ONEACCESS-OAM-MIB

File: ONEACCESS-OAM-MIB.mib (17319 bytes)

Imported modules

SNMPv2-SMI	RFC1213-MIB	SNMPv2-CONF
SNMPv2-TC	IF-MIB	ATM-MIB
ONEACCESS-GLOBAL-REG

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Counter32
Unsigned32	Integer32	IpAddress
DisplayString	MODULE-COMPLIANCE	OBJECT-GROUP
TimeStamp	TimeInterval	InterfaceIndex
ifIndex	atmVclEntry	oacExpIMAtmOamStatistics
oacMIBModules

Defined Types

OacAtmOamVclEntry
SEQUENCE
	oacAtmOamVclPvcManage	INTEGER
	oacAtmOamVclSegmentLoopback	INTEGER
	oacAtmOamVclEndLoopback	INTEGER
	oacAtmOamVclAisRdiEnable	INTEGER
	oacAtmOamVclSegmentContinuityCheckEnable	INTEGER
	oacAtmOamVclEndContinuityCheckEnable	INTEGER
	oacAtmOamVclLoopbackTxInterval	Integer32
	oacAtmOamVclLoopbackTxRetryFrequency	Integer32
	oacAtmOamVclLoopbackTxRetryUpCount	Integer32
	oacAtmOamVclLoopbackTxRetryDownCount	Integer32
	oacAtmOamVclAlarmState	Integer32
	oacAtmOamVclAlarmStateLastChange	TimeStamp
	oacAtmOamVclAisRdiRetryDownCount	Integer32
	oacAtmOamVclAisRdiRetryUpTimer	Integer32
	oacAtmOamVclPvcIntrusive	INTEGER

OacAtmOamVclCountersEntry
SEQUENCE
	oacAtmOamVclOamCellsReceived	Counter32
	oacAtmOamVclEndLoopbackIn	Counter32
	oacAtmOamVclSegLoopbackIn	Counter32
	oacAtmOamVclEndLoopIn	Counter32
	oacAtmOamVclSegLoopIn	Counter32
	oacAtmOamVclAisIn	Counter32
	oacAtmOamVclRdiIn	Counter32
	oacAtmOamVclSegCCIn	Counter32
	oacAtmOamVclEndCCIn	Counter32
	oacAtmOamVclOamCellsSent	Counter32
	oacAtmOamVclEndLoopbackOut	Counter32
	oacAtmOamVclSegLoopbackOut	Counter32
	oacAtmOamVclEndLoopOut	Counter32
	oacAtmOamVclSegLoopOut	Counter32
	oacAtmOamVclAisOut	Counter32
	oacAtmOamVclRdiOut	Counter32
	oacAtmOamVclSegCCOut	Counter32
	oacAtmOamVclEndCCOut	Counter32
	oacAtmOamVclOamCellsDropped	Counter32

Defined Values

oacOamMIBModule		1.3.6.1.4.1.13191.1.100.673
Contact updated
MODULE-IDENTITY

oacAtmOamStatObjects		1.3.6.1.4.1.13191.10.3.2.2.1
OBJECT IDENTIFIER

oacAtmOamStatNotifications		1.3.6.1.4.1.13191.10.3.2.2.2
OBJECT IDENTIFIER

oacAtmOamStatConformance		1.3.6.1.4.1.13191.10.3.2.2.3
OBJECT IDENTIFIER

oacAtmOamStatSwitch		1.3.6.1.4.1.13191.10.3.2.2.1.1
OBJECT IDENTIFIER

oacAtmOamSwitchMaxConnections		1.3.6.1.4.1.13191.10.3.2.2.1.1.1
Maximum number of authorised OAM configured connections
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

oacAtmOamSwitchSegLoopback		1.3.6.1.4.1.13191.10.3.2.2.1.1.2
Enable segment loopback on this switch
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamSwitchEndLoopback		1.3.6.1.4.1.13191.10.3.2.2.1.1.3
Enable end to end loopback on this switch
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamSwitchAisRdiEnable		1.3.6.1.4.1.13191.10.3.2.2.1.1.4
Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received, or if a defect is detected on the switch
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamSwitchSegmentContinuityCheckEnable		1.3.6.1.4.1.13191.10.3.2.2.1.1.5
Enable Segment Loss of Continuity cells defect on the pvc. Enable generation of segment Continuity Check cells on the switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamSwitchEndContinuityCheckEnable		1.3.6.1.4.1.13191.10.3.2.2.1.1.6
Enable End to End Loss of Continuity cells defect on the pvc. Enable generation of End to End Continuity Check cells on the switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamSwitchOamCellsReceived		1.3.6.1.4.1.13191.10.3.2.2.1.1.7
Number of received OAM cells on the switch
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamSwitchOamCellsTransmitted		1.3.6.1.4.1.13191.10.3.2.2.1.1.8
Number of transmitted OAM cells on the switch
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamSwitchCurrentConnections		1.3.6.1.4.1.13191.10.3.2.2.1.1.9
Current number of OAM configured connections
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

oacAtmOamVclTable		1.3.6.1.4.1.13191.10.3.2.2.1.2
An index into the table oacAtmOamVclTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OacAtmOamVclEntry

oacAtmOamVclEntry		1.3.6.1.4.1.13191.10.3.2.2.1.2.1
An index into the table oacAtmOamVclTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OacAtmOamVclEntry

oacAtmOamVclPvcManage		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.1
Enable OAM for Pvc management
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclSegmentLoopback		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.2
Enable segment loopback on this virtual channel
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclEndLoopback		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.3
Enable end to end loopback on this virtual channel
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclAisRdiEnable		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.4
Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received, or if a defect is detected on the PVC
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclSegmentContinuityCheckEnable		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.5
Enable Segment Loss of Continuity cells detect on the PVC.Enable generation of Segment Continuity Check cells on the PVC.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclEndContinuityCheckEnable		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.6
Enable End to End Loss of Continuity cells detect on the PVC.Enable generation of End to End Continuity Check cells on the PVC.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclLoopbackTxInterval		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.7
Frequency of OAM loopback cell are generated on this virtual channel
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclLoopbackTxRetryFrequency		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.8
Frequency of OAM loopback cell are generated on this virtual channel, when a change has occured, that is to say either no reception of the last loopback cell, or reception of the last loopback cell
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclLoopbackTxRetryUpCount		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.9
Counter of consecutive received loopback cells, before vcl is considered as being up
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclLoopbackTxRetryDownCount		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.10
Counter of consecutive non received loopback cells, before vcl is considered as being down
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclAlarmState		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.11
This object indicates the current alarm status of the VCL, when error monitoring is activated on the VCL. Value indicates the different alarm states tha the VCL can take. Those alarms can be combined together. The unknown state indicates that the alarm status of this VCL cannot be determined. cc_seg_loc(1),cc_ete_loc(2), lb_seg_alarm(4),lb_ete_alarm(8), ais_alarm(16),rdi_alarm(32),other(64)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclAlarmStateLastChange		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.12
The value of sysUpTime object at the time this VCL entered its current alarm status. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

oacAtmOamVclAisRdiRetryDownCount		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.13
Number of consecutive OAM AIS/RDI cells received. The range is 3 to 60. The default is 3.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclAisRdiRetryUpTimer		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.14
Number of seconds with no OAM AIS/RDI cells received. The range is 3 to 60 seconds . The default is 3 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oacAtmOamVclPvcIntrusive		1.3.6.1.4.1.13191.10.3.2.2.1.2.1.15
Enable OAM Intrusivity against Pvc
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

oacAtmOamVclCountersTable		1.3.6.1.4.1.13191.10.3.2.2.1.3
An index into table oacAtmOamVclCountersTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OacAtmOamVclCountersEntry

oacAtmOamVclCountersEntry		1.3.6.1.4.1.13191.10.3.2.2.1.3.1
An index into table oacAtmOamVclCountersTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OacAtmOamVclCountersEntry

oacAtmOamVclOamCellsReceived		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.1
Number of received oam cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclEndLoopbackIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.2
Number of received non looped end to end oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclSegLoopbackIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.3
Number of received non looped segment oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclEndLoopIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.4
Number of received looped end to end oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclSegLoopIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.5
Number of received looped segment oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclAisIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.6
Number of received oam ais cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclRdiIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.7
Number of received oam rdi cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclSegCCIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.8
Number of received oam end to end continuity check cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclEndCCIn		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.9
Number of received oam segment continuity check cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclOamCellsSent		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.10
Number of sent oam cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclEndLoopbackOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.11
Number of sent non looped end to end oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclSegLoopbackOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.12
Number of sent non looped segment oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclEndLoopOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.13
Number of sent looped end to end oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclSegLoopOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.14
Number of sent looped segment oam loopback cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclAisOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.15
Number of sent oam ais cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclRdiOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.16
Number of sent oam rdi cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclSegCCOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.17
Number of sent oam end to end continuity check cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclEndCCOut		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.18
Number of sent oam segment continuity check cells
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamVclOamCellsDropped		1.3.6.1.4.1.13191.10.3.2.2.1.3.1.19
Number of received oam cells that are ignored and dropped
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

oacAtmOamStatGroups		1.3.6.1.4.1.13191.10.3.2.2.3.1
OBJECT IDENTIFIER

oacAtmOamStatCompliances		1.3.6.1.4.1.13191.10.3.2.2.3.2
OBJECT IDENTIFIER

oacAtmOamStatCompliance		1.3.6.1.4.1.13191.10.3.2.2.3.2.1
The compliance statement for agents that support the ONEACCESS-OAM-MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

oacAtmOamStatGeneralGroup		1.3.6.1.4.1.13191.10.3.2.2.3.1.1
This group is mandatory for all OAM entities.
Status: current	Access: read-only
OBJECT-GROUP