsIpZhrConnectionEntry
SEQUENCE
	rsIpZhrConnectionIpIntf	IpAddress
	rsIpZhrConnectionSrcIp	IpAddress
	rsIpZhrConnectionDestIp	IpAddress
	rsIpZhrConnectionVirtualIp	IpAddress
	rsIpZhrConnectionType	INTEGER
	rsIpZhrConnectionAge	INTEGER
	rsIpZhrConnectionStatus	RowStatus

RsWSDServerStatEntry
SEQUENCE
	rsWSDSerStatName	DisplayString
	rsWSDSerStatAttUsersNum	INTEGER
	rsWSDSerStatPeakLoad	INTEGER
	rsWSDSerStatFramesRate	INTEGER
	rsWSDSerStatFramesLoad	Counter
	rsWSDSerStatRecoveryTime	INTEGER
	rsWSDSerStatWarmUpTime	INTEGER
	rsWSDSerStatConnectionLimit	INTEGER
	rsWSDSerStatAdminStatus	INTEGER
	rsWSDSerStatConnectionLimitReached	INTEGER

WsdRedundEntry
SEQUENCE
	wsdRedundFarmAddr	IpAddress
	wsdRedundMainWsdAddr	IpAddress
	wsdRedundOperStatus	INTEGER
	wsdRedundPollInterval	INTEGER
	wsdRedundTimeout	INTEGER
	wsdRedundStatus	INTEGER

RsWSDNTCheckEntry
SEQUENCE
	rsWSDNTSerialNum	INTEGER
	rsWSDNTFrequentCheckPeriod	INTEGER
	rsWSDNTOpenSessionsWeight	INTEGER
	rsWSDNTIncomingTrafficWeight	INTEGER
	rsWSDNTOutgoingTrafficWeight	INTEGER
	rsWSDNTRegularCheckPeriod	INTEGER
	rsWSDNTAvResponseWeight	INTEGER
	rsWSDNTUsersLimitWeight	INTEGER
	rsWSDNTTCPLimitWeight	INTEGER
	rsWSDNTRetries	INTEGER
	rsWSDNTCommunity	DisplayString

RsWSDPrivateCheckEntry
SEQUENCE
	rsWSDPrivateSerialNum	INTEGER
	rsWSDPrivateSpecialCheckPeriod	INTEGER
	rsWSDPrivateExtraVar1ID	OBJECT IDENTIFIER
	rsWSDPrivateExtraVar1Weight	INTEGER
	rsWSDPrivateExtraVar2ID	OBJECT IDENTIFIER
	rsWSDPrivateExtraVar2Weight	INTEGER
	rsWSDPrivateRetries	INTEGER
	rsWSDPrivateCommunity	DisplayString
	rsWSDPrivateExtraVar1Mode	INTEGER
	rsWSDPrivateExtraVar2Mode	INTEGER

RsWSDIfEntry
SEQUENCE
	rsWSDIfIndex	INTEGER
	rsWSDIfBoardNum	INTEGER
	rsWSDIfNetAddress	NetworkAddress
	rsWSDIfStatus	INTEGER
	rsWSDIfClockType	INTEGER
	rsWSDIfBaudRate	INTEGER
	rsWSDIfCost	INTEGER
	rsWSDIfCompression	INTEGER
	rsWSDIfCompressionStatus	INTEGER
	rsWSDIfCompressionRate	INTEGER
	rsWSDIfLATCompression	INTEGER
	rsWSDIfCompressionType	INTEGER
	rsWSDIfFilterMode	INTEGER
	rsWSDIfChannelType	INTEGER
	rsWSDIfBridge	INTEGER
	rsWSDHighPriorityIf	INTEGER
	rsWSDWanHeader	INTEGER
	rsWSDDuplexMode	INTEGER

RsWSDApplicationMirrorEntry
SEQUENCE
	rsWSDMirrorActiveAddress	IpAddress
	rsWSDMirrorActiveStatus	INTEGER

RsWSDSCProtcolsEntry
SEQUENCE
	rsWSDSCProtocol	INTEGER
	rsWSDSCProtocolStatus	INTEGER

RsWSDSNMPPortsEntry
SEQUENCE
	rsWSDSNMPPhysicalPortNumber	INTEGER
	rsWSDSNMPPhysicalPortState	INTEGER

RsWSDTelnetUserEntry
SEQUENCE
	rsWSDTelnetUserName	DisplayString
	rsWSDTelnetUserPassword	DisplayString
	rsWSDTelnetUserEAddr	DisplayString
	rsWSDTelnetUserSeverity	INTEGER
	rsWSDTelnetUserStatus	RowStatus
	rsWSDTelnetUserGroup	DisplayString

RsSSDvirtualLanEntry
SEQUENCE
	rsSSDvlIfIndex	INTEGER
	rsSSDvlProto	INTEGER
	rsSSDvlAutoConfigEnable	TruthValue
	rsSSDvlStatus	RowStatus
	rsSSDvlType	INTEGER
	rsSSDvlTag	INTEGER
	rsSSDvlPriority	INTEGER

RsSSDvirtualLanPortEntry
SEQUENCE
	rsSSDvLIfIndex	INTEGER
	rsSSDvLPortIfIndex	INTEGER
	rsSSDvLPortType	INTEGER
	rsSSDvLPortStatus	RowStatus
	rsSSDvLPortTag	INTEGER

RsPhysPortMirrorEntry
SEQUENCE
	rsPhysPortMirrorSrcInf	INTEGER
	rsPhysPortMirrorDstPort	INTEGER
	rsPhysPortMirrorRxTx	INTEGER
	rsPhysPortMirrorRxBroadCast	INTEGER
	rsPhysPortMirrorStatus	RowStatus
	rsPhysPortMirrorBackupDstPort	INTEGER
	rsPhysPortMirrorDstStatus	INTEGER
	rsPhysPortMirrorBackupStatus	INTEGER
	rsPhysPortMirrorActiveDstPort	INTEGER

RsVWSDDataPermissionsTableEntry
SEQUENCE
	rsVWSDUserGroup	DisplayString
	rsVWSDDataType	OCTET STRING
	rsVWSDDataItems	OCTET STRING
	rsVWSDDataStatus	RowStatus

RsWSDManagementPortsEntry
SEQUENCE
	rsWSDPortIndex	INTEGER
	rsWSDPortOperation	INTEGER

RsWSDStaticForwardingEntry
SEQUENCE
	rsWSDStaticSourcePort	INTEGER
	rsWSDStaticDestinationPort	INTEGER
	rsWSDStaticPortOperation	INTEGER
	rsWSDStaticStatus	RowStatus

RsIfEntry
SEQUENCE
	rsIfIndex	INTEGER
	rsIfSpeed	INTEGER
	rsIfDuplex	INTEGER
	rsIfAutoNegotiate	INTEGER
	rsIfRowStatus	RowStatus

Defined Values

rnd		1.3.6.1.4.1.89
OBJECT IDENTIFIER

rndMng		1.3.6.1.4.1.89.1
OBJECT IDENTIFIER

rndSysId		1.3.6.1.4.1.89.1.1
Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), lte(9), iprouter(10), ielb(11), leb(12), openGate12(13), openGate4(14), ran(15), itlb(16), gatelinx(17), openGate2(18), ogRanTR(19), stc(20), ftc(21), armon(22), fccs1004(23), fccs1012(24), rdapter(25), ogvan(26), wanGate(27), ogRubE(28), ogRubT(29), elX(30), vGate4(31), mrt(32), ogSrubET(33), vanXS(34), lre(35), vGate2(36), serverDispatcher4(37), serverDispatcher2(38), vGate2Fast(39), serverDispatcher2Fast(40), prt(41), mlm(42), prt11(43), quickOffice(44), apollo(45), radware(62)

rndAction		1.3.6.1.4.1.89.1.2
This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1), sendNetworkTab(2), deleteNetworkTab(3), sendRoutingTab(4), deleteRoutingTab(5), sendLanTab(6), deleteLanTab(7), deleteArpTab(8), sendArpTab(9), deleteRouteTab(10), sendRouteTab(11), backupSPFRoutingTab(12), backupIPRoutingTab(13), backupNetworkTab(14), backupLanTab(15), backupArpTab(16), backupIPXRipTab(17), backupIPXSAPTab(18), resetCDB(19), eraseCDB(20), deleteZeroHopRoutingAllocTab(21)

rndFileName		1.3.6.1.4.1.89.1.3
The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

rndDeviceParams		1.3.6.1.4.1.89.2
OBJECT IDENTIFIER

rndBridgeType		1.3.6.1.4.1.89.2.1
Identification of the RND bridge type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)

rndInactiveArpTimeOut		1.3.6.1.4.1.89.2.2
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndBridgeAlarm		1.3.6.1.4.1.89.2.3
OBJECT IDENTIFIER

rndErrorDesc		1.3.6.1.4.1.89.2.3.1
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

rndErrorSeverity		1.3.6.1.4.1.89.2.3.2
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndBrgVersion		1.3.6.1.4.1.89.2.4
The bridge version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

rndBrgFeatures		1.3.6.1.4.1.89.2.5
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

rndBrgLicense		1.3.6.1.4.1.89.2.6
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

rndIpHost		1.3.6.1.4.1.89.2.7
OBJECT IDENTIFIER

rndICMPTransmitionEnable		1.3.6.1.4.1.89.2.7.1
This variable controlls the ability to transmit ICMP frames
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rndCommunityTable		1.3.6.1.4.1.89.2.7.2
The community table of the agent
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndCommunityEntry

rndCommunityEntry		1.3.6.1.4.1.89.2.7.2.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndCommunityEntry

rndCommunityMngStationAddr		1.3.6.1.4.1.89.2.7.2.1.1
The management station that will be allowed to communicate with the agent IP address
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rndCommunityString		1.3.6.1.4.1.89.2.7.2.1.2
The community string with which the management station will communicate with the agent
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

rndCommunityAccess		1.3.6.1.4.1.89.2.7.2.1.3
The allowed access to this management station
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	readOnly(1), readWrite(2), super(3)

rndCommunityTrapsEnable		1.3.6.1.4.1.89.2.7.2.1.4
Should the agent send traps to the management station
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	trapsEnable(1), trapsDisable(2)

rndCommunityStatus		1.3.6.1.4.1.89.2.7.2.1.5
The status of this entry. If the status is invalid the community entry will be deleted
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), invalid(2)

rndManagedTime		1.3.6.1.4.1.89.2.8
The time will be sent in the format hhmmss
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6)

rndManagedDate		1.3.6.1.4.1.89.2.9
The date will be sent in the format ddmmyyyy
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..8)

genGroup		1.3.6.1.4.1.89.2.11
OBJECT IDENTIFIER

genGroupHWVersion		1.3.6.1.4.1.89.2.11.1
Defines the HW version of the product.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

genGroupConfigurationSymbol		1.3.6.1.4.1.89.2.11.2
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1)

genGroupHWStatus		1.3.6.1.4.1.89.2.11.3
This attribute describes the status of the group hardware as detected by the sensors software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), hardwareProblems(2), notSupported(255)

rndInterface		1.3.6.1.4.1.89.4
OBJECT IDENTIFIER

rndIfTable		1.3.6.1.4.1.89.4.1
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndIfEntry

rndIfEntry		1.3.6.1.4.1.89.4.1.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndIfEntry

rndIfIndex		1.3.6.1.4.1.89.4.1.1.1
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndIfBoardNum		1.3.6.1.4.1.89.4.1.1.2
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndIfNetAddress		1.3.6.1.4.1.89.4.1.1.3
The IP address of the interface defined by the particular value of rndIfIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	NetworkAddress

rndIfStatus		1.3.6.1.4.1.89.4.1.1.4
The current status of the interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), okSingleBrg(2), okMultiBrg(3), connctFault(4), rxFault(5), txFault(6), channelLoopback(7), rxClockFault(8), t1Alarm(9)

rndIfClockType		1.3.6.1.4.1.89.4.1.1.5
rndIfClockType defines the type of clock each interface uses: internal or external.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	external(1), internal(2), t1(3), g703(4)

rndIfBaudRate		1.3.6.1.4.1.89.4.1.1.6
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndIfCost		1.3.6.1.4.1.89.4.1.1.7
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndIfCompression		1.3.6.1.4.1.89.4.1.1.8
Defines whether data compression is enabled or disabled for the interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rndIfCompressionStatus		1.3.6.1.4.1.89.4.1.1.9
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-inserted(1), active(2), not-active(3), disable(4)

rndIfCompressionRate		1.3.6.1.4.1.89.4.1.1.10
Percentage of compression. This variable applies only if rndCompressionStatus is active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndIfLATCompression		1.3.6.1.4.1.89.4.1.1.11
Enable/Disable the LAT Compression.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rndIfCompressionType		1.3.6.1.4.1.89.4.1.1.12
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), lowSpeed(2), highSpeed(3)

rndIfFilterMode		1.3.6.1.4.1.89.4.1.1.13
This parameter indicates the type of filtering in the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	destinationOnly(1), sourceAndDestination(2), none(3)

rndIfChannelType		1.3.6.1.4.1.89.4.1.1.14
The type of the WAN channel
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wanChannel(1), ogRanPort(2), routerToBridge(3), spsFramRelay(4), dialBackup(5), snar(6), lan(7), spsX25(8), frameRelay1490(9), frameRelay1490CAR(10), frameRelayCAR(11), ppp(12)

rndIfBridge		1.3.6.1.4.1.89.4.1.1.15
This variable indicates whether this interface forward Layer II pakages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rndHighPriorityIf		1.3.6.1.4.1.89.4.1.1.16
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rndWanHeader		1.3.6.1.4.1.89.4.1.1.17
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	regular(1), short(2)

rndDuplexMode		1.3.6.1.4.1.89.4.1.1.18
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	half(1), full(2)

rndIPX		1.3.6.1.4.1.89.12
OBJECT IDENTIFIER

rndFACS		1.3.6.1.4.1.89.16
OBJECT IDENTIFIER

rndFACSDefaultAction		1.3.6.1.4.1.89.16.1
Used to define the default action for the device, when no FACS statements applicable to a given frame are defined.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	block(1), forward(2), enable(3), disable(4), blockAndReport(129)

rndFACSActTable		1.3.6.1.4.1.89.16.2
The table of FACS action.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndFACSActEntry

rndFACSActEntry		1.3.6.1.4.1.89.16.2.1
Each rndFACSActEntry consist of the following parameters
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndFACSActEntry

rndFACSActType		1.3.6.1.4.1.89.16.2.1.1
This parameter indicate on which FACS Table the FACS action will preform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	tx(1), rx(2), activeDB(4), tempDB(5)

rndFACSActIfIndex		1.3.6.1.4.1.89.16.2.1.2
The interface to which this FACS entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndFACSAction		1.3.6.1.4.1.89.16.2.1.3
The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interface or no type is specified, all FACS statements for a protocol are erased.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), eraseIP(2), eraseDECnet(3), eraseIPX(4), eraseBrg(5), replaceIP(6), replaceIPX(8), replaceBrg(9), backupIP(10), backupIPX(12), backupBrg(13)

rndFACSTable		1.3.6.1.4.1.89.16.3
The table of FACS statment.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndFACSEntry

rndFACSEntry		1.3.6.1.4.1.89.16.3.1
Each FACS statment consist of the following parameters
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndFACSEntry

rndFACSIfIndex		1.3.6.1.4.1.89.16.3.1.1
The interface to which this FACS entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndFACSProtocolType		1.3.6.1.4.1.89.16.3.1.2
This parameter define the protocol the Security Access Control is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ip(1), ipx(2), dec(3), bridge(4)

rndFACSType		1.3.6.1.4.1.89.16.3.1.3
The Mode of in which this FACS statement operates.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	tx(1), rx(2), cod(3), activeDB(4), tempDB(5)

rndFACSIndex		1.3.6.1.4.1.89.16.3.1.4
Index to the FACS Table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndFACSSrcAdd		1.3.6.1.4.1.89.16.3.1.5
The size of the octet string will be according to the protocol type define in rndFACSProtocolType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

rndFACSSrcAddMask		1.3.6.1.4.1.89.16.3.1.6
Source-address mask .
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

rndFACSDesAdd		1.3.6.1.4.1.89.16.3.1.7
Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType .
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

rndFACSDesAddMask		1.3.6.1.4.1.89.16.3.1.8
Destination-address mask .
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

rndFACSOperation		1.3.6.1.4.1.89.16.3.1.9
... .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	block(1), forward(2), permit(3), deny(4), blockZHRP(5), blockAndReport(129)

rndFACSNetFiltering		1.3.6.1.4.1.89.16.3.1.10
... .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), l2multicast(2), arp(3), icmp(4), ip(5), udp(6), tcp(7), decnet(8), ipx(9)

rndFACSSoketNum		1.3.6.1.4.1.89.16.3.1.11
Port/socket number for different applications 0 is default meaning not applicable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndFACSMask1Id		1.3.6.1.4.1.89.16.3.1.12
Index into RND mask table FACS/COD Type) .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndFACSMask2Id		1.3.6.1.4.1.89.16.3.1.13
Index into RND mask table FACS/COD according to the value of rndFACSType .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndFACSStatus		1.3.6.1.4.1.89.16.3.1.14
The status of a table entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	valid(1), createRequest(2), underCreation(3), invalid(4)

rndBootP		1.3.6.1.4.1.89.24
OBJECT IDENTIFIER

rndBootPServerAddress		1.3.6.1.4.1.89.24.1
The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rndBootPRelaySecThreshold		1.3.6.1.4.1.89.24.2
BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipSpec		1.3.6.1.4.1.89.26
OBJECT IDENTIFIER

rsIpAddrTable		1.3.6.1.4.1.89.26.1
This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIpAddrEntry

rsIpAddrEntry		1.3.6.1.4.1.89.26.1.1
The addressing information for one of this entity's IP addresses.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIpAddrEntry

rsIpAdEntAddr		1.3.6.1.4.1.89.26.1.1.1
The IP address to which this entry's addressing information pertains.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpAdEntIfIndex		1.3.6.1.4.1.89.26.1.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIpAdEntNetMask		1.3.6.1.4.1.89.26.1.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsIpAdEntForwardIpBroadcast		1.3.6.1.4.1.89.26.1.1.4
This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsIpAdEntReasmMaxSize		1.3.6.1.4.1.89.26.1.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rsIpAdEntStatus		1.3.6.1.4.1.89.26.1.1.6
The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

rsIpAdEntBcastAddr		1.3.6.1.4.1.89.26.1.1.7
Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

rsIpAdEntVlanTag		1.3.6.1.4.1.89.26.1.1.8
The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

icmpSpec		1.3.6.1.4.1.89.26.2
OBJECT IDENTIFIER

rsIcmpGenErrMsgEnable		1.3.6.1.4.1.89.26.2.1
This variable controlls the ability to generate ICMP error messages
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsIcmpRdTable		1.3.6.1.4.1.89.26.2.2
This table contains ICMP Router Discovery parameters configurated per IP interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIcmpRdEntry

rsIcmpRdEntry		1.3.6.1.4.1.89.26.2.2.1
The ICMP parameters configurated for IP interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIcmpRdEntry

rsIcmpRdIpAddr		1.3.6.1.4.1.89.26.2.2.1.1
The IP address to which this entry's information pertains.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIcmpRdIpAdvertAddr		1.3.6.1.4.1.89.26.2.2.1.2
The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsIcmpRdMaxAdvertInterval		1.3.6.1.4.1.89.26.2.2.1.3
The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	4..1800

rsIcmpRdMinAdvertInterval		1.3.6.1.4.1.89.26.2.2.1.4
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	3..1800

rsIcmpRdAdvertLifetime		1.3.6.1.4.1.89.26.2.2.1.5
The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	4..9000

rsIcmpRdAdvertise		1.3.6.1.4.1.89.26.2.2.1.6
A flag indicating whether or not the address is to be advertised.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsIcmpRdPreferenceLevel		1.3.6.1.4.1.89.26.2.2.1.7
The preferability of the address as a default router address, relative to other router addresses on the same subnet.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIcmpRdEntStatus		1.3.6.1.4.1.89.26.2.2.1.8
Setting of any value to this object set values of all fields to the default values.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rip2Spec		1.3.6.1.4.1.89.26.3
OBJECT IDENTIFIER

rsRip2IfConfTable		1.3.6.1.4.1.89.26.3.1
This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsRip2IfConfEntry

rsRip2IfConfEntry		1.3.6.1.4.1.89.26.3.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsRip2IfConfEntry

rsRip2IfConfAddress		1.3.6.1.4.1.89.26.3.1.1.1
The IP Address of this system on the indicated subnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsRip2IfConfVirtualDis		1.3.6.1.4.1.89.26.3.1.1.2
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsRip2IfConfAutoSend		1.3.6.1.4.1.89.26.3.1.1.3
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

arpSpec		1.3.6.1.4.1.89.26.4
OBJECT IDENTIFIER

rsArpDeleteTable		1.3.6.1.4.1.89.26.4.1
Setting this object to any not-null value has the effect of deleting all entries of the ARP table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsArpInactiveTimeOut		1.3.6.1.4.1.89.26.4.2
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsArpProxy		1.3.6.1.4.1.89.26.4.3
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

tftp		1.3.6.1.4.1.89.26.5
OBJECT IDENTIFIER

rsTftpRetryTimeOut		1.3.6.1.4.1.89.26.5.1
General Retransmission time-out value (seconds)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsTftpTotalTimeOut		1.3.6.1.4.1.89.26.5.2
Total Retransmission time-out value (seconds)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsSendConfigFile		1.3.6.1.4.1.89.26.5.3
The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rsGetConfigFile		1.3.6.1.4.1.89.26.5.4
The file name include path where the Router Server will get the configuration. The default source address will be the sender address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rsLoadSoftware		1.3.6.1.4.1.89.26.5.5
The file name include path where the Router Server will get the software. The source address will the sender address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rsFileServerAddress		1.3.6.1.4.1.89.26.5.6
The IP address of the configuration / sw server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipRedundancy		1.3.6.1.4.1.89.26.6
OBJECT IDENTIFIER

ipRedundAdminStatus		1.3.6.1.4.1.89.26.6.1
This variable controls the IP Redundancy method in the device. In case the value is enable, it means the ARP redundancy mechanism is running .If the value is vrrp, it means the former redundancy mechanism is disabled, and the vrrp mechanism is enabled. If the value is disable, both redundancy methods are disabled
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), vrrp(3)

ipRedundOperStatus		1.3.6.1.4.1.89.26.6.2
obsolete
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

ipRedundRoutersTable		1.3.6.1.4.1.89.26.6.3
List of IP addresses backed up by this router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpRedundRoutersEntry

ipRedundRoutersEntry		1.3.6.1.4.1.89.26.6.3.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpRedundRoutersEntry

ipRedundRoutersIfAddr		1.3.6.1.4.1.89.26.6.3.1.1
The Ip address of the IP interface on which the redundancy feature is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ipRedundRoutersMainRouterAddr		1.3.6.1.4.1.89.26.6.3.1.2
The Ip address of the polled main router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ipRedundRoutersOperStatus		1.3.6.1.4.1.89.26.6.3.1.3
If active, the main router is considered inoperational and the IP interface operates as its backup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

ipRedundRoutersPollInterval		1.3.6.1.4.1.89.26.6.3.1.4
Polling interval for this router (in seconds). If 0 the router is not polled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipRedundRoutersTimeout		1.3.6.1.4.1.89.26.6.3.1.5
Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipRedundRoutersStatus		1.3.6.1.4.1.89.26.6.3.1.6
Entry status
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)

ipRouteLeaking		1.3.6.1.4.1.89.26.7
OBJECT IDENTIFIER

ipLeakStaticToRip		1.3.6.1.4.1.89.26.7.1
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ipLeakStaticToOspf		1.3.6.1.4.1.89.26.7.2
This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ipLeakOspfToRip		1.3.6.1.4.1.89.26.7.3
This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ipLeakRipToOspf		1.3.6.1.4.1.89.26.7.4
This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ipLeakExtDirectToOspf		1.3.6.1.4.1.89.26.7.5
This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ipRipFilter		1.3.6.1.4.1.89.26.8
OBJECT IDENTIFIER

rsIpRipFilterGlbTable		1.3.6.1.4.1.89.26.8.1
The table of RIP global filters per IP router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIpRipFilterGlbEntry

rsIpRipFilterGlbEntry		1.3.6.1.4.1.89.26.8.1.1
An entry in the RIP global filter table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIpRipFilterGlbEntry

rsIpRipFilterGlbType		1.3.6.1.4.1.89.26.8.1.1.1
Type of filter - input/output
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	input(1), output(2)

rsIpRipFilterGlbNumber		1.3.6.1.4.1.89.26.8.1.1.2
Number of RIP filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsIpRipFilterGlbStatus		1.3.6.1.4.1.89.26.8.1.1.3
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	valid(1), invalid(2), underCreation(3)

rsIpRipFilterGlbIpAddr		1.3.6.1.4.1.89.26.8.1.1.4
network prefix IP address, as in the forwarding table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsIpRipFilterGlbNetworkMaskBits		1.3.6.1.4.1.89.26.8.1.1.5
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIpRipFilterGlbMatchBits		1.3.6.1.4.1.89.26.8.1.1.6
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIpRipFilterGlbAction		1.3.6.1.4.1.89.26.8.1.1.7
Filter action - permit/deny for this network
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

rsIpRipFilterLclTable		1.3.6.1.4.1.89.26.8.2
Table of input/output RIP filters used per IP Interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIpRipFilterLclEntry

rsIpRipFilterLclEntry		1.3.6.1.4.1.89.26.8.2.1
An entry in the Intf RIP filter table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIpRipFilterLclEntry

rsIpRipFilterLclIpIntf		1.3.6.1.4.1.89.26.8.2.1.1
The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpRipFilterLclType		1.3.6.1.4.1.89.26.8.2.1.2
Type of filter - input/output
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	input(1), output(2)

rsIpRipFilterLclNumber		1.3.6.1.4.1.89.26.8.2.1.3
Number of RIP filter for this Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsIpRipFilterLclStatus		1.3.6.1.4.1.89.26.8.2.1.4
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	valid(1), invalid(2), underCreation(3)

rsIpRipFilterLclIpAddr		1.3.6.1.4.1.89.26.8.2.1.5
network prefix IP address, as in the forwarding table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsIpRipFilterLclNetworkMaskBits		1.3.6.1.4.1.89.26.8.2.1.6
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIpRipFilterLclMatchBits		1.3.6.1.4.1.89.26.8.2.1.7
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIpRipFilterLclAction		1.3.6.1.4.1.89.26.8.2.1.8
Filter action - permit/deny
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

rsRipEnable		1.3.6.1.4.1.89.26.9
Enables or disables RIP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

lreBoxAgentIP		1.3.6.1.4.1.89.26.10
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

virtualLan		1.3.6.1.4.1.89.27
OBJECT IDENTIFIER

virtualLanTable		1.3.6.1.4.1.89.27.1
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VirtualLanEntry

virtualLanEntry		1.3.6.1.4.1.89.27.1.1
A list of information for each virtual LAN.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VirtualLanEntry

vlIfIndex		1.3.6.1.4.1.89.27.1.1.1
An logical interface number, corresponded this VL
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vlProto		1.3.6.1.4.1.89.27.1.1.2
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), ip(2), ipmulticast(3), ipxRaw(4), ipxET(5), ipxLLC(6), ipxSNAP(7), decNET(8), decLAT(9), netBios(10), appleTalk(11), xns(12), sna(13), userDefined(14)

vlAutoConfigEnable		1.3.6.1.4.1.89.27.1.1.3
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

vlStatus		1.3.6.1.4.1.89.27.1.1.4
It is used to delete an entry
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

vlType		1.3.6.1.4.1.89.27.1.1.5
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	regular(1), specBroadcast(2), specArpReq(3), specBroadcastAndUnicast(4), specArpReqAndUnicast(5)

virtualLanPortsTable		1.3.6.1.4.1.89.27.2
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VirtualLanPortEntry

virtualLanPortEntry		1.3.6.1.4.1.89.27.2.1
A entry of this table specifies a VL and a port belonging to it
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VirtualLanPortEntry

vLIfIndex		1.3.6.1.4.1.89.27.2.1.1
An logical interface number, corresponding to this VL
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vLPortIfIndex		1.3.6.1.4.1.89.27.2.1.2
A physical port belonging to the VL specified by vlIfIndex.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vLPortType		1.3.6.1.4.1.89.27.2.1.3
static means configured by user dynamic means autoconfigured by the RS
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2)

vLPortStatus		1.3.6.1.4.1.89.27.2.1.4
It is used to delete an entry
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

virtualLanAutoConfTable		1.3.6.1.4.1.89.27.3
This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VirtualLanAutoConfEntry

virtualLanAutoConfEntry		1.3.6.1.4.1.89.27.3.1
One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in vlAutoConfProto.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VirtualLanAutoConfEntry

vlAutoConfPortIfIndex		1.3.6.1.4.1.89.27.3.1.1
Port on which the autoconfig option should be supported
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vlAutoConfProto		1.3.6.1.4.1.89.27.3.1.2
Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ip(2)

vlAutoConfStatus		1.3.6.1.4.1.89.27.3.1.3
It is used to delete an entry
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

virtualLanAutoConfAgingTimeout		1.3.6.1.4.1.89.27.4
The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

virtualLanProtocolVlan		1.3.6.1.4.1.89.27.5
OBJECT IDENTIFIER

virtualLanUserEtherType		1.3.6.1.4.1.89.27.5.1
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2)

virtualLanUserMask		1.3.6.1.4.1.89.27.5.2
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2)

rsConf		1.3.6.1.4.1.89.28
OBJECT IDENTIFIER

rsIfConfTable		1.3.6.1.4.1.89.28.1
This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIfConfEntry

rsIfConfEntry		1.3.6.1.4.1.89.28.1.1
Each entry defines a configured interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIfConfEntry

rsIfConfIndex		1.3.6.1.4.1.89.28.1.1.1
This variable uniquely identifies the interface. It is used as a cross reference in other system tables
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsIfConfType		1.3.6.1.4.1.89.28.1.1.2
This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is underCreation).
Status: mandatory	Access: read-write
OBJECT-TYPE
	RsIfType

rsIfConfName		1.3.6.1.4.1.89.28.1.1.3
This variable provides a logical name to a specific entry in rsIfConfTable
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rsIfConfStatus		1.3.6.1.4.1.89.28.1.1.4
The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait - A new instance of a conceptual row is desired, but not to have it available for use by the managed device. destroy - Delete all instances associated with an existing conceptual row.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsTunning		1.3.6.1.4.1.89.29
OBJECT IDENTIFIER

rsHighPriority		1.3.6.1.4.1.89.29.1
This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsLowPriority		1.3.6.1.4.1.89.29.2
This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsDbgLevel		1.3.6.1.4.1.89.29.3
This variable indicates the debug level the Router Server works. the range of this variable is 1..100
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsDiagnostic		1.3.6.1.4.1.89.29.4
This variable will contain some dignostic information in case on a problem ocurs in the RS functinality.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

rsConfirmMessagTab		1.3.6.1.4.1.89.29.5
This variable enables the operator to confirm all the message in the event Message Table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

eventMessageTable		1.3.6.1.4.1.89.29.6
The Event Message table of the agent
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EventMessageEntry

eventMessageEntry		1.3.6.1.4.1.89.29.6.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	EventMessageEntry

eventNum		1.3.6.1.4.1.89.29.6.1.1
The event number,the index of this table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

eventDesc		1.3.6.1.4.1.89.29.6.1.2
The event discription, this text will include time and severity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

reaTunning		1.3.6.1.4.1.89.29.7
OBJECT IDENTIFIER

reaIpRemoteAgingTime		1.3.6.1.4.1.89.29.7.1
This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

reaFftHashMaxChain		1.3.6.1.4.1.89.29.7.2
This variable specifies the maximum length of hash chains in the Fast Forwarding Tables.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

reaMltcstBitOn		1.3.6.1.4.1.89.29.7.3
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

reaIpForwardEnable		1.3.6.1.4.1.89.29.7.4
The Platform will perform fast IP forwarding if only if this variable's value is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaIpxForwardEnable		1.3.6.1.4.1.89.29.7.5
The Platform will perform fast IPX forwarding if only if this variable's value is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaBridgeEnable		1.3.6.1.4.1.89.29.7.6
The Platform will perform bridging if only if this variable's value is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaFacsEnable		1.3.6.1.4.1.89.29.7.7
The RS and Platform will perform FASC if only if this variable's value is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaIpForwardDatagrams		1.3.6.1.4.1.89.29.7.8
The number of IP datagrams have been forwarded by the Platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaIpInDiscards		1.3.6.1.4.1.89.29.7.9
The number of IP datagrams have been dicarded by the Platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaIpxForwardDatagrams		1.3.6.1.4.1.89.29.7.10
The number of IPX datagrams have been forwarded by the Platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaIpxInDiscards		1.3.6.1.4.1.89.29.7.11
The number of IP datagrams have been dicarded by the Platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaBridgeFftTable		1.3.6.1.4.1.89.29.7.12
The Bridge Fast Forwarding Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ReaBridgeFftEntry

reaBridgeFftEntry		1.3.6.1.4.1.89.29.7.12.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ReaBridgeFftEntry

reaBrgFftEntryNum		1.3.6.1.4.1.89.29.7.12.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaBrgFftMacAddr		1.3.6.1.4.1.89.29.7.12.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

reaBrgFftReNum		1.3.6.1.4.1.89.29.7.12.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaBrgFftPortNum		1.3.6.1.4.1.89.29.7.12.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaBrgFftFacsSrcIndex		1.3.6.1.4.1.89.29.7.12.1.5
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaBrgFftFacsDstIndex		1.3.6.1.4.1.89.29.7.12.1.6
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaBrgDiscards		1.3.6.1.4.1.89.29.7.13
The number of bridging datagrams have been discarded by the Platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaBrgForwards		1.3.6.1.4.1.89.29.7.14
The number of bridging datagrams have been forwarded by the Platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaIpFftTable		1.3.6.1.4.1.89.29.7.15
The IP Fast Forwarding Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ReaIpFftEntry

reaIpFftEntry		1.3.6.1.4.1.89.29.7.15.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ReaIpFftEntry

reaIpFftEntryNum		1.3.6.1.4.1.89.29.7.15.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpFftDstIpAddr		1.3.6.1.4.1.89.29.7.15.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

reaIpFftDstIpMask		1.3.6.1.4.1.89.29.7.15.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

reaIpFftRangeType		1.3.6.1.4.1.89.29.7.15.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	direct(1), remote(2)

reaIpFftSrcMacAddr		1.3.6.1.4.1.89.29.7.15.1.5
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

reaIpFftDstMacAddr		1.3.6.1.4.1.89.29.7.15.1.6
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

reaIpFftReNum		1.3.6.1.4.1.89.29.7.15.1.7
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpFftPortNum		1.3.6.1.4.1.89.29.7.15.1.8
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpFftFacsSrcIndex		1.3.6.1.4.1.89.29.7.15.1.9
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpFftFacsDstIndex		1.3.6.1.4.1.89.29.7.15.1.10
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpFftApplFlags		1.3.6.1.4.1.89.29.7.15.1.11
A bit mask that defines the applications associated with this entry: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: Server Dispatcher Client
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

reaIpxFftTable		1.3.6.1.4.1.89.29.7.16
The IPX Fast Forwarding Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ReaIpxFftEntry

reaIpxFftEntry		1.3.6.1.4.1.89.29.7.16.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ReaIpxFftEntry

reaIpxFftEntryNum		1.3.6.1.4.1.89.29.7.16.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpxFftDstNetid		1.3.6.1.4.1.89.29.7.16.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpxFftRangeType		1.3.6.1.4.1.89.29.7.16.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	direct(1), remote(2)

reaIpxFftSrcMacAddr		1.3.6.1.4.1.89.29.7.16.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

reaIpxFftDstMacAddr		1.3.6.1.4.1.89.29.7.16.1.5
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

reaIpxFftReNum		1.3.6.1.4.1.89.29.7.16.1.6
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpxFftPortNum		1.3.6.1.4.1.89.29.7.16.1.7
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpxFftFacsSrcIndex		1.3.6.1.4.1.89.29.7.16.1.8
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

reaIpxFftFacsDstIndex		1.3.6.1.4.1.89.29.7.16.1.9
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lreVnResposibilityTable		1.3.6.1.4.1.89.29.7.17
The Bridge Responsibility Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LreVnResposibilityEntry

lreVnResposibilityEntry		1.3.6.1.4.1.89.29.7.17.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LreVnResposibilityEntry

lreVnRespVn		1.3.6.1.4.1.89.29.7.17.1.1
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

lreVnRespStatus		1.3.6.1.4.1.89.29.7.17.1.2
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

reaSrcViolationEnable		1.3.6.1.4.1.89.29.7.18
The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaSrcViolationTrapEnable		1.3.6.1.4.1.89.29.7.19
The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaSrcAddrValidationEnable		1.3.6.1.4.1.89.29.7.20
The Platform will verify the source address of incoming IP datagram.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

reaRsQueueDiscards		1.3.6.1.4.1.89.29.7.21
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

reaBufFree		1.3.6.1.4.1.89.29.7.22
The number of free buffers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lreResetDstMacBit46		1.3.6.1.4.1.89.29.7.23
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

lreQueSourceSelect		1.3.6.1.4.1.89.29.7.24
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	vNET(1), dstMac(2)

lreResetDstMacBit47		1.3.6.1.4.1.89.29.7.25
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsMaxEntriesTuning		1.3.6.1.4.1.89.29.8
OBJECT IDENTIFIER

rsMaxBridgeForwardingEntriesTuning		1.3.6.1.4.1.89.29.8.1
OBJECT IDENTIFIER

rsMaxBrgFrwEntries		1.3.6.1.4.1.89.29.8.1.1
Maximal number of entries in bridge forwarding table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxBrgFrwEntriesAfterReset		1.3.6.1.4.1.89.29.8.1.2
Future maximal number of entries in bridge forwarding table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxIpForwardingEntriesTuning		1.3.6.1.4.1.89.29.8.2
OBJECT IDENTIFIER

rsMaxIpFrwEntries		1.3.6.1.4.1.89.29.8.2.1
Maximal number of entries in Ip forwarding table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxIpFrwEntriesAfterReset		1.3.6.1.4.1.89.29.8.2.2
Future maximal number of entries in Ip forwarding table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxArpEntriesTuning		1.3.6.1.4.1.89.29.8.3
OBJECT IDENTIFIER

rsMaxArpEntries		1.3.6.1.4.1.89.29.8.3.1
Maximal number of entries in Arp forwarding table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxArpEntriesAfterReset		1.3.6.1.4.1.89.29.8.3.2
Future maximal number of entries in Arp forwarding table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxIpxForwardingEntriesTuning		1.3.6.1.4.1.89.29.8.4
OBJECT IDENTIFIER

rsMaxIpxFrwEntries		1.3.6.1.4.1.89.29.8.4.1
Maximal number of entries in Ipx forwarding table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxIpxFrwEntriesAfterReset		1.3.6.1.4.1.89.29.8.4.2
Future maximal number of entries in Ipx forwarding table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxIpxSapEntriesTuning		1.3.6.1.4.1.89.29.8.5
OBJECT IDENTIFIER

rsMaxIpxSapEntries		1.3.6.1.4.1.89.29.8.5.1
Maximal number of entries in IpxSap table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxIpxSapEntriesAfterReset		1.3.6.1.4.1.89.29.8.5.2
Future maximal number of entries in IpxSap table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxDspClntEntriesTuning		1.3.6.1.4.1.89.29.8.6
OBJECT IDENTIFIER

rsMaxDspClntEntries		1.3.6.1.4.1.89.29.8.6.1
Maximal number of entries in rsSdClientsTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxDspClntEntriesAfterReset		1.3.6.1.4.1.89.29.8.6.2
Future maximal number of entries in rsSdClientsTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxZeroHopRoutEntriesTuning		1.3.6.1.4.1.89.29.8.7
OBJECT IDENTIFIER

rsMaxZhrConns		1.3.6.1.4.1.89.29.8.7.1
The current maximal number of direct Zero-hop routing connections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxZhrConnsAfterReset		1.3.6.1.4.1.89.29.8.7.2
The future (after reset) maximal number of direct Zero-hop routing connections.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxDspFrmEntriesTuning		1.3.6.1.4.1.89.29.8.8
OBJECT IDENTIFIER

rsMaxDspFrmEntries		1.3.6.1.4.1.89.29.8.8.1
Maximal number of entries in rsSdClientsTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxDspFrmEntriesAfterReset		1.3.6.1.4.1.89.29.8.8.2
Future maximal number of entries in rsSdClientsTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsMaxRoutingEntriesTuning		1.3.6.1.4.1.89.29.8.9
OBJECT IDENTIFIER

rsMaxRoutingEntries		1.3.6.1.4.1.89.29.8.9.1
Maximal number of entries in the routing table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsMaxRoutingEntriesAfterReset		1.3.6.1.4.1.89.29.8.9.2
Future maximal number of entries in the routing table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndApplications		1.3.6.1.4.1.89.35
OBJECT IDENTIFIER

rsServerDispatcher		1.3.6.1.4.1.89.35.1
OBJECT IDENTIFIER

rndMidLevelManagement		1.3.6.1.4.1.89.35.2
OBJECT IDENTIFIER

rndAlarmOptions		1.3.6.1.4.1.89.35.2.2
OBJECT IDENTIFIER

rndAlarmEnabling		1.3.6.1.4.1.89.35.2.2.1
Indicates whether alarms should be issued to the high-level NMS
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

rndAlarmInterval		1.3.6.1.4.1.89.35.2.2.2
Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndMonitoredElementsTable		1.3.6.1.4.1.89.35.2.3
The table of monitored elements of the network
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndMonitoredElementEntry

rndMonitoredElementEntry		1.3.6.1.4.1.89.35.2.3.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndMonitoredElementEntry

rndMonitoredElementAddress		1.3.6.1.4.1.89.35.2.3.1.1
The IP address of the monitored element
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rndMonitoredElementCommunity		1.3.6.1.4.1.89.35.2.3.1.2
The community of the monitored element
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

rndMonitoredElementLabel		1.3.6.1.4.1.89.35.2.3.1.3
The label assigned by the network manager to the monitored element
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

rndDefaultPollingInterval		1.3.6.1.4.1.89.35.2.3.1.4
The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndDefaultLogFile		1.3.6.1.4.1.89.35.2.3.1.5
The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rndMonitoredElementStatus		1.3.6.1.4.1.89.35.2.3.1.6
It is used to manage the monitored elements table and indicates the current monitoring status of an element.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rndMonitoringTable		1.3.6.1.4.1.89.35.2.4
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndMonitoringEntry

rndMonitoringEntry		1.3.6.1.4.1.89.35.2.4.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndMonitoringEntry

rndMonitoredElement		1.3.6.1.4.1.89.35.2.4.1.1
A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

rndMonitoredObjectInstanceLabel		1.3.6.1.4.1.89.35.2.4.1.2
The label assigned by the network manager to the monitored object instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

rndMonitoredObjectName		1.3.6.1.4.1.89.35.2.4.1.3
The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..20)

rndMonitoredObjectIdentifier		1.3.6.1.4.1.89.35.2.4.1.4
The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

rndMonitoredObjectInstance		1.3.6.1.4.1.89.35.2.4.1.5
The instance identifier (key) of the monitored object instance.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

rndMonitoredObjectSyntax		1.3.6.1.4.1.89.35.2.4.1.6
The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	integer(1), octet-string(2), ip-address(3), object-identifier(4)

rndMonitoringInterval		1.3.6.1.4.1.89.35.2.4.1.7
The period of time between two consecutive retrievals of the monitored object instance's value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndAlarmMaxTreshold		1.3.6.1.4.1.89.35.2.4.1.8
The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndAlarmMinTreshold		1.3.6.1.4.1.89.35.2.4.1.9
If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndMonitoringLogfile		1.3.6.1.4.1.89.35.2.4.1.10
The entire path of the file in which the results of the monitoring of this object instance should be recorded.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rndMonitoringEntryStatus		1.3.6.1.4.1.89.35.2.4.1.11
It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rndMibFilesTable		1.3.6.1.4.1.89.35.2.5
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndMibFileEntry

rndMibFileEntry		1.3.6.1.4.1.89.35.2.5.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndMibFileEntry

rndMibFileIndex		1.3.6.1.4.1.89.35.2.5.1.1
The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rndMibFilePath		1.3.6.1.4.1.89.35.2.5.1.2
The path of the MIB file in the MIB file server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rndMibFileRefresh		1.3.6.1.4.1.89.35.2.5.1.3
Indicates if the file should be fetched after setting this entry from the MIB file server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

rndMibFileEntryStatus		1.3.6.1.4.1.89.35.2.5.1.4
It is used to manage the MIB files table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rndHardwareConfiguration		1.3.6.1.4.1.89.35.2.6
Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rndEraseSimulatedConfiguration		1.3.6.1.4.1.89.35.2.7
eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	eraseSimulatedConfiguration(1), simulatedConfigurationPresent(2), simulatedConfigurationErased(3)

rndDeleteValuesTable		1.3.6.1.4.1.89.35.2.8
This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RndDeleteValuesEntry

rndDeleteValuesEntry		1.3.6.1.4.1.89.35.2.8.1
The row definition for the rndDeleteValuesTable table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RndDeleteValuesEntry

rndRowStatusVariableName		1.3.6.1.4.1.89.35.2.8.1.1
The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..80)

rndRowStatusObjectId		1.3.6.1.4.1.89.35.2.8.1.2
The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

rndRowDeleteValue		1.3.6.1.4.1.89.35.2.8.1.3
The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rndDeleteValueEntryStatus		1.3.6.1.4.1.89.35.2.8.1.4
It is used to delete an entry from this table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsIpZeroHopRouting		1.3.6.1.4.1.89.35.3
OBJECT IDENTIFIER

rsIpZhrGeneralStatus		1.3.6.1.4.1.89.35.3.1
This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on each IP interface through the rsIpZhrStatusTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsIpZhrAgingTimeout		1.3.6.1.4.1.89.35.3.2
This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out has expired is eligible for allocation to a different connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsIpZhrStatusTable		1.3.6.1.4.1.89.35.3.3
The administrative status of the ZHR feature per ip interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIpZhrStatusEntry

rsIpZhrStatusEntry		1.3.6.1.4.1.89.35.3.3.1
An entry in the ZHR status table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIpZhrStatusEntry

rsIpZhrStatusIpIntf		1.3.6.1.4.1.89.35.3.3.1.1
The Ip interface whose ZHR feature status is accessed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrAdminStatus		1.3.6.1.4.1.89.35.3.3.1.2
It is used to control whether ZHR will operate on the interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsIpZhrVirtAddressTable		1.3.6.1.4.1.89.35.3.4
The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIpZhrVirtAddressEntry

rsIpZhrVirtAddressEntry		1.3.6.1.4.1.89.35.3.4.1
An entry in the ZHR virtual IP addresses table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIpZhrVirtAddressEntry

rsIpZhrVirtAddressIpIntf		1.3.6.1.4.1.89.35.3.4.1.1
The Ip Interface to which the IP addresses in this entry are allocated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrVirtAddressTo		1.3.6.1.4.1.89.35.3.4.1.2
The last free IP address in the block.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrVirtAddressFrom		1.3.6.1.4.1.89.35.3.4.1.3
The first free IP address in the block.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsIpZhrVirtAddressStatus		1.3.6.1.4.1.89.35.3.4.1.4
It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsIpZhrConnectionsTable		1.3.6.1.4.1.89.35.3.5
Table of the currently active direct connections.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIpZhrConnectionEntry

rsIpZhrConnectionEntry		1.3.6.1.4.1.89.35.3.5.1
An entry in the ZHR Connection table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIpZhrConnectionEntry

rsIpZhrConnectionIpIntf		1.3.6.1.4.1.89.35.3.5.1.1
The IP Interface for which this direct connection was established.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrConnectionSrcIp		1.3.6.1.4.1.89.35.3.5.1.2
The source IP Address of this direct connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrConnectionDestIp		1.3.6.1.4.1.89.35.3.5.1.3
The destination IP Address of this direct connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrConnectionVirtualIp		1.3.6.1.4.1.89.35.3.5.1.4
The virtual IP address allocated for this direct connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsIpZhrConnectionType		1.3.6.1.4.1.89.35.3.5.1.5
The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used as destination by the source BEFORE its allocation, and therefore marked this connection as 'disabled' to prevent a future allocation of this virtual address to this source. static - established by user.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2), disabled(3)

rsIpZhrConnectionAge		1.3.6.1.4.1.89.35.3.5.1.6
The age of the connection in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsIpZhrConnectionStatus		1.3.6.1.4.1.89.35.3.5.1.7
It is used to manage the connections table. The supported actions will be active, createAndGo and destroy.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

routeTableOverflow		5
An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
TRAP-TYPE

resetRequired		10
This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
TRAP-TYPE

endTftp		12
This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE

abortTftp		13
This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE

startTftp		14
Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
TRAP-TYPE

ipxRipTblOverflow		36
This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE

ipxSapTblOverflow		37
This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE

facsAccessVoilation		49
This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
TRAP-TYPE

autoConfigurationCompleted		50
This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
TRAP-TYPE

forwardingTabOverflow		51
This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
TRAP-TYPE

errorsDuringInit		61
Tok_String
TRAP-TYPE

vlanDynPortAdded		66
Tok_String
TRAP-TYPE

vlanDynPortRemoved		67
Tok_String
TRAP-TYPE

rsSDclientsTableOverflow		68
This warning is generated when an overflow occurs in the clients table.
TRAP-TYPE

rsSDinactiveServer		69
This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
TRAP-TYPE

rsIpZhrConnectionsTableOverflow		70
The Zero Hop Routing connections Table has been overflown.
TRAP-TYPE

rsIpZhrReqStaticConnNotAccepted		71
The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
TRAP-TYPE

rsIpZhrVirtualIpAsSource		72
The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
TRAP-TYPE

rsIpZhrNotAllocVirtualIp		73
The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
TRAP-TYPE

rsSnmpSetRequestInSpecialCfgState		74
An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
TRAP-TYPE

rsWSDRedundancySwitch		141
Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
TRAP-TYPE

rsWSDServerStatTable		1.3.6.1.4.1.89.35.1.12
In this table the WSD collects statistics per servers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDServerStatEntry

rsWSDServerStatEntry		1.3.6.1.4.1.89.35.1.12.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDServerStatEntry

rsWSDSerStatName		1.3.6.1.4.1.89.35.1.12.1.1
This variable indicate the name assigned by the user to the serve.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..30)

rsWSDSerStatAttUsersNum		1.3.6.1.4.1.89.35.1.12.1.2
The total number of currently active users attached to this server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDSerStatPeakLoad		1.3.6.1.4.1.89.35.1.12.1.3
Maximal number of frames per second dispatched to server since last reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDSerStatFramesRate		1.3.6.1.4.1.89.35.1.12.1.4
Number of frames per second dispatched to server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDSerStatFramesLoad		1.3.6.1.4.1.89.35.1.12.1.5
Number of frames per second dispatched to server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rsWSDSerStatRecoveryTime		1.3.6.1.4.1.89.35.1.12.1.6
Number of seconds after server initialization during which ISD won't send any requests.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDSerStatWarmUpTime		1.3.6.1.4.1.89.35.1.12.1.7
Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDSerStatConnectionLimit		1.3.6.1.4.1.89.35.1.12.1.8
The maximal number of client sessions which can be opened on this sever.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDSerStatAdminStatus		1.3.6.1.4.1.89.35.1.12.1.9
Enable / Shutdown all the applications on this physical server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), shutdown(2)

rsWSDSerStatConnectionLimitReached		1.3.6.1.4.1.89.35.1.12.1.10
Connection limit reached flag.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDdummy2		1.3.6.1.4.1.89.35.1.12.2
Dummy variable for stopping getnext.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wsdRedundTable		1.3.6.1.4.1.89.35.1.16
List of Farm IP addresses backed up by this router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsdRedundEntry

wsdRedundEntry		1.3.6.1.4.1.89.35.1.16.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WsdRedundEntry

wsdRedundFarmAddr		1.3.6.1.4.1.89.35.1.16.1.1
The Farm Virtual Ip address on which the redundancy feature operates.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

wsdRedundMainWsdAddr		1.3.6.1.4.1.89.35.1.16.1.2
The Ip address of the polled main wsd.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

wsdRedundOperStatus		1.3.6.1.4.1.89.35.1.16.1.3
If active, the main wsd is considered inactive and the IP interface operates as its backup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

wsdRedundPollInterval		1.3.6.1.4.1.89.35.1.16.1.4
Polling interval for the main wsd (in seconds). If 0 the wsd is not polled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wsdRedundTimeout		1.3.6.1.4.1.89.35.1.16.1.5
Interval in seconds during which the backed-up wsd must signal. If it does not signal, it is considered inactive and the IP interface starts operating as backup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wsdRedundStatus		1.3.6.1.4.1.89.35.1.16.1.6
Entry status
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)

rsWSDdummy5		1.3.6.1.4.1.89.35.1.16.2
Dummy variable for stopping getnext.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDNewEntryOnSourcePort		1.3.6.1.4.1.89.35.1.19
Check source port and if different open new client entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDSelectServerOnSourcePort		1.3.6.1.4.1.89.35.1.20
Check source port and if different select a new server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDRedundancyMode		1.3.6.1.4.1.89.35.1.21
Dose some WSD backup me.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsNsdMode		1.3.6.1.4.1.89.35.1.22
The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients directly to servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	slowMode(1), fastMode(2)

rsNsdWINSAddr		1.3.6.1.4.1.89.35.1.23
NetBIOS Name Server IP Address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsWSDSyslogStatus		1.3.6.1.4.1.89.35.1.26
Enable/Disable syslog message sending to remote station.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDSyslogAddress		1.3.6.1.4.1.89.35.1.27
The IP Address of the syslog station.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsWSDNTCheckTable		1.3.6.1.4.1.89.35.1.28
In this table the WSD collects NT statistics per servers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDNTCheckEntry

rsWSDNTCheckEntry		1.3.6.1.4.1.89.35.1.28.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDNTCheckEntry

rsWSDNTSerialNum		1.3.6.1.4.1.89.35.1.28.1.1
The serial number of the algorithm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDNTFrequentCheckPeriod		1.3.6.1.4.1.89.35.1.28.1.2
The period for getting the frequent NT variables.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTOpenSessionsWeight		1.3.6.1.4.1.89.35.1.28.1.3
The weight for currently open sessions consideration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTIncomingTrafficWeight		1.3.6.1.4.1.89.35.1.28.1.4
The weight for incoming traffic consideration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTOutgoingTrafficWeight		1.3.6.1.4.1.89.35.1.28.1.5
The weight for outgoing traffic consideration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTRegularCheckPeriod		1.3.6.1.4.1.89.35.1.28.1.6
The period for getting the regular NT variables.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTAvResponseWeight		1.3.6.1.4.1.89.35.1.28.1.7
The weight for average response time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTUsersLimitWeight		1.3.6.1.4.1.89.35.1.28.1.8
The weight for the users limit on the server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTTCPLimitWeight		1.3.6.1.4.1.89.35.1.28.1.9
The weight for the TCP connections limit on the server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTRetries		1.3.6.1.4.1.89.35.1.28.1.10
The number of retries before issuing a trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTCommunity		1.3.6.1.4.1.89.35.1.28.1.11
The SNMP community name with which we access the servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

rsWSDdummy8		1.3.6.1.4.1.89.35.1.28.2
Dummy variable for stopping getnext.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDPrivateCheckTable		1.3.6.1.4.1.89.35.1.29
In this table the WSD collects private statistics per server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDPrivateCheckEntry

rsWSDPrivateCheckEntry		1.3.6.1.4.1.89.35.1.29.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDPrivateCheckEntry

rsWSDPrivateSerialNum		1.3.6.1.4.1.89.35.1.29.1.1
The serial number of the algorithm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDPrivateSpecialCheckPeriod		1.3.6.1.4.1.89.35.1.29.1.2
The period for getting the private variables.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDPrivateExtraVar1ID		1.3.6.1.4.1.89.35.1.29.1.3
This MIB variable will be retrieved from the server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

rsWSDPrivateExtraVar1Weight		1.3.6.1.4.1.89.35.1.29.1.4
The weight for variable number 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDPrivateExtraVar2ID		1.3.6.1.4.1.89.35.1.29.1.5
This MIB variable will be retrieved from the server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

rsWSDPrivateExtraVar2Weight		1.3.6.1.4.1.89.35.1.29.1.6
The weight for variable number 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDPrivateRetries		1.3.6.1.4.1.89.35.1.29.1.7
The number of retries before issuing a trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDPrivateCommunity		1.3.6.1.4.1.89.35.1.29.1.8
The SNMP community name with which we access the servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..20)

rsWSDPrivateExtraVar1Mode		1.3.6.1.4.1.89.35.1.29.1.9
Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ascending(1), descending(2)

rsWSDPrivateExtraVar2Mode		1.3.6.1.4.1.89.35.1.29.1.10
Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ascending(1), descending(2)

rsWSDdummy9		1.3.6.1.4.1.89.35.1.29.2
Dummy variable for stopping getnext.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDDNSResolution		1.3.6.1.4.1.89.35.1.31
Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), proximity(3)

rsWSDUserPassword		1.3.6.1.4.1.89.35.1.33
Software download user provided password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..8)

rsWSDUserVersion		1.3.6.1.4.1.89.35.1.34
Software download user provided version.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..6)

rsWSDNatStatus		1.3.6.1.4.1.89.35.1.35
Enable/Disable NAT - to hide the address of the server in messages send .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDRedundancyTakeback		1.3.6.1.4.1.89.35.1.37
Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	automatic(1), manual(2)

rsMLB		1.3.6.1.4.1.89.35.1.38
OBJECT IDENTIFIER

rsCSD		1.3.6.1.4.1.89.35.1.39
OBJECT IDENTIFIER

rsNWSD		1.3.6.1.4.1.89.35.1.40
OBJECT IDENTIFIER

rsWSDIfTable		1.3.6.1.4.1.89.35.1.41
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDIfEntry

rsWSDIfEntry		1.3.6.1.4.1.89.35.1.41.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDIfEntry

rsWSDIfIndex		1.3.6.1.4.1.89.35.1.41.1.1
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDIfBoardNum		1.3.6.1.4.1.89.35.1.41.1.2
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDIfNetAddress		1.3.6.1.4.1.89.35.1.41.1.3
The IP address of the interface defined by the particular value of rsWSDIfIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	NetworkAddress

rsWSDIfStatus		1.3.6.1.4.1.89.35.1.41.1.4
The current status of the interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), okSingleBrg(2), okMultiBrg(3), connctFault(4), rxFault(5), txFault(6), channelLoopback(7), rxClockFault(8), t1Alarm(9)

rsWSDIfClockType		1.3.6.1.4.1.89.35.1.41.1.5
rsWSDIfClockType defines the type of clock each interface uses: internal or external.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	external(1), internal(2), t1(3), g703(4)

rsWSDIfBaudRate		1.3.6.1.4.1.89.35.1.41.1.6
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDIfCost		1.3.6.1.4.1.89.35.1.41.1.7
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDIfCompression		1.3.6.1.4.1.89.35.1.41.1.8
Defines whether data compression is enabled or disabled for the interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDIfCompressionStatus		1.3.6.1.4.1.89.35.1.41.1.9
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-inserted(1), active(2), not-active(3), disable(4)

rsWSDIfCompressionRate		1.3.6.1.4.1.89.35.1.41.1.10
Percentage of compression. This variable applies only if rndCompressionStatus is active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDIfLATCompression		1.3.6.1.4.1.89.35.1.41.1.11
Enable/Disable the LAT Compression.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDIfCompressionType		1.3.6.1.4.1.89.35.1.41.1.12
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), lowSpeed(2), highSpeed(3)

rsWSDIfFilterMode		1.3.6.1.4.1.89.35.1.41.1.13
This parameter indicates the type of filtering in the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	destinationOnly(1), sourceAndDestination(2), none(3)

rsWSDIfChannelType		1.3.6.1.4.1.89.35.1.41.1.14
The type of the WAN channel
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wanChannel(1), ogRanPort(2), routerToBridge(3), spsFramRelay(4), dialBackup(5), snar(6), lan(7), spsX25(8), frameRelay1490(9), frameRelay1490CAR(10), frameRelayCAR(11), ppp(12)

rsWSDIfBridge		1.3.6.1.4.1.89.35.1.41.1.15
This variable indicates whether this interface forward Layer II pakages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDHighPriorityIf		1.3.6.1.4.1.89.35.1.41.1.16
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDWanHeader		1.3.6.1.4.1.89.35.1.41.1.17
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	regular(1), short(2)

rsWSDDuplexMode		1.3.6.1.4.1.89.35.1.41.1.18
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	half(1), full(2), auto(3)

rsWSDClientMirrorPercentage		1.3.6.1.4.1.89.35.1.42
The percent of client entries to back up.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

rsWSDMirrorStatus		1.3.6.1.4.1.89.35.1.43
Enable/Disable mirroring. This enables the allocation of the mirror tables.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDMirrorProtocolMode		1.3.6.1.4.1.89.35.1.44
Enable/Disable of the mirror protocol. That is whether to send the mirror messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDApplicationMirrorTable		1.3.6.1.4.1.89.35.1.45
Table containing the list of active mirror entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDApplicationMirrorEntry

rsWSDApplicationMirrorEntry		1.3.6.1.4.1.89.35.1.45.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDApplicationMirrorEntry

rsWSDMirrorActiveAddress		1.3.6.1.4.1.89.35.1.45.1.1
The IP address of the active device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

rsWSDMirrorActiveStatus		1.3.6.1.4.1.89.35.1.45.1.2
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)

rsWSDdummy11		1.3.6.1.4.1.89.35.1.45.2
Dummy variable for stopping getnext.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDClientMirrorPollingTime		1.3.6.1.4.1.89.35.1.46
The polling time for sending the client entries.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsPlatformIdentifier		1.3.6.1.4.1.89.35.1.47
An administratively-assigned value that identifies managed device platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	vgate(1), vgfe(2), onecpu(3), onecpuh(4), boomer(5), cougar(6)

rsConfigurationIdentifier		1.3.6.1.4.1.89.35.1.48
An administratively-assigned value that identifies managed device configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	twoPorts(1), fourPorts(2), fixed-2(3), fixed-8(4), fixed-8-2(5), fixed-16-5(6), chassis(7), fixed-7(8)

rsSWPasswordStatus		1.3.6.1.4.1.89.35.1.49
Software download password status.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	statusUnset(1), passwordOK(2), wrongPassword(3)

rsWSDFlashSize		1.3.6.1.4.1.89.35.1.50
Flash Size
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDDRAMSize		1.3.6.1.4.1.89.35.1.51
DRAM Size
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDVLANRedundOperStatus		1.3.6.1.4.1.89.35.1.52
Enable/Disable the backup redundant device for a VLAN.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDResourceUtilization		1.3.6.1.4.1.89.35.1.53
Resource Utilization of WSD. Considers network utilization and internal CPU utilization
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

rsWSDRSResourceUtilization		1.3.6.1.4.1.89.35.1.54
Resource Utilization of internal CPU utilization
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

rsWSDREResourceUtilization		1.3.6.1.4.1.89.35.1.55
Resource Utilization of network utilization
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

rsWSDBuildNumber		1.3.6.1.4.1.89.35.1.56
Build number
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

rsWSDUseOneTrap		1.3.6.1.4.1.89.35.1.57
When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDSecuredComm		1.3.6.1.4.1.89.35.1.58
OBJECT IDENTIFIER

rsWSDSCProtcolsTable		1.3.6.1.4.1.89.35.1.58.1
Table containing the list of ports/protocols for secured (encrypted) communication between the device and the management station or other device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDSCProtcolsEntry

rsWSDSCProtcolsEntry		1.3.6.1.4.1.89.35.1.58.1.1
The row definition for protocol table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDSCProtcolsEntry

rsWSDSCProtocol		1.3.6.1.4.1.89.35.1.58.1.1.1
The protocol that should work in secured mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	snmp(1), tftp(2), lrp(3), prp(4), srp(5), mirror(6)

rsWSDSCProtocolStatus		1.3.6.1.4.1.89.35.1.58.1.1.2
The status (secured or not secured) of the protocol.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	encrypted(1), notEncrypted(2)

rsWSDSNMPPortsTable		1.3.6.1.4.1.89.35.1.59
The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDSNMPPortsEntry

rsWSDSNMPPortsEntry		1.3.6.1.4.1.89.35.1.59.1
Row definition for the table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDSNMPPortsEntry

rsWSDSNMPPhysicalPortNumber		1.3.6.1.4.1.89.35.1.59.1.1
Physical port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDSNMPPhysicalPortState		1.3.6.1.4.1.89.35.1.59.1.2
enable - accept SNMP operations on the physical port. disable - ignore SNMP opertaions on the physical port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsBWM		1.3.6.1.4.1.89.35.1.60
OBJECT IDENTIFIER

rsWSDTelnetUserTable		1.3.6.1.4.1.89.35.1.61
A table containing the users authorized to use TELNET.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDTelnetUserEntry

rsWSDTelnetUserEntry		1.3.6.1.4.1.89.35.1.61.1
Information about a particular Telnet user.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDTelnetUserEntry

rsWSDTelnetUserName		1.3.6.1.4.1.89.35.1.61.1.1
User Name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

rsWSDTelnetUserPassword		1.3.6.1.4.1.89.35.1.61.1.2
User password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

rsWSDTelnetUserEAddr		1.3.6.1.4.1.89.35.1.61.1.3
User email address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

rsWSDTelnetUserSeverity		1.3.6.1.4.1.89.35.1.61.1.4
minimum failure severity to be notified by mail
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), info(2), warning(3), error(4), fatal(5)

rsWSDTelnetUserStatus		1.3.6.1.4.1.89.35.1.61.1.5
Entry status
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsWSDTelnetUserGroup		1.3.6.1.4.1.89.35.1.61.1.6
The group to which that user belongs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

rsWSDTelnetParams		1.3.6.1.4.1.89.35.1.62
OBJECT IDENTIFIER

rsWSDTelnetPort		1.3.6.1.4.1.89.35.1.62.1
The Telnet Server Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDTelnetStatus		1.3.6.1.4.1.89.35.1.62.2
Telnet Status. Enable/Disable Telnet Terminal operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsSSD		1.3.6.1.4.1.89.35.1.63
OBJECT IDENTIFIER

rsSSDvirtualLan		1.3.6.1.4.1.89.35.1.63.1
OBJECT IDENTIFIER

rsSSDvirtualLanTable		1.3.6.1.4.1.89.35.1.63.1.1
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsSSDvirtualLanEntry

rsSSDvirtualLanEntry		1.3.6.1.4.1.89.35.1.63.1.1.1
A list of information for each virtual LAN.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsSSDvirtualLanEntry

rsSSDvlIfIndex		1.3.6.1.4.1.89.35.1.63.1.1.1.1
An logical interface number, corresponded this VL
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsSSDvlProto		1.3.6.1.4.1.89.35.1.63.1.1.1.2
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type. swVlan: This is a Bridging and routing VL (switch VL) , Bridging is done on the Hertz/Uhaul level , and the RS route between nodes on different virtual LANs and/or between nodes of the switch VL.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), ip(2), ipmulticast(3), ipxRaw(4), ipxET(5), ipxLLC(6), ipxSNAP(7), decNET(8), decLAT(9), netBios(10), appleTalk(11), xns(12), sna(13), userDefined(14), swVlan(15)

rsSSDvlAutoConfigEnable		1.3.6.1.4.1.89.35.1.63.1.1.1.3
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rsSSDvlStatus		1.3.6.1.4.1.89.35.1.63.1.1.1.4
It is used to delete an entry
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsSSDvlType		1.3.6.1.4.1.89.35.1.63.1.1.1.5
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs. specSwitch - for switches that support VLANs as a set of ports. This VLAN type is for switching when packets do not have to get to the cpu except when an IP interface defined on the VLAN. In Switch VLAN the cpu don't interfere in the bridging action this is done on the Herzts level (L2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	regular(1), specBroadcast(2), specArpReq(3), specBroadcastAndUnicast(4), specArpReqAndUnicast(5), specSwitch(6)

rsSSDvlTag		1.3.6.1.4.1.89.35.1.63.1.1.1.6
A VLAN tag, used for this VLAN on tagged ports. If it's 0, then a value of (rsSSDvlIfIndex-100000+1) is used
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsSSDvlPriority		1.3.6.1.4.1.89.35.1.63.1.1.1.7
A user priority, used for this VLAN on tagged ports.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	low(1), high(2)

rsSSDvirtualLanPortsTable		1.3.6.1.4.1.89.35.1.63.1.2
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsSSDvirtualLanPortEntry

rsSSDvirtualLanPortEntry		1.3.6.1.4.1.89.35.1.63.1.2.1
A entry of this table specifies a VL and a port belonging to it
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsSSDvirtualLanPortEntry

rsSSDvLIfIndex		1.3.6.1.4.1.89.35.1.63.1.2.1.1
An logical interface number, corresponding to this VL
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsSSDvLPortIfIndex		1.3.6.1.4.1.89.35.1.63.1.2.1.2
A physical port belonging to the VL specified by rsSSDvlIfIndex.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsSSDvLPortType		1.3.6.1.4.1.89.35.1.63.1.2.1.3
static means configured by user dynamic means autoconfigured by the RS
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2)

rsSSDvLPortStatus		1.3.6.1.4.1.89.35.1.63.1.2.1.4
It is used to delete an entry
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsSSDvLPortTag		1.3.6.1.4.1.89.35.1.63.1.2.1.5
This variable indicate if the port is tagged or untagged
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	untag(1), tag(2)

rsWSDThresholdWarnings		1.3.6.1.4.1.89.35.1.64
OBJECT IDENTIFIER

rsWSDThreshTrapFloodDelay		1.3.6.1.4.1.89.35.1.64.1
This variable defines how far (in seconds) will 2 Threshold Warning Traps be spaced for the same Threshold Warning Type. Default = 0, i.e. DISABLED
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3600

rsWSDCriticalTrapFloodDelay		1.3.6.1.4.1.89.35.1.64.2
This variable defines how far (in seconds) will 2 Critical Warning Traps be spaced (of any type). Default = 20 seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..3600

rsIDS		1.3.6.1.4.1.89.35.1.65
OBJECT IDENTIFIER

rsWSDLicense		1.3.6.1.4.1.89.35.1.66
The new licence for the device
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..80)

rsErrMailParams		1.3.6.1.4.1.89.35.1.67
OBJECT IDENTIFIER

rsErrMailEnable		1.3.6.1.4.1.89.35.1.67.1
Send email on errors enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsErrMailGateway		1.3.6.1.4.1.89.35.1.67.2
primary SMTP gateway for error mail
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsErrMailSrcAddress		1.3.6.1.4.1.89.35.1.67.3
source address to be used by device for outgoing mail
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

rsWSDWebParams		1.3.6.1.4.1.89.35.1.68
OBJECT IDENTIFIER

rsWSDWebPort		1.3.6.1.4.1.89.35.1.68.1
The Web Server Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDWebStatus		1.3.6.1.4.1.89.35.1.68.2
Web Status. Enable/Disable Web operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDWebHelpLocation		1.3.6.1.4.1.89.35.1.68.3
Location of the help files directory.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

rsWSDSysParams		1.3.6.1.4.1.89.35.1.69
OBJECT IDENTIFIER

rsWSDSysFlashSize		1.3.6.1.4.1.89.35.1.69.1
The flash size of the device in mega bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDSysUpTime		1.3.6.1.4.1.89.35.1.69.2
Time since the system was last reinitialized in a convenient format.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

rsWSDSysManagedTime		1.3.6.1.4.1.89.35.1.69.3
The time will be sent in the format hh:mm:ss
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

rsWSDSysManagedDate		1.3.6.1.4.1.89.35.1.69.4
The date will be sent in the format dd/mm/yyyy
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

rsWSDLicenseID		1.3.6.1.4.1.89.35.1.70
License ID used for license downgrade
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..80)

rsWSDSendFakeArp		1.3.6.1.4.1.89.35.1.71
Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to service.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDNTP		1.3.6.1.4.1.89.35.1.72
OBJECT IDENTIFIER

rsWSDNTPServerAddr		1.3.6.1.4.1.89.35.1.72.1
Server IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsWSDNTPInterval		1.3.6.1.4.1.89.35.1.72.2
Time update interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDNTPStatus		1.3.6.1.4.1.89.35.1.72.3
Enable status for NTP synchronization.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDNTPTimeZone		1.3.6.1.4.1.89.35.1.72.4
Offset from Greenwich time (format hh:mm).
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..6)

rsWSDNTPPort		1.3.6.1.4.1.89.35.1.72.5
A UDP Port number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsStatistics		1.3.6.1.4.1.89.35.1.73
OBJECT IDENTIFIER

rsPhysPortMirrorTable		1.3.6.1.4.1.89.35.1.74
Table containing the list of copy ports
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsPhysPortMirrorEntry

rsPhysPortMirrorEntry		1.3.6.1.4.1.89.35.1.74.1
The row definition for physical copy port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsPhysPortMirrorEntry

rsPhysPortMirrorSrcInf		1.3.6.1.4.1.89.35.1.74.1.1
The port under sniffing
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsPhysPortMirrorDstPort		1.3.6.1.4.1.89.35.1.74.1.2
The destination port - the target sniffer port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsPhysPortMirrorRxTx		1.3.6.1.4.1.89.35.1.74.1.3
Copy Rx/Tx traffic to the copy port .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	copyRxTx(1), copyRxOnly(2), copyTxOnly(3)

rsPhysPortMirrorRxBroadCast		1.3.6.1.4.1.89.35.1.74.1.4
The copy will include broadcast/unknown or not
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsPhysPortMirrorStatus		1.3.6.1.4.1.89.35.1.74.1.5
Used to delete an entry of this table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsPhysPortMirrorBackupDstPort		1.3.6.1.4.1.89.35.1.74.1.6
The destination port - the target sniffer port
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsPhysPortMirrorDstStatus		1.3.6.1.4.1.89.35.1.74.1.7
The status of the dest-port according to the health check: active - the port is ok and can be used as a destination port for copy-port portDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP checkIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently checkIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), portDown(2), checkIDSFail(3), checkIDSFailAndPortDown(4)

rsPhysPortMirrorBackupStatus		1.3.6.1.4.1.89.35.1.74.1.8
The status of the backup-port according to the health check: Active - the port is ok and can be used as a destination port for copy-port PortDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP CheckIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently CheckIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN None - for the case there is no defined backup port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), portDown(2), checkIDSFail(3), checkIDSFailAndPortDown(4), none(5)

rsPhysPortMirrorActiveDstPort		1.3.6.1.4.1.89.35.1.74.1.9
The active dest-port at a certain time, if it is the dest-port or the backup-port or none of them.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dstPort(1), backupPort(2), none(3)

rsCP		1.3.6.1.4.1.89.35.1.75
OBJECT IDENTIFIER

rsVWSD		1.3.6.1.4.1.89.35.1.76
OBJECT IDENTIFIER

rsVWSDDataPermissionsTable		1.3.6.1.4.1.89.35.1.76.1
Table containing the list of data items to which Farm administrators of the virtual wsd has permissions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsVWSDDataPermissionsTableEntry

rsVWSDDataPermissionsTableEntry		1.3.6.1.4.1.89.35.1.76.1.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsVWSDDataPermissionsTableEntry

rsVWSDUserGroup		1.3.6.1.4.1.89.35.1.76.1.1.1
The Group of users for whom data permission is given.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..30)

rsVWSDDataType		1.3.6.1.4.1.89.35.1.76.1.1.2
Holds a string that identifies the table of the index by which the data filtering is done.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..80)

rsVWSDDataItems		1.3.6.1.4.1.89.35.1.76.1.1.3
The Value(s) of the index column for the data item to which permission is set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..80)

rsVWSDDataStatus		1.3.6.1.4.1.89.35.1.76.1.1.4
The row status for the table
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsWSDManagementPorts		1.3.6.1.4.1.89.35.1.77
The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, and the rest of the ports will be used for sniffing. switch implies the regular functionality of the device (router or VLAN). promiscuous will have static port mappings for forwarding.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	outOfPath(1), switch(2), promiscuous(3)

rsWSDManagementPortsTable		1.3.6.1.4.1.89.35.1.78
Table containing the operation of each port..
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDManagementPortsEntry

rsWSDManagementPortsEntry		1.3.6.1.4.1.89.35.1.78.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDManagementPortsEntry

rsWSDPortIndex		1.3.6.1.4.1.89.35.1.78.1.1
The index of the physical ports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDPortOperation		1.3.6.1.4.1.89.35.1.78.1.2
The operation of the particular port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	management(1), sniffer(2)

rsCCK		1.3.6.1.4.1.89.35.1.79
OBJECT IDENTIFIER

rsWSDSshParams		1.3.6.1.4.1.89.35.1.80
OBJECT IDENTIFIER

rsWSDSshPort		1.3.6.1.4.1.89.35.1.80.1
The SSH Server Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDSshStatus		1.3.6.1.4.1.89.35.1.80.2
SSH Status. Enable/Disable SSH operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDHttpsParams		1.3.6.1.4.1.89.35.1.81
OBJECT IDENTIFIER

rsWSDHttpsPort		1.3.6.1.4.1.89.35.1.81.1
The Https Server Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDHttpsStatus		1.3.6.1.4.1.89.35.1.81.2
Https Status. Enable/Disable Https operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rsWSDStaticForwardingTable		1.3.6.1.4.1.89.35.1.82
Table containing the static fowarding configration.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsWSDStaticForwardingEntry

rsWSDStaticForwardingEntry		1.3.6.1.4.1.89.35.1.82.1
The row definition for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsWSDStaticForwardingEntry

rsWSDStaticSourcePort		1.3.6.1.4.1.89.35.1.82.1.1
The index of the source port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsWSDStaticDestinationPort		1.3.6.1.4.1.89.35.1.82.1.2
The destination port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsWSDStaticPortOperation		1.3.6.1.4.1.89.35.1.82.1.3
The operation for the specific port. process implies that the packets will be processed (analyzed, filtered etc.) prior to being forwarded. forward implies that the packets will be forwarded.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	process(1), forward(2)

rsWSDStaticStatus		1.3.6.1.4.1.89.35.1.82.1.4
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsRadiusServer		1.3.6.1.4.1.89.35.1.83
OBJECT IDENTIFIER

rsRadiusMainServerAddr		1.3.6.1.4.1.89.35.1.83.1
The IP Address of the radius main server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsRadiusMainServerPort		1.3.6.1.4.1.89.35.1.83.2
The port on which the radius main server listens
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsRadiusMainServerSecret		1.3.6.1.4.1.89.35.1.83.3
The key with which the user's password is encrypted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..20)

rsRadiusBackupServerAddr		1.3.6.1.4.1.89.35.1.83.4
The IP Address of the backup radius server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rsRadiusBackupServerPort		1.3.6.1.4.1.89.35.1.83.5
The port on which the radius backup server listens
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rsRadiusBackupServerSecret		1.3.6.1.4.1.89.35.1.83.6
The key with which the user's password is encrypted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..20)

rsAuthenticationMethod		1.3.6.1.4.1.89.35.1.83.7
Radius authentication method.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	userTable(1), radius(2), combined(3)

rsRadiusServerTimeout		1.3.6.1.4.1.89.35.1.83.8
Number of seconds to wait for reply from the radius server before retransmitting the request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

rsRadiusServerRetries		1.3.6.1.4.1.89.35.1.83.9
Minimal number of unanswered request attempts before considering the radius server disconnected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..5

rsIfTable		1.3.6.1.4.1.89.35.1.84
Device physical interface table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RsIfEntry

rsIfEntry		1.3.6.1.4.1.89.35.1.84.1
The row definition for this table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RsIfEntry

rsIfIndex		1.3.6.1.4.1.89.35.1.84.1.1
interface's index
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsIfSpeed		1.3.6.1.4.1.89.35.1.84.1.2
interface's speed
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	eth10(1), fe100(2), ge1000(3)

rsIfDuplex		1.3.6.1.4.1.89.35.1.84.1.3
interface's duplex
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	half(1), full(2)

rsIfAutoNegotiate		1.3.6.1.4.1.89.35.1.84.1.4
interface's autonegotiation status
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

rsIfRowStatus		1.3.6.1.4.1.89.35.1.84.1.5
interface's rowstatus
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rsWSDDeviceOperationMode		1.3.6.1.4.1.89.35.1.85
Device operation mode: redirection (load balancing) or static forwarding (IDS, BWM).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	trafficRedirection(1), staticForwarding(2)

rsWSDVersionStatus		1.3.6.1.4.1.89.35.1.86
Indicates whether the current version is closed or still open (under development).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	open(1), final(2)

rsWSDConnectionLimitReached		1
This warning is generated when the users connection limit of an application or a physical server is reached.
TRAP-TYPE

rsWSDReadyForShutDown		2
This warning is generated when all the clients sessions of an application or a physical server are finished and so, the application or server are ready to be shut down.
TRAP-TYPE

rsWSDIllegalReport		3
This warning is generated when an LRP message arrives with illegal information.
TRAP-TYPE

rsWSDRemoteWSDUnavailable		4
This warning is generated when a remote WSD is in full capacity, not in service or disabled. This server is then unavailable
TRAP-TYPE

rsWSDCapacityLimitReached		5
This warning is generated when WSD capacity limit is reached.
TRAP-TYPE

rsWSDStatusMonitoring		6
This warning is generated for unavailable SNMP parameter from a server.
TRAP-TYPE

rsWSDWrongPassword		7
This warning is generated when a wrong software download password is provided.
TRAP-TYPE

rsWSDInternalTableOverflow		8
This warning is generated when there are no more free entries in the table.
TRAP-TYPE

rsWSDServerUp		9
This informational trap is sent when a server correctly responds to a connectivity check for the first time.
TRAP-TYPE

rsWSDPoliciesUpdated		10
This informational trap is sent when the rule policies are updated.
TRAP-TYPE

rsWSDIntrusionDetected		11
This informational trap is sent when an intrusion is detected.
TRAP-TYPE