OMNI-gx2Lm1000s-MIB

File: OMNI-gx2Lm1000s-MIB.mib (75722 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215 NLS-BBNIDENT-MIB GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress TimeTicks Counter
OBJECT-TYPE sysUpTime DisplayString
TRAP-TYPE gi motproxies
gx2Lm1000s trapIdentifier trapNetworkElemModelNumber
trapNetworkElemSerialNum trapPerceivedSeverity trapNetworkElemOperState
trapNetworkElemAlarmStatus trapNetworkElemAdminState trapNetworkElemAvailStatus
trapText trapNETrapLastTrapTimeStamp trapChangedObjectId
trapChangedValueInteger trapChangedValueDisplayString

Defined Types

Float  
Counter    

Gx2Lm1000sAnalogEntry  
SEQUENCE    
  gx2Lm1000sAnalogTableIndex INTEGER
  lm1000slabelOffsetNomMonitor DisplayString Size(0..80)
  lm1000suomOffsetNomMonitor DisplayString Size(0..80)
  lm1000smajorHighOffsetNomMonitor Float
  lm1000smajorLowOffsetNomMonitor Float
  lm1000sminorHighOffsetNomMonitor Float
  lm1000sminorLowOffsetNomMonitor Float
  lm1000scurrentValueOffsetNomMonitor Float
  lm1000sstateFlagOffsetNomMonitor INTEGER
  lm1000sminValueOffsetNomMonitor Float
  lm1000smaxValueOffsetNomMonitor Float
  lm1000salarmStateOffsetNomMonitor INTEGER
  lm1000slabelLaserPower DisplayString Size(0..80)
  lm1000suomLaserPower DisplayString Size(0..80)
  lm1000smajorHighLaserPower Float
  lm1000smajorLowLaserPower Float
  lm1000sminorHighLaserPower Float
  lm1000sminorLowLaserPower Float
  lm1000scurrentValueLaserPower Float
  lm1000sstateFlagLaserPower INTEGER
  lm1000sminValueLaserPower Float
  lm1000smaxValueLaserPower Float
  lm1000salarmStateLaserPower INTEGER
  lm1000slabelLaserTemp DisplayString Size(0..80)
  lm1000suomLaserTemp DisplayString Size(0..80)
  lm1000smajorHighLaserTemp Float
  lm1000smajorLowLaserTemp Float
  lm1000sminorHighLaserTemp Float
  lm1000sminorLowLaserTemp Float
  lm1000scurrentValueLaserTemp Float
  lm1000sstateFlagLaserTemp INTEGER
  lm1000sminValueLaserTemp Float
  lm1000smaxValueLaserTemp Float
  lm1000salarmStateLaserTemp INTEGER
  lm1000slabelLaserCurrent DisplayString Size(0..80)
  lm1000suomLaserCurrent DisplayString Size(0..80)
  lm1000smajorHighLaserCurrent Float
  lm1000smajorLowLaserCurrent Float
  lm1000sminorHighLaserCurrent Float
  lm1000sminorLowLaserCurrent Float
  lm1000scurrentValueLaserCurrent Float
  lm1000sstateFlagLaserCurrent INTEGER
  lm1000sminValueLaserCurrent Float
  lm1000smaxValueLaserCurrent Float
  lm1000salarmStateLaserCurrent INTEGER
  lm1000slabelTecCurrent DisplayString Size(0..80)
  lm1000suomTecCurrent DisplayString Size(0..80)
  lm1000smajorHighTecCurrent Float
  lm1000smajorLowTecCurrent Float
  lm1000sminorHighTecCurrent Float
  lm1000sminorLowTecCurrent Float
  lm1000scurrentValueTecCurrent Float
  lm1000sstateFlagTecCurrent INTEGER
  lm1000sminValueTecCurrent Float
  lm1000smaxValueTecCurrent Float
  lm1000salarmStateTecCurrent INTEGER
  lm1000slabelModTemp DisplayString Size(0..80)
  lm1000suomModTemp DisplayString Size(0..80)
  lm1000smajorHighModTemp Float
  lm1000smajorLowModTemp Float
  lm1000sminorHighModTemp Float
  lm1000sminorLowModTemp Float
  lm1000scurrentValueModTemp Float
  lm1000sstateFlagModTemp INTEGER
  lm1000sminValueModTemp Float
  lm1000smaxValueModTemp Float
  lm1000salarmStateModTemp INTEGER
  lm1000slabelFanCurrent DisplayString Size(0..80)
  lm1000suomFanCurrent DisplayString Size(0..80)
  lm1000smajorHighFanCurrent Float
  lm1000smajorLowFanCurrent Float
  lm1000sminorHighFanCurrent Float
  lm1000sminorLowFanCurrent Float
  lm1000scurrentValueFanCurrent Float
  lm1000sstateFlagFanCurrent INTEGER
  lm1000sminValueFanCurrent Float
  lm1000smaxValueFanCurrent Float
  lm1000salarmStateFanCurrent INTEGER

Gx2Lm1000sDigitalEntry  
SEQUENCE    
  gx2Lm1000sDigitalTableIndex INTEGER
  lm1000slabelRfInput DisplayString Size(0..80)
  lm1000senumRfInput DisplayString Size(0..80)
  lm1000svalueRfInput INTEGER
  lm1000sstateflagRfInput INTEGER
  lm1000slabelOptOutput DisplayString Size(0..80)
  lm1000senumOptOutput DisplayString Size(0..80)
  lm1000svalueOptOutput INTEGER
  lm1000sstateflagOptOutput INTEGER
  lm1000slabelAttnSetting DisplayString Size(0..80)
  lm1000senumAttnSetting DisplayString Size(0..80)
  lm1000svalueAttnSetting INTEGER
  lm1000sstateflagAttnSetting INTEGER
  lm1000slabelFactoryDefault DisplayString Size(0..80)
  lm1000senumFactoryDefault DisplayString Size(0..80)
  lm1000svalueFactoryDefault INTEGER
  lm1000sstateflagFactoryDefault INTEGER

Gx2Lm1000sStatusEntry  
SEQUENCE    
  gx2Lm1000sStatusTableIndex INTEGER
  lm1000slabelBoot DisplayString Size(0..80)
  lm1000svalueBoot INTEGER
  lm1000sstateflagBoot INTEGER
  lm1000slabelFlash DisplayString Size(0..80)
  lm1000svalueFlash INTEGER
  lm1000sstateflagFlash INTEGER
  lm1000slabelFactoryDataCRC DisplayString Size(0..80)
  lm1000svalueFactoryDataCRC INTEGER
  lm1000sstateflagFactoryDataCRC INTEGER
  lm1000slabelLaserDataCRC DisplayString Size(0..80)
  lm1000svalueLaserDataCRC INTEGER
  lm1000sstateflagLaserDataCRC INTEGER
  lm1000slabelAlarmDataCrc DisplayString Size(0..80)
  lm1000svalueAlarmDataCrc INTEGER
  lm1000sstateflagAlarmDataCrc INTEGER
  lm1000slabelRFInputStatus DisplayString Size(0..80)
  lm1000svalueRFInputStatus INTEGER
  lm1000sstateflagRFInputStatus INTEGER

Gx2Lm1000sFactoryEntry  
SEQUENCE    
  gx2Lm1000sFactoryTableIndex INTEGER
  lm1000sbootControlByte INTEGER
  lm1000sbootStatusByte INTEGER
  lm1000sbank1CRC INTEGER
  lm1000sbank2CRC INTEGER
  lm1000sprgEEPROMByte INTEGER
  lm1000sfactoryCRC INTEGER
  lm1000scalculateCRC INTEGER
  lm1000shourMeter INTEGER
  lm1000sflashPrgCntA INTEGER
  lm1000sflashPrgCntB INTEGER
  lm1000sflashBankARev DisplayString Size(0..80)
  lm1000sflashBankBRev DisplayString Size(0..80)

