PBC-GENERIC-MIB

File: PBC-GENERIC-MIB.mib (17596 bytes)

Imported modules

IF-MIB PBC-ENT-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

ifIndex InterfaceIndex pbcModuleRegs
pbcManagement pbcCaps OBJECT-GROUP
MODULE-COMPLIANCE TimeTicks Unsigned32
OBJECT-TYPE MODULE-IDENTITY DisplayString
DateAndTime TEXTUAL-CONVENTION

Defined Types

PortType  
The type of data port: 0 = Not Applicable 1 = cableDS (cable downstream) 2 = cableUS (cable upstream physical) 3 = Fast Ethernet 4 = Gigabit Ethernet 5 = 10 Gigabit Ethernet 6 = RS-232 7 = cableUsLogical (cable upstream logical)
TEXTUAL-CONVENTION    
  INTEGER notApplicable(0), cableDS(1), cableUS(2), fastEthernet(3), gigabitEthernet(4), tenGigabitEthernet(5), rs232(6), cableUsLogical(7)  

ChgHistoryDataPath  
Configuration change data's source or destination.
TEXTUAL-CONVENTION    
  INTEGER erase(1), cmdSource(2), startup(3), operational(4), tftp(5), local(6)  

PbcCardIfIndexEntry  
SEQUENCE    
  pbcCardIfCardIndex Unsigned32
  pbcCardIfPortNumber Unsigned32
  pbcCardIfPortType PortType
  pbcCardIfSlotNumber Unsigned32
  pbcCardIfPortIndex Unsigned32

PbcCardEntry  
SEQUENCE    
  pbcCardSlotNumber Unsigned32
  pbcCardEntityIndex Unsigned32
  pbcCardAdminStatus INTEGER
  pbcCardOperStatus INTEGER
  pbcCardUpTime TimeTicks
  pbcCardnvRAMSize Unsigned32
  pbcCardNumPorts Unsigned32
  pbcCardType INTEGER
  pbcCardPosition INTEGER

PbcCardPortEntry  
SEQUENCE    
  pbcCardPortStatus INTEGER
  pbcCardPortEntityIndex Unsigned32
  pbcCardPortAlias DisplayString

PbcPortIfEntry  
SEQUENCE    
  pbcPortIfIndex InterfaceIndex

Defined Values

pbcGenericSystemMib 1.3.6.1.4.1.5987.1.1.1
This module defines management objects which are common to all PBC chassis/system products.
MODULE-IDENTITY    

pbcGeneric 1.3.6.1.4.1.5987.2.1
OBJECT IDENTIFIER    

pbcChassis 1.3.6.1.4.1.5987.2.1.1
OBJECT IDENTIFIER    

pbcChassisEntityIndex 1.3.6.1.4.1.5987.2.1.1.1
entPhysicalIndex of the chassis' entry in the Entity MIB's (RFC2737) entPhysicalTable or '0', if none.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcChassisOperStatus 1.3.6.1.4.1.5987.2.1.1.2
Chassis' current operational status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER operational(1), disabled(3), standby(4), testing(5), failure(6), initializing(7), unconfigured(8)  

pbcChassisSlots 1.3.6.1.4.1.5987.2.1.1.3
Number of slots in this chassis, or '0' if neither applicable nor determinable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcContactInfo 1.3.6.1.4.1.5987.2.1.1.4
Pacific Broadband contact information.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pbcHostName 1.3.6.1.4.1.5987.2.1.1.5
Name of this system.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pbcDomainName 1.3.6.1.4.1.5987.2.1.1.6
Domain name for this host.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pbcDateTimeOfLastChange 1.3.6.1.4.1.5987.2.1.1.7
Date and time of last change to either the configuration or the software.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

pbcCardIfIndexTableNumEntries 1.3.6.1.4.1.5987.2.1.1.8
Number of entries currently in the pbcCardIfIndexTable. This should be the same number as there are entries in the ifTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardIfIndexTable 1.3.6.1.4.1.5987.2.1.1.9
For each ifIndex currently exposed by the system, this table will provide an association to the physical and logical objects which are related to it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PbcCardIfIndexEntry

pbcCardIfIndexEntry 1.3.6.1.4.1.5987.2.1.1.9.1
One ifIndex mapping entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  PbcCardIfIndexEntry  

pbcCardIfCardIndex 1.3.6.1.4.1.5987.2.1.1.9.1.1
Index of the card in the Chassis pbcCardTable which contains this interface or '0' if not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardIfPortNumber 1.3.6.1.4.1.5987.2.1.1.9.1.2
Chassis port number, unique per port on a given card for the same interface type. If pbcCardIfPortNumber is not applicable to the card, then the object instance won't be populated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardIfPortType 1.3.6.1.4.1.5987.2.1.1.9.1.3
The type of port associated with this ifIndex: 0 = Not Applicable 1 = Downstream 2 = Upstream 3 = Fast Ethernet 4 = Gigabit Ethernet 5 = 10 Gigabit Ethernet 6 = RS-232
Status: current Access: read-only
OBJECT-TYPE    
  PortType  

pbcCardIfSlotNumber 1.3.6.1.4.1.5987.2.1.1.9.1.4
Chassis slot number, or '0' if neither applicable nor determinable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardIfPortIndex 1.3.6.1.4.1.5987.2.1.1.9.1.5
The system unique port index number for the physical port associated with this ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardTableNumEntries 1.3.6.1.4.1.5987.2.1.1.10
Number of entries currently in the pbcCardTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardTable 1.3.6.1.4.1.5987.2.1.1.11
Chassis card table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PbcCardEntry

pbcCardEntry 1.3.6.1.4.1.5987.2.1.1.11.1
Installed card types are enumerated here. These entries should not be removed when a card is ejected from the system. The pbcCardOperStatus of the ejected cards should be set to notPreset (8).
Status: current Access: not-accessible
OBJECT-TYPE    
  PbcCardEntry  

pbcCardSlotNumber 1.3.6.1.4.1.5987.2.1.1.11.1.1
Slot number relative to the containing card or chassis, or '0' if neither applicable nor determinable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardEntityIndex 1.3.6.1.4.1.5987.2.1.1.11.1.2
entPhysicalIndex of this card's entry in the Entity MIB's (RFC2737) entPhysicalTable or '0', if none.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardAdminStatus 1.3.6.1.4.1.5987.2.1.1.11.1.3
The desired state of the card. When a card/module initializes, its initial pbcCardAdminStatus is down(2). As a result of either explicit management action or per configuration information retained by the managed system, pbcCardAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state). If a management application writes reset(4) to this object, the card will initiate a full re-initialization.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), reset(4)  

pbcCardOperStatus 1.3.6.1.4.1.5987.2.1.1.11.1.4
The operational status of the card. The pbcCardOperStatus is operational(2) when a card is recognized by the device and is enabled for operation. pbcCardOperStatus is disabled(3) if the card is not recognized by the device, or if it is not enabled for operation. pbcCardOperStatus is standby(4) if the card is enabled and acting as a standby/redundant slave. pbcCardOperStatus is testing (5) when the card is in the diagnostic mode. pbcCardOperStatus is failure (6) if a hardware or software failure is recognized. pbcCardOperStatus is initializing (7) when the card is booting up and not ready to accept any external c onfiguration. pbcCardOperStatus is notPresent (8) if the card has been removed from the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unspecified(1), operational(2), disabled(3), standby(4), testing(5), failure(6), initializing(7), notPresent(8)  

pbcCardUpTime 1.3.6.1.4.1.5987.2.1.1.11.1.5
The value of sysUpTime for this management entity, when this card was last (re-)initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

pbcCardnvRAMSize 1.3.6.1.4.1.5987.2.1.1.11.1.6
Amount of non-volatile RAM in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardNumPorts 1.3.6.1.4.1.5987.2.1.1.11.1.7
Number of ports on this card, or '0' if no ports or not applicable or determinable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardType 1.3.6.1.4.1.5987.2.1.1.11.1.8
The card type of the card. Here are the various types of cards supported: ccm -Chassis Control Module dm - DOCSIS Module nic - Network Interface Module rim - Redundant Rear I/O Module sim - Switching Rear I/O Module There may be one or two cards in one slot - one in front and the other in the rear of the midplane.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ccm(1), dm(2), nic(3), rim(4), sim(5)  

pbcCardPosition 1.3.6.1.4.1.5987.2.1.1.11.1.9
The position of the card relative to the midplane. The pbcCardTable may contain one or two entry per slot. If there are two entries present per slot, then the pbcCardPosition of one should have the value front (2) and the other should have the value rear (2).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER front(1), rear(2)  

pbcCardPortTable 1.3.6.1.4.1.5987.2.1.1.12
Describes the ports on a particular card and their current status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PbcCardPortEntry

pbcCardPortEntry 1.3.6.1.4.1.5987.2.1.1.12.1
Port characteristics comprising an entry in the table. These entries should not be removed when a card is ejected from the system. The pbcCardPortStatus of the ejected cards should be set to notPreset (5).
Status: current Access: not-accessible
OBJECT-TYPE    
  PbcCardPortEntry  

pbcCardPortStatus 1.3.6.1.4.1.5987.2.1.1.12.1.1
The current operational status of this port. pbcCardPortStatus is active(2) when a port is enabled for operation. pbcCardPortStatus is disabled(3) if the port is not enabled for operation. pbcCardPortStatus is standby(4) if the port is on a card is acting as a standby. The pbcCardPortStatus is not-present(5) if the card containing the port has been removed from the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), active(2), standby(3), disabled(4), notPresent(5)  

pbcCardPortEntityIndex 1.3.6.1.4.1.5987.2.1.1.12.1.2
entPhysicalIndex of this port's entry in the Entity MIB's (RFC2737) entPhysicalTable or '0', if none.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pbcCardPortAlias 1.3.6.1.4.1.5987.2.1.1.12.1.3
Alias name for the port as specified by a network manager. On the first instantiation of the interface, the value of the pbcCardPortAlias is zero-length string. When a value is written into an instance of the pbcCardPortAlias through a set operation, then the agent must retain the supplied value as long as the port remains instantiated, including across all re-initializations and reboots of the system.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pbcPortIfTable 1.3.6.1.4.1.5987.2.1.1.13
Lists the interfaces (ifIndex values) associated with a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PbcPortIfEntry

pbcPortIfEntry 1.3.6.1.4.1.5987.2.1.1.13.1
An entry in the pbcPortIfEntry table. For each port number within the system, assigned by the chassis CCM, there is one entry for each IfIndex associated with that port. If no interfaces are associated with this port, then an entry with a portIfIndex value of -1 will appear in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PbcPortIfEntry  

pbcPortIfIndex 1.3.6.1.4.1.5987.2.1.1.13.1.1
ifIndex associated with this port or '-1', if none.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

pbcGenericConformance 1.3.6.1.4.1.5987.2.1.2
OBJECT IDENTIFIER    

pbcGenericGroups 1.3.6.1.4.1.5987.2.1.2.1
OBJECT IDENTIFIER    

pbcChassisGroup 1.3.6.1.4.1.5987.2.1.2.1.1
Objects associated with generic PBC chassis management.
Status: current Access: read-only
OBJECT-GROUP    

pbcGenericCompliance 1.3.6.1.4.1.5987.2.1.2.2
OBJECT IDENTIFIER    

pbcGenericBasicCompliance 1.3.6.1.4.1.5987.2.1.2.2.1
Group support required for basic level compliance.
Status: current Access: read-only
MODULE-COMPLIANCE