PKTC-MTA-MIB

File: PKTC-MTA-MIB.mib (28733 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
CLAB-DEF-MIB IF-MIB DOCS-CABLE-DEVICE-MIB

Imported symbols

TEXTUAL-CONVENTION MODULE-IDENTITY OBJECT-TYPE
Integer32 Unsigned32 Counter32
NOTIFICATION-TYPE TruthValue DisplayString
DateAndTime RowStatus OBJECT-GROUP
MODULE-COMPLIANCE clabProjPacketCable ifIndex
docsDevSwCurrentVers

Defined Types

X509Certificate  
An X509 digital certificate encoded as an ASN.1 DER object.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..4096)  

PktcMtaDevSecurityEntry  
SEQUENCE    
  pktcMtaDevServProviderCertificate OCTET STRING
  pktcMtaDevTelephonyCertificate OCTET STRING
  pktcMtaDevKerberosRealm OCTET STRING
  pktcMtaDevKerbPrincipalName DisplayString
  pktcMtaDevServGracePeriod Integer32
  pktcMtaDevLocalSystemCertificate OCTET STRING
  pktcMtaDevKeyMgmtTimeout1 Integer32
  pktcMtaDevKeyMgmtTimeout2 Integer32

PktcMtaDevTgsEntry  
SEQUENCE    
  pktcMtaDevTgsIndex Integer32
  pktcMtaDevTgsLocation DisplayString
  pktcMtaDevTgsStatus RowStatus

PktcMtaDevEvControlEntry  
SEQUENCE    
  pktcMtaDevEvPriority INTEGER
  pktcMtaDevEvReporting BITS

PktcMtaDevEventEntry  
SEQUENCE    
  pktcMtaDevEvIndex INTEGER
  pktcMtaDevEvFirstTime DateAndTime
  pktcMtaDevEvLastTime DateAndTime
  pktcMtaDevEvCounts Counter32
  pktcMtaDevEvLevel INTEGER
  pktcMtaDevEvId Unsigned32
  pktcMtaDevEvText DisplayString

Defined Values

pktcMtaMib 1.3.6.1.4.1.4491.2.2.1
This MIB module supplies the basic management objects for the MTA Device.
MODULE-IDENTITY    

pktcMtaMibObjects 1.3.6.1.4.1.4491.2.2.1.1
OBJECT IDENTIFIER    

pktcMtaDevBase 1.3.6.1.4.1.4491.2.2.1.1.1
OBJECT IDENTIFIER    

pktcMtaDevServer 1.3.6.1.4.1.4491.2.2.1.1.2
OBJECT IDENTIFIER    

pktcMtaDevSecurity 1.3.6.1.4.1.4491.2.2.1.1.3
OBJECT IDENTIFIER    

pktcMtaDevEvent 1.3.6.1.4.1.4491.2.2.1.1.4
OBJECT IDENTIFIER    

pktcMtaDevResetNow 1.3.6.1.4.1.4491.2.2.1.1.1.1
Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

pktcMtaDevSerialNumber 1.3.6.1.4.1.4491.2.2.1.1.1.2
The manufacturer's serial number for this MTA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

pktcMtaDevHardwareVersion 1.3.6.1.4.1.4491.2.2.1.1.1.3
The manufacturer's hardware version for this MTA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

pktcMtaDevMacAddress 1.3.6.1.4.1.4491.2.2.1.1.1.4
The telephony MAC address for this device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

pktcMtaDevFQDN 1.3.6.1.4.1.4491.2.2.1.1.1.5
The Fully Qualified Domain Name for this MTA.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevEndPntCount 1.3.6.1.4.1.4491.2.2.1.1.1.6
The physical end points for this MTA.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

pktcMtaDevEnabled 1.3.6.1.4.1.4491.2.2.1.1.1.7
The MTA Admin Status of this device, where True(1) means the voice feature is enabled and false(2) indicates that it is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

pktcMtaDevTypeIdentifier 1.3.6.1.4.1.4491.2.2.1.1.1.8
This is a copy of the device type identifier used in the DHCP option 60 exchanged between the MTA and the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pktcMtaDevProvisioningState 1.3.6.1.4.1.4491.2.2.1.1.1.9
This object indicates the completion state of the provisioning process. Pass or Fail states occur after processing of the config file is completed. InProgress occurs from boot time until config file processing is complete. Fail state requires manual intervention.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), inProgress(2), fail(3)  

pktcMtaDevHttpAccess 1.3.6.1.4.1.4491.2.2.1.1.1.10
This indicates whether HTTP file access is supported for MTA configuration file transfer.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pktcMtaDevManufacturerCertificate 1.3.6.1.4.1.4491.2.2.1.1.3.1
ASN.1 DER encoding of the MTA Manufacturer's X.509 public-key certificate, called MTA Manufacturer Certificate. It is issued to each MTA manufacturer and is installed into each MTA either in the factory or with a code download. The provisioning server cannot update this certificate.
Status: current Access: read-only
OBJECT-TYPE    
  X509Certificate  

pktcMtaDevCertificate 1.3.6.1.4.1.4491.2.2.1.1.3.2
ASN.1 DER encoding of the MTA's X.509 public-key certificate issued by the manufacturer and installed into the embedded-MTA in the factory. This certificate, called MTA Device Certificate, contains the MTA's MAC address. It cannot be updated by the provisioning server.
Status: current Access: read-only
OBJECT-TYPE    
  X509Certificate  

pktcMtaDevSignature 1.3.6.1.4.1.4491.2.2.1.1.3.3
A unique signature created by the MTA for each SNMP Inform or SNMP Trap or SNMP GetResponse message exchanged prior to enabling SNMPv3 security ASN.1 encoded Digital signature in the Cryptographic message syntax (includes nonce).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

pktcMtaDevCorrelationId 1.3.6.1.4.1.4491.2.2.1.1.3.4
Random value generated by the MTA for use in registration authorization. It is for use only in the MTA initialization messages and for MTA configuration file download.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pktcMtaDevSecurityTable 1.3.6.1.4.1.4491.2.2.1.1.3.5
Contains per endpoint security information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcMtaDevSecurityEntry

pktcMtaDevSecurityEntry 1.3.6.1.4.1.4491.2.2.1.1.3.5.1
List of security attributes for a single IPCablecom endpoint interface associated with ifType(104).
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcMtaDevSecurityEntry  

pktcMtaDevServProviderCertificate 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.1
ASN.1 DER encoding of the Telephony Service Provider's X.509 public-key certificate, called Service Provider Certificate. It serves as the root of the intra-domain trust hierarchy. Each MTA is configured with this certificate so that it can authenticate KDCs owned by the same service provider. The provisioning server needs the ability to update this certificate in the MTAs via both SNMP and configuration files.
Status: current Access: read-write
OBJECT-TYPE    
  X509Certificate  

pktcMtaDevTelephonyCertificate 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.2
ASN.1 DER encoding of the MTA's X.509 public-key certificate issued by the Service Provider with either the Service Provider CA or a Local System CA. This certificate, called MTA Telephony Certificate, contains the same public key as the MTA Device Certificate issued by the manufacturer. It is used to authenticate the identity of the MTA to the TGS (during PKINIT exchanges). The provisioning server needs the ability to update this certificate in the MTAs via both SNMP and configuration files.
Status: current Access: read-write
OBJECT-TYPE    
  X509Certificate  

pktcMtaDevKerberosRealm 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.3
Specifies a Kerberos realm (i.e. administrative domain), required for IPCablecom key management].
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1280)  

pktcMtaDevKerbPrincipalName 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.4
Kerberos principal name for the Call Agent. This information is required in order for the MTA to obtain Call Agent Kerberos tickets. This principal name does not include the realm, which is specified as a separate field in this configuration file. A Single Kerberos principal name MAY be shared among several Call Agents.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

pktcMtaDevServGracePeriod 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.5
The MTA MUST obtain a new Kerberos ticket (with a PKINIT exchange) this many minutes before the old ticket expires. The minimum allowable value is 15 mins. The default is 30 mins.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 15..600  

pktcMtaDevLocalSystemCertificate 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.6
Telephony Service Provider CA may delegate the issuance of certificates to a regional Certification Authority called Local System CA (with the corresponding Local System Certificate). This parameter is the ASN.1 DER encoding of the Local System Certificate. It MUST have a non-empty value when the MTA Telephony certificate is signed by a Local System CA. Otherwise, the value MUST be of length 0.
Status: current Access: read-write
OBJECT-TYPE    
  X509Certificate  

pktcMtaDevKeyMgmtTimeout1 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.7
This timeout applies only when the MTA initiated key management. It is the period during which the MTA will save a nonce (inside the sequence number field) from the sent out AP Request and wait for the matching AP Reply from the CMS.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 15..600  

pktcMtaDevKeyMgmtTimeout2 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.8
This timeout applies only when the CMS initiated key management (with a Wake Up or Rekey message). It is the period during which the MTA will save a nonce (inside the sequence number field) from the sent out AP Request and wait for the matching AP Reply from the CMS.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 15..600  

pktcMtaDevTgsTable 1.3.6.1.4.1.4491.2.2.1.1.3.8
Contains per endpoint Ticket Granting Server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcMtaDevTgsEntry

pktcMtaDevTgsEntry 1.3.6.1.4.1.4491.2.2.1.1.3.8.1
List of Tgs attributes for a single IPCablecom endpoint interface associated with ifType(104).
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcMtaDevTgsEntry  

pktcMtaDevTgsIndex 1.3.6.1.4.1.4491.2.2.1.1.3.8.1.1
Index into the TGS table for TGS locations. IfType specifies the endpoint, TgsIndex specifies a TGS.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

pktcMtaDevTgsLocation 1.3.6.1.4.1.4491.2.2.1.1.3.8.1.2
Name of the TGS - Ticket Granting Server, which is the Kerberos Server. This parameter is a FQDN or Ipv4 address. There may be multiple entries of this type. The order in which these entries are listed is the priority order in which the MTA will attempt to contact them for this endpoint.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

pktcMtaDevTgsStatus 1.3.6.1.4.1.4491.2.2.1.1.3.8.1.3
This object contains the Row Status associated with the pktcMtaDevTgsTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pktcMtaDevServerBootState 1.3.6.1.4.1.4491.2.2.1.1.2.1
If operational(1), the device has completed loading and processing of configuration parameters and the Access Node has completed the Registration exchange. If disabled(2) then the device was administratively disabled, possibly by being refused network access in the configuration file. If waitingForDhcpOffer(3) then a DHCP Discover has been transmitted and no offer has yet been received. If waitingForDhcpResponse(4) then a DHCP Request has been transmitted and no response has yet been received. If waitingForConfig(5) then a request to the config parameter server has been made and no response received. If refusedByCmts(6) then the Registration Request/Response exchange with the Access Node failed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER operational(1), disabled(2), waitingForDhcpOffer(3), waitingForDhcpResponse(4), waitingForConfig(5), refusedByCmts(6), other(7), unknown(8)  

pktcMtaDevServerDhcp 1.3.6.1.4.1.4491.2.2.1.1.2.2
The IP address or FQDN of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevServerDns1 1.3.6.1.4.1.4491.2.2.1.1.2.3
The IP address or FQDN of the primary DNS server that resolved an IP address for this device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevServerDns2 1.3.6.1.4.1.4491.2.2.1.1.2.4
The IP address or FQDN of the secondary DNS server that resolved an IP address for this device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevConfigFile 1.3.6.1.4.1.4491.2.2.1.1.2.5
The URL of the TFTP/HTTP file for downloading provisioning and configuration parameters to this device. Returns NULL if the server address is unknown. Supports both TFTP and HTTP
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevSnmpEntity 1.3.6.1.4.1.4491.2.2.1.1.2.6
The IP address or FQDN of the SNMP entity for provisioning trap handling that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevEvControl 1.3.6.1.4.1.4491.2.2.1.1.4.1
Setting this object to resetLog(1) empties the event log. All data is deleted. Setting it to useDefaultReporting(2) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER resetLog(1), useDefaultReporting(2)  

pktcMtaDevEvSyslog 1.3.6.1.4.1.4491.2.2.1.1.4.2
The IP address or FQDN of the Syslog server. If 0.0.0.0, syslog transmission is inhibited.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pktcMtaDevEvThrottleAdminStatus 1.3.6.1.4.1.4491.2.2.1.1.4.3
Controls the transmission of traps and syslog messages with respect to the trap pacing threshold. unconstrained(1) causes traps and syslog messages to be transmitted without regard to the threshold settings. maintainBelowThreshold(2) causes trap transmission and syslog messages to be suppressed if the number of traps would otherwise exceed the threshold. stopAtThreshold(3) causes trap transmission to cease at the threshold, and not resume until directed to do so. inhibited(4) causes all trap transmission and syslog messages to be suppressed. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. Writing to this object resets the thresholding state. At initial startup, this object has a default value of unconstrained(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unconstrained(1), maintainBelowThreshold(2), stopAtThreshold(3), inhibited(4)  

pktcMtaDevEvThrottleInhibited 1.3.6.1.4.1.4491.2.2.1.1.4.4
If true(1), trap and syslog transmission is currently inhibited due to thresholds and/or the current setting of pktcMtaDevEvThrottleAdminStatus. In addition, this is set to true(1) if transmission is inhibited due to no syslog (pktcMtaDevEvSyslog) or trap (pktcMtaDevNmAccessEntry) destinations having been set.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pktcMtaDevEvThrottleThreshold 1.3.6.1.4.1.4491.2.2.1.1.4.5
Number of trap/syslog events per pktcMtaDevEvThrottleInterval to be transmitted before throttling. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. At initial startup, this object returns 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

pktcMtaDevEvThrottleInterval 1.3.6.1.4.1.4491.2.2.1.1.4.6
The interval over which the trap threshold applies. At initial startup, this object has a value of 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2147483647  

pktcMtaDevEvControlTable 1.3.6.1.4.1.4491.2.2.1.1.4.7
This table allows control of the reporting of event classes. For each event priority, a combination of logging and reporting mechanisms may be chosen. The mapping of event types to priorities is vendor-dependent. Vendors may also choose to allow the user to control that mapping through proprietary means.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcMtaDevEvControlEntry

pktcMtaDevEvControlEntry 1.3.6.1.4.1.4491.2.2.1.1.4.7.1
Allows configuration of the reporting mechanisms for a particular event priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcMtaDevEvControlEntry  

pktcMtaDevEvPriority 1.3.6.1.4.1.4491.2.2.1.1.4.7.1.1
The priority level that is controlled by this entry. These are ordered from most (emergency) to least (debug) critical. Each event with a CM or Access Node has a particular priority level associated with it (as defined by the vendor). During normal operation no event more critical than notice(6) should be generated. Events between warning and emergency should be generated at appropriate levels of problems (e.g. emergency when the box is about to crash).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8)  

pktcMtaDevEvReporting 1.3.6.1.4.1.4491.2.2.1.1.4.7.1.2
Defines the action to be taken on occurrence of this event class. Implementations may not necessarily support all options for all event classes, but at minimum must allow traps and syslogging to be disabled. If the local(0) bit is set, then log to the internal log, if the traps(1) bit is set, then generate a trap, if the syslog(2) bit is set, then send a syslog message (assuming the syslog address is set).
Status: current Access: read-write
OBJECT-TYPE    
  BITS local(0), traps(1), syslog(2)  

pktcMtaDevEventTable 1.3.6.1.4.1.4491.2.2.1.1.4.8
Contains a log of network and device events that may be of interest in fault isolation and troubleshooting.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcMtaDevEventEntry

pktcMtaDevEventEntry 1.3.6.1.4.1.4491.2.2.1.1.4.8.1
Describes a network or device event that may be of interest in fault isolation and troubleshooting. Multiple sequential identical events are represented by incrementing pktcMtaDevEvCounts and setting pktcMtaDevEvLastTime to the current time rather than creating multiple rows. Entries are created with the first occurrance of an event. pktcMtaDevEvControl can be used to clear the table. Individual events can not be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcMtaDevEventEntry  

pktcMtaDevEvIndex 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.1
Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via pktcMtaDevEvControl, (b) the device reboots and does not implement non-volatile storage for this log, or (c) it reaches the value 2^31. The next entry for all the above cases is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2147483647  

pktcMtaDevEvFirstTime 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.2
The time that this entry was created.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

pktcMtaDevEvLastTime 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.3
If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as pktcMtaDevEvFirstTime.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

pktcMtaDevEvCounts 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.4
The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktcMtaDevEvLevel 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.5
The priority level of this event as defined by the vendor. These are ordered from most serious (critical) to least serious (debug).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), information(5), notice(6), debug(7)  

pktcMtaDevEvId 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.6
For this product, uniquely identifies the type of event that is reported by this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pktcMtaDevEvText 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.7
Provides a human-readable description of the event, including all relevant context (interface numbers, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pktcMtaNotification 1.3.6.1.4.1.4491.2.2.1.2
OBJECT IDENTIFIER    

pktcMtaConformance 1.3.6.1.4.1.4491.2.2.1.3
OBJECT IDENTIFIER    

pktcMtaCompliances 1.3.6.1.4.1.4491.2.2.1.3.1
OBJECT IDENTIFIER    

pktcMtaGroups 1.3.6.1.4.1.4491.2.2.1.3.2
OBJECT IDENTIFIER    

pktcMtaProvisioningEnrollment 1.3.6.1.4.1.4491.2.2.1.2.1
This inform is issued to initiate the IPCablecom process provisioning.
Status: current Access: read-only
NOTIFICATION-TYPE    

pktcMtaProvisioningStatus 1.3.6.1.4.1.4491.2.2.1.2.2
This inform is issued to confirm completion of the IPCablecom provisioning process, and indicate the completion state.
Status: current Access: read-only
NOTIFICATION-TYPE    

pktcMtaBasicCompliance 1.3.6.1.4.1.4491.2.2.1.3.1.3
The compliance statement for devices that implement MTA feature.
Status: current Access: read-only
MODULE-COMPLIANCE    

pktcMtaGroup 1.3.6.1.4.1.4491.2.2.1.3.2.1
Group of objects for IPCablecom MTA MIB.
Status: current Access: read-only
OBJECT-GROUP