OMNITRON-MIB

File: OMNITRON-MIB.mib (127942 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
OMNITRON-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 Unsigned32 Counter32
Counter64 DisplayString TruthValue
TimeInterval MODULE-COMPLIANCE OBJECT-GROUP
omnitron OstVlanId OstModeType
icAgent OstPortNumber OstPortList

Defined Types

ChassisEntry  
SEQUENCE    
  chassisnum Integer32
  slotnum Integer32
  chassistype Integer32
  prodtype Integer32
  chassisname DisplayString
  partnum DisplayString
  serialnum DisplayString
  manufdate DisplayString
  softrev Integer32
  prodrev Integer32
  ledstat Integer32
  switchstat Integer32
  extended1 Integer32
  extended2 Integer32
  extended3 Integer32
  extended4 Integer32
  extended5 Integer32
  extended6 Integer32
  resetmod Integer32
  wrswitch Integer32
  modulename DisplayString

ModuleEntry  
SEQUENCE    
  modchassnum Integer32
  modslotnum Integer32
  modchasstype Integer32
  modprodtype Integer32
  modsoftrev Integer32
  modprodrev Integer32
  modreset Integer32
  modnumports Integer32
  modchassname DisplayString
  modpartnum DisplayString
  modserialnum DisplayString
  modmanufdate DisplayString
  modname DisplayString
  modportvlan Integer32
  modextfeaturebits Integer32
  modswbuildnum Integer32
  modenable802dot1qProcessing Integer32
  modtagsubstitution Integer32
  modcommitVLANchanges Integer32
  modvlanTableClear Integer32
  modcommitNMMCfgChanges Integer32
  modLM80volts Integer32
  modLM80currents Integer32
  modLM80misc Integer32
  modRestoreFactoryDefaults Integer32
  coreStatusOnly Integer32
  ingressPolicingType Integer32
  vlanservicetag Integer32
  defaultForwardingMap Integer32
  modFpgaRev DisplayString
  modExpPartNumber DisplayString
  modExpSoftwareRev DisplayString
  modExpLedStatus OCTET STRING
  modHwRev DisplayString
  modPcbRev DisplayString

ModuleMgtCfgEntry  
SEQUENCE    
  sysAdminStatus Integer32
  sysDateTime DisplayString
  macAddr DisplayString
  ipAddr IpAddress
  subnetmask IpAddress
  gateway IpAddress
  readCommunity DisplayString
  writeCommunity DisplayString
  mychassnum Integer32
  mmname DisplayString
  traphost1 IpAddress
  traphost2 IpAddress
  traphost3 IpAddress
  traphost4 IpAddress
  traphost5 IpAddress
  traphost6 IpAddress
  traphost7 IpAddress
  traphost8 IpAddress
  sysloc DisplayString
  syscon DisplayString
  serialpass DisplayString
  telnetpass DisplayString
  ftppasswrd DisplayString
  keepAliveInterval Integer32
  vlanIdOst OstVlanId
  nmmCfgSerialBaudrate Integer32
  enabledFunctions Integer32
  enableSNMPFunction Integer32
  nmmCfgState Integer32
  nmmSecureMode Integer32
  nmmSecureConnState Integer32
  nmmIpProtocolState Integer32
  nmmIpDisabled Integer32
  vlanPri Integer32
  enableSNMPWrites Integer32
  cpuVoltageIn Integer32
  cpuVoltageOut Integer32
  cpuTemperature Integer32
  nmmSecureSlaveSlot Integer32
  dhcpIpAddr IpAddress
  dhcpSubnetmask IpAddress
  dhcpGateway IpAddress
  nmmOAMmgmtMode Integer32
  customertag Integer32
  servicetag Integer32
  cnodeControl Integer32
  cnodeCIR Integer32
  enableSNMPv3Function Integer32
  slaveWrite Integer32
  snmpTrapType Integer32
  capsMask Unsigned32
  slaveTraps Integer32
  slaveTrapsForward Integer32
  ipAddr2 IpAddress
  subnetmask2 IpAddress
  gateway2 IpAddress
  ipaddrEVCassociation DisplayString
  ipaddr2EVCassociation DisplayString
  bootpEnable TruthValue
  tftpEnable TruthValue
  tftpServerIpAddress IpAddress
  dhcptftpServerIpAddress IpAddress
  tftpFileName DisplayString
  modeType OstModeType
  dhcpPortNumber Integer32
  dhcpTagVid OstVlanId
  trapSrcIpSelect Unsigned32
  muxGroupDefaults TruthValue
  portFwdCpu INTEGER
  portFwdCpuList OstPortList

ModulePortsEntry  
SEQUENCE    
  portnum OstPortNumber
  portState INTEGER
  portEgressRate Integer32
  portpriority Integer32
  portcanonicalformatIndicator Integer32
  portvlanidentifier Integer32
  portmlistcriteria Integer32
  portingresssecurity Integer32
  portegresspolicy Integer32
  portIngressRate Integer32
  portSpeed Integer32
  portUnidirectionalAhOamEnable Integer32
  portIngressRateDropOrPause Integer32
  portIngressRateCBS Integer32
  portL2CPmgntProcessing Integer32
  portEgressQosPolicy Integer32
  portAccessType Integer32
  portStatsClear Integer32
  portLinkState Integer32
  portDuplex INTEGER
  portMacAddress DisplayString

PortStatsEntry  
SEQUENCE    
  txOctets Counter32
  txDropPkts Counter32
  txBroadcastPkts Counter32
  txMulticastPkts Counter32
  txUnicastPkts Counter32
  txGoodPkts Counter32
  txErrorPkts Counter32
  txPausePkts Counter32
  txCollisions Counter32
  txSingleCollision Counter32
  txMultipleCollision Counter32
  txDeferedTransmit Counter32
  txLateCollision Counter32
  txExcessiveCollision Counter32
  txDroppedEvents Counter32
  rxOctets Counter32
  rxDropPkts Counter32
  rxBroadcastPkts Counter32
  rxMulticastPkts Counter32
  rxUnicastPkts Counter32
  rxGoodPkts Counter32
  rxTotalPkts Counter32
  rxErrorPkts Counter32
  rxPausePkts Counter32
  rxUndersizePkts Counter32
  rxOversizePkts Counter32
  rxFragments Counter32
  rxJabbers Counter32
  rxAlignmentErrors Counter32
  rxFCSErrors Counter32
  rxSymbolErrors Counter32
  rxCRCAlignErrors Counter32
  rxPackets64 Counter32
  rxPackets65to127 Counter32
  rxPackets128to255 Counter32
  rxPackets256to511 Counter32
  rxPackets512to1023 Counter32
  rxPackets1024to1518 Counter32
  txOctets64 Counter64
  rxOctets64 Counter64

ModuleVLANEntry  
SEQUENCE    
  index Integer32
  validityflag Integer32
  vlanidentifier Integer32
  port1Membership Integer32
  port2Membership Integer32
  port3Membership Integer32
  port4Membership Integer32
  port5Membership Integer32
  port6Membership Integer32

PortAHEntry  
SEQUENCE    
  ahEnabled Integer32
  ahLpbkMode Integer32
  ahLocalMode Integer32
  ahRemoteMode Integer32
  ahLocalMuxState Integer32
  ahRemoteMuxState Integer32
  ahLocalParserState Integer32
  ahRemoteParserState Integer32
  ahLocalSupportVar Integer32
  ahLocalLinkFlags Integer32
  ahLocalLpbkTimeout Integer32
  ahRemoteSupportVar Integer32
  ahRemoteLinkFlags Integer32
  ahRemoteLpbkTimeout Integer32
  ahLocalOUI OCTET STRING
  ahRemoteOUI OCTET STRING
  ahErroredSymbolPeriodWindow Unsigned32
  ahErroredSymbolPeriodThreshold Unsigned32
  ahErroredFrameWindow Unsigned32
  ahErroredFrameThreshold Unsigned32
  ahErroredFramePeriodWindow Unsigned32
  ahErroredFramePeriodThreshold Unsigned32
  ahErroredFrameSecondsWindow Unsigned32
  ahErroredFrameSecondsThreshold Unsigned32
  ahRemoteLinkPort Integer32
  ahSymbolErrorRunningTotal Unsigned32
  ahSymbolErrorEventTotal Unsigned32
  ahFrameErrorRunningTotal Unsigned32
  ahFrameErrorEventTotal Unsigned32
  ahFramePeriodRunningTotal Unsigned32
  ahFramePeriodEventTotal Unsigned32
  ahFrameSecondsSummaryRunningTotal Unsigned32
  ahFrameSecondsSummaryEventTotal Unsigned32
  ahClearStatistics TruthValue
  ahTransmissionRate Unsigned32
  ahCriticalEventMode Unsigned32
  ahCriticalEventTrapList OCTET STRING

PortSFPEntry  
SEQUENCE    
  portSFPstatus Integer32
  portSFPpageA0 OCTET STRING
  portSFPpageA2 OCTET STRING
  portSfpBitRate OCTET STRING
  portSfpVendorName OCTET STRING
  portSfpVendorPartNumber OCTET STRING
  portSfpVendorSerialNumber OCTET STRING
  portSfpDateCode OCTET STRING
  portSfpTemperature OCTET STRING
  portSfpVcc OCTET STRING
  portSfpBiasCurrent OCTET STRING
  portSfpTxPower OCTET STRING
  portSfpRxPower OCTET STRING

UserEntry  
SEQUENCE    
  userIndex Integer32
  snmpv3UserName DisplayString
  snmpv3SecurityLevel Integer32
  snmpv3AuthPassword OCTET STRING
  snmpv3PrivPassword OCTET STRING
  snmpv3UserType Integer32

OstProtocolStatusEntry  
SEQUENCE    
  ostProtocolStatusIndex Unsigned32
  ostProtocolStatusType INTEGER
  ostProtocolStatusState INTEGER
  ostProtocoManagementPort INTEGER
  ostProtocolStatusIpAddress IpAddress
  ostProtocolStatusSessionOpenLockTime TimeInterval

OstEnvironmentalStatusEntry  
SEQUENCE    
  ostEnvironmentalPs1Status INTEGER
  ostEnvironmentalPs1VoltageIn Integer32
  ostEnvironmentalPs1VoltageOut Unsigned32
  ostEnvironmentalPs1CurrentOut Unsigned32
  ostEnvironmentalPs2Status INTEGER
  ostEnvironmentalPs2VoltageIn Integer32
  ostEnvironmentalPs2VoltageOut Unsigned32
  ostEnvironmentalPs2CurrentOut Unsigned32
  ostEnvironmentalTemperature Integer32
  ostEnvironmentalFan1Status INTEGER
  ostEnvironmentalFan1Speed Unsigned32
  ostEnvironmentalFan2Status INTEGER
  ostEnvironmentalFan2Speed Unsigned32
  ostEnvironmentalFan3Status INTEGER
  ostEnvironmentalFan3Speed Unsigned32

Defined Values

omnitronMIB 1.3.6.1.4.1.7342.3
Omnitron MIB for use with v5.2 iConverter Management Modules and NetOutlook Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved
MODULE-IDENTITY    

prodAgent 1.3.6.1.4.1.7342.2
OBJECT IDENTIFIER    

omnitronConformance 1.3.6.1.4.1.7342.4
OBJECT IDENTIFIER    

omnitronProducts 1.3.6.1.4.1.7342.5
OBJECT IDENTIFIER    

managementModule 1.3.6.1.4.1.7342.5.1
OBJECT IDENTIFIER    

chassis 1.3.6.1.4.1.7342.1.6
Holds the chassis number of the selected IP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..19  

selfSlot 1.3.6.1.4.1.7342.1.8
Holds the slot number of the selected IP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..22  

chassisTable 1.3.6.1.4.1.7342.1.1
This a table of chassis and their modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChassisEntry

chassisEntry 1.3.6.1.4.1.7342.1.1.1
Chassis modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  ChassisEntry  

chassisnum 1.3.6.1.4.1.7342.1.1.1.1
The chassis where the module resides. Ranges in value from 1 - 19.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..19  

slotnum 1.3.6.1.4.1.7342.1.1.1.2
The slot number of the module. For the 19 slot chassis it ranges in value from 1-22. For the 2 slot chassis it ranges in value from 1-2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..22  

chassistype 1.3.6.1.4.1.7342.1.1.1.3
Type of chassis: 1 = 19 module chassis 2 = 2 module chassis 3 = 5 module chassis 4 = 1 module chassis 5 = stand alone chassis 6 = 1-module redundant power chassis
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

prodtype 1.3.6.1.4.1.7342.1.1.1.4
The product type of the module: 61 = iConverter NMM 64 = iConverter Power Supply (19 Module) 65 = iConverter 10FL/T Ethernet 66 = iConverter 100 Fx/Tx Ethernet 67 = iConverter Fiber/Fiber 68 = iConverter 10/100 Ethernet 70 = iConverter 2FXM slave 72 = iConverter GX/X 74 = iConverter Tx/2Tx Ethernet 75 = iConverter Gx Gigabit Ethernet 76 = iConverter Tx/2Fx Ethernet 77 = iConverter T1/E1 79 = iConverter 4Tx Ethernet 80 = iConverter 10/100M 81 = iConverter GX/T Ethernet 82 = iConverter Power Supply (5 Module) 83 = iConverter GX/F Ethernet 84 = iConverter 2FX Ethernet 85 = iConverter 10T/2 Ethernet 86 = iConverter 10/100VT Ethernet 87 = iConverter 4Tx VT 88 = iConverter RS 422/485 89 = iConverter T3/E3 90 = iConverter 10/100M slave 92 = iConverter RS 232 93 = iConverter GX/TM 94 = iConverter GX/TM slave 95 = iConverter 2GXM 96 = iConverter 2FXM 97 = iConverter GM3 2xSFP 98 = iConverter 2GXM slave 99 = iConverter GM3 2xUTP 100= iConverter 10/100M2 101= iConverter 2FXM2 102= iConverter GM3 SFP/2xUTP 103= iConverter 1-Module Redundant Powered Chassis 104= iConverter Gx AN 105= iConverter GX/TM2 106= iConverter 2GX/TM2 107= iConverter 4xT1/E1 Mux 108= iConverter GM3 2xSFP/UTP 109= iConverter GM3 3xSFP 110= iConverter X.21 112= iConverter GM3 3xUTP 113= iConverter GM3 FF/UTP or SFP/UTP 114= iConverter CWDM 115= iConverter XG 117= iConverter TM3 119= iConverter 4GT 120= iConverter GM4 2xSFP/TP 136= iConverter XGT+ 137= iConverter GM4 5-Port 142= iConverter GX/T2 143= iConverter GM4-HPoE or GM4-PoE+ 253= iConverter GM3 2XSFP 254= iConverter GM3 1xSFP/2xUTP 255= iConverter Unknown
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

chassisname 1.3.6.1.4.1.7342.1.1.1.5
The name of the chassis. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port, or via its own IP address for Telnet, SSH, or SNMP. For the GM3, GM4, XM5 when the object is indirectly accessed via the backplane, through IP-less, or through 802.3ah peer-to-peer the value is truncated to 32 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

partnum 1.3.6.1.4.1.7342.1.1.1.6
The part number of the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

serialnum 1.3.6.1.4.1.7342.1.1.1.7
The serial number of the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

manufdate 1.3.6.1.4.1.7342.1.1.1.8
The date the module was manufactured in form YYYYMMDD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

softrev 1.3.6.1.4.1.7342.1.1.1.9
The software revision of the module software.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

prodrev 1.3.6.1.4.1.7342.1.1.1.10
The product revision of the module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

ledstat 1.3.6.1.4.1.7342.1.1.1.11
The status of any first 32 LEDs on the module, excluding the power LED. If an LED is missing its number is skipped. For an eight LED position device the following is the decoding: ledstat.7 is the top LED position ledstat.6 is the second LED position ledstat.5 is the third LED position ledstat.4 is the fourth LED position ledstat.3 is the fifth LED position ledstat.2 is the sixth LED position ledstat.1 is the seventh LED position ledstat.0 is the eighth and bottom LED position For devices that have 32 or less LEDs this object contains all the LEDs. For those devices that have more than 32 LEDs, LEDs 33 and above are only covered by the modExpLedStatus object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchstat 1.3.6.1.4.1.7342.1.1.1.12
The status of any DIP switches on the module. DIP switch 1 is switchstat.0, DIP switch 2 is switchstat.1, DIP switch 3 is switchstat.2, etc. DIP switch bank 1 is switches 0-7 DIP switch bank 2 is switches 8-15 Front panel switches start at switchstat.7 for the top switch, switchstat.6 for the next switch, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

extended1 1.3.6.1.4.1.7342.1.1.1.13
General extended status for the module. Normally this is the actual setting of the DIP switch selection.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

extended2 1.3.6.1.4.1.7342.1.1.1.14
General extended status for the module
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

extended3 1.3.6.1.4.1.7342.1.1.1.15
General extended status for the module
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

extended4 1.3.6.1.4.1.7342.1.1.1.16
General extended status for the module
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

extended5 1.3.6.1.4.1.7342.1.1.1.17
General extended status for the module
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

extended6 1.3.6.1.4.1.7342.1.1.1.18
General extended status for the module
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

resetmod 1.3.6.1.4.1.7342.1.1.1.19
Writing to this variable resets the module. This variable is a write only. Writing a zero (0) will reboot to the current working application image Writing a one (1) will reboot to the backup application image if available
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wrswitch 1.3.6.1.4.1.7342.1.1.1.20
Writing to this variable updates the module switch settings. See switchstat above for the explanation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modulename 1.3.6.1.4.1.7342.1.1.1.21
The name of the module
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

enhancedchassisTable 1.3.6.1.4.1.7342.2.1
OBJECT IDENTIFIER    

moduleCount 1.3.6.1.4.1.7342.2.1.1
The number of modules in the chassis table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..22  

