OPTIX-RMON-MIB

Imported modules

OPTIX-OID-MIB	SNMPv2-CONF	SNMPv2-SMI
SNMPv2-TC

Imported symbols

optixCommon	OBJECT-GROUP	MODULE-COMPLIANCE
NOTIFICATION-GROUP	Unsigned32	Counter64
OBJECT-TYPE	MODULE-IDENTITY	NOTIFICATION-TYPE
DateAndTime	TEXTUAL-CONVENTION

Defined Types

PerformanceType
RMON parameters,sorted by ID
TEXTUAL-CONVENTION
	INTEGER	etherStatsPkts64Octets(101), etherStatsPkts65to127Octets(102), etherStatsPkts128to255Octets(103), etherStatsPkts256to511Octets(104), etherStatsPkts512to1023Octets(105), etherStatsPkts1024to1518Octets(106), etherStatsTranPkts64Octets(107), etherStatsTranPkts65to127Octets(108), etherStatsTranPkts128to255Octets(109), etherStatsTranPkts256to511Octets(110), etherStatsTranPkts512to1023Octets(111), etherStatsTranPkts1024to1518Octets(112), etherStatsInUcastPkts(113), etherStatsMulticastPkts(114), etherStatsBroadcastPkts(115), etherStatsOutUcastPkts(116), etherStatsOutMulticastPkts(117), etherStatsOutBroadcastPkts(118), etherStatsInPauseFrames(119), etherStatsOutPauseFrames(120), etherStatsDropEvents(121), etherStatsUndersizePkts(122), etherStatsOversizePkts(123), etherStatsFragments(124), etherStatsJabbers(125), etherStatsInGoodOctets(126), etherStatsOutGoodOctets(127), etherStatsInBadOctets(128), etherStatsOutBadOctets(129), etherStatsCollisions(130), etherStatsAlignmentErrors(131), etherStatsFCSErrors(132), etherStatsSingleCollisionFrames(133), etherStatsMultipleCollisionFrames(134), etherStatsLateCollisions(135), etherStatsExcessiveCollisions(136), etherStatsDeferredTransmissions(137), etherStatsCarrierSenseErrors(138), etherStatsPkts1519toMTUOctets(139), etherStatsTranPkts1519toMTUOctets(140), etherStatsRxTxPkts64Octets(141), etherStatsRxTxPkts65to127Octets(142), etherStatsRxTxPkts128to255Octets(143), etherStatsRxTxPkts256to511Octets(144), etherStatsRxTxPkts512to1023Octets(145), etherStatsRxTxPkts1024to1518Octets(146), etherStatsRxTxPkts1519toMTUOctets(147), etherStatsInControlFrames(194), etherStatsOutControlFrames(195), etherStatsOutDropEvents(196), etherStatsOutOversizePkts(197), etherStatsOutPkts(198), etherStatsOutOctets(199), etherStatsOctets(200), etherStatsPkts(201), etherStatsCRCAlignErrors(202), etherHistoryUtilization(203)

OwnerString
This data type is used to model an administratively assigned name of the owner of a resource. Implementations must accept values composed of well-formed NVT ASCII sequences. In addition, implementations should accept values composed of well-formed UTF-8 sequences. It is suggested that this name contain one or more of the following: IP address, management station name, network manager's name, location, or phone number. In some cases the agent itself will be the owner of an entry. In these cases, this string shall be set to a string starting with 'monitor'. SNMP access control is articulated entirely in terms of the contents of MIB views; access to a particular SNMP object instance depends only upon its presence or absence in a particular MIB view and never upon its value or the value of related object instances. Thus, objects of this type afford resolution of resource contention only among cooperating managers; they realize no access control function with respect to uncooperative parties.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..127)

EtherStatsEntry
SEQUENCE
	etherStatsIndex	Unsigned32
	etherStatsDropEvents	Counter64
	etherStatsOctets	Counter64
	etherStatsPkts	Counter64
	etherStatsBroadcastPkts	Counter64
	etherStatsMulticastPkts	Counter64
	etherStatsCRCAlignErrors	Counter64
	etherStatsUndersizePkts	Counter64
	etherStatsOversizePkts	Counter64
	etherStatsFragments	Counter64
	etherStatsJabbers	Counter64
	etherStatsCollisions	Counter64
	etherStatsPkts64Octets	Counter64
	etherStatsPkts65to127Octets	Counter64
	etherStatsPkts128to255Octets	Counter64
	etherStatsPkts256to511Octets	Counter64
	etherStatsPkts512to1023Octets	Counter64
	etherStatsPkts1024to1518Octets	Counter64

EtherExStatsEntry
SEQUENCE
	etherExStatsIndex	Unsigned32
	etherStatsPkts1519toMTUOctets	Counter64
	etherStatsTranPkts64Octets	Counter64
	etherStatsTranPkts65to127Octets	Counter64
	etherStatsTranPkts128to255Octets	Counter64
	etherStatsTranPkts256to511Octets	Counter64
	etherStatsTranPkts512to1023Octets	Counter64
	etherStatsTranPkts1024to1518Octets	Counter64
	etherStatsTranPkts1519toMTUOctets	Counter64
	etherStatsRxTxPkts64Octets	Counter64
	etherStatsRxTxPkts65to127Octets	Counter64
	etherStatsRxTxPkts128to255Octets	Counter64
	etherStatsRxTxPkts256to511Octets	Counter64
	etherStatsRxTxPkts512to1023Octets	Counter64
	etherStatsRxTxPkts1024to1518Octets	Counter64
	etherStatsRxTxPkts1519toMTUOctets	Counter64
	etherStatsInUcastPkts	Counter64
	etherStatsOutUcastPkts	Counter64
	etherStatsInPauseFrames	Counter64
	etherStatsOutPauseFrames	Counter64
	etherStatsOutMulticastPkts	Counter64
	etherStatsOutBroadcastPkts	Counter64
	etherStatsInGoodOctets	Counter64
	etherStatsOutGoodOctets	Counter64
	etherStatsInBadOctets	Counter64
	etherStatsOutBadOctets	Counter64
	etherStatsAlignmentErrors	Counter64
	etherStatsFCSErrors	Counter64
	etherStatsSingleCollisionFrames	Counter64
	etherStatsMultipleCollisionFrames	Counter64
	etherStatsLateCollisions	Counter64
	etherStatsExcessiveCollisions	Counter64
	etherStatsDeferredTransmissions	Counter64
	etherStatsCarrierSenseErrors	Counter64
	etherStatsInControlFrames	Counter64
	etherStatsOutControlFrames	Counter64
	etherStatsOutDropEvents	Counter64
	etherStatsOutOversizePkts	Counter64
	etherStatsOutPkts	Counter64
	etherStatsOutOctets	Counter64

HistoryControlEntry
SEQUENCE
	historyControlIndex	Unsigned32
	historyControlBucketsRequested	Unsigned32
	historyControlInterval	Unsigned32
	historyControlStatus	INTEGER

EtherHistoryEntry
SEQUENCE
	etherHistoryIndex	Unsigned32
	etherHistorySampleIndex	Unsigned32
	etherHistoryIntervalStart	DateAndTime
	etherHistoryDropEvents	Counter64
	etherHistoryOctets	Counter64
	etherHistoryPkts	Counter64
	etherHistoryBroadcastPkts	Counter64
	etherHistoryMulticastPkts	Counter64
	etherHistoryCRCAlignErrors	Counter64
	etherHistoryUndersizePkts	Counter64
	etherHistoryOversizePkts	Counter64
	etherHistoryFragments	Counter64
	etherHistoryJabbers	Counter64
	etherHistoryCollisions	Counter64
	etherHistoryUtilization	Counter64

EtherExHistoryEntry
SEQUENCE
	etherExHistoryIndex	Unsigned32
	etherExHistorySampleIndex	Unsigned32
	etherExHistoryIntervalStart	DateAndTime
	etherExHistoryInUcastPkts	Counter64
	etherExHistoryOutUcastPkts	Counter64
	etherExHistoryInPauseFrames	Counter64
	etherExHistoryOutPauseFrames	Counter64
	etherExHistoryOutMulticastPkts	Counter64
	etherExHistoryOutBroadcastPkts	Counter64
	etherExHistoryInGoodOctets	Counter64
	etherExHistoryOutGoodOctets	Counter64
	etherExHistoryInBadOctets	Counter64
	etherExHistoryOutBadOctets	Counter64
	etherExHistoryAlignmentErrors	Counter64
	etherExHistoryFCSErrors	Counter64
	etherExHistorySingleCollisionFrames	Counter64
	etherExHistoryMultipleCollisionFrames	Counter64
	etherExHistoryLateCollisions	Counter64
	etherExHistoryExcessiveCollisions	Counter64
	etherExHistoryDeferredTransmissions	Counter64
	etherExHistoryCarrierSenseErrors	Counter64
	etherExHistoryInControlFrames	Counter64
	etherExHistoryOutControlFrames	Counter64
	etherExHistorysOutDropEvents	Counter64
	etherExHistorysOutOversizePkts	Counter64
	etherExHistoryOutPkts	Counter64
	etherExHistoryOutOctets	Counter64

AlarmEntry
SEQUENCE
	alarmIndex	Unsigned32
	alarmVariable	PerformanceType
	alarmInterval	Unsigned32
	alarmSampleType	INTEGER
	alarmStartupAlarm	INTEGER
	alarmRisingThreshold	Unsigned32
	alarmFallingThreshold	Unsigned32
	alarmStatus	INTEGER

Defined Values

optixRmonMib		1.3.6.1.4.1.2011.2.25.3.35
This module describes the private Rmon of Huawei transmit platform.
MODULE-IDENTITY

rmonTraps		1.3.6.1.4.1.2011.2.25.3.35.0
OBJECT IDENTIFIER

trapCommonObjects		1.3.6.1.4.1.2011.2.25.3.35.0.10
OBJECT IDENTIFIER

rptAlarmIndex		1.3.6.1.4.1.2011.2.25.3.35.0.10.10
alarmIndex
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

rptAlarmVariable		1.3.6.1.4.1.2011.2.25.3.35.0.10.20
alarmVariable
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	PerformanceType

rptAlarmSampleType		1.3.6.1.4.1.2011.2.25.3.35.0.10.30
alarmSampleType
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	absoluteValue(1), deltaValue(2)

rptAlarmValue		1.3.6.1.4.1.2011.2.25.3.35.0.10.40
alarmValue
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

rptAlarmRisingThreshold		1.3.6.1.4.1.2011.2.25.3.35.0.10.50
alarmRisingThreshold
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

rptAlarmFallingThreshold		1.3.6.1.4.1.2011.2.25.3.35.0.10.60
alarmFallingThreshold
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

rptAlarmInterval		1.3.6.1.4.1.2011.2.25.3.35.0.10.70
alarmInterval
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

rptAlarmDateTime		1.3.6.1.4.1.2011.2.25.3.35.0.10.80
Date and time.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DateAndTime

optixTrapsRmon		1.3.6.1.4.1.2011.2.25.3.35.0.20
OBJECT IDENTIFIER

rmonRisingAlarm		1.3.6.1.4.1.2011.2.25.3.35.0.20.1
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

rmonFallingAlarm		1.3.6.1.4.1.2011.2.25.3.35.0.20.2
The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

statistics		1.3.6.1.4.1.2011.2.25.3.35.10
OBJECT IDENTIFIER

etherStatsTable		1.3.6.1.4.1.2011.2.25.3.35.10.10
A list of Ethernet statistics entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtherStatsEntry

etherStatsEntry		1.3.6.1.4.1.2011.2.25.3.35.10.10.1
A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
Status: current	Access: not-accessible
OBJECT-TYPE
	EtherStatsEntry

etherStatsIndex		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.1
The value of this object uniquely identifies this etherStats entry. etherStatsIndex of huawei optix devices can be described as following, etherStatsIndex consists of SLOT_ID,PORT_ID and SUB_PORT_ID. etherStatsIndex = SUB_PORT_ID<<31 + SLOT_ID<<24 + PORT_ID; 1) bit31(1bit) SUB_PORT_ID: 0 - SUB_PORT_1(east), 1 - SUB_PORT_2(west), for sonet,this para is 0 ,no other means; 2) 24bit~30bit(7bits) SLOT_ID: slot id; 3) 0bit~15bit(16bits) PORT_ID: mac port id; For example: 1:etherStatsIndex.83886081 (gauge) 83886081 83886081 = 0x05000001 can be translated as Slot-5, Port-1; 2:etherStatsIndex.83886082 (gauge) 83886082 83886082 = 0x05000002 can be translated as Slot-5, Port-2;
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etherStatsDropEvents		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.3
The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOctets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.4
The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.5
The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsBroadcastPkts		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.6
The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsMulticastPkts		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.7
The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsCRCAlignErrors		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.8
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsUndersizePkts		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.9
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOversizePkts		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.10
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsFragments		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.11
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsJabbers		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.12
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsCollisions		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.13
The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts64Octets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.14
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts65to127Octets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.15
The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts128to255Octets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.16
The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts256to511Octets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.17
The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts512to1023Octets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.18
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsPkts1024to1518Octets		1.3.6.1.4.1.2011.2.25.3.35.10.10.1.19
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExStatsTable		1.3.6.1.4.1.2011.2.25.3.35.10.20
A list of Ethernet statistics entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtherExStatsEntry

etherExStatsEntry		1.3.6.1.4.1.2011.2.25.3.35.10.20.1
A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
Status: current	Access: not-accessible
OBJECT-TYPE
	EtherExStatsEntry

etherExStatsIndex		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.1
The value of this object uniquely identifies this etherExStats entry. etherExStatsIndex of huawei optix devices can be described as following, etherExStatsIndex consists of SLOT_ID,PORT_ID and SUB_PORT_ID. etherExStatsIndex = SUB_PORT_ID<<31 + SLOT_ID<<24 + PORT_ID; 1) bit31(1bit) SUB_PORT_ID: 0 - SUB_PORT_1(east), 1 - SUB_PORT_2(west), for sonet,this para is 0 ,no other means; 2) 24bit~30bit(7bits) SLOT_ID: slot id; 3) 0bit~15bit(16bits) PORT_ID: mac port id; For example: 1: etherExStatsIndex.117440513 (gauge) 117440513 117440513 = 0x07000001(hex) can be translated as Slot-7, Port-1; 2: etherExStatsIndex.117440514 (gauge) 117440514 117440514 = 0x07000002 can be translated as Slot-7, Port-2;
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etherStatsPkts1519toMTUOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.3

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts64Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.4

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts65to127Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.5

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts128to255Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.6

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts256to511Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.7

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts512to1023Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.8

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts1024to1518Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.9

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsTranPkts1519toMTUOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.10

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts64Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.11

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts65to127Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.12

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts128to255Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.13

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts256to511Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.14

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts512to1023Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.15

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts1024to1518Octets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.16

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsRxTxPkts1519toMTUOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.17

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsInUcastPkts		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.18

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutUcastPkts		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.19

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsInPauseFrames		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.20

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutPauseFrames		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.21

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutMulticastPkts		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.22

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutBroadcastPkts		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.23

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsInGoodOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.24

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutGoodOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.25

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsInBadOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.26

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutBadOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.27

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsAlignmentErrors		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.28

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsFCSErrors		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.29

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsSingleCollisionFrames		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.30

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsMultipleCollisionFrames		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.31

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsLateCollisions		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.32

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsExcessiveCollisions		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.33

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsDeferredTransmissions		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.34

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsCarrierSenseErrors		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.35

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsInControlFrames		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.36

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutControlFrames		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.37

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutDropEvents		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.38

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutOversizePkts		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.39

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutPkts		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.40

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherStatsOutOctets		1.3.6.1.4.1.2011.2.25.3.35.10.20.1.41

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

history		1.3.6.1.4.1.2011.2.25.3.35.20
OBJECT IDENTIFIER

historyControlTable		1.3.6.1.4.1.2011.2.25.3.35.20.1
A list of history control entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HistoryControlEntry

historyControlEntry		1.3.6.1.4.1.2011.2.25.3.35.20.1.1
A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
Status: current	Access: not-accessible
OBJECT-TYPE
	HistoryControlEntry

historyControlIndex		1.3.6.1.4.1.2011.2.25.3.35.20.1.1.1
An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device. historyControlIndex of huawei optix devices can be described as following, historyControlIndex consists of SLOT_ID,PORT_ID,SUB_PORT_ID and PERIOD_TYPE. historyControlIndex = SUB_PORT_ID<<31 + SLOT_ID<<24 + PERIOD_TYPE<<16 + PORT_ID; 1) 31bit(1bit) SUB_PORT_ID 1bit: 0 - SUB_PORT_1(east), 1 - SUB_PORT_2(west) for sonet,this para is 0 ,no other means; 2) 24bit~30bit(7bits) SLOT_ID: slot id; 3) 16bit~23(8bits) PERIOD_TYPE: period type; 0x1 - 30s(30 seconds) 0x2 - 30m(30 minutes) 0x3 - prdvar(var period) 4) 0bit~15bit(16bits) PORT_ID: mac port id; For example: 1: historyControlIndex.83951617 (gauge) 83951617 83951617 = 0x05010001 can be translated as Slot-5,PrdType-30s,Port-1; 2: historyControlIndex.84017153 (gauge) 84017153 84017153 = 0x05020001 can be translated as Slot-5,PrdType-30m,Port-1; 3: historyControlIndex.84082696 (gauge) 84082696 84082696 = 0x05030008 can be translated as Slot-5,PrdType-prdvar,Port-8;
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

historyControlBucketsRequested		1.3.6.1.4.1.2011.2.25.3.35.20.1.1.3
The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

historyControlInterval		1.3.6.1.4.1.2011.2.25.3.35.20.1.1.5
The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

historyControlStatus		1.3.6.1.4.1.2011.2.25.3.35.20.1.1.7
The status of this historyControl .
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(4)

etherHistoryTable		1.3.6.1.4.1.2011.2.25.3.35.20.2
A list of Ethernet history entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtherHistoryEntry

etherHistoryEntry		1.3.6.1.4.1.2011.2.25.3.35.20.2.1
An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89
Status: current	Access: not-accessible
OBJECT-TYPE
	EtherHistoryEntry

etherHistoryIndex		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.1
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex. etherHistoryIndex of huawei optix devices can be described as following, etherHistoryIndex consists of SLOT_ID,PORT_ID,SUB_PORT_ID and PERIOD_TYPE. etherHistoryIndex = SUB_PORT_ID<<31 + SLOT_ID<<24 + PERIOD_TYPE<<16 + PORT_ID; 1) 31bit(1bit) SUB_PORT_ID 1bit: 0 - SUB_PORT_1(east), 1 - SUB_PORT_2(west) for sonet,this para is 0 ,no other means; 2) 24bit~30bit(7bits) SLOT_ID: slot id; 3) 16bit~23(8bits) PERIOD_TYPE: period type; 0x1 - 30s(30 seconds) 0x2 - 30m(30 minutes) 0x3 - prdvar(var period) 4) 0bit~15bit(16bits) PORT_ID: mac port id; For example: 1: etherHistoryIndex.83951617 (gauge) 83951617 83951617 = 0x05010001 can be translated as Slot-5,PrdType-30s,Port-1; 2: etherHistoryIndex.84017153 (gauge) 84017153 84017153 = 0x05020001 can be translated as Slot-5,PrdType-30m,Port-1; 3: etherHistoryIndex.84082696 (gauge) 84082696 84082696 = 0x05030008 can be translated as Slot-5,PrdType-prdvar,Port-8;
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etherHistorySampleIndex		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etherHistoryIntervalStart		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.3

Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

etherHistoryDropEvents		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.4
The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryOctets		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.5
The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryPkts		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.6
The number of packets (including bad packets) received during this sampling interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryBroadcastPkts		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.7
The number of good packets received during this sampling interval that were directed to the broadcast address.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryMulticastPkts		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.8
The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryCRCAlignErrors		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.9
The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryUndersizePkts		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.10
The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryOversizePkts		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.11
The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryFragments		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.12
The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherHistoryFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryJabbers		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.13
The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryCollisions		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.14
The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherHistoryUtilization		1.3.6.1.4.1.2011.2.25.3.35.20.2.1.15
The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryTable		1.3.6.1.4.1.2011.2.25.3.35.20.3
A list of Exetend Ethernet history entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtherExHistoryEntry

etherExHistoryEntry		1.3.6.1.4.1.2011.2.25.3.35.20.3.1
A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
Status: current	Access: not-accessible
OBJECT-TYPE
	EtherExHistoryEntry

etherExHistoryIndex		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.1
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex. etherExHistoryIndex of huawei optix devices can be described as following, etherExHistoryIndex consists of SLOT_ID,PORT_ID,SUB_PORT_ID and PERIOD_TYPE. etherExHistoryIndex = SUB_PORT_ID<<31 + SLOT_ID<<24 + PERIOD_TYPE<<16 + PORT_ID; 1) 31bit(1bit) SUB_PORT_ID 1bit: 0 - SUB_PORT_1(east), 1 - SUB_PORT_2(west) for sonet,this para is 0 ,no other means; 2) 24bit~30bit(7bits) SLOT_ID: slot id; 3) 16bit~23(8bits) PERIOD_TYPE: period type; 0x1 - 30s(30 seconds) 0x2 - 30m(30 minutes) 0x3 - prdvar(var period) 4) 0bit~15bit(16bits) PORT_ID: mac port id; For example: 1: etherExHistoryIndex.83951617 (gauge) 83951617 83951617 = 0x05010001 can be translated as Slot-5,PrdType-30s,Port-1; 2: etherExHistoryIndex.84017153 (gauge) 84017153 84017153 = 0x05020001 can be translated as Slot-5,PrdType-30m,Port-1; 3: etherExHistoryIndex.84082696 (gauge) 84082696 84082696 = 0x05030008 can be translated as Slot-5,PrdType-prdvar,Port-8;
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etherExHistorySampleIndex		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etherExHistoryIntervalStart		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.3

Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

etherExHistoryInUcastPkts		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.4

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutUcastPkts		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.5

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryInPauseFrames		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.6

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutPauseFrames		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.7

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutMulticastPkts		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.8

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutBroadcastPkts		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.9

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryInGoodOctets		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.10

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutGoodOctets		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.11

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryInBadOctets		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.12

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutBadOctets		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.13

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryAlignmentErrors		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.14

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryFCSErrors		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.15

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistorySingleCollisionFrames		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.16

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryMultipleCollisionFrames		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.17

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryLateCollisions		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.18

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryExcessiveCollisions		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.19

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryDeferredTransmissions		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.20

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryCarrierSenseErrors		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.21

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryInControlFrames		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.22

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutControlFrames		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.23

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistorysOutDropEvents		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.24

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistorysOutOversizePkts		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.25

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutPkts		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.26

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

etherExHistoryOutOctets		1.3.6.1.4.1.2011.2.25.3.35.20.3.1.27

Status: current	Access: read-only
OBJECT-TYPE
	Counter64

alarm		1.3.6.1.4.1.2011.2.25.3.35.30
OBJECT IDENTIFIER

alarmTable		1.3.6.1.4.1.2011.2.25.3.35.30.1
A list of alarm entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AlarmEntry

alarmEntry		1.3.6.1.4.1.2011.2.25.3.35.30.1.1
A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
Status: current	Access: not-accessible
OBJECT-TYPE
	AlarmEntry

alarmIndex		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.1
An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. alarmIndex of huawei optix devices can be described as following, alarmIndex consists of SLOT_ID,PORT_ID and SUB_PORT_ID. alarmIndex = SUB_PORT_ID<<31 + SLOT_ID<<24 + PORT_ID; 1) bit31(1bit) SUB_PORT_ID: 0 - SUB_PORT_1(east), 1 - SUB_PORT_2(west), for sonet,this para is 0 ,no other means; 2) 24bit~30bit(7bits) SLOT_ID: slot id; 3) 0bit~15bit(16bits) PORT_ID: mac port id; For example: 1:alarmIndex.83886081.122 (gauge) 83886081 83886081 = 0x05000001 can be translated as Slot-5, Port-1; 2:alarmIndex.83886082.122 (gauge) 83886082 83886082 = 0x05000002 can be translated as Slot-5, Port-2;
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

alarmVariable		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.2

Status: current	Access: read-only
OBJECT-TYPE
	PerformanceType

alarmInterval		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.3

Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

alarmSampleType		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.4

Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	absoluteValue(1), deltaValue(2)

alarmStartupAlarm		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.6
The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	risingAlarm(1), fallingAlarm(2), risingOrFallingAlarm(3)

alarmRisingThreshold		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.7
A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

alarmFallingThreshold		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.8
A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

alarmStatus		1.3.6.1.4.1.2011.2.25.3.35.30.1.1.12
The status of this alarm variable.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(4)

optixRmonMibConformance		1.3.6.1.4.1.2011.2.25.3.35.40
OBJECT IDENTIFIER

optixRmonMibGroups		1.3.6.1.4.1.2011.2.25.3.35.40.1
OBJECT IDENTIFIER

optixRmonMibObjectGroup		1.3.6.1.4.1.2011.2.25.3.35.40.1.1
Enter the description of the created OBJECT-GROUP.
Status: current	Access: read-create
OBJECT-GROUP

optixRmonMibNotificationGroup		1.3.6.1.4.1.2011.2.25.3.35.40.1.2
Enter the description of the created NOTIFICATION-GROUP.
Status: current	Access: read-create
NOTIFICATION-GROUP

optixRmonMibCompliances		1.3.6.1.4.1.2011.2.25.3.35.40.2
OBJECT IDENTIFIER

optixRmonMibBasicCompliance		1.3.6.1.4.1.2011.2.25.3.35.40.2.1
Enter the description of the created MODULE-COMPLIANCE.
Status: current	Access: read-create
MODULE-COMPLIANCE