Nortel-MsCarrier-MscPassport-AppnMIB

File: Nortel-MsCarrier-MscPassport-AppnMIB.mib (512377 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE TimeTicks mscPassportMIBs
mscComponents RowPointer DisplayString
StorageType RowStatus Gauge32
Integer32 Unsigned32 AsciiString
Hex NonReplicated HexString
EnterpriseDateAndTime PassportCounter64 Link
AsciiStringIndex DigitString DashedHexString

Defined Types

MscAppnRowStatusEntry  
SEQUENCE    
  mscAppnRowStatus RowStatus
  mscAppnComponentName DisplayString
  mscAppnStorageType StorageType
  mscAppnIndex AsciiStringIndex

MscAppnProcessParmsEntry  
SEQUENCE    
  mscAppnLogicalProcessor Link
  mscAppnMaximumSvcs Unsigned32
  mscAppnMaximumLinkStations Unsigned32

MscAppnControlPointCreateParmsEntry  
SEQUENCE    
  mscAppnFqCpName AsciiString
  mscAppnBlockNumber Hex
  mscAppnIdNumber Hex
  mscAppnRouteAdditionResistance Unsigned32
  mscAppnFeatures OCTET STRING
  mscAppnMaximumLocates Unsigned32
  mscAppnMaximumDirectorySize Unsigned32
  mscAppnMdsTxAlertQueueSize Unsigned32
  mscAppnTreeCacheSize Unsigned32
  mscAppnTreeCacheUseLimit Unsigned32
  mscAppnMaximumTopologyNodes Unsigned32
  mscAppnMaximumTopologyTgs Unsigned32
  mscAppnMaximumIsrSessions Unsigned32
  mscAppnIsrUpperCongestionThreshold Unsigned32
  mscAppnIsrLowerCongestionThreshold Unsigned32
  mscAppnIsrMaxRuSize Unsigned32
  mscAppnIsrRxPacingWindow Unsigned32
  mscAppnLocateTimeout Unsigned32
  mscAppnHprSupport INTEGER
  mscAppnDlurSupport INTEGER

MscAppnStateEntry  
SEQUENCE    
  mscAppnAdminState INTEGER
  mscAppnOperationalState INTEGER
  mscAppnUsageState INTEGER

MscAppnOperationalEntry  
SEQUENCE    
  mscAppnUpTime Unsigned32
  mscAppnHeapSpaceLimit Gauge32
  mscAppnHeapSpaceCurrent Gauge32
  mscAppnMemWarningThreshold Unsigned32
  mscAppnMemCriticalThreshold Unsigned32
  mscAppnNnFunctionsSupported OCTET STRING
  mscAppnGeneralFunctionsSupported OCTET STRING
  mscAppnStatus OCTET STRING
  mscAppnFlowReductionSequenceNumber Unsigned32
  mscAppnResourceSequenceNumber Unsigned32
  mscAppnDefinedLsGoodXids PassportCounter64
  mscAppnDefinedLsBadXids PassportCounter64
  mscAppnDynamicLsGoodXids PassportCounter64
  mscAppnDynamicLsBadXids PassportCounter64
  mscAppnActiveSvcs Unsigned32
  mscAppnActiveLinkStations Unsigned32

MscAppnDnaRowStatusEntry  
SEQUENCE    
  mscAppnDnaRowStatus RowStatus
  mscAppnDnaComponentName DisplayString
  mscAppnDnaStorageType StorageType
  mscAppnDnaIndex NonReplicated

MscAppnDnaAddressEntry  
SEQUENCE    
  mscAppnDnaNumberingPlanIndicator INTEGER
  mscAppnDnaDataNetworkAddress DigitString

MscAppnDnaOutgoingOptionsEntry  
SEQUENCE    
  mscAppnDnaOutDefaultPriority INTEGER
  mscAppnDnaOutDefaultPathSensitivity INTEGER
  mscAppnDnaOutPathSensitivityOverRide INTEGER
  mscAppnDnaOutDefaultPathReliability INTEGER
  mscAppnDnaOutAccess INTEGER
  mscAppnDnaDefaultTransferPriority INTEGER
  mscAppnDnaTransferPriorityOverRide INTEGER

MscAppnDnaIncomingOptionsEntry  
SEQUENCE    
  mscAppnDnaIncAccess INTEGER

MscAppnDnaCallOptionsEntry  
SEQUENCE    
  mscAppnDnaDefaultRecvFrmNetworkThruputClass Unsigned32
  mscAppnDnaDefaultSendToNetworkThruputClass Unsigned32
  mscAppnDnaDefaultRecvFrmNetworkWindowSize Unsigned32
  mscAppnDnaDefaultSendToNetworkWindowSize Unsigned32
  mscAppnDnaAccountClass Unsigned32
  mscAppnDnaAccountCollection OCTET STRING
  mscAppnDnaServiceExchange Unsigned32

MscAppnDnaHgMRowStatusEntry  
SEQUENCE    
  mscAppnDnaHgMRowStatus RowStatus
  mscAppnDnaHgMComponentName DisplayString
  mscAppnDnaHgMStorageType StorageType
  mscAppnDnaHgMIndex NonReplicated

MscAppnDnaHgMIfEntry  
SEQUENCE    
  mscAppnDnaHgMAvailabilityUpdateThreshold Unsigned32

MscAppnDnaHgMOpEntry  
SEQUENCE    
  mscAppnDnaHgMMaxAvailableChannels Unsigned32
  mscAppnDnaHgMAvailableChannels Unsigned32
  mscAppnDnaHgMAvailabilityDelta INTEGER

MscAppnDnaHgMHgAddrRowStatusEntry  
SEQUENCE    
  mscAppnDnaHgMHgAddrRowStatus RowStatus
  mscAppnDnaHgMHgAddrComponentName DisplayString
  mscAppnDnaHgMHgAddrStorageType StorageType
  mscAppnDnaHgMHgAddrIndex Integer32

MscAppnDnaHgMHgAddrAddrEntry  
SEQUENCE    
  mscAppnDnaHgMHgAddrNumberingPlanIndicator INTEGER
  mscAppnDnaHgMHgAddrDataNetworkAddress DigitString

MscAppnDnaCugRowStatusEntry  
SEQUENCE    
  mscAppnDnaCugRowStatus RowStatus
  mscAppnDnaCugComponentName DisplayString
  mscAppnDnaCugStorageType StorageType
  mscAppnDnaCugIndex Integer32

MscAppnDnaCugCugOptionsEntry  
SEQUENCE    
  mscAppnDnaCugType INTEGER
  mscAppnDnaCugDnic DigitString
  mscAppnDnaCugInterlockCode Unsigned32
  mscAppnDnaCugPreferential INTEGER
  mscAppnDnaCugOutCalls INTEGER
  mscAppnDnaCugIncCalls INTEGER
  mscAppnDnaCugPrivileged INTEGER

MscAppnDlciRowStatusEntry  
SEQUENCE    
  mscAppnDlciRowStatus RowStatus
  mscAppnDlciComponentName DisplayString
  mscAppnDlciStorageType StorageType
  mscAppnDlciIndex Integer32

MscAppnDlciStateEntry  
SEQUENCE    
  mscAppnDlciAdminState INTEGER
  mscAppnDlciOperationalState INTEGER
  mscAppnDlciUsageState INTEGER

MscAppnDlciSpOpEntry  
SEQUENCE    
  mscAppnDlciRateEnforcement INTEGER
  mscAppnDlciCommittedInformationRate Gauge32
  mscAppnDlciCommittedBurstSize Gauge32
  mscAppnDlciExcessInformationRate Gauge32
  mscAppnDlciExcessBurstSize Gauge32
  mscAppnDlciMeasurementInterval Gauge32

MscAppnDlciDcRowStatusEntry  
SEQUENCE    
  mscAppnDlciDcRowStatus RowStatus
  mscAppnDlciDcComponentName DisplayString
  mscAppnDlciDcStorageType StorageType
  mscAppnDlciDcIndex NonReplicated

MscAppnDlciDcOptionsEntry  
SEQUENCE    
  mscAppnDlciDcRemoteNpi INTEGER
  mscAppnDlciDcRemoteDna DigitString
  mscAppnDlciDcRemoteDlci Unsigned32
  mscAppnDlciDcType INTEGER
  mscAppnDlciDcTransferPriority INTEGER
  mscAppnDlciDcDiscardPriority INTEGER

MscAppnDlciDcNfaEntry  
SEQUENCE    
  mscAppnDlciDcNfaIndex Integer32
  mscAppnDlciDcNfaValue HexString
  mscAppnDlciDcNfaRowStatus RowStatus

MscAppnDlciVcRowStatusEntry  
SEQUENCE    
  mscAppnDlciVcRowStatus RowStatus
  mscAppnDlciVcComponentName DisplayString
  mscAppnDlciVcStorageType StorageType
  mscAppnDlciVcIndex NonReplicated

MscAppnDlciVcCadEntry  
SEQUENCE    
  mscAppnDlciVcType INTEGER
  mscAppnDlciVcState INTEGER
  mscAppnDlciVcPreviousState INTEGER
  mscAppnDlciVcDiagnosticCode Unsigned32
  mscAppnDlciVcPreviousDiagnosticCode Unsigned32
  mscAppnDlciVcCalledNpi INTEGER
  mscAppnDlciVcCalledDna DigitString
  mscAppnDlciVcCalledLcn Unsigned32
  mscAppnDlciVcCallingNpi INTEGER
  mscAppnDlciVcCallingDna DigitString
  mscAppnDlciVcCallingLcn Unsigned32
  mscAppnDlciVcAccountingEnabled INTEGER
  mscAppnDlciVcFastSelectCall INTEGER
  mscAppnDlciVcPathReliability INTEGER
  mscAppnDlciVcAccountingEnd INTEGER
  mscAppnDlciVcPriority INTEGER
  mscAppnDlciVcSegmentSize Unsigned32
  mscAppnDlciVcMaxSubnetPktSize Unsigned32
  mscAppnDlciVcRcosToNetwork INTEGER
  mscAppnDlciVcRcosFromNetwork INTEGER
  mscAppnDlciVcEmissionPriorityToNetwork INTEGER
  mscAppnDlciVcEmissionPriorityFromNetwork INTEGER
  mscAppnDlciVcDataPath AsciiString

MscAppnDlciVcIntdEntry  
SEQUENCE    
  mscAppnDlciVcCallReferenceNumber Hex
  mscAppnDlciVcElapsedTimeTillNow Unsigned32
  mscAppnDlciVcSegmentsRx Unsigned32
  mscAppnDlciVcSegmentsSent Unsigned32
  mscAppnDlciVcStartTime EnterpriseDateAndTime

MscAppnDlciVcFrdEntry  
SEQUENCE    
  mscAppnDlciVcFrmCongestedToSubnet Unsigned32
  mscAppnDlciVcCannotForwardToSubnet Unsigned32
  mscAppnDlciVcNotDataXferToSubnet Unsigned32
  mscAppnDlciVcOutOfRangeFrmFromSubnet Unsigned32
  mscAppnDlciVcCombErrorsFromSubnet Unsigned32
  mscAppnDlciVcDuplicatesFromSubnet Unsigned32
  mscAppnDlciVcNotDataXferFromSubnet Unsigned32
  mscAppnDlciVcFrmLossTimeouts Unsigned32
  mscAppnDlciVcOoSeqByteCntExceeded Unsigned32
  mscAppnDlciVcPeakOoSeqPktCount Unsigned32
  mscAppnDlciVcPeakOoSeqFrmForwarded Unsigned32
  mscAppnDlciVcSendSequenceNumber Unsigned32
  mscAppnDlciVcPktRetryTimeouts Unsigned32
  mscAppnDlciVcPeakRetryQueueSize Unsigned32
  mscAppnDlciVcSubnetRecoveries Unsigned32
  mscAppnDlciVcOoSeqPktCntExceeded Unsigned32
  mscAppnDlciVcPeakOoSeqByteCount Unsigned32

MscAppnDlciVcDmepEntry  
SEQUENCE    
  mscAppnDlciVcDmepValue RowPointer

MscAppnDlciBnnLsDefRowStatusEntry  
SEQUENCE    
  mscAppnDlciBnnLsDefRowStatus RowStatus
  mscAppnDlciBnnLsDefComponentName DisplayString
  mscAppnDlciBnnLsDefStorageType StorageType
  mscAppnDlciBnnLsDefIndex Integer32

MscAppnDlciBnnLsDefProvEntry  
SEQUENCE    
  mscAppnDlciBnnLsDefDspuService INTEGER
  mscAppnDlciBnnLsDefAdjacentCpName AsciiString
  mscAppnDlciBnnLsDefAdjacentCpType INTEGER
  mscAppnDlciBnnLsDefTgNum Unsigned32
  mscAppnDlciBnnLsDefDlusName AsciiString
  mscAppnDlciBnnLsDefBackupDlusName AsciiString
  mscAppnDlciBnnLsDefHprSupported INTEGER
  mscAppnDlciBnnLsDefAdjacentNodeID Hex
  mscAppnDlciBnnLsDefCpCpSessionSupport INTEGER
  mscAppnDlciBnnLsDefMaxTxBtuSize Unsigned32
  mscAppnDlciBnnLsDefLsRole INTEGER

MscAppnDlciSpRowStatusEntry  
SEQUENCE    
  mscAppnDlciSpRowStatus RowStatus
  mscAppnDlciSpComponentName DisplayString
  mscAppnDlciSpStorageType StorageType
  mscAppnDlciSpIndex NonReplicated

MscAppnDlciSpParmsEntry  
SEQUENCE    
  mscAppnDlciSpRateEnforcement INTEGER
  mscAppnDlciSpCommittedInformationRate Unsigned32
  mscAppnDlciSpCommittedBurstSize Unsigned32
  mscAppnDlciSpExcessBurstSize Unsigned32
  mscAppnDlciSpMeasurementInterval Unsigned32

MscAppnDlciBanLsDefRowStatusEntry  
SEQUENCE    
  mscAppnDlciBanLsDefRowStatus RowStatus
  mscAppnDlciBanLsDefComponentName DisplayString
  mscAppnDlciBanLsDefStorageType StorageType
  mscAppnDlciBanLsDefMacIndex DashedHexString
  mscAppnDlciBanLsDefSapIndex Integer32

MscAppnDlciBanLsDefProvEntry  
SEQUENCE    
  mscAppnDlciBanLsDefDspuService INTEGER
  mscAppnDlciBanLsDefAdjacentCpName AsciiString
  mscAppnDlciBanLsDefAdjacentCpType INTEGER
  mscAppnDlciBanLsDefTgNum Unsigned32
  mscAppnDlciBanLsDefDlusName AsciiString
  mscAppnDlciBanLsDefBackupDlusName AsciiString
  mscAppnDlciBanLsDefHprSupported INTEGER
  mscAppnDlciBanLsDefAdjacentNodeID Hex
  mscAppnDlciBanLsDefCpCpSessionSupport INTEGER
  mscAppnDlciBanLsDefMaxTxBtuSize Unsigned32
  mscAppnDlciBanLsDefLsRole INTEGER

MscAppnDlciBanRowStatusEntry  
SEQUENCE    
  mscAppnDlciBanRowStatus RowStatus
  mscAppnDlciBanComponentName DisplayString
  mscAppnDlciBanStorageType StorageType
  mscAppnDlciBanIndex NonReplicated

MscAppnDlciBanProvEntry  
SEQUENCE    
  mscAppnDlciBanLocalMac DashedHexString
  mscAppnDlciBanLocalSap Hex

MscAppnLcnRowStatusEntry  
SEQUENCE    
  mscAppnLcnRowStatus RowStatus
  mscAppnLcnComponentName DisplayString
  mscAppnLcnStorageType StorageType
  mscAppnLcnIndex Integer32

MscAppnLcnStateEntry  
SEQUENCE    
  mscAppnLcnAdminState INTEGER
  mscAppnLcnOperationalState INTEGER
  mscAppnLcnUsageState INTEGER

MscAppnLcnDcRowStatusEntry  
SEQUENCE    
  mscAppnLcnDcRowStatus RowStatus
  mscAppnLcnDcComponentName DisplayString
  mscAppnLcnDcStorageType StorageType
  mscAppnLcnDcIndex NonReplicated

MscAppnLcnDcOptionsEntry  
SEQUENCE    
  mscAppnLcnDcRemoteNpi INTEGER
  mscAppnLcnDcRemoteDna DigitString
  mscAppnLcnDcTransferPriority INTEGER
  mscAppnLcnDcDiscardPriority INTEGER

MscAppnLcnVcRowStatusEntry  
SEQUENCE    
  mscAppnLcnVcRowStatus RowStatus
  mscAppnLcnVcComponentName DisplayString
  mscAppnLcnVcStorageType StorageType
  mscAppnLcnVcIndex NonReplicated

MscAppnLcnVcCadEntry  
SEQUENCE    
  mscAppnLcnVcType INTEGER
  mscAppnLcnVcState INTEGER
  mscAppnLcnVcPreviousState INTEGER
  mscAppnLcnVcDiagnosticCode Unsigned32
  mscAppnLcnVcPreviousDiagnosticCode Unsigned32
  mscAppnLcnVcCalledNpi INTEGER
  mscAppnLcnVcCalledDna DigitString
  mscAppnLcnVcCalledLcn Unsigned32
  mscAppnLcnVcCallingNpi INTEGER
  mscAppnLcnVcCallingDna DigitString
  mscAppnLcnVcCallingLcn Unsigned32
  mscAppnLcnVcAccountingEnabled INTEGER
  mscAppnLcnVcFastSelectCall INTEGER
  mscAppnLcnVcLocalRxPktSize INTEGER
  mscAppnLcnVcLocalTxPktSize INTEGER
  mscAppnLcnVcLocalTxWindowSize Unsigned32
  mscAppnLcnVcLocalRxWindowSize Unsigned32
  mscAppnLcnVcPathReliability INTEGER
  mscAppnLcnVcAccountingEnd INTEGER
  mscAppnLcnVcPriority INTEGER
  mscAppnLcnVcSegmentSize Unsigned32
  mscAppnLcnVcSubnetTxPktSize INTEGER
  mscAppnLcnVcSubnetTxWindowSize Unsigned32
  mscAppnLcnVcSubnetRxPktSize INTEGER
  mscAppnLcnVcSubnetRxWindowSize Unsigned32
  mscAppnLcnVcMaxSubnetPktSize Unsigned32
  mscAppnLcnVcTransferPriorityToNetwork INTEGER
  mscAppnLcnVcTransferPriorityFromNetwork INTEGER

MscAppnLcnVcIntdEntry  
SEQUENCE    
  mscAppnLcnVcCallReferenceNumber Hex
  mscAppnLcnVcElapsedTimeTillNow Unsigned32
  mscAppnLcnVcSegmentsRx Unsigned32
  mscAppnLcnVcSegmentsSent Unsigned32
  mscAppnLcnVcStartTime EnterpriseDateAndTime

MscAppnLcnVcStatsEntry  
SEQUENCE    
  mscAppnLcnVcAckStackingTimeouts Unsigned32
  mscAppnLcnVcOutOfRangeFrmFromSubnet Unsigned32
  mscAppnLcnVcDuplicatesFromSubnet Unsigned32
  mscAppnLcnVcFrmRetryTimeouts Unsigned32
  mscAppnLcnVcPeakRetryQueueSize Unsigned32
  mscAppnLcnVcPeakOoSeqQueueSize Unsigned32
  mscAppnLcnVcPeakOoSeqFrmForwarded Unsigned32
  mscAppnLcnVcPeakStackedAcksRx Unsigned32
  mscAppnLcnVcSubnetRecoveries Unsigned32
  mscAppnLcnVcWindowClosuresToSubnet Unsigned32
  mscAppnLcnVcWindowClosuresFromSubnet Unsigned32
  mscAppnLcnVcWrTriggers Unsigned32

MscAppnPortRowStatusEntry  
SEQUENCE    
  mscAppnPortRowStatus RowStatus
  mscAppnPortComponentName DisplayString
  mscAppnPortStorageType StorageType
  mscAppnPortIndex AsciiStringIndex

MscAppnPortConfigEntry  
SEQUENCE    
  mscAppnPortType INTEGER
  mscAppnPortMaxRxBtuSize Unsigned32
  mscAppnPortMaxTxBtuSize Unsigned32
  mscAppnPortTotLinkActLim Unsigned32
  mscAppnPortInbLinkActLim Unsigned32
  mscAppnPortOutLinkActLim Unsigned32
  mscAppnPortLsRole INTEGER
  mscAppnPortActXidExchLim Unsigned32
  mscAppnPortNonactXidExchLim Unsigned32
  mscAppnPortLsXmitRxCap INTEGER
  mscAppnPortMaxIfrmRxWindow Unsigned32
  mscAppnPortTargetPacingCount Unsigned32

MscAppnPortOperEntry  
SEQUENCE    
  mscAppnPortState INTEGER
  mscAppnPortDlcType INTEGER
  mscAppnPortSimRim INTEGER
  mscAppnPortDefinedLsGoodXids PassportCounter64
  mscAppnPortDefinedLsBadXids PassportCounter64
  mscAppnPortDynLsGoodXids PassportCounter64
  mscAppnPortDynLsBadXids PassportCounter64

MscAppnPortTgCharEntry  
SEQUENCE    
  mscAppnPortEffectiveCap INTEGER
  mscAppnPortConnectCost INTEGER
  mscAppnPortByteCost INTEGER
  mscAppnPortSecurity INTEGER
  mscAppnPortPropagationDelay INTEGER
  mscAppnPortUserDefinedParm1 Unsigned32
  mscAppnPortUserDefinedParm2 Unsigned32
  mscAppnPortUserDefinedParm3 Unsigned32

MscAppnLsRowStatusEntry  
SEQUENCE    
  mscAppnLsRowStatus RowStatus
  mscAppnLsComponentName DisplayString
  mscAppnLsStorageType StorageType
  mscAppnLsIndex AsciiStringIndex

MscAppnLsLsVcReferenceEntry  
SEQUENCE    
  mscAppnLsName RowPointer
  mscAppnLsSap Hex

MscAppnLsConfigEntry  
SEQUENCE    
  mscAppnLsPortName AsciiString
  mscAppnLsFeatures OCTET STRING
  mscAppnLsMaxTxBtuSize Unsigned32

MscAppnLsOperEntry  
SEQUENCE    
  mscAppnLsDlcType INTEGER
  mscAppnLsLinkStationState INTEGER
  mscAppnLsLinkStationSubState INTEGER
  mscAppnLsActSessCount Gauge32
  mscAppnLsActualCpName AsciiString
  mscAppnLsActualCpType INTEGER
  mscAppnLsDlcName AsciiString
  mscAppnLsDynamicOrDefined INTEGER
  mscAppnLsMigration INTEGER
  mscAppnLsTgNum Unsigned32
  mscAppnLsHprSupport INTEGER
  mscAppnLsAnrLabel Hex

MscAppnLsTgCharEntry  
SEQUENCE    
  mscAppnLsEffectiveCap INTEGER
  mscAppnLsConnectCost INTEGER
  mscAppnLsByteCost INTEGER
  mscAppnLsSecurity INTEGER
  mscAppnLsPropagationDelay INTEGER
  mscAppnLsUserDefinedParm1 Unsigned32
  mscAppnLsUserDefinedParm2 Unsigned32
  mscAppnLsUserDefinedParm3 Unsigned32

MscAppnLsStatsEntry  
SEQUENCE    
  mscAppnLsInXidBytes PassportCounter64
  mscAppnLsInMsgBytes PassportCounter64
  mscAppnLsInXidFrames PassportCounter64
  mscAppnLsInMsgFrames PassportCounter64
  mscAppnLsOutXidBytes PassportCounter64
  mscAppnLsOutMsgBytes PassportCounter64
  mscAppnLsOutXidFrames PassportCounter64
  mscAppnLsOutMsgFrames PassportCounter64
  mscAppnLsInInvalidSnaFrames PassportCounter64
  mscAppnLsInSessionControlFrames PassportCounter64
  mscAppnLsOutSessionControlFrames PassportCounter64
  mscAppnLsEchoResponse PassportCounter64
  mscAppnLsCurrentDelay PassportCounter64
  mscAppnLsMaxDelay PassportCounter64
  mscAppnLsMinDelay PassportCounter64
  mscAppnLsGoodXids PassportCounter64
  mscAppnLsBadXids PassportCounter64

MscAppnDirEntRowStatusEntry  
SEQUENCE    
  mscAppnDirEntRowStatus RowStatus
  mscAppnDirEntComponentName DisplayString
  mscAppnDirEntStorageType StorageType
  mscAppnDirEntIndex AsciiStringIndex

MscAppnDirEntOperEntry  
SEQUENCE    
  mscAppnDirEntServerName AsciiString
  mscAppnDirEntLuOwnerName AsciiString
  mscAppnDirEntLocation INTEGER
  mscAppnDirEntEntryType INTEGER
  mscAppnDirEntWildCard INTEGER

MscAppnAdjNnRowStatusEntry  
SEQUENCE    
  mscAppnAdjNnRowStatus RowStatus
  mscAppnAdjNnComponentName DisplayString
  mscAppnAdjNnStorageType StorageType
  mscAppnAdjNnIndex AsciiStringIndex

MscAppnAdjNnOperEntry  
SEQUENCE    
  mscAppnAdjNnCpCpSessStatus INTEGER
  mscAppnAdjNnOutOfSeqTdus PassportCounter64
  mscAppnAdjNnLastFrsnSent Unsigned32
  mscAppnAdjNnLastFrsnReceived Unsigned32

MscAppnNnRowStatusEntry  
SEQUENCE    
  mscAppnNnRowStatus RowStatus
  mscAppnNnComponentName DisplayString
  mscAppnNnStorageType StorageType
  mscAppnNnIndex AsciiStringIndex

MscAppnNnOperEntry  
SEQUENCE    
  mscAppnNnDaysLeft Unsigned32
  mscAppnNnNodeType INTEGER
  mscAppnNnResourceSequenceNumber Unsigned32
  mscAppnNnRouteAdditionResistance INTEGER
  mscAppnNnStatus OCTET STRING
  mscAppnNnFunctionSupported OCTET STRING

MscAppnLocTgRowStatusEntry  
SEQUENCE    
  mscAppnLocTgRowStatus RowStatus
  mscAppnLocTgComponentName DisplayString
  mscAppnLocTgStorageType StorageType
  mscAppnLocTgDestFqcpNameIndex AsciiStringIndex
  mscAppnLocTgTransmissionGroupIndex Integer32

MscAppnLocTgOperEntry  
SEQUENCE    
  mscAppnLocTgStatus OCTET STRING
  mscAppnLocTgResourceSequenceNumber Unsigned32

MscAppnLocTgLinkAddressEntry  
SEQUENCE    
  mscAppnLocTgDlcData HexString

MscAppnLocTgTgCharEntry  
SEQUENCE    
  mscAppnLocTgEffectiveCap INTEGER
  mscAppnLocTgConnectCost INTEGER
  mscAppnLocTgByteCost INTEGER
  mscAppnLocTgSecurity INTEGER
  mscAppnLocTgPropagationDelay INTEGER
  mscAppnLocTgUserDefinedParm1 Unsigned32
  mscAppnLocTgUserDefinedParm2 Unsigned32
  mscAppnLocTgUserDefinedParm3 Unsigned32

MscAppnIsrSessRowStatusEntry  
SEQUENCE    
  mscAppnIsrSessRowStatus RowStatus
  mscAppnIsrSessComponentName DisplayString
  mscAppnIsrSessStorageType StorageType
  mscAppnIsrSessFqcpNameIndex AsciiStringIndex
  mscAppnIsrSessProcedureCorrelationIdIndex HexString

MscAppnIsrSessOperEntry  
SEQUENCE    
  mscAppnIsrSessTransmissionPriority INTEGER
  mscAppnIsrSessCosName AsciiString
  mscAppnIsrSessLimitedResource INTEGER

MscAppnIsrSessPriStatsRowStatusEntry  
SEQUENCE    
  mscAppnIsrSessPriStatsRowStatus RowStatus
  mscAppnIsrSessPriStatsComponentName DisplayString
  mscAppnIsrSessPriStatsStorageType StorageType
  mscAppnIsrSessPriStatsIndex NonReplicated

MscAppnIsrSessPriStatsStatsEntry  
SEQUENCE    
  mscAppnIsrSessPriStatsRxRuSize Unsigned32
  mscAppnIsrSessPriStatsMaxTxBtuSize Unsigned32
  mscAppnIsrSessPriStatsMaxRxBtuSize Unsigned32
  mscAppnIsrSessPriStatsMaxTxPacWin INTEGER
  mscAppnIsrSessPriStatsCurTxPacWin INTEGER
  mscAppnIsrSessPriStatsMaxRxPacWin INTEGER
  mscAppnIsrSessPriStatsCurRxPacWin INTEGER
  mscAppnIsrSessPriStatsTxDataframes PassportCounter64
  mscAppnIsrSessPriStatsTxFmdFrames PassportCounter64
  mscAppnIsrSessPriStatsTxDataBytes PassportCounter64
  mscAppnIsrSessPriStatsRxDataFrames PassportCounter64
  mscAppnIsrSessPriStatsRxFmdFrames PassportCounter64
  mscAppnIsrSessPriStatsRxDataBytes PassportCounter64
  mscAppnIsrSessPriStatsSidh Hex
  mscAppnIsrSessPriStatsSidl Hex
  mscAppnIsrSessPriStatsOdai INTEGER
  mscAppnIsrSessPriStatsLsName AsciiString

MscAppnIsrSessSecStatsRowStatusEntry  
SEQUENCE    
  mscAppnIsrSessSecStatsRowStatus RowStatus
  mscAppnIsrSessSecStatsComponentName DisplayString
  mscAppnIsrSessSecStatsStorageType StorageType
  mscAppnIsrSessSecStatsIndex NonReplicated

MscAppnIsrSessSecStatsStatsEntry  
SEQUENCE    
  mscAppnIsrSessSecStatsRxRuSize Unsigned32
  mscAppnIsrSessSecStatsMaxTxBtuSize Unsigned32
  mscAppnIsrSessSecStatsMaxRxBtuSize Unsigned32
  mscAppnIsrSessSecStatsMaxTxPacWin INTEGER
  mscAppnIsrSessSecStatsCurTxPacWin INTEGER
  mscAppnIsrSessSecStatsMaxRxPacWin INTEGER
  mscAppnIsrSessSecStatsCurRxPacWin INTEGER
  mscAppnIsrSessSecStatsTxDataframes PassportCounter64
  mscAppnIsrSessSecStatsTxFmdFrames PassportCounter64
  mscAppnIsrSessSecStatsTxDataBytes PassportCounter64
  mscAppnIsrSessSecStatsRxDataFrames PassportCounter64
  mscAppnIsrSessSecStatsRxFmdFrames PassportCounter64
  mscAppnIsrSessSecStatsRxDataBytes PassportCounter64
  mscAppnIsrSessSecStatsSidh Hex
  mscAppnIsrSessSecStatsSidl Hex
  mscAppnIsrSessSecStatsOdai INTEGER
  mscAppnIsrSessSecStatsLsName AsciiString

MscAppnNnTgRowStatusEntry  
SEQUENCE    
  mscAppnNnTgRowStatus RowStatus
  mscAppnNnTgComponentName DisplayString
  mscAppnNnTgStorageType StorageType
  mscAppnNnTgOwnerFqcpNameIndex AsciiStringIndex
  mscAppnNnTgDestFqcpNameIndex AsciiStringIndex
  mscAppnNnTgTransmissionGroupIndex Integer32

MscAppnNnTgOperEntry  
SEQUENCE    
  mscAppnNnTgFlowReductionSequenceNumber Unsigned32
  mscAppnNnTgDaysLeft Unsigned32
  mscAppnNnTgResourceSequenceNumber Unsigned32
  mscAppnNnTgStatus OCTET STRING

MscAppnNnTgLinkAddressEntry  
SEQUENCE    
  mscAppnNnTgDlcData HexString

MscAppnNnTgTgCharEntry  
SEQUENCE    
  mscAppnNnTgEffectiveCap INTEGER
  mscAppnNnTgConnectCost INTEGER
  mscAppnNnTgByteCost INTEGER
  mscAppnNnTgSecurity INTEGER
  mscAppnNnTgPropagationDelay INTEGER
  mscAppnNnTgUserDefinedParm1 Unsigned32
  mscAppnNnTgUserDefinedParm2 Unsigned32
  mscAppnNnTgUserDefinedParm3 Unsigned32

MscAppnRtpRowStatusEntry  
SEQUENCE    
  mscAppnRtpRowStatus RowStatus
  mscAppnRtpComponentName DisplayString
  mscAppnRtpStorageType StorageType
  mscAppnRtpIndex AsciiStringIndex

MscAppnRtpOperEntry  
SEQUENCE    
  mscAppnRtpLocalLsName AsciiString
  mscAppnRtpRemoteCpName AsciiString
  mscAppnRtpCosName AsciiString
  mscAppnRtpActiveSessions INTEGER
  mscAppnRtpLocalTcid HexString
  mscAppnRtpRemoteTcid HexString
  mscAppnRtpIdleTimer Unsigned32
  mscAppnRtpMaxBtuSize INTEGER

MscAppnRtpStatsEntry  
SEQUENCE    
  mscAppnRtpTxBytes PassportCounter64
  mscAppnRtpRxBytes PassportCounter64
  mscAppnRtpBytesResent PassportCounter64
  mscAppnRtpBytesDiscarded PassportCounter64
  mscAppnRtpPktTx PassportCounter64
  mscAppnRtpPktRx PassportCounter64
  mscAppnRtpPktResent PassportCounter64
  mscAppnRtpPktDiscard PassportCounter64
  mscAppnRtpLostFrames PassportCounter64
  mscAppnRtpCurTxRate Gauge32
  mscAppnRtpMaxTxRate Gauge32
  mscAppnRtpMinTxRate Gauge32
  mscAppnRtpCurRxRate Gauge32
  mscAppnRtpMaxRxRate Gauge32
  mscAppnRtpMinRxRate Gauge32
  mscAppnRtpBurstSize Gauge32
  mscAppnRtpUptime TimeTicks
  mscAppnRtpSmoothRoundTripTime Gauge32
  mscAppnRtpLastRoundTripTime Gauge32
  mscAppnRtpShortReqTimer Gauge32
  mscAppnRtpShortReqTimeouts PassportCounter64
  mscAppnRtpIdleTimeouts PassportCounter64
  mscAppnRtpRxInvalidSnaFrames PassportCounter64
  mscAppnRtpInSessionControlFrames PassportCounter64
  mscAppnRtpOutSessionControlFrames PassportCounter64

MscAppnDluRowStatusEntry  
SEQUENCE    
  mscAppnDluRowStatus RowStatus
  mscAppnDluComponentName DisplayString
  mscAppnDluStorageType StorageType
  mscAppnDluIndex AsciiStringIndex

MscAppnDluOperEntry  
SEQUENCE    
  mscAppnDluSscpSessActive INTEGER
  mscAppnDluPluSessActive INTEGER
  mscAppnDluDlusName AsciiString
  mscAppnDluPluName AsciiString
  mscAppnDluNauAddress INTEGER

MscAppnDluSscpRowStatusEntry  
SEQUENCE    
  mscAppnDluSscpRowStatus RowStatus
  mscAppnDluSscpComponentName DisplayString
  mscAppnDluSscpStorageType StorageType
  mscAppnDluSscpIndex NonReplicated

MscAppnDluSscpStatsEntry  
SEQUENCE    
  mscAppnDluSscpRxRuSize Unsigned32
  mscAppnDluSscpMaxTxBtuSize Unsigned32
  mscAppnDluSscpMaxRxBtuSize Unsigned32
  mscAppnDluSscpMaxTxPacWin INTEGER
  mscAppnDluSscpCurTxPacWin INTEGER
  mscAppnDluSscpMaxRxPacWin INTEGER
  mscAppnDluSscpCurRxPacWin INTEGER
  mscAppnDluSscpTxDataframes PassportCounter64
  mscAppnDluSscpTxFmdFrames PassportCounter64
  mscAppnDluSscpTxDataBytes PassportCounter64
  mscAppnDluSscpRxDataFrames PassportCounter64
  mscAppnDluSscpRxFmdFrames PassportCounter64
  mscAppnDluSscpRxDataBytes PassportCounter64
  mscAppnDluSscpSidh Hex
  mscAppnDluSscpSidl Hex
  mscAppnDluSscpOdai INTEGER
  mscAppnDluSscpLsName AsciiString

MscAppnDluUsStatRowStatusEntry  
SEQUENCE    
  mscAppnDluUsStatRowStatus RowStatus
  mscAppnDluUsStatComponentName DisplayString
  mscAppnDluUsStatStorageType StorageType
  mscAppnDluUsStatIndex NonReplicated

MscAppnDluUsStatStatsEntry  
SEQUENCE    
  mscAppnDluUsStatRxRuSize Unsigned32
  mscAppnDluUsStatMaxTxBtuSize Unsigned32
  mscAppnDluUsStatMaxRxBtuSize Unsigned32
  mscAppnDluUsStatMaxTxPacWin INTEGER
  mscAppnDluUsStatCurTxPacWin INTEGER
  mscAppnDluUsStatMaxRxPacWin INTEGER
  mscAppnDluUsStatCurRxPacWin INTEGER
  mscAppnDluUsStatTxDataframes PassportCounter64
  mscAppnDluUsStatTxFmdFrames PassportCounter64
  mscAppnDluUsStatTxDataBytes PassportCounter64
  mscAppnDluUsStatRxDataFrames PassportCounter64
  mscAppnDluUsStatRxFmdFrames PassportCounter64
  mscAppnDluUsStatRxDataBytes PassportCounter64
  mscAppnDluUsStatSidh Hex
  mscAppnDluUsStatSidl Hex
  mscAppnDluUsStatOdai INTEGER
  mscAppnDluUsStatLsName AsciiString

MscAppnDluDsStatRowStatusEntry  
SEQUENCE    
  mscAppnDluDsStatRowStatus RowStatus
  mscAppnDluDsStatComponentName DisplayString
  mscAppnDluDsStatStorageType StorageType
  mscAppnDluDsStatIndex NonReplicated

MscAppnDluDsStatStatsEntry  
SEQUENCE    
  mscAppnDluDsStatRxRuSize Unsigned32
  mscAppnDluDsStatMaxTxBtuSize Unsigned32
  mscAppnDluDsStatMaxRxBtuSize Unsigned32
  mscAppnDluDsStatMaxTxPacWin INTEGER
  mscAppnDluDsStatCurTxPacWin INTEGER
  mscAppnDluDsStatMaxRxPacWin INTEGER
  mscAppnDluDsStatCurRxPacWin INTEGER
  mscAppnDluDsStatTxDataframes PassportCounter64
  mscAppnDluDsStatTxFmdFrames PassportCounter64
  mscAppnDluDsStatTxDataBytes PassportCounter64
  mscAppnDluDsStatRxDataFrames PassportCounter64
  mscAppnDluDsStatRxFmdFrames PassportCounter64
  mscAppnDluDsStatRxDataBytes PassportCounter64
  mscAppnDluDsStatSidh Hex
  mscAppnDluDsStatSidl Hex
  mscAppnDluDsStatOdai INTEGER
  mscAppnDluDsStatLsName AsciiString

MscAppnDlusRowStatusEntry  
SEQUENCE    
  mscAppnDlusRowStatus RowStatus
  mscAppnDlusComponentName DisplayString
  mscAppnDlusStorageType StorageType
  mscAppnDlusIndex AsciiStringIndex

MscAppnDlusOperEntry  
SEQUENCE    
  mscAppnDlusPrimaryDlus INTEGER
  mscAppnDlusPipeState INTEGER
  mscAppnDlusActivePUs Gauge32

MscAppnDlusDlusStatEntry  
SEQUENCE    
  mscAppnDlusReqActPuTx PassportCounter64
  mscAppnDlusReqActPuRspRx PassportCounter64
  mscAppnDlusActPuRx PassportCounter64
  mscAppnDlusActPuRspTx PassportCounter64
  mscAppnDlusReqDactPuTx PassportCounter64
  mscAppnDlusReqDactPuRspRx PassportCounter64
  mscAppnDlusDactPuRx PassportCounter64
  mscAppnDlusDactPuRspTx PassportCounter64
  mscAppnDlusActLuRx PassportCounter64
  mscAppnDlusActLuRspTx PassportCounter64
  mscAppnDlusDactLuRx PassportCounter64
  mscAppnDlusDactLuRspTx PassportCounter64
  mscAppnDlusSscpPuMuRx PassportCounter64
  mscAppnDlusSscpPuMuTx PassportCounter64
  mscAppnDlusSscpLuMuRx PassportCounter64
  mscAppnDlusSscpLuMuTx PassportCounter64

MscAppnDLURRowStatusEntry  
SEQUENCE    
  mscAppnDLURRowStatus RowStatus
  mscAppnDLURComponentName DisplayString
  mscAppnDLURStorageType StorageType
  mscAppnDLURIndex NonReplicated

MscAppnDLURDlurParmsEntry  
SEQUENCE    
  mscAppnDLURPrimaryDefDlusName AsciiString
  mscAppnDLURSecondaryDefDlusName AsciiString
  mscAppnDLURDlusRetryTimeout Unsigned32
  mscAppnDLURDlusRetryLimit Unsigned32

MscAppnCosRowStatusEntry  
SEQUENCE    
  mscAppnCosRowStatus RowStatus
  mscAppnCosComponentName DisplayString
  mscAppnCosStorageType StorageType
  mscAppnCosIndex AsciiStringIndex

MscAppnCosProvEntry  
SEQUENCE    
  mscAppnCosTransmissionPriority INTEGER

MscAppnCosTgRowStatusEntry  
SEQUENCE    
  mscAppnCosTgRowStatus RowStatus
  mscAppnCosTgComponentName DisplayString
  mscAppnCosTgStorageType StorageType
  mscAppnCosTgIndex Integer32

MscAppnCosTgProvEntry  
SEQUENCE    
  mscAppnCosTgMinEffectiveCapacity INTEGER
  mscAppnCosTgMaxEffectiveCapacity INTEGER
  mscAppnCosTgMinConnectCost INTEGER
  mscAppnCosTgMaxConnectCost INTEGER
  mscAppnCosTgMinByteCost INTEGER
  mscAppnCosTgMaxByteCost INTEGER
  mscAppnCosTgMinSecurity INTEGER
  mscAppnCosTgMaxSecurity INTEGER
  mscAppnCosTgMinPropDelay INTEGER
  mscAppnCosTgMaxPropDelay INTEGER
  mscAppnCosTgMinModemClass INTEGER
  mscAppnCosTgMaxModemClass INTEGER
  mscAppnCosTgMinUserDefParm1 INTEGER
  mscAppnCosTgMaxUserDefParm1 INTEGER
  mscAppnCosTgMinUserDefParm2 INTEGER
  mscAppnCosTgMaxUserDefParm2 INTEGER
  mscAppnCosTgMinUserDefParm3 INTEGER
  mscAppnCosTgMaxUserDefParm3 INTEGER

MscAppnCosNodeRowStatusEntry  
SEQUENCE    
  mscAppnCosNodeRowStatus RowStatus
  mscAppnCosNodeComponentName DisplayString
  mscAppnCosNodeStorageType StorageType
  mscAppnCosNodeIndex Integer32

MscAppnCosNodeProvEntry  
SEQUENCE    
  mscAppnCosNodeMinRouteAddResistance INTEGER
  mscAppnCosNodeMaxRouteAddResistance INTEGER
  mscAppnCosNodeMinStatus INTEGER
  mscAppnCosNodeMaxStatus INTEGER

MscAppnFrSvcRowStatusEntry  
SEQUENCE    
  mscAppnFrSvcRowStatus RowStatus
  mscAppnFrSvcComponentName DisplayString
  mscAppnFrSvcStorageType StorageType
  mscAppnFrSvcIndex NonReplicated

MscAppnFrSvcBanEntry  
SEQUENCE    
  mscAppnFrSvcBanLocalMac DashedHexString
  mscAppnFrSvcBanLocalSap Hex

MscAppnFrSvcProvisionedEntry  
SEQUENCE    
  mscAppnFrSvcMaximumFrameRelaySvcs Unsigned32
  mscAppnFrSvcRateEnforcement INTEGER
  mscAppnFrSvcMaximumCir Unsigned32

MscAppnFrSvcOperationalEntry  
SEQUENCE    
  mscAppnFrSvcCurrentNumberOfSvcCalls Gauge32

Defined Values

appnMIB 1.3.6.1.4.1.562.36.2.2.29
OBJECT IDENTIFIER    

mscAppn 1.3.6.1.4.1.562.36.2.1.110
OBJECT IDENTIFIER    

mscAppnRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.1
This entry controls the addition and deletion of mscAppn components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnRowStatusEntry

mscAppnRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.1.1
A single entry in the table represents a single mscAppn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnRowStatusEntry  

mscAppnRowStatus 1.3.6.1.4.1.562.36.2.1.110.1.1.1
This variable is used as the basis for SNMP naming of mscAppn components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnComponentName 1.3.6.1.4.1.562.36.2.1.110.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnStorageType 1.3.6.1.4.1.562.36.2.1.110.1.1.4
This variable represents the storage type value for the mscAppn tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnIndex 1.3.6.1.4.1.562.36.2.1.110.1.1.10
This variable represents the index for the mscAppn tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..17)  

mscAppnProcessParmsTable 1.3.6.1.4.1.562.36.2.1.110.100
This group contains attributes of the SNA service which are required for operation within the Passport environment.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnProcessParmsEntry

mscAppnProcessParmsEntry 1.3.6.1.4.1.562.36.2.1.110.100.1
An entry in the mscAppnProcessParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnProcessParmsEntry  

mscAppnLogicalProcessor 1.3.6.1.4.1.562.36.2.1.110.100.1.1
This attribute specifies the logical processor on which the Appn component will utilize memory and CPU resources.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

mscAppnMaximumSvcs 1.3.6.1.4.1.562.36.2.1.110.100.1.22
This attribute specifies the total number of general switched virtual circuits (GSVC) that can be active on this Appn node. Once this number is reached no GSVC calls will be accepted by the service. This attribute does not include the Frame Relay switched virtual circuits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4096  

mscAppnMaximumLinkStations 1.3.6.1.4.1.562.36.2.1.110.100.1.23
This attribute specifies the total number of link stations for GSVCs, Frame Relay PVCs and SVCs that can be active on this Appn node. Once the value of activeLinkStations reaches or exceeds the value of maximumLinkStations, no new incoming SVC calls (GSVCs and Frame Relay SVCs) will be accepted by the service until the value of activeLinkStations is again below the value of maximumLinkStations. Outgoing GSVCs and Frame Relay PVCs (incoming or outgoing) are provisioned and their call setups at this end are not affected when the value of activeLinkStations reaches or exceeds the value of maximumLinkStations. Link stations are dynamically created for the end user applications as required. Therefore the value of activeLinkStations may exceed the value of maximumLinkStations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4096  

mscAppnControlPointCreateParmsTable 1.3.6.1.4.1.562.36.2.1.110.101
Parameters required to define the behavior of the SNA node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnControlPointCreateParmsEntry

mscAppnControlPointCreateParmsEntry 1.3.6.1.4.1.562.36.2.1.110.101.1
An entry in the mscAppnControlPointCreateParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnControlPointCreateParmsEntry  

mscAppnFqCpName 1.3.6.1.4.1.562.36.2.1.110.101.1.1
The network qualified control point (CP) name. This is the name by which the node is identified within the APPN network. It is signalled on the XID 3 exchange and is the end-point of CP-CP sessions established with this node. The first portion of this name, up to the period, is the network identifier for the network to which this node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(3..17)  

mscAppnBlockNumber 1.3.6.1.4.1.562.36.2.1.110.101.1.3
The block number identifies the product of the node. It is the first three hexadecimal digits of the SNA node id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..4095  

mscAppnIdNumber 1.3.6.1.4.1.562.36.2.1.110.101.1.4
The idNumber is used to identify the local SNA node. It is the last five hexadecimal digits of the SNA node id and is administratively defined. The idNumber will be combined with the three hexadecimal digit block number to form the SNA node id. The SNA node id is included in APPN alerts and in XIDs. A unique value is required for connections to SNA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..1048575  

mscAppnRouteAdditionResistance 1.3.6.1.4.1.562.36.2.1.110.101.1.5
Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic.The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnFeatures 1.3.6.1.4.1.562.36.2.1.110.101.1.6
This attribute supports several YES/NO flags which are defined in the create parameters: multipleDomainSupport If present, specifies that Management Services (MS) supports Multiple Domain Support (MDS) and MS capabilities exchange. registerWithCDS If present, for a network node this specifies whether local and domain resources may be registered with a central directory server. storeEndptRscvs If present, specifies that route selection control vectors (RSCV) should be stored for diagnostic purposes on sessions which terminate in this node. Note that selecting this value means that an RSCV will be stored for each ISR session. This extra storage can be up to 256 bytes per session. storeIsrRscvs If present, specifies that route selection control vectors (RSCV) should be stored for diagnostic purposes on intermediate session routing (ISR) sessions. Note that selecting this value means that an RSCV will be stored for each ISR session. This extra storage can be up to 256 bytes per session. Description of bits: multipleDomainSupport(0) registerWithCDS(1) storeEndptRscvs(2) storeIsrRscvs(3)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnMaximumLocates 1.3.6.1.4.1.562.36.2.1.110.101.1.7
This attribute represents the maximum number of locate requests the node can handle simultaneously. Attribute locateTimeout should be set to ensure that locate requests can timeout, thereby freeing up node resources.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnMaximumDirectorySize 1.3.6.1.4.1.562.36.2.1.110.101.1.8
This attribute contains the maximum number of SnaDirectoryEntry components that can be defined or learned by this node. A value of zero means unlimited.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnMdsTxAlertQueueSize 1.3.6.1.4.1.562.36.2.1.110.101.1.9
This is the size of Multiple Domain Support send alert queue. When the limit is reached, the MDS component deletes the oldest entry in the queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnTreeCacheSize 1.3.6.1.4.1.562.36.2.1.110.101.1.10
This is the topology database routing tree cache size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 8..65535  

mscAppnTreeCacheUseLimit 1.3.6.1.4.1.562.36.2.1.110.101.1.11
This is the number of times a cached tree can be reused. Once this number is exceeded, the tree is discarded and recomputed. This allows the node to balance sessions among equal weight routes. A low value provides better load balancing at the expense of increased activation latency. The minimum is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscAppnMaximumTopologyNodes 1.3.6.1.4.1.562.36.2.1.110.101.1.12
This is the maximum number of Appn network nodes that can be stored in the Topology Database (zero means unlimited).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnMaximumTopologyTgs 1.3.6.1.4.1.562.36.2.1.110.101.1.13
This is the maximum number of Transmission Groups that can be stored in the Topology Database (zero means unlimited).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnMaximumIsrSessions 1.3.6.1.4.1.562.36.2.1.110.101.1.14
This attribute represents the maximum number of ISR sessions this node can participate in at once. The minimum value is 100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 100..65535  

mscAppnIsrUpperCongestionThreshold 1.3.6.1.4.1.562.36.2.1.110.101.1.15
This is the upper threshold for ISR sessions. This attribute and the following one control the node's ISR congestion status. The node state changes from uncongested to congested if the number of ISR sessions exceeds the upper threshold. The node state changes back to uncongested once the number of ISR sessions dips below the lower threshold. To prevent thrashing, the lower threshold should be less than the upper threshold. The upper threshold should be lower than maximumIsrSessions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrLowerCongestionThreshold 1.3.6.1.4.1.562.36.2.1.110.101.1.16
This is the lower threshold for the ISR session congestion algorithm. This value should be less than isrUpperCongestionThreshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrMaxRuSize 1.3.6.1.4.1.562.36.2.1.110.101.1.17
Maximum request unit (RU) size supported for intermediate routing (ISR) sessions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrRxPacingWindow 1.3.6.1.4.1.562.36.2.1.110.101.1.18
This is the suggested receive pacing window size for intermediate sessions. This value is only used on the secondary hop of intermediate sessions if the adjacent node does not support adaptive pacing. A value of zero means that no pacing will occur.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..32767  

mscAppnLocateTimeout 1.3.6.1.4.1.562.36.2.1.110.101.1.19
This attribute specifies the time in seconds before a network search will time-out. A value of zero indicates that the search has no time limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnHprSupport 1.3.6.1.4.1.562.36.2.1.110.101.1.20
This attribute specifies the type of High Performance Routing (HPR) that is to be used on this node. The options are: none - the node does not support HPR, anrOnly - the node only supports Automatic Network Routing (ANR), or rtp - the node supports Rapid Transport Protocol as an end point. The default value of rtp ensures that the node can Aping other nodes via a HPR pipe, this option is also required to allow dependent LU sessions teminating on this node to use HPR and for the node to act as a boundary node between ISR only nodes and the HPR capable portion of the network. With this option, the node can work with non-HPR capable nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), anrOnly(1), rtp(2)  

mscAppnDlurSupport 1.3.6.1.4.1.562.36.2.1.110.101.1.21
This attribute specifies whether or not this node supports dependent logical unit requestor (DLUR). By default, DLUR is not supported. If this attribute is set to yes, ensure that the Dlur subcomponent is provisioned with appropriate values, if this attribute is set to no, the Dlur subcomponent is not used and is ignored if present.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnStateTable 1.3.6.1.4.1.562.36.2.1.110.102
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnStateEntry

mscAppnStateEntry 1.3.6.1.4.1.562.36.2.1.110.102.1
An entry in the mscAppnStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnStateEntry  

mscAppnAdminState 1.3.6.1.4.1.562.36.2.1.110.102.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAppnOperationalState 1.3.6.1.4.1.562.36.2.1.110.102.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAppnUsageState 1.3.6.1.4.1.562.36.2.1.110.102.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAppnOperationalTable 1.3.6.1.4.1.562.36.2.1.110.103
This group contains the node operational characteristics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnOperationalEntry

mscAppnOperationalEntry 1.3.6.1.4.1.562.36.2.1.110.103.1
An entry in the mscAppnOperationalTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnOperationalEntry  

mscAppnUpTime 1.3.6.1.4.1.562.36.2.1.110.103.1.1
This attribute represents the time in hundredths of a second since the node was started or restarted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnHeapSpaceLimit 1.3.6.1.4.1.562.36.2.1.110.103.1.2
This attribute represents the size of the heap in bytes, as obtained by storage management from the underlying operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnHeapSpaceCurrent 1.3.6.1.4.1.562.36.2.1.110.103.1.3
This attribute contains the number of bytes in the memory segment that are currently allocated to the processes associated with the Appn component. SNMP APPN MIB = ibmappnMemoryUsed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnMemWarningThreshold 1.3.6.1.4.1.562.36.2.1.110.103.1.4
This attribute contains the memory allocation threshold beyond which storage management considers the storage resources to be constrained. This is calculated as a fraction of heapSpaceLimit. The value returned now is always zero until the functionality is supported in future release. SNMP APPN MIB = ibmappnMemoryWarnThresh
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnMemCriticalThreshold 1.3.6.1.4.1.562.36.2.1.110.103.1.5
This attribute represents the memory allocation threshold beyond which storage management considers the storage resources to be critically constrained. The value is calculated as a fraction of heapSpaceLimit. The value returned now is always zero until the functionality is supported in future release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnNnFunctionsSupported 1.3.6.1.4.1.562.36.2.1.110.103.1.6
The network node functions supported may include any of the following: receiveRegistration - If present, indicates that this node supports receiving registered characteristics on a GDS frame. This function is not supported in the current release. gateway - If present, indicates that this is a gateway node. centralDirectoryServer - If present, indicates that this node supports central directory server cache. treeCaching -If present, indicates that this node supports route tree cache. treeUpdates - If present, indicates that this node supports incremental tree update, which is only supported when tree caching is supported. intermediateSessionRouting - Indicates that the node supports intermediate session routing. Description of bits: receiveRegistration(0) gateway(1) centralDirectoryServer(2) treeCaching(3) treeUpdates(4) intermediateSessionRouting(5)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnGeneralFunctionsSupported 1.3.6.1.4.1.562.36.2.1.110.103.1.7
The general functions supported may include any of the following: negotiableLs -If present, indicates that this node supports negotiable link stations. segmentReassembly -If present, indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. bindReassembly -If present, indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. parallelTgs -If present, indicates whether this node supports parallel TGs. callIn - If present, indicates whether this node allows call-in from nodes not defined locally. adaptivePacing - If present, indicates whether this node supports adaptive bind pacing. Description of bits: negotiableLs(0) segmentReassembly(1) bindReassembly(2) parallelTgs(3) callIn(4) adaptivePacing(5)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnStatus 1.3.6.1.4.1.562.36.2.1.110.103.1.8
This attribute contains the status of the node. This may be nodeUncongested or one or more of the following: isrCongested The number of ISR sessions is greater than specified by the isrSessionsUpperThreshold attribute. This node is not be included in route selection by other nodes when this congestion exists. endPtDepleted The number of end-point sessions has reached the maximum specified. isrDepleted The number of ISR sessions has reached the maximum specified by the maximumIsrSessions attribute. This node is not included in intermediate route selection by other nodes when resources are depleted. quiescing Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. Description of bits: nodeUncongested(0) notused1(1) quiescing(2) notused3(3) notused4(4) endPtDepleted(5) isrDepleted(6) isrCongested(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnFlowReductionSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.103.1.9
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update the adjacent network nodes. SNMP APPN MIB = ibmappnNodeNnFrsn
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnResourceSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.103.1.10
Resource sequence number of this Appn network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnDefinedLsGoodXids 1.3.6.1.4.1.562.36.2.1.110.103.1.11
This attribute represents the total number of successful XIDs that have been received on all defined link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDefinedLsBadXids 1.3.6.1.4.1.562.36.2.1.110.103.1.12
This attribute represents the total number of unsuccessful XIDs that have been received on all defined link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDynamicLsGoodXids 1.3.6.1.4.1.562.36.2.1.110.103.1.13
This attribute represents the total number of successful XIDs that have been received on all dynamic link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDynamicLsBadXids 1.3.6.1.4.1.562.36.2.1.110.103.1.14
This attribute represents the total number of unsuccessful XIDs that have been received on all dynamic link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnActiveSvcs 1.3.6.1.4.1.562.36.2.1.110.103.1.15
This attribute indicates the number of general switched virtual circuits (GSVC) on this Appn node at the time of the query. This attribute does not include the Frame Relay switched virtual circuits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnActiveLinkStations 1.3.6.1.4.1.562.36.2.1.110.103.1.16
This attribute indicates the number of link stations (for GSVCs, Frame Relay PVCs and SVCs) on the Appn node at the time of the query.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnDna 1.3.6.1.4.1.562.36.2.1.110.2
OBJECT IDENTIFIER    

mscAppnDnaRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.2.1
This entry controls the addition and deletion of mscAppnDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaRowStatusEntry

mscAppnDnaRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.2.1.1
A single entry in the table represents a single mscAppnDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaRowStatusEntry  

mscAppnDnaRowStatus 1.3.6.1.4.1.562.36.2.1.110.2.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDnaComponentName 1.3.6.1.4.1.562.36.2.1.110.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDnaStorageType 1.3.6.1.4.1.562.36.2.1.110.2.1.1.4
This variable represents the storage type value for the mscAppnDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDnaIndex 1.3.6.1.4.1.562.36.2.1.110.2.1.1.10
This variable represents the index for the mscAppnDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDnaAddressTable 1.3.6.1.4.1.562.36.2.1.110.2.10
Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. String of address digits is complemented by type of address and Npi. These attributes are used to interpret format of the address digits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaAddressEntry

mscAppnDnaAddressEntry 1.3.6.1.4.1.562.36.2.1.110.2.10.1
An entry in the mscAppnDnaAddressTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaAddressEntry  

mscAppnDnaNumberingPlanIndicator 1.3.6.1.4.1.562.36.2.1.110.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet switched data networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnDnaDataNetworkAddress 1.3.6.1.4.1.562.36.2.1.110.2.10.1.2
Dna attribute contains digits which form unique identifier of the customer interface. It can be compared (approximation only) to telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnDnaOutgoingOptionsTable 1.3.6.1.4.1.562.36.2.1.110.2.12
OutgoingOptions group defines call options of a Dna for calls which are made out of the interface represented by Dna. All these options are not used for calls arriving to the interface represented by Dna.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaOutgoingOptionsEntry

mscAppnDnaOutgoingOptionsEntry 1.3.6.1.4.1.562.36.2.1.110.2.12.1
An entry in the mscAppnDnaOutgoingOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaOutgoingOptionsEntry  

mscAppnDnaOutDefaultPriority 1.3.6.1.4.1.562.36.2.1.110.2.12.1.7
This attribute, if set to normal indicates that the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority - if the priority is not specified by the DTE. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority. This option can be also included in X.25 signalling, in such case it will be overruled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscAppnDnaOutDefaultPathSensitivity 1.3.6.1.4.1.562.36.2.1.110.2.12.1.11
This attribute specifies the default class of routing for delay/ throughput sensitive routing for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of throughput, indicates that the default class of routing is throughput sensitive routing. If set to a value of delay, then the default class of routing is delay sensitive routing. In the future, the class of routing sensitivity may be overridden at the calling end of the call as follows: The default class of routing sensitivity can be overridden by the DTE in the call request packet through the TDS&I (Transit Delay Selection & Indication) facility if the DTE supports this facility. Whether or not the DTE is permitted to signal the TDS&I facility will depend on the DTE (i.e.: TDS&I is supported in X.25 only), and will depend on whether the port is configured to permit the TDS&I facility. In Passport, the treatment of DTE facilities (for example, NUI, RPOA, and TDS&I) is not fully defined yet since it is not required. At the point in time when it is required, the parameter to control whether or not the DTE is permitted to signal the TDS&I will be in a Facility Treatment component. Currently, the default is to disallow the TDS&I facility from the DTE.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER throughput(0), delay(1)  

mscAppnDnaOutPathSensitivityOverRide 1.3.6.1.4.1.562.36.2.1.110.2.12.1.12
If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on sensitivity to override its provisioning data,
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDnaOutDefaultPathReliability 1.3.6.1.4.1.562.36.2.1.110.2.12.1.14
This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of normal, indicates that the default class of routing is normal reliability routing. If set to a value of high, then the default class of routing is high reliability routing. High reliability is the standard choice for most DPN and Passport services. It usually indicates that packets are overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network when errors are detected or during link congestion. However, the Vc handles the duplication and disordering to ensure that packets are delivered to the DTE properly. For the Frame Relay service, duplication of packets is not desired, in which case, normal reliability may be chosen as the preferred class of routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscAppnDnaOutAccess 1.3.6.1.4.1.562.36.2.1.110.2.12.1.17
This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) to the open (non-CUG) part of the network are permitted. It also permits outgoing calls to DTEs that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Outgoing Access' feature for Dna's in that outgoing access is granted if this attribute is set to a value of allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscAppnDnaDefaultTransferPriority 1.3.6.1.4.1.562.36.2.1.110.2.12.1.18
This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of defaultTransferPriority is normal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

mscAppnDnaTransferPriorityOverRide 1.3.6.1.4.1.562.36.2.1.110.2.12.1.19
When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provisioning data. If it is set no, the called end will use its own provisioning data on transfer priority. The default of outTransferPriorityOverRide is yes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDnaIncomingOptionsTable 1.3.6.1.4.1.562.36.2.1.110.2.13
IncomingOptions defines set of options for incoming calls. These options are used for calls arriving to the interface represented by Dna. For calls originated from the interface, IncomingOptions attributes are not used.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaIncomingOptionsEntry

mscAppnDnaIncomingOptionsEntry 1.3.6.1.4.1.562.36.2.1.110.2.13.1
An entry in the mscAppnDnaIncomingOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaIncomingOptionsEntry  

mscAppnDnaIncAccess 1.3.6.1.4.1.562.36.2.1.110.2.13.1.9
This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have Outgoing Access capabilities. If set to a value of disallowed, then such calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Incoming Access' feature for Dnas in that incoming access is granted if this attribute is set to a value of allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscAppnDnaCallOptionsTable 1.3.6.1.4.1.562.36.2.1.110.2.14
CallOptions group defines additional options for calls not related directly to direction of a call.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaCallOptionsEntry

mscAppnDnaCallOptionsEntry 1.3.6.1.4.1.562.36.2.1.110.2.14.1
An entry in the mscAppnDnaCallOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaCallOptionsEntry  

mscAppnDnaDefaultRecvFrmNetworkThruputClass 1.3.6.1.4.1.562.36.2.1.110.2.14.1.5
This attribute indicates the default receive throughput class for all calls using this particular Dna.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

mscAppnDnaDefaultSendToNetworkThruputClass 1.3.6.1.4.1.562.36.2.1.110.2.14.1.6
This attribute indicates the default send throughput class for all calls using this particular Dna.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

mscAppnDnaDefaultRecvFrmNetworkWindowSize 1.3.6.1.4.1.562.36.2.1.110.2.14.1.7
This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..7  

mscAppnDnaDefaultSendToNetworkWindowSize 1.3.6.1.4.1.562.36.2.1.110.2.14.1.8
This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..7  

mscAppnDnaAccountClass 1.3.6.1.4.1.562.36.2.1.110.2.14.1.10
This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator and it is an arbitrary number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnDnaAccountCollection 1.3.6.1.4.1.562.36.2.1.110.2.14.1.11
This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the parameters, force, indicates that accounting records are to be collected irrespective of other collection reasons. If none of these reasons are set, then accounting will be suppressed. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnDnaServiceExchange 1.3.6.1.4.1.562.36.2.1.110.2.14.1.12
This attribute is an arbitrary number, entered by the network operator. It is included in the accounting record created by Vc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnDnaHgM 1.3.6.1.4.1.562.36.2.1.110.2.2
OBJECT IDENTIFIER    

mscAppnDnaHgMRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.2.2.1
This entry controls the addition and deletion of mscAppnDnaHgM components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaHgMRowStatusEntry

mscAppnDnaHgMRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1
A single entry in the table represents a single mscAppnDnaHgM component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaHgMRowStatusEntry  

mscAppnDnaHgMRowStatus 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDnaHgM components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDnaHgMComponentName 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDnaHgMStorageType 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.4
This variable represents the storage type value for the mscAppnDnaHgM tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDnaHgMIndex 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.10
This variable represents the index for the mscAppnDnaHgM tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDnaHgMIfTable 1.3.6.1.4.1.562.36.2.1.110.2.2.10
This group contains the interface parameters between the HuntGroupMember and the Hunt Group server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaHgMIfEntry

mscAppnDnaHgMIfEntry 1.3.6.1.4.1.562.36.2.1.110.2.2.10.1
An entry in the mscAppnDnaHgMIfTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaHgMIfEntry  

mscAppnDnaHgMAvailabilityUpdateThreshold 1.3.6.1.4.1.562.36.2.1.110.2.2.10.1.1
This attribute indicates the number of channels that have to be freed or occupied before the Availability Message Packet (AMP) is sent to the Hunt Group Server informing it of the status of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnDnaHgMOpTable 1.3.6.1.4.1.562.36.2.1.110.2.2.11
This group contains the operational attributes of the HuntGroupMember component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaHgMOpEntry

mscAppnDnaHgMOpEntry 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1
An entry in the mscAppnDnaHgMOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaHgMOpEntry  

mscAppnDnaHgMMaxAvailableChannels 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1.1
This attribute indicates the maximum number of available channels for this HuntGroupMember.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnDnaHgMAvailableChannels 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1.2
This attribute indicates the number of available channels reported to the hunt group in the Availability Message Packet (AMP). It is incremented by the application when a channel is freed and decremented when a channel is occupied.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnDnaHgMAvailabilityDelta 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1.3
This attribute indicates the net change in the available channels since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the absolute value of this attribute reaches the availabilityUpdateThreshold an AMP is sent to the host and the availabilityDelta is reset to 0. If this attribute is positive it means an increase of the number of available channels. If it is negative it means a decrease in the number of available channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -4096..4096  

mscAppnDnaHgMHgAddr 1.3.6.1.4.1.562.36.2.1.110.2.2.2
OBJECT IDENTIFIER    

mscAppnDnaHgMHgAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1
This entry controls the addition and deletion of mscAppnDnaHgMHgAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaHgMHgAddrRowStatusEntry

mscAppnDnaHgMHgAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1
A single entry in the table represents a single mscAppnDnaHgMHgAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaHgMHgAddrRowStatusEntry  

mscAppnDnaHgMHgAddrRowStatus 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDnaHgMHgAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDnaHgMHgAddrComponentName 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDnaHgMHgAddrStorageType 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.4
This variable represents the storage type value for the mscAppnDnaHgMHgAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDnaHgMHgAddrIndex 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.10
This variable represents the index for the mscAppnDnaHgMHgAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1  

mscAppnDnaHgMHgAddrAddrTable 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10
This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaHgMHgAddrAddrEntry

mscAppnDnaHgMHgAddrAddrEntry 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10.1
An entry in the mscAppnDnaHgMHgAddrAddrTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaHgMHgAddrAddrEntry  

mscAppnDnaHgMHgAddrNumberingPlanIndicator 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10.1.1
This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to the X.121 or E.164 numbering plans.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnDnaHgMHgAddrDataNetworkAddress 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10.1.2
This attribute specifies the digits that form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnDnaCug 1.3.6.1.4.1.562.36.2.1.110.2.3
OBJECT IDENTIFIER    

mscAppnDnaCugRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.2.3.1
This entry controls the addition and deletion of mscAppnDnaCug components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaCugRowStatusEntry

mscAppnDnaCugRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1
A single entry in the table represents a single mscAppnDnaCug component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaCugRowStatusEntry  

mscAppnDnaCugRowStatus 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDnaCug components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDnaCugComponentName 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDnaCugStorageType 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.4
This variable represents the storage type value for the mscAppnDnaCug tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDnaCugIndex 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.10
This variable represents the index for the mscAppnDnaCug tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

mscAppnDnaCugCugOptionsTable 1.3.6.1.4.1.562.36.2.1.110.2.3.10
Attributes in this group defines ClosedUserGroup options associated with interlockCode. Dnas with the same Cug (interlockCode) make calls within this group. Various combinations which permit or prevent calls in the same Cug group are defined here.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDnaCugCugOptionsEntry

mscAppnDnaCugCugOptionsEntry 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1
An entry in the mscAppnDnaCugCugOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDnaCugCugOptionsEntry  

mscAppnDnaCugType 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.1
This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER national(0), international(1)  

mscAppnDnaCugDnic 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.2
This attribute specifies the dnic (Data Network ID Code) the Cug by which packet networks are identified. This attribute is not applicable if the Cug is a national Cug, as specified by the Cug type attribute. There are usually 1 or 2 dnics assigned per country, for public networks. The U.S. is an exception where each BOC has a dnic. Also, a group of private networks can have its own dnic. dnic value is not an arbitrary number. It is assigned by international agreement and controlled by CCITT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(4)  

mscAppnDnaCugInterlockCode 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.3
This attribute specifies the Cug identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dnas) with this number can make calls to Dnas with the same interlockCode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDnaCugPreferential 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.4
This attribute, if set to yes indicates that this Cug is the preferential Cug, in which case it will be used during the call establishment phase if the DTE has not explicitly specified a Cug index in the call request packet. If set to no, then this Cug is not the preferential Cug. Only one of the Cugs associated with a particular Dna can be the preferential Cug - only one Cug can have this attribute set to yes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDnaCugOutCalls 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.5
This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) be made using this particular Cug. If set to a value of disallowed, then outgoing calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Outgoing Calls Barred' feature for Cugs in that outgoing calls are barred if this attribute is set to a value of disallowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscAppnDnaCugIncCalls 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.6
This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) be made using this particular Cug. If set to disallowed, then incoming calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Incoming Calls Barred' feature for Cugs in that incoming calls are barred if this attribute is set to a value of disallowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscAppnDnaCugPrivileged 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.7
This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE subscribe to the Cug, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTEs in which case the other DTEs cannot call one another, but can call the host. In this example, the host would have the privileged Cug, and the other DTEs would belong to the same Cug, but it would not be privileged.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDlci 1.3.6.1.4.1.562.36.2.1.110.3
OBJECT IDENTIFIER    

mscAppnDlciRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.1
This entry controls the addition and deletion of mscAppnDlci components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciRowStatusEntry

mscAppnDlciRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.1.1
A single entry in the table represents a single mscAppnDlci component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciRowStatusEntry  

mscAppnDlciRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlci components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDlciComponentName 1.3.6.1.4.1.562.36.2.1.110.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciStorageType 1.3.6.1.4.1.562.36.2.1.110.3.1.1.4
This variable represents the storage type value for the mscAppnDlci tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciIndex 1.3.6.1.4.1.562.36.2.1.110.3.1.1.10
This variable represents the index for the mscAppnDlci tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 16..4095  

mscAppnDlciStateTable 1.3.6.1.4.1.562.36.2.1.110.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciStateEntry

mscAppnDlciStateEntry 1.3.6.1.4.1.562.36.2.1.110.3.10.1
An entry in the mscAppnDlciStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciStateEntry  

mscAppnDlciAdminState 1.3.6.1.4.1.562.36.2.1.110.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAppnDlciOperationalState 1.3.6.1.4.1.562.36.2.1.110.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAppnDlciUsageState 1.3.6.1.4.1.562.36.2.1.110.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAppnDlciSpOpTable 1.3.6.1.4.1.562.36.2.1.110.3.12
This group contains the actual service parameters in use for this instance of Dlci.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciSpOpEntry

mscAppnDlciSpOpEntry 1.3.6.1.4.1.562.36.2.1.110.3.12.1
An entry in the mscAppnDlciSpOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciSpOpEntry  

mscAppnDlciRateEnforcement 1.3.6.1.4.1.562.36.2.1.110.3.12.1.1
This attribute indicates whether rate enforcement is in use for this Dlci.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscAppnDlciCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.110.3.12.1.2
This attribute indicates the current effective committed information rate (cir) in bits per second (bit/s). cir is the rate at which the network agrees to transfer data with Discard Eligiblity indication DE=0 under normal conditions. This attribute should be ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnDlciCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.110.3.12.1.3
This attribute indicates the committed burst size (bc) in bits. bc is the amount of data that the network agrees to transfer under normal conditions over a measurement interval (t). bc is used for data with Discard Eligibility indication DE=0. DE=1 data does not use bc at all, excessBurstSize if is used instead. This attribute should be ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnDlciExcessInformationRate 1.3.6.1.4.1.562.36.2.1.110.3.12.1.4
This attribute indicates the current effective excess information rate (eir) in bits per second (bit/s). eir is the rate at which the network agrees to transfer data with Discard Eligibility indication DE=1 under normal conditions. DE can be set by the user or the network. DE indication of a data frame is set to 1 by the network after cir has been exceeded while eir is still available for data transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnDlciExcessBurstSize 1.3.6.1.4.1.562.36.2.1.110.3.12.1.5
This attribute indicates the excess burst size (be) in bits. be is the amount of uncommitted data that the network will attempt to deliver over measurement interval (t). Data marked DE=1 by the user or by the network is accounted for here. This attribute should be ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2048000  

mscAppnDlciMeasurementInterval 1.3.6.1.4.1.562.36.2.1.110.3.12.1.6
This attribute indicates the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..25500  

mscAppnDlciDc 1.3.6.1.4.1.562.36.2.1.110.3.2
OBJECT IDENTIFIER    

mscAppnDlciDcRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.2.1
This entry controls the addition and deletion of mscAppnDlciDc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciDcRowStatusEntry

mscAppnDlciDcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1
A single entry in the table represents a single mscAppnDlciDc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciDcRowStatusEntry  

mscAppnDlciDcRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlciDc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDlciDcComponentName 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciDcStorageType 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.4
This variable represents the storage type value for the mscAppnDlciDc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciDcIndex 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.10
This variable represents the index for the mscAppnDlciDc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDlciDcOptionsTable 1.3.6.1.4.1.562.36.2.1.110.3.2.10
The Options group defines attributes associated with a direct call. It defines a complete connection in terms of path and call options. This connection can be permanent (PVC) or switched (SVC). It can have facilities. The total number of bytes of facilities including the facility codes, and all of the facility data from all of the four classes of facilities: CCITT_Facilities DTE_Facilities National_Facilities International_Facilities must not exceed 512.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciDcOptionsEntry

mscAppnDlciDcOptionsEntry 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1
An entry in the mscAppnDlciDcOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciDcOptionsEntry  

mscAppnDlciDcRemoteNpi 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.3
This attribute specifies the numbering plan used for remoteDna.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnDlciDcRemoteDna 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.4
This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to which this direct call will be sent. Initially, the called DTE address attribute must be present, that is, there must be a valid destination address. However, it may be possible in the future to configure the direct call with a mnemonic address, in which case, this attribute will contain a zero-length Dna, and the mnemonic address will be carried as one of the facilities.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnDlciDcRemoteDlci 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.5
This attribute provides the remote DLCI (Logical Channel Number) - it is used only for PVCs, where attribute type is set to permanentMaster or permanentSlave or permanentBackupSlave. In switched case, value of remoteDlci is not known when call request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4095  

mscAppnDlciDcType 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.6
This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanentMaster, then a permanent connection will be established between two ends. The remote end must be defined as a permanentSlave, permanentBackupSlave or permanentSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as permanentMaster always initiates the calls. It will attempt to call once per minute. If the value is set to permanentSlave then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote end is defined as anything else. The permanentSlave end will attempt to call once per minute. If the value is set to permanentSlaveWithBackup then a permanent connection will be established between the 2 ends . The remote end must be defined as a permanentMaster. The Connection cannot be established if the remote end is defined as anything else. The permanentSlaveWithBackup end will attempt to call once per minute. If the value is set to permanentBackupSlave then a permanent connection will be established between the 2 ends only if the permanentMaster end is disconnected from the permanentSlaveWithBackup end and a backup call is established by the redirection system. If the permanentSlaveWithBackup interface becomes visible again, the permanentBackupSlave end is disconnected and the permanentSlaveWithBackup end is reconnected to the permanentMaster end. The permanentBackupSlave end does not try to establish PVC call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER permanentMaster(1), permanentSlave(2), permanentBackupSlave(3), permanentSlaveWithBackup(4)  

mscAppnDlciDcTransferPriority 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.9
This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(9), useDnaDefTP(255)  

mscAppnDlciDcDiscardPriority 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.10
This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Traffic with normal priority are discarded first than the traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority. The default of discardPriority is useDnaDefPriority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(1), useDnaDefPriority(3)  

mscAppnDlciDcNfaTable 1.3.6.1.4.1.562.36.2.1.110.3.2.283
Two explicit attributes discardPriority and transferPriority are created to replace H.01 and H.30 in the group VcsDirectCallOptionsProv of this file. The migrate escape here (DcComponent::migrateFaxEscape) propagates the old provisioning data under H.01 and H.30 into discardPriority and transferPriority. The rule of the above propagation are: 0 in H.01 is equivalent to discardPriority 0; 1 in H.01 is equivalent to discardPriority 1. And 0 in H.30 is equivalent to transferPriority normal; 1 in H.30 is equivalent to transferPriority high. Please refer to discardPriority and transferPriority for more information on how to use them.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciDcNfaEntry

mscAppnDlciDcNfaEntry 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1
An entry in the mscAppnDlciDcNfaTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciDcNfaEntry  

mscAppnDlciDcNfaIndex 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1.1
This variable represents the index for the mscAppnDlciDcNfaTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Integer32 1 | 48  

mscAppnDlciDcNfaValue 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1.2
This variable represents an individual value for the mscAppnDlciDcNfaTable.
Status: obsolete Access: read-write
OBJECT-TYPE    
  HexString Size(0..128)  

mscAppnDlciDcNfaRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1.3
This variable is used to control the addition and deletion of individual values of the mscAppnDlciDcNfaTable.
Status: obsolete Access: write-only
OBJECT-TYPE    
  RowStatus  

mscAppnDlciVc 1.3.6.1.4.1.562.36.2.1.110.3.3
OBJECT IDENTIFIER    

mscAppnDlciVcRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.3.1
This entry controls the addition and deletion of mscAppnDlciVc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciVcRowStatusEntry

mscAppnDlciVcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1
A single entry in the table represents a single mscAppnDlciVc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciVcRowStatusEntry  

mscAppnDlciVcRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlciVc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDlciVcComponentName 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciVcStorageType 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.4
This variable represents the storage type value for the mscAppnDlciVc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciVcIndex 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.10
This variable represents the index for the mscAppnDlciVc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDlciVcCadTable 1.3.6.1.4.1.562.36.2.1.110.3.3.10
This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciVcCadEntry

mscAppnDlciVcCadEntry 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1
An entry in the mscAppnDlciVcCadTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciVcCadEntry  

mscAppnDlciVcType 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.1
This attribute displays the type of call, pvc,svc or spvc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER svc(0), pvc(1), spvc(2)  

mscAppnDlciVcState 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscAppnDlciVcPreviousState 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscAppnDlciVcDiagnosticCode 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnDlciVcPreviousDiagnosticCode 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnDlciVcCalledNpi 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnDlciVcCalledDna 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnDlciVcCalledLcn 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

mscAppnDlciVcCallingNpi 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnDlciVcCallingDna 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnDlciVcCallingLcn 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.11
This attribute displays the Logical Channel Number of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

mscAppnDlciVcAccountingEnabled 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

mscAppnDlciVcFastSelectCall 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.13
This attribute displays that this is a fast select call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDlciVcPathReliability 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.19
This attribute displays the path reliability.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscAppnDlciVcAccountingEnd 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

mscAppnDlciVcPriority 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.21
This attribute displays whether the call is a normal or a high priority call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscAppnDlciVcSegmentSize 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnDlciVcMaxSubnetPktSize 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.27
This attribute indicates the maximum packet size allowed on the Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnDlciVcRcosToNetwork 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.28
This attribute indicates the routing metric routing class of service to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscAppnDlciVcRcosFromNetwork 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.29
This attribute displays the routing metric Routing Class of Service from the Network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscAppnDlciVcEmissionPriorityToNetwork 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.30
This attribute displays the network internal emission priotity to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscAppnDlciVcEmissionPriorityFromNetwork 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.31
This attribute displays the network internal emission priotity from the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscAppnDlciVcDataPath 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.32
This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscAppnDlciVcIntdTable 1.3.6.1.4.1.562.36.2.1.110.3.3.11
This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciVcIntdEntry

mscAppnDlciVcIntdEntry 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1
An entry in the mscAppnDlciVcIntdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciVcIntdEntry  

mscAppnDlciVcCallReferenceNumber 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.1
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..16777215  

mscAppnDlciVcElapsedTimeTillNow 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscAppnDlciVcSegmentsRx 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscAppnDlciVcSegmentsSent 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscAppnDlciVcStartTime 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

mscAppnDlciVcFrdTable 1.3.6.1.4.1.562.36.2.1.110.3.3.12
This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciVcFrdEntry

mscAppnDlciVcFrdEntry 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1
An entry in the mscAppnDlciVcFrdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciVcFrdEntry  

mscAppnDlciVcFrmCongestedToSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.2
This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcCannotForwardToSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.3
This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcNotDataXferToSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.4
This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.5
This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcCombErrorsFromSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.6
This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcDuplicatesFromSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.7
This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcNotDataXferFromSubnet 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.8
This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcFrmLossTimeouts 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.9
This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcOoSeqByteCntExceeded 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.10
This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcPeakOoSeqPktCount 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.11
This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.12
This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcSendSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.13
This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcPktRetryTimeouts 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.15
This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcPeakRetryQueueSize 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.16
This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcSubnetRecoveries 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.17
This attribute displays the number of successful Vc recovery attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnDlciVcOoSeqPktCntExceeded 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.19
This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnDlciVcPeakOoSeqByteCount 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.20
This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000  

mscAppnDlciVcDmepTable 1.3.6.1.4.1.562.36.2.1.110.3.3.417
This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciVcDmepEntry

mscAppnDlciVcDmepEntry 1.3.6.1.4.1.562.36.2.1.110.3.3.417.1
An entry in the mscAppnDlciVcDmepTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciVcDmepEntry  

mscAppnDlciVcDmepValue 1.3.6.1.4.1.562.36.2.1.110.3.3.417.1.1
This variable represents both the value and the index for the mscAppnDlciVcDmepTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAppnDlciBnnLsDef 1.3.6.1.4.1.562.36.2.1.110.3.4
OBJECT IDENTIFIER    

mscAppnDlciBnnLsDefRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.4.1
This entry controls the addition and deletion of mscAppnDlciBnnLsDef components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciBnnLsDefRowStatusEntry

mscAppnDlciBnnLsDefRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1
A single entry in the table represents a single mscAppnDlciBnnLsDef component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciBnnLsDefRowStatusEntry  

mscAppnDlciBnnLsDefRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlciBnnLsDef components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDlciBnnLsDefComponentName 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciBnnLsDefStorageType 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.4
This variable represents the storage type value for the mscAppnDlciBnnLsDef tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciBnnLsDefIndex 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.10
This variable represents the index for the mscAppnDlciBnnLsDef tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

mscAppnDlciBnnLsDefProvTable 1.3.6.1.4.1.562.36.2.1.110.3.4.2
This group contains the provisioning data for a Link Station on a frame relay DLCI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciBnnLsDefProvEntry

mscAppnDlciBnnLsDefProvEntry 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1
An entry in the mscAppnDlciBnnLsDefProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciBnnLsDefProvEntry  

mscAppnDlciBnnLsDefDspuService 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.1
This attribute specifies which down stream physical unit service is supported on this Link Station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), dlur(2)  

mscAppnDlciBnnLsDefAdjacentCpName 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.2
This attribute specifies the fully qualified control point (FQCP) name of the adjacent node. This attribute is ignored if the adjacent node is not an APPN node. If this attribute is not empty it is checked against the name received from the adjacent node during the XID exchange, unless adjacentCpType is set to backLevelLenNode (in which case it is used to identify the adjacent node). The first portion of this name, up to the period, is the network identifier for the network to which the adjacent node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDlciBnnLsDefAdjacentCpType 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.3
This attribute specifies the adjacent control point (CP) type: networkNode - Specifies that the adjacent device is an APPN network node. endNode - Specifies that the adjacent device is an APPN end node. appnNode - Specifies that the adjacent device is an APPN node or an up-level LEN node, and the node type will be dynamically determined during XID exchange. backLevelLenNode - Specifies that the adjacent device is a back- level LEN node. hostXID3 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 3 XID. hostXID0 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 0 XID. dlurXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and XID exchange in link activation dlurNoXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and no XID exchange in link activation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER appnNode(0), networkNode(2), endNode(3), backLevelLenNode(5), hostXID3(6), hostXID0(7), dlurXID(8), dlurNoXID(9)  

mscAppnDlciBnnLsDefTgNum 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.5
This attribute specifies the TG number to be used for this link. It is only relevant if the adjacent device is an APPN node and is ignored otherwise. If adjacentCpType is set to backLevelLenNode this attribute is ignored and the TG number is assumed to be 1. If this attribute is set to zero (0), the TG number is dynamically assigned and can be determined from the tgNum attribute of the related LinkStation component. If this attribute is non-zero, the adjacentCpType must be set to appnNode, networkNode, endNode or backLevelLenNode, and the TG number on the adjacent device must also be set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

mscAppnDlciBnnLsDefDlusName 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.6
This attribute specifies the fully qualified control point (FQCP) name of the primary DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDlciBnnLsDefBackupDlusName 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.7
This attribute specifies the fully qualified control point (FQCP) name of the backup DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty and the dlusName attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. If this attribute is specified, the dlusName attribute must also contain a non-empty string. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDlciBnnLsDefHprSupported 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.8
This attribute specifies whether high performance routing (HPR) is supported on this link station. If this attribute is set to sameAsNode, and the hprSupport attribute in the APPN component is set to either rtp or anr, HPR will be negotiated with the remote node, if the hprSupport attrbute in the APPN component is set to no HPR will not be negotiated with the remote node. If this attribute is set to no, HPR will not be negotiated on this link station. The results of this negotiation are visible in the hprSupport attribute of the related LinkStation component
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), sameAsNode(1)  

mscAppnDlciBnnLsDefAdjacentNodeID 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.9
This attribute specifies the node id of the adjacent device. This attribute, if non-zero, is used to check the identity of the adjacent device. If this attribute is zero, the identity is not checked. If adjacentCpType is set to dlurNoXID, this attribute is used to identify the downstream PU to the DLUS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..4294967295  

mscAppnDlciBnnLsDefCpCpSessionSupport 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.10
This attribute specifies whether this link station supports CP-CP sessions. This attribute is ignored if the adjacent device is not an APPN node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDlciBnnLsDefMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.11
This attribute specifies the maximum basic transmission unit (BTU) size that can be sent on this link station. This attribute is used to negotiate the maximum BTU size that can be transmitted between a link station pair. If the link and node are HPR-capable, then this attribute must be set to a value greater than or equal to 768.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 99..32768  

mscAppnDlciBnnLsDefLsRole 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.12
This attribute specifies the role for this link station. This attribute will be ignored if adjacentCpType is set to hostXID0 or hostXID3 (the link station will always be secondary), or if adjacentCpType is set to dlurXID or dlurNoXID (the link station will always be primary).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negotiable(0), primary(1), secondary(2)  

mscAppnDlciSp 1.3.6.1.4.1.562.36.2.1.110.3.5
OBJECT IDENTIFIER    

mscAppnDlciSpRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.5.1
This entry controls the addition and deletion of mscAppnDlciSp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciSpRowStatusEntry

mscAppnDlciSpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1
A single entry in the table represents a single mscAppnDlciSp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciSpRowStatusEntry  

mscAppnDlciSpRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlciSp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDlciSpComponentName 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciSpStorageType 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.4
This variable represents the storage type value for the mscAppnDlciSp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciSpIndex 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.10
This variable represents the index for the mscAppnDlciSp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDlciSpParmsTable 1.3.6.1.4.1.562.36.2.1.110.3.5.11
This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this instance of Dlci.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciSpParmsEntry

mscAppnDlciSpParmsEntry 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1
An entry in the mscAppnDlciSpParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciSpParmsEntry  

mscAppnDlciSpRateEnforcement 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.1
This attribute specifies whether rate enforcement is to be used on this DLCI. Turning on rate enforcement means that the data sent from the service to the virtual circuit is subjected to rate control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscAppnDlciSpCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.2
This attribute specifies the committed information rate (cir) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on cir and the committed burst size (bc). An exception to this occurs when cir is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, bc must also be 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscAppnDlciSpCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.3
This attribute specifies the committed burst size (bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in bc. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, cir must also be 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscAppnDlciSpExcessBurstSize 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.4
This attribute specifies the excess burst size (be) in bits. be is the amount of uncommitted data that the network will attempt to deliver over measurement interval (t). Data marked DE=1 by the user or by the network is accounted for here. cir, bc, and be cannot all be 0 when rateEnforcement is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscAppnDlciSpMeasurementInterval 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.5
This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. When cir and bc are 0 and rateEnforcement is on, this attribute must be provisioned. When cir and bc are non-zero, the time interval is internally calculated. In that situation, this attribute is ignored, and is not representative of the time interval. This attribute is also ignored when rateEnforcement is off. If rateEnforcement is on and both cir and bc are 0, this field must be non-zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..25500  

mscAppnDlciBanLsDef 1.3.6.1.4.1.562.36.2.1.110.3.6
OBJECT IDENTIFIER    

mscAppnDlciBanLsDefRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.6.1
This entry controls the addition and deletion of mscAppnDlciBanLsDef components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciBanLsDefRowStatusEntry

mscAppnDlciBanLsDefRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1
A single entry in the table represents a single mscAppnDlciBanLsDef component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciBanLsDefRowStatusEntry  

mscAppnDlciBanLsDefRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlciBanLsDef components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDlciBanLsDefComponentName 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciBanLsDefStorageType 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.4
This variable represents the storage type value for the mscAppnDlciBanLsDef tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciBanLsDefMacIndex 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.10
This variable represents an index for the mscAppnDlciBanLsDef tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(6)  

mscAppnDlciBanLsDefSapIndex 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.11
This variable represents an index for the mscAppnDlciBanLsDef tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

mscAppnDlciBanLsDefProvTable 1.3.6.1.4.1.562.36.2.1.110.3.6.2
This group contains the provisioning data for a Link Station on a frame relay DLCI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciBanLsDefProvEntry

mscAppnDlciBanLsDefProvEntry 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1
An entry in the mscAppnDlciBanLsDefProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciBanLsDefProvEntry  

mscAppnDlciBanLsDefDspuService 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.1
This attribute specifies which down stream physical unit service is supported on this Link Station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), dlur(2)  

mscAppnDlciBanLsDefAdjacentCpName 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.2
This attribute specifies the fully qualified control point (FQCP) name of the adjacent node. This attribute is ignored if the adjacent node is not an APPN node. If this attribute is not empty it is checked against the name received from the adjacent node during the XID exchange, unless adjacentCpType is set to backLevelLenNode (in which case it is used to identify the adjacent node). The first portion of this name, up to the period, is the network identifier for the network to which the adjacent node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDlciBanLsDefAdjacentCpType 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.3
This attribute specifies the adjacent control point (CP) type: networkNode - Specifies that the adjacent device is an APPN network node. endNode - Specifies that the adjacent device is an APPN end node. appnNode - Specifies that the adjacent device is an APPN node or an up-level LEN node, and the node type will be dynamically determined during XID exchange. backLevelLenNode - Specifies that the adjacent device is a back- level LEN node. hostXID3 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 3 XID. hostXID0 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 0 XID. dlurXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and XID exchange in link activation dlurNoXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and no XID exchange in link activation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER appnNode(0), networkNode(2), endNode(3), backLevelLenNode(5), hostXID3(6), hostXID0(7), dlurXID(8), dlurNoXID(9)  

mscAppnDlciBanLsDefTgNum 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.5
This attribute specifies the TG number to be used for this link. It is only relevant if the adjacent device is an APPN node and is ignored otherwise. If adjacentCpType is set to backLevelLenNode this attribute is ignored and the TG number is assumed to be 1. If this attribute is set to zero (0), the TG number is dynamically assigned and can be determined from the tgNum attribute of the related LinkStation component. If this attribute is non-zero, the adjacentCpType must be set to appnNode, networkNode, endNode or backLevelLenNode, and the TG number on the adjacent device must also be set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

mscAppnDlciBanLsDefDlusName 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.6
This attribute specifies the fully qualified control point (FQCP) name of the primary DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDlciBanLsDefBackupDlusName 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.7
This attribute specifies the fully qualified control point (FQCP) name of the backup DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty and the dlusName attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. If this attribute is specified, the dlusName attribute must also contain a non-empty string. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDlciBanLsDefHprSupported 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.8
This attribute specifies whether high performance routing (HPR) is supported on this link station. If this attribute is set to sameAsNode, and the hprSupport attribute in the APPN component is set to either rtp or anr, HPR will be negotiated with the remote node, if the hprSupport attrbute in the APPN component is set to no HPR will not be negotiated with the remote node. If this attribute is set to no, HPR will not be negotiated on this link station. The results of this negotiation are visible in the hprSupport attribute of the related LinkStation component
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), sameAsNode(1)  

mscAppnDlciBanLsDefAdjacentNodeID 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.9
This attribute specifies the node id of the adjacent device. This attribute, if non-zero, is used to check the identity of the adjacent device. If this attribute is zero, the identity is not checked. If adjacentCpType is set to dlurNoXID, this attribute is used to identify the downstream PU to the DLUS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..4294967295  

mscAppnDlciBanLsDefCpCpSessionSupport 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.10
This attribute specifies whether this link station supports CP-CP sessions. This attribute is ignored if the adjacent device is not an APPN node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDlciBanLsDefMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.11
This attribute specifies the maximum basic transmission unit (BTU) size that can be sent on this link station. This attribute is used to negotiate the maximum BTU size that can be transmitted between a link station pair. If the link and node are HPR-capable, then this attribute must be set to a value greater than or equal to 768.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 99..32768  

mscAppnDlciBanLsDefLsRole 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.12
This attribute specifies the role for this link station. This attribute will be ignored if adjacentCpType is set to hostXID0 or hostXID3 (the link station will always be secondary), or if adjacentCpType is set to dlurXID or dlurNoXID (the link station will always be primary).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negotiable(0), primary(1), secondary(2)  

mscAppnDlciBan 1.3.6.1.4.1.562.36.2.1.110.3.7
OBJECT IDENTIFIER    

mscAppnDlciBanRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.3.7.1
This entry controls the addition and deletion of mscAppnDlciBan components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciBanRowStatusEntry

mscAppnDlciBanRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1
A single entry in the table represents a single mscAppnDlciBan component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciBanRowStatusEntry  

mscAppnDlciBanRowStatus 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlciBan components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDlciBanComponentName 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlciBanStorageType 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.4
This variable represents the storage type value for the mscAppnDlciBan tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlciBanIndex 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.10
This variable represents the index for the mscAppnDlciBan tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDlciBanProvTable 1.3.6.1.4.1.562.36.2.1.110.3.7.2
This group contains the provisioning data for the local link address (MAP,SAP pair) to be used for a Frame Relay connection with BAN encapsulation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlciBanProvEntry

mscAppnDlciBanProvEntry 1.3.6.1.4.1.562.36.2.1.110.3.7.2.1
An entry in the mscAppnDlciBanProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlciBanProvEntry  

mscAppnDlciBanLocalMac 1.3.6.1.4.1.562.36.2.1.110.3.7.2.1.1
This attribute specifies the MAC address to be used for a Frame Relay connection with BAN encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DashedHexString Size(6)  

mscAppnDlciBanLocalSap 1.3.6.1.4.1.562.36.2.1.110.3.7.2.1.2
This attribute specifies the local SAP number to be used for a Frame Relay connection with BAN encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

mscAppnLcn 1.3.6.1.4.1.562.36.2.1.110.4
OBJECT IDENTIFIER    

mscAppnLcnRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.4.1
This entry controls the addition and deletion of mscAppnLcn components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnRowStatusEntry

mscAppnLcnRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.4.1.1
A single entry in the table represents a single mscAppnLcn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnRowStatusEntry  

mscAppnLcnRowStatus 1.3.6.1.4.1.562.36.2.1.110.4.1.1.1
This variable is used as the basis for SNMP naming of mscAppnLcn components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnLcnComponentName 1.3.6.1.4.1.562.36.2.1.110.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnLcnStorageType 1.3.6.1.4.1.562.36.2.1.110.4.1.1.4
This variable represents the storage type value for the mscAppnLcn tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnLcnIndex 1.3.6.1.4.1.562.36.2.1.110.4.1.1.10
This variable represents the index for the mscAppnLcn tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4095  

mscAppnLcnStateTable 1.3.6.1.4.1.562.36.2.1.110.4.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnStateEntry

mscAppnLcnStateEntry 1.3.6.1.4.1.562.36.2.1.110.4.10.1
An entry in the mscAppnLcnStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnStateEntry  

mscAppnLcnAdminState 1.3.6.1.4.1.562.36.2.1.110.4.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAppnLcnOperationalState 1.3.6.1.4.1.562.36.2.1.110.4.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAppnLcnUsageState 1.3.6.1.4.1.562.36.2.1.110.4.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAppnLcnDc 1.3.6.1.4.1.562.36.2.1.110.4.2
OBJECT IDENTIFIER    

mscAppnLcnDcRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.4.2.1
This entry controls the addition and deletion of mscAppnLcnDc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnDcRowStatusEntry

mscAppnLcnDcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1
A single entry in the table represents a single mscAppnLcnDc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnDcRowStatusEntry  

mscAppnLcnDcRowStatus 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAppnLcnDc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnLcnDcComponentName 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnLcnDcStorageType 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.4
This variable represents the storage type value for the mscAppnLcnDc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnLcnDcIndex 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.10
This variable represents the index for the mscAppnLcnDc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnLcnDcOptionsTable 1.3.6.1.4.1.562.36.2.1.110.4.2.10
Options group defines attributes associated with direct call. It defines complete connection in terms of path and call options. This connection can be permanent (pvc) or switched (svc). It can have facilities. The total number of bytes of facilities including the facility codes, and all of the facility data from all of the four classes of facilities: CCITT_Facilities DTE_Facilities National_Facilities International_Facilities must not exceed 512 bytes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnDcOptionsEntry

mscAppnLcnDcOptionsEntry 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1
An entry in the mscAppnLcnDcOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnDcOptionsEntry  

mscAppnLcnDcRemoteNpi 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.3
RemoteNumbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnLcnDcRemoteDna 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.4
This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to which this direct call will be sent. Initially, the called DTE address attribute must be present, that is, there must be a valid destination address. However, it may be possible in the future to configure the direct call with a mnemonic address, in which case, this attribute will contain a zero-length Dna, and the mnemonic address will be carried as one of the facilities.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnLcnDcTransferPriority 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.9
This attribute specifies the transfer priority to network for the outgoing calls using this particular LCN. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(9), useDnaDefTP(255)  

mscAppnLcnDcDiscardPriority 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.10
This attribute specifies the discard priority for outgoing call using this LCN. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Traffic with normal priority are discarded first than the traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority. The default of discardPriority is useDnaDefPriority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(1), useDnaDefPriority(3)  

mscAppnLcnVc 1.3.6.1.4.1.562.36.2.1.110.4.3
OBJECT IDENTIFIER    

mscAppnLcnVcRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.4.3.1
This entry controls the addition and deletion of mscAppnLcnVc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnVcRowStatusEntry

mscAppnLcnVcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1
A single entry in the table represents a single mscAppnLcnVc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnVcRowStatusEntry  

mscAppnLcnVcRowStatus 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscAppnLcnVc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnLcnVcComponentName 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnLcnVcStorageType 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.4
This variable represents the storage type value for the mscAppnLcnVc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnLcnVcIndex 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.10
This variable represents the index for the mscAppnLcnVc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnLcnVcCadTable 1.3.6.1.4.1.562.36.2.1.110.4.3.10
This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnVcCadEntry

mscAppnLcnVcCadEntry 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1
An entry in the mscAppnLcnVcCadTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnVcCadEntry  

mscAppnLcnVcType 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.1
This attribute displays the type of call, pvc or svc. type is provided at provisioning time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER svc(0), pvc(1)  

mscAppnLcnVcState 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscAppnLcnVcPreviousState 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscAppnLcnVcDiagnosticCode 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLcnVcPreviousDiagnosticCode 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLcnVcCalledNpi 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnLcnVcCalledDna 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnLcnVcCalledLcn 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

mscAppnLcnVcCallingNpi 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscAppnLcnVcCallingDna 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscAppnLcnVcCallingLcn 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.11
This attribute displays the Logical Channel Number of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

mscAppnLcnVcAccountingEnabled 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

mscAppnLcnVcFastSelectCall 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.13
This attribute displays that this is a fast select call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnLcnVcLocalRxPktSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.14
This attribute displays the locally negotiated size of send packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

mscAppnLcnVcLocalTxPktSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.15
This attribute displays the locally negotiated size of send packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

mscAppnLcnVcLocalTxWindowSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.16
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..127  

mscAppnLcnVcLocalRxWindowSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.17
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..127  

mscAppnLcnVcPathReliability 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.19
This attribute displays the path reliability.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscAppnLcnVcAccountingEnd 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

mscAppnLcnVcPriority 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.21
This attribute displays whether the call is a normal or a high priority call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscAppnLcnVcSegmentSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnLcnVcSubnetTxPktSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.23
This attribute displays the locally negotiated size of the data packets on this Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

mscAppnLcnVcSubnetTxWindowSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.24
This attribute displays the current send window size of Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnLcnVcSubnetRxPktSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.25
This attribute displays the locally negotiated size of receive packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

mscAppnLcnVcSubnetRxWindowSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.26
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnLcnVcMaxSubnetPktSize 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.27
This attribute displays the maximum packet size allowed on Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscAppnLcnVcTransferPriorityToNetwork 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.28
This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

mscAppnLcnVcTransferPriorityFromNetwork 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.29
This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

mscAppnLcnVcIntdTable 1.3.6.1.4.1.562.36.2.1.110.4.3.11
This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnVcIntdEntry

mscAppnLcnVcIntdEntry 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1
An entry in the mscAppnLcnVcIntdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnVcIntdEntry  

mscAppnLcnVcCallReferenceNumber 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.1
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..16777215  

mscAppnLcnVcElapsedTimeTillNow 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscAppnLcnVcSegmentsRx 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscAppnLcnVcSegmentsSent 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscAppnLcnVcStartTime 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

mscAppnLcnVcStatsTable 1.3.6.1.4.1.562.36.2.1.110.4.3.12
... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLcnVcStatsEntry

mscAppnLcnVcStatsEntry 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1
An entry in the mscAppnLcnVcStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLcnVcStatsEntry  

mscAppnLcnVcAckStackingTimeouts 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.1
This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.2
This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcDuplicatesFromSubnet 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.3
This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcFrmRetryTimeouts 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.4
This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcPeakRetryQueueSize 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.5
This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcPeakOoSeqQueueSize 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.6
This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.7
This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcPeakStackedAcksRx 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.8
This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcSubnetRecoveries 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.9
This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcWindowClosuresToSubnet 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.10
This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcWindowClosuresFromSubnet 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.11
This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnLcnVcWrTriggers 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.12
This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscAppnPort 1.3.6.1.4.1.562.36.2.1.110.5
OBJECT IDENTIFIER    

mscAppnPortRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnPort components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnPortRowStatusEntry

mscAppnPortRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.5.1.1
A single entry in the table represents a single mscAppnPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnPortRowStatusEntry  

mscAppnPortRowStatus 1.3.6.1.4.1.562.36.2.1.110.5.1.1.1
This variable is used as the basis for SNMP naming of mscAppnPort components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnPortComponentName 1.3.6.1.4.1.562.36.2.1.110.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnPortStorageType 1.3.6.1.4.1.562.36.2.1.110.5.1.1.4
This variable represents the storage type value for the mscAppnPort tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnPortIndex 1.3.6.1.4.1.562.36.2.1.110.5.1.1.10
This variable represents the index for the mscAppnPort tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

mscAppnPortConfigTable 1.3.6.1.4.1.562.36.2.1.110.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Learned attributes of a SNA Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnPortConfigEntry

mscAppnPortConfigEntry 1.3.6.1.4.1.562.36.2.1.110.5.10.1
An entry in the mscAppnPortConfigTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnPortConfigEntry  

mscAppnPortType 1.3.6.1.4.1.562.36.2.1.110.5.10.1.1
This attribute specifies the type of line used by the port. The possible values are: nonSwitched - switched - sharedAccessFacilities -
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nonSwitched(1), switched(2), sharedAccessFacilities(3)  

mscAppnPortMaxRxBtuSize 1.3.6.1.4.1.562.36.2.1.110.5.10.1.2
This is the maximum basic transmission unit (BTU) size that can be received. The BTU is the unit of data and control information passed between path control components.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnPortMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.5.10.1.3
This is the maximum basic transmission unit (BTU) size that can be sent. The BTU is the unit of data and control information passed between path control components.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnPortTotLinkActLim 1.3.6.1.4.1.562.36.2.1.110.5.10.1.4
This is the total link activation limit. This is the maximum number of active adjacent link stations the port will support. This value limits the number of adjacent link stations that can be concurrently connected to the local node through this port. The limit includes adjacent link stations connected by both inbound and outbound link activations. The distinction of inbound or outbound for link activations is used to indicate which node initiated the connection. For inbound link activations, the adjacent link station initiates the connection with the local link station. For outbound link activations, the local node initiates the connection with the adjacent link station. totLinkActLim must be greater than either inbLinkActLim or outLinkActLim, but it should not greater than the sum of inbLinkActLim and outLinkActLim.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..99  

mscAppnPortInbLinkActLim 1.3.6.1.4.1.562.36.2.1.110.5.10.1.5
This is the inbound link activation limit. This is the maximum number of link stations which can be simultaneously active as a result of connection initiations from adjacent nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..99  

mscAppnPortOutLinkActLim 1.3.6.1.4.1.562.36.2.1.110.5.10.1.6
This is the outbound link activation limit. This is the maximum number of link stations which can be simultaneously active as a result of connection initiations by the local node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..99  

mscAppnPortLsRole 1.3.6.1.4.1.562.36.2.1.110.5.10.1.7
This is the initial role of the port's local link station when communicating with an adjacent link station. The possible options are negotiable, primary and secondary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), negotiable(3)  

mscAppnPortActXidExchLim 1.3.6.1.4.1.562.36.2.1.110.5.10.1.8
This is the exchange limit for activation XIDs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnPortNonactXidExchLim 1.3.6.1.4.1.562.36.2.1.110.5.10.1.9
This is the exchange limit for non-activation XIDs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnPortLsXmitRxCap 1.3.6.1.4.1.562.36.2.1.110.5.10.1.10
This is Link Station transmit/receive capability. This is either tws (two-way simultaneous (full-duplex)) or twa (two-way alternate (half-duplex)).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER twa(0), tws(1)  

mscAppnPortMaxIfrmRxWindow 1.3.6.1.4.1.562.36.2.1.110.5.10.1.11
This is the maximum number of I-frames that can be received by the local link stations before an acknowledgment is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..127  

