OPLINK-BTI-OPS-MIB
File:
OPLINK-BTI-OPS-MIB.mib (31143 bytes)
Imported modules
Imported symbols
Defined Types
HeTenthdB |
|
This data type represents power discrepancy levels
that are normally expressed in dB. Units
are in tenths of a dB;
for example, -5.1 dB will be represented as -51. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
HeTenthdBm |
|
This data type represents power levels
that are normally expressed in dBm. Units
are in tenths of a dBm;
for example, -5.1 dBm will be represented as -51. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
HeTenthmA |
|
This data type represents laser bias current threshold
that are normally expressed in mA. Units
are in tenths of a mA;
for example, -5.1 mA will be represented as -51. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
HeTenthmV |
|
This data type represents pump voltage
that are normally expressed in mA. Units
are in tenths of a mV;
for example, -5.1 mV will be represented as -51. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
HeTenthCentigrade |
|
This data type represents Temperature Threshold
that are normally expressed in mA. Units
are in tenths of a C.
for example, -5.1 C will be represented as -51. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
EmuEntry |
|
SEQUENCE |
|
|
|
|
emuChassisId |
Integer32 |
|
|
emuSlotId |
Integer32 |
|
|
emuItemId |
Integer32 |
|
|
emuMfgName |
DisplayString |
|
|
emuModuleType |
DisplayString |
|
|
emuPartNum |
DisplayString |
|
|
emuSerialNum |
DisplayString |
|
|
emuMfgDate |
DisplayString |
|
|
emuCaliDate |
DisplayString |
|
|
emuFirmwareVer |
DisplayString |
|
|
emuHardwareVer |
DisplayString |
|
|
emuVendorID |
DisplayString |
|
|
emuSysDate |
DisplayString |
|
|
emuSysTime |
DisplayString |
|
|
emuIpAddr |
DisplayString |
|
|
emuNetMask |
DisplayString |
|
|
emuGateway |
DisplayString |
|
|
emuMacAddr |
DisplayString |
|
|
emuUptime |
Integer32 |
|
|
emuBoardTemp |
HeTenthCentigrade |
|
|
emuHighTemperatureThreshold |
HeTenthCentigrade |
|
|
emuLowTemperatureThreshold |
HeTenthCentigrade |
|
|
emuGetModConfig |
DisplayString |
|
|
emuDelModConfig |
DisplayString |
|
|
emuAddModConfig |
DisplayString |
|
|
emuSaveConfig |
DisplayString |
|
|
emuRestoreDefault |
DisplayString |
|
|
emuReset |
DisplayString |
|
|
emuFirmwareUpgradeStart |
DisplayString |
|
|
emuFirmwareUpgradeStatus |
DisplayString |
|
|
emuGetSNMPConfig |
OCTET STRING |
|
|
emuDelSNMPConfig |
OCTET STRING |
|
|
emuAddSNMPConfig |
OCTET STRING |
|
|
emuGetCurrentAlarm |
OCTET STRING |
|
|
emuGetHisAlarm |
DisplayString |
|
OPSMEntry |
|
SEQUENCE |
|
|
|
|
opsmChassisId |
Integer32 |
|
|
opsmSlotId |
Integer32 |
|
|
opsmItemId |
Integer32 |
|
|
opsmMfgName |
DisplayString |
|
|
opsmPartNum |
DisplayString |
|
|
opsmSerialNum |
DisplayString |
|
|
opsmMfgDate |
DisplayString |
|
|
opsmCaliDate |
DisplayString |
|
|
opsmHardwareVer |
DisplayString |
|
|
opsmVendorID |
DisplayString |
|
|
opsmModuleType |
DisplayString |
|
|
opsmFirmwareVer |
DisplayString |
|
|
opsmReset |
Integer32 |
|
|
opsmProtectionMode |
Integer32 |
|
|
opsmRevertiveSetting |
Integer32 |
|
|
opsmDiffSwitchSetting |
Integer32 |
|
|
opsmDiffAlarmThreshold |
HeTenthdBm |
|
|
opsmDiffSwitchThreshold |
HeTenthdBm |
|
|
opsmInherentDiffOffset |
HeTenthdBm |
|
|
opsmWTRTime |
Integer32 |
|
|
opsmSwitchStatus |
Integer32 |
|
|
opsmSwitchPosition |
Integer32 |
|
|
opsmInputLosAlarmThrPathP |
HeTenthdBm |
|
|
opsmInputLosAlarmThrPathS |
HeTenthdBm |
|
|
opsmInputLosAlarmHys |
HeTenthdBm |
|
|
opsmInputPowerPathP |
Integer32 |
|
|
opsmInputPowerPathS |
Integer32 |
|
|
opsmSwitchCount |
Integer32 |
|
Defined Values
deviceOPSMv2-MIB |
1.3.6.1.4.1.19547.1.7 |
oplink device OPSM version 2 mib |
MODULE-IDENTITY |
|
|
|
version2 |
1.3.6.1.4.1.19547.1.7.1 |
OBJECT IDENTIFIER |
|
|
|
emuTable |
1.3.6.1.4.1.19547.1.7.1.1 |
controller card parameters |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
EmuEntry |
|
emuEntry |
1.3.6.1.4.1.19547.1.7.1.1.1 |
Row definition for emuTable |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EmuEntry |
|
|
emuChassisId |
1.3.6.1.4.1.19547.1.7.1.1.1.1001 |
