Nortel-MsCarrier-MscPassport-OamEthernetMIB

File: Nortel-MsCarrier-MscPassport-OamEthernetMIB.mib (37417 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
DisplayString StorageType RowStatus
InterfaceIndex Integer32 MacAddress
Unsigned32 AsciiString NonReplicated
Link mscLpIndex mscLp

Defined Types

MscLpOamEnetRowStatusEntry  
SEQUENCE    
  mscLpOamEnetRowStatus RowStatus
  mscLpOamEnetComponentName DisplayString
  mscLpOamEnetStorageType StorageType
  mscLpOamEnetIndex Integer32

MscLpOamEnetCidDataEntry  
SEQUENCE    
  mscLpOamEnetCustomerIdentifier Unsigned32

MscLpOamEnetIfEntryEntry  
SEQUENCE    
  mscLpOamEnetIfAdminStatus INTEGER
  mscLpOamEnetIfIndex InterfaceIndex

MscLpOamEnetProvEntry  
SEQUENCE    
  mscLpOamEnetApplicationFramerName Link
  mscLpOamEnetSwitchoverOnFailure INTEGER
  mscLpOamEnetExtendedStatistics INTEGER

MscLpOamEnetAdminInfoEntry  
SEQUENCE    
  mscLpOamEnetVendor AsciiString
  mscLpOamEnetCommentText AsciiString

MscLpOamEnetStateEntry  
SEQUENCE    
  mscLpOamEnetAdminState INTEGER
  mscLpOamEnetOperationalState INTEGER
  mscLpOamEnetUsageState INTEGER

MscLpOamEnetOperStatusEntry  
SEQUENCE    
  mscLpOamEnetSnmpOperStatus INTEGER

MscLpOamEnetOperEntry  
SEQUENCE    
  mscLpOamEnetMacAddress MacAddress
  mscLpOamEnetActiveStatus INTEGER
  mscLpOamEnetStandbyStatus INTEGER

MscLpOamEnetOamEnetStatsEntry  
SEQUENCE    
  mscLpOamEnetClearToSendSignalLoss Counter32
  mscLpOamEnetFrameTooShort Counter32
  mscLpOamEnetNumberOfRxCollisions Counter32
  mscLpOamEnetLackOfResourcesDiscards Counter32
  mscLpOamEnetOverrunErrors Counter32

MscLpOamEnetStatsEntry  
SEQUENCE    
  mscLpOamEnetAlignmentErrors Counter32
  mscLpOamEnetFcsErrors Counter32
  mscLpOamEnetSingleCollisionFrames Counter32
  mscLpOamEnetMultipleCollisionFrames Counter32
  mscLpOamEnetSqeTestErrors Counter32
  mscLpOamEnetDeferredTransmissions Counter32
  mscLpOamEnetLateCollisions Counter32
  mscLpOamEnetExcessiveCollisions Counter32
  mscLpOamEnetMacTransmitErrors Counter32
  mscLpOamEnetCarrierSenseErrors Counter32
  mscLpOamEnetFrameTooLongs Counter32
  mscLpOamEnetMacReceiveErrors Counter32

MscLpOamEnetTestRowStatusEntry  
SEQUENCE    
  mscLpOamEnetTestRowStatus RowStatus
  mscLpOamEnetTestComponentName DisplayString
  mscLpOamEnetTestStorageType StorageType
  mscLpOamEnetTestIndex NonReplicated

MscLpOamEnetTestOperEntry  
SEQUENCE    
  mscLpOamEnetTestType INTEGER

MscLpOamEnetTestResultsEntry  
SEQUENCE    
  mscLpOamEnetTestCauseOfTermination INTEGER
  mscLpOamEnetTestTestResult INTEGER

Defined Values

oamEthernetMIB 1.3.6.1.4.1.562.36.2.2.79
OBJECT IDENTIFIER    

mscLpOamEnet 1.3.6.1.4.1.562.36.2.1.12.27
OBJECT IDENTIFIER    

mscLpOamEnetRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.27.1
This entry controls the addition and deletion of mscLpOamEnet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetRowStatusEntry

mscLpOamEnetRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.27.1.1
A single entry in the table represents a single mscLpOamEnet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetRowStatusEntry  

mscLpOamEnetRowStatus 1.3.6.1.4.1.562.36.2.1.12.27.1.1.1
This variable is used as the basis for SNMP naming of mscLpOamEnet components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscLpOamEnetComponentName 1.3.6.1.4.1.562.36.2.1.12.27.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscLpOamEnetStorageType 1.3.6.1.4.1.562.36.2.1.12.27.1.1.4
This variable represents the storage type value for the mscLpOamEnet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscLpOamEnetIndex 1.3.6.1.4.1.562.36.2.1.12.27.1.1.10
This variable represents the index for the mscLpOamEnet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..0  

mscLpOamEnetCidDataTable 1.3.6.1.4.1.562.36.2.1.12.27.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetCidDataEntry

mscLpOamEnetCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.27.10.1
An entry in the mscLpOamEnetCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetCidDataEntry  

mscLpOamEnetCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.27.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpOamEnetIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.27.11
This group contains the provisionable attributes for the ifEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetIfEntryEntry

mscLpOamEnetIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.27.11.1
An entry in the mscLpOamEnetIfEntryTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetIfEntryEntry  

mscLpOamEnetIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.27.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpOamEnetIfIndex 1.3.6.1.4.1.562.36.2.1.12.27.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpOamEnetProvTable 1.3.6.1.4.1.562.36.2.1.12.27.12
This group contains provisioned attributes for the OamEthernet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetProvEntry

mscLpOamEnetProvEntry 1.3.6.1.4.1.562.36.2.1.12.27.12.1
An entry in the mscLpOamEnetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetProvEntry  

mscLpOamEnetApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.27.12.1.1
This attribute specifies which Lan Application is running on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

mscLpOamEnetSwitchoverOnFailure 1.3.6.1.4.1.562.36.2.1.12.27.12.1.3
This attribute specifies if a CP switchover event should occur if a port or link failure is detected by the initial test process or if a steady state link failure is observed. This attribute can be set to one of the following values: enabled: This value indicates that a switchover will take place if a port or link failure is detected. disabled: This value indicates that a switchover will not take place if a port or link failure is detected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mscLpOamEnetExtendedStatistics 1.3.6.1.4.1.562.36.2.1.12.27.12.1.4
This attribute specifies if extended statistics are to be collected for the OamEthernet component. The extended statistics include: singleCollisionFrames, multipleCollisionFrames, lateCollisions, excessiveCollisions, carrierSenseErrors, and clearToSendSignalLoss. These statistics all require extra processing to gather and store which may have a negative impact on the overall performance of the OAM Ethernet port. If extendedStatistics is set to disabled, then these particular statistical attributes will be suppressed from display operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mscLpOamEnetAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.27.13
This group contains the attributes pertaining to the vendor of the equipment.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetAdminInfoEntry

mscLpOamEnetAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.27.13.1
An entry in the mscLpOamEnetAdminInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetAdminInfoEntry  

mscLpOamEnetVendor 1.3.6.1.4.1.562.36.2.1.12.27.13.1.1
This is the name of the vendor supplying the facility.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..20)  

mscLpOamEnetCommentText 1.3.6.1.4.1.562.36.2.1.12.27.13.1.2
Any miscellaneous text about the facility.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..60)  

mscLpOamEnetStateTable 1.3.6.1.4.1.562.36.2.1.12.27.15
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetStateEntry

mscLpOamEnetStateEntry 1.3.6.1.4.1.562.36.2.1.12.27.15.1
An entry in the mscLpOamEnetStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetStateEntry  

mscLpOamEnetAdminState 1.3.6.1.4.1.562.36.2.1.12.27.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpOamEnetOperationalState 1.3.6.1.4.1.562.36.2.1.12.27.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpOamEnetUsageState 1.3.6.1.4.1.562.36.2.1.12.27.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpOamEnetOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.27.16
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetOperStatusEntry

mscLpOamEnetOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.27.16.1
An entry in the mscLpOamEnetOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetOperStatusEntry  

mscLpOamEnetSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.27.16.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpOamEnetOperTable 1.3.6.1.4.1.562.36.2.1.12.27.17
This group contains the operational attributes of the OamEthernet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetOperEntry

mscLpOamEnetOperEntry 1.3.6.1.4.1.562.36.2.1.12.27.17.1
An entry in the mscLpOamEnetOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetOperEntry  

mscLpOamEnetMacAddress 1.3.6.1.4.1.562.36.2.1.12.27.17.1.1
This attribute indicates the medium access controller (MAC) address automatically assigned to the OAM Ethernet port by the system. The MAC address is displayed in canonical format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress Size(6)  

mscLpOamEnetActiveStatus 1.3.6.1.4.1.562.36.2.1.12.27.17.1.2
This attribute indicates the status of the Oam Ethernet port on the active CP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER available(1), notAvailable(2)  

mscLpOamEnetStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.27.17.1.3
This attribute indicates the status of the Oam Ethernet port on the standby CP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER available(1), notAvailable(2)  

mscLpOamEnetOamEnetStatsTable 1.3.6.1.4.1.562.36.2.1.12.27.18
This group contains statistical attributes for the OamEthernet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetOamEnetStatsEntry

mscLpOamEnetOamEnetStatsEntry 1.3.6.1.4.1.562.36.2.1.12.27.18.1
An entry in the mscLpOamEnetOamEnetStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetOamEnetStatsEntry  

mscLpOamEnetClearToSendSignalLoss 1.3.6.1.4.1.562.36.2.1.12.27.18.1.14
This attribute indicates the number of times that the clear to send signal was lost when attempting to transmit a frame. This counter wraps to zero when it exceeds its maximum value. This attribute is only active if the extendedStatistics attribute is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetFrameTooShort 1.3.6.1.4.1.562.36.2.1.12.27.18.1.15
This attribute indicates the number of frames received whose length is less than the allowed minimum frame length. This counter wraps to zero when it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetNumberOfRxCollisions 1.3.6.1.4.1.562.36.2.1.12.27.18.1.17
This attribute indicates the number of collisions detected during reception. This counter wraps to zero when it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetLackOfResourcesDiscards 1.3.6.1.4.1.562.36.2.1.12.27.18.1.18
This attribute indicates the number of good frames discarded because of a lack of resources available to contain them on the system. This counter wraps to zero when it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetOverrunErrors 1.3.6.1.4.1.562.36.2.1.12.27.18.1.19
This attribute indicates the number of frames known to be lost because the local system bus was not available. This counter wraps to zero when it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetStatsTable 1.3.6.1.4.1.562.36.2.1.12.27.19
This group contains statistical attributes for the Ethernet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetStatsEntry

mscLpOamEnetStatsEntry 1.3.6.1.4.1.562.36.2.1.12.27.19.1
An entry in the mscLpOamEnetStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetStatsEntry  

mscLpOamEnetAlignmentErrors 1.3.6.1.4.1.562.36.2.1.12.27.19.1.2
The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetFcsErrors 1.3.6.1.4.1.562.36.2.1.12.27.19.1.3
The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetSingleCollisionFrames 1.3.6.1.4.1.562.36.2.1.12.27.19.1.4
The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetMultipleCollisionFrames 1.3.6.1.4.1.562.36.2.1.12.27.19.1.5
The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetSqeTestErrors 1.3.6.1.4.1.562.36.2.1.12.27.19.1.6
The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetDeferredTransmissions 1.3.6.1.4.1.562.36.2.1.12.27.19.1.7
The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetLateCollisions 1.3.6.1.4.1.562.36.2.1.12.27.19.1.8
The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetExcessiveCollisions 1.3.6.1.4.1.562.36.2.1.12.27.19.1.9
The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetMacTransmitErrors 1.3.6.1.4.1.562.36.2.1.12.27.19.1.10
The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetCarrierSenseErrors 1.3.6.1.4.1.562.36.2.1.12.27.19.1.11
The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetFrameTooLongs 1.3.6.1.4.1.562.36.2.1.12.27.19.1.12
The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetMacReceiveErrors 1.3.6.1.4.1.562.36.2.1.12.27.19.1.13
The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter wraps around after it exceeds its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscLpOamEnetTest 1.3.6.1.4.1.562.36.2.1.12.27.2
OBJECT IDENTIFIER    

mscLpOamEnetTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.27.2.1
This entry controls the addition and deletion of mscLpOamEnetTest components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetTestRowStatusEntry

mscLpOamEnetTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.27.2.1.1
A single entry in the table represents a single mscLpOamEnetTest component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetTestRowStatusEntry  

mscLpOamEnetTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.27.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpOamEnetTest components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscLpOamEnetTestComponentName 1.3.6.1.4.1.562.36.2.1.12.27.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscLpOamEnetTestStorageType 1.3.6.1.4.1.562.36.2.1.12.27.2.1.1.4
This variable represents the storage type value for the mscLpOamEnetTest tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscLpOamEnetTestIndex 1.3.6.1.4.1.562.36.2.1.12.27.2.1.1.10
This variable represents the index for the mscLpOamEnetTest tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscLpOamEnetTestOperTable 1.3.6.1.4.1.562.36.2.1.12.27.2.10
This group contains the operational data for the Test component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetTestOperEntry

mscLpOamEnetTestOperEntry 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1
An entry in the mscLpOamEnetTestOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetTestOperEntry  

mscLpOamEnetTestType 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1.1
This attribute is the type of test to be run. The four types of tests available are: the port hardware logic test, the configure and dump memory registers test, the memory mapping test and the Time Domain Reflectometry (TDR) test. The possible values of this attribute are: hardwareLogic: this test checks the port hardware controller for logic errors in some of the on-chip counters and shift registers. configuration: this test configures the memory registers of the hardware controller in a predetermined way and then dumps the registers and checks their contents for errors. memoryMap: this test does an extensive test of the memory structures used by the OAM Ethernet port to verify that they are configured correctly and are error-free. tdr: this test is used to detect and locate cable faults caused by either a short or an open circuit on the coaxial cable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hardwareLogic(0), configuration(1), memoryMap(2), tdr(3)  

mscLpOamEnetTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.27.2.11
This group contains all the statistics related attributes of the Test component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOamEnetTestResultsEntry

mscLpOamEnetTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.27.2.11.1
An entry in the mscLpOamEnetTestResultsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscLpOamEnetTestResultsEntry  

mscLpOamEnetTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.27.2.11.1.1
This attribute records the reason why the test terminated. The possible values of this attribute are: testTimeExpired: this value indicates the time allotted for the test to run has expired which caused the test terminate. If the port is locked without the forever option then it will remain locked for only five minutes before being automatically unlocked. If the port unlocks itself after five minutes while the test is running then this attribute will be set to testTimeExpired. If the forever option is used then the test will run until completion, failure, or a Stop command. stoppedByOperator: this value indicates that the test was terminated when an operator issued a Stop command. unknown: this value indicates that the test terminated for an unknown reason. neverStarted: this value indicates that the test never started because the port could not be locked or because there is a hardware failure preventing the tests from running. testRunning: this value indicates that the test is currently running. testComplete: this value indicates that the test completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), testComplete(5)  

mscLpOamEnetTestTestResult 1.3.6.1.4.1.562.36.2.1.12.27.2.11.1.2
This attribute records the result of last port test executed on the OAM Ethernet port. The result can be one of the following values. pass: the test passed fail: the test failed neverRun: the test has not been run running: the test is running
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER neverRun(0), fail(1), pass(2), running(3)  

oamEthernetGroup 1.3.6.1.4.1.562.36.2.2.79.1
OBJECT IDENTIFIER    

oamEthernetGroupCA 1.3.6.1.4.1.562.36.2.2.79.1.1
OBJECT IDENTIFIER    

oamEthernetGroupCA02 1.3.6.1.4.1.562.36.2.2.79.1.1.3
OBJECT IDENTIFIER    

oamEthernetGroupCA02A 1.3.6.1.4.1.562.36.2.2.79.1.1.3.2
OBJECT IDENTIFIER    

oamEthernetCapabilities 1.3.6.1.4.1.562.36.2.2.79.3
OBJECT IDENTIFIER    

oamEthernetCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.79.3.1
OBJECT IDENTIFIER    

oamEthernetCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.79.3.1.3
OBJECT IDENTIFIER    

oamEthernetCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.79.3.1.3.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor