RAD-IMA-MIB

File: RAD-IMA-MIB.mib (5713 bytes)

Imported modules

SNMPv2-SMI RAD-MIB IMA-MIB

Imported symbols

OBJECT-TYPE NOTIFICATION-TYPE Integer32
radAtm radSysAtmEvents imaGroupFailureStatus

Defined Types

ImaXLinkEntry  
SEQUENCE    
  imaLinkDirection INTEGER
  imaLinkItcLBClkSrc INTEGER

ImaXGroupEntry  
SEQUENCE    
  imaGroupVersion INTEGER
  imaGroupCtcTxClkSrc INTEGER
  imaGroupCtcTxClkSrcPort Integer32

Defined Values

radAtmIma 1.3.6.1.4.1.164.12.5
OBJECT IDENTIFIER    

imaPrimaryClk 1.3.6.1.4.1.164.12.5.1
Clock source to be transmitted to the user side, where user module is in 'External' clock source.
OBJECT-TYPE    
  INTEGER notApplicable(1), link1(2), link2(3), link3(4), link4(5), automatic(6)  

imaXLinkTable 1.3.6.1.4.1.164.12.5.2
The IMA Link Status and Configuration table. This table contains additional objects for the link table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImaXLinkEntry

imaXLinkEntry 1.3.6.1.4.1.164.12.5.2.1
An entry in the IMA Link table.
OBJECT-TYPE    
  ImaXLinkEntry  

imaLinkDirection 1.3.6.1.4.1.164.12.5.2.1.1
the Link direction.
OBJECT-TYPE    
  INTEGER rx(1), tx(2), both(3)  

imaLinkItcLBClkSrc 1.3.6.1.4.1.164.12.5.2.1.2
Clock source for the current Tx-line.
OBJECT-TYPE    
  INTEGER link1(1), link2(2), link3(3), link4(4), internal(5), external(6), automatic(7), loopback(8)  

imaXGroupTable 1.3.6.1.4.1.164.12.5.3
The IMA group Status and Configuration table. This table contains additional objects for the Group table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImaXGroupEntry

imaXGroupEntry 1.3.6.1.4.1.164.12.5.3.1
An entry in the IMA Group table.
OBJECT-TYPE    
  ImaXGroupEntry  

imaGroupVersion 1.3.6.1.4.1.164.12.5.3.1.1
IMA Version.
OBJECT-TYPE    
  INTEGER ver10(1), ver11(2)  

imaGroupCtcTxClkSrc 1.3.6.1.4.1.164.12.5.3.1.2
The source of the transmitted, common, Clock Source. Applicable if imaGroupNeTxClkMode=ctc(1). Automatic - Dynamic source, taken from the currently reference link. Internal - taken from the Internal clock on card. Loopback - Looped back from one of the ports. In this case a specific port should be selected for imaGroupCtcTxClkSrcPort parameter. Link N - Clock will be looped from one of the links.
OBJECT-TYPE    
  INTEGER link1(1), link2(2), link3(3), link4(4), internal(5), external(6), automatic(7), loopback(8), notApplicable(255)  

imaGroupCtcTxClkSrcPort 1.3.6.1.4.1.164.12.5.3.1.3
This parameter is valid only when imaGroupCtcTxClkSrc=loopback. The value may be any port identifier.
OBJECT-TYPE    
  Integer32  

atmImaGroupStatusChangeTrap 1.3.6.1.4.1.164.6.1.12.0.80
This trap indicates IMA Group status change.
NOTIFICATION-TYPE