MscAtmIfVptPnniRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniComponentName |
DisplayString |
|
|
mscAtmIfVptPnniStorageType |
StorageType |
|
|
mscAtmIfVptPnniIndex |
NonReplicated |
|
MscAtmIfVptPnniProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSoftPvcRetryPeriod |
Unsigned32 |
|
|
mscAtmIfVptPnniSoftPvpAndPvcRetryPeriod |
Unsigned32 |
|
|
mscAtmIfVptPnniSoftPvpAndPvcHoldOffTime |
Unsigned32 |
|
MscAtmIfVptPnniAdminWeightsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniCbrWeight |
Unsigned32 |
|
|
mscAtmIfVptPnniRtVbrWeight |
Unsigned32 |
|
|
mscAtmIfVptPnniNrtVbrWeight |
Unsigned32 |
|
|
mscAtmIfVptPnniUbrWeight |
Unsigned32 |
|
MscAtmIfVptPnniAcctOptEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniAccountCollection |
OCTET STRING |
|
|
mscAtmIfVptPnniAccountConnectionType |
INTEGER |
|
|
mscAtmIfVptPnniAccountClass |
Unsigned32 |
|
|
mscAtmIfVptPnniServiceExchange |
Unsigned32 |
|
MscAtmIfVptPnniSigRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniSigComponentName |
DisplayString |
|
|
mscAtmIfVptPnniSigStorageType |
StorageType |
|
|
mscAtmIfVptPnniSigIndex |
NonReplicated |
|
MscAtmIfVptPnniSigProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigVci |
Unsigned32 |
|
|
mscAtmIfVptPnniSigAddressConversion |
INTEGER |
|
|
mscAtmIfVptPnniSigOperatingMode |
INTEGER |
|
MscAtmIfVptPnniSigStateEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigAdminState |
INTEGER |
|
|
mscAtmIfVptPnniSigOperationalState |
INTEGER |
|
|
mscAtmIfVptPnniSigUsageState |
INTEGER |
|
MscAtmIfVptPnniSigOperEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigLastTxCauseCode |
Unsigned32 |
|
|
mscAtmIfVptPnniSigLastTxDiagCode |
Hex |
|
|
mscAtmIfVptPnniSigLastRxCauseCode |
Unsigned32 |
|
|
mscAtmIfVptPnniSigLastRxDiagCode |
Hex |
|
MscAtmIfVptPnniSigStatsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigCurrentConnections |
Counter32 |
|
|
mscAtmIfVptPnniSigPeakConnections |
Gauge32 |
|
|
mscAtmIfVptPnniSigSuccessfulConnections |
Counter32 |
|
|
mscAtmIfVptPnniSigFailedConnections |
Counter32 |
|
|
mscAtmIfVptPnniSigTxPdus |
Counter32 |
|
|
mscAtmIfVptPnniSigRxPdus |
Counter32 |
|
|
mscAtmIfVptPnniSigCurrentPmpConnections |
Gauge32 |
|
|
mscAtmIfVptPnniSigPeakPmpConnections |
Gauge32 |
|
|
mscAtmIfVptPnniSigSuccessfulPmpConnections |
Counter32 |
|
|
mscAtmIfVptPnniSigFailedPmpConnections |
Counter32 |
|
|
mscAtmIfVptPnniSigNewCurrentConnections |
Gauge32 |
|
MscAtmIfVptPnniSigVcdRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigVcdRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniSigVcdComponentName |
DisplayString |
|
|
mscAtmIfVptPnniSigVcdStorageType |
StorageType |
|
|
mscAtmIfVptPnniSigVcdIndex |
NonReplicated |
|
MscAtmIfVptPnniSigVcdProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigVcdTrafficDescType |
INTEGER |
|
|
mscAtmIfVptPnniSigVcdAtmServiceCategory |
INTEGER |
|
|
mscAtmIfVptPnniSigVcdWeight |
Unsigned32 |
|
|
mscAtmIfVptPnniSigVcdQosClass |
INTEGER |
|
|
mscAtmIfVptPnniSigVcdTrafficShaping |
INTEGER |
|
|
mscAtmIfVptPnniSigVcdUnshapedTransmitQueueing |
INTEGER |
|
|
mscAtmIfVptPnniSigVcdUsageParameterControl |
INTEGER |
|
MscAtmIfVptPnniSigVcdTdpEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniSigVcdTdpIndex |
Integer32 |
|
|
mscAtmIfVptPnniSigVcdTdpValue |
Unsigned32 |
|
MscAtmIfVptPnniRccRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniRccComponentName |
DisplayString |
|
|
mscAtmIfVptPnniRccStorageType |
StorageType |
|
|
mscAtmIfVptPnniRccIndex |
NonReplicated |
|
MscAtmIfVptPnniRccHlParmsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccHelloHoldDown |
FixedPoint1 |
|
|
mscAtmIfVptPnniRccHelloInterval |
Unsigned32 |
|
|
mscAtmIfVptPnniRccHelloInactivityFactor |
Unsigned32 |
|
MscAtmIfVptPnniRccStateEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccAdminState |
INTEGER |
|
|
mscAtmIfVptPnniRccOperationalState |
INTEGER |
|
|
mscAtmIfVptPnniRccUsageState |
INTEGER |
|
MscAtmIfVptPnniRccOperEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccType |
INTEGER |
|
|
mscAtmIfVptPnniRccNegotiatedVersion |
INTEGER |
|
|
mscAtmIfVptPnniRccHelloState |
INTEGER |
|
|
mscAtmIfVptPnniRccRemoteNodeId |
HexString |
|
|
mscAtmIfVptPnniRccRemotePortId |
Unsigned32 |
|
MscAtmIfVptPnniRccStatsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccHelloPacketsRx |
Counter32 |
|
|
mscAtmIfVptPnniRccHelloPacketsTx |
Counter32 |
|
|
mscAtmIfVptPnniRccMismatchedHelloPacketsRx |
Counter32 |
|
|
mscAtmIfVptPnniRccBadHelloPacketsRx |
Counter32 |
|
MscAtmIfVptPnniRccVcdRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccVcdRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniRccVcdComponentName |
DisplayString |
|
|
mscAtmIfVptPnniRccVcdStorageType |
StorageType |
|
|
mscAtmIfVptPnniRccVcdIndex |
NonReplicated |
|
MscAtmIfVptPnniRccVcdProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccVcdTrafficDescType |
INTEGER |
|
|
mscAtmIfVptPnniRccVcdAtmServiceCategory |
INTEGER |
|
|
mscAtmIfVptPnniRccVcdWeight |
Unsigned32 |
|
|
mscAtmIfVptPnniRccVcdQosClass |
INTEGER |
|
|
mscAtmIfVptPnniRccVcdTrafficShaping |
INTEGER |
|
|
mscAtmIfVptPnniRccVcdUnshapedTransmitQueueing |
INTEGER |
|
|
mscAtmIfVptPnniRccVcdUsageParameterControl |
INTEGER |
|
MscAtmIfVptPnniRccVcdTdpEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniRccVcdTdpIndex |
Integer32 |
|
|
mscAtmIfVptPnniRccVcdTdpValue |
Unsigned32 |
|
MscAtmIfVptPnniAddrRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniAddrRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniAddrComponentName |
DisplayString |
|
|
mscAtmIfVptPnniAddrStorageType |
StorageType |
|
|
mscAtmIfVptPnniAddrAddressIndex |
AsciiStringIndex |
|
|
mscAtmIfVptPnniAddrAddressTypeIndex |
INTEGER |
|
MscAtmIfVptPnniAddrOperEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniAddrScope |
INTEGER |
|
|
mscAtmIfVptPnniAddrReachability |
INTEGER |
|
MscAtmIfVptPnniAddrTermSPRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniAddrTermSPRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniAddrTermSPComponentName |
DisplayString |
|
|
mscAtmIfVptPnniAddrTermSPStorageType |
StorageType |
|
|
mscAtmIfVptPnniAddrTermSPIndex |
NonReplicated |
|
MscAtmIfVptPnniAddrPnniInfoRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniAddrPnniInfoRowStatus |
RowStatus |
|
|
mscAtmIfVptPnniAddrPnniInfoComponentName |
DisplayString |
|
|
mscAtmIfVptPnniAddrPnniInfoStorageType |
StorageType |
|
|
mscAtmIfVptPnniAddrPnniInfoIndex |
NonReplicated |
|
MscAtmIfVptPnniAddrPnniInfoProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfVptPnniAddrPnniInfoScope |
INTEGER |
|
|
mscAtmIfVptPnniAddrPnniInfoReachability |
INTEGER |
|
MscAtmIfPnniRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRowStatus |
RowStatus |
|
|
mscAtmIfPnniComponentName |
DisplayString |
|
|
mscAtmIfPnniStorageType |
StorageType |
|
|
mscAtmIfPnniIndex |
NonReplicated |
|
MscAtmIfPnniProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSoftPvcRetryPeriod |
Unsigned32 |
|
|
mscAtmIfPnniSoftPvpAndPvcRetryPeriod |
Unsigned32 |
|
|
mscAtmIfPnniSoftPvpAndPvcHoldOffTime |
Unsigned32 |
|
MscAtmIfPnniAdminWeightsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniCbrWeight |
Unsigned32 |
|
|
mscAtmIfPnniRtVbrWeight |
Unsigned32 |
|
|
mscAtmIfPnniNrtVbrWeight |
Unsigned32 |
|
|
mscAtmIfPnniUbrWeight |
Unsigned32 |
|
MscAtmIfPnniAcctOptEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniAccountCollection |
OCTET STRING |
|
|
mscAtmIfPnniAccountConnectionType |
INTEGER |
|
|
mscAtmIfPnniAccountClass |
Unsigned32 |
|
|
mscAtmIfPnniServiceExchange |
Unsigned32 |
|
MscAtmIfPnniSigRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigRowStatus |
RowStatus |
|
|
mscAtmIfPnniSigComponentName |
DisplayString |
|
|
mscAtmIfPnniSigStorageType |
StorageType |
|
|
mscAtmIfPnniSigIndex |
NonReplicated |
|
MscAtmIfPnniSigProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigVci |
Unsigned32 |
|
|
mscAtmIfPnniSigAddressConversion |
INTEGER |
|
|
mscAtmIfPnniSigOperatingMode |
INTEGER |
|
MscAtmIfPnniSigStateEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigAdminState |
INTEGER |
|
|
mscAtmIfPnniSigOperationalState |
INTEGER |
|
|
mscAtmIfPnniSigUsageState |
INTEGER |
|
MscAtmIfPnniSigOperEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigLastTxCauseCode |
Unsigned32 |
|
|
mscAtmIfPnniSigLastTxDiagCode |
Hex |
|
|
mscAtmIfPnniSigLastRxCauseCode |
Unsigned32 |
|
|
mscAtmIfPnniSigLastRxDiagCode |
Hex |
|
MscAtmIfPnniSigStatsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigCurrentConnections |
Counter32 |
|
|
mscAtmIfPnniSigPeakConnections |
Gauge32 |
|
|
mscAtmIfPnniSigSuccessfulConnections |
Counter32 |
|
|
mscAtmIfPnniSigFailedConnections |
Counter32 |
|
|
mscAtmIfPnniSigTxPdus |
Counter32 |
|
|
mscAtmIfPnniSigRxPdus |
Counter32 |
|
|
mscAtmIfPnniSigCurrentPmpConnections |
Gauge32 |
|
|
mscAtmIfPnniSigPeakPmpConnections |
Gauge32 |
|
|
mscAtmIfPnniSigSuccessfulPmpConnections |
Counter32 |
|
|
mscAtmIfPnniSigFailedPmpConnections |
Counter32 |
|
|
mscAtmIfPnniSigNewCurrentConnections |
Gauge32 |
|
MscAtmIfPnniSigVcdRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigVcdRowStatus |
RowStatus |
|
|
mscAtmIfPnniSigVcdComponentName |
DisplayString |
|
|
mscAtmIfPnniSigVcdStorageType |
StorageType |
|
|
mscAtmIfPnniSigVcdIndex |
NonReplicated |
|
MscAtmIfPnniSigVcdProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigVcdTrafficDescType |
INTEGER |
|
|
mscAtmIfPnniSigVcdAtmServiceCategory |
INTEGER |
|
|
mscAtmIfPnniSigVcdWeight |
Unsigned32 |
|
|
mscAtmIfPnniSigVcdQosClass |
INTEGER |
|
|
mscAtmIfPnniSigVcdTrafficShaping |
INTEGER |
|
|
mscAtmIfPnniSigVcdUnshapedTransmitQueueing |
INTEGER |
|
|
mscAtmIfPnniSigVcdUsageParameterControl |
INTEGER |
|
MscAtmIfPnniSigVcdTdpEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniSigVcdTdpIndex |
Integer32 |
|
|
mscAtmIfPnniSigVcdTdpValue |
Unsigned32 |
|
MscAtmIfPnniRccRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccRowStatus |
RowStatus |
|
|
mscAtmIfPnniRccComponentName |
DisplayString |
|
|
mscAtmIfPnniRccStorageType |
StorageType |
|
|
mscAtmIfPnniRccIndex |
NonReplicated |
|
MscAtmIfPnniRccHlParmsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccHelloHoldDown |
FixedPoint1 |
|
|
mscAtmIfPnniRccHelloInterval |
Unsigned32 |
|
|
mscAtmIfPnniRccHelloInactivityFactor |
Unsigned32 |
|
MscAtmIfPnniRccStateEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccAdminState |
INTEGER |
|
|
mscAtmIfPnniRccOperationalState |
INTEGER |
|
|
mscAtmIfPnniRccUsageState |
INTEGER |
|
MscAtmIfPnniRccOperEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccType |
INTEGER |
|
|
mscAtmIfPnniRccNegotiatedVersion |
INTEGER |
|
|
mscAtmIfPnniRccHelloState |
INTEGER |
|
|
mscAtmIfPnniRccRemoteNodeId |
HexString |
|
|
mscAtmIfPnniRccRemotePortId |
Unsigned32 |
|
MscAtmIfPnniRccStatsEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccHelloPacketsRx |
Counter32 |
|
|
mscAtmIfPnniRccHelloPacketsTx |
Counter32 |
|
|
mscAtmIfPnniRccMismatchedHelloPacketsRx |
Counter32 |
|
|
mscAtmIfPnniRccBadHelloPacketsRx |
Counter32 |
|
MscAtmIfPnniRccVcdRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccVcdRowStatus |
RowStatus |
|
|
mscAtmIfPnniRccVcdComponentName |
DisplayString |
|
|
mscAtmIfPnniRccVcdStorageType |
StorageType |
|
|
mscAtmIfPnniRccVcdIndex |
NonReplicated |
|
MscAtmIfPnniRccVcdProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccVcdTrafficDescType |
INTEGER |
|
|
mscAtmIfPnniRccVcdAtmServiceCategory |
INTEGER |
|
|
mscAtmIfPnniRccVcdWeight |
Unsigned32 |
|
|
mscAtmIfPnniRccVcdQosClass |
INTEGER |
|
|
mscAtmIfPnniRccVcdTrafficShaping |
INTEGER |
|
|
mscAtmIfPnniRccVcdUnshapedTransmitQueueing |
INTEGER |
|
|
mscAtmIfPnniRccVcdUsageParameterControl |
INTEGER |
|
MscAtmIfPnniRccVcdTdpEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniRccVcdTdpIndex |
Integer32 |
|
|
mscAtmIfPnniRccVcdTdpValue |
Unsigned32 |
|
MscAtmIfPnniAddrRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniAddrRowStatus |
RowStatus |
|
|
mscAtmIfPnniAddrComponentName |
DisplayString |
|
|
mscAtmIfPnniAddrStorageType |
StorageType |
|
|
mscAtmIfPnniAddrAddressIndex |
AsciiStringIndex |
|
|
mscAtmIfPnniAddrAddressTypeIndex |
INTEGER |
|
MscAtmIfPnniAddrOperEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniAddrScope |
INTEGER |
|
|
mscAtmIfPnniAddrReachability |
INTEGER |
|
MscAtmIfPnniAddrTermSPRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniAddrTermSPRowStatus |
RowStatus |
|
|
mscAtmIfPnniAddrTermSPComponentName |
DisplayString |
|
|
mscAtmIfPnniAddrTermSPStorageType |
StorageType |
|
|
mscAtmIfPnniAddrTermSPIndex |
NonReplicated |
|
MscAtmIfPnniAddrPnniInfoRowStatusEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniAddrPnniInfoRowStatus |
RowStatus |
|
|
mscAtmIfPnniAddrPnniInfoComponentName |
DisplayString |
|
|
mscAtmIfPnniAddrPnniInfoStorageType |
StorageType |
|
|
mscAtmIfPnniAddrPnniInfoIndex |
NonReplicated |
|
MscAtmIfPnniAddrPnniInfoProvEntry |
|
SEQUENCE |
|
|
|
|
mscAtmIfPnniAddrPnniInfoScope |
INTEGER |
|
|
mscAtmIfPnniAddrPnniInfoReachability |
INTEGER |
|
mscAtmIfVptPnniRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnni component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRowStatusEntry |
|
|
mscAtmIfVptPnniProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.10.1 |
An entry in the mscAtmIfVptPnniProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniProvEntry |
|
|
mscAtmIfVptPnniAdminWeightsEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.11.1 |
An entry in the mscAtmIfVptPnniAdminWeightsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAdminWeightsEntry |
|
|
mscAtmIfVptPnniAcctOptEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.12.1 |
An entry in the mscAtmIfVptPnniAcctOptTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAcctOptEntry |
|
|
mscAtmIfVptPnniOperationalEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.13.1 |
An entry in the mscAtmIfVptPnniOperationalTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniOperationalEntry |
|
|
mscAtmIfVptPnniVProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.14.1 |
An entry in the mscAtmIfVptPnniVProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniVProvEntry |
|
|
mscAtmIfVptPnniSigRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniSig component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigRowStatusEntry |
|
|
mscAtmIfVptPnniSigProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1 |
An entry in the mscAtmIfVptPnniSigProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigProvEntry |
|
|
mscAtmIfVptPnniSigStateEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1 |
An entry in the mscAtmIfVptPnniSigStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigStateEntry |
|
|
mscAtmIfVptPnniSigOperEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1 |
An entry in the mscAtmIfVptPnniSigOperTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigOperEntry |
|
|
mscAtmIfVptPnniSigStatsEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1 |
An entry in the mscAtmIfVptPnniSigStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigStatsEntry |
|
|
mscAtmIfVptPnniSigVcdRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniSigVcd component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigVcdRowStatusEntry |
|
|
mscAtmIfVptPnniSigVcdProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1 |
An entry in the mscAtmIfVptPnniSigVcdProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigVcdProvEntry |
|
|
mscAtmIfVptPnniSigVcdAtmServiceCategory |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.3 |
This attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3) |
|
mscAtmIfVptPnniSigVcdWeight |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.4 |
This attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..4095 | 65535 |
|
mscAtmIfVptPnniSigVcdTdpTable |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387 |
This attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MscAtmIfVptPnniSigVcdTdpEntry |
|
mscAtmIfVptPnniSigVcdTdpEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1 |
An entry in the mscAtmIfVptPnniSigVcdTdpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniSigVcdTdpEntry |
|
|
mscAtmIfVptPnniRccRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniRcc component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccRowStatusEntry |
|
|
mscAtmIfVptPnniRccProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1 |
An entry in the mscAtmIfVptPnniRccProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccProvEntry |
|
|
mscAtmIfVptPnniRccHlParmsEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1 |
An entry in the mscAtmIfVptPnniRccHlParmsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccHlParmsEntry |
|
|
mscAtmIfVptPnniRccStateEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1 |
An entry in the mscAtmIfVptPnniRccStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccStateEntry |
|
|
mscAtmIfVptPnniRccOperEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1 |
An entry in the mscAtmIfVptPnniRccOperTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccOperEntry |
|
|
mscAtmIfVptPnniRccHelloState |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.3 |
This attribute indicates the state of the Hello protocol exchange over
this link. The following are the possible values for this attribute:
down: the link is down; no PNNI routing packets will be sent over
or received over such a link. This is the initial state of the Hello
Finite State Machine, and can also be reached when lower-level
protocols have indicated that the link is not usable.
attempt: no Hello packets or Hello packets, with mismatch
information, have been received recently from the neighbor.
Attempts are made to contact the neighbor node by sending out
Hello packets every helloInterval seconds.
oneWayInside: Hello packets have been recently received from the
neighbor and it has been established that both nodes are members of
the same peer group, but the remote node ID and remote port ID in
the neighbor's Hello packets were set to zero. A Hello packet is sent
to the neighbor and the Hello timer is restarted.
twoWayInside: Bidirectional communication over this link between
this node and the neighbor node has been achieved.
oneWayOutside: Hello packets have been recently received from
the neighbor and it has been established that both nodes are
members of a different peer group, but the remote node ID and
remote port ID in the neighbor's Hello packets were set to zero.
twoWayOutside: Hellos have recently been received from the
neighbor indicating that the neighbor node belongs to a different
peer group. The correct remote node ID and remote port ID fields
were included in the Hello packet, but the nodal hierarchy list did
not include any common peer group. This state can also be reached
if a hierarchy mismatch occurs while in the commonOutside state.
commonOutside: A common level of the routing hierarchy has been
found, in addition to achieving full bi-directional communication
between the two nodes. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7) |
|
mscAtmIfVptPnniRccStatsEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1 |
An entry in the mscAtmIfVptPnniRccStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccStatsEntry |
|
|
mscAtmIfVptPnniRccVcdRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniRccVcd component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccVcdRowStatusEntry |
|
|
mscAtmIfVptPnniRccVcdProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1 |
An entry in the mscAtmIfVptPnniRccVcdProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccVcdProvEntry |
|
|
mscAtmIfVptPnniRccVcdAtmServiceCategory |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.3 |
This attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3) |
|
mscAtmIfVptPnniRccVcdWeight |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.4 |
This attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..4095 | 65535 |
|
mscAtmIfVptPnniRccVcdTdpTable |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387 |
This attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MscAtmIfVptPnniRccVcdTdpEntry |
|
mscAtmIfVptPnniRccVcdTdpEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1 |
An entry in the mscAtmIfVptPnniRccVcdTdpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniRccVcdTdpEntry |
|
|
mscAtmIfVptPnniAddrRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniAddr component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAddrRowStatusEntry |
|
|
mscAtmIfVptPnniAddrOperEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1 |
An entry in the mscAtmIfVptPnniAddrOperTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAddrOperEntry |
|
|
mscAtmIfVptPnniAddrTermSPRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniAddrTermSP component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAddrTermSPRowStatusEntry |
|
|
mscAtmIfVptPnniAddrPnniInfoRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1 |
A single entry in the table represents a single
mscAtmIfVptPnniAddrPnniInfo component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAddrPnniInfoRowStatusEntry |
|
|
mscAtmIfVptPnniAddrPnniInfoProvEntry |
1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1 |
An entry in the mscAtmIfVptPnniAddrPnniInfoProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfVptPnniAddrPnniInfoProvEntry |
|
|
mscAtmIfPnniRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.1.1 |
A single entry in the table represents a single
mscAtmIfPnni component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRowStatusEntry |
|
|
mscAtmIfPnniProvEntry |
1.3.6.1.4.1.562.36.2.1.114.96.10.1 |
An entry in the mscAtmIfPnniProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniProvEntry |
|
|
mscAtmIfPnniAdminWeightsEntry |
1.3.6.1.4.1.562.36.2.1.114.96.11.1 |
An entry in the mscAtmIfPnniAdminWeightsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAdminWeightsEntry |
|
|
mscAtmIfPnniAcctOptEntry |
1.3.6.1.4.1.562.36.2.1.114.96.12.1 |
An entry in the mscAtmIfPnniAcctOptTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAcctOptEntry |
|
|
mscAtmIfPnniOperationalEntry |
1.3.6.1.4.1.562.36.2.1.114.96.13.1 |
An entry in the mscAtmIfPnniOperationalTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniOperationalEntry |
|
|
mscAtmIfPnniSigRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.1.1 |
A single entry in the table represents a single
mscAtmIfPnniSig component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigRowStatusEntry |
|
|
mscAtmIfPnniSigProvEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.10.1 |
An entry in the mscAtmIfPnniSigProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigProvEntry |
|
|
mscAtmIfPnniSigStateEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.11.1 |
An entry in the mscAtmIfPnniSigStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigStateEntry |
|
|
mscAtmIfPnniSigOperEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.12.1 |
An entry in the mscAtmIfPnniSigOperTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigOperEntry |
|
|
mscAtmIfPnniSigStatsEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.13.1 |
An entry in the mscAtmIfPnniSigStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigStatsEntry |
|
|
mscAtmIfPnniSigVcdRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1 |
A single entry in the table represents a single
mscAtmIfPnniSigVcd component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigVcdRowStatusEntry |
|
|
mscAtmIfPnniSigVcdProvEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1 |
An entry in the mscAtmIfPnniSigVcdProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigVcdProvEntry |
|
|
mscAtmIfPnniSigVcdAtmServiceCategory |
1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.3 |
This attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3) |
|
mscAtmIfPnniSigVcdTdpTable |
1.3.6.1.4.1.562.36.2.1.114.96.2.2.387 |
This attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MscAtmIfPnniSigVcdTdpEntry |
|
mscAtmIfPnniSigVcdTdpEntry |
1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1 |
An entry in the mscAtmIfPnniSigVcdTdpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniSigVcdTdpEntry |
|
|
mscAtmIfPnniRccRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.1.1 |
A single entry in the table represents a single
mscAtmIfPnniRcc component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccRowStatusEntry |
|
|
mscAtmIfPnniRccProvEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.10.1 |
An entry in the mscAtmIfPnniRccProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccProvEntry |
|
|
mscAtmIfPnniRccHlParmsEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.11.1 |
An entry in the mscAtmIfPnniRccHlParmsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccHlParmsEntry |
|
|
mscAtmIfPnniRccStateEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.12.1 |
An entry in the mscAtmIfPnniRccStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccStateEntry |
|
|
mscAtmIfPnniRccOperEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.13.1 |
An entry in the mscAtmIfPnniRccOperTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccOperEntry |
|
|
mscAtmIfPnniRccHelloState |
1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.3 |
This attribute indicates the state of the Hello protocol exchange over
this link. The following are the possible values for this attribute:
down: the link is down; no PNNI routing packets will be sent over
or received over such a link. This is the initial state of the Hello
Finite State Machine, and can also be reached when lower-level
protocols have indicated that the link is not usable.
attempt: no Hello packets or Hello packets, with mismatch
information, have been received recently from the neighbor.
Attempts are made to contact the neighbor node by sending out
Hello packets every helloInterval seconds.
oneWayInside: Hello packets have been recently received from the
neighbor and it has been established that both nodes are members of
the same peer group, but the remote node ID and remote port ID in
the neighbor's Hello packets were set to zero. A Hello packet is sent
to the neighbor and the Hello timer is restarted.
twoWayInside: Bidirectional communication over this link between
this node and the neighbor node has been achieved.
oneWayOutside: Hello packets have been recently received from
the neighbor and it has been established that both nodes are
members of a different peer group, but the remote node ID and
remote port ID in the neighbor's Hello packets were set to zero.
twoWayOutside: Hellos have recently been received from the
neighbor indicating that the neighbor node belongs to a different
peer group. The correct remote node ID and remote port ID fields
were included in the Hello packet, but the nodal hierarchy list did
not include any common peer group. This state can also be reached
if a hierarchy mismatch occurs while in the commonOutside state.
commonOutside: A common level of the routing hierarchy has been
found, in addition to achieving full bi-directional communication
between the two nodes. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7) |
|
mscAtmIfPnniRccStatsEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.14.1 |
An entry in the mscAtmIfPnniRccStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccStatsEntry |
|
|
mscAtmIfPnniRccVcdRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1 |
A single entry in the table represents a single
mscAtmIfPnniRccVcd component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccVcdRowStatusEntry |
|
|
mscAtmIfPnniRccVcdProvEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1 |
An entry in the mscAtmIfPnniRccVcdProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccVcdProvEntry |
|
|
mscAtmIfPnniRccVcdAtmServiceCategory |
1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.3 |
This attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3) |
|
mscAtmIfPnniRccVcdTdpTable |
1.3.6.1.4.1.562.36.2.1.114.96.3.2.387 |
This attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MscAtmIfPnniRccVcdTdpEntry |
|
mscAtmIfPnniRccVcdTdpEntry |
1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1 |
An entry in the mscAtmIfPnniRccVcdTdpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniRccVcdTdpEntry |
|
|
mscAtmIfPnniAddrRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.4.1.1 |
A single entry in the table represents a single
mscAtmIfPnniAddr component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAddrRowStatusEntry |
|
|
mscAtmIfPnniAddrOperEntry |
1.3.6.1.4.1.562.36.2.1.114.96.4.10.1 |
An entry in the mscAtmIfPnniAddrOperTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAddrOperEntry |
|
|
mscAtmIfPnniAddrTermSPRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1 |
A single entry in the table represents a single
mscAtmIfPnniAddrTermSP component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAddrTermSPRowStatusEntry |
|
|
mscAtmIfPnniAddrPnniInfoRowStatusEntry |
1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1 |
A single entry in the table represents a single
mscAtmIfPnniAddrPnniInfo component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAddrPnniInfoRowStatusEntry |
|
|
mscAtmIfPnniAddrPnniInfoProvEntry |
1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1 |
An entry in the mscAtmIfPnniAddrPnniInfoProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MscAtmIfPnniAddrPnniInfoProvEntry |
|
|