mscAppnPortTargetPacingCount 1.3.6.1.4.1.562.36.2.1.110.5.10.1.12
This is the desired pacing window size for BINDs on this transmission group. The number is significant only when fixed BIND pacing is being performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnPortOperTable 1.3.6.1.4.1.562.36.2.1.110.5.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational attributes of a SNA Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnPortOperEntry

mscAppnPortOperEntry 1.3.6.1.4.1.562.36.2.1.110.5.11.1
An entry in the mscAppnPortOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnPortOperEntry  

mscAppnPortState 1.3.6.1.4.1.562.36.2.1.110.5.11.1.1
The attribute represents the current operational state of the port. The value can be any of the following: inactive - pendingActive - active - pendingInactive -
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendingActive(2), active(3), pendingInactive(4)  

mscAppnPortDlcType 1.3.6.1.4.1.562.36.2.1.110.5.11.1.2
Type of the DLC interface used by this port. Possible values are: sdlc - synchronous data link control x25 - QLLC logical link control tokenRing - IEEE 802.2 logical link control frameRelay - RFC1490 and IEEE 802.2 logical link control other - dlc type other than those listed above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), sdlc(2), tokenRing(6), frameRelay(30), x25(31)  

mscAppnPortSimRim 1.3.6.1.4.1.562.36.2.1.110.5.11.1.3
This attribute indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mscAppnPortDefinedLsGoodXids 1.3.6.1.4.1.562.36.2.1.110.5.11.1.4
This is the total number of successful XIDs that have been received on all of the defined link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnPortDefinedLsBadXids 1.3.6.1.4.1.562.36.2.1.110.5.11.1.5
This attributes contains the total number of unsuccessful XIDs that have been received on all of the defined link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnPortDynLsGoodXids 1.3.6.1.4.1.562.36.2.1.110.5.11.1.6
This is the total number of successful XIDs that have been received on all of the dynamic link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnPortDynLsBadXids 1.3.6.1.4.1.562.36.2.1.110.5.11.1.7
This is the total number of unsuccessful XIDs that have been received on all of the dynamic link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnPortTgCharTable 1.3.6.1.4.1.562.36.2.1.110.5.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnPortTgCharEntry

mscAppnPortTgCharEntry 1.3.6.1.4.1.562.36.2.1.110.5.12.1
An entry in the mscAppnPortTgCharTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnPortTgCharEntry  

mscAppnPortEffectiveCap 1.3.6.1.4.1.562.36.2.1.110.5.12.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

mscAppnPortConnectCost 1.3.6.1.4.1.562.36.2.1.110.5.12.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnPortByteCost 1.3.6.1.4.1.562.36.2.1.110.5.12.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnPortSecurity 1.3.6.1.4.1.562.36.2.1.110.5.12.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

mscAppnPortPropagationDelay 1.3.6.1.4.1.562.36.2.1.110.5.12.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

mscAppnPortUserDefinedParm1 1.3.6.1.4.1.562.36.2.1.110.5.12.1.7
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnPortUserDefinedParm2 1.3.6.1.4.1.562.36.2.1.110.5.12.1.8
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnPortUserDefinedParm3 1.3.6.1.4.1.562.36.2.1.110.5.12.1.9
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLs 1.3.6.1.4.1.562.36.2.1.110.6
OBJECT IDENTIFIER    

mscAppnLsRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.6.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnLs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLsRowStatusEntry

mscAppnLsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.6.1.1
A single entry in the table represents a single mscAppnLs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLsRowStatusEntry  

mscAppnLsRowStatus 1.3.6.1.4.1.562.36.2.1.110.6.1.1.1
This variable is used as the basis for SNMP naming of mscAppnLs components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnLsComponentName 1.3.6.1.4.1.562.36.2.1.110.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnLsStorageType 1.3.6.1.4.1.562.36.2.1.110.6.1.1.4
This variable represents the storage type value for the mscAppnLs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnLsIndex 1.3.6.1.4.1.562.36.2.1.110.6.1.1.10
This variable represents the index for the mscAppnLs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

mscAppnLsLsVcReferenceTable 1.3.6.1.4.1.562.36.2.1.110.6.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This identifies which physical interface is associated with this link station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLsLsVcReferenceEntry

mscAppnLsLsVcReferenceEntry 1.3.6.1.4.1.562.36.2.1.110.6.10.1
An entry in the mscAppnLsLsVcReferenceTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLsLsVcReferenceEntry  

mscAppnLsName 1.3.6.1.4.1.562.36.2.1.110.6.10.1.1
This string identifies which physical interface the link station is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAppnLsSap 1.3.6.1.4.1.562.36.2.1.110.6.10.1.2
This attribute indicates the SAP number of the device assigned to this link station. This field is only valid for dlcType of llc2. If the dlcType is not llc2, this field will be 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..252  

mscAppnLsConfigTable 1.3.6.1.4.1.562.36.2.1.110.6.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the attributes that define the behavior of a SNA link station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLsConfigEntry

mscAppnLsConfigEntry 1.3.6.1.4.1.562.36.2.1.110.6.11.1
An entry in the mscAppnLsConfigTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLsConfigEntry  

mscAppnLsPortName 1.3.6.1.4.1.562.36.2.1.110.6.11.1.1
This attribute contains the name of the port associated with this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnLsFeatures 1.3.6.1.4.1.562.36.2.1.110.6.11.1.4
Various optional features of a link station. autoActSupp If present specifies that the link can be activated automatically when required by a session. A link cannot be automatically activated from an independent LU session unless it has been started previously. The link cannot be defined to support CP-CP sessions and to be auto-activatable because this might cause inconsistent network behavior. limitedResource If present, specifies that this link station is to be deactivated when there are no sessions using the link. Note that link stations on a non- switched port cannot be configured as limited resource. backLvlLenEn If present, specifies that this link is to a back level LEN End Node. cpCpSessSupport If present, specifies that CP-CP sessions are supported by this link station. Description of bits: autoActSupp(0) limitedResource(1) backLvlLenEn(2) cpCpSessSupport(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnLsMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.6.11.1.6
This is the maximum basic transmission unit (BTU) size that can be sent. The BTU is the unit of data and control information passed between path control components.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..32767  

mscAppnLsOperTable 1.3.6.1.4.1.562.36.2.1.110.6.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational data of the link station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLsOperEntry

mscAppnLsOperEntry 1.3.6.1.4.1.562.36.2.1.110.6.12.1
An entry in the mscAppnLsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLsOperEntry  

mscAppnLsDlcType 1.3.6.1.4.1.562.36.2.1.110.6.12.1.1
This attribute indicates the type of data link control that this LS is associated. Possible types are: sdlc - synchronous data link control x25 - QLLC logical link control tokenRing - IEEE 802.2 logical link control llc2 - RFC1490 and IEEE 802.2 logical link control. other - dlc type other than those listed above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), sdlc(2), tokenRing(6), llc2(30), x25(31)  

mscAppnLsLinkStationState 1.3.6.1.4.1.562.36.2.1.110.6.12.1.2
This the current state of the link station. The possible values are: inactive - active - pendingActive - pendingInactive -
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendingActive(2), active(3), pendingInactive(4)  

mscAppnLsLinkStationSubState 1.3.6.1.4.1.562.36.2.1.110.6.12.1.3
This is the current sub-state of the link station. The possible values are: inactive, sentReqOpnstn, pendXidExch, sentActAs, sendSetMode, active, sentDeactAsOrd, sentDiscOrd, sentDestroyTg, sentCreateTg, sentConnReq,pendRcvConnInd, pendSendConnRsp, sentConnRsp, pendDeact. These are described in the APPN Architecture reference
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), sentReqOpnstn(2), pendXidExch(3), sentActAs(4), sentSentMode(5), active(6), sentDeactAsOrd(7), sentDiscOrd(8), sentDestroyTg(9), sentCreateTg(10), sentConnReq(11), pendRcvConnInd(12), pendSendConnRsp(13), sentConnRsp(14), pendDeact(15)  

mscAppnLsActSessCount 1.3.6.1.4.1.562.36.2.1.110.6.12.1.4
This is the total number of active sessions (both endpoint and intermediate) using this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..65535  

mscAppnLsActualCpName 1.3.6.1.4.1.562.36.2.1.110.6.12.1.5
This is the actual network qualified adjacent control point (CP) name as determined from the XID 3 exchange.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(3..17)  

mscAppnLsActualCpType 1.3.6.1.4.1.562.36.2.1.110.6.12.1.6
This is the actual type of adjacent node type as determined during contact negotiation. The possible types are: endNode lowEntryNode networkNode toBeDetermine
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER toBeDetermined(0), networkNode(1), endNode(2), lowEntryNode(4)  

mscAppnLsDlcName 1.3.6.1.4.1.562.36.2.1.110.6.12.1.7
This is the name of the port group associated with the port through which this link station is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnLsDynamicOrDefined 1.3.6.1.4.1.562.36.2.1.110.6.12.1.8
This attribute reflects whether the link was created explicitly or dynamically (either in response to a connection request from the adjacent node, or to connect dynamically to another node across a connection network). The possible values are dynamic or defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), defined(2)  

mscAppnLsMigration 1.3.6.1.4.1.562.36.2.1.110.6.12.1.9
This attribute specifies whether the adjacent node is a migration level node, such as a low entry networking or LEN node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2), unknown(3)  

mscAppnLsTgNum 1.3.6.1.4.1.562.36.2.1.110.6.12.1.10
This is the number associated with the transmission group using this link station. It can be used to distinguish it from other transmission groups to the same adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLsHprSupport 1.3.6.1.4.1.562.36.2.1.110.6.12.1.11
This is the type of High Performance Routing (HPR) being used on this link station. It is one of anr, rtp or none. The value in this attribute are bounded by the values provisioned on this node and the attached node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), anr(1), rtp(2)  

mscAppnLsAnrLabel 1.3.6.1.4.1.562.36.2.1.110.6.12.1.12
This is the HPR ANR label associated with this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..65535  

mscAppnLsTgCharTable 1.3.6.1.4.1.562.36.2.1.110.6.13
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLsTgCharEntry

mscAppnLsTgCharEntry 1.3.6.1.4.1.562.36.2.1.110.6.13.1
An entry in the mscAppnLsTgCharTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLsTgCharEntry  

mscAppnLsEffectiveCap 1.3.6.1.4.1.562.36.2.1.110.6.13.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

mscAppnLsConnectCost 1.3.6.1.4.1.562.36.2.1.110.6.13.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnLsByteCost 1.3.6.1.4.1.562.36.2.1.110.6.13.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnLsSecurity 1.3.6.1.4.1.562.36.2.1.110.6.13.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

mscAppnLsPropagationDelay 1.3.6.1.4.1.562.36.2.1.110.6.13.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

mscAppnLsUserDefinedParm1 1.3.6.1.4.1.562.36.2.1.110.6.13.1.7
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLsUserDefinedParm2 1.3.6.1.4.1.562.36.2.1.110.6.13.1.8
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLsUserDefinedParm3 1.3.6.1.4.1.562.36.2.1.110.6.13.1.9
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLsStatsTable 1.3.6.1.4.1.562.36.2.1.110.6.14
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics of the link station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLsStatsEntry

mscAppnLsStatsEntry 1.3.6.1.4.1.562.36.2.1.110.6.14.1
An entry in the mscAppnLsStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLsStatsEntry  

mscAppnLsInXidBytes 1.3.6.1.4.1.562.36.2.1.110.6.14.1.1
This attribute counts the total number of XID bytes received on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsInMsgBytes 1.3.6.1.4.1.562.36.2.1.110.6.14.1.2
This attribute counts the total number of message (I-frame) bytes received on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsInXidFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.3
This attribute counts the total number of XID frames received on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsInMsgFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.4
This attribute counts the total number of message (I-frame) frames received on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsOutXidBytes 1.3.6.1.4.1.562.36.2.1.110.6.14.1.5
This attribute counts the total number of XID bytes sent on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsOutMsgBytes 1.3.6.1.4.1.562.36.2.1.110.6.14.1.6
This attribute counts the total number of message (I-frame) bytes sent on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsOutXidFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.7
This attribute counts the total number of XID frames sent on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsOutMsgFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.8
This attribute counts the total number of message (I-frame) frames sent on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsInInvalidSnaFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.9
This attribute counts the total number of invalid SNA frames received on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsInSessionControlFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.10
This attribute counts the total number of session control frames received on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsOutSessionControlFrames 1.3.6.1.4.1.562.36.2.1.110.6.14.1.11
This attribute counts the total number of session control frames sent on this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsEchoResponse 1.3.6.1.4.1.562.36.2.1.110.6.14.1.12
This attribute counts the total number of echo responses returned from the adjacent node. A response should be returned for each test frame sent by this node. Echo requests are sent periodically to gauge the propagation delay to the adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsCurrentDelay 1.3.6.1.4.1.562.36.2.1.110.6.14.1.13
This attribute counts the time (in milliseconds) that it took for the last test signal to be sent and returned from this link station to the adjacent link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsMaxDelay 1.3.6.1.4.1.562.36.2.1.110.6.14.1.14
This is the longest time taken (in milliseconds) for a test signal to be sent and returned from this link station to the adjacent link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsMinDelay 1.3.6.1.4.1.562.36.2.1.110.6.14.1.15
This is the shortest time taken (in milliseconds) for a test signal to be sent and returned from this link station to the adjacent link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsGoodXids 1.3.6.1.4.1.562.36.2.1.110.6.14.1.17
This attribute contains the total number of successful XIDs that have been received on this link station since it was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnLsBadXids 1.3.6.1.4.1.562.36.2.1.110.6.14.1.18
This attribute contains the total number of unsuccessful XIDs that have been received on this link station since it was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDirEnt 1.3.6.1.4.1.562.36.2.1.110.7
OBJECT IDENTIFIER    

mscAppnDirEntRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.7.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDirEnt components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDirEntRowStatusEntry

mscAppnDirEntRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.7.1.1
A single entry in the table represents a single mscAppnDirEnt component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDirEntRowStatusEntry  

mscAppnDirEntRowStatus 1.3.6.1.4.1.562.36.2.1.110.7.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDirEnt components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDirEntComponentName 1.3.6.1.4.1.562.36.2.1.110.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDirEntStorageType 1.3.6.1.4.1.562.36.2.1.110.7.1.1.4
This variable represents the storage type value for the mscAppnDirEnt tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDirEntIndex 1.3.6.1.4.1.562.36.2.1.110.7.1.1.10
This variable represents the index for the mscAppnDirEnt tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..17)  

mscAppnDirEntOperTable 1.3.6.1.4.1.562.36.2.1.110.7.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines the attributes of the Directory Entry server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDirEntOperEntry

mscAppnDirEntOperEntry 1.3.6.1.4.1.562.36.2.1.110.7.10.1
An entry in the mscAppnDirEntOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDirEntOperEntry  

mscAppnDirEntServerName 1.3.6.1.4.1.562.36.2.1.110.7.10.1.1
The fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully- qualified name is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(3..17)  

mscAppnDirEntLuOwnerName 1.3.6.1.4.1.562.36.2.1.110.7.10.1.2
It is the fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(3..17)  

mscAppnDirEntLocation 1.3.6.1.4.1.562.36.2.1.110.7.10.1.3
Specifies the location of the resource. This may be one of the following: The resource is at the local node. The resource belongs to an attached end node. The resource is not within the domain of the local node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(0), domain(1), xdomain(2)  

mscAppnDirEntEntryType 1.3.6.1.4.1.562.36.2.1.110.7.10.1.4
Specifies whether the type of the directory entry is: cache - The LU has previously been located by a broadcast search and the location information has been saved. home - The LU is in the domain of the local network node and the LU information has been configured at the local node. register - The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cache(0), register(2), home(3)  

mscAppnDirEntWildCard 1.3.6.1.4.1.562.36.2.1.110.7.10.1.5
It indicates the type of wildcard used for the resources used for LEN node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), explicit(2), partialWildcard(3), fullWildcard(4)  

mscAppnAdjNn 1.3.6.1.4.1.562.36.2.1.110.8
OBJECT IDENTIFIER    

mscAppnAdjNnRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.8.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnAdjNn components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnAdjNnRowStatusEntry

mscAppnAdjNnRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.8.1.1
A single entry in the table represents a single mscAppnAdjNn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnAdjNnRowStatusEntry  

mscAppnAdjNnRowStatus 1.3.6.1.4.1.562.36.2.1.110.8.1.1.1
This variable is used as the basis for SNMP naming of mscAppnAdjNn components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnAdjNnComponentName 1.3.6.1.4.1.562.36.2.1.110.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnAdjNnStorageType 1.3.6.1.4.1.562.36.2.1.110.8.1.1.4
This variable represents the storage type value for the mscAppnAdjNn tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnAdjNnIndex 1.3.6.1.4.1.562.36.2.1.110.8.1.1.10
This variable represents the index for the mscAppnAdjNn tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..17)  

mscAppnAdjNnOperTable 1.3.6.1.4.1.562.36.2.1.110.8.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These operational attributes are only available for network nodes which are directly attached to the current node. They are in a separate group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnAdjNnOperEntry

mscAppnAdjNnOperEntry 1.3.6.1.4.1.562.36.2.1.110.8.10.1
An entry in the mscAppnAdjNnOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnAdjNnOperEntry  

mscAppnAdjNnCpCpSessStatus 1.3.6.1.4.1.562.36.2.1.110.8.10.1.1
Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Inactive indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessions are active using both the ConWinner and ConLoser sessions. The session initiated by this node is referred to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoser session is initiated by the adjacent node and is used by this node to receive from the adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), conLoserActive(2), conWinnerActive(3), inactive(4)  

mscAppnAdjNnOutOfSeqTdus 1.3.6.1.4.1.562.36.2.1.110.8.10.1.2
Number of out of sequence topology database updates (TDU) received from this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnAdjNnLastFrsnSent 1.3.6.1.4.1.562.36.2.1.110.8.10.1.3
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnAdjNnLastFrsnReceived 1.3.6.1.4.1.562.36.2.1.110.8.10.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnNn 1.3.6.1.4.1.562.36.2.1.110.9
OBJECT IDENTIFIER    

mscAppnNnRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.9.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnNn components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnNnRowStatusEntry

mscAppnNnRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.9.1.1
A single entry in the table represents a single mscAppnNn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnNnRowStatusEntry  

mscAppnNnRowStatus 1.3.6.1.4.1.562.36.2.1.110.9.1.1.1
This variable is used as the basis for SNMP naming of mscAppnNn components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnNnComponentName 1.3.6.1.4.1.562.36.2.1.110.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnNnStorageType 1.3.6.1.4.1.562.36.2.1.110.9.1.1.4
This variable represents the storage type value for the mscAppnNn tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnNnIndex 1.3.6.1.4.1.562.36.2.1.110.9.1.1.10
This variable represents the index for the mscAppnNn tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..17)  

mscAppnNnOperTable 1.3.6.1.4.1.562.36.2.1.110.9.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational attributes of a network node in the topology database.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnNnOperEntry

mscAppnNnOperEntry 1.3.6.1.4.1.562.36.2.1.110.9.10.1
An entry in the mscAppnNnOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnNnOperEntry  

mscAppnNnDaysLeft 1.3.6.1.4.1.562.36.2.1.110.9.10.1.2
The number of days before deletion of this node entry from the Topology Database. This is set to zero for the local node entry, which always exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..15  

mscAppnNnNodeType 1.3.6.1.4.1.562.36.2.1.110.9.10.1.3
Type of the APPN node. Possible values are networkNode (nn) and virtualRoutingNode (vrn).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER toBeDetermined(0), networkNode(1), virtualRoutingNode(3)  

mscAppnNnResourceSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.9.10.1.4
Resource sequence number. This is assigned by the network node that owns this resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnNnRouteAdditionResistance 1.3.6.1.4.1.562.36.2.1.110.9.10.1.5
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. This value is used for route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnNnStatus 1.3.6.1.4.1.562.36.2.1.110.9.10.1.6
This attribute specifies the status of the node. This may be one or more of the following: congested - If present, indicates that this node is congested. This node is not be included in route selection by other nodes when this congestion exists. irrDepleted - If present, indicates that intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted. SNMP APPN MIB = ibmappnNnNodeIsrDepleted errDepleted - If present, indicates that session endpoint resources are depleted. quiescing - If present, indicates that the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. Description of bits: congested(0) irrDepleted(1) errDepleted(2) quiescing(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnNnFunctionSupported 1.3.6.1.4.1.562.36.2.1.110.9.10.1.7
This attribute specifies which functions are supported. This may be one or more of the following: borderNode - If present, indicates that border node functionality is supported. centralDirectoryServer -If present, indicates that the node is a central directory. gateway - If present, indicates that the node provides gateway functions. isr - If present, indicates that the node supports intermediate session routing. Description of bits: notused0(0) gateway(1) centralDirectoryServer(2) hpr(3) rtp(4) isr(5) borderNode(6)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnLocTg 1.3.6.1.4.1.562.36.2.1.110.10
OBJECT IDENTIFIER    

mscAppnLocTgRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.10.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnLocTg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLocTgRowStatusEntry

mscAppnLocTgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.10.1.1
A single entry in the table represents a single mscAppnLocTg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLocTgRowStatusEntry  

mscAppnLocTgRowStatus 1.3.6.1.4.1.562.36.2.1.110.10.1.1.1
This variable is used as the basis for SNMP naming of mscAppnLocTg components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnLocTgComponentName 1.3.6.1.4.1.562.36.2.1.110.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnLocTgStorageType 1.3.6.1.4.1.562.36.2.1.110.10.1.1.4
This variable represents the storage type value for the mscAppnLocTg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnLocTgDestFqcpNameIndex 1.3.6.1.4.1.562.36.2.1.110.10.1.1.10
This variable represents an index for the mscAppnLocTg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(3..17)  

mscAppnLocTgTransmissionGroupIndex 1.3.6.1.4.1.562.36.2.1.110.10.1.1.11
This variable represents an index for the mscAppnLocTg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

mscAppnLocTgOperTable 1.3.6.1.4.1.562.36.2.1.110.10.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Gives the operational status of the local node transmission group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLocTgOperEntry

mscAppnLocTgOperEntry 1.3.6.1.4.1.562.36.2.1.110.10.10.1
An entry in the mscAppnLocTgOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLocTgOperEntry  

mscAppnLocTgStatus 1.3.6.1.4.1.562.36.2.1.110.10.10.1.1
Status of the transmission group can be one of operational, CpCpSession or quiescing. Description of bits: notused0(0) notused1(1) notused2(2) notused3(3) cpCpSession(4) quiescing(5) notused6(6) operational(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnLocTgResourceSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.10.10.1.2
This attribute contains the resource sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnLocTgLinkAddressTable 1.3.6.1.4.1.562.36.2.1.110.10.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Contains the attribute for destination address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLocTgLinkAddressEntry

mscAppnLocTgLinkAddressEntry 1.3.6.1.4.1.562.36.2.1.110.10.11.1
An entry in the mscAppnLocTgLinkAddressTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLocTgLinkAddressEntry  

mscAppnLocTgDlcData 1.3.6.1.4.1.562.36.2.1.110.10.11.1.1
This attribute contains specific data related to the link connection. Token-Ring - contains MAC/SAP X.25 Switched - contains dial digits X.21 Switched - contains dial digits Circuit Switched - contains dial digits Frame-Relay - contains DLCI and SAP The value will be set to zero if the destination node type is not a virtual routing node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..32)  

mscAppnLocTgTgCharTable 1.3.6.1.4.1.562.36.2.1.110.10.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnLocTgTgCharEntry

mscAppnLocTgTgCharEntry 1.3.6.1.4.1.562.36.2.1.110.10.12.1
An entry in the mscAppnLocTgTgCharTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnLocTgTgCharEntry  

mscAppnLocTgEffectiveCap 1.3.6.1.4.1.562.36.2.1.110.10.12.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

mscAppnLocTgConnectCost 1.3.6.1.4.1.562.36.2.1.110.10.12.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnLocTgByteCost 1.3.6.1.4.1.562.36.2.1.110.10.12.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnLocTgSecurity 1.3.6.1.4.1.562.36.2.1.110.10.12.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

mscAppnLocTgPropagationDelay 1.3.6.1.4.1.562.36.2.1.110.10.12.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

mscAppnLocTgUserDefinedParm1 1.3.6.1.4.1.562.36.2.1.110.10.12.1.7
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLocTgUserDefinedParm2 1.3.6.1.4.1.562.36.2.1.110.10.12.1.8
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnLocTgUserDefinedParm3 1.3.6.1.4.1.562.36.2.1.110.10.12.1.9
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnIsrSess 1.3.6.1.4.1.562.36.2.1.110.11
OBJECT IDENTIFIER    

mscAppnIsrSessRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.11.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnIsrSess components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnIsrSessRowStatusEntry

mscAppnIsrSessRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.11.1.1
A single entry in the table represents a single mscAppnIsrSess component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnIsrSessRowStatusEntry  

mscAppnIsrSessRowStatus 1.3.6.1.4.1.562.36.2.1.110.11.1.1.1
This variable is used as the basis for SNMP naming of mscAppnIsrSess components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnIsrSessComponentName 1.3.6.1.4.1.562.36.2.1.110.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnIsrSessStorageType 1.3.6.1.4.1.562.36.2.1.110.11.1.1.4
This variable represents the storage type value for the mscAppnIsrSess tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnIsrSessFqcpNameIndex 1.3.6.1.4.1.562.36.2.1.110.11.1.1.10
This variable represents an index for the mscAppnIsrSess tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(3..17)  

mscAppnIsrSessProcedureCorrelationIdIndex 1.3.6.1.4.1.562.36.2.1.110.11.1.1.11
This variable represents an index for the mscAppnIsrSess tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(8)  

mscAppnIsrSessOperTable 1.3.6.1.4.1.562.36.2.1.110.11.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains dynamic information about an intermediate session for which the network node is providing transit routing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnIsrSessOperEntry

mscAppnIsrSessOperEntry 1.3.6.1.4.1.562.36.2.1.110.11.10.1
An entry in the mscAppnIsrSessOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnIsrSessOperEntry  

mscAppnIsrSessTransmissionPriority 1.3.6.1.4.1.562.36.2.1.110.11.10.1.1
This attribute contains the transmission priority. This is one of low, medium, high or network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

mscAppnIsrSessCosName 1.3.6.1.4.1.562.36.2.1.110.11.10.1.2
This is the class of service used to select the route. Class of service (COS) is a designation of the transport network characteristics, such as route security, transmission priority, and bandwidth, needed for a particular session. The class of service is derived from the mode name specified by the initiator of the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnIsrSessLimitedResource 1.3.6.1.4.1.562.36.2.1.110.11.10.1.3
This attribute specifies whether the session uses a limited resource link. A limited resource link remains active only when being used and is deactivated when session traffic ceases.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mscAppnIsrSessPriStats 1.3.6.1.4.1.562.36.2.1.110.11.100
OBJECT IDENTIFIER    

mscAppnIsrSessPriStatsRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.11.100.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnIsrSessPriStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnIsrSessPriStatsRowStatusEntry

mscAppnIsrSessPriStatsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1
A single entry in the table represents a single mscAppnIsrSessPriStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnIsrSessPriStatsRowStatusEntry  

mscAppnIsrSessPriStatsRowStatus 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.1
This variable is used as the basis for SNMP naming of mscAppnIsrSessPriStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnIsrSessPriStatsComponentName 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnIsrSessPriStatsStorageType 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.4
This variable represents the storage type value for the mscAppnIsrSessPriStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnIsrSessPriStatsIndex 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.10
This variable represents the index for the mscAppnIsrSessPriStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnIsrSessPriStatsStatsTable 1.3.6.1.4.1.562.36.2.1.110.11.100.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnIsrSessPriStatsStatsEntry

mscAppnIsrSessPriStatsStatsEntry 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1
An entry in the mscAppnIsrSessPriStatsStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnIsrSessPriStatsStatsEntry  

mscAppnIsrSessPriStatsRxRuSize 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrSessPriStatsMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrSessPriStatsMaxRxBtuSize 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrSessPriStatsMaxTxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.4
This is the maximum size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessPriStatsCurTxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.5
This is the current size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessPriStatsMaxRxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.6
This is the maximum size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessPriStatsCurRxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.7
This is the current size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessPriStatsTxDataframes 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessPriStatsTxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessPriStatsTxDataBytes 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessPriStatsRxDataFrames 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessPriStatsRxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessPriStatsRxDataBytes 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessPriStatsSidh 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.14
This attribute contains the session identifier high byte on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnIsrSessPriStatsSidl 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.15
This attribute contains the session ID low byte on the SSCP session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnIsrSessPriStatsOdai 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

mscAppnIsrSessPriStatsLsName 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnIsrSessSecStats 1.3.6.1.4.1.562.36.2.1.110.11.101
OBJECT IDENTIFIER    

mscAppnIsrSessSecStatsRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.11.101.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnIsrSessSecStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnIsrSessSecStatsRowStatusEntry

mscAppnIsrSessSecStatsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1
A single entry in the table represents a single mscAppnIsrSessSecStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnIsrSessSecStatsRowStatusEntry  

mscAppnIsrSessSecStatsRowStatus 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.1
This variable is used as the basis for SNMP naming of mscAppnIsrSessSecStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnIsrSessSecStatsComponentName 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnIsrSessSecStatsStorageType 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.4
This variable represents the storage type value for the mscAppnIsrSessSecStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnIsrSessSecStatsIndex 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.10
This variable represents the index for the mscAppnIsrSessSecStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnIsrSessSecStatsStatsTable 1.3.6.1.4.1.562.36.2.1.110.11.101.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnIsrSessSecStatsStatsEntry

mscAppnIsrSessSecStatsStatsEntry 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1
An entry in the mscAppnIsrSessSecStatsStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnIsrSessSecStatsStatsEntry  

mscAppnIsrSessSecStatsRxRuSize 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrSessSecStatsMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrSessSecStatsMaxRxBtuSize 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnIsrSessSecStatsMaxTxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.4
This is the maximum size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessSecStatsCurTxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.5
This is the current size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessSecStatsMaxRxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.6
This is the maximum size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessSecStatsCurRxPacWin 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.7
This is the current size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnIsrSessSecStatsTxDataframes 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessSecStatsTxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessSecStatsTxDataBytes 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessSecStatsRxDataFrames 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessSecStatsRxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessSecStatsRxDataBytes 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnIsrSessSecStatsSidh 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.14
This attribute contains the session identifier high byte on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnIsrSessSecStatsSidl 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.15
This attribute contains the session ID low byte on the SSCP session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnIsrSessSecStatsOdai 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

mscAppnIsrSessSecStatsLsName 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnNnTg 1.3.6.1.4.1.562.36.2.1.110.12
OBJECT IDENTIFIER    

mscAppnNnTgRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.12.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnNnTg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnNnTgRowStatusEntry

mscAppnNnTgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.12.1.1
A single entry in the table represents a single mscAppnNnTg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnNnTgRowStatusEntry  

mscAppnNnTgRowStatus 1.3.6.1.4.1.562.36.2.1.110.12.1.1.1
This variable is used as the basis for SNMP naming of mscAppnNnTg components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnNnTgComponentName 1.3.6.1.4.1.562.36.2.1.110.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnNnTgStorageType 1.3.6.1.4.1.562.36.2.1.110.12.1.1.4
This variable represents the storage type value for the mscAppnNnTg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnNnTgOwnerFqcpNameIndex 1.3.6.1.4.1.562.36.2.1.110.12.1.1.10
This variable represents an index for the mscAppnNnTg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(3..17)  

mscAppnNnTgDestFqcpNameIndex 1.3.6.1.4.1.562.36.2.1.110.12.1.1.11
This variable represents an index for the mscAppnNnTg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(3..17)  

mscAppnNnTgTransmissionGroupIndex 1.3.6.1.4.1.562.36.2.1.110.12.1.1.12
This variable represents an index for the mscAppnNnTg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

mscAppnNnTgOperTable 1.3.6.1.4.1.562.36.2.1.110.12.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational status of the transmission group entry in the topology database.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnNnTgOperEntry

mscAppnNnTgOperEntry 1.3.6.1.4.1.562.36.2.1.110.12.10.1
An entry in the mscAppnNnTgOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnNnTgOperEntry  

mscAppnNnTgFlowReductionSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.12.10.1.1
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. SNMP APPN MIB = ibmappnNnTgFrsn
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnNnTgDaysLeft 1.3.6.1.4.1.562.36.2.1.110.12.10.1.2
Number of days left until entry purged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..15  

mscAppnNnTgResourceSequenceNumber 1.3.6.1.4.1.562.36.2.1.110.12.10.1.3
Resource sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnNnTgStatus 1.3.6.1.4.1.562.36.2.1.110.12.10.1.4
This attribute contains status information about the transmission group from the topology database. It can be any combination of the following: operational If present indicates that the transmission group is operational. CpCpSessions If present, indicates that CP-CP sessions are supported on this transmission group. quiescing If present, indicates that the transmission group is quiescing. Description of bits: notused0(0) notused1(1) notused2(2) notused3(3) cpCpSessions(4) quiescing(5) notused6(6) operational(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAppnNnTgLinkAddressTable 1.3.6.1.4.1.562.36.2.1.110.12.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Contains the attribute for destination address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnNnTgLinkAddressEntry

mscAppnNnTgLinkAddressEntry 1.3.6.1.4.1.562.36.2.1.110.12.11.1
An entry in the mscAppnNnTgLinkAddressTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnNnTgLinkAddressEntry  

mscAppnNnTgDlcData 1.3.6.1.4.1.562.36.2.1.110.12.11.1.1
This attribute contains specific data related to the link connection. Token-Ring - contains MAC/SAP X.25 Switched - contains dial digits X.21 Switched - contains dial digits Circuit Switched - contains dial digits Frame-Relay - contains DLCI and SAP The value will be set to zero if the destination node type is not a virtual routing node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..32)  

mscAppnNnTgTgCharTable 1.3.6.1.4.1.562.36.2.1.110.12.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnNnTgTgCharEntry

mscAppnNnTgTgCharEntry 1.3.6.1.4.1.562.36.2.1.110.12.12.1
An entry in the mscAppnNnTgTgCharTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnNnTgTgCharEntry  

mscAppnNnTgEffectiveCap 1.3.6.1.4.1.562.36.2.1.110.12.12.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

mscAppnNnTgConnectCost 1.3.6.1.4.1.562.36.2.1.110.12.12.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnNnTgByteCost 1.3.6.1.4.1.562.36.2.1.110.12.12.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnNnTgSecurity 1.3.6.1.4.1.562.36.2.1.110.12.12.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

mscAppnNnTgPropagationDelay 1.3.6.1.4.1.562.36.2.1.110.12.12.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

mscAppnNnTgUserDefinedParm1 1.3.6.1.4.1.562.36.2.1.110.12.12.1.7
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnNnTgUserDefinedParm2 1.3.6.1.4.1.562.36.2.1.110.12.12.1.8
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnNnTgUserDefinedParm3 1.3.6.1.4.1.562.36.2.1.110.12.12.1.9
This is the user defined routing parameter in range 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAppnRtp 1.3.6.1.4.1.562.36.2.1.110.13
OBJECT IDENTIFIER    

mscAppnRtpRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.13.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnRtp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnRtpRowStatusEntry

mscAppnRtpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.13.1.1
A single entry in the table represents a single mscAppnRtp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnRtpRowStatusEntry  

mscAppnRtpRowStatus 1.3.6.1.4.1.562.36.2.1.110.13.1.1.1
This variable is used as the basis for SNMP naming of mscAppnRtp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnRtpComponentName 1.3.6.1.4.1.562.36.2.1.110.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnRtpStorageType 1.3.6.1.4.1.562.36.2.1.110.13.1.1.4
This variable represents the storage type value for the mscAppnRtp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnRtpIndex 1.3.6.1.4.1.562.36.2.1.110.13.1.1.10
This variable represents the index for the mscAppnRtp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

mscAppnRtpOperTable 1.3.6.1.4.1.562.36.2.1.110.13.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational data for the High Performance Routing-Rapid Transport Protocol pipe
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnRtpOperEntry

mscAppnRtpOperEntry 1.3.6.1.4.1.562.36.2.1.110.13.10.1
An entry in the mscAppnRtpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnRtpOperEntry  

mscAppnRtpLocalLsName 1.3.6.1.4.1.562.36.2.1.110.13.10.1.1
This is the name of the local link station associated with this High Performance Routing-Rapid Transport Protocol pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnRtpRemoteCpName 1.3.6.1.4.1.562.36.2.1.110.13.10.1.2
This is the CP name of the node at the other end of the High Performance Routing-Rapid Transport Protocol pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..17)  

mscAppnRtpCosName 1.3.6.1.4.1.562.36.2.1.110.13.10.1.3
This is the name of the Class of Service associated with this High Performance Routing-Rapid Transport Protocol pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnRtpActiveSessions 1.3.6.1.4.1.562.36.2.1.110.13.10.1.4
The number of active sessions using this High Performance Routing-Rapid Transport Protocol pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnRtpLocalTcid 1.3.6.1.4.1.562.36.2.1.110.13.10.1.5
The Transport Connection Identifier (TCID) assigned to this HPR RTP pipe by the local node
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(8)  

mscAppnRtpRemoteTcid 1.3.6.1.4.1.562.36.2.1.110.13.10.1.6
The Transport Connection Identifier (TCID) assigned to this HPR RTP pipe by the remote node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(8)  

mscAppnRtpIdleTimer 1.3.6.1.4.1.562.36.2.1.110.13.10.1.7
The idle timer of this High Performance Routing-Rapid Transport Protocol pipe (in seconds)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAppnRtpMaxBtuSize 1.3.6.1.4.1.562.36.2.1.110.13.10.1.8
The maximum BTU size (the length of the information field in a frame) of the High Performance Routing-Rapid Transport Protocol pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnRtpStatsTable 1.3.6.1.4.1.562.36.2.1.110.13.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistics and counters for the High Performance Routing-Rapid Transport Protocol pipe.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnRtpStatsEntry

mscAppnRtpStatsEntry 1.3.6.1.4.1.562.36.2.1.110.13.11.1
An entry in the mscAppnRtpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnRtpStatsEntry  

mscAppnRtpTxBytes 1.3.6.1.4.1.562.36.2.1.110.13.11.1.1
This attribute is the total number of bytes sent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpRxBytes 1.3.6.1.4.1.562.36.2.1.110.13.11.1.2
This attribute is the total number of bytes received on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpBytesResent 1.3.6.1.4.1.562.36.2.1.110.13.11.1.3
This attribute counts the total number of bytes resent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpBytesDiscarded 1.3.6.1.4.1.562.36.2.1.110.13.11.1.4
This attribute counts the total number of bytes discarded on this High Performance Routing-Rapid Transport Protocol pipe. High numbers of discarded bytes may indicate a problem in the APPN network. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpPktTx 1.3.6.1.4.1.562.36.2.1.110.13.11.1.5
This attribute counts the total number of packets sent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpPktRx 1.3.6.1.4.1.562.36.2.1.110.13.11.1.6
This attribute counts the total number of packets received on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpPktResent 1.3.6.1.4.1.562.36.2.1.110.13.11.1.7
This attribute counts the total number of packets resent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpPktDiscard 1.3.6.1.4.1.562.36.2.1.110.13.11.1.8
This attribute counts the total number of packets discarded on this High Performance Routing-Rapid Transport Protocol pipe. Large numbers of discarded packets may indicate a problem in the APPN network. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpLostFrames 1.3.6.1.4.1.562.36.2.1.110.13.11.1.9
This attribute counts the number of lost frames detected on this pipe. Excessive numbers of lost frames may indicate a problem in the APPN network. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpCurTxRate 1.3.6.1.4.1.562.36.2.1.110.13.11.1.10
This attribute gives the current send rate on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpMaxTxRate 1.3.6.1.4.1.562.36.2.1.110.13.11.1.11
This attribute give the maximum send rate on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpMinTxRate 1.3.6.1.4.1.562.36.2.1.110.13.11.1.12
This attribute gives the minimum send rate on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpCurRxRate 1.3.6.1.4.1.562.36.2.1.110.13.11.1.13
This attribute gives the current receive rate on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpMaxRxRate 1.3.6.1.4.1.562.36.2.1.110.13.11.1.14
This attribute gives the maximum receive rate on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpMinRxRate 1.3.6.1.4.1.562.36.2.1.110.13.11.1.15
This attribute gives the minimum receive rate on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpBurstSize 1.3.6.1.4.1.562.36.2.1.110.13.11.1.16
This attribute gives the current burst size on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpUptime 1.3.6.1.4.1.562.36.2.1.110.13.11.1.17
This attribute gives the total uptime of this High Performance Routing-Rapid Transport Protocol pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

mscAppnRtpSmoothRoundTripTime 1.3.6.1.4.1.562.36.2.1.110.13.11.1.18
This attribute gives the smoothed round-trip time on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpLastRoundTripTime 1.3.6.1.4.1.562.36.2.1.110.13.11.1.19
This attribute gives the last round-trip time on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpShortReqTimer 1.3.6.1.4.1.562.36.2.1.110.13.11.1.20
This attribute gives the short request timer duration on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAppnRtpShortReqTimeouts 1.3.6.1.4.1.562.36.2.1.110.13.11.1.21
This attribute counts the number of short request timer timeouts on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpIdleTimeouts 1.3.6.1.4.1.562.36.2.1.110.13.11.1.22
This attribute count the number of idle timer timeouts on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpRxInvalidSnaFrames 1.3.6.1.4.1.562.36.2.1.110.13.11.1.23
This attribute counts the number of invalid SNA frames received on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpInSessionControlFrames 1.3.6.1.4.1.562.36.2.1.110.13.11.1.24
This attribute counts the number of Session Control frames received on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnRtpOutSessionControlFrames 1.3.6.1.4.1.562.36.2.1.110.13.11.1.25
This attribute counts the number of Session Control frames sent on this pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlu 1.3.6.1.4.1.562.36.2.1.110.14
OBJECT IDENTIFIER    

mscAppnDluRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.14.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDlu components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluRowStatusEntry

mscAppnDluRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.14.1.1
A single entry in the table represents a single mscAppnDlu component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluRowStatusEntry  

mscAppnDluRowStatus 1.3.6.1.4.1.562.36.2.1.110.14.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlu components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDluComponentName 1.3.6.1.4.1.562.36.2.1.110.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDluStorageType 1.3.6.1.4.1.562.36.2.1.110.14.1.1.4
This variable represents the storage type value for the mscAppnDlu tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDluIndex 1.3.6.1.4.1.562.36.2.1.110.14.1.1.10
This variable represents the index for the mscAppnDlu tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

mscAppnDluOperTable 1.3.6.1.4.1.562.36.2.1.110.14.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The group contains the operational data for a dependent LU session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluOperEntry

mscAppnDluOperEntry 1.3.6.1.4.1.562.36.2.1.110.14.10.1
An entry in the mscAppnDluOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluOperEntry  

mscAppnDluSscpSessActive 1.3.6.1.4.1.562.36.2.1.110.14.10.1.1
This attribute tells whether the SSCP-LU session is active
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

mscAppnDluPluSessActive 1.3.6.1.4.1.562.36.2.1.110.14.10.1.2
This attribute tells whether the dependent LU session is active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

mscAppnDluDlusName 1.3.6.1.4.1.562.36.2.1.110.14.10.1.3
This attribute tells the name of the dependent LU server name that this dependent LU is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDluPluName 1.3.6.1.4.1.562.36.2.1.110.14.10.1.4
This attribute tells the partner LU name of this dependent LU if the LU is connected, it is a NULL string if the dependent LU does not have an active session with a partner LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDluNauAddress 1.3.6.1.4.1.562.36.2.1.110.14.10.1.5
This attribute gives the NAU address of the dependent LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnDluSscp 1.3.6.1.4.1.562.36.2.1.110.14.100
OBJECT IDENTIFIER    

mscAppnDluSscpRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.14.100.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDluSscp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluSscpRowStatusEntry

mscAppnDluSscpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1
A single entry in the table represents a single mscAppnDluSscp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluSscpRowStatusEntry  

mscAppnDluSscpRowStatus 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDluSscp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDluSscpComponentName 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDluSscpStorageType 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.4
This variable represents the storage type value for the mscAppnDluSscp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDluSscpIndex 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.10
This variable represents the index for the mscAppnDluSscp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDluSscpStatsTable 1.3.6.1.4.1.562.36.2.1.110.14.100.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluSscpStatsEntry

mscAppnDluSscpStatsEntry 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1
An entry in the mscAppnDluSscpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluSscpStatsEntry  

mscAppnDluSscpRxRuSize 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluSscpMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluSscpMaxRxBtuSize 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluSscpMaxTxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.4
This is the maximum size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluSscpCurTxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.5
This is the current size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluSscpMaxRxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.6
This is the maximum size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluSscpCurRxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.7
This is the current size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluSscpTxDataframes 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluSscpTxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluSscpTxDataBytes 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluSscpRxDataFrames 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluSscpRxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluSscpRxDataBytes 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluSscpSidh 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.14
This attribute contains the session identifier high byte on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnDluSscpSidl 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.15
This attribute contains the session ID low byte on the SSCP session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnDluSscpOdai 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

mscAppnDluSscpLsName 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnDluUsStat 1.3.6.1.4.1.562.36.2.1.110.14.101
OBJECT IDENTIFIER    

mscAppnDluUsStatRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.14.101.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDluUsStat components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluUsStatRowStatusEntry

mscAppnDluUsStatRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1
A single entry in the table represents a single mscAppnDluUsStat component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluUsStatRowStatusEntry  

mscAppnDluUsStatRowStatus 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDluUsStat components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDluUsStatComponentName 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDluUsStatStorageType 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.4
This variable represents the storage type value for the mscAppnDluUsStat tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDluUsStatIndex 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.10
This variable represents the index for the mscAppnDluUsStat tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDluUsStatStatsTable 1.3.6.1.4.1.562.36.2.1.110.14.101.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluUsStatStatsEntry

mscAppnDluUsStatStatsEntry 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1
An entry in the mscAppnDluUsStatStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluUsStatStatsEntry  

mscAppnDluUsStatRxRuSize 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluUsStatMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluUsStatMaxRxBtuSize 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluUsStatMaxTxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.4
This is the maximum size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluUsStatCurTxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.5
This is the current size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluUsStatMaxRxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.6
This is the maximum size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluUsStatCurRxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.7
This is the current size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluUsStatTxDataframes 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluUsStatTxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluUsStatTxDataBytes 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluUsStatRxDataFrames 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluUsStatRxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluUsStatRxDataBytes 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluUsStatSidh 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.14
This attribute contains the session identifier high byte on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnDluUsStatSidl 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.15
This attribute contains the session ID low byte on the SSCP session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnDluUsStatOdai 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

mscAppnDluUsStatLsName 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnDluDsStat 1.3.6.1.4.1.562.36.2.1.110.14.102
OBJECT IDENTIFIER    

mscAppnDluDsStatRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.14.102.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDluDsStat components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluDsStatRowStatusEntry

mscAppnDluDsStatRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1
A single entry in the table represents a single mscAppnDluDsStat component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluDsStatRowStatusEntry  

mscAppnDluDsStatRowStatus 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDluDsStat components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDluDsStatComponentName 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDluDsStatStorageType 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.4
This variable represents the storage type value for the mscAppnDluDsStat tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDluDsStatIndex 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.10
This variable represents the index for the mscAppnDluDsStat tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDluDsStatStatsTable 1.3.6.1.4.1.562.36.2.1.110.14.102.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDluDsStatStatsEntry

mscAppnDluDsStatStatsEntry 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1
An entry in the mscAppnDluDsStatStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDluDsStatStatsEntry  

mscAppnDluDsStatRxRuSize 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluDsStatMaxTxBtuSize 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluDsStatMaxRxBtuSize 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnDluDsStatMaxTxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.4
This is the maximum size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluDsStatCurTxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.5
This is the current size of the send pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluDsStatMaxRxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.6
This is the maximum size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluDsStatCurRxPacWin 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.7
This is the current size of the receive pacing window on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

mscAppnDluDsStatTxDataframes 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluDsStatTxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluDsStatTxDataBytes 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluDsStatRxDataFrames 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluDsStatRxFmdFrames 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluDsStatRxDataBytes 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDluDsStatSidh 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.14
This attribute contains the session identifier high byte on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnDluDsStatSidl 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.15
This attribute contains the session ID low byte on the SSCP session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAppnDluDsStatOdai 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

mscAppnDluDsStatLsName 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..8)  

mscAppnDlus 1.3.6.1.4.1.562.36.2.1.110.15
OBJECT IDENTIFIER    

mscAppnDlusRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.15.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDlus components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlusRowStatusEntry

mscAppnDlusRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.15.1.1
A single entry in the table represents a single mscAppnDlus component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlusRowStatusEntry  

mscAppnDlusRowStatus 1.3.6.1.4.1.562.36.2.1.110.15.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDlus components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAppnDlusComponentName 1.3.6.1.4.1.562.36.2.1.110.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDlusStorageType 1.3.6.1.4.1.562.36.2.1.110.15.1.1.4
This variable represents the storage type value for the mscAppnDlus tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDlusIndex 1.3.6.1.4.1.562.36.2.1.110.15.1.1.10
This variable represents the index for the mscAppnDlus tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..17)  

mscAppnDlusOperTable 1.3.6.1.4.1.562.36.2.1.110.15.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Information on the DLUR-DLUS pipe.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlusOperEntry

mscAppnDlusOperEntry 1.3.6.1.4.1.562.36.2.1.110.15.10.1
An entry in the mscAppnDlusOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlusOperEntry  

mscAppnDlusPrimaryDlus 1.3.6.1.4.1.562.36.2.1.110.15.10.1.1
This attribute indicates if this is the pipe to the primary default dependent LU server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAppnDlusPipeState 1.3.6.1.4.1.562.36.2.1.110.15.10.1.2
This attribute indicates the current state of the DLUR-DLUS pipe. inactive indicates the pipe is not connected (the session has likely failed), pendingActive indicates the pipe is connecting, active indicates the pipe is currently connected and data is flowing, and pendingInactive indicates the pipe is being disconnected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), pendingActive(1), active(2), pendingInactive(3)  

mscAppnDlusActivePUs 1.3.6.1.4.1.562.36.2.1.110.15.10.1.3
This attribute indicates the number of active physical units using the pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..32767  

mscAppnDlusDlusStatTable 1.3.6.1.4.1.562.36.2.1.110.15.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the counters and statistics for the DLUR-DLUS pipe
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDlusDlusStatEntry

mscAppnDlusDlusStatEntry 1.3.6.1.4.1.562.36.2.1.110.15.11.1
An entry in the mscAppnDlusDlusStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDlusDlusStatEntry  

mscAppnDlusReqActPuTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.1
This attribute counts the number of REQACTPUs sent to the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusReqActPuRspRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.2
This attribute counts the number of REQACTPU responses received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusActPuRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.3
This attributes counts the number of ACTPUs received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusActPuRspTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.4
This attribute counts the number of ACTPU responses sent to the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusReqDactPuTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.5
This attribute counts the number of REQDACTPUs sent to the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusReqDactPuRspRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.6
This attribute counts the number of REQDACTPU responses received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusDactPuRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.7
This attribute counts the number of DACTPUs received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusDactPuRspTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.8
This attribute counts the number of DACTPU responses received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusActLuRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.9
This attribute counts the number of ACTLUs received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusActLuRspTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.10
This attribute counts the number of ACTLU responses sent to the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusDactLuRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.11
This attribute counts the number of DACTLUs received from the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusDactLuRspTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.12
This attribute counts the number of DACTLU responses sent to the DLUS. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusSscpPuMuRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.13
This attribute counts the number of SSCP-PU MUs received. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusSscpPuMuTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.14
This attribute counts the number of SSCP-PU MUs sent. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusSscpLuMuRx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.15
This attributes counts the number of SSCP-LU MUs received. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDlusSscpLuMuTx 1.3.6.1.4.1.562.36.2.1.110.15.11.1.16
This attributes counts the number of SSCP-LU MUs sent. The counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscAppnDLUR 1.3.6.1.4.1.562.36.2.1.110.16
OBJECT IDENTIFIER    

mscAppnDLURRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.16.1
This entry controls the addition and deletion of mscAppnDLUR components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDLURRowStatusEntry

mscAppnDLURRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.16.1.1
A single entry in the table represents a single mscAppnDLUR component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDLURRowStatusEntry  

mscAppnDLURRowStatus 1.3.6.1.4.1.562.36.2.1.110.16.1.1.1
This variable is used as the basis for SNMP naming of mscAppnDLUR components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnDLURComponentName 1.3.6.1.4.1.562.36.2.1.110.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnDLURStorageType 1.3.6.1.4.1.562.36.2.1.110.16.1.1.4
This variable represents the storage type value for the mscAppnDLUR tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnDLURIndex 1.3.6.1.4.1.562.36.2.1.110.16.1.1.10
This variable represents the index for the mscAppnDLUR tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnDLURDlurParmsTable 1.3.6.1.4.1.562.36.2.1.110.16.2
These parameters define the dependent LU requester options.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnDLURDlurParmsEntry

mscAppnDLURDlurParmsEntry 1.3.6.1.4.1.562.36.2.1.110.16.2.1
An entry in the mscAppnDLURDlurParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnDLURDlurParmsEntry  

mscAppnDLURPrimaryDefDlusName 1.3.6.1.4.1.562.36.2.1.110.16.2.1.2
The fully qualified CP name of the node that will serve as the primary dependent LU server (DLUS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(3..17)  

mscAppnDLURSecondaryDefDlusName 1.3.6.1.4.1.562.36.2.1.110.16.2.1.3
The fully qualified CP name of the node that will serve as the backup or secondary dependent LU server (DLUS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..17)  

mscAppnDLURDlusRetryTimeout 1.3.6.1.4.1.562.36.2.1.110.16.2.1.4
This attribute specifies the time in seconds before a network search to locate a DLUS times out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscAppnDLURDlusRetryLimit 1.3.6.1.4.1.562.36.2.1.110.16.2.1.5
This attribute specifies the maximum number of retry attempts that will be made after an initial failure to contact a DLUS. If zero is specifed, APPN will retry indefinitely. When this limit has been reached, downstream PUs that are connected to APPN will be sent a QDISC frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAppnCos 1.3.6.1.4.1.562.36.2.1.110.17
OBJECT IDENTIFIER    

mscAppnCosRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.17.1
This entry controls the addition and deletion of mscAppnCos components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnCosRowStatusEntry

mscAppnCosRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.17.1.1
A single entry in the table represents a single mscAppnCos component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnCosRowStatusEntry  

mscAppnCosRowStatus 1.3.6.1.4.1.562.36.2.1.110.17.1.1.1
This variable is used as the basis for SNMP naming of mscAppnCos components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnCosComponentName 1.3.6.1.4.1.562.36.2.1.110.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnCosStorageType 1.3.6.1.4.1.562.36.2.1.110.17.1.1.4
This variable represents the storage type value for the mscAppnCos tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnCosIndex 1.3.6.1.4.1.562.36.2.1.110.17.1.1.10
This variable represents the index for the mscAppnCos tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

mscAppnCosProvTable 1.3.6.1.4.1.562.36.2.1.110.17.104
This provisioning group specifies the transmission priority associated with a Class of Service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnCosProvEntry

mscAppnCosProvEntry 1.3.6.1.4.1.562.36.2.1.110.17.104.1
An entry in the mscAppnCosProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnCosProvEntry  

mscAppnCosTransmissionPriority 1.3.6.1.4.1.562.36.2.1.110.17.104.1.1
This attribute specifies the transmission priority of session traffic using this class of service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

mscAppnCosTg 1.3.6.1.4.1.562.36.2.1.110.17.10
OBJECT IDENTIFIER    

mscAppnCosTgRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.17.10.1
This entry controls the addition and deletion of mscAppnCosTg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnCosTgRowStatusEntry

mscAppnCosTgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1
A single entry in the table represents a single mscAppnCosTg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnCosTgRowStatusEntry  

mscAppnCosTgRowStatus 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.1
This variable is used as the basis for SNMP naming of mscAppnCosTg components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnCosTgComponentName 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnCosTgStorageType 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.4
This variable represents the storage type value for the mscAppnCosTg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnCosTgIndex 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.10
This variable represents the index for the mscAppnCosTg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

mscAppnCosTgProvTable 1.3.6.1.4.1.562.36.2.1.110.17.10.10
This group specifies a range of TG characteristics for a class of service and is used in route selection for session traffic. During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnCosTgProvEntry

mscAppnCosTgProvEntry 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1
An entry in the mscAppnCosTgProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnCosTgProvEntry  

mscAppnCosTgMinEffectiveCapacity 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.1
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable speed for a TG using this Class of Service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), max(255)  

mscAppnCosTgMaxEffectiveCapacity 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.2
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable speed for a TG using this Class of Service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), max(255)  

mscAppnCosTgMinConnectCost 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.3
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost-per-connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG(as in the case of a non-switched facility).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMaxConnectCost 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.4
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost per connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG (as in the case of a non-switched facility).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMinByteCost 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.5
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMaxByteCost 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.6
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMinSecurity 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.7
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum level of security protection required for a TG to be allowed to route session traffic. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided guardedConduit - guarded conduit; protected against physical tapping secureConduit- secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, for example satellite-connected, located in a nonsecure country.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

mscAppnCosTgMaxSecurity 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.8
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum level of security protection required for a TG to be allowed to route session traffic. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided guardedConduit - guarded conduit; protected against physical tapping secureConduit- secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, for example. satellite-connected, located in a nonsecure country.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

mscAppnCosTgMinPropDelay 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.9
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum propagation delay for this Class of Service. Propogation delay is the length of time that it takes for a signal to propagate from one end of the TG to the other. Possible values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153), maximum(255)  

mscAppnCosTgMaxPropDelay 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.10
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum propagation delay for this Class of Service. Propagation delay is the length of time that it takes for a signal to propagate from one end of the TG to the other. Possible values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153), maximum(255)  

mscAppnCosTgMinModemClass 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.11
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum modem class allowed for a TG to carry session traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMaxModemClass 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.12
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum modem class allowed for a TG to carry session traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMinUserDefParm1 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.13
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMaxUserDefParm1 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.14
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable value for user defined routing parameter number 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMinUserDefParm2 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.15
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMaxUserDefParm2 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.16
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable value for user defined routing parameter number 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMinUserDefParm3 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.17
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosTgMaxUserDefParm3 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.18
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and contains the maximum acceptable value for user defined routing parameter number 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosNode 1.3.6.1.4.1.562.36.2.1.110.17.11
OBJECT IDENTIFIER    

mscAppnCosNodeRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.17.11.1
This entry controls the addition and deletion of mscAppnCosNode components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnCosNodeRowStatusEntry

mscAppnCosNodeRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1
A single entry in the table represents a single mscAppnCosNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnCosNodeRowStatusEntry  

mscAppnCosNodeRowStatus 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.1
This variable is used as the basis for SNMP naming of mscAppnCosNode components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnCosNodeComponentName 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnCosNodeStorageType 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.4
This variable represents the storage type value for the mscAppnCosNode tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnCosNodeIndex 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.10
This variable represents the index for the mscAppnCosNode tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

mscAppnCosNodeProvTable 1.3.6.1.4.1.562.36.2.1.110.17.11.10
This group specifies a range of node characteristics for a class of service and is used in route selection for session traffic. During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnCosNodeProvEntry

mscAppnCosNodeProvEntry 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1
An entry in the mscAppnCosNodeProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnCosNodeProvEntry  

mscAppnCosNodeMinRouteAddResistance 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.1
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum route addition resistance value allowed for a node to route session traffic. Route addition resistance defines the desirability for a network node to perform additional intermediate session routing. The higher the value, the less desirable the node is for session routing purposes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosNodeMaxRouteAddResistance 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.2
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum route addition resistance value allowed for a node to route session traffic. Route addition resistance defines the desirability for a network node to perform additional intermediate session routing. The higher the value, the less desirable the node is for session routing purposes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mscAppnCosNodeMinStatus 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.3
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum congestion value that will be allowed for a node to carry session traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uncongested(0), congested(1)  

mscAppnCosNodeMaxStatus 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.4
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum congestion value that will be allowed for a node to carry session traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uncongested(0), congested(1)  

mscAppnFrSvc 1.3.6.1.4.1.562.36.2.1.110.18
OBJECT IDENTIFIER    

mscAppnFrSvcRowStatusTable 1.3.6.1.4.1.562.36.2.1.110.18.1
This entry controls the addition and deletion of mscAppnFrSvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnFrSvcRowStatusEntry

mscAppnFrSvcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.110.18.1.1
A single entry in the table represents a single mscAppnFrSvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnFrSvcRowStatusEntry  

mscAppnFrSvcRowStatus 1.3.6.1.4.1.562.36.2.1.110.18.1.1.1
This variable is used as the basis for SNMP naming of mscAppnFrSvc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAppnFrSvcComponentName 1.3.6.1.4.1.562.36.2.1.110.18.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAppnFrSvcStorageType 1.3.6.1.4.1.562.36.2.1.110.18.1.1.4
This variable represents the storage type value for the mscAppnFrSvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAppnFrSvcIndex 1.3.6.1.4.1.562.36.2.1.110.18.1.1.10
This variable represents the index for the mscAppnFrSvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAppnFrSvcBanTable 1.3.6.1.4.1.562.36.2.1.110.18.10
This group contains the BAN device MAC and SAP parameters for the APPN service Frame Relay SVC calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnFrSvcBanEntry

mscAppnFrSvcBanEntry 1.3.6.1.4.1.562.36.2.1.110.18.10.1
An entry in the mscAppnFrSvcBanTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnFrSvcBanEntry  

mscAppnFrSvcBanLocalMac 1.3.6.1.4.1.562.36.2.1.110.18.10.1.1
This attribute specifies the MAC address to be used for Frame Relay SVCs with BAN encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DashedHexString Size(6)  

mscAppnFrSvcBanLocalSap 1.3.6.1.4.1.562.36.2.1.110.18.10.1.2
This attribute specifies the local SAP number to be used for Frame Relay SVCs with BAN encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

mscAppnFrSvcProvisionedTable 1.3.6.1.4.1.562.36.2.1.110.18.11
This group contains the provisonable parameters for the APPN service Frame Relay SVC calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnFrSvcProvisionedEntry

mscAppnFrSvcProvisionedEntry 1.3.6.1.4.1.562.36.2.1.110.18.11.1
An entry in the mscAppnFrSvcProvisionedTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnFrSvcProvisionedEntry  

mscAppnFrSvcMaximumFrameRelaySvcs 1.3.6.1.4.1.562.36.2.1.110.18.11.1.1
This attribute specifies the maximum number of concurrently active Frame Relay SVC calls that are allowed for this service. This attribute does not include the general switched virtual circuits (GSVC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3072  

mscAppnFrSvcRateEnforcement 1.3.6.1.4.1.562.36.2.1.110.18.11.1.2
This attribute specifies whether rate enforcement is to be used for new Frame Relay SVCs on this service. When rate enforcement is on the rate of data sent by the service to individual Frame Relay SVCs is controlled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscAppnFrSvcMaximumCir 1.3.6.1.4.1.562.36.2.1.110.18.11.1.4
This attribute specifies the maximum rate enforcement CIR (Committed Information Rate) that is allowed for use with the Frame Relay SVCs on this service. During call setup negotiation, if the caller to this service requests a higher CIR value be used, the CIR used is reduced to the value of maximumCir.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..52000000  

mscAppnFrSvcOperationalTable 1.3.6.1.4.1.562.36.2.1.110.18.12
This group contains the operational attributes for the APPN Frame Relay SVC calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAppnFrSvcOperationalEntry

mscAppnFrSvcOperationalEntry 1.3.6.1.4.1.562.36.2.1.110.18.12.1
An entry in the mscAppnFrSvcOperationalTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAppnFrSvcOperationalEntry  

mscAppnFrSvcCurrentNumberOfSvcCalls 1.3.6.1.4.1.562.36.2.1.110.18.12.1.1
This attribute indicates the number of Frame Relay SVCs currently existing on this service. This attribute does not include the general switched virtual circuits (GSVC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..3072  

appnGroup 1.3.6.1.4.1.562.36.2.2.29.1
OBJECT IDENTIFIER    

appnGroupCA 1.3.6.1.4.1.562.36.2.2.29.1.1
OBJECT IDENTIFIER    

appnGroupCA02 1.3.6.1.4.1.562.36.2.2.29.1.1.3
OBJECT IDENTIFIER    

appnGroupCA02DevelopmentLoad 1.3.6.1.4.1.562.36.2.2.29.1.1.3.1
OBJECT IDENTIFIER    

appnGroupCA0214 1.3.6.1.4.1.562.36.2.2.29.1.1.3.1.14
OBJECT IDENTIFIER    

appnGroupCA0214A 1.3.6.1.4.1.562.36.2.2.29.1.1.3.1.14.1
OBJECT IDENTIFIER    

appnCapabilities 1.3.6.1.4.1.562.36.2.2.29.3
OBJECT IDENTIFIER    

appnCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.29.3.1
OBJECT IDENTIFIER    

appnCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.29.3.1.3
OBJECT IDENTIFIER    

appnCapabilitiesCA02DevelopmentLoad 1.3.6.1.4.1.562.36.2.2.29.3.1.3.1
OBJECT IDENTIFIER    

appnCapabilitiesCA0214 1.3.6.1.4.1.562.36.2.2.29.3.1.3.1.14
OBJECT IDENTIFIER    

appnCapabilitiesCA0214A 1.3.6.1.4.1.562.36.2.2.29.3.1.3.1.14.1
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor