PRVT-UPS-MIB

File: PRVT-UPS-MIB.mib (6303 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF PRVT-SWITCH-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
NOTIFICATION-GROUP switch

Defined Values

prvtUPSMib 1.3.6.1.4.1.738.1.5.103
MIB module for monitoring the UPS connected to switch or ipSwitch
MODULE-IDENTITY    

prvtUPSNotifications 1.3.6.1.4.1.738.1.5.103.0
OBJECT IDENTIFIER    

upsStatus 1.3.6.1.4.1.738.1.5.103.1
OBJECT IDENTIFIER    

prvtUPSConformance 1.3.6.1.4.1.738.1.5.103.2
OBJECT IDENTIFIER    

upsConnectedStatus 1.3.6.1.4.1.738.1.5.103.1.1
This object indicates, if a UPS is connected to the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

upsLinePowerStatus 1.3.6.1.4.1.738.1.5.103.1.2
This object indicates the external AD power line status: the UPS is supplying the power from the internal battery or from an external AC power connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), fromExternalConnection(2), fromInternalBattery(3)  

upsBatteryStorageStatus 1.3.6.1.4.1.738.1.5.103.1.3
This object shows the estimated time left until the UPS battery will discharge to the level at which the UPS must shutdown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), moreThan30Minutes(2), lessThan30Minutes(3)  

upsInternalStatus 1.3.6.1.4.1.738.1.5.103.1.4
This object shows if the UPS has some kind of an internal failure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), failure(3)  

upsStatusChange 1.3.6.1.4.1.738.1.5.103.0.1
The upsStatusChange trap indicates that the sending agent monitor detected a change in the status of the external UPS, connected to the device.
Status: current Access: read-only
NOTIFICATION-TYPE    

prvtUPSMIBGroups 1.3.6.1.4.1.738.1.5.103.2.2
OBJECT IDENTIFIER    

prvtUPSNotificationGroup 1.3.6.1.4.1.738.1.5.103.2.2.3
Private Notification Group.
Status: current Access: read-only
NOTIFICATION-GROUP