PANDATEL-BMZ-MODEM-MIB

File: PANDATEL-BMZ-MODEM-MIB.mib (6093 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
PANDATEL-MODEM-MIB

Imported symbols

enterprises Gauge DisplayString
OBJECT-TYPE mdmSpecifics device-id

Defined Types

BmzTableEntry  
SEQUENCE    
  mdmRack INTEGER
  mdmModem INTEGER
  mdmPosition INTEGER
  mdmModemName DisplayString
  mdmInterfaceEmulationMode INTEGER
  mdmModemProperty INTEGER
  mdmHDSLUnit INTEGER
  mdmClockSystem INTEGER
  mdmClockSource INTEGER
  mdmDataRate INTEGER
  mdmRemoteAccessMode INTEGER

Defined Values

bmz-modem 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.302
OBJECT IDENTIFIER    

bmz 1.3.6.1.4.1.760.1.1.2.1.10.302
OBJECT IDENTIFIER    

bmzModemTable 1.3.6.1.4.1.760.1.1.2.1.10.302.1
This table contains information about all BM-Z converters in all racks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BmzTableEntry

bmzTableEntry 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1
The index of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BmzTableEntry  

mdmRack 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.1
The index of the rack where the converter is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmModem 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.2
This entry displays the slot number where the corresponding converter is installed in the rack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mdmPosition 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.3
This entry displays the location of the corresponding converter: 'local' or 'remote'. The converter which is plugged into a managed rack is 'local', the counterpart is 'remote'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

mdmModemName 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.5
The verbal name of this converter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mdmInterfaceEmulationMode 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.6
Interface mode of the unit: 'dte', 'dce', 'te' or 'nt'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), dte(2), dce(3), te(4), nt(5), unknown(99)  

mdmModemProperty 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.7
This entry displays the speed class of the BM-Z: 'e1'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), e1(2), t1(3), unknown(99)  

mdmHDSLUnit 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.10
HDSL unit type: Line Termination Unit (LTU) or Network Termination Unit (NTU)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), ntu(2), ltu(3)  

mdmClockSystem 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.23
The clock system of the link: 'dual' or 'single'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), dual(2), single(3)  

mdmClockSource 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.24
The clock source of the link: 'internal', 'external', or 'remote'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), internal(2), remote(3), external(4)  

mdmDataRate 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.25
The data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1)  

mdmRemoteAccessMode 1.3.6.1.4.1.760.1.1.2.1.10.302.1.1.64
The remote access mode: 'via-hdsl-channel'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disable(2), via-hdsl-channel(7)