chassis index |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..32 |
|
emuSlotId |
1.3.6.1.4.1.19547.1.7.1.1.1.1002 |
slot index |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..32 |
|
emuItemId |
1.3.6.1.4.1.19547.1.7.1.1.1.1003 |
port/channel index |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..32 |
|
emuMfgName |
1.3.6.1.4.1.19547.1.7.1.1.1.1 |
Manufacturer name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuPartNum |
1.3.6.1.4.1.19547.1.7.1.1.1.3 |
Part Number. Can be any combination of alphanumerical characters. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuSerialNum |
1.3.6.1.4.1.19547.1.7.1.1.1.4 |
Serial number. Can be any combination of alphanumerical characters. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..10) |
|
emuMfgDate |
1.3.6.1.4.1.19547.1.7.1.1.1.5 |
Manufacturing date. The format is yyyy-mm-dd. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuCaliDate |
1.3.6.1.4.1.19547.1.7.1.1.1.6 |
Manufacturing date. The format is yyyy-mm-dd |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuFirmwareVer |
1.3.6.1.4.1.19547.1.7.1.1.1.7 |
Software version. The format is X.Y.Z |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuHardwareVer |
1.3.6.1.4.1.19547.1.7.1.1.1.8 |
Hardware version. The format is X.Y.Z |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuVendorID |
1.3.6.1.4.1.19547.1.7.1.1.1.9 |
Vendor ID. The ID number of vendor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuSysDate |
1.3.6.1.4.1.19547.1.7.1.1.1.10 |
System date. The format is YYYY-MM-DD |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(10) |
|
emuSysTime |
1.3.6.1.4.1.19547.1.7.1.1.1.11 |
System time. The format is HH:MM:SS |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(10) |
|
emuIpAddr |
1.3.6.1.4.1.19547.1.7.1.1.1.12 |
IP address. The format is aaa.bbb.ccc.ddd |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(10..15) |
|
emuNetMask |
1.3.6.1.4.1.19547.1.7.1.1.1.13 |
Netmask. The format is aaa.bbb.ccc.ddd |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(10..15) |
|
emuGateway |
1.3.6.1.4.1.19547.1.7.1.1.1.14 |
Gateway. The format is aaa.bbb.ccc.ddd |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(10..15) |
|
emuMacAddr |
1.3.6.1.4.1.19547.1.7.1.1.1.15 |
Mac address. The format is aa:bb:cc:dd:ee:ff |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(18) |
|
emuUptime |
1.3.6.1.4.1.19547.1.7.1.1.1.16 |
Uptime. System uptime (Unit: s) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
emuBoardTemp |
1.3.6.1.4.1.19547.1.7.1.1.1.17 |
BoardTemp. Get temperature of EMU card(Unit: 0.1 degree celsius) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HeTenthCentigrade |
|
|
emuHighTemperatureThreshold |
1.3.6.1.4.1.19547.1.7.1.1.1.18 |
HighTempThreshold. Get/Set high temperature threshold value of EMU card(Unit: 0.1 degree celsuis),
range:550~750 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HeTenthCentigrade |
|
|
emuLowTemperatureThreshold |
1.3.6.1.4.1.19547.1.7.1.1.1.19 |
LowTempThreshold. Get/Set low temperature threshold value of EMU card(Unit: 0.1 degree celsius),
range:-250~0 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HeTenthCentigrade |
|
|
emuGetModConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.20 |
GetModConfig. Get current OPSM module config.
format: OPSM.PA600/OPSM.BA |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuDelModConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.21 |
DelModConfig.
get: return a blank character
set: Delete current OPSM module config.
format: OPSM.PA600/OPSM.BA |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..20) |
|
emuAddModConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.22 |
AddModConfig.
get: return a blank character
set: Add OPSM module config,
format: OPSM.PA600/OPSM.BA |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..20) |
|
emuSaveConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.23 |
SaveConfig.
get: return a blank character
set: parameter is null. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0) |
|
emuRestoreDefault |
1.3.6.1.4.1.19547.1.7.1.1.1.24 |
RestoreDefault.
get: return a blank character
set: parameter is null. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0) |
|
emuReset |
1.3.6.1.4.1.19547.1.7.1.1.1.25 |
Reset.
get: return a blank character
set: parameter is null. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0) |
|
emuFirmwareUpgradeStart |
1.3.6.1.4.1.19547.1.7.1.1.1.40 |
FirmwareUpgradeStart.
get: return a blank character
set: The name of the upgrade iamge which must be upload
to the /var/ftp directory before do this operation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..100) |
|
emuFirmwareUpgradeStatus |
1.3.6.1.4.1.19547.1.7.1.1.1.41 |
FirmwareUpgradeStatus. The status and percent of upgrade
format: [status], [percent]
status:0--none upgrade, 1--in progress, 2--upgrade successful, others-upgrade error code
percent:1-100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emuGetSNMPConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.50 |
Get all snmp users' information.
format:[Version] [Trap on/off] [IP] [Port] [Community/Username] [Access/Level]...
Version:v1|v2c|v3
Trap on/off:trap|notrap
Access:Read|Write
level:noauth|authNoPriv MD5/SHA|authPriv MD5/SHA DES/AES |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1200) |
|
emuDelSNMPConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.51 |
Delete snmp user.
get: return a blank character
set: v1 or v2c format:[version] [IP] [Community]
v3 format: [version] [username]
Version:v1|v2c|v3
Community/Username:6-15 characters
IP:xxx.xxx.xxx.xxx |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..40) |
|
emuAddSNMPConfig |
1.3.6.1.4.1.19547.1.7.1.1.1.52 |
Add snmp user.
get: return a blank character
set: v1 or v2c format:[Version] [Trap on/off] [IP] [Port] [Community] [Access]
v3 format:[Version] [Trap on/off] [IP] [Port] [Username] [Access] [EngineID] [Level] [Auth protocol] [AuthKey]
[Priv protocal] [PrivKey]
Version:v1|v2c|v3
Trap on/off:trap|notrap
IP:xxx.xxx.xxx.xxx
Port:0-65535
Community/Username:6-15 characters
Access:r|w (r:read;w:write)
EngineID:0x(10-128) characters
Level:AuthPriv|AuthNoPriv|noAuthNoPriv
Auth protocol:MD5|SHA
AuthKey:8-15 characters
Priv protocal:DES|AES
PrivKey:8-15 characters |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..200) |
|
emuGetCurrentAlarm |
1.3.6.1.4.1.19547.1.7.1.1.1.60 |
Current alarm. The current alarm of system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
emuGetHisAlarm |
1.3.6.1.4.1.19547.1.7.1.1.1.61 |
History alarm. Full directory of history alarm file. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..100) |
|
opsmTable |
1.3.6.1.4.1.19547.1.7.1.2 |
OPSM parameters |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
OPSMEntry |
|
opsmEntry |
1.3.6.1.4.1.19547.1.7.1.2.1 |
Row definition for opsmTable |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
OPSMEntry |
|
|
opsmChassisId |
1.3.6.1.4.1.19547.1.7.1.2.1.1001 |
chassis index |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..32 |
|
opsmSlotId |
1.3.6.1.4.1.19547.1.7.1.2.1.1002 |
slot index |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..32 |
|
opsmItemId |
1.3.6.1.4.1.19547.1.7.1.2.1.1003 |
port/channel index |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..32 |
|
opsmMfgName |
1.3.6.1.4.1.19547.1.7.1.2.1.1 |
Manufacturer name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmPartNum |
1.3.6.1.4.1.19547.1.7.1.2.1.2 |
Part Number. Can be any combination of alphanumerical characters. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmSerialNum |
1.3.6.1.4.1.19547.1.7.1.2.1.3 |
Serial number. Can be any combination of alphanumerical characters. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmMfgDate |
1.3.6.1.4.1.19547.1.7.1.2.1.4 |
Manufacturing date. The format is yyyy-mm-dd.
yyyy-1st and 2nd bytes. mm-3rd byte, dd-4th byte |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmCaliDate |
1.3.6.1.4.1.19547.1.7.1.2.1.5 |
Manufacturing date. The format is yyyy-mm-dd.
yyyy-1st and 2nd bytes. mm-3rd byte, dd-4th byte |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmHardwareVer |
1.3.6.1.4.1.19547.1.7.1.2.1.6 |
Hardware version. The format is X.Y.Z |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmVendorID |
1.3.6.1.4.1.19547.1.7.1.2.1.7 |
Vendor ID. The ID number of vendor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmFirmwareVer |
1.3.6.1.4.1.19547.1.7.1.2.1.9 |
Software version. The format is X.Y.Z |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
opsmReset |
1.3.6.1.4.1.19547.1.7.1.2.1.10 |
0: hard reset,
1: soft reset. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmProtectionMode |
1.3.6.1.4.1.19547.1.7.1.2.1.20 |
The mode of protection switch.
0: clear,
1: force to primary,
2: force to secondary. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmRevertiveSetting |
1.3.6.1.4.1.19547.1.7.1.2.1.21 |
The action when the opticial of primary channel is resumed.
0: Non-Revertive,
1: Revertive. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmDiffSwitchSetting |
1.3.6.1.4.1.19547.1.7.1.2.1.22 |
Enable or disable the function of input power different detection.
0: Disable,
1: Enable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmDiffAlarmThreshold |
1.3.6.1.4.1.19547.1.7.1.2.1.23 |
Get/Set Input optical power different alarm threshold between primary and secondary,
default:10,(Unit:0.1dBm),range: 0--100 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HeTenthdBm |
|
|
opsmDiffSwitchThreshold |
1.3.6.1.4.1.19547.1.7.1.2.1.24 |
Get/Set Input optical power switching threshold between primary and secondary,
default:20,(Unit:0.1dBm),range: 0--100 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HeTenthdBm |
|
|
opsmInherentDiffOffset |
1.3.6.1.4.1.19547.1.7.1.2.1.25 |
Get/Set Input Optical Power different Offset between
primary and secondary,default:0,(Unit:0.1dBm),range: -300--300 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HeTenthdBm |
|
|
opsmWTRTime |
1.3.6.1.4.1.19547.1.7.1.2.1.26 |
Used in conjunction with PortID to access WTR time:
default:5,(Unit:1s),range: 1--720 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmSwitchStatus |
1.3.6.1.4.1.19547.1.7.1.2.1.27 |
The status of protection switch.
0: IDLE,
1: WTR,
2: Auto,
3: SF_ALL,
4: N/A,
5: Forced. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmSwitchPosition |
1.3.6.1.4.1.19547.1.7.1.2.1.28 |
The position of switch.
0: Secondary
1: Primary |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
opsmSwitchCount |
1.3.6.1.4.1.19547.1.7.1.2.1.45 |
Times the switch has changed its position. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
oplkV6Traps |
1.3.6.1.4.1.19547.1.7.1.1001 |
OBJECT IDENTIFIER |
|
|
|
oplinkTrapCode |
1.3.6.1.4.1.19547.1.7.1.1002 |
This object describes oplink trap. It contains information about
chassis, slot, port, device type (card type) and specific error
code. When get, return 0 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
oplinkemuTemperatureAbnormal |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.1 |
This trap signifies that emu temperature is exceess or bellow normal
temperature range. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuTemperatureResume |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.2 |
This trap signifies that emu temperature abnormal alarm is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuFanRemove |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.3 |
This trap signifies that emu fan card is removed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuFanInsert |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.4 |
This trap signifies that emu fan remove alarm is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuPowerRemove |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.5 |
This trap signifies that emu power card is removed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuPowerInsert |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.6 |
This trap signifies that emu power remove alarm is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuVoltageAbnormal |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.7 |
This trap signifies that emu voltage is exceess or bellow normal
voltage range. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuVoltageResume |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.8 |
This trap signifies that emu voltage abnormal alarm is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuSubCardDelete |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.9 |
This trap signifies that emu sub-card is delete. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuSubCardAdd |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.10 |
This trap signifies that emu sub-card delete alarm is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuSubCardUnmatch |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.11 |
This trap signifies that emu sub-card is unmatch with the configuration. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkemuSubCardMatch |
1.3.6.1.4.1.19547.1.7.1.1001.1.0.12 |
This trap signifies that emu sub-card unmatch alarm is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmPowerDiffChannel1 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.9 |
This trap signifies that opsm input power different alarm on CH1 is on. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmPowerDiffResumeChannel1 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.10 |
This trap signifies that opsm input power different alarm on CH1 is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmPowerDiffChannel2 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.11 |
This trap signifies that opsm input power different alarm on CH2 is on. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmPowerDiffResumeChannel2 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.12 |
This trap signifies that opsm input power different alarm on CH2 is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmSwitchFailChannel1 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.13 |
This trap signifies that opsm switch fail alarm on CH1 is on. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmSwitchSuccessChannel1 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.14 |
This trap signifies that opsm switch fail alarm on CH1 is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmSwitchFailChannel2 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.15 |
This trap signifies that opsm switch fail alarm on CH2 is on. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
oplinkopsmSwitchSuccessChannel2 |
1.3.6.1.4.1.19547.1.7.1.1001.2.0.16 |
This trap signifies that opsm switch fail alarm on CH2 is clear. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|