PCE-PCEP-MIB

File: PCE-PCEP-MIB.mib (75181 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE mib-2
NOTIFICATION-TYPE Unsigned32 Counter32
TruthValue TimeStamp MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP InetAddressType
InetAddress

Defined Types

PcePcepEntityEntry  
SEQUENCE    
  pcePcepEntityIndex Unsigned32
  pcePcepEntityAdminStatus INTEGER
  pcePcepEntityOperStatus INTEGER
  pcePcepEntityAddrType InetAddressType
  pcePcepEntityAddr InetAddress
  pcePcepEntityConnectTimer Unsigned32
  pcePcepEntityConnectMaxRetry Unsigned32
  pcePcepEntityInitBackoffTimer Unsigned32
  pcePcepEntityMaxBackoffTimer Unsigned32
  pcePcepEntityOpenWaitTimer Unsigned32
  pcePcepEntityKeepWaitTimer Unsigned32
  pcePcepEntityKeepAliveTimer Unsigned32
  pcePcepEntityDeadTimer Unsigned32
  pcePcepEntityAllowNegotiation TruthValue
  pcePcepEntityMaxKeepAliveTimer Unsigned32
  pcePcepEntityMaxDeadTimer Unsigned32
  pcePcepEntityMinKeepAliveTimer Unsigned32
  pcePcepEntityMinDeadTimer Unsigned32
  pcePcepEntitySyncTimer Unsigned32
  pcePcepEntityRequestTimer Unsigned32
  pcePcepEntityMaxSessions Unsigned32
  pcePcepEntityMaxUnknownReqs Unsigned32
  pcePcepEntityMaxUnknownMsgs Unsigned32

PcePcepPeerEntry  
SEQUENCE    
  pcePcepPeerAddrType InetAddressType
  pcePcepPeerAddr InetAddress
  pcePcepPeerRole INTEGER
  pcePcepPeerDiscontinuityTime TimeStamp
  pcePcepPeerInitiateSession TruthValue
  pcePcepPeerSessionExists TruthValue
  pcePcepPeerNumSessSetupOK Counter32
  pcePcepPeerNumSessSetupFail Counter32
  pcePcepPeerSessionUpTime TimeStamp
  pcePcepPeerSessionFailTime TimeStamp
  pcePcepPeerSessionFailUpTime TimeStamp
  pcePcepPeerAvgRspTime Unsigned32
  pcePcepPeerLWMRspTime Unsigned32
  pcePcepPeerHWMRspTime Unsigned32
  pcePcepPeerNumPCReqSent Counter32
  pcePcepPeerNumPCReqRcvd Counter32
  pcePcepPeerNumPCRepSent Counter32
  pcePcepPeerNumPCRepRcvd Counter32
  pcePcepPeerNumPCErrSent Counter32
  pcePcepPeerNumPCErrRcvd Counter32
  pcePcepPeerNumPCNtfSent Counter32
  pcePcepPeerNumPCNtfRcvd Counter32
  pcePcepPeerNumKeepaliveSent Counter32
  pcePcepPeerNumKeepaliveRcvd Counter32
  pcePcepPeerNumUnknownRcvd Counter32
  pcePcepPeerNumCorruptRcvd Counter32
  pcePcepPeerNumReqSent Counter32
  pcePcepPeerNumSvecSent Counter32
  pcePcepPeerNumSvecReqSent Counter32
  pcePcepPeerNumReqSentPendRep Counter32
  pcePcepPeerNumReqSentEroRcvd Counter32
  pcePcepPeerNumReqSentNoPathRcvd Counter32
  pcePcepPeerNumReqSentCancelRcvd Counter32
  pcePcepPeerNumReqSentErrorRcvd Counter32
  pcePcepPeerNumReqSentTimeout Counter32
  pcePcepPeerNumReqSentCancelSent Counter32
  pcePcepPeerNumReqSentClosed Counter32
  pcePcepPeerNumReqRcvd Counter32
  pcePcepPeerNumSvecRcvd Counter32
  pcePcepPeerNumSvecReqRcvd Counter32
  pcePcepPeerNumReqRcvdPendRep Counter32
  pcePcepPeerNumReqRcvdEroSent Counter32
  pcePcepPeerNumReqRcvdNoPathSent Counter32
  pcePcepPeerNumReqRcvdCancelSent Counter32
  pcePcepPeerNumReqRcvdErrorSent Counter32
  pcePcepPeerNumReqRcvdCancelRcvd Counter32
  pcePcepPeerNumReqRcvdClosed Counter32
  pcePcepPeerNumRepRcvdUnknown Counter32
  pcePcepPeerNumReqRcvdUnknown Counter32

PcePcepSessEntry  
SEQUENCE    
  pcePcepSessInitiator INTEGER
  pcePcepSessStateLastChange TimeStamp
  pcePcepSessState INTEGER
  pcePcepSessConnectRetry Counter32
  pcePcepSessLocalID Unsigned32
  pcePcepSessRemoteID Unsigned32
  pcePcepSessKeepaliveTimer Unsigned32
  pcePcepSessPeerKeepaliveTimer Unsigned32
  pcePcepSessDeadTimer Unsigned32
  pcePcepSessPeerDeadTimer Unsigned32
  pcePcepSessKAHoldTimeRem Unsigned32
  pcePcepSessOverloaded TruthValue
  pcePcepSessOverloadTime Unsigned32
  pcePcepSessPeerOverloaded TruthValue
  pcePcepSessPeerOverloadTime Unsigned32
  pcePcepSessDiscontinuityTime TimeStamp
  pcePcepSessAvgRspTime Unsigned32
  pcePcepSessLWMRspTime Unsigned32
  pcePcepSessHWMRspTime Unsigned32
  pcePcepSessNumPCReqSent Counter32
  pcePcepSessNumPCReqRcvd Counter32
  pcePcepSessNumPCRepSent Counter32
  pcePcepSessNumPCRepRcvd Counter32
  pcePcepSessNumPCErrSent Counter32
  pcePcepSessNumPCErrRcvd Counter32
  pcePcepSessNumPCNtfSent Counter32
  pcePcepSessNumPCNtfRcvd Counter32
  pcePcepSessNumKeepaliveSent Counter32
  pcePcepSessNumKeepaliveRcvd Counter32
  pcePcepSessNumUnknownRcvd Counter32
  pcePcepSessNumCorruptRcvd Counter32
  pcePcepSessNumReqSent Counter32
  pcePcepSessNumSvecSent Counter32
  pcePcepSessNumSvecReqSent Counter32
  pcePcepSessNumReqSentPendRep Counter32
  pcePcepSessNumReqSentEroRcvd Counter32
  pcePcepSessNumReqSentNoPathRcvd Counter32
  pcePcepSessNumReqSentCancelRcvd Counter32
  pcePcepSessNumReqSentErrorRcvd Counter32
  pcePcepSessNumReqSentTimeout Counter32
  pcePcepSessNumReqSentCancelSent Counter32
  pcePcepSessNumReqRcvd Counter32
  pcePcepSessNumSvecRcvd Counter32
  pcePcepSessNumSvecReqRcvd Counter32
  pcePcepSessNumReqRcvdPendRep Counter32
  pcePcepSessNumReqRcvdEroSent Counter32
  pcePcepSessNumReqRcvdNoPathSent Counter32
  pcePcepSessNumReqRcvdCancelSent Counter32
  pcePcepSessNumReqRcvdErrorSent Counter32
  pcePcepSessNumReqRcvdCancelRcvd Counter32
  pcePcepSessNumRepRcvdUnknown Counter32
  pcePcepSessNumReqRcvdUnknown Counter32

Defined Values

pcePcepMIB 1.3.6.1.2.1.227
This MIB module defines a collection of objects for managing the Path Computation Element Communication Protocol (PCEP). Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
MODULE-IDENTITY    

pcePcepNotifications 1.3.6.1.2.1.227.0
OBJECT IDENTIFIER    

pcePcepObjects 1.3.6.1.2.1.227.1
OBJECT IDENTIFIER    

pcePcepConformance 1.3.6.1.2.1.227.2
OBJECT IDENTIFIER    

pcePcepEntityTable 1.3.6.1.2.1.227.1.1
This table contains information about local PCEP entities. The entries in this table are read-only.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PcePcepEntityEntry

pcePcepEntityEntry 1.3.6.1.2.1.227.1.1.1
This entry represents a local PCEP entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  PcePcepEntityEntry  

pcePcepEntityIndex 1.3.6.1.2.1.227.1.1.1.1
This index is used to uniquely identify the PCEP entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

pcePcepEntityAdminStatus 1.3.6.1.2.1.227.1.1.1.2
The administrative status of this PCEP entity. This is the desired operational status as currently set by an operator or by default in the implementation. The value of pcePcepEntityOperStatus represents the current status of an attempt to reach this desired status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminStatusUp(1), adminStatusDown(2)  

pcePcepEntityOperStatus 1.3.6.1.2.1.227.1.1.1.3
The operational status of the PCEP entity. It takes one of the following values. - operStatusUp(1): the PCEP entity is active. - operStatusDown(2): the PCEP entity is inactive. - operStatusGoingUp(3): the PCEP entity is activating. - operStatusGoingDown(4): the PCEP entity is deactivating. - operStatusFailed(5): the PCEP entity has failed and will recover when possible. - operStatusFailedPerm(6): the PCEP entity has failed and will not recover without operator intervention.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusFailed(5), operStatusFailedPerm(6)  

pcePcepEntityAddrType 1.3.6.1.2.1.227.1.1.1.4
The type of the PCEP entity's Internet address. This object specifies how the value of the pcePcepEntityAddr object should be interpreted. Only values unknown(0), ipv4(1), or ipv6(2) are supported.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

pcePcepEntityAddr 1.3.6.1.2.1.227.1.1.1.5
The local Internet address of this PCEP entity. The type is given by pcePcepEntityAddrType. If operating as a PCE server, the PCEP entity listens on this address. If operating as a PCC, the PCEP entity binds outgoing TCP connections to this address. It is possible for the PCEP entity to operate both as a PCC and a PCE server, in which case it uses this address both to listen for incoming TCP connections and to bind outgoing TCP connections.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

pcePcepEntityConnectTimer 1.3.6.1.2.1.227.1.1.1.6
The time that the PCEP entity will wait to establish a TCP connection with a peer. If a TCP connection is not established within this time, then PCEP aborts the session setup attempt.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

pcePcepEntityConnectMaxRetry 1.3.6.1.2.1.227.1.1.1.7
The maximum number of times the system tries to establish a TCP connection to a peer before the session with the peer transitions to the idle state. When the session transitions to the idle state: - pcePcepPeerSessionExists transitions to false(2). - the associated PcePcepSessEntry is deleted. - a backoff timer runs before the session is tried again.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepEntityInitBackoffTimer 1.3.6.1.2.1.227.1.1.1.8
The initial backoff time for retrying a failed session setup attempt to a peer. The backoff time increases for each failed session setup attempt, until a maximum backoff time is reached. The maximum backoff time is pcePcepEntityMaxBackoffTimer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

pcePcepEntityMaxBackoffTimer 1.3.6.1.2.1.227.1.1.1.9
The maximum backoff time for retrying a failed session setup attempt to a peer. The backoff time increases for each failed session setup attempt, until this maximum value is reached. Session setup attempts then repeats periodically without any further increase in backoff time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepEntityOpenWaitTimer 1.3.6.1.2.1.227.1.1.1.10
The time that the PCEP entity will wait to receive an Open message from a peer after the TCP connection has come up. If no Open message is received within this time, then PCEP terminates the TCP connection and deletes the associated PcePcepSessEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

pcePcepEntityKeepWaitTimer 1.3.6.1.2.1.227.1.1.1.11
The time that the PCEP entity will wait to receive a Keepalive or PCErr message from a peer during session initialization after receiving an Open message. If no Keepalive or PCErr message is received within this time, then PCEP terminates the TCP connection and deletes the associated PcePcepSessEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

pcePcepEntityKeepAliveTimer 1.3.6.1.2.1.227.1.1.1.12
The Keepalive transmission timer that this PCEP entity will propose in the initial OPEN message of each session it is involved in. This is the maximum time between two consecutive messages sent to a peer. Zero means that the PCEP entity prefers not to send Keepalives at all. Note that the actual Keepalive transmission intervals, in either direction of an active PCEP session, are determined by negotiation between the peers as specified by RFC 5440, and so may differ from this configured value. For the actually negotiated values (per session), see pcePcepSessKeepaliveTimer and pcePcepSessPeerKeepaliveTimer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepEntityDeadTimer 1.3.6.1.2.1.227.1.1.1.13
The DeadTimer that this PCEP entity will propose in the initial OPEN message of each session it is involved in. This is the time after which a peer should declare a session down if it does not receive any PCEP messages. Zero suggests that the peer does not run a DeadTimer at all.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepEntityAllowNegotiation 1.3.6.1.2.1.227.1.1.1.14
Whether the PCEP entity will permit negotiation of session parameters.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pcePcepEntityMaxKeepAliveTimer 1.3.6.1.2.1.227.1.1.1.15
In PCEP session parameter negotiation, the maximum value that this PCEP entity will accept from a peer for the interval between Keepalive transmissions. Zero means that the PCEP entity will allow no Keepalive transmission at all.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepEntityMaxDeadTimer 1.3.6.1.2.1.227.1.1.1.16
In PCEP session parameter negotiation, the maximum value that this PCEP entity will accept from a peer for the DeadTimer. Zero means that the PCEP entity will allow not running a DeadTimer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepEntityMinKeepAliveTimer 1.3.6.1.2.1.227.1.1.1.17
In PCEP session parameter negotiation, the minimum value that this PCEP entity will accept for the interval between Keepalive transmissions. Zero means that the PCEP entity insists on no Keepalive transmission at all.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepEntityMinDeadTimer 1.3.6.1.2.1.227.1.1.1.18
In PCEP session parameter negotiation, the minimum value that this PCEP entity will accept for the DeadTimer. Zero means that the PCEP entity insists on not running a DeadTimer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepEntitySyncTimer 1.3.6.1.2.1.227.1.1.1.19
The value of SyncTimer is used in the case of a synchronized path computation request using the SVEC object. Consider the case where a PCReq message is received by a PCE that contains the SVEC object referring to M synchronized path computation requests. If after the expiration of the SyncTimer all the M path computation requests have not been received, a protocol error is triggered and the PCE MUST cancel the whole set of path computation requests. The aim of the SyncTimer is to avoid the storage of unused synchronized requests should one of them get lost for some reason (for example, a misbehaving PCC). A value of zero is returned if and only if the entity does not use the SyncTimer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

pcePcepEntityRequestTimer 1.3.6.1.2.1.227.1.1.1.20
The maximum time that the PCEP entity will wait for a response to a PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

pcePcepEntityMaxSessions 1.3.6.1.2.1.227.1.1.1.21
The maximum number of sessions involving this PCEP entity that can exist at any time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepEntityMaxUnknownReqs 1.3.6.1.2.1.227.1.1.1.22
The maximum number of unrecognized requests and replies that any session on this PCEP entity is willing to accept per minute before terminating the session. A PCRep message contains an unrecognized reply if it contains an RP object whose request ID does not correspond to any in-progress request sent by this PCEP entity. A PCReq message contains an unrecognized request if it contains an RP object whose request ID is zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepEntityMaxUnknownMsgs 1.3.6.1.2.1.227.1.1.1.23
The maximum number of unknown messages that any session on this PCEP entity is willing to accept per minute before terminating the session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepPeerTable 1.3.6.1.2.1.227.1.2
This table contains information about peers known by the local PCEP entity. The entries in this table are read-only. This table gives peer information that spans PCEP sessions. Information about current PCEP sessions can be found in the pcePcepSessTable table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PcePcepPeerEntry

pcePcepPeerEntry 1.3.6.1.2.1.227.1.2.1
Information about a single peer that spans all PCEP sessions to that peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  PcePcepPeerEntry  

pcePcepPeerAddrType 1.3.6.1.2.1.227.1.2.1.1
The type of the peer's Internet address. This object specifies how the value of the pcePcepPeerAddr object should be interpreted. Only values unknown(0), ipv4(1), or ipv6(2) are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

pcePcepPeerAddr 1.3.6.1.2.1.227.1.2.1.2
The Internet address of the peer. The type is given by pcePcepPeerAddrType.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

pcePcepPeerRole 1.3.6.1.2.1.227.1.2.1.3
The role that this peer took the last time a session was established. It takes one of the following values. - unknown(0): this peer's role is not known. - pcc(1): this peer is a Path Computation Client (PCC). - pce(2): this peer is a Path Computation Element (PCE). - pccAndPce(3): this peer is both a PCC and a PCE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), pcc(1), pce(2), pccAndPce(3)  

pcePcepPeerDiscontinuityTime 1.3.6.1.2.1.227.1.2.1.4
The value of sysUpTime at the time that the information and statistics in this row were last reset.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcePcepPeerInitiateSession 1.3.6.1.2.1.227.1.2.1.5
Indicates whether the local PCEP entity initiates sessions to this peer or waits for the peer to initiate a session.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pcePcepPeerSessionExists 1.3.6.1.2.1.227.1.2.1.6
Indicates whether a session with this peer currently exists.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pcePcepPeerNumSessSetupOK 1.3.6.1.2.1.227.1.2.1.7
The number of PCEP sessions successfully established with the peer, including any current session. This counter is incremented each time a session with this peer is successfully established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumSessSetupFail 1.3.6.1.2.1.227.1.2.1.8
The number of PCEP sessions with the peer that have been attempted but failed before being fully established. This counter is incremented each time a session retry to this peer fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerSessionUpTime 1.3.6.1.2.1.227.1.2.1.9
The value of sysUpTime the last time a session with this peer was successfully established. If pcePcepPeerNumSessSetupOK is zero, then this object contains zero.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcePcepPeerSessionFailTime 1.3.6.1.2.1.227.1.2.1.10
The value of sysUpTime the last time a session with this peer failed to be established. If pcePcepPeerNumSessSetupFail is zero, then this object contains zero.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcePcepPeerSessionFailUpTime 1.3.6.1.2.1.227.1.2.1.11
The value of sysUpTime the last time a session with this peer failed from active. If pcePcepPeerNumSessSetupOK is zero, then this object contains zero.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcePcepPeerAvgRspTime 1.3.6.1.2.1.227.1.2.1.12
The average response time for this peer. If an average response time has not been calculated for this peer, then this object has the value zero. If pcePcepPeerRole is pcc, then this field is meaningless and is set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepPeerLWMRspTime 1.3.6.1.2.1.227.1.2.1.13
The smallest (low-water mark) response time seen from this peer. If no responses have been received from this peer, then this object has the value zero. If pcePcepPeerRole is pcc, then this field is meaningless and is set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepPeerHWMRspTime 1.3.6.1.2.1.227.1.2.1.14
The greatest (high-water mark) response time seen from this peer. If no responses have been received from this peer, then this object has the value zero. If pcePcepPeerRole is pcc, then this field is meaningless and is set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepPeerNumPCReqSent 1.3.6.1.2.1.227.1.2.1.15
The number of PCReq messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCReqRcvd 1.3.6.1.2.1.227.1.2.1.16
The number of PCReq messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCRepSent 1.3.6.1.2.1.227.1.2.1.17
The number of PCRep messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCRepRcvd 1.3.6.1.2.1.227.1.2.1.18
The number of PCRep messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCErrSent 1.3.6.1.2.1.227.1.2.1.19
The number of PCErr messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCErrRcvd 1.3.6.1.2.1.227.1.2.1.20
The number of PCErr messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCNtfSent 1.3.6.1.2.1.227.1.2.1.21
The number of PCNtf messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumPCNtfRcvd 1.3.6.1.2.1.227.1.2.1.22
The number of PCNtf messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumKeepaliveSent 1.3.6.1.2.1.227.1.2.1.23
The number of Keepalive messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumKeepaliveRcvd 1.3.6.1.2.1.227.1.2.1.24
The number of Keepalive messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumUnknownRcvd 1.3.6.1.2.1.227.1.2.1.25
The number of unknown messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumCorruptRcvd 1.3.6.1.2.1.227.1.2.1.26
The number of corrupted PCEP messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSent 1.3.6.1.2.1.227.1.2.1.27
The number of requests sent to this peer. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepPeerNumPCReqSent because multiple requests can be batched into a single PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumSvecSent 1.3.6.1.2.1.227.1.2.1.28
The number of SVEC objects sent to this peer in PCReq messages. An SVEC object represents a set of synchronized requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumSvecReqSent 1.3.6.1.2.1.227.1.2.1.29
The number of requests sent to this peer that appeared in one or more SVEC objects.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentPendRep 1.3.6.1.2.1.227.1.2.1.30
The number of requests that have been sent to this peer for which a response is still pending.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentEroRcvd 1.3.6.1.2.1.227.1.2.1.31
The number of requests that have been sent to this peer for which a response with an ERO was received. Such responses indicate that a path was successfully computed by the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentNoPathRcvd 1.3.6.1.2.1.227.1.2.1.32
The number of requests that have been sent to this peer for which a response with a NO-PATH object was received. Such responses indicate that the peer could not find a path to satisfy the request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentCancelRcvd 1.3.6.1.2.1.227.1.2.1.33
The number of requests that were canceled by the peer with a PCNtf message. This might be different than pcePcepPeerNumPCNtfRcvd because not all PCNtf messages are used to cancel requests, and a single PCNtf message can cancel multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentErrorRcvd 1.3.6.1.2.1.227.1.2.1.34
The number of requests that were rejected by the peer with a PCErr message. This might be different than pcePcepPeerNumPCErrRcvd because not all PCErr messages are used to reject requests, and a single PCErr message can reject multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentTimeout 1.3.6.1.2.1.227.1.2.1.35
The number of requests that have been sent to a peer and have been abandoned because the peer has taken too long to respond to them.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentCancelSent 1.3.6.1.2.1.227.1.2.1.36
The number of requests that were sent to the peer and explicitly canceled by the local PCEP entity sending a PCNtf.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqSentClosed 1.3.6.1.2.1.227.1.2.1.37
The number of requests that were sent to the peer and implicitly canceled when the session they were sent over was closed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvd 1.3.6.1.2.1.227.1.2.1.38
The number of requests received from this peer. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepPeerNumPCReqRcvd because multiple requests can be batched into a single PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumSvecRcvd 1.3.6.1.2.1.227.1.2.1.39
The number of SVEC objects received from this peer in PCReq messages. An SVEC object represents a set of synchronized requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumSvecReqRcvd 1.3.6.1.2.1.227.1.2.1.40
The number of requests received from this peer that appeared in one or more SVEC objects.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdPendRep 1.3.6.1.2.1.227.1.2.1.41
The number of requests that have been received from this peer for which a response is still pending.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdEroSent 1.3.6.1.2.1.227.1.2.1.42
The number of requests that have been received from this peer for which a response with an ERO was sent. Such responses indicate that a path was successfully computed by the local PCEP entity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdNoPathSent 1.3.6.1.2.1.227.1.2.1.43
The number of requests that have been received from this peer for which a response with a NO-PATH object was sent. Such responses indicate that the local PCEP entity could not find a path to satisfy the request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdCancelSent 1.3.6.1.2.1.227.1.2.1.44
The number of requests received from this peer that were canceled by the local PCEP entity sending a PCNtf message. This might be different than pcePcepPeerNumPCNtfSent because not all PCNtf messages are used to cancel requests, and a single PCNtf message can cancel multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdErrorSent 1.3.6.1.2.1.227.1.2.1.45
The number of requests received from this peer that were rejected by the local PCEP entity sending a PCErr message. This might be different than pcePcepPeerNumPCErrSent because not all PCErr messages are used to reject requests, and a single PCErr message can reject multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdCancelRcvd 1.3.6.1.2.1.227.1.2.1.46
The number of requests that were received from the peer and explicitly canceled by the peer sending a PCNtf.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdClosed 1.3.6.1.2.1.227.1.2.1.47
The number of requests that were received from the peer and implicitly canceled when the session they were received over was closed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumRepRcvdUnknown 1.3.6.1.2.1.227.1.2.1.48
The number of responses to unknown requests received from this peer. A response to an unknown request is a response whose RP object does not contain the request ID of any request that is currently outstanding on the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepPeerNumReqRcvdUnknown 1.3.6.1.2.1.227.1.2.1.49
The number of unknown requests that have been received from a peer. An unknown request is a request whose RP object contains a request ID of zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessTable 1.3.6.1.2.1.227.1.3
A table of PCEP sessions that involve the local PCEP entity. Each entry in this table represents a single session. The entries in this table are read-only. An entry appears in this table when the corresponding PCEP session transitions out of idle state. If the PCEP session transitions back into an idle state, then the corresponding entry in this table is removed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PcePcepSessEntry

pcePcepSessEntry 1.3.6.1.2.1.227.1.3.1
This entry represents a single PCEP session in which the local PCEP entity participates. This entry exists only if the corresponding PCEP session has been initialized by some event, such as manual user configuration, auto-discovery of a peer, or an incoming TCP connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  PcePcepSessEntry  

pcePcepSessInitiator 1.3.6.1.2.1.227.1.3.1.1
The initiator of the session; that is, whether the TCP connection was initiated by the local PCEP entity or the peer. There is a window during session initialization where two sessions can exist between a pair of PCEP speakers, each initiated by one of the speakers. One of these sessions is always discarded before it leaves OpenWait state. However, before it is discarded, two sessions to the given peer appear transiently in this MIB module. The sessions are distinguished by who initiated them, and so this field is an index for pcePcepSessTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

pcePcepSessStateLastChange 1.3.6.1.2.1.227.1.3.1.2
The value of sysUpTime at the time this session entered its current state as denoted by the pcePcepSessState object.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcePcepSessState 1.3.6.1.2.1.227.1.3.1.3
The current state of the session. The set of possible states excludes the idle state since entries do not exist in this table in the idle state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcpPending(1), openWait(2), keepWait(3), sessionUp(4)  

pcePcepSessConnectRetry 1.3.6.1.2.1.227.1.3.1.4
The number of times that the local PCEP entity has attempted to establish a TCP connection for this session without success. The PCEP entity gives up when this reaches pcePcepEntityConnectMaxRetry.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessLocalID 1.3.6.1.2.1.227.1.3.1.5
The value of the PCEP session ID used by the local PCEP entity in the Open message for this session. If pcePcepSessState is tcpPending, then this is the session ID that will be used in the Open message. Otherwise, this is the session ID that was sent in the Open message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessRemoteID 1.3.6.1.2.1.227.1.3.1.6
The value of the PCEP session ID used by the peer in its Open message for this session. If pcePcepSessState is tcpPending or openWait, then this field is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessKeepaliveTimer 1.3.6.1.2.1.227.1.3.1.7
The agreed maximum interval at which the local PCEP entity transmits PCEP messages on this PCEP session. Zero means that the local PCEP entity never sends Keepalives on this session. This field is used if and only if pcePcepSessState is sessionUp. Otherwise, it is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessPeerKeepaliveTimer 1.3.6.1.2.1.227.1.3.1.8
The agreed maximum interval at which the peer transmits PCEP messages on this PCEP session. Zero means that the peer never sends Keepalives on this session. This field is used if and only if pcePcepSessState is sessionUp. Otherwise, it is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessDeadTimer 1.3.6.1.2.1.227.1.3.1.9
The DeadTimer interval for this PCEP session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessPeerDeadTimer 1.3.6.1.2.1.227.1.3.1.10
The peer's DeadTimer interval for this PCEP session. If pcePcepSessState is tcpPending or openWait, then this field is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessKAHoldTimeRem 1.3.6.1.2.1.227.1.3.1.11
The Keepalive hold time remaining for this session. If pcePcepSessState is tcpPending or openWait, then this field is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

pcePcepSessOverloaded 1.3.6.1.2.1.227.1.3.1.12
If the local PCEP entity has informed the peer that it is currently overloaded, then this is set to true. Otherwise, it is set to false.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pcePcepSessOverloadTime 1.3.6.1.2.1.227.1.3.1.13
The interval of time that is remaining until the local PCEP entity will cease to be overloaded on this session. This field is only used if pcePcepSessOverloaded is set to true. Otherwise, it is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepSessPeerOverloaded 1.3.6.1.2.1.227.1.3.1.14
If the peer has informed the local PCEP entity that it is currently overloaded, then this is set to true. Otherwise, it is set to false.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pcePcepSessPeerOverloadTime 1.3.6.1.2.1.227.1.3.1.15
The interval of time that is remaining until the peer will cease to be overloaded. If it is not known how long the peer will stay in overloaded state, this field is set to zero. This field is only used if pcePcepSessPeerOverloaded is set to true. Otherwise, it is not used and MUST be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepSessDiscontinuityTime 1.3.6.1.2.1.227.1.3.1.16
The value of sysUpTime at the time that the statistics in this row were last reset.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcePcepSessAvgRspTime 1.3.6.1.2.1.227.1.3.1.17
The average response time for this peer on this session. If an average response time has not been calculated for this peer, then this object has the value zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepSessLWMRspTime 1.3.6.1.2.1.227.1.3.1.18
The smallest (low-water mark) response time seen from this peer on this session. If no responses have been received from this peer, then this object has the value zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepSessHWMRspTime 1.3.6.1.2.1.227.1.3.1.19
The greatest (high-water mark) response time seen from this peer on this session. If no responses have been received from this peer, then this object has the value zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pcePcepSessNumPCReqSent 1.3.6.1.2.1.227.1.3.1.20
The number of PCReq messages sent on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCReqRcvd 1.3.6.1.2.1.227.1.3.1.21
The number of PCReq messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCRepSent 1.3.6.1.2.1.227.1.3.1.22
The number of PCRep messages sent on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCRepRcvd 1.3.6.1.2.1.227.1.3.1.23
The number of PCRep messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCErrSent 1.3.6.1.2.1.227.1.3.1.24
The number of PCErr messages sent on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCErrRcvd 1.3.6.1.2.1.227.1.3.1.25
The number of PCErr messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCNtfSent 1.3.6.1.2.1.227.1.3.1.26
The number of PCNtf messages sent on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumPCNtfRcvd 1.3.6.1.2.1.227.1.3.1.27
The number of PCNtf messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumKeepaliveSent 1.3.6.1.2.1.227.1.3.1.28
The number of Keepalive messages sent on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumKeepaliveRcvd 1.3.6.1.2.1.227.1.3.1.29
The number of Keepalive messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumUnknownRcvd 1.3.6.1.2.1.227.1.3.1.30
The number of unknown messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumCorruptRcvd 1.3.6.1.2.1.227.1.3.1.31
The number of corrupted PCEP messages received on this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSent 1.3.6.1.2.1.227.1.3.1.32
The number of requests sent on this session. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepSessNumPCReqSent because multiple requests can be batched into a single PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumSvecSent 1.3.6.1.2.1.227.1.3.1.33
The number of SVEC objects sent on this session in PCReq messages. An SVEC object represents a set of synchronized requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumSvecReqSent 1.3.6.1.2.1.227.1.3.1.34
The number of requests sent on this session that appeared in one or more SVEC objects.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentPendRep 1.3.6.1.2.1.227.1.3.1.35
The number of requests that have been sent on this session for which a response is still pending.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentEroRcvd 1.3.6.1.2.1.227.1.3.1.36
The number of successful responses received on this session. A response corresponds 1:1 with an RP object in a PCRep message. A successful response is a response for which an ERO was successfully computed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentNoPathRcvd 1.3.6.1.2.1.227.1.3.1.37
The number of unsuccessful responses received on this session. A response corresponds 1:1 with an RP object in a PCRep message. An unsuccessful response is a response with a NO-PATH object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentCancelRcvd 1.3.6.1.2.1.227.1.3.1.38
The number of requests sent on this session that were canceled by the peer with a PCNtf message. This might be different than pcePcepSessNumPCNtfRcvd because not all PCNtf messages are used to cancel requests, and a single PCNtf message can cancel multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentErrorRcvd 1.3.6.1.2.1.227.1.3.1.39
The number of requests sent on this session that were rejected by the peer with a PCErr message. This might be different than pcePcepSessNumPCErrRcvd because not all PCErr messages are used to reject requests, and a single PCErr message can reject multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentTimeout 1.3.6.1.2.1.227.1.3.1.40
The number of requests sent on this session that have been sent to a peer and have been abandoned because the peer has taken too long to respond to them.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqSentCancelSent 1.3.6.1.2.1.227.1.3.1.41
The number of requests sent on this session that were sent to the peer and explicitly canceled by the local PCEP entity sending a PCNtf.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvd 1.3.6.1.2.1.227.1.3.1.42
The number of requests received on this session. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepSessNumPCReqRcvd because multiple requests can be batched into a single PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumSvecRcvd 1.3.6.1.2.1.227.1.3.1.43
The number of SVEC objects received on this session in PCReq messages. An SVEC object represents a set of synchronized requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumSvecReqRcvd 1.3.6.1.2.1.227.1.3.1.44
The number of requests received on this session that appeared in one or more SVEC objects.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdPendRep 1.3.6.1.2.1.227.1.3.1.45
The number of requests that have been received on this session for which a response is still pending.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdEroSent 1.3.6.1.2.1.227.1.3.1.46
The number of successful responses sent on this session. A response corresponds 1:1 with an RP object in a PCRep message. A successful response is a response for which an ERO was successfully computed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdNoPathSent 1.3.6.1.2.1.227.1.3.1.47
The number of unsuccessful responses sent on this session. A response corresponds 1:1 with an RP object in a PCRep message. An unsuccessful response is a response with a NO-PATH object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdCancelSent 1.3.6.1.2.1.227.1.3.1.48
The number of requests received on this session that were canceled by the local PCEP entity sending a PCNtf message. This might be different than pcePcepSessNumPCNtfSent because not all PCNtf messages are used to cancel requests, and a single PCNtf message can cancel multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdErrorSent 1.3.6.1.2.1.227.1.3.1.49
The number of requests received on this session that were rejected by the local PCEP entity sending a PCErr message. This might be different than pcePcepSessNumPCErrSent because not all PCErr messages are used to reject requests, and a single PCErr message can reject multiple requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdCancelRcvd 1.3.6.1.2.1.227.1.3.1.50
The number of requests that were received on this session and explicitly canceled by the peer sending a PCNtf.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumRepRcvdUnknown 1.3.6.1.2.1.227.1.3.1.51
The number of responses to unknown requests received on this session. A response to an unknown request is a response whose RP object does not contain the request ID of any request that is currently outstanding on the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepSessNumReqRcvdUnknown 1.3.6.1.2.1.227.1.3.1.52
The number of unknown requests that have been received on this session. An unknown request is a request whose RP object contains a request ID of zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pcePcepNotificationsMaxRate 1.3.6.1.2.1.227.1.4
This variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period or may queue them until an appropriate time. A value of zero means no notifications are emitted and all should be discarded (that is, not queued).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

pcePcepSessUp 1.3.6.1.2.1.227.0.1
This notification is sent when the value of pcePcepSessState enters the sessionUp state.
Status: current Access: read-write
NOTIFICATION-TYPE    

pcePcepSessDown 1.3.6.1.2.1.227.0.2
This notification is sent when the value of pcePcepSessState leaves the sessionUp state.
Status: current Access: read-write
NOTIFICATION-TYPE    

pcePcepSessLocalOverload 1.3.6.1.2.1.227.0.3
This notification is sent when the local PCEP entity enters overload state for a peer.
Status: current Access: read-write
NOTIFICATION-TYPE    

pcePcepSessLocalOverloadClear 1.3.6.1.2.1.227.0.4
This notification is sent when the local PCEP entity leaves overload state for a peer.
Status: current Access: read-write
NOTIFICATION-TYPE    

pcePcepSessPeerOverload 1.3.6.1.2.1.227.0.5
This notification is sent when a peer enters overload state.
Status: current Access: read-write
NOTIFICATION-TYPE    

pcePcepSessPeerOverloadClear 1.3.6.1.2.1.227.0.6
This notification is sent when a peer leaves overload state.
Status: current Access: read-write
NOTIFICATION-TYPE    

pcePcepCompliances 1.3.6.1.2.1.227.2.1
OBJECT IDENTIFIER    

pcePcepGroups 1.3.6.1.2.1.227.2.2
OBJECT IDENTIFIER    

pcePcepModuleReadOnlyCompliance 1.3.6.1.2.1.227.2.1.1
The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.
Status: current Access: read-write
MODULE-COMPLIANCE    

pcePcepGeneralGroup 1.3.6.1.2.1.227.2.2.1
Objects that apply to all PCEP MIB module implementations.
Status: current Access: read-write
OBJECT-GROUP    

pcePcepNotificationsGroup 1.3.6.1.2.1.227.2.2.2
The notifications for a PCEP MIB module implementation.
Status: current Access: read-write
NOTIFICATION-GROUP