PSAX-TRAP-MIB
File:
PSAX-TRAP-MIB.mib (6243 bytes)
Imported modules
Imported symbols
Defined Values
| lucent |
1.3.6.1.4.1.1751 |
| OBJECT IDENTIFIER |
|
|
|
| products |
1.3.6.1.4.1.1751.1 |
| OBJECT IDENTIFIER |
|
|
|
| softSwitch |
1.3.6.1.4.1.1751.1.1198 |
| OBJECT IDENTIFIER |
|
|
|
| psaxTraps |
1.3.6.1.4.1.1751.1.1198.6.0 |
| The MIB module for entities implementing the xxxx
protocol. |
| MODULE-IDENTITY |
|
|
|
| psaxCSConnectionStatus |
1.3.6.1.4.1.1751.1.1198.6.0.0 |
| Indicates the registration status of the device
server(registered, unregistered or registration
failed).
VARIABLE DEFINITIONS:
1) timeStamp - time when the alarm occured, in
. format
2) code - bitwise OR of severity, facility, errorCode,
instanceID, severity<<28 | facility<<24 |
errorCode<<16 | instanceid
3) csID - call server identifier which will be
returned by the call server when any device server
registers to it.
4) csType - call server type, 'primary' or 'secondary'.
(Right now this information does not come from the
call server. It is set to 'primary'.), value = 0 for
primary, value = 1 for secondary
5) registrationStatus - registered | unregistred |
registrationFailed depending on whether the device
server is registered, unregistered or could not
register to the call server respectively.
6) reason - {unreachable | unknown |
invalidParam}, indicates the cause for the
registration failure.
7) comment - Any comment sent along with this trap.
Severity: INFO for registration/unregistration.
CRITICAL for failed registration. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| psaxGatewayUtilization |
1.3.6.1.4.1.1751.1.1198.6.0.1 |
| It is triggered when a preset utilization value
is set for a gateway and it has met that utilization.
VARIABLE DEFINITIONS:
1) timeStamp - time when the alarm occured, in
. format
2) code - bitwise OR of severity, facility, errorCode,
instanceID, severity<<28 | facility<<24 |
errorCode<<16 | instanceid
2) gwID - unique identifier assigned to the gateway.
3) moduleID - The module of the gateway that reports
utilization.
4) percent - The percent of utilization being reported.
5) comment - Any comment sent along with this trap
Severity: INFO/MINOR depending on the preset value. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| psaxDSError |
1.3.6.1.4.1.1751.1.1198.6.0.2 |
| When any error occurs in the device server.
VARIABLE DEFINITIONS:
1) timeStamp - time when the alarm occured, in
. format
2) code - bitwise OR of severity, facility, errorCode,
instanceID, severity<<28 | facility<<24 |
errorCode<<16 | instanceid
2) reason - the reason for the error that occurs
in the device server. Takes one of these values:
internalError | systemResourceUnavailable |
invalidGatewayID | unknown
3) comment - Any comment sent along with this trap.
Severity: INFO (internalError),
MAJOR (systemResourceUnavailable),
INFO (invalidGatewayID - gateway ID is invalid or
no such gateway exists)
INFO (unknownError - any other errors). |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| psaxUnreachableGateway |
1.3.6.1.4.1.1751.1.1198.6.0.3 |
| When any gateway is unreachable . Either the
TCP/IP address is wrong or the gateway is down.
VARIABLE DEFINITIONS:
1) timeStamp - time when the alarm occured, in
. format
2) code - bitwise OR of severity, facility, errorCode,
instanceID, severity<<28 | facility<<24 |
errorCode<<16 | instanceid
3) gwID - unique identifier of the gateway
4) gwType - protocol handled by the gateway,
{ h323 | sip | psax }
5) gwIP - IP Address of the gateway, the device server
tries to connect to, in order to place a call.
6) port - call signalling port of the gateway,
the device server tries to connect to.
7) comment - Any comment sent along with this trap
Severity: MINOR depending on the preset value. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| psaxCommandFailed |
1.3.6.1.4.1.1751.1.1198.6.0.4 |
| Triggered when any request is failed by the
device server.
VARIABLE DEFINITIONS:
1) timeStamp - time when the alarm occured, in
. format
2) code - bitwise OR of severity, facility, errorCode,
instanceID, severity<<28 | facility<<24 |
errorCode<<16 | instanceid
3) reason - reason for the failure of the command.
{internalError | systemResourceUnavailable
|notSupported | unknown }
4) comment - Any comment along with this trap.
Severity: MINOR (or may be command sensitive). |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|