OLD-CISCO-SYSTEM-MIB

File: OLD-CISCO-SYSTEM-MIB.mib (8544 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
CISCO-SMI

Imported symbols

IpAddress OBJECT-TYPE DisplayString
local

Defined Values

lsystem 2.1
OBJECT IDENTIFIER    

romId 2.1.1
This variable contains a printable octet string which contains the System Bootstrap description and version identification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

whyReload 2.1.2
This variable contains a printable octet string which contains the reason why the system was last restarted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hostName 2.1.3
This variable represents the name of the host in printable ascii characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

domainName 2.1.4
This variable is the domain portion of the domain name of the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

authAddr 2.1.5
This variable contains the last SNMP authorization failure IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootHost 2.1.6
Contains the IP address of the host that supplied the currently running software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

netConfigAddr 2.1.48
Holds the address of the host that supplied the network-confg file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

netConfigName 2.1.49
Holds the name of the network configuration file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

netConfigSet 2.1.50
Cause the loading of a new network-confg file using TFTP.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString  

hostConfigAddr 2.1.51
Contains the address of the host that provided the host-config file.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

hostConfigName 2.1.52
Contains the name of the last configured host-confg file.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

hostConfigSet 2.1.53
Cause the loading of a new host-confg file using TFTP.
Status: obsolete Access: write-only
OBJECT-TYPE    
  DisplayString  

writeMem 2.1.54
Write configuration into non-volatile memory / erase config memory if 0.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

writeNet 2.1.55
Write configuration to host using TFTP.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString  

ciscoContactInfo 2.1.61
cisco's name and address
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

netConfigProto 2.1.70
Holds the protocol that supplied the network-confg file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hostConfigProto 2.1.71
Holds the protocol that supplied the host- confg file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysConfigAddr 2.1.72
Holds the address of the host that supplied the system boot image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sysConfigName 2.1.73
Holds the name of the system boot image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysConfigProto 2.1.74
Holds the protocol or media that supplied the system boot image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tftp(1), rom(2), flash(3)  

sysClearARP 2.1.75
Perform a clearing of the entire ARP cache and invalidation of route caches.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

sysClearInt 2.1.76
Clear interface given IfIndex as value.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER