Novell-LANalyzer-TR-MIB

File: Novell-LANalyzer-TR-MIB.mib (90233 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC1271-MIB
RFC-1212 RFC-1215

Imported symbols

enterprises Counter TimeTicks
DisplayString OwnerString EntryStatus
OBJECT-TYPE TRAP-TYPE

Defined Types

MacAddress  
OCTET STRING Size(6)    

TokenRingStatsEntry  
SEQUENCE    
  tokenRingStatsIndex INTEGER 1..65535
  tokenRingStatsDataSource OBJECT IDENTIFIER
  tokenRingStatsDropEvents Counter
  tokenRingStatsDataOctets Counter
  tokenRingStatsDataPkts Counter
  tokenRingStatsBroadcastDataPkts Counter
  tokenRingStatsMulticastDataPkts Counter
  tokenRingStatsMACOctets Counter
  tokenRingStatsMACPkts Counter
  tokenRingStatsRingPurges Counter
  tokenRingStatsMonitorContentions Counter
  tokenRingStatsBeacons Counter
  tokenRingStatsLostMonitors Counter
  tokenRingStatsDuplicateMonitors Counter
  tokenRingStatsDuplicateAddresses Counter
  tokenRingStatsRingPollFailures Counter
  tokenRingStatsLineErrors Counter
  tokenRingStatsInternalErrors Counter
  tokenRingStatsBurstErrors Counter
  tokenRingStatsACErrors Counter
  tokenRingStatsAbortDelimiters Counter
  tokenRingStatsLostFrameErrors Counter
  tokenRingStatsReceiveCongestions Counter
  tokenRingStatsFrameCopiedErrors Counter
  tokenRingStatsFrequencyErrors Counter
  tokenRingStatsTokenErrors Counter
  tokenRingStatsDataPktsUndersizePkts Counter
  tokenRingStatsDataPkts18to63Octets Counter
  tokenRingStatsDataPkts64to127Octets Counter
  tokenRingStatsDataPkts128to255Octets Counter
  tokenRingStatsDataPkts256to511Octets Counter
  tokenRingStatsDataPkts512to1023Octets Counter
  tokenRingStatsDataPkts1024to2047Octets Counter
  tokenRingStatsDataPkts2048to4608Octets Counter
  tokenRingStatsDataPkts4609to18000Octets Counter
  tokenRingStatsDataPktsMoreThan18000Octets Counter
  tokenRingStatsOwner OwnerString
  tokenRingStatsStatus EntryStatus

TokenRingHistoryEntry  
SEQUENCE    
  tokenRingHistoryIndex INTEGER 1..65535
  tokenRingHistoryStartIndex INTEGER
  tokenRingHistoryIntervalStart TimeTicks
  tokenRingHistoryDropEvents Counter
  tokenRingHistoryDataOctets Counter
  tokenRingHistoryDataPkts Counter
  tokenRingHistoryBroadcastDataPkts Counter
  tokenRingHistoryMulticastDataPkts Counter
  tokenRingHistoryMACOctets Counter
  tokenRingHistoryMACPkts Counter
  tokenRingHistoryRingPurges Counter
  tokenRingHistoryMonitorContentions Counter
  tokenRingHistoryBeacons Counter
  tokenRingHistoryLostMonitors Counter
  tokenRingHistoryDuplicateMonitors Counter
  tokenRingHistoryDuplicateAddresses Counter
  tokenRingHistoryRingPollFailures Counter
  tokenRingHistoryLineErrors Counter
  tokenRingHistoryInternalErrors Counter
  tokenRingHistoryBurstErrors Counter
  tokenRingHistoryACErrors Counter
  tokenRingHistoryAbortDelimiters Counter
  tokenRingHistoryLostFrameErrors Counter
  tokenRingHistoryReceiveCongestions Counter
  tokenRingHistoryFrameCopiedErrors Counter
  tokenRingHistoryFrequencyErrors Counter
  tokenRingHistoryTokenErrors Counter
  tokenRingHistoryUtilization INTEGER 0..10000

TokenRingControlEntry  
SEQUENCE    
  tokenRingControlIndex INTEGER 1..65535
  tokenRingControlIfIndex INTEGER
  tokenRingControlCommandStatus INTEGER
  tokenRingControlCommandType INTEGER
  tokenRingControlCommandTargetAddress MacAddress
  tokenRingControlBeaconEventIndex INTEGER 0..65535
  tokenRingControlConfigEventIndex INTEGER 0..65535
  tokenRingControlOwner OwnerString
  tokenRingControlStatus EntryStatus

TokenRingNetworkEntry  
SEQUENCE    
  tokenRingNetworkIfIndex INTEGER
  tokenRingNetworkLastResetTime TimeTicks
  tokenRingNetworkRingNumber INTEGER 0..4095
  tokenRingNetworkMediaSpeed INTEGER
  tokenRingNetworkBridges INTEGER
  tokenRingNetworkActiveStations INTEGER
  tokenRingNetworkInactiveStations INTEGER
  tokenRingNetworkLastEnterMACAddress MacAddress
  tokenRingNetworkLastExitMACAddress MacAddress
  tokenRingNetworkState INTEGER
  tokenRingNetworkStateCause INTEGER
  tokenRingNetworkStateSenderMACAddress MacAddress
  tokenRingNetworkStateUpstreamNeighborMACAddress MacAddress
  tokenRingNetworkHostOrderChanges Counter
  tokenRingNetworkActiveMonitorChanges Counter

TokenRingHostEntry  
SEQUENCE    
  tokenRingHostIfIndex INTEGER
  tokenRingHostIndex INTEGER 1..65535
  tokenRingHostStatus INTEGER
  tokenRingHostLastEnterTime TimeTicks
  tokenRingHostLastExitTime TimeTicks
  tokenRingHostMACAddress MacAddress
  tokenRingHostPhysicalDropNumber OCTET STRING
  tokenRingHostSoftErrorReportTimerValue INTEGER 0..65535
  tokenRingHostGroupAddresses INTEGER
  tokenRingHostFunctionalAddresses INTEGER
  tokenRingHostAuthorizedFunctionClass INTEGER 0..65535
  tokenRingHostAuthorizedAccessPriority INTEGER 0..7
  tokenRingHostAdapterSoftwareLevel OCTET STRING
  tokenRingHostAdapterStatusVector OCTET STRING
  tokenRingHostProductID OCTET STRING
  tokenRingHostLostMonitors Counter
  tokenRingHostDuplicateMonitors Counter
  tokenRingHostDuplicateAddresses Counter
  tokenRingHostRingPollFailures Counter
  tokenRingHostInLineErrors Counter
  tokenRingHostInternalErrors Counter
  tokenRingHostInBurstErrors Counter
  tokenRingHostACErrors Counter
  tokenRingHostAbortDelimiters Counter
  tokenRingHostLostFrameErrors Counter
  tokenRingHostReceiveCongestions Counter
  tokenRingHostFrameCopiedErrors Counter
  tokenRingHostFrequencyErrors Counter
  tokenRingHostTokenErrors Counter
  tokenRingHostOutLineErrors Counter
  tokenRingHostOutBurstErrors Counter
  tokenRingHostInBeacons Counter
  tokenRingHostOutBeacons Counter
  tokenRingHostInsertions Counter

TokenRingOrderEntry  
SEQUENCE    
  tokenRingOrderIfIndex INTEGER
  tokenRingOrderIndex INTEGER 1..65535
  tokenRingOrderStatus INTEGER
  tokenRingOrderLastEnterTime TimeTicks
  tokenRingOrderLastExitTime TimeTicks
  tokenRingOrderMACAddress OCTET STRING
  tokenRingOrderPhysicalDropNumber OCTET STRING
  tokenRingOrderSoftErrorReportTimerValue INTEGER 0..65535
  tokenRingOrderGroupAddresses INTEGER
  tokenRingOrderFunctionalAddresses INTEGER
  tokenRingOrderAuthorizedFunctionClass INTEGER 0..65535
  tokenRingOrderAuthorizedAccessPriority INTEGER 0..7
  tokenRingOrderAdapterSoftwareLevel OCTET STRING
  tokenRingOrderAdapterStatusVector OCTET STRING
  tokenRingOrderProductID OCTET STRING
  tokenRingOrderLostMonitors Counter
  tokenRingOrderDuplicateMonitors Counter
  tokenRingOrderDuplicateAddresses Counter
  tokenRingOrderRingPollFailures Counter
  tokenRingOrderInLineErrors Counter
  tokenRingOrderInternalErrors Counter
  tokenRingOrderInBurstErrors Counter
  tokenRingOrderACErrors Counter
  tokenRingOrderAbortDelimiters Counter
  tokenRingOrderLostFrameErrors Counter
  tokenRingOrderReceiveCongestions Counter
  tokenRingOrderFrameCopiedErrors Counter
  tokenRingOrderFrequencyErrors Counter
  tokenRingOrderTokenErrors Counter
  tokenRingOrderOutLineErrors Counter
  tokenRingOrderOutBurstErrors Counter
  tokenRingOrderInBeacons Counter
  tokenRingOrderOutBeacons Counter
  tokenRingOrderInsertions Counter

Defined Values

novell 1.3.6.1.4.1.23
OBJECT IDENTIFIER    

productType 1.3.6.1.4.1.23.1
OBJECT IDENTIFIER    

mibDoc 1.3.6.1.4.1.23.2
OBJECT IDENTIFIER    

ringrmon-mib 1.3.6.1.4.1.23.2.15
OBJECT IDENTIFIER    

tokenRingStatistics 1.3.6.1.4.1.23.2.15.1
OBJECT IDENTIFIER    

tokenRingHistory 1.3.6.1.4.1.23.2.15.2
OBJECT IDENTIFIER    

tokenRing 1.3.6.1.4.1.23.2.15.3
OBJECT IDENTIFIER    

tokenRingStatsTable 1.3.6.1.4.1.23.2.15.1.1
A list of token ring statistics entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TokenRingStatsEntry

tokenRingStatsEntry 1.3.6.1.4.1.23.2.15.1.1.1
A collection of statistics kept for a particular token ring interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TokenRingStatsEntry  

tokenRingStatsIndex 1.3.6.1.4.1.23.2.15.1.1.1.1
The value of this object uniquely identifies this tokenRingStat entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

tokenRingStatsDataSource 1.3.6.1.4.1.23.2.15.1.1.1.2
This object contains the identifier for the source of the data that this tokenRingStats entry is set up to analyze. The identifier is defined to contain the name of the instance that this entry receives data from. This object may not be modified unless the associated tokenRingStatsEntry object is equal to invalid(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OBJECT IDENTIFIER  

tokenRingStatsDropEvents 1.3.6.1.4.1.23.2.15.1.1.1.3
The total number of events in which packets are dropped by the probe due to lack of resources. Note that this is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataOctets 1.3.6.1.4.1.23.2.15.1.1.1.4
The total number of good NON-MAC octets received on the network, excluding framing bits but including FCS octets. In contrast to etherStatsOctets, octets from bad packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts 1.3.6.1.4.1.23.2.15.1.1.1.5
The total number of good NON-MAC packets received on the network. In contrast to etherStatsPkts, bad packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsBroadcastDataPkts 1.3.6.1.4.1.23.2.15.1.1.1.6
The total number of good NON-MAC packets received that were direct to the broadcast address. Note that bad broadcast packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsMulticastDataPkts 1.3.6.1.4.1.23.2.15.1.1.1.7
The total number of good NON-MAC packets received that were directed to a local or global multicast or functional address. Note that bad mutlicast packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsMACOctets 1.3.6.1.4.1.23.2.15.1.1.1.8
The total number of good MAC octets received on the network, excluding framing bits but including FCS octets. Same as tokenRingStatsDataOctets, octets from bad MAC packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsMACPkts 1.3.6.1.4.1.23.2.15.1.1.1.9
The total number of good MAC packets received on the network, including unicast, multicast and broadcast MAC packets. Same as tokenRingStatsDataPkts, bad MAC packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsRingPurges 1.3.6.1.4.1.23.2.15.1.1.1.10
The total number of times that the ring enters the ring purge state from normal ring state. Ring purge occurs when the active monitor station detects a type 2 soft errors. The ring purge state that comes from the monitor contention or beacon state is not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsMonitorContentions 1.3.6.1.4.1.23.2.15.1.1.1.11
The total number of times that the ring enters the monitor contention state from normal ring state or ring purge state. Monitor contention occurs when a type 3 soft error occurs in the network. The monitor contention state that comes from the beacon state is not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsBeacons 1.3.6.1.4.1.23.2.15.1.1.1.12
The total number of times that the ring enters the beaconing state. Beaconing occurs when a type 4 soft error or hard error occurs in the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsLostMonitors 1.3.6.1.4.1.23.2.15.1.1.1.13
The total number of monitor errors reported by the Report Monitor Error MAC frame. It occurs when the standby monitor fails to detect a good token in 2.6 seconds, or no ring poll process is executed in 15 seconds. The standby monitor assumes that the active monitor is not present or not functioning. Lost monitor is a type 3 error and will cause the detect station to initiate the monitor contention process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDuplicateMonitors 1.3.6.1.4.1.23.2.15.1.1.1.14
The total number of duplicate monitor errors reported by the Report Monitor Error MAC frame. When an active monitor detects a ring purge frame or an active monitor present frame from other station, it realizes another active monitor in the ring. This station reports duplicate monitor to the Ring Error Monitor and becomes a standby monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDuplicateAddresses 1.3.6.1.4.1.23.2.15.1.1.1.15
The total number of duplicate address errors reported by the Report Monitor Error MAC frame. It is generated by the station when it detects other stations using its own address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsRingPollFailures 1.3.6.1.4.1.23.2.15.1.1.1.16
The total number of Report Ring Poll Failure MAC frames received. It is generated when the active monitor cannot see a ring poll cycle completed within a time limit. The MAC address of the last station in the incomplete ring poll cycle is saved in the tokenRingNetwork table for reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsLineErrors 1.3.6.1.4.1.23.2.15.1.1.1.17
The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsInternalErrors 1.3.6.1.4.1.23.2.15.1.1.1.18
The total number of adapter internal errors reported to the Ring Error Monitor. Internal error indicates that a station recognizes a recoverable internal error. Internal error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsBurstErrors 1.3.6.1.4.1.23.2.15.1.1.1.19
The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit times. Burst error is isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsACErrors 1.3.6.1.4.1.23.2.15.1.1.1.20
The total number of AC errors reported to the Ring Error Monitor. AC error indicates that a station cannot interpret the address recognition bit or the frame copied bit. AC error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsAbortDelimiters 1.3.6.1.4.1.23.2.15.1.1.1.21
The total number of abort delimiters reported to the Ring Error Monitor. Abort delimiter indicates that a station aborts a transmission. Abort delimiter is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsLostFrameErrors 1.3.6.1.4.1.23.2.15.1.1.1.22
The total number of lost frame errors reported to the Ring Error Monitor. Lost frame error indicates that the end delimiter of a frame is lost in the network. Lost frame error is non-isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsReceiveCongestions 1.3.6.1.4.1.23.2.15.1.1.1.23
The total number of receive congestion errors reported to the Ring Error Monitor. Receive congestion error indicates that a station recognizes a frame addressed to its specific address, but has no available buffer space. Receive congestion error is non-isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsFrameCopiedErrors 1.3.6.1.4.1.23.2.15.1.1.1.24
The total number of frame copied errors reported to the Ring Error Monitor. Frame copied error indicates that a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1. It implies either a line hit or duplicate address. Frame copied error is non-isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsFrequencyErrors 1.3.6.1.4.1.23.2.15.1.1.1.25
The total number of frequency errors reported to the Ring Error Monitor. Frequency error indicates that a station detects that the frequency of the incoming signal differs by more than the standard specified margin. Frequency error is non-isolated error. It is a type 3 error and will cause the detect station initiating monitor contention process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsTokenErrors 1.3.6.1.4.1.23.2.15.1.1.1.26
The total number of token errors reported to the Ring Error Monitor. Token error indicates that the Active Monitor station recognizes an error condition that needs a token transmitted. Token error is non-isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPktsUndersizePkts 1.3.6.1.4.1.23.2.15.1.1.1.27
The total number of packets received that were between 0 and 17 octets in length inclusive, excluding framing bits but including FCS octets. Packets in this category are too short. It is the counterpart of runt packets in Ethernet RMON.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts18to63Octets 1.3.6.1.4.1.23.2.15.1.1.1.28
The total number of data packets received that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets. It is the counterpart of etherStatsPkts64Octets in Ethernet RMON. In contrast to Ethernet, error packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts64to127Octets 1.3.6.1.4.1.23.2.15.1.1.1.29
The total number of data packets received that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets. It is the counterpart of etherStatsPkts65to127Octets in Ethernet RMON. In contrast to Ethernet, error packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts128to255Octets 1.3.6.1.4.1.23.2.15.1.1.1.30
The total number of data packets received that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets. It is the counterpart of etherStatsPkts128to255Octets in Ethernet RMON. In contrast to Ethernet, error packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts256to511Octets 1.3.6.1.4.1.23.2.15.1.1.1.31
The total number of data packets received that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets. It is the counterpart of etherStatsPkts256to511Octets in Ethernet RMON. In contrast to Ethernet, error packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts512to1023Octets 1.3.6.1.4.1.23.2.15.1.1.1.32
The total number of data packets received that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets. It is the counterpart of etherStatsPkts512to1023Octets in Ethernet RMON. In contrast to Ethernet, error packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts1024to2047Octets 1.3.6.1.4.1.23.2.15.1.1.1.33
The total number of data packets received that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets. It is the superset of etherStatsPkts1024to1518Octets in Ethernet RMON. In contrast to Ethernet, error packets are not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts2048to4608Octets 1.3.6.1.4.1.23.2.15.1.1.1.34
The total number of data packets (excluding error packets) received that were between 2048 and 4608 octets in length inclusive, excluding framing bits but including FCS octets. Note that error packets in this length range is not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPkts4609to18000Octets 1.3.6.1.4.1.23.2.15.1.1.1.35
The total number of data packets (excluding error packets) received that were between 4609 and 18000 octets in length inclusive, excluding framing bits but including FCS octets. Note that error packets in this length range is not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsDataPktsMoreThan18000Octets 1.3.6.1.4.1.23.2.15.1.1.1.36
The total number of data packets (excluding error packets) received that were more than 18000 in length, excluding framing bits but including FCS octets. Note that error packets in this length range is not counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingStatsOwner 1.3.6.1.4.1.23.2.15.1.1.1.37
An administratively assigned name for the management station that configured this entry and is therefore using the resources assigned to it. This object contains a NVT octet string up to 127 characters. In some cases the agent itself will configure an entry. In this case, the agent is responsible for the resources and this object shall be set to a string starting with 'monitor'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OwnerString  

tokenRingStatsStatus 1.3.6.1.4.1.23.2.15.1.1.1.38
The status of this tokenRingStats entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EntryStatus  

tokenRingHistoryTable 1.3.6.1.4.1.23.2.15.2.1
A list of token ring statistics entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TokenRingHistoryEntry

tokenRingHistoryEntry 1.3.6.1.4.1.23.2.15.2.1.1
A collection of history statistics kept for a particular token ring interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TokenRingHistoryEntry  

tokenRingHistoryIndex 1.3.6.1.4.1.23.2.15.2.1.1.1
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

tokenRingHistoryStartIndex 1.3.6.1.4.1.23.2.15.2.1.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingHistoryIntervalStart 1.3.6.1.4.1.23.2.15.2.1.1.3
The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

tokenRingHistoryDropEvents 1.3.6.1.4.1.23.2.15.2.1.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryDataOctets 1.3.6.1.4.1.23.2.15.2.1.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryDataPkts 1.3.6.1.4.1.23.2.15.2.1.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryBroadcastDataPkts 1.3.6.1.4.1.23.2.15.2.1.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryMulticastDataPkts 1.3.6.1.4.1.23.2.15.2.1.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryMACOctets 1.3.6.1.4.1.23.2.15.2.1.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryMACPkts 1.3.6.1.4.1.23.2.15.2.1.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryRingPurges 1.3.6.1.4.1.23.2.15.2.1.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryMonitorContentions 1.3.6.1.4.1.23.2.15.2.1.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryBeacons 1.3.6.1.4.1.23.2.15.2.1.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryLostMonitors 1.3.6.1.4.1.23.2.15.2.1.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryDuplicateMonitors 1.3.6.1.4.1.23.2.15.2.1.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryDuplicateAddresses 1.3.6.1.4.1.23.2.15.2.1.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryRingPollFailures 1.3.6.1.4.1.23.2.15.2.1.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryLineErrors 1.3.6.1.4.1.23.2.15.2.1.1.18
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryInternalErrors 1.3.6.1.4.1.23.2.15.2.1.1.19
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryBurstErrors 1.3.6.1.4.1.23.2.15.2.1.1.20
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryACErrors 1.3.6.1.4.1.23.2.15.2.1.1.21
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryAbortDelimiters 1.3.6.1.4.1.23.2.15.2.1.1.22
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryLostFrameErrors 1.3.6.1.4.1.23.2.15.2.1.1.23
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryReceiveCongestions 1.3.6.1.4.1.23.2.15.2.1.1.24
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryFrameCopiedErrors 1.3.6.1.4.1.23.2.15.2.1.1.25
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryFrequencyErrors 1.3.6.1.4.1.23.2.15.2.1.1.26
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryTokenErrors 1.3.6.1.4.1.23.2.15.2.1.1.27
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHistoryUtilization 1.3.6.1.4.1.23.2.15.2.1.1.28
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

tokenRingControlTable 1.3.6.1.4.1.23.2.15.3.1
A list of token ring configuration control entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TokenRingControlEntry

tokenRingControlEntry 1.3.6.1.4.1.23.2.15.3.1.1
A list of parameters that sets up a command buffer and two event pointers for the manager who has created this instance.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TokenRingControlEntry  

tokenRingControlIndex 1.3.6.1.4.1.23.2.15.3.1.1.1
An index that uniquely identifies an entry in the tokenRingControl table. Each entry contains a command buffer for the management station to issue a command and two event indexes for specifying the actions to be done when the ring starts beaconing and a host has entered or exited the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

tokenRingControlIfIndex 1.3.6.1.4.1.23.2.15.3.1.1.2
This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

tokenRingControlCommandStatus 1.3.6.1.4.1.23.2.15.3.1.1.3
The object contains the result of the most recent test, or the value none(1) if no tests have been requested since last reset. After the manager issues a new command, the agent will turn the status to inProgress(3) and start executing. Meanwhile, the manager polls this object until a completion status is returned. Then it proceeds to read the result.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), missingData(6), aborted(7), failed(8), sendPending(9)  

tokenRingControlCommandType 1.3.6.1.4.1.23.2.15.3.1.1.4
The object specifies the operation to act upon the target station requested by the manager. The agent only accepts unicast address from the management station. If non-unicast address is specified, the notSupported(4) value will be written to the tokenRingControlCommandStatus object. Note that the agent does not check the specified address with the host table. In other words, the management station can specify a non-existing MAC address in the command. The removeStation(1) command requests the agent to send the Remove Ring Station MAC frame to the target station that deinserts the target station from the ring. The testStation(2) command requests the agent to send the Transmit Forward MAC frame to the tagart station. The agent then monitors the response frames from the target station. If the expected response frame is not detected, the agent will write the failed(7) value to the tokenRingControlCommandStatus object. Otherwise, the success(2) value will be written to. The requestStationAddress(3) command requests the agent to send the Request Station Address MAC frame to the target station. This command is to update the address assignments of the target station in the host table. The requestStationState(4) command requests the agent to send the Request Station State MAC frame to the target station. This command is to update the state information of the target station in the host table. The requestStationAttachment(5) command requests the agent to send the Request Station Attachment MAC frame to the target station. This command is to update the configuration information about the host attachment unit of the target station in the host table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nop(1), removeStation(2), testStation(3), requestStationAddress(4), requestStationState(5), requestStationAttachment(6)  

tokenRingControlCommandTargetAddress 1.3.6.1.4.1.23.2.15.3.1.1.5
This object contains the MAC address of the target station requested by the manager. The value must be an unicast address. Multicast, functional or broadcast address is not allowed. Note that the proxy agent does not check whether the address is in the host table or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

tokenRingControlBeaconEventIndex 1.3.6.1.4.1.23.2.15.3.1.1.6
The value of this object identifies the event that is configured to be generated when the ring to which this interface board is connected starts beaconing. The beacon event is generated only when the ring enters the beacon state. The beacon event will not be generated again unless the ring has exited the beacon state. The agent reports the failure domain and the beacon level in the first detected beacon frame to the management station. The information may not be the most accurate because the failure domain takes time to converge and the beacon level can be elevated. The station can poll the tokenRingNetwork table to read the current status of the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

tokenRingControlConfigEventIndex 1.3.6.1.4.1.23.2.15.3.1.1.7
The value of this object identifies the event that is configured to be generated when a station has entered or exited the ring that this interface board is connected to. This control table does not establish any flow control mechanism with the management station. If a group of stations enter or exit the ring at the same time and the link between the management station and the agent is slow, some events may be lost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

tokenRingControlOwner 1.3.6.1.4.1.23.2.15.3.1.1.8
An administratively assigned name for the management station that configured this entry and is therefore using the resources assigned to it. In some cases the agent itself will configure an entry. In this case, the agent is responsible for the resources and this object shall be set to a string starting with 'monitor'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OwnerString  

tokenRingControlStatus 1.3.6.1.4.1.23.2.15.3.1.1.9
The status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EntryStatus  

tokenRingNetworkTable 1.3.6.1.4.1.23.2.15.3.2
The ring level information about the token ring networks in this machine.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TokenRingNetworkEntry

tokenRingNetworkEntry 1.3.6.1.4.1.23.2.15.3.2.1
The current state of this token ring network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TokenRingNetworkEntry  

tokenRingNetworkIfIndex 1.3.6.1.4.1.23.2.15.3.2.1.1
This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingNetworkLastResetTime 1.3.6.1.4.1.23.2.15.3.2.1.2
This object contains the sysUpTime when the data base of this group is created or last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks 1..65535  

tokenRingNetworkRingNumber 1.3.6.1.4.1.23.2.15.3.2.1.3
The ring number of which this interface board connects to. If the ring number is not known, it should be set to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

tokenRingNetworkMediaSpeed 1.3.6.1.4.1.23.2.15.3.2.1.4
The media speed of the ring. The value is either 4 or 16. Other values are not allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fourMbps(4), sixteenMbps(16)  

tokenRingNetworkBridges 1.3.6.1.4.1.23.2.15.3.2.1.5
The number of bridges in the host table. The bridge is referred to the device which supports the bridge functional address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingNetworkActiveStations 1.3.6.1.4.1.23.2.15.3.2.1.6
The number of active stations in the host table. The active stations are participating in the ring poll process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingNetworkInactiveStations 1.3.6.1.4.1.23.2.15.3.2.1.7
The number of inactive stations in the host table. The inactive stations are not inserted in the ring or are not participating in the ring poll process. Note that the station became inactive before the tokenRingNetworkLastResetTime cannot be detected by the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingNetworkLastEnterMACAddress 1.3.6.1.4.1.23.2.15.3.2.1.8
The MAC address of the token ring station that has entered this ring most recently.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

tokenRingNetworkLastExitMACAddress 1.3.6.1.4.1.23.2.15.3.2.1.9
The MAC address of the token ring station that has left this ring most recently.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

tokenRingNetworkState 1.3.6.1.4.1.23.2.15.3.2.1.10
The state of the ring of which this entry is a part.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normalOperation(1), ringPurgeState(2), claimTokenState(3), beaconState(4)  

tokenRingNetworkStateCause 1.3.6.1.4.1.23.2.15.3.2.1.11
The cause of this state transition. It is required to give the best estimation of the cause. When this interface just enters the ring, this object is initialized to initiatState(2). If no hint is available, then it sets the cause to notClear(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notClear(1), initialState(2), normalRing(3), recovering(4), hardError(5), beaconSetRecoveryMode(6), beaconRingSignalLoss(7), beaconBitStreaming(8), beaconFrameStreaming(9), type1SoftError(10), type2SoftError(11), type3SoftError(12), type4SoftError(13), burst5Error(14), lostFrameError(15), corruptedToken(16), lostToken(17), circulatingFrame(18), multipleMonitor(19), lostMonitor(20), frequencyError(21)  

tokenRingNetworkStateSenderMACAddress 1.3.6.1.4.1.23.2.15.3.2.1.12
The MAC address of the station which initiates the state transition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

tokenRingNetworkStateUpstreamNeighborMACAddress 1.3.6.1.4.1.23.2.15.3.2.1.13
The MAC address in the upstream neighbor address subvector of the MAC protocol frame. Some MAC protocol frames, such as ring purge frame, do not contain that subvector, then the MAC address contained in this object is irrelevant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

tokenRingNetworkHostOrderChanges 1.3.6.1.4.1.23.2.15.3.2.1.14
The count of the index in the host table that has changed since this table is created. The host table contains active and inactive stations which are arranged in sequential order. This counter roughly estimates the number of times that the hosts have changed their port connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingNetworkActiveMonitorChanges 1.3.6.1.4.1.23.2.15.3.2.1.15
The number of times that the active monitor changes station since this table is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostTable 1.3.6.1.4.1.23.2.15.3.3
A list of token ring host table entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TokenRingHostEntry

tokenRingHostEntry 1.3.6.1.4.1.23.2.15.3.3.1
The information of the host that has been discovered on this interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TokenRingHostEntry  

tokenRingHostIfIndex 1.3.6.1.4.1.23.2.15.3.3.1.1
This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingHostIndex 1.3.6.1.4.1.23.2.15.3.3.1.2
An index that defines the relative order of the hosts in this ring starting from the Active Monitor station. The active monitor station contains the value of 1. The rest of the stations are arranged in sequential order relative to the active monitor station. When a station becomes inactive, its entry is not meant to be deleted. The value in the tokenRingHostStatus is changed to inactive. The delete algorithm is implementation specific. If a station becomes active and its entry is already in the host table, then the value of the tokenRingHostStatus object is changed to active. In addition, if the relative order of the host entries has changed, it shall increment the tokenRingNetworkHostOrderChange counter in the tokenRingNetwork table by one. On the other hand, if a station becomes active and its entry is not in the host table, then a new entry must be created. The new entry is inserted right after its upstream neighbor station. The tokenRingNetworkHostOrderChange counter in the tokenRingNetwork table shall not be increment. If the active monitor changes station and the relative position of the host entries is unchanged, then the tokenRingNetworkHostOrderChange object in the tokenRingNetwork table shall not be increment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

tokenRingHostStatus 1.3.6.1.4.1.23.2.15.3.3.1.3
The host table contains active and inactive stations. An active station is currently participating in the ring poll process. An inactive station is vice versa. The inactive station can be a previous active station which has exited the ring, or a station which is in the ring but does not participate in the ring poll process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), activeMonitor(3)  

tokenRingHostLastEnterTime 1.3.6.1.4.1.23.2.15.3.3.1.4
The sysUpTime that the station has entered the ring most recently or when the host entry is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

tokenRingHostLastExitTime 1.3.6.1.4.1.23.2.15.3.3.1.5
The sysUpTime that the station has exited the ring most recently. When this object is created, it shall reset its value to 0. It indicates that the station has never exited since creation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

tokenRingHostMACAddress 1.3.6.1.4.1.23.2.15.3.3.1.6
The station's MAC address to which this entry is belonged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

tokenRingHostPhysicalDropNumber 1.3.6.1.4.1.23.2.15.3.3.1.7
The station's physical drop number of which this entry is belonged. If the value of this object is not assigned, then it is defaulted to four zeros.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingHostSoftErrorReportTimerValue 1.3.6.1.4.1.23.2.15.3.3.1.8
The time interval of the host station that the Report Soft Error MAC frame is generated. The default value is two seconds. The value is in units of millisecond.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

tokenRingHostGroupAddresses 1.3.6.1.4.1.23.2.15.3.3.1.9
The group address of this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingHostFunctionalAddresses 1.3.6.1.4.1.23.2.15.3.3.1.10
The functional address of the station. The functional address is assigned in the bit map fashion. The first two bytes are always 'C0-00' in hex. and the first bit of the third byte is always zero. The following 31 bits are defined as follows: 00-00-00-01 : Active Monitor. 00-00-00-02 : Ring Parameter Server. 00-00-00-04 : 00-00-00-08 : Ring Error Monitor. 00-00-00-10 : Configuration Report Server. 00-00-00-20 : 00-00-00-40 : 00-00-00-80 : NetBIOS. 00-00-01-00 : Bridge. 00-00-02-00 : 00-00-04-00 : 00-00-08-00 : 00-00-10-00 : 00-00-20-00 : IBM LAN Network Manager. 00-00-40-00 : 00-00-80-00 : The bit range between 00-01-00-00 and 40-00-00-00 are not administrated by IEEE. They are defined by users. Below lists a couple of popular assignments: 00-80-00-00 : Novell NetWare. 40-00-00-00 : Apple TokenTalk Broadcast.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingHostAuthorizedFunctionClass 1.3.6.1.4.1.23.2.15.3.3.1.11
Source classes for which the host is enabled to transmit. Valid range is '0000 0000 0000 0000'b to '1111 1111 1111 1111'b. Each bit 0 to 15 corresponds to function class '0000'b to '1111'b. Bit value '1'b means function class is enabled. Defined function classes are the following: '00'H : Ring Station. '01'H : LLC Manager. '04'H : Configuration Report Server. '05'H : Ring Parameter Server. '06'H : Ring Error Monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

tokenRingHostAuthorizedAccessPriority 1.3.6.1.4.1.23.2.15.3.3.1.12
Maximum allowed token priority with which the attached product is allowed to transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

tokenRingHostAdapterSoftwareLevel 1.3.6.1.4.1.23.2.15.3.3.1.13
The adapter software level of this station. The interpretation of the value in this object is vendor specific.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingHostAdapterStatusVector 1.3.6.1.4.1.23.2.15.3.3.1.14
The adapter status vector of this station. The interpretation of the value in this object is vendor specific.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingHostProductID 1.3.6.1.4.1.23.2.15.3.3.1.15
The product identification of this station. The content is defined by vendor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingHostLostMonitors 1.3.6.1.4.1.23.2.15.3.3.1.16
The total number of monitor errors reported by the Report Monitor Error MAC frame. It occurs when the standby monitor fails to detect a good token in 2.6 seconds, or no ring poll process is executed in 15 seconds. The standby monitor assumes that the active monitor is not present or not functioning. Lost monitor is a type 3 error and will cause the detect station to initiate the monitor contention process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostDuplicateMonitors 1.3.6.1.4.1.23.2.15.3.3.1.17
The total number of duplicate monitor errors reported by the Report Monitor Error MAC frame. When an active monitor detects a ring purge frame or an active monitor present frame from other station, it realizes another active monitor in the ring. This station reports duplicate monitor to the Ring Error Monitor and becomes a standby monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostDuplicateAddresses 1.3.6.1.4.1.23.2.15.3.3.1.18
The total number of duplicate address errors reported by the Report Monitor Error MAC frame. It is generated by the station when it detects other stations using its MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostRingPollFailures 1.3.6.1.4.1.23.2.15.3.3.1.19
The total number of Report Ring Poll Failure MAC frames received. It is generated when the active monitor cannot see a ring poll cycle completed within a time limit. The MAC address of the last station in the incomplete ring poll cycle is saved in the tokenRingNetwork table for reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostInLineErrors 1.3.6.1.4.1.23.2.15.3.3.1.20
The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostInternalErrors 1.3.6.1.4.1.23.2.15.3.3.1.21
The total number of adapter internal errors reported to the Ring Error Monitor. Internal error indicates that a station recognizes a recoverable internal error. Internal error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostInBurstErrors 1.3.6.1.4.1.23.2.15.3.3.1.22
The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit times. Burst error is isolated error. It is a type 2 error and will casue the active monitor purging the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostACErrors 1.3.6.1.4.1.23.2.15.3.3.1.23
The total number of AC errors reported to the Ring Error Monitor. AC error indicates that a station cannot interpret the address recognition bit or the frame copied bit. AC error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostAbortDelimiters 1.3.6.1.4.1.23.2.15.3.3.1.24
The number of abort delimiters reported to the Ring Error Monitor. Abort delimiter indicates that a station aborts a transmission. Abort delimiter is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostLostFrameErrors 1.3.6.1.4.1.23.2.15.3.3.1.25
The number of lost frame errors reported to the Ring Error Monitor. Lost frame error indicates that the end delimiter of a frame is lost in the network. Lost frame error is non-isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostReceiveCongestions 1.3.6.1.4.1.23.2.15.3.3.1.26
The number of receive congestions reported to the Ring Error Monitor. Receive congestion error indicates that a station recognizes a frame addressed to its specific address, but has no available buffer space. Receive congestion error is non-isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostFrameCopiedErrors 1.3.6.1.4.1.23.2.15.3.3.1.27
The number of frame copied errors reported to the Ring Error Monitor. Frame copied error indicates that a station recognizes a frame addressed to its specific address and detects that the A bits in Frame Status byte are set to 1. It implies either a line hit or duplicate address. Frame copied error is non-isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostFrequencyErrors 1.3.6.1.4.1.23.2.15.3.3.1.28
The number of frequency errors reported to the Ring Error Monitor. Frequency error indicates that a station detects that the frequency of the incoming signal differs by more than the standard specified margin. Frequency error is non-isolated error. It is a type 3 error and will cause the detect station initiating monitor contention process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostTokenErrors 1.3.6.1.4.1.23.2.15.3.3.1.29
The total number of token errors reported to the Ring Error Monitor. Token error indicates that the Active Monitor station recognizes an error condition that needs a token transmitted. Token error is non-isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostOutLineErrors 1.3.6.1.4.1.23.2.15.3.3.1.30
The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostOutBurstErrors 1.3.6.1.4.1.23.2.15.3.3.1.31
The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit times. Burst error is isolated error. It is a type 2 error and will casue the active monitor purging the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostInBeacons 1.3.6.1.4.1.23.2.15.3.3.1.32
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostOutBeacons 1.3.6.1.4.1.23.2.15.3.3.1.33
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingHostInsertions 1.3.6.1.4.1.23.2.15.3.3.1.34
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderTable 1.3.6.1.4.1.23.2.15.3.4
A list of token ring host table entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TokenRingOrderEntry

tokenRingOrderEntry 1.3.6.1.4.1.23.2.15.3.4.1
The information of the host that has been discovered on this interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TokenRingOrderEntry  

tokenRingOrderIfIndex 1.3.6.1.4.1.23.2.15.3.4.1.1
This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingOrderIndex 1.3.6.1.4.1.23.2.15.3.4.1.2
An index that defines the relative order of the hosts in this ring starting from the Active Monitor station. The active monitor station contains the value of 1. The rest of the stations are arranged in sequential order relative to the active monitor station. When a station becomes inactive, its entry is not meant to be deleted. The value in the tokenRingOrderStatus is changed to inactive. The delete algorithm is implementation specific. If a station becomes active and its entry is already in the host table, then the value of the tokenRingOrderStatus object is changed to active. In addition, if the relative order of the host entries has changed, it shall increment the tokenRingNetworkHostOrderChange counter in the tokenRingNetwork table by one. On the other hand, if a station becomes active and its entry is not in the host table, then a new entry must be created. The new entry is inserted right after its upstream neighbor station. The tokenRingNetworkHostOrderChange counter in the tokenRingNetwork table shall not be increment. If the active monitor changes station and the relative position of the host entries is unchanged, then the tokenRingNetworkHostOrderChange object in the tokenRingNetwork table shall not be increment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

tokenRingOrderStatus 1.3.6.1.4.1.23.2.15.3.4.1.3
The host table contains active and inactive stations. An active station is currently participating in the ring poll process. An inactive station is vice versa. The inactive station can be a previous active station which has exited the ring, or a station which is in the ring but does not participate in the ring poll process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), activeMonitor(3)  

tokenRingOrderLastEnterTime 1.3.6.1.4.1.23.2.15.3.4.1.4
The sysUpTime that the station has entered the ring most recently or when the host entry is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

tokenRingOrderLastExitTime 1.3.6.1.4.1.23.2.15.3.4.1.5
The sysUpTime that the station has exited the ring most recently. When this object is created, it shall reset its value to 0. It indicates that the station has never exited since creation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

tokenRingOrderMACAddress 1.3.6.1.4.1.23.2.15.3.4.1.6
The station's MAC address to which this entry is belonged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

tokenRingOrderPhysicalDropNumber 1.3.6.1.4.1.23.2.15.3.4.1.7
The station's physical drop number of which this entry is belonged. If the value of this object is not assigned, then it is defaulted to four zeros.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingOrderSoftErrorReportTimerValue 1.3.6.1.4.1.23.2.15.3.4.1.8
The time interval of the host station that the Report Soft Error MAC frame is generated. The default value is two seconds. The value is in units of millisecond.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

tokenRingOrderGroupAddresses 1.3.6.1.4.1.23.2.15.3.4.1.9
The group address of this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingOrderFunctionalAddresses 1.3.6.1.4.1.23.2.15.3.4.1.10
The functional address of the station. The functional address is assigned in the bit map fashion. The first two bytes are always 'C0-00' in hex. and the first bit of the third byte is always zero. The following 31 bits are defined as follows: 00-00-00-01 : Active Monitor. 00-00-00-02 : Ring Parameter Server. 00-00-00-04 : 00-00-00-08 : Ring Error Monitor. 00-00-00-10 : Configuration Report Server. 00-00-00-20 : 00-00-00-40 : 00-00-00-80 : NetBIOS. 00-00-01-00 : Bridge. 00-00-02-00 : 00-00-04-00 : 00-00-08-00 : 00-00-10-00 : 00-00-20-00 : IBM LAN Network Manager. 00-00-40-00 : 00-00-80-00 : The bit range between 00-01-00-00 and 40-00-00-00 are not administrated by IEEE. They are defined by users. Below lists a couple of popular assignments: 00-80-00-00 : Novell NetWare. 40-00-00-00 : Apple TokenTalk Broadcast.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tokenRingOrderAuthorizedFunctionClass 1.3.6.1.4.1.23.2.15.3.4.1.11
Source classes for which the host is enabled to transmit. Valid range is '0000 0000 0000 0000'b to '1111 1111 1111 1111'b. Each bit 0 to 15 corresponds to function class '0000'b to '1111'b. Bit value '1'b means function class is enabled. Defined function classes are the following: '00'H : Ring Station. '01'H : LLC Manager. '04'H : Configuration Report Server. '05'H : Ring Parameter Server. '06'H : Ring Error Monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

tokenRingOrderAuthorizedAccessPriority 1.3.6.1.4.1.23.2.15.3.4.1.12
Maximum allowed token priority with which the attached product is allowed to transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

tokenRingOrderAdapterSoftwareLevel 1.3.6.1.4.1.23.2.15.3.4.1.13
The adapter software level of this station. The interpretation of the value in this object is vendor specific.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingOrderAdapterStatusVector 1.3.6.1.4.1.23.2.15.3.4.1.14
The adapter status vector of this station. The interpretation of the value in this object is vendor specific.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingOrderProductID 1.3.6.1.4.1.23.2.15.3.4.1.15
The product identification of this station. The content is defined by vendor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tokenRingOrderLostMonitors 1.3.6.1.4.1.23.2.15.3.4.1.16
The total number of monitor errors reported by the Report Monitor Error MAC frame. It occurs when the standby monitor fails to detect a good token in 2.6 seconds, or no ring poll process is executed in 15 seconds. The standby monitor assumes that the active monitor is not present or not functioning. Lost monitor is a type 3 error and will cause the detect station to initiate the monitor contention process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderDuplicateMonitors 1.3.6.1.4.1.23.2.15.3.4.1.17
The total number of duplicate monitor errors reported by the Report Monitor Error MAC frame. When an active monitor detects a ring purge frame or an active monitor present frame from other station, it realizes another active monitor in the ring. This station reports duplicate monitor to the Ring Error Monitor and becomes a standby monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderDuplicateAddresses 1.3.6.1.4.1.23.2.15.3.4.1.18
The total number of duplicate address errors reported by the Report Monitor Error MAC frame. It is generated by the station when it detects other stations using its MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderRingPollFailures 1.3.6.1.4.1.23.2.15.3.4.1.19
The total number of Report Ring Poll Failure MAC frames received. It is generated when the active monitor cannot see a ring poll cycle completed within a time limit. The MAC address of the last station in the incomplete ring poll cycle is saved in the tokenRingNetwork table for reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderInLineErrors 1.3.6.1.4.1.23.2.15.3.4.1.20
The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderInternalErrors 1.3.6.1.4.1.23.2.15.3.4.1.21
The total number of adapter internal errors reported to the Ring Error Monitor. Internal error indicates that a station recognizes a recoverable internal error. Internal error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderInBurstErrors 1.3.6.1.4.1.23.2.15.3.4.1.22
The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit times. Burst error is isolated error. It is a type 2 error and will casue the active monitor purging the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderACErrors 1.3.6.1.4.1.23.2.15.3.4.1.23
The total number of AC errors reported to the Ring Error Monitor. AC error indicates that a station cannot interpret the address recognition bit or the frame copied bit. AC error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderAbortDelimiters 1.3.6.1.4.1.23.2.15.3.4.1.24
The number of abort delimiters reported to the Ring Error Monitor. Abort delimiter indicates that a station aborts a transmission. Abort delimiter is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderLostFrameErrors 1.3.6.1.4.1.23.2.15.3.4.1.25
The number of lost frame errors reported to the Ring Error Monitor. Lost frame error indicates that the end delimiter of a frame is lost in the network. Lost frame error is non-isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderReceiveCongestions 1.3.6.1.4.1.23.2.15.3.4.1.26
The number of receive congestions reported to the Ring Error Monitor. Receive congestion error indicates that a station recognizes a frame addressed to its specific address, but has no available buffer space. Receive congestion error is non-isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderFrameCopiedErrors 1.3.6.1.4.1.23.2.15.3.4.1.27
The number of frame copied errors reported to the Ring Error Monitor. Frame copied error indicates that a station recognizes a frame addressed to its specific address and detects that the A bits in Frame Status byte are set to 1. It implies either a line hit or duplicate address. Frame copied error is non-isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderFrequencyErrors 1.3.6.1.4.1.23.2.15.3.4.1.28
The number of frequency errors reported to the Ring Error Monitor. Frequency error indicates that a station detects that the frequency of the incoming signal differs by more than the standard specified margin. Frequency error is non-isolated error. It is a type 3 error and will cause the detect station initiating monitor contention process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderTokenErrors 1.3.6.1.4.1.23.2.15.3.4.1.29
The total number of token errors reported to the Ring Error Monitor. Token error indicates that the Active Monitor station recognizes an error condition that needs a token transmitted. Token error is non-isolated error. It is a type 2 error and the active monitor will purge the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderOutLineErrors 1.3.6.1.4.1.23.2.15.3.4.1.30
The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated error. It is a type 1 error and no ring recovery is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderOutBurstErrors 1.3.6.1.4.1.23.2.15.3.4.1.31
The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit times. Burst error is isolated error. It is a type 2 error and will casue the active monitor purging the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderInBeacons 1.3.6.1.4.1.23.2.15.3.4.1.32
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderOutBeacons 1.3.6.1.4.1.23.2.15.3.4.1.33
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingOrderInsertions 1.3.6.1.4.1.23.2.15.3.4.1.34
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tokenRingBeaconing 4
The SNMP trap that is generated when the token ring network starts beaconing.
TRAP-TYPE    

tokenRingConfigurationChange 5
The SNMP trap that is generated when the a host has entered or exited the token ring network.
TRAP-TYPE