PAIRGAIN-DS1-MIB

File: PAIRGAIN-DS1-MIB.mib (3797 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF PAIRGAIN-COMMON-HD-MIB
SNMPv2-TC IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Gauge32 NOTIFICATION-TYPE
enterprises MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP pgainDSLAM TEXTUAL-CONVENTION
DateAndTime RowStatus InterfaceIndex
ifIndex

Defined Types

Pgds1ConfigEntry  
SEQUENCE    
  pgds1LineIndex InterfaceIndex
  pgds1IfIndex InterfaceIndex
  pgds1LineBuildout INTEGER

Defined Values

pgds1Mib 1.3.6.1.4.1.927.1.9.17
The MIB module for managing PairGain ds1 OIDs within the Avidia System.
MODULE-IDENTITY    

pgds1MibObjects 1.3.6.1.4.1.927.1.9.17.1
OBJECT IDENTIFIER    

pgds1ConfigTable 1.3.6.1.4.1.927.1.9.17.1.1
The pgDS1 Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pgds1ConfigEntry

pgds1ConfigEntry 1.3.6.1.4.1.927.1.9.17.1.1.1
An entry in the DS1 Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Pgds1ConfigEntry  

pgds1LineIndex 1.3.6.1.4.1.927.1.9.17.1.1.1.1
This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs. Previously, this object is the identifier of a DS1 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, number the dsx1LineIndices with an unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g, network side) with odd numbers.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

pgds1IfIndex 1.3.6.1.4.1.927.1.9.17.1.1.1.2
This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
Status: deprecated Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

pgds1LineBuildout 1.3.6.1.4.1.927.1.9.17.1.1.1.3
The length of the ds1 line. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry. 0 0dB 1 -7.5dB 2 -15dB 3 -22.5dB 4 0-133ft 5 133-266ft 6 266-399ft 7 399-533ft 8 533-655ft
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..8