moduleTable 1.3.6.1.4.1.7342.2.1.2
This a table of modules in the enhances chassis table. It contains as many entries as specified by moduleCount
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModuleEntry

moduleEntry 1.3.6.1.4.1.7342.2.1.2.1
Chassis modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  ModuleEntry  

modchassnum 1.3.6.1.4.1.7342.2.1.2.1.1
The chassis where the module resides.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..19  

modslotnum 1.3.6.1.4.1.7342.2.1.2.1.2
The slot number within a chassis.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..22  

modchasstype 1.3.6.1.4.1.7342.2.1.2.1.3
The type of chassis in which the module resides.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

modprodtype 1.3.6.1.4.1.7342.2.1.2.1.4
The chassis where the module resides.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

modsoftrev 1.3.6.1.4.1.7342.2.1.2.1.5
The modules software revision.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modprodrev 1.3.6.1.4.1.7342.2.1.2.1.6
The modules product revision.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modreset 1.3.6.1.4.1.7342.2.1.2.1.7
Writing to this variable resets the module. This variable is a write only. Writing a zero (0) will reboot to the current working application image Writing a one (1) will reboot to the backup application image if available
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modnumports 1.3.6.1.4.1.7342.2.1.2.1.8
The number of ports in this module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modchassname 1.3.6.1.4.1.7342.2.1.2.1.9
The name of the chassis in which the individual module resides in. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port, or via its own IP address for Telnet, SSH, or SNMP. For the GM3, GM4, XM5 when the object is indirectly accessed via the backplane, through IP-less, or through 802.3ah peer-to-peer the value is truncated to 32 bytes.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

modpartnum 1.3.6.1.4.1.7342.2.1.2.1.10
The model of the individual module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

modserialnum 1.3.6.1.4.1.7342.2.1.2.1.11
The serial number of the individual module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

modmanufdate 1.3.6.1.4.1.7342.2.1.2.1.12
The manufacturing date of the individual module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

modname 1.3.6.1.4.1.7342.2.1.2.1.13
The name of the individual module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

modportvlan 1.3.6.1.4.1.7342.2.1.2.1.14
The portvlan map of an individual module. The low order bits encode the possible values. The following are the connection paths that exists between the ports on the module: Used on types 69, 72, 81, 83, 84, 86 bit0 - Port 1 to Port 2 bit1 - Port 1 to Backplane Port A bit2 - Port 1 to Backplane Port B bit3 - Port 2 to Backplane Port A bit4 - Port 2 to Backplane Port B bit5 - Backplane Port A to Backplane Port B Used on types 70, 80, 90, 93, 94, 95, 96, 98, 100, 101, 105, 106 bit0 - Port 1 to Port 2 bit1 - Port 1 to Backplane Port A bit2 - Port 1 to Backplane Port B bit3 - Port 2 to Backplane Port A bit4 - Port 2 to Backplane Port B bit5 - Backplane Port A to Backplane Port B bit6 - Port 1 to Mgt bit7 - Port 2 to Mgt bit8 - Backplane A to Mgt bit9 - Backplane B to Mgt Used on types 102, 108, 109, 112 bit0 - Port 1-2-3 interconnect bit1 - Port 1-2-3 to Backplane Port A bit2 - Port 1-2-3 to Backplane Port B bit3 - Backplane Port A to Backplane Port B bit4 - Port 1 to Mgt bit5 - Port 2 to Mgt bit6 - Port 3 to Mgt bit7 - Backplane A to Mgt bit8 - Backplane B to Mgt Used on types 97, 99, 113 bit0 - Port 1 to Port 2 bit1 - Port 1 to Backplane Port A bit2 - Port 1 to Backplane Port B bit3 - Port 2 to Backplane Port A bit4 - Port 2 to Backplane Port B bit5 - Backplane Port A to Backplane Port B bit6 - Port 1 to Mgt bit7 - Port 2 to Mgt bit8 - Backplane A to Mgt bit9 - Backplane B to Mgt Used on types 79, 87 bit0 - Port 1-2-3-4 interconnect bit1 - Port 1-2-3-4 to backplane A bit2 - Port 1-2-3-4 to backplane B bite 3 Backplane A to Backplane B Used on type 103 bit0 - Port A to Backplane A bit1 - Port A to Backplane B bit2 - Port B to Backplane A bit3 - Port B to Backplane B bit4 - Port A to Port B
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modextfeaturebits 1.3.6.1.4.1.7342.2.1.2.1.15
The module's extended features bits. The bit definitions are: bit0 - module is capable of being field upgradeable bit1 - module supports MIB Statistics bit2 - module supports Memory I/O extended registers bit3 - module supports Tag Vlan feature bit4 - module configured as Secure Slave bit5 - module configured as Secure Proxy bit6 - module configured as Secure Master bit7 - module supports 802.3ah OAM Client bit8 - module supports SFP parameters for port1 bit9 - module supports SFP parameters for port2 bit10 - module supports SFP parameters for port3 bit11 - module supports SFP parameters for port4 bit12 - module supports AH event notification bit13 - 1-module redundant power chassis supports contact closure status bit14 - 1-module redundant power chassis supports power over ethernet bit15 - 1-module redundant power chassis RJ45 connector is installed bit16 - 1-module redundant power chassis fan is installed bit17 - when this bit is on the module is a remote slave bit18 - module supports unidirectional on port1 bit19 - module supports unidirectional on port2 bit20 - module supports unidirectional on port3 bit21 - extended power supply bit22 - module supports SNMPv3 bit23 - module is NMM2 capable bit24 - fan is installed bit25 - generic module class supports 802.1ag/Y.1731 bit26 - module GM3 class supports 802.1ag/Y.1731 bit27 - module GM4 class bit28 - port 1 is an XFP port bit29 - port 2 is an XFP port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modswbuildnum 1.3.6.1.4.1.7342.2.1.2.1.16
The module's software build number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modenable802dot1qProcessing 1.3.6.1.4.1.7342.2.1.2.1.17
Enables or disables 802_1q processing. 0 = disable 1 = enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

modtagsubstitution 1.3.6.1.4.1.7342.2.1.2.1.18
Enables or disables substitution of 802_1q tags. Currently not implemented by any supported module
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

modcommitVLANchanges 1.3.6.1.4.1.7342.2.1.2.1.19
VLAN information is applied to the module and data saved to persistent storage. This variable is a write only.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

modvlanTableClear 1.3.6.1.4.1.7342.2.1.2.1.20
VLAN table for the module Vlan table to be cleared. This variable is a write only.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

modcommitNMMCfgChanges 1.3.6.1.4.1.7342.2.1.2.1.21
Management module configuration information is applied to the module and data saved to persistent storage. This variable is a write only.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

modLM80volts 1.3.6.1.4.1.7342.2.1.2.1.22
8 bits each of PS1 Voltage(msB), PS2 Voltage, Total Voltage and an unused byte(lsB). 1-module redundant power chassis.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modLM80currents 1.3.6.1.4.1.7342.2.1.2.1.23
8 bits each of PS1 Current(msB) (mA/10), PS2 Current, Total Current and an unused byte(lsB). 1-module redundant power chassis.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modLM80misc 1.3.6.1.4.1.7342.2.1.2.1.24
8 bits each of Temperature(msB) .5C/bit and 2 unused byte(lsB). 1-module redundant power chassis.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modRestoreFactoryDefaults 1.3.6.1.4.1.7342.2.1.2.1.25
Management module configuration information is restored to factory defaults. This variable is a write only. Different types of restore defaults are supported: restoreFactoryDefaults(0,1) Restores factory defaults restoreLocalDefaults(2) Restores defaults from local file restorePreviousConfig(3) Restores the previously saved configuration. This is useful to regress to a known working setup. restoreFactoryDefaultsKeepIp(4) Restores factory defaults but keeps IP based settings restoreLocalDefaultsKeepIp(5) Restores defaults from local file but keeps IP based settings. restorePreviousConfigKeepIp(6) Restores the previously saved configuration but keeps IP based settings.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..6  

coreStatusOnly 1.3.6.1.4.1.7342.2.1.2.1.26
Enable(1) or disable(0) Core Status Only.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

ingressPolicingType 1.3.6.1.4.1.7342.2.1.2.1.27
Sets the module global policy used to count bytes for bandwidth calculation purposes. This is available on the GM3 & GM4. This is not available on the XM5. 1 = L1 includes all bytes in frame, interframe gap and preamble 2 = L2 includes all bytes in frame, including Layer 2 header and CRC 3 = L3 includes Layer 3 information only, excludes Layer 2 header and CRC
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3  

vlanservicetag 1.3.6.1.4.1.7342.2.1.2.1.28
Value for service tag.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

defaultForwardingMap 1.3.6.1.4.1.7342.2.1.2.1.29
Bit vector for default forwarding map where: bit0 - Port 1 bit1 - Port 2 bit2 - Port 3 bit3 - Port 4 bit4 - Port BPA bit5 - Port BPB
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modFpgaRev 1.3.6.1.4.1.7342.2.1.2.1.30
The current revision of the FPGA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

modExpPartNumber 1.3.6.1.4.1.7342.2.1.2.1.31
The expanded part number of the individual module. The modpartnum object indicates the compressed version of the part number name. If this field is not supported in a module it is left as a null length string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

modExpSoftwareRev 1.3.6.1.4.1.7342.2.1.2.1.32
The expanded software revision of the individual module. This object allows for an enhanced version of the software revision that include a major and minor component. Major and Minor are always numeric values while the rev value can be a number or an alpha. For instance: 1.0, 1.1, 3.2A, 1.1.2. The two digit modsoftrev object includes the major and minor revision. A modsoftrev of '32' would be shown in this object as '3.2'. This object allows the minor number to be expanded beyond a single digit as shown above by '3.2A' above, even though modsoftrev would be '32'. The modswbuildnum is independent of this scheme, but the complete revision is sometimes referred together as a concatenated value. For instance is '3.2A' is the sofware rev and '1234' is the build number, the concatenated value is '3.2A.1234'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

modExpLedStatus 1.3.6.1.4.1.7342.2.1.2.1.33
This object is the expanded LED status of the individual module. This object reflects the state, color, and blinking rate of each individual LED. Each LED is represented by a single octet. The first octet in the string is the first LED, the second octet in the string is the second LED, until the last LED. The length of the object indicates the number of LEDs of the modules. Non-installed (missing) LEDs return a value of all zeros. Each octet is encoded in the following way: Bits 0:1 indicate the LED color and state 0x0 = LED is off 0x1 = LED is amber 0x2 = LED is green 0x3 = LED is both amber and green (red) Bits 2:4 indicate the LED blinking frequency 0x0 = LED is solid 0x1 = LED is blinking at 10 Hz 0x2 = LED is blinking at 5 Hz 0x3 = LED is blinking at 2 Hz 0x4 = LED is blinking at 1 Hz 0x5 = LED is blinking at 1/2 Hz Bits 5:7 are currently undefined and return 0x0 for this product revision.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

modHwRev 1.3.6.1.4.1.7342.2.1.2.1.34
The current hardware revision of the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

modPcbRev 1.3.6.1.4.1.7342.2.1.2.1.35
The current PCB revision of the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

moduleMgtCfgTable 1.3.6.1.4.1.7342.2.1.3
This is a table of the management module configuration variables.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModuleMgtCfgEntry

moduleMgtCfgEntry 1.3.6.1.4.1.7342.2.1.3.1
Chassis modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  ModuleMgtCfgEntry  

sysAdminStatus 1.3.6.1.4.1.7342.2.1.3.1.1
This variable provides the status for a management module's ability to make changes to the system. In backplane slave, a management module cannot make system modification. Modifications must be performed from a management module acting as a backplane master. 0 = read only (can only view configuration settings) 1 = read-write (can view and modify configuration settings).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

sysDateTime 1.3.6.1.4.1.7342.2.1.3.1.2
This variable provides the date and time in display format: nn/dd/yyyy hh:mm:ss where nn = 2 digit month, dd = 2 digit day, yyyy = 4 digit year hh - 2 digit hour 0-23, mm = 2 digit minutes 0-59, ss = 2 digit secs 0-59
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(19)  

macAddr 1.3.6.1.4.1.7342.2.1.3.1.3
MAC address of the management module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(17)  

ipAddr 1.3.6.1.4.1.7342.2.1.3.1.4
IP of the management module
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

subnetmask 1.3.6.1.4.1.7342.2.1.3.1.5
subnetmask for the management module
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gateway 1.3.6.1.4.1.7342.2.1.3.1.6
IP address for the gateway the management module will use.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

readCommunity 1.3.6.1.4.1.7342.2.1.3.1.7
SNMP read community name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

writeCommunity 1.3.6.1.4.1.7342.2.1.3.1.8
SNMP set community name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

mychassnum 1.3.6.1.4.1.7342.2.1.3.1.9
NMMs chassis number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..19  

mmname 1.3.6.1.4.1.7342.2.1.3.1.10
Management Modules chassis name. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port, or via its own IP address for Telnet, SSH, or SNMP. For the GM3, GM4, XM5 when the object is indirectly accessed via the backplane, through IP-less, or through 802.3ah peer-to-peer the value is truncated to 32 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

traphost1 1.3.6.1.4.1.7342.2.1.3.1.11
NMMs traphost1 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost2 1.3.6.1.4.1.7342.2.1.3.1.12
NMMs traphost2 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost3 1.3.6.1.4.1.7342.2.1.3.1.13
NMMs traphost3 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost4 1.3.6.1.4.1.7342.2.1.3.1.14
NMMs traphost4 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost5 1.3.6.1.4.1.7342.2.1.3.1.15
NMMs traphost5 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost6 1.3.6.1.4.1.7342.2.1.3.1.16
NMMs traphost6 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost7 1.3.6.1.4.1.7342.2.1.3.1.17
NMMs traphost7 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

traphost8 1.3.6.1.4.1.7342.2.1.3.1.18
NMMs traphost8 IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sysloc 1.3.6.1.4.1.7342.2.1.3.1.19
Management Modules system location. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port, or via its own IP address for Telnet, SSH, or SNMP. For the GM3, GM4, XM5 when the object is indirectly accessed via the backplane, through IP-less, or through 802.3ah peer-to-peer the value is truncated to 32 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

syscon 1.3.6.1.4.1.7342.2.1.3.1.20
Management Modules system Contact information. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port, or via its own IP address for Telnet, SSH, or SNMP. For the GM3, GM4, XM5 when the object is indirectly accessed via the backplane, through IP-less, or through 802.3ah peer-to-peer the value is truncated to 32 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

serialpass 1.3.6.1.4.1.7342.2.1.3.1.21
NMMs serial interface password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

telnetpass 1.3.6.1.4.1.7342.2.1.3.1.22
NMMs telnet interface password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

ftppasswrd 1.3.6.1.4.1.7342.2.1.3.1.23
NMMs ftp password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

keepAliveInterval 1.3.6.1.4.1.7342.2.1.3.1.24
This the interval used by the NMM to send out keep alive traps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..600  

vlanIdOst 1.3.6.1.4.1.7342.2.1.3.1.25
Management module VLAN tagged packet ID.
Status: current Access: read-write
OBJECT-TYPE    
  OstVlanId  

nmmCfgSerialBaudrate 1.3.6.1.4.1.7342.2.1.3.1.26
This variable defines the baud rate for the serial interface to the NMM. Where: 1 = 300 bps 2 = 1200 bps 3 = 2400 bps 4 = 4800 bps 5 = 9600 bps 6 = 19200 bps 7 = 38400 bps 8 = 57600 bps 9 = 115200 bps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..9  

enabledFunctions 1.3.6.1.4.1.7342.2.1.3.1.27
This variable defines which special functions are enabled at the NMM. Where: 0x01 = Keep Alive trap enabled 0x02 = Telnet enabled 0x04 = FTP enabled 0x08 = switch reload enabled 0x10 = VLAN enabled 0x20 = sw1 block enabled 0x40 = DHCP client enabled 0x80 = Trap 99 processing enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

enableSNMPFunction 1.3.6.1.4.1.7342.2.1.3.1.28
This variable defines whether the SNMP Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

nmmCfgState 1.3.6.1.4.1.7342.2.1.3.1.29
This variable defines the state of the configuration changes made to the NMM. Where: 0x00 = No changes 0x02 = Changes Pending (not saved in Flash) 0x04 = Saved in Flash, Pending NMM reboot
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nmmSecureMode 1.3.6.1.4.1.7342.2.1.3.1.30
This variable defines the mode the Management module will operate in when configured for SECURE COMMUNICATIONS. Where: 0x00 = No Secure Communications 0x01 = Secure Proxy 0x02 = Secure Slave 0x03 = Secure Master
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

nmmSecureConnState 1.3.6.1.4.1.7342.2.1.3.1.31
This variable returns the secure connection state between the proxy and secure slave. Where: 0x00 = Not connected 0x01 = Connection Pending 0x02 = Connection established 0x03 = Connection terminating
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3  

nmmIpProtocolState 1.3.6.1.4.1.7342.2.1.3.1.32
This variable defines whether the IP protocol is active or disabled. 0 = Active 1 = Disabled
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

nmmIpDisabled 1.3.6.1.4.1.7342.2.1.3.1.33
This variable defines the configuration value for IP protocol's desired state. 0 = ipActive 1 = ipDisabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

vlanPri 1.3.6.1.4.1.7342.2.1.3.1.34
Management module VLAN tagged packet priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

enableSNMPWrites 1.3.6.1.4.1.7342.2.1.3.1.35
Permit SNMP SET operations.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

cpuVoltageIn 1.3.6.1.4.1.7342.2.1.3.1.36
voltage input to cpu.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuVoltageOut 1.3.6.1.4.1.7342.2.1.3.1.37
Voltage out from the cpu.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTemperature 1.3.6.1.4.1.7342.2.1.3.1.38
The ambient temperature of the CPU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nmmSecureSlaveSlot 1.3.6.1.4.1.7342.2.1.3.1.39
The slot number of the secure slave in the remote chassis when configured for SECURE COMMUNICATIONS.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..19  

dhcpIpAddr 1.3.6.1.4.1.7342.2.1.3.1.40
IP of the management module as assigned by a DHCP server
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpSubnetmask 1.3.6.1.4.1.7342.2.1.3.1.41
subnetmask of the management module as assigned by a DHCP server
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpGateway 1.3.6.1.4.1.7342.2.1.3.1.42
Gateway IP address of the management module as assigned by a DHCP Server
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

nmmOAMmgmtMode 1.3.6.1.4.1.7342.2.1.3.1.43
This variable configures the protocol the Management module will use to communicate with remote chassis when operating in secure mode. Where: 0x01 = (OAM_OFF) No Secure Communications protocol 0x02 = (Auto SECURE_OAM) Use OST proprietary protocol, force remote to switch if not in the OAM_OFF mode 0x03 = (Auto AH_OAM) Use AH protocol, force remote to switch if not in the OAM_OFF mode 0x04 = (SECURE_OAM) Use OST proprietary protocol, remote is not forced to switch and must match modes to connect 0x05 = (AH_OAM) Use AH protocol, remote is not forced to switch and must match modes to connect
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..5  

customertag 1.3.6.1.4.1.7342.2.1.3.1.44
Value for customer tag.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

servicetag 1.3.6.1.4.1.7342.2.1.3.1.45
Value for service tag.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

cnodeControl 1.3.6.1.4.1.7342.2.1.3.1.46
Controls whether the module is operating as a Cnode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

cnodeCIR 1.3.6.1.4.1.7342.2.1.3.1.47
Cnode CIR Where: 1 = 64 Kbps 2 = 128 Kbps 3 = 192 Kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3  

enableSNMPv3Function 1.3.6.1.4.1.7342.2.1.3.1.48
This variable defines whether the SNMPv3 Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

slaveWrite 1.3.6.1.4.1.7342.2.1.3.1.49
This variable defines whether the module should be allowed to make configurations to itself when in the chassis slave mode. Where: 00 = slaveWrite disabled 01 = slaveWrite enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

snmpTrapType 1.3.6.1.4.1.7342.2.1.3.1.50
This variable defines which version of SNMP traps are supported, where: 1 = SNMPv1 traps 2 = SNMPv2c traps 3 = SNMPv3 traps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3  

capsMask 1.3.6.1.4.1.7342.2.1.3.1.51
Capablility bits for this management module.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

slaveTraps 1.3.6.1.4.1.7342.2.1.3.1.52
This variable defines whether the module should be allowed to transmit traps out ethernet ports eventhough it is not a chassis master. Where: 00 = slaveTraps disabled 01 = slaveTraps enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

slaveTrapsForward 1.3.6.1.4.1.7342.2.1.3.1.53
This variable defines whether the module should be allowed to forward traps to the chassis master when module is a chassis slave. Default is forward. Where: 00 = slaveTrapsForward disabled 01 = slaveTrapsForward enabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

ipAddr2 1.3.6.1.4.1.7342.2.1.3.1.54
IP 2 of the management module
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

subnetmask2 1.3.6.1.4.1.7342.2.1.3.1.55
subnetmask 2 for the management module
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gateway2 1.3.6.1.4.1.7342.2.1.3.1.56
IP address for the gateway 2 the management module will use.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipaddrEVCassociation 1.3.6.1.4.1.7342.2.1.3.1.57
*** This object is deprecated *** EVC associated with ipaddr 1.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..45)  

ipaddr2EVCassociation 1.3.6.1.4.1.7342.2.1.3.1.58
*** This object is deprecated *** EVC associated with ipaddr 2.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..45)  

bootpEnable 1.3.6.1.4.1.7342.2.1.3.1.59
Enable or disable BOOTP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tftpEnable 1.3.6.1.4.1.7342.2.1.3.1.60
Enable or disable TFTP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tftpServerIpAddress 1.3.6.1.4.1.7342.2.1.3.1.61
TFTP server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcptftpServerIpAddress 1.3.6.1.4.1.7342.2.1.3.1.62
TFTP Server IP address as assigned by a DHCP Server
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

tftpFileName 1.3.6.1.4.1.7342.2.1.3.1.63
Selects the TFTP file name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..23)  

modeType 1.3.6.1.4.1.7342.2.1.3.1.64
Sets the module Mode Type to normal, AP, or SP.
Status: current Access: read-write
OBJECT-TYPE    
  OstModeType  

dhcpPortNumber 1.3.6.1.4.1.7342.2.1.3.1.65
Sets the DHCP port number. 2 port module: 1=None, 2=Port 1, 3=Port 2, 4=BP A, 5=BP B 3 port module: 1=None, 2=Port 1, 3=Port 2, 4=Port 3, 5=BP A, 6=BP B 5 ports and higher modules: 1=None, 2..n+1 = Port 1..n
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dhcpTagVid 1.3.6.1.4.1.7342.2.1.3.1.66
Sets the DHCP Tag VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  OstVlanId  

trapSrcIpSelect 1.3.6.1.4.1.7342.2.1.3.1.67
Selects the trap source address, IP1(1) or IP2(2).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2  

muxGroupDefaults 1.3.6.1.4.1.7342.2.1.3.1.68
This object when written sets the Mux Grouping defaults for a management module. When read the value always returns 'false'. Writing this sets the Mux Group EVC and bandwidth profile configurations.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

portFwdCpu 1.3.6.1.4.1.7342.2.1.3.1.69
This object enables forwarding of managment traffic from the selected ports only for M2 modules only. Management traffic from ports not defined is dropped. all(0) Management traffic forwarded from all ports port1(1) Management traffic forwarded from Port 1 only port2(2) Management traffic forwarded from Port 2 only backplaneA(3) Management traffic forwarded from BP A only backplaneB(4) Management traffic forwarded from BP B only
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(0), port1(1), port2(2), backplaneA(3), backplaneB(4)  

portFwdCpuList 1.3.6.1.4.1.7342.2.1.3.1.70
This object enables forwarding of managment traffic from the selected ports only for M3, M4, and M5 modules only. Management traffic from ports not defined is dropped.
Status: current Access: read-write
OBJECT-TYPE    
  OstPortList  

modulePortsTable 1.3.6.1.4.1.7342.2.1.4
This a table of Ports per module. There are as many entries as specified by modnumports in the moduleEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModulePortsEntry

modulePortsEntry 1.3.6.1.4.1.7342.2.1.4.1
Ports per module table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ModulePortsEntry  

portnum 1.3.6.1.4.1.7342.2.1.4.1.1
Used to get or set state of port.
Status: current Access: not-accessible
OBJECT-TYPE    
  OstPortNumber  

portState 1.3.6.1.4.1.7342.2.1.4.1.2
Used to get or set state of port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER undefined(0), disabled(1), enabled(2), unused(3)  

portEgressRate 1.3.6.1.4.1.7342.2.1.4.1.3
Used to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps 1 = 128 kbps 2 = 256 kbps 3 = 512 kbps 4 = 1 Mbps 5 = 2 Mbps 6 = 4 Mbps 7 = 8 Mbps Used on types 100, 101 (lower limit=1, upper limit=20) where: 1 = 64 kbps 2 = 128 kbps 3 = 256 kbps 4 = 512 kbps 5 = 768 kbps 6 = 1 Mbps 7 = 2 Mbps 8 = 3 Mbps 9 = 4 Mbps 10 = 5 Mbps 11 = 6 Mbps 12 = 7 Mbps 13 = 8 Mbps 14 = 9 Mbps 15 = 10 Mbps 16 = 20 Mbps 17 = 30 Mbps 18 = 40 Mbps 19 = 50 Mbps 20 = 100 Mbps Used on types 105, 106 (lower limit=1, upper limit=33) 1 = 64 kbps 2 = 128 kbps 3 = 256 kbps 4 = 512 kbps 5 = 768 kbps 6 = 1 Mbps 7 = 2 Mbps 8 = 3 Mbps 9 = 4 Mbps 10 = 5 Mbps 11 = 6 Mbps 12 = 7 Mbps 13 = 8 Mbps 14 = 9 Mbps 15 = 10 Mbps 16 = 20 Mbps 17 = 30 Mbps 18 = 40 Mbps 19 = 50 Mbps 20 = 60 Mbps 21 = 70 Mbps 22 = 80 Mbps 23 = 90 Mbps 24 = 100 Mbps 25 = 200 Mbps 26 = 300 Mbps 27 = 400 Mbps 28 = 500 Mbps 29 = 600 Mbps 30 = 700 Mbps 31 = 800 Mbps 32 = 900 Mbps 33 = 1000 Mbps Types 97, 99, 102, 108, 109, 112, 113 use numeric values in kpbs with a lower limit of 64 and an upper limit of 1,000,000. Types not listed have no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portpriority 1.3.6.1.4.1.7342.2.1.4.1.4
Used to get or set port user-priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

portcanonicalformatIndicator 1.3.6.1.4.1.7342.2.1.4.1.5
Used to get or set port cfi. Currently not used and defaulted to 0
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

portvlanidentifier 1.3.6.1.4.1.7342.2.1.4.1.6
Used to get or set port VID.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4095  

portmlistcriteria 1.3.6.1.4.1.7342.2.1.4.1.7
Used to get or set port membership criteria.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

portingresssecurity 1.3.6.1.4.1.7342.2.1.4.1.8
Used to get or set port ingress security.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

portegresspolicy 1.3.6.1.4.1.7342.2.1.4.1.9
Used to get or set port egress policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

portIngressRate 1.3.6.1.4.1.7342.2.1.4.1.10
Used to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps 1 = 128 kbps 2 = 256 kbps 3 = 512 kbps 4 = 1 Mbps 5 = 2 Mbps 6 = 4 Mbps 7 = 8 Mbps Used on types 100, 101 (lower limit=64, upper limit=100,000) Values are number of kbps per second, i.e. rate = value x 1000, units in bps Used on types 97, 99, 102, 105, 106, 108, 109, 112, 113 (lower limit=64, upper limit=1,000,000) Values are number of kbps per second, i.e. rate = value x 1000, units in bps Types not listed have no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portSpeed 1.3.6.1.4.1.7342.2.1.4.1.11
Used to get the port speed. 0 = undefined 1 = speed10Mbps 2 = speed100Mbps 3 = speed1Gbps 4 = speed10Gbps
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4  

portUnidirectionalAhOamEnable 1.3.6.1.4.1.7342.2.1.4.1.12
Used to get/set the unidirectional support. 0 = uniDisabled 1 = uniEnabled
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

portIngressRateDropOrPause 1.3.6.1.4.1.7342.2.1.4.1.13
Used to get/set behavior on overflow. 0 = undefined 1 = inDrop 2 = inPause
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2  

portIngressRateCBS 1.3.6.1.4.1.7342.2.1.4.1.14
Used to get or set the port throughput limit selection.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..256000  

portL2CPmgntProcessing 1.3.6.1.4.1.7342.2.1.4.1.15
Used to get or set the port L2Cp processing method. 0 = undefined 1 = inDrop 2 = inForward 3 = inTunnel
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

portEgressQosPolicy 1.3.6.1.4.1.7342.2.1.4.1.16
Used to get or set the port egress QoS Policy. 0 = undefined 1 = fairWeight 2 = starving
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2  

portAccessType 1.3.6.1.4.1.7342.2.1.4.1.17
Used to get or set the port access type. 0 = undefined 1 = tunnel 2 = access 3 = trunk
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

portStatsClear 1.3.6.1.4.1.7342.2.1.4.1.18
Used to clear the statistics table for this port
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

portLinkState 1.3.6.1.4.1.7342.2.1.4.1.19
Reports the link state of the port. 0 = No link 1 = Linked
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

portDuplex 1.3.6.1.4.1.7342.2.1.4.1.20
The object indcates the linked port duplex mode. undefined(0) Port is not linked or state of duplex is unknown halfDuplex(1) Port is linked at half duplex fullDuplex(2) Port is linked at full duplex
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(0), halfDuplex(1), fullDuplex(2)  

portMacAddress 1.3.6.1.4.1.7342.2.1.4.1.21
MAC address of the port. If a MAC address doesn't exist on a port the value returned is all zeros.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(17)  

portStatsTable 1.3.6.1.4.1.7342.2.1.5
This a table of Statistics per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsEntry

portStatsEntry 1.3.6.1.4.1.7342.2.1.5.1
extended module statitical information.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortStatsEntry  

txOctets 1.3.6.1.4.1.7342.2.1.5.1.1
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txDropPkts 1.3.6.1.4.1.7342.2.1.5.1.2
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txBroadcastPkts 1.3.6.1.4.1.7342.2.1.5.1.3
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txMulticastPkts 1.3.6.1.4.1.7342.2.1.5.1.4
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txUnicastPkts 1.3.6.1.4.1.7342.2.1.5.1.5
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txGoodPkts 1.3.6.1.4.1.7342.2.1.5.1.6
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txErrorPkts 1.3.6.1.4.1.7342.2.1.5.1.7
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txPausePkts 1.3.6.1.4.1.7342.2.1.5.1.8
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txCollisions 1.3.6.1.4.1.7342.2.1.5.1.9
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txSingleCollision 1.3.6.1.4.1.7342.2.1.5.1.10
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txMultipleCollision 1.3.6.1.4.1.7342.2.1.5.1.11
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txDeferedTransmit 1.3.6.1.4.1.7342.2.1.5.1.12
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txLateCollision 1.3.6.1.4.1.7342.2.1.5.1.13
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txExcessiveCollision 1.3.6.1.4.1.7342.2.1.5.1.14
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txDroppedEvents 1.3.6.1.4.1.7342.2.1.5.1.15
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxOctets 1.3.6.1.4.1.7342.2.1.5.1.16
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxDropPkts 1.3.6.1.4.1.7342.2.1.5.1.17
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxBroadcastPkts 1.3.6.1.4.1.7342.2.1.5.1.18
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxMulticastPkts 1.3.6.1.4.1.7342.2.1.5.1.19
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxUnicastPkts 1.3.6.1.4.1.7342.2.1.5.1.20
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxGoodPkts 1.3.6.1.4.1.7342.2.1.5.1.21
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxTotalPkts 1.3.6.1.4.1.7342.2.1.5.1.22
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxErrorPkts 1.3.6.1.4.1.7342.2.1.5.1.23
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPausePkts 1.3.6.1.4.1.7342.2.1.5.1.24
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxUndersizePkts 1.3.6.1.4.1.7342.2.1.5.1.25
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxOversizePkts 1.3.6.1.4.1.7342.2.1.5.1.26
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxFragments 1.3.6.1.4.1.7342.2.1.5.1.27
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxJabbers 1.3.6.1.4.1.7342.2.1.5.1.28
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxAlignmentErrors 1.3.6.1.4.1.7342.2.1.5.1.29
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxFCSErrors 1.3.6.1.4.1.7342.2.1.5.1.30
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxSymbolErrors 1.3.6.1.4.1.7342.2.1.5.1.31
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxCRCAlignErrors 1.3.6.1.4.1.7342.2.1.5.1.32
Statistics counter - Object name explains its usage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPackets64 1.3.6.1.4.1.7342.2.1.5.1.33
Statistics counter - packets of octet count in object name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPackets65to127 1.3.6.1.4.1.7342.2.1.5.1.34
Statistics counter - packets of octet count in object name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPackets128to255 1.3.6.1.4.1.7342.2.1.5.1.35
Statistics counter - packets of octet count in object name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPackets256to511 1.3.6.1.4.1.7342.2.1.5.1.36
Statistics counter - packets of octet count in object name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPackets512to1023 1.3.6.1.4.1.7342.2.1.5.1.37
Statistics counter - packets of octet count in object name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxPackets1024to1518 1.3.6.1.4.1.7342.2.1.5.1.38
Statistics counter - packets of octet count in object name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txOctets64 1.3.6.1.4.1.7342.2.1.5.1.39
64 bit octet transmission counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rxOctets64 1.3.6.1.4.1.7342.2.1.5.1.40
64 bit octet receive counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

moduleVLANTable 1.3.6.1.4.1.7342.2.1.6
This a table of VLAN entries per module. There is a maximum of 64 valid entries in the table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModuleVLANEntry

moduleVLANEntry 1.3.6.1.4.1.7342.2.1.6.1
VLAN module table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ModuleVLANEntry  

index 1.3.6.1.4.1.7342.2.1.6.1.1
Used to get or set elements in the vlan table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

validityflag 1.3.6.1.4.1.7342.2.1.6.1.2
Used to set or delete a VLAN table entry. 0 = entry does not exists or is to be deleted, 1 = entry to be created or re-activated (in the case the entry was modified, the module needs to be notified of the change. This would constitute a re-activation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

vlanidentifier 1.3.6.1.4.1.7342.2.1.6.1.3
Used to set or get the vlan identifier. valid settable range is 0-4095
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4095  

port1Membership 1.3.6.1.4.1.7342.2.1.6.1.4
Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

port2Membership 1.3.6.1.4.1.7342.2.1.6.1.5
Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

port3Membership 1.3.6.1.4.1.7342.2.1.6.1.6
Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

port4Membership 1.3.6.1.4.1.7342.2.1.6.1.7
Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

port5Membership 1.3.6.1.4.1.7342.2.1.6.1.8
Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

port6Membership 1.3.6.1.4.1.7342.2.1.6.1.9
Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

portAHTable 1.3.6.1.4.1.7342.2.1.7
This is a table of AH parameter entries per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortAHEntry

portAHEntry 1.3.6.1.4.1.7342.2.1.7.1
AH port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortAHEntry  

ahEnabled 1.3.6.1.4.1.7342.2.1.7.1.1
Used to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

ahLpbkMode 1.3.6.1.4.1.7342.2.1.7.1.2
Used to get or set the state of the OAM remote loopback. 0 = off - remote loopback is not active 1 = on - remote loopback has been activated
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

ahLocalMode 1.3.6.1.4.1.7342.2.1.7.1.3
Used to get or set the mode AH OAM Client. 0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks 2 = PASSIVE, PROTECTED - Same as PASSIVE but disallows configuration requests from link partner using AH extensions 3 = ACTIVE, PROTECTED - Same as ACTIVE but disallows configuration requests from link partner using AH extensions
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

ahRemoteMode 1.3.6.1.4.1.7342.2.1.7.1.4
Used to get or set the mode AH OAM Client. 0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks 2 = PASSIVE, PROTECTED - Same as PASSIVE but disallows configuration requests from link partner using AH extensions 3 = ACTIVE, PROTECTED - Same as ACTIVE but disallows configuration requests from link partner using AH extensions
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3  

ahLocalMuxState 1.3.6.1.4.1.7342.2.1.7.1.5
Used to get local multiplexer state. 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

ahRemoteMuxState 1.3.6.1.4.1.7342.2.1.7.1.6
Used to get remote multiplexer state. 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

ahLocalParserState 1.3.6.1.4.1.7342.2.1.7.1.7
Used to get local parser state. 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test 2 = DISCARD - Parser discards received non-OAMPDUs
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2  

ahRemoteParserState 1.3.6.1.4.1.7342.2.1.7.1.8
Used to get remote parser state. 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test 2 = DISCARD - Parser discards received non-OAMPDUs
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2  

ahLocalSupportVar 1.3.6.1.4.1.7342.2.1.7.1.9
Used to get local configured features supported in bit encoded value. where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = interprets link events bit4 = Variable Retrieval bit5 = Critical Event
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

ahLocalLinkFlags 1.3.6.1.4.1.7342.2.1.7.1.10
Used to get Link Event status in bit encoded value. where: bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 = Remote Evaluating bit6 = Remote Stable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..127  

ahLocalLpbkTimeout 1.3.6.1.4.1.7342.2.1.7.1.11
Used to get/set Remote Loopback timeout. Value is in seconds with range 0 - 300.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

ahRemoteSupportVar 1.3.6.1.4.1.7342.2.1.7.1.12
Used to get remote configured features supported in bit encoded value. where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = interprets link events bit4 = Variable Retrieval bit5 = Critical Event
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

ahRemoteLinkFlags 1.3.6.1.4.1.7342.2.1.7.1.13
Used to get Link Event status in bit encoded value. bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 = Remote Evaluating bit6 = Remote Stable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..127  

ahRemoteLpbkTimeout 1.3.6.1.4.1.7342.2.1.7.1.14
Used to get/set Remote Loopback timeout. Value is in seconds with range 0 - 300.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..300  

ahLocalOUI 1.3.6.1.4.1.7342.2.1.7.1.15
Used to get the Organizational Unique ID of the local port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

ahRemoteOUI 1.3.6.1.4.1.7342.2.1.7.1.16
Used to get the Organizational Unique ID of the remote port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

ahErroredSymbolPeriodWindow 1.3.6.1.4.1.7342.2.1.7.1.17
Used to get or set errored symbol period window for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

ahErroredSymbolPeriodThreshold 1.3.6.1.4.1.7342.2.1.7.1.18
Used to get or set errored symbol period threshold for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

ahErroredFrameWindow 1.3.6.1.4.1.7342.2.1.7.1.19
Used to get or set the errored symbol window for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

ahErroredFrameThreshold 1.3.6.1.4.1.7342.2.1.7.1.20
Used to get or set the errored symbol threshold for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

ahErroredFramePeriodWindow 1.3.6.1.4.1.7342.2.1.7.1.21
Used to get or set the errored frame period window for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

ahErroredFramePeriodThreshold 1.3.6.1.4.1.7342.2.1.7.1.22
Used to get or set the errored frame period threshold for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

ahErroredFrameSecondsWindow 1.3.6.1.4.1.7342.2.1.7.1.23
Used to get or set the errored frame seconds window for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..900  

ahErroredFrameSecondsThreshold 1.3.6.1.4.1.7342.2.1.7.1.24
Used to get or set the errored frame seconds threshold for the local port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

ahRemoteLinkPort 1.3.6.1.4.1.7342.2.1.7.1.25
Used to get the port number of the remote partner. Value is in the Range 1-5. A zero port number indicates no connection or not supported
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..5  

ahSymbolErrorRunningTotal 1.3.6.1.4.1.7342.2.1.7.1.26
This object indicates the 802.3ah Symbol Error Running Total value from the last OAM sublayer reset or clear operation. A value of zero indicates that no symbol errors have been detected since the last reset or clear. For each symbol error detected the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahSymbolErrorEventTotal 1.3.6.1.4.1.7342.2.1.7.1.27
This object indicates the number of 802.3ah Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no Errored Symbol Period Event TLVs have been generated. For each Errored Symbol Period Event TLV generated the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahFrameErrorRunningTotal 1.3.6.1.4.1.7342.2.1.7.1.28
This object indicates the sum of the 802.3ah errored frames that have been detected since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frames have been detected since the last reset or clear. For each errored frame the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahFrameErrorEventTotal 1.3.6.1.4.1.7342.2.1.7.1.29
This object indicates the number of 802.3ah Errored Frame Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no Errored Frame Event TLVs have been generated. For each Errored Frame Event Event TLV generated the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahFramePeriodRunningTotal 1.3.6.1.4.1.7342.2.1.7.1.30
This object indicates the sum of 802.3ah the frame errors that have been detected that have been since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frames have been detected since the last reset or clear. For each errored frame the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahFramePeriodEventTotal 1.3.6.1.4.1.7342.2.1.7.1.31
This object indicates the number of 802.3ah Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no Errored Frame Period Event TLVs have been generated. For each Errored Symbol Period Event TLV generated the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahFrameSecondsSummaryRunningTotal 1.3.6.1.4.1.7342.2.1.7.1.32
This object indicates the sum of the 802.3ah errored frame seconds that have been detected that have been since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frame seconds have been detected since the last reset or clear. For each errored frame the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahFrameSecondsSummaryEventTotal 1.3.6.1.4.1.7342.2.1.7.1.33
This object indicates the number of 802.3ah Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no Errored Frame Seconds Summary Event TLVs have been generated. For each Errored Symbol Period Event TLV generated the value of the object increments.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ahClearStatistics 1.3.6.1.4.1.7342.2.1.7.1.34
This object when written clears the 802.3ah statistic counters associated with a specific port. When read the value always returns 'false'. Writing this value does not change any items in the configuration table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ahTransmissionRate 1.3.6.1.4.1.7342.2.1.7.1.35
This object sets maximum 802.3ah PDU transmission rate. The default value is 10 (10 frames per second)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..100  

ahCriticalEventMode 1.3.6.1.4.1.7342.2.1.7.1.36
Used to get or set the state of the local critical event mode. 0 = local critical events not enabled 1 = local critical events are enabled
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

ahCriticalEventTrapList 1.3.6.1.4.1.7342.2.1.7.1.37
Used to the SNMP traps which will cause the generation of a local critical event. It is a list of zero or more trap numbers separated by a comma or range, '..'. Example values: 5 5,110,112 100..110 5,110,90..95,100..105 The default value is an emtpy string, no SNMP traps generate a local critical event.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..45)  

portSFPTable 1.3.6.1.4.1.7342.2.1.8
This is a table of AH parameter entries per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortSFPEntry

portSFPEntry 1.3.6.1.4.1.7342.2.1.8.1
SFP port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortSFPEntry  

portSFPstatus 1.3.6.1.4.1.7342.2.1.8.1.1
Used to get present or absence of SFP device. 0 = undefined 1 = notPresent 2 = present
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2  

portSFPpageA0 1.3.6.1.4.1.7342.2.1.8.1.2
Used to get SFP device EEPROM address A0
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

portSFPpageA2 1.3.6.1.4.1.7342.2.1.8.1.3
Used to get SFP device EEPROM address A2
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(256)  

portSfpBitRate 1.3.6.1.4.1.7342.2.1.8.1.4
SFP Bitrate in Mbps
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

portSfpVendorName 1.3.6.1.4.1.7342.2.1.8.1.5
SFP Vendor Name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

portSfpVendorPartNumber 1.3.6.1.4.1.7342.2.1.8.1.6
SFP Vendor Name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

portSfpVendorSerialNumber 1.3.6.1.4.1.7342.2.1.8.1.7
SFP Serial Number
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

portSfpDateCode 1.3.6.1.4.1.7342.2.1.8.1.8
SFP Date Code
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

portSfpTemperature 1.3.6.1.4.1.7342.2.1.8.1.9
SFP tempearture in degrees Centigrade
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

portSfpVcc 1.3.6.1.4.1.7342.2.1.8.1.10
SFP VCC in volts
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

portSfpBiasCurrent 1.3.6.1.4.1.7342.2.1.8.1.11
SFP Bias Current in millamps
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

portSfpTxPower 1.3.6.1.4.1.7342.2.1.8.1.12
SFP Transmission power in dBm
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

portSfpRxPower 1.3.6.1.4.1.7342.2.1.8.1.13
SFP Transmission power in dBm
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

userTable 1.3.6.1.4.1.7342.2.1.9
This is a table of SNMPv3 users.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserEntry

userEntry 1.3.6.1.4.1.7342.2.1.9.1
User table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  UserEntry  

userIndex 1.3.6.1.4.1.7342.2.1.9.1.1
User table index
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4  

snmpv3UserName 1.3.6.1.4.1.7342.2.1.9.1.2
SNMPv3 user name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

snmpv3SecurityLevel 1.3.6.1.4.1.7342.2.1.9.1.3
SNMPv3 security level 0 = undefined 1 = no authentication/no privacy 2 = authentication/no privacy 3 = authentication/privacy
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

snmpv3AuthPassword 1.3.6.1.4.1.7342.2.1.9.1.4
SNMPv3 user authentication password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

snmpv3PrivPassword 1.3.6.1.4.1.7342.2.1.9.1.5
SNMPv3 user privacy password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

snmpv3UserType 1.3.6.1.4.1.7342.2.1.9.1.6
SNMPv3 User Type 0 = undefined 1 = admin 2 = read-write 3 = read-only 4 = deny
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4  

ostProtocolStatusTable 1.3.6.1.4.1.7342.2.1.10
This table supports the Serial, Telnet, FTP user session status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OstProtocolStatusEntry

ostProtocolStatusEntry 1.3.6.1.4.1.7342.2.1.10.1
This is a user protocol table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  OstProtocolStatusEntry  

ostProtocolStatusIndex 1.3.6.1.4.1.7342.2.1.10.1.1
An index that is used to identify a specific user protocol session. The index should remain constant until the session is closed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

ostProtocolStatusType 1.3.6.1.4.1.7342.2.1.10.1.2
This object indicates the specific user protocol session identity state. serial (1) User protocol session type is the serial port telnet (2) User protocol session type is TELNET ftp (3) User protocol session type is FTP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER serial(1), telnet(2), ftp(3)  

ostProtocolStatusState 1.3.6.1.4.1.7342.2.1.10.1.3
This object indicates the status of the specific user protocol session state. inactive(1) User is currently inactive (reserved value, not used) active(2) User is currently authenticated and active lockedout(3) User is currently locked out for authentication and cannot become active until the locked out timeout expires and the user status goes back to idle.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), lockedout(3)  

ostProtocoManagementPort 1.3.6.1.4.1.7342.2.1.10.1.4
This object indicates the status of the specific user protocol session state. It is not applicable to the 'serial' interface or to a session type that is locked out. In these cases the object is returned with a value of 'notDefined'. notDefined(1) Management port is unknown or undefined mgt1(2) Management Port 1 association mgt2(3) Management Port 2 association
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notDefined(1), mgt1(2), mgt2(3)  

ostProtocolStatusIpAddress 1.3.6.1.4.1.7342.2.1.10.1.5
This object indicates the IP address of the specific user protocol session. It is not applicable to the 'serial' interface or to a session type that is locked out. In these cases this object is returned as '0.0.0.0'.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ostProtocolStatusSessionOpenLockTime 1.3.6.1.4.1.7342.2.1.10.1.6
The object indicates the time a specific user protocol session has been open or is locked out, in 0.01 seconds, based upon the value of ostProtocolStatusState.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

ostEnvironmentalStatusTable 1.3.6.1.4.1.7342.2.1.11
This table supports the module environmental status objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OstEnvironmentalStatusEntry

ostEnvironmentalStatusEntry 1.3.6.1.4.1.7342.2.1.11.1
This is an environmental table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  OstEnvironmentalStatusEntry  

ostEnvironmentalPs1Status 1.3.6.1.4.1.7342.2.1.11.1.1
This object indicates the status of Power Supply PS1 or PSA. notApplicable(0) Power Supply PS1/PSA is not supported notInstalled(1) Power Supply PS1/PSA is not installed installedNotPowered(2) Power Supply PS1/PSA is installed, but not powered installedPowered(3) Power Supply PS1/PSA is installed and powered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), notInstalled(1), installedNotPowered(2), installedPowered(3)  

ostEnvironmentalPs1VoltageIn 1.3.6.1.4.1.7342.2.1.11.1.2
This object indicates PS1/PSA voltage input in millivolts. A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a voltage input reading.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ostEnvironmentalPs1VoltageOut 1.3.6.1.4.1.7342.2.1.11.1.3
This object indicates PS1/PSA voltage output in millivolts. A value of zero indicates that no voltage is output or the power supply is incapable of supplying a voltage output reading.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ostEnvironmentalPs1CurrentOut 1.3.6.1.4.1.7342.2.1.11.1.4
This object indicates PS1/PSA current output in millianmps. A value of zero indicates that no current is output or the power supply is incapable of supplying a current output reading.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ostEnvironmentalPs2Status 1.3.6.1.4.1.7342.2.1.11.1.5
This object indicates the status of Power Supply PS2 or PSB. notApplicable(0) Power Supply PS2/PSB is not supported notInstalled(1) Power Supply PS2/PSB is not installed installedNotPowered(2) Power Supply PS2/PSB is installed, but not powered installedPowered(3) Power Supply PS2/PSB is installed and powered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), notInstalled(1), installedNotPowered(2), installedPowered(3)  

ostEnvironmentalPs2VoltageIn 1.3.6.1.4.1.7342.2.1.11.1.6
This object indicates PS2/PSB voltage input in millivolts. A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a voltage input reading.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ostEnvironmentalPs2VoltageOut 1.3.6.1.4.1.7342.2.1.11.1.7
This object indicates PS2/PSB voltage output in millivolts. A value of zero indicates that no voltage is output or the power supply is incapable of supplying a voltage output reading.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ostEnvironmentalPs2CurrentOut 1.3.6.1.4.1.7342.2.1.11.1.8
This object indicates PS2/PSB current output in millianmps. A value of zero indicates that no current is output or the power supply is incapable of supplying a current output reading.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ostEnvironmentalTemperature 1.3.6.1.4.1.7342.2.1.11.1.9
This object indicates the module internal ambient temperature in degrees centigrade. A value of zero indicates that the current temperature is 0 degrees or the module incapable of supplying a temperature reading.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ostEnvironmentalFan1Status 1.3.6.1.4.1.7342.2.1.11.1.10
This object indicates the status of Fan 1. notApplicable(0) Fan 1 is not supported notInstalled(1) Fan 1 is not installed installedNotPowered(2) Fan 1 is installed, but not powered installedPowered(3) Fan 1 is installed and powered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), notInstalled(1), installedNotPowered(2), installedPowered(3)  

ostEnvironmentalFan1Speed 1.3.6.1.4.1.7342.2.1.11.1.11
This object indicates the speed of Fan 1 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ostEnvironmentalFan2Status 1.3.6.1.4.1.7342.2.1.11.1.12
This object indicates the status of Fan 2. notApplicable(0) Fan 2 is not supported notInstalled(1) Fan 2 is not installed installedNotPowered(2) Fan 2 is installed, but not powered installedPowered(3) Fan 2 is installed and powered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), notInstalled(1), installedNotPowered(2), installedPowered(3)  

ostEnvironmentalFan2Speed 1.3.6.1.4.1.7342.2.1.11.1.13
This object indicates the speed of Fan 2 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ostEnvironmentalFan3Status 1.3.6.1.4.1.7342.2.1.11.1.14
This object indicates the status of Fan 3. notApplicable(0) Fan 3 is not supported notInstalled(1) Fan 3 is not installed installedNotPowered(2) Fan 3 is installed, but not powered installedPowered(3) Fan 3 is installed and powered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), notInstalled(1), installedNotPowered(2), installedPowered(3)  

ostEnvironmentalFan3Speed 1.3.6.1.4.1.7342.2.1.11.1.15
This object indicates the speed of Fan 3 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

omnitronCompliances 1.3.6.1.4.1.7342.4.1
OBJECT IDENTIFIER    

omnitronGroups 1.3.6.1.4.1.7342.4.2
OBJECT IDENTIFIER    

omnitronCompliance 1.3.6.1.4.1.7342.4.1.1
The compliance statement for OMNITRON iConverter modules.
Status: current Access: read-only
MODULE-COMPLIANCE    

omnitronGroup 1.3.6.1.4.1.7342.4.2.1
A collection of Omnitron objects.
Status: current Access: read-only
OBJECT-GROUP    

omnitronSFPGroup 1.3.6.1.4.1.7342.4.2.2
A collection of Omnitron port SFP objects.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor