OMNI-gx2GS1000-MIB

File: OMNI-gx2GS1000-MIB.mib (103591 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	NLS-BBNIDENT-MIB	GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	sysUpTime	DisplayString
TRAP-TYPE	gi	motproxies
gx2Gs1000	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2gs1000AnalogEntry
SEQUENCE
	gx2gs1000AnalogTableIndex	INTEGER
	gs1000labelOffsetNomMonitor	DisplayString	Size(0..80)
	gs1000uomOffsetNomMonitor	DisplayString	Size(0..80)
	gs1000majorHighOffsetNomMonitor	Float
	gs1000majorLowOffsetNomMonitor	Float
	gs1000minorHighOffsetNomMonitor	Float
	gs1000minorLowOffsetNomMonitor	Float
	gs1000currentValueOffsetNomMonitor	Float
	gs1000stateFlagOffsetNomMonitor	INTEGER
	gs1000minValueOffsetNomMonitor	Float
	gs1000maxValueOffsetNomMonitor	Float
	gs1000alarmStateOffsetNomMonitor	INTEGER
	gs1000labelOffsetNomCnt	DisplayString	Size(0..80)
	gs1000uomOffsetNomCnt	DisplayString	Size(0..80)
	gs1000majorHighOffsetNomCnt	Float
	gs1000majorLowOffsetNomCnt	Float
	gs1000minorHighOffsetNomCnt	Float
	gs1000minorLowOffsetNomCnt	Float
	gs1000currentValueOffsetNomCnt	Float
	gs1000stateFlagOffsetNomCnt	INTEGER
	gs1000minValueOffsetNomCnt	Float
	gs1000maxValueOffsetNomCnt	Float
	gs1000alarmStateOffsetNomCnt	INTEGER
	gs1000labelOptPower	DisplayString	Size(0..80)
	gs1000uomOptPower	DisplayString	Size(0..80)
	gs1000majorHighOptPower	Float
	gs1000majorLowOptPower	Float
	gs1000minorHighOptPower	Float
	gs1000minorLowOptPower	Float
	gs1000currentValueOptPower	Float
	gs1000stateFlagOptPower	INTEGER
	gs1000minValueOptPower	Float
	gs1000maxValueOptPower	Float
	gs1000alarmStateOptPower	INTEGER
	gs1000labelLaserTemp	DisplayString	Size(0..80)
	gs1000uomLaserTemp	DisplayString	Size(0..80)
	gs1000majorHighLaserTemp	Float
	gs1000majorLowLaserTemp	Float
	gs1000minorHighLaserTemp	Float
	gs1000minorLowLaserTemp	Float
	gs1000currentValueLaserTemp	Float
	gs1000stateFlagLaserTemp	INTEGER
	gs1000minValueLaserTemp	Float
	gs1000maxValueLaserTemp	Float
	gs1000alarmStateLaserTemp	INTEGER
	gs1000labelLaserBias	DisplayString	Size(0..80)
	gs1000uomLaserBias	DisplayString	Size(0..80)
	gs1000majorHighLaserBias	Float
	gs1000majorLowLaserBias	Float
	gs1000minorHighLaserBias	Float
	gs1000minorLowLaserBias	Float
	gs1000currentValueLaserBias	Float
	gs1000stateFlagLaserBias	INTEGER
	gs1000minValueLaserBias	Float
	gs1000maxValueLaserBias	Float
	gs1000alarmStateLaserBias	INTEGER
	gs1000labelTecCurrent	DisplayString	Size(0..80)
	gs1000uomTecCurrent	DisplayString	Size(0..80)
	gs1000majorHighTecCurrent	Float
	gs1000majorLowTecCurrent	Float
	gs1000minorHighTecCurrent	Float
	gs1000minorLowTecCurrent	Float
	gs1000currentValueTecCurrent	Float
	gs1000stateFlagTecCurrent	INTEGER
	gs1000minValueTecCurrent	Float
	gs1000maxValueTecCurrent	Float
	gs1000alarmStateTecCurrent	INTEGER
	gs1000labelModuleTemp	DisplayString	Size(0..80)
	gs1000uomModuleTemp	DisplayString	Size(0..80)
	gs1000majorHighModuleTemp	Float
	gs1000majorLowModuleTemp	Float
	gs1000minorHighModuleTemp	Float
	gs1000minorLowModuleTemp	Float
	gs1000currentValueModuleTemp	Float
	gs1000stateFlagModuleTemp	INTEGER
	gs1000minValueModuleTemp	Float
	gs1000maxValueModuleTemp	Float
	gs1000alarmStateModuleTemp	INTEGER
	gs1000labelFan1Speed	DisplayString	Size(0..80)
	gs1000uomFan1Speed	DisplayString	Size(0..80)
	gs1000majorHighFan1Speed	Float
	gs1000majorLowFan1Speed	Float
	gs1000minorHighFan1Speed	Float
	gs1000minorLowFan1Speed	Float
	gs1000currentValueFan1Speed	Float
	gs1000stateFlagFan1Speed	INTEGER
	gs1000minValueFan1Speed	Float
	gs1000maxValueFan1Speed	Float
	gs1000alarmStateFan1Speed	INTEGER
	gs1000labelFan2Speed	DisplayString	Size(0..80)
	gs1000uomFan2Speed	DisplayString	Size(0..80)
	gs1000majorHighFan2Speed	Float
	gs1000majorLowFan2Speed	Float
	gs1000minorHighFan2Speed	Float
	gs1000minorLowFan2Speed	Float
	gs1000currentValueFan2Speed	Float
	gs1000stateFlagFan2Speed	INTEGER
	gs1000minValueFan2Speed	Float
	gs1000maxValueFan2Speed	Float
	gs1000alarmStateFan2Speed	INTEGER
	gs1000label12Volt	DisplayString	Size(0..80)
	gs1000uom12Volt	DisplayString	Size(0..80)
	gs1000majorHigh12Volt	Float
	gs1000majorLow12Volt	Float
	gs1000minorHigh12Volt	Float
	gs1000minorLow12Volt	Float
	gs1000currentValue12Volt	Float
	gs1000stateFlag12Volt	INTEGER
	gs1000minValue12Volt	Float
	gs1000maxValue12Volt	Float
	gs1000alarmState12Volt	INTEGER

Gx2gs1000DigitalEntry
SEQUENCE
	gx2gs1000DigitalTableIndex	INTEGER
	gs1000labelRfInput	DisplayString	Size(0..80)
	gs1000enumRfInput	DisplayString	Size(0..80)
	gs1000valueRfInput	INTEGER
	gs1000stateflagRfInput	INTEGER
	gs1000labelOptOutput	DisplayString	Size(0..80)
	gs1000enumOptOutput	DisplayString	Size(0..80)
	gs1000valueOptOutput	INTEGER
	gs1000stateflagOptOutput	INTEGER
	gs1000labelLaserMode	DisplayString	Size(0..80)
	gs1000enumLaserMode	DisplayString	Size(0..80)
	gs1000valueLaserMode	INTEGER
	gs1000stateflagLaserMode	INTEGER
	gs1000labelAttenSetting	DisplayString	Size(0..80)
	gs1000enumAttenSetting	DisplayString	Size(0..80)
	gs1000valueAttenSetting	INTEGER
	gs1000stateflagAttenSetting	INTEGER
	gs1000labelLaserSecMode	DisplayString	Size(0..80)
	gs1000enumLaserSecMode	DisplayString	Size(0..80)
	gs1000valueLaserSecMode	INTEGER
	gs1000stateflagLaserSecMode	INTEGER
	gs1000labelVideoOffset	DisplayString	Size(0..80)
	gs1000enumVideoOffset	DisplayString	Size(0..80)
	gs1000valueVideoOffset	INTEGER
	gs1000stateflagVideoOffset	INTEGER
	gs1000labelFactoryDefault	DisplayString	Size(0..80)
	gs1000enumFactoryDefault	DisplayString	Size(0..80)
	gs1000valueFactoryDefault	INTEGER
	gs1000stateflagFactoryDefault	INTEGER

Gx2gs1000StatusEntry
SEQUENCE
	gx2gs1000StatusTableIndex	INTEGER
	gs1000labelBoot	DisplayString	Size(0..80)
	gs1000valueBoot	INTEGER
	gs1000stateflagBoot	INTEGER
	gs1000labelFlash	DisplayString	Size(0..80)
	gs1000valueFlash	INTEGER
	gs1000stateflagFlash	INTEGER
	gs1000labelFactoryDataCRC	DisplayString	Size(0..80)
	gs1000valueFactoryDataCRC	INTEGER
	gs1000stateflagFactoryDataCRC	INTEGER
	gs1000labelLaserDataCRC	DisplayString	Size(0..80)
	gs1000valueLaserDataCRC	INTEGER
	gs1000stateflagLaserDataCRC	INTEGER
	gs1000labelAlarmDataCrc	DisplayString	Size(0..80)
	gs1000valueAlarmDataCrc	INTEGER
	gs1000stateflagAlarmDataCrc	INTEGER
	gs1000labelRFInputStatus	DisplayString	Size(0..80)
	gs1000valueRFInputStatus	INTEGER
	gs1000stateflagRFInputStatus	INTEGER

Gx2gs1000FactoryEntry
SEQUENCE
	gx2gs1000FactoryTableIndex	INTEGER
	gs1000bootControlByteValue	INTEGER
	gs1000bootStatusByteValue	INTEGER
	gs1000bank1CRCValue	INTEGER
	gs1000bank2CRCValue	INTEGER
	gs1000prgEEPROMByteValue	INTEGER
	gs1000factoryCRCValue	INTEGER
	gs1000calculateCRCValue	INTEGER
	gs1000hourMeterValue	INTEGER
	gs1000flashPrgCntAValue	INTEGER
	gs1000flashPrgCntBValue	INTEGER
	gs1000flashBankARevValue	DisplayString	Size(0..80)
	gs1000flashBankBRevValue	DisplayString	Size(0..80)

Defined Values

gx2gs1000Descriptor		1.3.6.1.4.1.1166.6.1.2.36.1
OBJECT IDENTIFIER

gx2gs1000AnalogTable		1.3.6.1.4.1.1166.6.1.2.36.2
This table contains gx2Gs1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2gs1000AnalogEntry

gx2gs1000AnalogEntry		1.3.6.1.4.1.1166.6.1.2.36.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2gs1000AnalogEntry

gx2gs1000DigitalTable		1.3.6.1.4.1.1166.6.1.2.36.3
This table contains gx2Gs1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2gs1000DigitalEntry

gx2gs1000DigitalEntry		1.3.6.1.4.1.1166.6.1.2.36.3.2
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2gs1000DigitalEntry

gx2gs1000StatusTable		1.3.6.1.4.1.1166.6.1.2.36.4
This table contains gx2Gs1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2gs1000StatusEntry

gx2gs1000StatusEntry		1.3.6.1.4.1.1166.6.1.2.36.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2gs1000StatusEntry

gx2gs1000FactoryTable		1.3.6.1.4.1.1166.6.1.2.36.5
This table contains gx2Gs1000 specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2gs1000FactoryEntry

gx2gs1000FactoryEntry		1.3.6.1.4.1.1166.6.1.2.36.5.4
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2gs1000FactoryEntry

gx2gs1000AnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.36.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

gs1000labelOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.2
The value of this object provides the label of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.3
The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.4
The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.5
The value of this object provides the Major Low alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.6
The value of this object provides the Minor High alarm value of the Offset Monitor Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.7
The value of this object provides the Minor Low alarm value of the Offset Monitor Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.8
The value of this object provides the Current value of the Offset Monitor Analog parameter. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.9
The value of this object provides the state of the Offset Monitor Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.10
The value of this object provides the minimum value the Offset Monitor Analog parameter can achive. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.11
The value of this object provides the maximum value the Offset Monitor Analog parameter can achive. This value is a float and is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateOffsetNomMonitor		1.3.6.1.4.1.1166.6.1.2.36.2.1.12
The value of this object provides the curent alarm state of the Offset Monitor Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.13
The value of this object provides the label of the Offset Control Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.14
The value of this object provides the label of the Offset Control Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.15
The value of this object provides the Major High alarm value of the Offset Control Analog parameter. This value is a float and is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.16
The value of this object provides the Major Low alarm value of the Offset Control Analog parameter. This value is a float and is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.17
The value of this object provides the Minor High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.18
The value of this object provides the Minor Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.19
The value of this object provides the Current value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

gs1000stateFlagOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.20
The value of this object provides the state of the Offset Control Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.21
The value of this object provides the minimum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.22
The value of this object provides the maximum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateOffsetNomCnt		1.3.6.1.4.1.1166.6.1.2.36.2.1.23
The value of this object provides the curent alarm state of the Offset Control Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.24
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.25
The value of this object provides the Unit of Measure of the Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.26
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.27
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.28
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.29
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.30
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.31
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.32
The value of this object provides the minimum value the Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.33
The value of this object provides the maximum value the Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateOptPower		1.3.6.1.4.1.1166.6.1.2.36.2.1.34
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.35
The value of this object provides the label of the Laser Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.36
The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.37
The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.38
The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.39
The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.40
The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.41
The value of this object provides the Current value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.42
The value of this object provides the state of the Laser Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.43
The value of this object provides the minimum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.44
The value of this object provides the maximum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateLaserTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.45
The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.46
The value of this object provides the label of the Laser Bias Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.47
The value of this object provides the Unit of Measure of the Laser Bias Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.48
The value of this object provides the Major High alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.49
The value of this object provides the Major Low alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.50
The value of this object provides the Minor High alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.51
The value of this object provides the Minor Low alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.52
The value of this object provides the Current value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.53
The value of this object provides the state of the Laser Bias Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.54
The value of this object provides the minimum value the Laser Bias Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.55
The value of this object provides the maximum value the Laser Bias Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateLaserBias		1.3.6.1.4.1.1166.6.1.2.36.2.1.56
The value of this object provides the curent alarm state of the Laser Bias Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.57
The value of this object provides the label of the TEC Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.58
The value of this object provides the Unit of Measure of the TEC Current Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.59
The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.60
The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.61
The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.62
The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.63
The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.64
The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.65
The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.66
The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateTecCurrent		1.3.6.1.4.1.1166.6.1.2.36.2.1.67
The value of this object provides the curent alarm state of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.68
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.69
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.70
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.71
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.72
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.73
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.74
The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.75
The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.76
The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.77
The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateModuleTemp		1.3.6.1.4.1.1166.6.1.2.36.2.1.78
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.79
The value of this object provides the label of the Fan 1 Speed Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.80
The value of this object provides the Unit of Measure of the Fan 1 Speed Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.81
The value of this object provides the Major High alarm value of the Fan 1 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.82
The value of this object provides the Major Low alarm value of the Fan 1 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.83
The value of this object provides the Minor High alarm value of the Fan 1 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.84
The value of this object provides the Minor Low alarm value of the Fan 1 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.85
The value of this object provides the Current value of the Fan 1 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.86
The value of this object provides the state of the Fan 1 Speed Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.87
The value of this object provides the minimum value the Fan 1 Speed Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.88
The value of this object provides the maximum value the Fan 1 Speed Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateFan1Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.89
The value of this object provides the curent alarm state of the Fan 1 Speed Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000labelFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.90
The value of this object provides the label of the Fan 2 Speed Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uomFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.91
The value of this object provides the Unit of Measure of the Fan 2 Speed Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHighFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.92
The value of this object provides the Major High alarm value of the Fan 2 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLowFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.93
The value of this object provides the Major Low alarm value of the Fan 2 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHighFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.94
The value of this object provides the Minor High alarm value of the Fan 2 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. In this version of the Firmware and MIB this Parameter is not used and is optional. All reads will return the Unused Parameter (10,000,000)
Status: optional	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLowFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.95
The value of this object provides the Minor Low alarm value of the Fan 2 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValueFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.96
The value of this object provides the Current value of the Fan 2 Speed Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlagFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.97
The value of this object provides the state of the Fan 2 Speed Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValueFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.98
The value of this object provides the minimum value the Fan 2 Speed Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValueFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.99
The value of this object provides the maximum value the Fan 2 Speed Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmStateFan2Speed		1.3.6.1.4.1.1166.6.1.2.36.2.1.100
The value of this object provides the curent alarm state of the Fan 2 Speed Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gs1000label12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.101
The value of this object provides the label of the 12v Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000uom12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.102
The value of this object provides the Unit of Measure of the 12v Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000majorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.103
The value of this object provides the Major High alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000majorLow12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.104
The value of this object provides the Major Low alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.105
The value of this object provides the Minor High alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000minorLow12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.106
The value of this object provides the Minor Low alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000currentValue12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.107
The value of this object provides the Current value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000stateFlag12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.108
The value of this object provides the state of the 12v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000minValue12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.109
The value of this object provides the minimum value the 12v Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000maxValue12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.110
The value of this object provides the maximum value the 12v Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

gs1000alarmState12Volt		1.3.6.1.4.1.1166.6.1.2.36.2.1.111
The value of this object provides the curent alarm state of the 12v Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2gs1000DigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.36.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

gs1000labelRfInput		1.3.6.1.4.1.1166.6.1.2.36.3.2.2
The value of this object provides the label of the RF Input Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumRfInput		1.3.6.1.4.1.1166.6.1.2.36.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueRfInput		1.3.6.1.4.1.1166.6.1.2.36.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

gs1000stateflagRfInput		1.3.6.1.4.1.1166.6.1.2.36.3.2.5
The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelOptOutput		1.3.6.1.4.1.1166.6.1.2.36.3.2.6
The value of this object provides the label of the Optical Output Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumOptOutput		1.3.6.1.4.1.1166.6.1.2.36.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueOptOutput		1.3.6.1.4.1.1166.6.1.2.36.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

gs1000stateflagOptOutput		1.3.6.1.4.1.1166.6.1.2.36.3.2.9
The value of this object provides the gs1000state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelLaserMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.10
The value of this object provides the label of the Laser Mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumLaserMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueLaserMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.12
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	preset(1), set(2), setEquate(3), manual(4), manualEquate(5)

gs1000stateflagLaserMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelAttenSetting		1.3.6.1.4.1.1166.6.1.2.36.3.2.14
The value of this object provides the label of the Attenuation Setting Ditital Parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumAttenSetting		1.3.6.1.4.1.1166.6.1.2.36.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueAttenSetting		1.3.6.1.4.1.1166.6.1.2.36.3.2.16
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	attn0pt0(1), attn0pt5(2), attn1pt0(3), attn1pt5(4), attn2pt0(5), attn2pt5(6), attn3pt0(7), attn3pt5(8), attn4pt0(9), attn4pt5(10), attn5pt0(11), attn5pt5(12), attn6pt0(13), attn6pt5(14), attn7pt0(15), attn7pt5(16), attn8pt0(17), attn8pt5(18), attn9pt0(19), attn9pt5(20), attn10pt0(21), attn10pt5(22), attn11pt0(23), attn11pt5(24), attn12pt0(25)

gs1000stateflagAttenSetting		1.3.6.1.4.1.1166.6.1.2.36.3.2.17
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelLaserSecMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.18
The value of this object provides the label of the Laser Secondary Mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumLaserSecMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.19
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueLaserSecMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.20
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	cw(1), video(2)

gs1000stateflagLaserSecMode		1.3.6.1.4.1.1166.6.1.2.36.3.2.21
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelVideoOffset		1.3.6.1.4.1.1166.6.1.2.36.3.2.22
The value of this object provides the label of the Video Offset Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumVideoOffset		1.3.6.1.4.1.1166.6.1.2.36.3.2.23
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueVideoOffset		1.3.6.1.4.1.1166.6.1.2.36.3.2.24
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	minus1dB(1), minus2dB(2), minus3dB(3), minus4dB(4), minus5dB(5)

gs1000stateflagVideoOffset		1.3.6.1.4.1.1166.6.1.2.36.3.2.25
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelFactoryDefault		1.3.6.1.4.1.1166.6.1.2.36.3.2.26
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000enumFactoryDefault		1.3.6.1.4.1.1166.6.1.2.36.3.2.27
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueFactoryDefault		1.3.6.1.4.1.1166.6.1.2.36.3.2.28
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

gs1000stateflagFactoryDefault		1.3.6.1.4.1.1166.6.1.2.36.3.2.29
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2gs1000StatusTableIndex		1.3.6.1.4.1.1166.6.1.2.36.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

gs1000labelBoot		1.3.6.1.4.1.1166.6.1.2.36.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueBoot		1.3.6.1.4.1.1166.6.1.2.36.4.3.3
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

gs1000stateflagBoot		1.3.6.1.4.1.1166.6.1.2.36.4.3.4
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelFlash		1.3.6.1.4.1.1166.6.1.2.36.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueFlash		1.3.6.1.4.1.1166.6.1.2.36.4.3.6
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

gs1000stateflagFlash		1.3.6.1.4.1.1166.6.1.2.36.4.3.7
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.36.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.36.4.3.9
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

gs1000stateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.36.4.3.10
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.36.4.3.11
The value of this object provides the label of the Laser Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.36.4.3.12
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

gs1000stateflagLaserDataCRC		1.3.6.1.4.1.1166.6.1.2.36.4.3.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.36.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.36.4.3.15
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

gs1000stateflagAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.36.4.3.16
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gs1000labelRFInputStatus		1.3.6.1.4.1.1166.6.1.2.36.4.3.17
The value of this object provides the label of the RF Input Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000valueRFInputStatus		1.3.6.1.4.1.1166.6.1.2.36.4.3.18
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

gs1000stateflagRFInputStatus		1.3.6.1.4.1.1166.6.1.2.36.4.3.19
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2gs1000FactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.36.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

gs1000bootControlByteValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000bootStatusByteValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.3
This object indicates the status of the last boot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000bank1CRCValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000bank2CRCValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000prgEEPROMByteValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000factoryCRCValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000calculateCRCValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.8
This object indicates which of the Emnums will have the CRC calculated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), laserData(2), alarm(3)

gs1000hourMeterValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000flashPrgCntAValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000flashPrgCntBValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

gs1000flashBankARevValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.12
This object provides the revision of flash bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

gs1000flashBankBRevValue		1.3.6.1.4.1.1166.6.1.2.36.5.4.13
This object provides the revision of flash bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

trapGS1000ConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapGS1000ConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapGS1000RFInputAlarm		3
This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000RFOverloadAlarm		4
This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000RFOffsetAlarm		5
This trap is issued when the Laser Modules RF Offset parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000OpticalPowerAlarm		6
This trap is issued when the Laser Modules Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000LaserBiasAlarm		7
This trap is issued when the Laser Bias parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000LaserTempAlarm		8
This trap is issued when the Laser Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000TECCurrentAlarm		9
This trap is issued when the Laser Modules TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000Fan1SpeedAlarm		10
This trap is issued when the Laser Modules Fan 1 Speed parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000Fan2SpeedAlarm		11
This trap is issued when the Laser Modules Fan 2 Speed parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS100012vAlarm		12
This trap is issued when the Laser Modules 12 Volt parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapGS1000ModuleTempAlarm		13
This trap is issued when the Laser Module Temperature goes out of range.
TRAP-TYPE

trapGS1000FlashAlarm		14
This trap is issued when the Laser Modules detects an error during Flash memory operations.
TRAP-TYPE

trapGS1000LaserBiasCntLoopAlarm		15
This trap is issued when the Laser Modules detects an error in its Laser Bias control loop operation.
TRAP-TYPE

trapGS1000BankBootAlarm		16
This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapGS1000LaserBiasCntLoopInitAlarm		17
This trap is issued when the Laser Bias Control loop init fails.
TRAP-TYPE

trapGS1000RFParamInitAlarm		18
This trap is issued when the RF parameter Init fails.
TRAP-TYPE

trapGS1000TECParamInitAlarm		19
This trap is issued when the TEC Parameter Init fails.
TRAP-TYPE

trapGS1000AttnTableInitAlarm		20
This trap is issued when the Attenuator Table Init fails.
TRAP-TYPE

trapGS1000PowerMeterTableInitAlarm		21
This trap is issued when the Power Meter Table Init fails.
TRAP-TYPE

trapGS1000LaserDataCRCAlarm		22
This trap is issued when the Laser Data CRC is incorrect.
TRAP-TYPE

trapGS1000AlarmDataCRCAlarm		23
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapGS1000FactoryDataCRCAlarm		24
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapGS1000UserRFOffAlarm		25
This trap is issued when the the User RF is turned off.
TRAP-TYPE

trapGS1000UserOpticalOffAlarm		26
This trap is issued when the User Optical Power is turned off.
TRAP-TYPE

trapGS1000ResetFactoryDefaultAlarm		27
This trap is issued when the Factory Default Reset occurs.
TRAP-TYPE