RADLAN-vlanVoice-MIB

File: RADLAN-vlanVoice-MIB.mib (14971 bytes)

Imported modules

RADLAN-vlan-MIB SNMPv2-TC IF-MIB
SNMPv2-SMI Q-BRIDGE-MIB RADLAN-MIB

Imported symbols

vlan TruthValue RowStatus
MacAddress DisplayString ifIndex
MODULE-IDENTITY OBJECT-TYPE VlanIndex
VlanPriority

Defined Types

VlanVoiceUcDeviceEntry  
SEQUENCE    
  vlanVoiceUcDeviceType INTEGER default(0), static(1), uc(2)
  vlanVoiceUcDeviceMacAddress MacAddress
  vlanVoiceUcDeviceInterface INTEGER
  vlanVoiceUcDeviceVid INTEGER 1..4094
  vlanVoiceUcDeviceVpt INTEGER 0..7
  vlanVoiceUcDeviceDscp INTEGER 0..63
  vlanVoiceUcDeviceIsBest TruthValue

VlanVoiceOUIBasedEntry  
SEQUENCE    
  vlanVoiceOUIBasedPrefix OCTET STRING
  vlanVoiceOUIBasedDescription DisplayString
  vlanVoiceOUIBasedEntryRowStatus RowStatus

VlanVoiceOUIBasedPortEntry  
SEQUENCE    
  vlanVoiceOUIBasedPortEnable TruthValue
  vlanVoiceOUIBasedPortVlanIndex VlanIndex
  vlanVoiceOUIBasedPortSecure TruthValue
  vlanVoiceOUIBasedPortCurrentMembership INTEGER active(1), notActive(2)
  vlanVoiceOUIBasedPortQosMode INTEGER src(1), all(2)

Defined Values

vlanVoice 1.3.6.1.4.1.89.48.54
The private MIB module definition for voice vlan support in Marvell devices.
MODULE-IDENTITY    

vlanVoiceAdminState 1.3.6.1.4.1.89.48.54.6
administrative voice vlan status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), auto-enabled(1), auto-triggered(2), oui-enabled(3)  

vlanVoiceOperState 1.3.6.1.4.1.89.48.54.7
operational voice vlan status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), auto-enabled(1), auto-triggered(2), oui-enabled(3)  

vlanVoiceAdminVid 1.3.6.1.4.1.89.48.54.8
1-4094 actual vlan (must exist in dot1qvlan static table)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

vlanVoiceOperVid 1.3.6.1.4.1.89.48.54.9
operational Voice Vlan ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

vlanVoiceUcDeviceTable 1.3.6.1.4.1.89.48.54.10
A table containing static default and UC directly connected to device configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanVoiceUcDeviceEntry

vlanVoiceUcDeviceEntry 1.3.6.1.4.1.89.48.54.10.1
Static and dynamic per port information for a voice VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanVoiceUcDeviceEntry  

vlanVoiceUcDeviceType 1.3.6.1.4.1.89.48.54.10.1.1
type of entry
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), static(1), uc(2)  

vlanVoiceUcDeviceMacAddress 1.3.6.1.4.1.89.48.54.10.1.2
Mac address of UC
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vlanVoiceUcDeviceInterface 1.3.6.1.4.1.89.48.54.10.1.3
Mac interface on which UC is connected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanVoiceUcDeviceVid 1.3.6.1.4.1.89.48.54.10.1.4
The Voice Vlan ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

vlanVoiceUcDeviceVpt 1.3.6.1.4.1.89.48.54.10.1.5
The entry VPT
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

vlanVoiceUcDeviceDscp 1.3.6.1.4.1.89.48.54.10.1.6
The entry DSCP value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

vlanVoiceUcDeviceIsBest 1.3.6.1.4.1.89.48.54.10.1.7
Indicates whether this entry is used as best local configuration
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vlanVoiceAuto 1.3.6.1.4.1.89.48.54.11
OBJECT IDENTIFIER    

vlanVoiceAutoAdmin 1.3.6.1.4.1.89.48.54.11.1
OBJECT IDENTIFIER    

vlanVoiceAutoAdminVpt 1.3.6.1.4.1.89.48.54.11.1.1
user configured VPT for Voice Vlan operation
Status: current Access: read-write
OBJECT-TYPE    
  VlanPriority  

vlanVoiceAutoAdminDscp 1.3.6.1.4.1.89.48.54.11.1.2
user configured DSCP for Voice Vlan operation
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

vlanVoiceAutoOper 1.3.6.1.4.1.89.48.54.11.2
OBJECT IDENTIFIER    

vlanVoiceAutoOperVpt 1.3.6.1.4.1.89.48.54.11.2.1
operational VPT for Voice Vlan operation
Status: current Access: read-only
OBJECT-TYPE    
  VlanPriority  

vlanVoiceAutoOperDscp 1.3.6.1.4.1.89.48.54.11.2.2
user configured DSCP for Voice Vlan operation
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

vlanVoiceAutoOperSource 1.3.6.1.4.1.89.48.54.11.2.3
The Mac address of the switch by which we've selected the VVID
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vlanVoiceAutoOperPriority 1.3.6.1.4.1.89.48.54.11.2.4
The reason for which Voice Vlan ID was selected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER staticActive(0), staticInActive(1), ucActive(2), ucInActive(3), default(6), disabled(10)  

vlanVoiceAutoRefresh 1.3.6.1.4.1.89.48.54.11.3
By setting the MIB to True, VSDP refresh will be executed.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanVoiceAutoAgreedVlanLastChange 1.3.6.1.4.1.89.48.54.11.4
date format is DDMMYYHHMMSS
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(12)  

vlanVoiceOUIBased 1.3.6.1.4.1.89.48.54.12
OBJECT IDENTIFIER    

vlanVoiceOUIBasedAdminPriority 1.3.6.1.4.1.89.48.54.12.1
An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  VlanPriority  

vlanVoiceOUIBasedAdminRemark 1.3.6.1.4.1.89.48.54.12.2
Remark VPT on tagged frames egress the voice vlan according. to priority true.false
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanVoiceOUIBasedSetToDefault 1.3.6.1.4.1.89.48.54.12.3
The vlanVoiceOUIBasedSetToDefault indicates that vlanVoiceOUIBasedTable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUIBasedTable should be previously deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanVoiceOUIBasedTable 1.3.6.1.4.1.89.48.54.12.4
A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanVoiceOUIBasedEntry

vlanVoiceOUIBasedEntry 1.3.6.1.4.1.89.48.54.12.4.1
Information for a voice VLANs OUI MAC Prefixes configured into the device by management.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanVoiceOUIBasedEntry  

vlanVoiceOUIBasedPrefix 1.3.6.1.4.1.89.48.54.12.4.1.1
The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUIBasedTable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(3)  

vlanVoiceOUIBasedDescription 1.3.6.1.4.1.89.48.54.12.4.1.2
An optional text that describes the OUI.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanVoiceOUIBasedEntryRowStatus 1.3.6.1.4.1.89.48.54.12.4.1.3
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vlanVoiceOUIBasedPortTable 1.3.6.1.4.1.89.48.54.12.5
A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanVoiceOUIBasedPortEntry

vlanVoiceOUIBasedPortEntry 1.3.6.1.4.1.89.48.54.12.5.1
Static and dynamic per port information for a voice VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanVoiceOUIBasedPortEntry  

vlanVoiceOUIBasedPortEnable 1.3.6.1.4.1.89.48.54.12.5.1.1
Enable this port to be a candidate to be added into the Voice VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanVoiceOUIBasedPortVlanIndex 1.3.6.1.4.1.89.48.54.12.5.1.2
The Voice VLAN-ID the port is a candidate to be in.
Status: current Access: read-write
OBJECT-TYPE    
  VlanIndex  

vlanVoiceOUIBasedPortSecure 1.3.6.1.4.1.89.48.54.12.5.1.3
Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanVoiceOUIBasedPortCurrentMembership 1.3.6.1.4.1.89.48.54.12.5.1.4
Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

vlanVoiceOUIBasedPortQosMode 1.3.6.1.4.1.89.48.54.12.5.1.5
Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER src(1), all(2)  

vlanVoiceOUIBasedAgingTimeout 1.3.6.1.4.1.89.48.54.12.6
The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..43200