Defined Values

gx2Lm1000sDescriptor 1.3.6.1.4.1.1166.6.1.2.31.1
OBJECT IDENTIFIER    

gx2Lm1000sAnalogTable 1.3.6.1.4.1.1166.6.1.2.31.2
This table contains gx2Lm1000s specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Lm1000sAnalogEntry

gx2Lm1000sAnalogEntry 1.3.6.1.4.1.1166.6.1.2.31.2.1
This list contains the analog parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Lm1000sAnalogEntry  

gx2Lm1000sDigitalTable 1.3.6.1.4.1.1166.6.1.2.31.3
This table contains gx2Lm1000sm specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Lm1000sDigitalEntry

gx2Lm1000sDigitalEntry 1.3.6.1.4.1.1166.6.1.2.31.3.2
This list contains digital parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Lm1000sDigitalEntry  

gx2Lm1000sStatusTable 1.3.6.1.4.1.1166.6.1.2.31.4
This table contains gx2Lm1000s specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Lm1000sStatusEntry

gx2Lm1000sStatusEntry 1.3.6.1.4.1.1166.6.1.2.31.4.3
This list contains Status parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Lm1000sStatusEntry  

gx2Lm1000sFactoryTable 1.3.6.1.4.1.1166.6.1.2.31.5
This table contains gx2Lm1000s specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Lm1000sFactoryEntry

gx2Lm1000sFactoryEntry 1.3.6.1.4.1.1166.6.1.2.31.5.4
This list contains Factory parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Lm1000sFactoryEntry  

gx2Lm1000sAnalogTableIndex 1.3.6.1.4.1.1166.6.1.2.31.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

lm1000slabelOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.2
The value of this object provides the label of the Offset Monitor Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.3
The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter. The unit of measure for this parameter is dB
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.4
The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.5
The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.6
The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.7
The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.8
The value of this object provides the Current value of the Offset Monitor Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.9
The value of this object provides the state of the Offset Monitor Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.10
The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.11
The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateOffsetNomMonitor 1.3.6.1.4.1.1166.6.1.2.31.2.1.12
The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

lm1000slabelLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.13
The value of this object provides the label of the Laser Optical Power Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.14
The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter. The unit of measure for this parameter is dBm
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.15
The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.16
The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.17
The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.18
The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.19
The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.20
The value of this object provides the state of the Laser Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.21
The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.22
The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateLaserPower 1.3.6.1.4.1.1166.6.1.2.31.2.1.23
The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

lm1000slabelLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.24
The value of this object provides the label of the Laser Temperature Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.25
The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter. The unit of measure for this parameter is degrees C
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.26
The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.27
The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.28
The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.29
The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.30
The value of this object provides the Current value of the Laser Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.31
The value of this object provides the state of the Laser Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.32
The value of this object provides the minimum value the Laser Temperature Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.33
The value of this object provides the maximum value the Laser Temperature Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateLaserTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.34
The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

lm1000slabelLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.35
The value of this object provides the label of the Laser Bias Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.36
The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter. The unit of measure for this parameter is mA
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.37
The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.38
The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.39
The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.40
The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.41
The value of this object provides the Current value of the Laser Bias Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.42
The value of this object provides the state of the Laser Bias Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.43
The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.44
The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateLaserCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.45
The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

lm1000slabelTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.46
The value of this object provides the label of the TEC Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.47
The value of this object provides the Unit of Measure of the TEC Current Analog parameter. The unit of measure for this parameter is mA
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.48
The value of this object provides the Major High alarm value of the TEC Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.49
The value of this object provides the Major Low alarm value of the TEC Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.50
The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.51
The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.52
The value of this object provides the Current value of the TEC Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.53
The value of this object provides the state of the TEC Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.54
The value of this object provides the minimum value the TEC Current Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.55
The value of this object provides the maximum value the TEC Current Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateTecCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.56
The value of this object provides the curent alarm state of the TEC Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

lm1000slabelModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.57
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.58
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. The unit of measure for this parameter is degrees C
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.59
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.60
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.61
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.62
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.63
The value of this object provides the Current value of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.64
The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.65
The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.66
The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateModTemp 1.3.6.1.4.1.1166.6.1.2.31.2.1.67
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

lm1000slabelFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.68
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000suomFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.69
The value of this object provides the Unit of Measure of the Fan Current Analog parameter. The unit of measure for this parameter is mA
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000smajorHighFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.70
The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smajorLowFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.71
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorHighFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.72
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000sminorLowFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.73
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Float  

lm1000scurrentValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.74
The value of this object provides the Current value of the Fan Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000sstateFlagFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.75
The value of this object provides the state of the Fan Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000sminValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.76
The value of this object provides the minimum value the Fan Current Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000smaxValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.77
The value of this object provides the maximum value the Fan Current Analog parameter can achive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

lm1000salarmStateFanCurrent 1.3.6.1.4.1.1166.6.1.2.31.2.1.78
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

gx2Lm1000sDigitalTableIndex 1.3.6.1.4.1.1166.6.1.2.31.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

lm1000slabelRfInput 1.3.6.1.4.1.1166.6.1.2.31.3.2.2
The value of this object provides the label of the RF Input Control Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000senumRfInput 1.3.6.1.4.1.1166.6.1.2.31.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueRfInput 1.3.6.1.4.1.1166.6.1.2.31.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lm1000sstateflagRfInput 1.3.6.1.4.1.1166.6.1.2.31.3.2.5
The value of this object provides the state of the RF Input Control Digital parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelOptOutput 1.3.6.1.4.1.1166.6.1.2.31.3.2.6
The value of this object provides the label of the Optical Output Control Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000senumOptOutput 1.3.6.1.4.1.1166.6.1.2.31.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueOptOutput 1.3.6.1.4.1.1166.6.1.2.31.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lm1000sstateflagOptOutput 1.3.6.1.4.1.1166.6.1.2.31.3.2.9
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelAttnSetting 1.3.6.1.4.1.1166.6.1.2.31.3.2.10
The value of this object provides the label of the Attenuation Setting Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000senumAttnSetting 1.3.6.1.4.1.1166.6.1.2.31.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueAttnSetting 1.3.6.1.4.1.1166.6.1.2.31.3.2.12
The value of this object is the current value of the parameter. Each step indicates a .5dB change in attenuation Its range is 0 to 15 dB
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dB00-0(1), db00-5(2), db01-0(3), db01-5(4), db02-0(5), db02-5(6), db03-0(7), db03-5(8), db04-0(9), db04-5(10), db05-0(11), db05-5(12), db06-0(13), db06-5(14), db07-0(15), db07-5(16), db08-0(17), db08-5(18), db09-0(19), db09-5(20), db10-0(21), db10-5(22), db11-0(23), db11-5(24), db12-0(25), db12-5(26), db13-0(27), db13-5(28), db14-0(29), db14-5(30), db15-0(31)  

lm1000sstateflagAttnSetting 1.3.6.1.4.1.1166.6.1.2.31.3.2.13
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelFactoryDefault 1.3.6.1.4.1.1166.6.1.2.31.3.2.14
The value of this object provides the label of the Factory Default Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000senumFactoryDefault 1.3.6.1.4.1.1166.6.1.2.31.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueFactoryDefault 1.3.6.1.4.1.1166.6.1.2.31.3.2.16
The value of this object is the current value of the parameter. Return value is meaningless
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lm1000sstateflagFactoryDefault 1.3.6.1.4.1.1166.6.1.2.31.3.2.17
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

gx2Lm1000sStatusTableIndex 1.3.6.1.4.1.1166.6.1.2.31.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

lm1000slabelBoot 1.3.6.1.4.1.1166.6.1.2.31.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueBoot 1.3.6.1.4.1.1166.6.1.2.31.4.3.3
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

lm1000sstateflagBoot 1.3.6.1.4.1.1166.6.1.2.31.4.3.4
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelFlash 1.3.6.1.4.1.1166.6.1.2.31.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueFlash 1.3.6.1.4.1.1166.6.1.2.31.4.3.6
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

lm1000sstateflagFlash 1.3.6.1.4.1.1166.6.1.2.31.4.3.7
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.31.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.31.4.3.9
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

lm1000sstateflagFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.31.4.3.10
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelLaserDataCRC 1.3.6.1.4.1.1166.6.1.2.31.4.3.11
The value of this object provides the label of the Laser Data CRC Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueLaserDataCRC 1.3.6.1.4.1.1166.6.1.2.31.4.3.12
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

lm1000sstateflagLaserDataCRC 1.3.6.1.4.1.1166.6.1.2.31.4.3.13
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelAlarmDataCrc 1.3.6.1.4.1.1166.6.1.2.31.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueAlarmDataCrc 1.3.6.1.4.1.1166.6.1.2.31.4.3.15
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

lm1000sstateflagAlarmDataCrc 1.3.6.1.4.1.1166.6.1.2.31.4.3.16
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

lm1000slabelRFInputStatus 1.3.6.1.4.1.1166.6.1.2.31.4.3.17
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000svalueRFInputStatus 1.3.6.1.4.1.1166.6.1.2.31.4.3.18
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

lm1000sstateflagRFInputStatus 1.3.6.1.4.1.1166.6.1.2.31.4.3.19
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

gx2Lm1000sFactoryTableIndex 1.3.6.1.4.1.1166.6.1.2.31.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

lm1000sbootControlByte 1.3.6.1.4.1.1166.6.1.2.31.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sbootStatusByte 1.3.6.1.4.1.1166.6.1.2.31.5.4.3
This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sbank1CRC 1.3.6.1.4.1.1166.6.1.2.31.5.4.4
This object provides the CRC code of bank 0. The display formate for the data is Hex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sbank2CRC 1.3.6.1.4.1.1166.6.1.2.31.5.4.5
This object provides the CRC code of bank 1.The display formate for the data is Hex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sprgEEPROMByte 1.3.6.1.4.1.1166.6.1.2.31.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sfactoryCRC 1.3.6.1.4.1.1166.6.1.2.31.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000scalculateCRC 1.3.6.1.4.1.1166.6.1.2.31.5.4.8
This object indicates which of the Enums will have the CRC calculated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER factory(1), na(2), alarm(3)  

lm1000shourMeter 1.3.6.1.4.1.1166.6.1.2.31.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sflashPrgCntA 1.3.6.1.4.1.1166.6.1.2.31.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sflashPrgCntB 1.3.6.1.4.1.1166.6.1.2.31.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lm1000sflashBankARev 1.3.6.1.4.1.1166.6.1.2.31.5.4.12
This object provides the revision of flash bank 0. The rev is 2 characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

lm1000sflashBankBRev 1.3.6.1.4.1.1166.6.1.2.31.5.4.13
This object provides the revision of flash bank 1. The rev is 2 characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

trapLM1000SConfigChangeInteger 1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE    

trapLM1000SConfigChangeDisplayString 2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE    

trapLM1000SfanCurrentAlarm 3
This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SModuleTempAlarm 4
This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SomiOffsetAlarm 5
This trap is issued when the OMI Offset goes out of range.
TRAP-TYPE    

trapLM1000StecCurrentAlarm 6
This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SLaserCurrentAlarm 7
This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SLaserTempAlarm 8
This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SLaserPowerAlarm 9
This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SFlashAlarm 10
This trap is issued when the Laser Modules detects an error during Flash memory operations.
TRAP-TYPE    

trapLM1000SBankBootAlarm 11
This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
TRAP-TYPE    

trapLM1000SAlarmDataCRCAlarm 12
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE    

trapLM1000SFactoryDataCRCAlarm 13
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE    

trapLM1000SCalDataCRCAlarm 14
This trap is issued when the Cal Data CRC is incorrect.
TRAP-TYPE    

trapLM1000SResetFacDefault 15
This trap is issued when the LM1000S resets to factory defaults
TRAP-TYPE    

trapLM1000SUserRFOffAlarm 16
This trap is issued when the the User RF is turned off.
TRAP-TYPE    

trapLM1000SUserOpticalOffAlarm 17
This trap is issued when the User Optical Power is turned off.
TRAP-TYPE    

trapLM1000SUserSBSOffAlarm 18
This trap is issued when the User SBS is turned off.
TRAP-TYPE    

trapLM1000SRFInputAlarm 19
This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapLM1000SRFOverloadAlarm 20
This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE