PSAX-DS1-MIB

File: PSAX-DS1-MIB.mib (4103 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
SNMPv2-SMI SNMPv2-TC

Imported symbols

enterprises Counter OBJECT-TYPE
DisplayString MODULE-IDENTITY ObjectName
Integer32 Counter32 snmpModules
TruthValue DisplayString TestAndIncr
TimeStamp RowStatus

Defined Values

lucent 1.3.6.1.4.1.1751
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.1751.1
OBJECT IDENTIFIER    

softSwitch 1.3.6.1.4.1.1751.1.1198
OBJECT IDENTIFIER    

psaxDeviceServer 1.3.6.1.4.1.1751.1.1198.6
OBJECT IDENTIFIER    

psaxDS1 1.3.6.1.4.1.1751.1.1198.6.1
The MIB module for entities implementing the xxxx protocol.
MODULE-IDENTITY    

psaxSystem 1.3.6.1.4.1.1751.1.1198.6.1.1
OBJECT IDENTIFIER    

dsInfo 1.3.6.1.4.1.1751.1.1198.6.1.1.1
Device Server information. This value should include the full name and version identification and/or manufacturer information. It is mandatory that this contains only printable ASCII characters
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..256)  

dsProtocolInfo 1.3.6.1.4.1.1751.1.1198.6.1.1.2
Device Server PSAX/SIP stack information. This value should include the full name and version identification and/or manufacturer information of the PSAX/SIP Stack used in the device server implementation. It is mandatory that this contains only printable ASCII characters
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..256)  

logLevel 1.3.6.1.4.1.1751.1.1198.6.1.1.3
Device Server Log Level. A minimum logging level is always set for the device servers, which logs errors and warnings. If still more verbosity is required, that can be done by setting this parameter to a required level. 1. Error 2. Warning 3. Info
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

succeededCalls 1.3.6.1.4.1.1751.1.1198.6.1.1.4
Total number of calls successfully made since the last uptime of this device server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

activeCalls 1.3.6.1.4.1.1751.1.1198.6.1.1.5
Number of calls which are still progressing at this time by this device server
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

failedCalls 1.3.6.1.4.1.1751.1.1198.6.1.1.6
Total Number of calls failed since the last uptime of this device server
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

reloadConfig 1.3.6.1.4.1.1751.1.1198.6.1.1.7
This is to tell the device server to load it's configuration again. This is done when some configuration parameters need to be updated in the system
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

gatewayDelete 1.3.6.1.4.1.1751.1.1198.6.1.1.8
Informs the device server to delete the entry of the gateway from the configuration file
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

resetLog 1.3.6.1.4.1.1751.1.1198.6.1.1.9
To discard previous log and to start logging afresh resetLog would be used
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER Size(1..65535)