PANDATEL-GMD-MODEM-MIB

File: PANDATEL-GMD-MODEM-MIB.mib (12382 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
PANDATEL-MODEM-MIB

Imported symbols

enterprises Gauge DisplayString
OBJECT-TYPE mdmSpecifics device-id

Defined Types

GmdTableEntry  
SEQUENCE    
  mdmRack INTEGER
  mdmModem INTEGER
  mdmPosition INTEGER
  mdmModemName DisplayString
  mdmDataEquipmentEmulation INTEGER
  mdmModemProperty INTEGER
  mdmHDSLUnit INTEGER
  mdmClockSystem INTEGER
  mdmClockSource INTEGER
  mdmDataRate INTEGER
  mdmStartChannel INTEGER
  mdmTimeslot16 INTEGER
  mdmCRC4Generation INTEGER
  mdmHDSLFramer INTEGER
  mdmCRC6Test INTEGER
  mdmPair1CRC6Status INTEGER
  mdmPair1CRC6Error Gauge
  mdmPair2CRC6Status INTEGER
  mdmPair2CRC6Error Gauge
  mdmPair3CRC6Status INTEGER
  mdmPair3CRC6Error Gauge

Defined Values

gmd-modem 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.203
OBJECT IDENTIFIER    

gmd 1.3.6.1.4.1.760.1.1.2.1.10.203
OBJECT IDENTIFIER    

gmdModemTable 1.3.6.1.4.1.760.1.1.2.1.10.203.1
This table contains information about all GM-D modems in all racks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GmdTableEntry

gmdTableEntry 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GmdTableEntry  

mdmRack 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.1
The index of the rack where the modem is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmModem 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.2
This entry displays the slot number where the corresponding modem is installed in the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmPosition 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.3
This entry displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

mdmModemName 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.5
The verbal name of this modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mdmDataEquipmentEmulation 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.6
Interface mode of the unit: 'dte' or 'dce'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), dte(2), dce(3), unknown(99)  

mdmModemProperty 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.7
This entry displays the speed class of the GM-D: 'e1'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), e1(2), t1(3), unknown(99)  

mdmHDSLUnit 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.10
HDSL unit type: Line Termination Unit ('LTU') or Network Termination Unit ('NTU')
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ntu(2), ltu(3)  

mdmClockSystem 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.23
The clock system of the link: 'dual' or 'single'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), dual(2), single(3)  

mdmClockSource 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.24
The clock source of the link: 'internal', 'external', or 'remote'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), internal(2), remote(3), external(4)  

mdmDataRate 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.25
The data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously. A data rate of 2.048 Mbps (E1) automatically disables CRC4, sets mdmStartChannel to 'unframed' and enables time slot 16. A data rate of 1.984 Mbps (E1) automatically sets mdmStartChannel to 'channel-1' and enables time slot 16.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1)  

mdmStartChannel 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.26
This entry determines the start channel for framing. Start channel and data rate must match. A start channel which is too high will be ignored. The remote unit's configuration changes simultaneously.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER channel-1(1), channel-2(2), channel-3(3), channel-4(4), channel-5(5), channel-6(6), channel-7(7), channel-8(8), channel-9(9), channel-10(10), channel-11(11), channel-12(12), channel-13(13), channel-14(14), channel-15(15), channel-16(16), channel-17(17), channel-18(18), channel-19(19), channel-20(20), channel-21(21), channel-22(22), channel-23(23), channel-24(24), channel-25(25), channel-26(26), channel-27(27), channel-28(28), channel-29(29), channel-30(30), channel-31(31), unframed(98), other(99), not-available(100)  

mdmTimeslot16 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.40
This entry enables or disables time slot 16. If it is disabled, it will not be used for data transmission but for framing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3), not-available(100)  

mdmCRC4Generation 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.41
This entry enables or disables the generation of a CRC4 check sum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

mdmHDSLFramer 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.62
This entry enables or disables HDSL framing. The remote unit's configuration changes simultaneously.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

mdmCRC6Test 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.100
This entry enables the execution of a CRC6 test. Write requests with values other than 'start' or 'stop' will be rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(3), stop(4), not-available(100)  

mdmPair1CRC6Status 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.101
This entry indicates the status of the CRC6 test at pair 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), never-started(2), running(5), stopped(6), start-failed(7), not-available(100)  

mdmPair1CRC6Error 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.102
This entry indicates the number of errors detected during the last 60 seconds at pair 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mdmPair2CRC6Status 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.103
This entry indicates the status of the CRC6 test at pair 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), never-started(2), running(5), stopped(6), start-failed(7), not-available(100)  

mdmPair2CRC6Error 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.104
This entry indicates the number of errors detected during the last 60 seconds at pair 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mdmPair3CRC6Status 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.105
This entry indicates the status of the CRC6 test at pair 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), never-started(2), running(5), stopped(6), start-failed(7), not-available(100)  

mdmPair3CRC6Error 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.106
This entry indicates the number of errors detected during the last 60 seconds at pair 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge